Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 628

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2020_121
id	ecaade2020_121
authors	Trossman Haifler, Yaala and Fisher-Gewirtzman, Dafna
year	2020
title	Urban Well-Being in Dense Cities - The influence of densification strategies, experiment in virtual reality
doi	https://doi.org/10.52842/conf.ecaade.2020.1.323
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 323-332
summary	Urban morphology significantly impacts resident's well-being. This study examines the impact of urban environments on the sense of well-being, using virtual reality as a research environment. Most of the world's population already live in urban localities; and it is expected that in two decades, more than 70% of the total population of the planet will be city dwellers(UN 2018). This study examines the impact of various urban configurations on dwellers well-being. Participants were presented with simulated pedestrian movement through 24 virtual urban environments. The environments differed by density level, spatial configurations, vegetation, and commerce. Participants assessed each alternative through structured questionnaires. It has been found that the density and presence of vegetation and commerce in the urban area have a significant impact on the subject's well-being in urban environments. extreme levels of densification have a negative effect on subjects' feelings, but vegetation and commerce, especially at the high levels of density, can improve them. In this research we established the framework for planning principles that can improve urban densification processes. An understanding of the wellbeing of urban dwellers, and the parameters that can influence this, will help urban designers and planners in creating better urbanized future environments.
series	eCAADe
email
last changed	2022/06/07 07:57

_id	sigradi2018_1417
id	sigradi2018_1417
authors	Bambozzi, Lucas
year	2018
title	The Invisible Around: Art And Informational Space [The Unstable Place]
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1128-1133
summary	The paper discusses variants of informational spaces, permeated by connectivity and communication flow. The approach considers the 'place' as a field of semantic migrations, it seeks to investigate an architectural space that tends to include invisible aspects in its constitution, affected by a set of recent communication technologies. It comments on creative processes and artistic experiments investigating ways to "see" or visualize electromagnetic fields, radio waves, wi-fi and cellular signals generated by media in circulation spaces, in convergences of crossing signs and systems.
keywords	Informational space; Electromagnetic fields; Obsolescence; Mobility; Context specificity
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia18_98
id	acadia18_98
authors	Fox, Michael; Schulitz, Marc; Gershfeld, Mikhail; Cohen, Marc
year	2018
title	Full Integration: Closing the Gap on Technology Readiness
doi	https://doi.org/10.52842/conf.acadia.2018.098
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 98-107
summary	This paper discusses the authors’ experiences and lessons learned through designing and constructing small- and large-scale robotic prototypes and the fully integrated use of VR and AR for design. Also of focus here are the methodological tools utilized to implement this student-led research in an interdisciplinary educational environment, as well as the design explorations of Mars habitation systems. Through the systems engineering approach, students will generate ideas that may or may not make it to the final design development stage, but may potentially be valuable to future real exploration habitats and mission architectures. The final prototype allows an assessment of the focus parameters, which are the vessels’ transformation capacities and layout adaption. The design objective of this project is to examine strategies for commonality between an interplanetary vehicle (IPV) and a Mars surface habitat. The presented design proposals address this challenge to create a common habitation system in both habitats so that crew members will be familiar with the layout, function, and location throughout the expedition. The design tools operate at the intersection of architectural layout design, mechanics, and structural design, and use origami folding techniques and structural form-finding concepts to generate shell action rigidity. In addition, the project develops a strategy for mobility and transformation of the surface habitat prior to its transformed configuration. The value here lies in understanding lessons from this strategy for both the design process as well as efficiency and optimization in design as a model for terrestrial design.
keywords	full paper, bim, flexible structures, performance + simulation, representation + perception, building technologies, vr/ar/mr
series	ACADIA
type	paper
email
last changed	2022/06/07 07:50

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
doi	https://doi.org/10.52842/conf.acadia.2018.216
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2018_219
id	ecaade2018_219
authors	Bai, Nan, Ye, Wenqia, Li, Jianan, Ding, Huichao, Pienaru, Meram-Irina and Bunschoten, Raoul
year	2018
title	Customised Collaborative Urban Design - A Collective User-based Urban Information System through Gaming
doi	https://doi.org/10.52842/conf.ecaade.2018.1.419
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 419-428
summary	As we step into a new data-based information age, it is important to get citizens involved in the whole design process. Our research tries to build up a user-based urban information system by collecting the data of neighborhood land use preference from all the residents through gaming. The result of each individual decision will be displayed in real time using Augmented Reality technology, while the collective decision dataset will be stored, analyzed and learnt by computer, forming an optimal layout that meets the highest demand of the community. A pre-experiment has been conducted in a. an abstract virtual site and b. an existing site by collecting opinions from 122 participants, which shows that the system works well as a new method for collaborative design. This system has the potential to be applied both in realistic planning processes, as a negotiation toolkit, and in virtual urban forming, in the case of computer games or space colonization.
keywords	Collaborative Design; Customization; Urban Design; Gaming; Information System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2018_1348
id	sigradi2018_1348
authors	Bertuzzi, Juan Pablo; Chiarella, Mauro
year	2018
title	Gamification of Educational Environments through Virtual Reality Platforms
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 975-979
summary	This paper proposes the experimentation of new information and communication technologies through the development of an experimental and interactive virtual reality application, where educational content and game mechanics are incorporated, in order to generate interactivity within a digital 3D space and promote academic exchange in an innovative way. This project aims to the exploration of an open 3D digital environment, where the modeling is inspired by some sector of the physical space of the authors’ university, compatible for the incorporation of smart objects, avatars and a dialogue/activities system that deals with several educational topics.
keywords	Avatar; Gamification; Hybrid worlds; Techno-politics; Virtual reality
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaadesigradi2019_425
id	ecaadesigradi2019_425
authors	Betti, Giovanni, Aziz, Saqib and Ron, Gili
year	2019
title	Pop Up Factory : Collaborative Design in Mixed Rality - Interactive live installation for the makeCity festival, 2018 Berlin
doi	https://doi.org/10.52842/conf.ecaade.2019.3.115
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 115-124
summary	This paper examines a novel, integrated and collaborative approach to design and fabrication, enabled through Mixed Reality. In a bespoke fabrication process, the design is controlled and altered by users in holographic space, through a custom, multi-modal interface. Users input is live-streamed and channeled to 3D modelling environment,on-demand robotic fabrication and AR-guided assembly. The Holographic Interface is aimed at promoting man-machine collaboration. A bespoke pipeline translates hand gestures and audio into CAD and numeric fabrication. This enables non-professional participants engage with a plethora of novel technology. The feasibility of Mixed Reality for architectural workflow was tested through an interactive installation for the makeCity Berlin 2018 festival. Participants experienced with on-demand design, fabrication an AR-guided assembly. This article will discuss the technical measures taken as well as the potential in using Holographic Interfaces for collaborative design and on-site fabrication.Please write your abstract here by clicking this paragraph.
keywords	Holographic Interface; Augmented Reality; Multimodal Interface; Collaborative Design; Robotic Fabrication; On-Site Fabrication
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	sigradi2018_1629
id	sigradi2018_1629
authors	Braida, Frederico; Chagas, Icaro; Ruback Cascardo de Almeida, Isabela; Mendes de Castro, Janaina
year	2018
title	The Maker Culture and the Open Source Model in the Architecture, Urbanism and Design Context: The Fabrication and Sharing of a Game for Design Teaching
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1298-1304
summary	This article aims to present a discussion about the maker culture and an experience of fabricating and sharing a set of building blocks designed as a didactic tool for teaching architectural design within the premises of do-it-yourself culture and an open source model. Methodologically, the article is the result of both a bibliographical research and an empirical research, from which, in contemporary times, is evidenced the strengthening of flexible, collaborative, creative and innovative processes, prevailing premises in the maker movement.
keywords	Maker culture; Open source; Teaching; Democratization; Digital culture
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaadesigradi2019_398
id	ecaadesigradi2019_398
authors	Fink, Theresa and Koenig, Reinhard
year	2019
title	Integrated Parametric Urban Design in Grasshopper / Rhinoceros 3D - Demonstrated on a Master Plan in Vienna
doi	https://doi.org/10.52842/conf.ecaade.2019.3.313
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 313-322
summary	By 2050 an estimated 70 percent of the world's population will live in megacities with more than 10 million citizens (Renner 2018). This growth calls for new target-oriented, interdisciplinary methods in urban planning and design in cities to meet sustainable development targets. In response, this paper exemplifies an integrated urban design process on a master plan project in Vienna. The objective is to investigate the potential towards a holistic, digital, urban design process aimed at the development of a practical methodology for future designs. The presented urban design process includes analyses and simulation tools within Rhinoceros 3D and its plug-in Grasshopper as quality-enhancing mediums that facilitate the creative approaches in the course of the project. The increase in efficiency and variety of design variants shows a promising future for the practical suitability of this approach.
keywords	urban design; parametric modeling; urban simulation; design evaluation; environmental performance
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:50

_id	ascaad2021_065
id	ascaad2021_065
authors	Fraschini, Matteo; Julian Raxworthy
year	2021
title	Territories Made by Measure: The Parametric as a Way of Teaching Urban Design Theory
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 494-506
summary	Design tools like Grasshopper are often used to either generate novel forms, to automate certain design processes or to incorporate scientific factors. However, any Grasshopper definition has certain assumptions about design and space built into it from its earliest genesis, when the initial algorithm is set out. Correspondingly, implicit theoretical positions are built into definitions, and therefore its results. Approaching parametric design as a question of architectural, landscape architectural or urban design theory allows the breaking down of traditional boundaries between the technical and the historical or theoretical, and the way parametric design, and urban design history & theory, can be conveyed in the teaching environment. Once the boundaries between software and history & theory are transgressed, Grasshopper can be a way of testing the principles embedded in historical designs and thus these two disciplines can be joined. In urban design, there is an inherent clash between an ideal model and existing urban geography or morphology, and also between formal (qualitative) and numerical (quantitative) aspects. If a model provides a necessary vision for future development, an existing topography then results from the continuous human and natural modifications of a territory. To explore this hypothesis, the “Urban Design Representation” subject in the Master of Urban Design program at the University of Cape Town taught in 2017 & 2018 was approached “parametrically” from these two opposite, albeit convergent, starting points: the conceptual/rational versus the physical/empiric representations of a territory. In this framework, Grasshopper was used to represent typical standards and parameters of modern urban planning (for example, Floor/Area Ratio, height and distance between buildings, site coverage, etc), and a typological approach was adopted to study and “decode” the relationship between public and private space, between the street, the block and topography, between solids and voids. This methodology permits a cross-comparison of different urban design models and the immediate evaluation of their formal outputs derived from parametric data.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	ecaade2018_314
id	ecaade2018_314
authors	Gheorghe, Andrei, Hornung, Philipp, Reiss, Sigurd and Vierlinger, Robert
year	2018
title	Architecture Challenge 16 - Robotic Contouring - Researching Robotic Bending of Straight Profile Plastic Beams for Full Scale Production
doi	https://doi.org/10.52842/conf.ecaade.2018.1.165
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 165-172
summary	This paper provides insight into a new robotic plastic forming process through the prototypical construction of a full scale structure. The process explored the potential development of an automated setup, which utilizes robotic movement to create three-dimensional components from straight profile plastic beams. Polyethylene beams with a rectangular profile were bent with the help of an infrared heating ring and a 6 axis robotic arm. The digital process with custom-created Rhino/Grasshopper components allows the creation of forms with a high degree of customization in relation to the needed construction time, therefore providing for a highly flexible and quickly developable structural formwork without the need of a mold.
keywords	plastic beams forming; 6 axis robotic fabrication; profile contouring; computational optimization; structural formwork; light weight structures
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2018_1358
id	sigradi2018_1358
authors	Heesterman, Mikayla; Sweet, Kevin
year	2018
title	Robotic Connections: Customisable Joints for Timber Construction
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 644-652
summary	Timber is one of the most sustainable, renewable products, and coupled with computational tools has the potential to be redefined as a digital-age material. The research outlined in this paper employs contemporary digital fabrication techniques utilising a robotic arm to develop complex, CNC based parametric connections for engineered timber. While CNC joinery that utilizes three - five axis machining capabilities is increasingly common, the introduction of the six-axis robot as a machining tool provides greater freedom of movement and a wider range of complex procedures. This research returns to traditional Japanese timber craft, which offers unique structural and sustainable advantages. Using computational tools, new complex parametric connections suitable for contemporary fabrication will be designed and contribute to a library of joints suitable mass-customised in non-standard timber architecture.
keywords	Robotics; Fabrication; Parametric; Timber; Architecture
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2018_025
id	caadria2018_025
authors	Khoo, Chin Koi, Wang, Rui, Globa, Anastasia and Moloney, Jules
year	2018
title	Prototyping a Human-Building Interface with Multiple Mobile Robots
doi	https://doi.org/10.52842/conf.caadria.2018.1.525
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 525-534
summary	Recent advances in miniature mobile robotic research have generated possibilities and potentials in a range of fields such as the military, rescue operations, logistics and education. Within architecture, especially in responsive architecture and architectural interface disciplines, there has been minimal uptake of this technology, and so its full potential and implications have not been fully explored. In this paper, we propose a design exploration of a human-building interface (HBI) with multiple mobile robots serving as 'physical pixels', which investigates the latent possibilities of public interactive displays and media screens, potentially provoking interaction with existing built environments. The outcomes of this paper include an early-stage design study of an HBI prototype, PixelFace, which has been developed with multiple spherical mobile robots and an existing building structure. An early physical implementation of the HBI as an interactive public display with real-time physical movement that encourages playful interaction is also included.
keywords	Human-Computer Interaction; Human-Building Interface; Mobile Robots; Responsive Architecture
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2018_174
id	caadria2018_174
authors	Lagemann, Dennis
year	2018
title	The Syntopy - An Information-Based Model of Space
doi	https://doi.org/10.52842/conf.caadria.2018.2.443
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 443-452
summary	The paper argues that Modernism has produced a manifoldness of theories about spaces or spatial configurations which resemble valuable facets. Yet, they all shed a light on single aspects of spatiality. This raises the question if not in the age of information, there could be a common ground for theories of space that might serve as a model to purport a more general view. Speaking with French philosopher Michel Serres, when the old model of time collapsed at the end of Modernity, it has left the underlying concepts as scattered elements to the beginning of Modernism. The most promising approach to reconcile these elements in spatiotemporality appears to be Category Theory in mathematics. It defines four categorically differentiated domains which exactly resemble the scattered elements. In search for a common ground to build up a new model, the Syntopy is being developed for thinking space, based on the way information is encoded within these four domains.
keywords	Space; Information and Data; Lambda Calculus; Topography and Topology; Synthesis
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2018_293
id	caadria2018_293
authors	Lee, Jisun and Lee, Hyunsoo
year	2018
title	The Visible and Invisible Network of a Self-Organizing Town - Agent-Based Simulation for Investigating Urban Development Process
doi	https://doi.org/10.52842/conf.caadria.2018.2.411
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 411-420
summary	This study applies self-organization as a methodology to understand the complex process of city networks caused by interactions between spatial structures and individual behaviors. The agent-based simulations have been conducted to investigate the visible and invisible networks understanding the self-organized aspects of city development processes. To develop optimal future networks providing connectivity and accessibility this study investigates spatial network configurations from internal individual behavior and movement. As results, it was found that the spatial configurations of the agent movement trails match to the current district boundaries and the similar network patterns were seen in various control values of agent behavior settings. This study contributes to searching out the hierarchy of network structures which is an important factor for re-planning of the way system.
keywords	Agent-based simulation; network analysis ; self organization ; urban development process ; Physarum polycephalum
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2018_190
id	caadria2018_190
authors	Lee, Ju Hyun, Gu, Ning, Taylor, Mark and Ostwald, Michael
year	2018
title	Rethinking and Designing the Key Behaviours of Architectural Responsiveness in the Digital Age
doi	https://doi.org/10.52842/conf.caadria.2018.1.359
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 359-368
summary	In the late 1960s the architect Nicholas Negroponte introduced that the physical environment could exhibit reflexive and simulated behaviours, an idea that has since been widely explored. Despite of this wider interest, there is not, however, a systematic approach to understanding architectural responsiveness in the digital age. This paper aims to provide a formal way to facilitate designing smart and interactive artificiality in the built environment. This paper presents a conceptual framework, through exploratory studies on recent architecture, highlighting four key behaviours: (1) tangible interaction, (2) embodied response, (3) ambient simulation, and (4) mixed reality. In addition, two essential enablers, collectiveness and immersion, are proposed to enhance these key behaviours. This framework can be used as a tool to systematically identify and characterise the responsiveness of "responsive architecture". The creative mixtures of the key behaviours will contribute to the development of unique responsive environments.
keywords	Responsive architecture; Responsive behaviour; Interactive art; Negroponte
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia18_266
id	acadia18_266
authors	Molloy, Isabella; Miller, Tim
year	2018
title	Digital Dexterity. Freeform 3D printing through direct toolpath manipulation for crafted artifacts
doi	https://doi.org/10.52842/conf.acadia.2018.266
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 266-275
summary	The research presented here investigates an approach to FDM Freeform 3D printing that fully utilizes simultaneous x, y, z axis movement for the production of designed artefacts. Most Freeform printing techniques create bands of space frame type structures, often defined by structural pursuits. Here, a Form Responsive Method is used, which exploits the design opportunities of synchronized three-dimensional movement depositing extrudate in patterns of lines and curves that embrace functional, aesthetic and tectonic qualities, all influenced by an industrial design perspective. The system allows the designer complete control of the pattern and deposition of the material in relation to the printed artefact. The form and details are designed concurrently by direct manipulation of the toolpath whilst considering material deposition and structural integrity. This method of working requires intimate understanding and control of both software and hardware to craft the artefact to the desired design. Different aspects of the technique and challenges are described and discussed through a range of artefacts of different scales from utensils to furniture items.
keywords	full paper, freeform 3d printing, industrial design, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	sigradi2018_1477
id	sigradi2018_1477
authors	Mulder, Hugo
year	2018
title	Prototyping: A Politics of Memory
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 80-85
summary	This paper presents a view on the architectural prototype as an exteriorisation of human memory. Bernard Stiegler describes the politics of memory involved in the process of hypomnesis, in which memory is stored in technology. Stiegler’s ideas with relation to the prototype were developed while working on a research prototype. Four modes of exteriorisation have been extracted from that process: the use of memory aids, the prototype as stepping stone for thought, the digitisation of fabrication, and the prototype used for communication. This analysis provides a pathway for making expert knowledge available and accessible as a common good.
keywords	Prototype; Exteriorisation; Memory; Hypomnesic milieu
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ecaadesigradi2019_478
id	ecaadesigradi2019_478
authors	Nardelli, Eduardo Sampaio
year	2019
title	BIM training in Brazil - Preparing professionals for BIM adoption by public administration
doi	https://doi.org/10.52842/conf.ecaade.2019.2.305
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 305-314
summary	On May 2018 the Brazilian federal government published the Decree 9.377 setting a National Strategy for Information and Dissemination of Building Information Modelling - BIM to enable its adoption by public administration. This strategy has nine targets and among them the task of training professionals in BIM to support the demand that should be generated. A period between 2018 and 2021 has been planned to establish learning objectives and develop model disciplines, a process that, however, should not start from scratch because there are already some BIM training initiatives being performed in the country since the early 2000s. This paper has done an overview on this production highlighting some relevant conceptual contributions to this debate aiming to address challenges and possible ways to support the expected Architectural and Engineering courses restructuring.
keywords	BIM, Education, Architecture, Engineering and Construction
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	sigradi2018_1784
id	sigradi2018_1784
authors	Pimentel, Diego; Cataldi, Mariano; Muñiz, Gonzalo; Barbitta, Néstor
year	2018
title	Drones, an air panopticon?
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1328-1332
summary	Drones are not just a new technology or a fun toy airplane with remote control, they are also a possible new and silent control mechanism. It would not be the first time in history nor the last in which a technological advance is used to monitor society and impress upon it the power of the State. The particularity of this case is that not only could it be misused by the government, but also some members of society could come together in an anarchic movement that, for example, could invade people's privacy, as the fact of knowing the lack of control over this type of practices.
keywords	Drones
series	SIGRADI
email
last changed	2021/03/28 19:59

For more results click below: