Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 619

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2018_323
id	ecaade2018_323
authors	Newton, David
year	2018
title	Multi-Objective Qualitative Optimization (MOQO) in Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2018.1.187
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 187-196
summary	Architectural design problems are often multi-objective in nature, involving both qualitative and quantitative objectives. Previous research has focused exclusively on the development of multi-objective optimization algorithms that work with multiple quantitative objectives. No previous research has looked at the topic of multi-objective qualitative optimization (MOQO), in which multiple qualitative objectives are optimized simultaneously. This research addresses MOQO through the development of a unique multi-objective optimization algorithm for the conceptual design phase that uses three-dimensional convolutional neural networks (3D CNNs) to measure user-defined qualities in architectural massing models.
keywords	multi-objective optimization; generative design; multi-objective qualitative optimization; algorithmic design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2018_181
id	caadria2018_181
authors	Chun, Junho, Lee, Juhun and Park, Daekwon
year	2018
title	TOPO-JOINT - Topology Optimization Framework for 3D-Printed Building Joints
doi	https://doi.org/10.52842/conf.caadria.2018.1.205
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 205-214
summary	Joints and connectors are often the most complex element in building assemblies and systems. To ensure the performance of the assemblies and systems, it is critical to optimize the geometry and configurations of the joints based on key functional requirements (e.g., stiffness and thermal exchange). The proposed research focuses on developing a multi-objective topology optimization framework that can be utilized to design highly customized joints and connections for building applications. The optimized joints that often resemble tree structures or bones are fabricated using additive manufacturing techniques. This framework is built upon the integration of high-fidelity topology optimization algorithms, additive manufacturing, computer simulations and parametric design. Case studies and numerical applications are presented to demonstrate the validity and effectiveness of the proposed optimization and additive manufacturing framework. Optimal joint designs from a variety of architectural and structural design considerations, such as stiffness, thermal exchange, and vibration are discussed to provide an insightful interpretation of these interrelationships and their impact on joint performance.
keywords	Topology optimization; parametric design; 3d printing
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2018_228
id	caadria2018_228
authors	Newton, David
year	2018
title	Accommodating Change and Open-Ended Search in Design Optimization
doi	https://doi.org/10.52842/conf.caadria.2018.2.175
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 175-184
summary	Many real-world architectural multi-objective problems (MOPs) are dynamic and may have objectives, decision variables, and constraints that change during the optimization process. These problems are known as dynamic MOPs (DMOPs). Dynamic multi-objective evolutionary algorithms (DMOEAs) have emerged in the fields of optimization, operations research, and computer science as one way to address the challenges posed by DMOPs. DMOEAs offer new capacities for exploration and interaction with the designer, but they have not yet been studied in the field of architecture. This research addresses these issues through the development of a unique interactive DMOEA-based design tool for the conceptual design phase. We propose a new modification to the popular nondominated sorting genetic algorithm II (NSGA-II), that we call the dynamic progressive for architecture NSGA-II (DPA-NSGA-II). We show that DPA-NSGA-II outperforms NSGA-II in finding novel solutions.
keywords	algorithmic design; multi-objective optimization; evolutionary computation; parametric design; generative design
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	sigradi2018_1563
id	sigradi2018_1563
authors	Karaoglan Cemre, Füsun; Alaçam, Sema
year	2018
title	Design of a Post-Disaster Temporary Living Space Through the Use of Shape Evolution
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 191-198
summary	As the increasing number of disasters taking place each year result in a larger number of people in need of urgent sheltering, temporary shelters become a more critical subject of architectural design. With this in mind, the aim of this study is to design a temporary post-disaster living space for the displaced people. Towards this aim, 2D layout possibilities are generated and evaluated with genetic algorithms. Different from the previous studies, the project focuses on the potential use of shape evolution and multi-objective genetic algorithms for the design of a disaster relief shelter. The results are expected to produce a holistic digital model that can respond to different post-disaster scenarios.
keywords	Computational design; Emergency architecture; Genetic algorithms; Modularity; Mass customization
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2022_278
id	caadria2022_278
authors	Ortner, F. Peter and Tay, Jing Zhi
year	2022
title	Optimizing Design Circularity: Managing Complexity in Design for Circular Economy Through Single and Multi-Objective Optimisation
doi	https://doi.org/10.52842/conf.caadria.2022.1.191
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 191-200
summary	This paper advances the application of computational optimization to design for circular economy (CE) by comparing results of scalarized single-objective optimization (SOO) and multi-objective optimization (MOO) to a furniture design case study. A framework integrating both methods is put forward based on results of the case study. Existing design frameworks for CE emphasize optimization through an iterative process of manual assessment and redesign (Ellen MacArthur Foundation, 2015). Identifying good design solutions for CE, however, is a complex and time-consuming process. Most prominent CE design frameworks list at least nine objectives, several of which may conflict (Reike et al., 2018). Computational optimization responds to these challenges by automating search for best solutions and assisting the designer to identify and manage conflicting objectives. Given the many objectives outlined in circular design frameworks, computational optimisation would appear a priori to be an appropriate method. While results presented in this paper show that scalarized SOO is ultimately more time-efficient for evaluating CE design problems, we suggest that given the presence of conflicting circular design objectives, pareto-set visualization via MOO can initially better support designers to identify preferences.
keywords	Design for Circular Economy, Computational Optimisation, Sustainability, Design Optimisation, SDG 11, SDG 12
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	ijac201816403
id	ijac201816403
authors	Pantazis, Evangelos and David Gerber
year	2018
title	A framework for generating and evaluating façade designs using a multi-agent system approach
source	International Journal of Architectural Computing vol. 16 - no. 4, 248-270
summary	Digital design paradigms in architecture have been rooted in representational models which are geometry centered and therefore fail to capture building complexity holistically. Due to a lack of computational design methodologies, existing digital design workflows do little in predicting design performance in the early design stage and in most cases analysis and design optimization are done after a design is fixed. This work proposes a new computational design methodology, intended for use in the area of conceptual design of building design. The proposed methodology is implemented into a multi-agent system design toolkit which facilitates the generation of design alternatives using stochastic algorithms and their evaluation using multiple environmental performance metrics. The method allows the user to probabilistically explore the solution space by modeling the design parameters’ architectural design components (i.e. façade panel) into modular programming blocks (agents) which interact in a bottom-up fashion. Different problem requirements (i.e. level of daylight inside a space, openings) described into agents’ behavior allow for the coupling of data from different engineering fields (environmental design, structural design) into the a priori formation of architectural geometry. In the presented design experiment, a façade panel is modeled into an agent-based fashion and the multi-agent system toolkit is used to generate and evolve alternative façade panel configurations based on environmental parameters (daylight, energy consumption). The designer can develop the façade panel geometry, design behaviors, and performance criteria to evaluate the design alternatives. The toolkit relies on modular and functionally specific programming modules (agents), which provide a platform for façade design exploration by combining existing three-dimensional modeling and analysis software.
keywords	Generative design, multi-agent systems, façade design, agent-based modeling, stochastic search
series	journal
email
last changed	2019/08/07 14:04

_id	caadria2018_054
id	caadria2018_054
authors	Shen, Xiaofei
year	2018
title	Environmental Parametric Multi-Objective Optimization for High Performance Facade Design
doi	https://doi.org/10.52842/conf.caadria.2018.2.103
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 103-112
summary	This paper demonstrates the applicability of a data-integrated and user-friendly Multi-Objective Optimization (MOO) method within the Grasshopper (GH) parametric design interface which supports early stage design decision making for High Performance Building (HPB) façade. With multiple environmental objectives optimized and multiple geometric parameters adjusted in the same intuitive design space, designers with limited knowledge on scripting could easily set up the nodes simultaneously when the design is carried out to achieve the efficiency in HPB design optimization. An experiment utilizing the method, with DIVA as the environmental simulator and Octopus as the MOO solver, is demonstrated for rational daylight distribution, balanced solar heat gain and reduced energy use intensity. The findings show both potentials and limitations of the proposed method.
keywords	Multi-Objective Optimization; Environmental Parametrics; Generative Design; High Performance Facade
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia18_98
id	acadia18_98
authors	Fox, Michael; Schulitz, Marc; Gershfeld, Mikhail; Cohen, Marc
year	2018
title	Full Integration: Closing the Gap on Technology Readiness
doi	https://doi.org/10.52842/conf.acadia.2018.098
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 98-107
summary	This paper discusses the authors’ experiences and lessons learned through designing and constructing small- and large-scale robotic prototypes and the fully integrated use of VR and AR for design. Also of focus here are the methodological tools utilized to implement this student-led research in an interdisciplinary educational environment, as well as the design explorations of Mars habitation systems. Through the systems engineering approach, students will generate ideas that may or may not make it to the final design development stage, but may potentially be valuable to future real exploration habitats and mission architectures. The final prototype allows an assessment of the focus parameters, which are the vessels’ transformation capacities and layout adaption. The design objective of this project is to examine strategies for commonality between an interplanetary vehicle (IPV) and a Mars surface habitat. The presented design proposals address this challenge to create a common habitation system in both habitats so that crew members will be familiar with the layout, function, and location throughout the expedition. The design tools operate at the intersection of architectural layout design, mechanics, and structural design, and use origami folding techniques and structural form-finding concepts to generate shell action rigidity. In addition, the project develops a strategy for mobility and transformation of the surface habitat prior to its transformed configuration. The value here lies in understanding lessons from this strategy for both the design process as well as efficiency and optimization in design as a model for terrestrial design.
keywords	full paper, bim, flexible structures, performance + simulation, representation + perception, building technologies, vr/ar/mr
series	ACADIA
type	paper
email
last changed	2022/06/07 07:50

_id	acadia18_394
id	acadia18_394
authors	Adel, Arash; Thoma, Andreas; Helmreich, Matthias; Gramazio, Fabio; Kohler, Matthias
year	2018
title	Design of Robotically Fabricated Timber Frame Structures
doi	https://doi.org/10.52842/conf.acadia.2018.394
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 394-403
summary	This paper presents methods for designing nonstandard timber frame structures, which are enabled by cooperative multi-robotic fabrication at building-scale. In comparison to the current use of automated systems in the timber industry for the fabrication of plate-like timber frame components, this research relies on the ability of robotic arms to spatially assemble timber beams into bespoke timber frame modules. This paper investigates the following topics: 1) A suitable constructive system facilitating a just-in-time robotic fabrication process. 2) A set of assembly techniques enabling cooperative multi-robotic spatial assembly of bespoke timber frame modules, which rely on a man-machine collaborative scenario. 3) A computational design process, which integrates architectural requirements, fabrication constraints, and assembly logic. 4) Implementation of the research in the design and construction of a multi-story building, which validates the developed methods and highlights the architectural implications of this approach.
keywords	full paper, fabrication & robotics, generative design, computation, timber architecture
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	sigradi2018_1628
id	sigradi2018_1628
authors	Agirbas, Asli
year	2018
title	The Use of Multi-Software in Undergraduate Architectural Design Studio Education: A Case Study
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1059-1064
summary	In the architectural design process, instead of using the computer programs effectively, the ability of choosing the most suitable program for the purpose takes place. However, different programs used in the design process serve different purposes. Therefore, the use of more than one program throughout the project design process arises. Every day the number of programs used increases rapidly. Hence, the designers find difficult to adapt this speed. The same applies to the students of architectural design studio course. Therefore, in this study with undergraduate architecture students, a pilot study focusing on the use of multi-software was conducted within the scope of architectural design studio. The process and outputs were evaluated.
keywords	Use of multi-software; Contextual design; Architectural design education; CAAD
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaadesigradi2019_425
id	ecaadesigradi2019_425
authors	Betti, Giovanni, Aziz, Saqib and Ron, Gili
year	2019
title	Pop Up Factory : Collaborative Design in Mixed Rality - Interactive live installation for the makeCity festival, 2018 Berlin
doi	https://doi.org/10.52842/conf.ecaade.2019.3.115
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 115-124
summary	This paper examines a novel, integrated and collaborative approach to design and fabrication, enabled through Mixed Reality. In a bespoke fabrication process, the design is controlled and altered by users in holographic space, through a custom, multi-modal interface. Users input is live-streamed and channeled to 3D modelling environment,on-demand robotic fabrication and AR-guided assembly. The Holographic Interface is aimed at promoting man-machine collaboration. A bespoke pipeline translates hand gestures and audio into CAD and numeric fabrication. This enables non-professional participants engage with a plethora of novel technology. The feasibility of Mixed Reality for architectural workflow was tested through an interactive installation for the makeCity Berlin 2018 festival. Participants experienced with on-demand design, fabrication an AR-guided assembly. This article will discuss the technical measures taken as well as the potential in using Holographic Interfaces for collaborative design and on-site fabrication.Please write your abstract here by clicking this paragraph.
keywords	Holographic Interface; Augmented Reality; Multimodal Interface; Collaborative Design; Robotic Fabrication; On-Site Fabrication
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	acadia18_424
id	acadia18_424
authors	Bucklin, Oliver; Drexler, Hans; Krieg, Oliver David; Menges, Achim
year	2018
title	Integrated Solid Timber. A multi-requisite system for the computational design,fabrication, and construction of versatile building envelopes
doi	https://doi.org/10.52842/conf.acadia.2018.424
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 424-433
summary	The paper presents the development of a building system made from solid timber that fulfils the requirements of modern building skins while expanding the design possibilities through innovation in computational design and digital fabrication. Multiple strategies are employed to develop a versatile construction system that generates structure, enclosure and insulation while enabling a broad design space for contemporary architectural expression. The basic construction unit augments the comparatively high insulation values of solid timber by cutting longitudinal slits into beams, generating air chambers that further inhibit thermal conductivity. These units are further enhanced through a joinery system that uses advanced parametric modeling and computerized control to augment traditional joinery techniques. Prototypes of the system are tested at a building component level with digital models and physical laboratory tests. It is further evaluated in a demonstrator building to test development and further refine design, fabrication and assembly methods. Results are integrated into proposals for new methods of implementation. The results of the research thus far demonstrate the validity of the strategy, and continuing research will improve its viability as a building system.
keywords	full paper, materials and adaptive systems, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaaderis2018_103
id	ecaaderis2018_103
authors	Davidová, Marie and Prokop, Šimon
year	2018
title	TreeHugger - The Eco-Systemic Prototypical Urban Intervention
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 75-84
keywords	The paper discusses co-design, development, production, application of TreeHugger (see Figure 1). The co-design among community and trans-disciplinary participants with different expertise required scope of media mix, switching between analogue, digital and back again. This involves different degrees of physical and digital 'GIGA-Mapping' (Sevaldson, 2011, 2015), 'Grasshopper3d' (Davidson, 2017) scripting and mix of digital and analogue fabrication to address the real life world. The critical participation of this 'Time-Based Design' (Sevaldson, 2004, 2005) process is the interaction of the prototype with eco-systemic agency of the adjacent environment - the eco-systemic performance. The TreeHugger is a responsive solid wood insect hotel, generating habitats and edible landscaping (Creasy, 2004) on bio-tope in city centre of Prague. To extend the impact, the code was uploaded for communities to download, local-specifically edit and apply worldwide. Thus, the fusion of discussed processes is multi-scaled and multi-layered, utilised in emerging design field: Systemic Approach to Architectural Performance.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	ecaaderis2018_109
id	ecaaderis2018_109
authors	Fereos, Pavlos and Tsiliakos, Marios
year	2018
title	Lucid Foam - Multi-Axis Robotic Hot-Wire Cutting for Translucency
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 123-130
keywords	Hotwire cutting of Styrofoam or Polystyrene has been a popular tool for developing fast prototypes by the architectural community. The introduction of multi-axis industrial robots in the architectural curriculum, and the enhancement of the design to fabrication process by software bridging the gap, provided an alternative meaning to the traditional mostly representational process of hotwire cutting.This paper sets out to document and assess the procedural methodology and the results of a series of integrated design to fabrication experiments that took place in the Institut für Experimentelle Architektur-Hochbau. By channelling design intention towards a component assembly for a translucent effect, students were asked to utilise industrial robots to fabricate and prototype via hotwire cutting, designs that refer to architectural elements. These elements, mainly due to their scale and the commercial availability of bulk Styrofoam panels, can lead to functional or ornamental representations of discrete elements, which can be assembled together as part of a greater design.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	ecaade2018_412
id	ecaade2018_412
authors	Flanagan, Robert
year	2018
title	BIM’s Complexity and Ambiguity - BIM v. Paper Architecture
doi	https://doi.org/10.52842/conf.ecaade.2018.1.265
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 265-270
summary	Architects rely on the graphic language of words and art to bridge intention and design, just as it has always been. Yet, passing an idea or concept from mental imagery to design practice through 2D, 3D, and 4D design filters is especially challenging in BIM technology. Severe limitations hinder or even preclude BIMs use in certain complex design tasks, as identified in the Anti-Box, "The anti-box celebrates the death of the ninety-degree angle- in fact, every angle." (de Graaf 2017). Compatibility and constraints determine the most appropriate uses of BIM software, from designing mundane shopping mall developments to complex architectural engineering feats that stagger the imagination. BIM's main benefit is in the middle when it is creatively employed by professional architects in multi-discipline collaborations, well versed in symbolic representation, of designs conceived of multivalent design factors: narrative, form, function, multi-sensory access, materiality, space, and environment.
keywords	BIM; analog; HIC; Constructivist; Chernikov; photomatch
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia18_226
id	acadia18_226
authors	Glynn, Ruairi; Abramovic, Vasilija; Overvelde, Johannes T. B.
year	2018
title	Edge of Chaos. Towards intelligent architecture through distributed control systems based on Cellular Automata.
doi	https://doi.org/10.52842/conf.acadia.2018.226
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 226-231
summary	From the “Edge of Chaos”, a mathematical space discovered by computer scientist Christopher Langton (1997), compelling behaviors originate that exhibit both degrees of organization and instability creating a continuous dance between order and chaos. This paper presents a project intended to make this complex theory tangible through an interactive installation based on metamaterial research which demonstrates emergent behavior using Cellular Automata (CA) techniques, illustrated through sound, light and motion. We present a multi-sensory narrative approach that encourages playful exploration and contemplation on perhaps the biggest questions of how life could emerge from the disorder of the universe. We argue a way of creating intelligent architecture, not through classical Artificial Intelligence (AI), but rather through Artificial Life (ALife), embracing the aesthetic emergent possibilities that can spontaneously arise from this approach. In order to make these ideas of emergent life more tangible we present this paper in four integrated parts, namely: narrative, material, hardware and computation. The Edge of Chaos installation is an explicit realization of creating emergent systems and translating them into an architectural design. Our results demonstrate the effectiveness of a custom CA for maximizing aesthetic impact while minimizing the live time of architectural kinetic elements.
keywords	work in progress, complexity, responsive architecture, distributed computing, emergence, installation, interactive architecture, cellular automata
series	ACADIA
type	paper
email
last changed	2022/06/07 07:51

_id	caadria2018_066
id	caadria2018_066
authors	Hopfenblatt, James and Balakrishnan, Bimal
year	2018
title	The "Nine-Square Grid" Revisited: 9-Cube VR - An Exploratory Virtual Reality Instruction Tool for Foundation Studios
doi	https://doi.org/10.52842/conf.caadria.2018.1.463
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 463-471
summary	While the original Nine Square Grid problem, developed by John Hejduk and other influential educators, has shown many time-tested strengths; the value of the foundation studio project relies strongly on repetition and iteration. This activity oftentimes can be tedious when executed using traditional media. To expand upon the pedagogical goals of the original Nine Square Grid problem,we developed a virtual reality tool titled 'Nine Cube VR.' This tool expands upon the pedagogical goals of the original Nine Square Grid problem. Our tool takes advantage of immersive technology and its capacity to maximize object and spatial presence to aid in teaching beginning design students. Using the Unity game engine for development, zSpace Virtual/Augmented Reality desktop monitor and the HTC Vive head-mounted display, we created a multi-platform, easy-to-use kit-of-parts to educate beginning design students in architecture and interior design foundation design concepts.
keywords	Virtual Reality; Architectural Education; Interaction
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2018_161
id	caadria2018_161
authors	Huang, Xiaoran, White, Marcus and Burry, Mark
year	2018
title	Design Globally, Immerse Locally - A Synthetic Design Approach by Integrating Agent Based Modelling with Virtual Reality
doi	https://doi.org/10.52842/conf.caadria.2018.1.473
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 473-482
summary	The last three decades have witnessed the explosion of technology and its impact on the architecture discipline which has drastically changed the methods of design. New techniques such as Agent-based modeling (ABM) and Virtual Reality (VR) have been widely implemented in architectural and urban design domains, yet the potential integration between these two methods remains arguably unexploited. The investigation in this paper aims to probe the following questions: How can architects and urban designers be informed more comprehensively by melding ABM and VR techniques at the preliminary/conceptual design stage? Which platform is considered more appropriate to facilitate a user-friendly system and reduces the steep learning curve? And what are the potential benefits of this approach in architectural education, particularly for the design studio environment? With those questions, we proposed a prototype in Unity, a multi-platform development tool that originated from the game industry, to simulate and visualize pedestrian behaviors in urban environments with immersive design experience and tested it in a scenario-based case study. This approach has also been further tested in an architectural design studio, demonstrating its technical feasibility as well as the potential contributions to the pedagogy.
keywords	Agent based modelling; Virtual Reality; Urban Design
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ecaade2018_434
id	ecaade2018_434
authors	Hünkar, Ertunç and Figueiredo, Bruno Acácio Ferreira
year	2018
title	3D Printing of High Strength and Multi-Scaled Fragmented Structures
doi	https://doi.org/10.52842/conf.ecaade.2018.1.173
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 173-178
summary	Our research aims to push the limits of 3D printing towards the structural design and optimization. Additive manufacturing has an unique feature which is printing multi-faced complex geometries as easy as simple ones. Therefore additive manufacturing creates the chance of producing really small scaled complex forms. In a structural network, it can be easily understood that the more geometric variations to respond stress, the more adaptive structure will become to respond structural needs. The structural reaction is to be fictionalized by procedural operations and analysis that will be a tool to design multi-scaled fragmented structures. Those operations is to use the structural analysis and material reactions. Their iteration with the overall geometry will form the geometric generations. However the verification of the generations as outcomes of a real 3D printer is crucial. To verify, the precision of additive manufacturing should be sensitive enough that the structural element will function as it's simulated in computer with the algorithm. The sensitivity is important because, even couple of micro-sized problems can cause bigger ones in the structural element itself. The combination of all these variables can enable an initial geometry, to be able to adapt the stuructural needs in every additive generation.
keywords	Additive Manufacturing(AM); Structural Optimization; Selective Laser Sintering(SLS); Structural Design; Shape Grammars; Design Computation
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2018_233
id	ecaade2018_233
authors	Kontiza, Iacovina, Spathi, Theodora and Bedarf, Patrick
year	2018
title	Spatial Graded Patterns - A case study for large-scale differentiated space frame structures utilising high-speed 3D-printed joints
doi	https://doi.org/10.52842/conf.ecaade.2018.2.039
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 39-46
summary	Geometric differentiation is no longer a production setback for industrial grade architectural components. This paper introduces a design and fabrication workflow for non-repetitive large-scale space frame structures composed of custom-manufactured nodes, which exploits the advantages of latest advancements in 3D-printing technology. By integrating design, fabrication and material constraints into a computational methodology, the presented approach addresses additive manufacturing of functional industry-grade parts in short time, high speed and low cost. The resulting case study of a 4.5 x 4.5 x 2.5 m lightweight kite structure comprises 1380 versatile fully-customised connectors and outlines the manifold potential of additive manufacturing for architecture much bigger than the machine built space. First, after briefly introducing space frames in architecture, this paper discusses the computational framework of generating irregular space frames and parametric joint design. Second, it examines the advantages of MJF printing in conjunction with integrating smart sequencing details for the following assembly process. Finally, a conclusive outlook is given on improvements and further developments for bespoke 3D-printed space frame structures.
keywords	3D-printing; Multi-Jet Fusion; Space Frame; Graded Subdivision
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: