Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 596

Reformat results as: short short into frame detailed detailed into frame

_id	ijac202018202
id	ijac202018202
authors	Pasquero, Claudia and Marco Poletto
year	2020
title	Bio-digital aesthetics as value system of post-Anthropocene architecture
source	International Journal of Architectural Computing vol. 18 - no. 2, 120-140
summary	It is timely within the Anthropocene era, more than ever before, to search for a non-anthropocentric mode of reasoning, and consequently designing. The PhotoSynthetica Consortium, established in 2018 and including London-based ecoLogicStudio, the Urban Morphogenesis Lab (Bartlett School of Architecture, University College London) and the Synthetic Landscape Lab (University of Innsbruck, Austria), has therefore been pursuing architecture as a research-based practice, exploring the interdependence of digital and biological intelligence in design by working directly with non-human living organisms. The research focuses on the diagrammatic capacity of these organisms in the process of growing and becoming part of complex bio-digital architectures. A key remit is training architects’ sensibility at recognising patterns of reasoning across disciplines, materialities and technological regimes, thus expanding the practice’s repertoire of aesthetic qualities. Recent developments in evolutionary psychology demonstrate that the human sense of beauty and pleasure is part of a co-evolutionary system of mind and surrounding environment. In these terms, human senses of beauty and pleasure have evolved as selection mechanisms. Cultivating and enhancing them compensate and integrate the functions of logical thinking to gain a systemic view on the planet Earth and the dramatic changes it is currently undergoing. This article seeks to illustrate, through a series of recent research projects, how a renewed appreciation of beauty in architecture has evolved into an operational tool to design and measure its actual ecological intelligence.
keywords	Bio-digital, bio-computation, bio-city, effectiveness, empathy, impact, sensing
series	journal
email
last changed	2020/11/02 13:34

_id	caadria2018_232
id	caadria2018_232
authors	Poustinchi, Ebrahim, Wang, Shengmian and Luhan, Gregory
year	2018
title	No Keyboard, No Mouse - Hybrid Digital-Analog Hardware Design for Enhancing Design UI and UX
doi	https://doi.org/10.52842/conf.caadria.2018.1.535
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 535-544
summary	This paper presents a mixed-method research design investigation that integrates a Hybrid Digital-Analog Software-Hardware protocol referred to as the No Keyboard, No Mouse (NK-NM) platform. The NK-NM process uses both theoretical and applied research mechanisms to measure its influence on architectural design decision-making, knowledge exchange, student learning, aesthetics, and user experience in the context of an undergraduate architectural design studio. Observing a recognized gap in the current digital architectural design environments this paper details how the NK-NM protocol bridges this gap through an instructed hierarchical design process, customizable physical interface, and iterative simulation-based feedback loop.
keywords	Digital Hardware; Digital Design; Pedagogy; Human-computer Interaction; Physical computation
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaade2018_172
id	ecaade2018_172
authors	Al-Douri, Firas
year	2018
title	The Employment of Digital Simulation in the Planning Departments in US Cities - How does it affect design and decision-making processes?
doi	https://doi.org/10.52842/conf.ecaade.2018.2.539
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 539-548
summary	The increased interactivity of digital simulation tools has offered a wide range of opportunities that may provoke a paradigmatic shift in urban design practice. Yet, research results did not provide any clear evidence that such shift seems to exist. Further studies are required to examine the methods and impact of their usage on decision-making and design outcome. To that goal, this research uses the single-case study design that has been pursued in three phases: literature review, online survey, and semi-structured interviews. The results have shown inadequacies, inconsistency, and ineffectiveness of usage of the tools that are most appropriate to the design activities of each phase and thus a limited impact on critical areas of the decision-making. The impact of the tools' usage is found to be correlated with not only the extent of their usage, but also with a variety of procedural and substantive factors such as the plan methodology, extent of tool's usage, choice of the appropriate tool, and planners' skills and capabilities in using those tools.
keywords	Urban Simulation ; Urban Design Practice
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_309
id	ecaade2018_309
authors	Aºut, Serdar, Eigenraam, Peter and Christidi, Nikoletta
year	2018
title	Re-flex: Responsive Flexible Mold for Computer Aided Intuitive Design and Materialization
doi	https://doi.org/10.52842/conf.ecaade.2018.1.717
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 717-726
summary	The paper presents an ongoing research about the design and a possible use of a responsive flexible mold. The mold is developed by integrating its precedents with automation and Human-Computer Interaction (HCI). The objective of the design is to provide an immersive design tool which has direct link to fabrication. It allows intuitive interaction to its user in order to help with the design and production of complex forms by supporting the designer's implicit skills with computer. The paper presents the design by illustrating the use of the hardware such as the actuators, the sensor and the projector; and by defining the workflow within the software. The paper concludes with the description of a possible use case in which the system is used to design and materialize an object in different scales.
keywords	Design tools development; Digital fabrication and robotics; Human-computer interaction in design; Shape, form and geometry; Inventive Making
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac201816405
id	ijac201816405
authors	Poustinch, Ebrahimi
year	2018
title	Subtractive digital fabrication with actual robot and virtual material using a MARI platform
source	International Journal of Architectural Computing vol. 16 - no. 4, 281-294
summary	This article presents a project-based research study using a new hybrid augmented reality platform called the Mixed Architectural Robotic Interface. Using the Mixed Architectural Robotic Interface as a mixture of different software and hardware platforms, ranging from design/modeling software, simulation engine, and an augmented reality application, the designer would be able to evaluate the possibilities/limitations of the fabrication, in real time and as part of the design. This method advances designer’s understanding of the fabrication equipment as an input for the design decision-making process. This article demonstrates the potential of a virtual/actual hybridized platform as a new medium to design, simulate, and evaluate, in order to enhance the digital design and fabrication. Introducing the possibility of real-time communication between the digital design software and the fabrication platforms as well as the augmented reality simulation of the fabrication process, the Mixed Architectural Robotic Interface enables designers to test the fabrication process with the fabrication equipment in the early stages of the design process. This method makes it possible to move beyond the traditional limitations of machines pursuing “un-expected creativity,” without any additional time or cost for the process. Using the virtual material for fabrication, the Mixed Architectural Robotic Interface reduces the time and cost of having multiple iterations and encourages the hands-on experimental use of the fabrication tool (in this article robotic/computer numeric control milling) not only as a production tool but also as a design study tool.
keywords	Design, robotics, augmented reality, digital fabrication, computer numeric control milling, virtual material
series	journal
email
last changed	2019/08/07 14:04

_id	ecaade2018_261
id	ecaade2018_261
authors	Austern, Guy, Capeluto, Isaac Guedi and Grobman, Yasha Jacob
year	2018
title	Rationalization and Optimization of Concrete Façade Panels
doi	https://doi.org/10.52842/conf.ecaade.2018.1.727
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 727-734
summary	The presented research develops methods for introducing fabrication constraints into architectural design, a process often referred to as design rationalization. In the first stage of the research, a computational method for evaluating the fabrication potential of geometries was developed. The method predicts the feasibility, material use and machining time of a geometry in relation to different fabrication techniques. It uses geometric properties to mathematically estimate these parameters without simulating the actual machining. The second stage of the research describes processes for adapting architectural designs to their fabrication technique. The evaluation method previously developed is used as a fitness criterion for a computational optimization algorithm aimed at adapting concrete façade elements to the fabrication constraints of their molds. A case study demonstrates how the optimization process succeeded in improving the feasibility of different geometries within a time-frame suitable to the architectural design process, and without significant changes to the initial design.
keywords	Optimization; Digital Fabrication; Rationalization; Computational Design Process
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia18_136
id	acadia18_136
authors	Austern, Guy; Capeluto, Isaac Guedi; Grobman, Yasha Jacob
year	2018
title	Fabrication-Aware Design of Concrete Façade Panels. A Computational Method For Evaluating the Fabrication of Large- Scale Molds in Complex Geometries
doi	https://doi.org/10.52842/conf.acadia.2018.136
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 136-145
summary	This paper presents a design methodology for concrete façade panels that takes into consideration constraints related to digital fabrication machinery. A computational method for the real-time evaluation of industrial mold-making techniques, such as milling and hot wire cutting, was developed. The method rapidly evaluates the feasibility, material use, and machining time of complex geometry molds for architectural façade elements. Calculation speed is achieved by mathematically approximating CAM-machining operations. As results are obtained in nearly real time, the method can be easily incorporated into the architectural design process during its initial stages, when changes to the design are more effective. In the paper, we describe the algorithms of the computational evaluation method. We also show how it can be used to introduce fabrication considerations into the design process by using it to rationalize several types of panels. Additionally, we demonstrate how the method can be used in complex, large-scale architectural projects to save machining time and materials by evaluating and altering the paneling subdivision.
keywords	full paper, fabrication & robotics, digital fabrication, performance + simulation, geometry
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	sigradi2018_1358
id	sigradi2018_1358
authors	Heesterman, Mikayla; Sweet, Kevin
year	2018
title	Robotic Connections: Customisable Joints for Timber Construction
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 644-652
summary	Timber is one of the most sustainable, renewable products, and coupled with computational tools has the potential to be redefined as a digital-age material. The research outlined in this paper employs contemporary digital fabrication techniques utilising a robotic arm to develop complex, CNC based parametric connections for engineered timber. While CNC joinery that utilizes three - five axis machining capabilities is increasingly common, the introduction of the six-axis robot as a machining tool provides greater freedom of movement and a wider range of complex procedures. This research returns to traditional Japanese timber craft, which offers unique structural and sustainable advantages. Using computational tools, new complex parametric connections suitable for contemporary fabrication will be designed and contribute to a library of joints suitable mass-customised in non-standard timber architecture.
keywords	Robotics; Fabrication; Parametric; Timber; Architecture
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_215
id	ecaade2018_215
authors	Mohite, Ashish, Kochneva, Mariia and Kotnik, Toni
year	2018
title	Material Agency in CAM of Undesignable Textural Effects - The study of correlation between material properties and textural formation engendered by experimentation with G-code of 3D printer
doi	https://doi.org/10.52842/conf.ecaade.2018.2.293
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 293-300
summary	This paper presents intermediate results of an experimental research directed towards development of a method to use additive manufacturing technology as a generative agent in architectural design process. The primary technique is to variate speed of material deposition of a 3D printer in order to produce undetermined textural effects. These effects demonstrate local variation of material distribution, which is treated as a consequence of interaction between machining parameters and material properties. Current stage of inquiry is concerned with studying material agency by using two different materials as variables in the same experimental setup. The results suggest potential benefits for mass-customized fabrication and deeper understanding of how different materials can be employed in the same manufacturing system to achieve a range of effective behaviors.
keywords	digital fabrication; digital craft
series	eCAADe
email
last changed	2022/06/07 07:58

_id	sigradi2018_1629
id	sigradi2018_1629
authors	Braida, Frederico; Chagas, Icaro; Ruback Cascardo de Almeida, Isabela; Mendes de Castro, Janaina
year	2018
title	The Maker Culture and the Open Source Model in the Architecture, Urbanism and Design Context: The Fabrication and Sharing of a Game for Design Teaching
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1298-1304
summary	This article aims to present a discussion about the maker culture and an experience of fabricating and sharing a set of building blocks designed as a didactic tool for teaching architectural design within the premises of do-it-yourself culture and an open source model. Methodologically, the article is the result of both a bibliographical research and an empirical research, from which, in contemporary times, is evidenced the strengthening of flexible, collaborative, creative and innovative processes, prevailing premises in the maker movement.
keywords	Maker culture; Open source; Teaching; Democratization; Digital culture
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_135
id	ecaade2018_135
authors	Briscoe, Danelle
year	2018
title	Living Wall - Information Workflow and Collaboration
doi	https://doi.org/10.52842/conf.ecaade.2018.1.207
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 207-212
summary	Beyond the benefits of standard documentation agreeance and project management coordination, many architects and other design professionals express concern over the limitation of Building Information Modelling (BIM) process may have on the design process, or better yet social responsibility or ecological benefit. For Living Wall facade exploration, this research suggests BIM is arguably an effective tool to support innovation in the design process, as well as promote collaboration between ecology and architecture disciplines. Ecological measures and data collection evidence further validates BIM procedural clarity and recognizes building façade exploration both technologically and environmentally.
keywords	Living Wall; BIM; data collection
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_227
id	ecaade2018_227
authors	Chatzitsakyris, Panagiotis
year	2018
title	EventMode - A new computational design tool for integrating human activity data within the architectural design workflow
doi	https://doi.org/10.52842/conf.ecaade.2018.1.649
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 649-656
summary	Architectural designers are currently depending on a multitude of elaborate computational tools in order to explore, manipulate and visualize the geometric form of their building projects. However, if architecture can be perceived as the manipulation of geometric form in direct relation to human activities and events that take place inside it, then it is evident that such design parameters are not sufficiently represented in the currently available modeling software. Would it be possible to introduce the human activity element in the aforementioned computational tools in a way that informs the design process and improves the final building product? This paper attempts to answer this question by introducing a new experimental design tool that enables the creation of parametric human activity envelopes within three-dimensional digital models. The novel approach is that this tool enables the parametric interaction of these components with the actual building geometry and generates novel visual and data representations of the 3D model. The goal is to improve the decision-making process of architects as well as their clients by enabling them to evaluate and iterate their designs based not only on the building's form but also on the human spatial events that take place inside it. A prototype implementation demonstrates the tool's practical application through three design examples.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2018_245
id	caadria2018_245
authors	Chowdhury, Shuva and Schnabel, Marc Aurel
year	2018
title	An Algorithmic Methodology to Predict Urban Form - An Instrument for Urban Design
doi	https://doi.org/10.52842/conf.caadria.2018.2.401
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 401-410
summary	We question the recent practices of conventional and participatory urban design approaches and offer a middle approach by exploring computational design tools in the design system. On the one hand, the top-down urban planning approaches investigate urban form as a holistic matter which only can be calibrated by urban professionals. These approaches are not able to offer enough information to the end users to predict the urban form. On the other hand, the bottom-up urban design approaches cannot visualise predicted urban scenarios, and most often the design decisions stay as general assumptions. We developed and tested a parametric design platform combines both approaches where all the stakeholders can participate and visualise multiple urban scenarios in real-time feedback. Parametric design along with CIM modelling system has influenced urban designers for a new endeavour in urban design. This paper presents a methodology to generate and visualise urban form. We present a novel decision-making platform that combines city level and local neighbourhood data to aid participatory urban design decisions. The platform allows for stakeholder collaboration and engagement in complex urban design processes.
keywords	knowledge-based system; algorithmic methodology ; design decision tool; urban form;
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2022_368
id	ecaade2022_368
authors	Das, Avishek, Brunsgaard, Camilla and Madsen, Claus Brondgaard
year	2022
title	Understanding the AR-VR Based Architectural Design Workflow among Selected Danish Architecture Practices
doi	https://doi.org/10.52842/conf.ecaade.2022.1.381
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 381–388
summary	Virtual reality (VR) and augmented reality (AR) have been proposed to be additional architectural design mediums for at least 25 years (Dagit, 1993). Despite rapid technical and technological development, it has not been adopted into architectural design practices as compared to academia and research. Surveys from the American Institute of Architects (AIA) and Royal Institutes of British Architects (RIBA) demonstrate the state of architectural practices; 72% of architects and 65% of architects respectively are not using any kind of virtual, augmented, or mixed reality in their practices(RIBA and Microsoft, 2018; Hampson, 2020). In this paper, the authors investigate the state of practices, issues, challenges, and opportunities of the utilization of virtual, augmented, and mixed realities in six architectural practices in the Danish context. Three of the practices are large architectural practices, one medium-sized practice specializing in institutional, healthcare and cultural architecture, and one firm designing private family houses, kindergartens, daycares and places for people with disability and, one experimental design studio. All these practices have used VR/AR in their projects to various degrees. In recent years Danish architectural practices have been involved in various VR/AR-based exhibitions, demonstrations, and tool developments to promote the usage of the same in design practice. Through a set of qualitative interviews with personnel from key architectural practices, the authors would like to demonstrate the present state of practices. The investigation explores the usage of VR and AR in Danish architecture practices by identifying challenges and opportunities regarding skill levels, architectural typology, use cases, toolchains, and workflow and shows similarities and differences between traditional and VR-based design processes. The main findings show how VR/AR-based visualization helps architects to perceive spatiality and also ushers creativity through immersion and overlays.
keywords	Virtual Reality, Augmented Reality, Architectural Design Practice, Denmark
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade2018_438
id	ecaade2018_438
authors	Das, Subhajit
year	2018
title	Interactive Artificial Life Based Systems, Augmenting Design Generation and Evaluation by Embedding Expert Opinion - A Human Machine dialogue for form finding.
doi	https://doi.org/10.52842/conf.ecaade.2018.1.085
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 85-94
summary	Evolution of natural life and subsequently selection of life forms is an interesting topic that has been explored multiple times. This area of research and its application has high relevance in evolutionary design and automated design generation. Taking inspiration from Charles Darwin's theory, all biological species were formed by the process of evolution based on natural selection of the fittest (Darwin, n.d.) this paper explains exploratory research showcasing semi-automatic design generation. This is realized by an interactive artificial selection tool, where the designer or the end user makes key decisions steering the propagation and breeding of future design artifacts. This paper, describes two prototypes and their use cases, highlighting interaction based optimal design selection. One of the prototypes explains a 2d organic shape creator using a metaball shape approach, while the other discusses a spatial layout generation technique for conceptual design.
keywords	design generation; implicit surfaces; artificial life; decision making; artificial selection; spatial layout generation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2018_347
id	ecaade2018_347
authors	Dokonal, Wolfgang
year	2018
title	Do Training Bikes Dream of Electric Cities ?
doi	https://doi.org/10.52842/conf.ecaade.2018.2.789
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 789-794
summary	Virtual reality (VR), Augmented Reality (AR) and Mixed Reality is making the headlines in the newspapers and magazines today. But unlike 25 years ago when the first VR rage started with the first Cave Automatic Virtual Environments (CAVE) infrastructures VR is now a technique that is available at very low costs.Especially the recent advances and developments in low cost VR hardware mainly the Head mounted displays (HMD), in particular those that use mobile phones but also the PC based systems like the Oculus Rift and the HTC Vive together with recent software developments allow this change. Naturally this is based on the interest of the Gaming Industry and the big players in the smartphone industry. But at the moment there are nearly no tools for architects available within these systems. In our point of view there is the big potential that these technologies can give new opportunities to architects and designers to use VR and AR as part of their design toolbox and not only as a presentation tool. For us this is the most important aspect. In our projects we therefore try to develop a workflow that can be easily used even without programming and scripting skills.
keywords	Virtual Reality; Interfaces
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2022_398
id	ecaade2022_398
authors	Dzurilla, Dalibor and Achten, Henri
year	2022
title	What’s Happening to Architectural Sketching? - Interviewing architects about transformation from traditional to digital architectural sketching as a communicational tool with clients
doi	https://doi.org/10.52842/conf.ecaade.2022.1.389
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 389–398
summary	The paper discusses 23 interviewed architects in practice about the role of traditional and digital sketching (human-computer interaction) in communication with the client. They were selected from 1995 to 2018 (the interval of graduation) from three different countries: the Czech Republic (CR), Slovakia (SR), Netherland (NR). To realize three blending areas that impact the approach to sketching: (I) Traditional hand and physical model studies (1995-2003). (II)Transition form - designing by hand and PC (2004–2017). (III) Mainly digital and remote forms of designing (2018–now). Interviews helped transform 31 “parameters of tools use” from the previous theoretical framework narrowed down into six main areas: (1) Implementation; (2)Affordability; (3)Timesaving; (4) Drawing support; (5) Representativeness; (6) Transportability. Paper discusses findings from interviewees: (A) Implementation issues are above time and price. (B) Strongly different understanding of what digital sketching is. From drawing in Google Slides by mouse to sketching in Metaverse. (C) Substantial reduction of traditional sketching (down to a total of 3% of the time) at the expense of growing responsibilities. (D) 80% of respondents do not recommend sketching in front of the client. Also, other interesting findings are further described in the discussion.
keywords	Architectural Sketch, Digital Sketch, Effective Visual Communication
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade2018_190
id	ecaade2018_190
authors	Gless, Henri-Jean, Halin, Gilles and Hanser, Damien
year	2018
title	Need of a BIM-agile Coach to Oversee Architectural Design - From one pedagogical experiment to another
doi	https://doi.org/10.52842/conf.ecaade.2018.1.445
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 445-450
summary	This paper is part of our research on the digital transition in architecture, and more particularly on the integration of BIM (Building Information Management) technology. Indeed, in the field of AEC in France, this transition is still ongoing and remains difficult for architects. BIM technology changes the way people work and communicate, and remains only a tool without a method behind it. His arrival then raises technical but also human questions. Our research then turns to the social sciences and project management sciences to see if the creation or adaptation of project management methods can facilitate this integration. In other fields such as industry, software engineering, or HMI design, we have seen the emergence of agile methods that focus more on design teams, and therefore communication, than on the process itself. After experimenting with several agile practices, we identified the need for a design team to be mentored by someone in the role of facilitator or coach. This article describes how we can transfer to students an agile practice called BIM-agile Coach that we experimented during a weeklong workshop.
keywords	Architectural design; Agile methods; Agile practices; BIM technology; Collaborative design; Project management
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2018_280
id	caadria2018_280
authors	Hanaoka, Ikuya, Tanaka, Seigo, Lee, Alric and Hotta, Kensuke
year	2018
title	Sight Depth Illusion with Perforated Plane - Evaluate in Mixed Reality with Head Mounted Display
doi	https://doi.org/10.52842/conf.caadria.2018.1.411
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 411-420
summary	This paper examines the existence of a visual illusion with depth of sight involving a perforated panel layered above another plane, evaluates the illusion's properties with virtual projection on a see-through, head-mounted display, and illustrates the relation between the veridical and perceived distances through a mathematical expression. The result would be indicative to egocentric spatial analysis research, and reveal potentials as a reference point for a new architectural design tool.
keywords	Sight Depth; Kansei Engeneering; Mixed Reality
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaaderis2018_104
id	ecaaderis2018_104
authors	Hollberg, Alexander, Hildebrand, Linda and Habert, Guillaume
year	2018
title	Environmental design - Lessons learned from teaching LCA
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 65-74
keywords	Architects largely define the environmental impact a building will cause throughout its life cycle. Especially decisions taken in early design stages have a great influence on the environmental performance. The integration of environmental assessment into the design process requires adequate tools and basic knowledge of the architects using them. This paper discusses both aspects by means of two case studies with students. In both case studies, the goal was to use Life Cycle Assessment (LCA) to optimize the environmental performance of the building in the design process. The results of the first case study proved the benefits of using LCA-based information for decision-making, but some issues of using the tool during the design process became evident. In the second case study an improved LCA-tool was employed that proved to be applicable by all students. Nevertheless, only one group used the feedback to optimize the building design in an iterative process as intended by the supervisors. This leads to the conclusion that the difficulty of environmental design shifted from a lack of adequate assessment tools to the question of the design approach.
series	eCAADe
email
last changed	2018/05/29 14:33

For more results click below: