Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 592

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2018_114
id	ecaade2018_114
authors	Paneras, Harris, Yip, Michael, Dobbs, Tiara, Doherty, Ben, Fabbri, Alessandra, Gardner, Nicole and Haeusler, M. Hank
year	2018
title	Augmented Reality in the Design Process - Using visual effects (VFX) motion tracking techniques to conduct quantification research on the performance of augmented reality
doi	https://doi.org/10.52842/conf.ecaade.2018.2.761
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 761-770
summary	The research explores how quantitative performance analysis of augmented reality would influence its mainstream adoption within the Built Environment Industry. The process involves the development and quantification of key augmented reality components, through the use of Visual Inertial Odometry and Visual Effects motion tracking techniques. Targeting mobile technology as a case study for the research, its potentials and limitations will be explored and discovered in relation to the industry. Accordingly, the research focuses on assessing the visuality and communicative quality of augmented reality projections from 2D, cuboid, cylindrical, 3D object, geo-location and marker less. Testing this form of technology under realistic scenarios provides a baseline for developers to rationalise their choices in their augmented reality development. This would study the effectiveness of augmented reality projections and vindicate the typical constants and variables when developing augmented reality applications, reducing the need for ongoing practical experimentations to successfully achieve augmentation.
keywords	Mobile; Augmented Reality; Performance Analysis; Fundamental Research; Quantitative Research
series	eCAADe
email
last changed	2022/06/07 08:00

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	acadia18_232
id	acadia18_232
authors	Kilian, Axel
year	2018
title	The Flexing Room Architectural Robot. An Actuated Active-Bending Robotic Structure using Human Feedback
doi	https://doi.org/10.52842/conf.acadia.2018.232
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 232-241
summary	Advances in autonomous control of object-scale robots, both anthropomorphic and vehicular, are posing new human–machine interface challenges. In architecture, very few examples of autonomous inhabitable robotic architecture exist. A number of factors likely contribute to this condition, among them the scale and cost of architectural adaptive systems, but on a more fundamental conceptual level also the questions of how architectural robots would communicate with their human inhabitants. The Flexing Room installation is a room-sized actuated active-bending skeleton structure. It uses rudimentary social feedback by counting people to inform its behavior in the form of actuated poses of the room enclosure. An operational full-scale prototype was constructed and tested. To operate it no geometric-based simulation was used; the only communication between computer and structure was in sending values for the air pressure settings and in gathering sensor feedback. The structure’s physical state was resolved through the embodied computation of its interconnected parts, and the people-counting sensor feedback influences its next action. Future work will explore the development of learning processes to improve the human–machine coexistence in space.
keywords	full paper, fabrication & robotics, non-production robotics, materials/adaptive systems, flexible structures
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	ecaaderis2018_106
id	ecaaderis2018_106
authors	Kourniatis, Nikolaos, Christidi, Nikoletta, Fakiri, Ioanna, Tsoumpri, Dimitra, Tsoukalas, Nikolaos and Karras, Evaggelos
year	2018
title	The Geometrical Structure of new Architectural Object - The role of meta-mechanics of Holography in its formation
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 29-38
keywords	In recent years there has been a gradually increasing interest in the terms on which the design and geometrical representation of the architectural object is based. ?he true challenge lies in the development of a methodology or mechanism which, having as its starting point the traditional object geometrical representation practices, will allow for a combination of new technologies towards creating new visual messages. In this research, the process of putting together a new architectural object, the digital hologram, will be seen as one such mechanism. The new views and strategies on space are open to treating spatial constructions, as a restructuring of the structures that could bring about changes for more favorable conditions for the representation of the architectural form. Thus, the strategies of architectural pioneering are judged by their ability to develop new procedures that are capable of reversing.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	caadria2018_316
id	caadria2018_316
authors	Yan, Chao, Zhang, Yunyu, Yuan, Philip F. and Yao, Jiawei
year	2018
title	Virtual Motion - Shifting Perspective as an Instrument for Geometrical Construction
doi	https://doi.org/10.52842/conf.caadria.2018.2.471
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 471-480
summary	From the invention of projection to the emergence of digital technology, there's a clear correspondences among the transformations of visual representation paradigm in art, the developments of design instrument in architecture, and the human perception of time/space. Base on the examination of this particular historical trajectory, this paper focuses the working mechanism of shifting perspective as an alternative design instrument to explore the possibility of embedding time and motion into static form in digital age. Firstly, the paper reviews how the shifting perspective was introduced to represent space in modern western painting and photography. Then based on the research on shifting perspective, the paper develops a design tool, which would be able to translate motion into the particular geometrical feature of a generated 3D object. In the end, the paper brings further discussions about the formal and spatial effects brought by this new tool, and its potential to incorporate the perceptive image of human being into design process.
keywords	Shape Study; Projective Geometry; Shifting Perspective; Motion; Time Dimension
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2018_167
id	ecaade2018_167
authors	Anton, Ana and Abdelmahgoub, Ahmed
year	2018
title	Ceramic Components - Computational Design for Bespoke Robotic 3D Printing on Curved Support
doi	https://doi.org/10.52842/conf.ecaade.2018.2.071
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 71-78
summary	Additive manufacturing enables the fabrication of affordable customisation of construction elements. This paper presents a computational design method developed for 3D printing of unique interlocking ceramic components, which assemble into segmented columns. The fabrication method is ceramic-paste extrusion, robotically placed on semi-cylindrical molds. Material system and fabrication setup contribute to the development of an integrated generative system which includes overall design, assembly logic and printing tool-path. By contextualizing clay extrusion and identifying challenges in bespoke tool-path generation, this paper discusses detailing opportunities in digital fabrication. Finally, it identifies future directions of research in extrusion-based printing.
keywords	CAAD education; generative design; robotic 3D printing; clay extrusion; curved support
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia18_312
id	acadia18_312
authors	Ariza, Inés; Mirjan, Ammar; Gandia, Augusto; Casas, Gonzalo; Cros, Samuel; Gramazio, Fabio; Kohler, Matthias.
year	2018
title	In Place Detailing. Combining 3D printing and robotic assembly
doi	https://doi.org/10.52842/conf.acadia.2018.312
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 312-321
summary	This research presents a novel construction method that links robotic assembly and in place 3D printing. Rather than producing custom joints in a separate prefabrication process, our approach enables creating highly customized connection details that are 3D printed directly onto off-the-shelf building members during their assembly process. Challenging the current fashion of highly predetermined joints in digital construction, detailing in place offers an adaptive fabrication method, enabling the expressive tailoring of connection details addressing its specific architectural conditions. In the present research, the in place detailing strategy is explored through robotic wire arc additive manufacturing (WAAM), a metal 3D printing technique based on MIG welding. The robotic WAAM process coupled with localization and path-planning strategies allows a local control of the detail geometry enabling the fabrication of customized welded connections that can compensate material and construction tolerances. The paper outlines the potential of 3D printing in place details, describes methods and techniques to realize them and shows experimental results that validate the approach.
keywords	work in progress, fabrication & robotics, robotic production, materials/adaptive systems, architectural detailing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2018_344
id	ecaade2018_344
authors	El-Gewely, Noor, Wong, Christopher, Tayefi, Lili, Markopoulou, Areti, Chronis, Angelos and Dubor, Alexandre
year	2018
title	Programming Material Intelligence Using Food Waste Deposition to Trigger Automatic Three-Dimensional Formation Response in Bioplastics
doi	https://doi.org/10.52842/conf.ecaade.2018.2.271
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 271-278
summary	Bioplastics are by their very nature parametric materials, programmable through the selection of constituent components and the ratios in which they appear, and as such present significant potential as architectural building materials for reasons beyond sustainability and biodegradability. This paper presents a system through which rigid three-dimensional doubly curved hyperbolic paraboloid shapes are automatically formed from two-dimensional sheet casts by harnessing the inherent flexibility and expressiveness of bioplastics. The system uses a gelatin-based bioplastic supplemented with granular organic matter from food waste in conjunction with a split-frame casting system that enables the self-formation of three-dimensional geometries by directing the force of the bioplastic's uniform contraction as it dries. By adjusting the food waste added to the bioplastic, its properties can be tuned according to formal and performative needs; here, dehydrated granulated orange peel and dehydrated spent espresso-ground coffee are used both to impart their inherent characteristics and also to influence the degree of curvature of the resulting bioplastic surfaces. Multi-material casts incorporating both orange peel bioplastic and coffee grounds bioplastic are shown to exert a greater influence over the degree of curvature than either bioplastic alone, and skeletonized panels are shown to exhibit the same behavior as their solid counterparts. Potential developments of the technology so as to gain greater control of the curvature performance, particularly in the direction of computer-controlled additive manufacturing, are considered, as is the potential of application in architectural scale.
keywords	Bioplastics; Composites; Fabrication; Materials
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2018_104
id	ecaade2018_104
authors	Gürsoy, Benay
year	2018
title	From Control to Uncertainty in 3D Printing with Clay
doi	https://doi.org/10.52842/conf.ecaade.2018.2.021
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 21-30
summary	The use of digital fabrication tools can extend beyond the seamless materialization of the digital model and can continuously inform design ideation through emerging material qualities. Exploring the implications of an approach to digital fabrication that is not based on imposed and rigorous formalisms but on unique and contextual ones constitutes the research agenda. Within this framework, the focus of this paper is on 3D printing with clay. Considering matter not as the static and passive outcome of digitally predetermined form, but as a design generator, a case study on both the materials and tools employed in 3D printing with clay is presented.
keywords	Digital fabrication; additive manufacturing; 3D printing with clay; material computing; uncertainty
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia18_434
id	acadia18_434
authors	Meibodi, Mania Aghaei ; Jipa, Andrei; Giesecke, Rena; Shammas, Demetris; Bernhard, Mathias; Leschok, Matthias; Graser, Konrad; Dillenburger, Benjamin
year	2018
title	Smart Slab. Computational design and digital fabrication of a lightweight concrete slab
doi	https://doi.org/10.52842/conf.acadia.2018.434
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 434-443
summary	This paper presents a computational design approach and novel digital fabrication method for an optimized lightweight concrete slab using a 3D-printed formwork. Smart Slab is the first concrete slab fabricated with a 3D-printed formwork. It is a lightweight concrete slab, displaying three-dimensional geometric differentiation on multiple scales. The optimization of slab systems can have a large impact on buildings: more compact slabs allow for more usable space within the same building volume, refined structural concepts allow for material reduction, and integrated prefabrication can reduce complexity on the construction site. Among the main challenges is that optimized slab geometries are difficult to fabricate in a conventional way because non-standard formworks are very costly. Novel digital fabrication methods such as additive manufacturing of concrete can provide a solution, but until now the material properties and the surface quality only allow for limited applications. The fabrication approach presented here therefore combines the geometric freedom of 3D binderjet printing of formworks with the structural performance of fiber reinforced concrete. Using 3D printing to fabricate sand formwork for concrete, enables the prefabrication of custom concrete slab elements with complex geometric features with great precision. In addition, space for building systems such as sprinklers and Lighting could be integrated in a compact way. The design of the slab is based on a holistic computational model which allows fast design optimization and adaptation, the integration of the planning of the building systems, and the coordination of the multiple fabrication processes involved with an export of all fabrication data. This paper describes the context, design drivers, and digital design process behind the Smart Slab, and then discusses the digital fabrication system used to produce it, focusing on the 3D-printed formwork. It shows that 3D printing is already an attractive alternative for custom formwork solutions, especially when strategically combined with other CNC fabrication methods. Note that smart slab is under construction and images of finished elements can be integrated within couple of weeks.
keywords	full paper, digital fabrication, computation, generative design, hybrid practices
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	acadia18_350
id	acadia18_350
authors	Seibold, Zach; Hinz, Kevin; García del Castillo y López, Jose Luis; Martínez Alonso, Nono; Mhatre, Saurabh; Bechthold, Martin
year	2018
title	Ceramic Morphologies. Precision and control in paste-based additive manufacturing
doi	https://doi.org/10.52842/conf.acadia.2018.350
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 350-357
summary	Additive manufacturing techniques (AMT), commonly referred to as 3D printing, are emerging as a new area of study for the production of ceramic elements at the architectural scale. AMT may allow architectural designers to break from the established means of designing with ceramic elements – a process where designs are typically confined to a limited selection of building components produced by machine, die or fixture. In this paper, we report a method for the design and additive manufacture of customizable ceramic masonry elements via paste-based extrusion. A novel digital workflow allowed for precise control of part design, and generated manufacturing parameters such as toolpath geometry and machine code. 3D scans of a selection of elements provide an initial analysis of print fidelity. We discuss the current constraints of this process and identify several on-going research trajectories generated because of this research.
keywords	work in progress, fabrication & robotics, materials/adaptive systems, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:59

_id	ecaadesigradi2019_101
id	ecaadesigradi2019_101
authors	Tebaldi, Isadora, Henriques, Gonçalo Castro and Passaro, Andres Martin
year	2019
title	A Generative System for the Terrain Vague - Transcarioca Bus Expressway in Rio de Janeiro
doi	https://doi.org/10.52842/conf.ecaade.2019.1.035
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
summary	The transport infrastructures are important elements in the cities, but, as there is a lack of planning, they tear through the urban fabric and leave empty spaces. Due to government and private disinterest, these spaces become vacant, forgotten and degraded. However, these extensive Terrain Vague offer new potential for urban use. To exploit this potential, we need methodologies that can offer personalised, extensive, feasible urban solutions. For this, we propose a computational generative system, following a 4-step methodology: 1) Site analyses and Terrain Vague identification; 2) Site classification according to parameters based on a "visual grammar"; 3) Algorithm associating space properties with geometric transformation to generate solutions: namely transformative operations in public spaces, additive transformations in semi-public spaces and subtractive operations in semi-private spaces; 4) Solution evaluation and development, according to shade criteria, spatial hierarchy and volumetric density. With our own algorithms combined with genetic algorithms, we guided the evolution of 50 volumetric solutions. The exponential increase in information requires new methodologies (Schwab, 2018). Results show the potential of computational methodologies to produce extensive urban solutions. This research, developed in a final graduation project in Architecture, aims at stimulating generative methodologies in undergraduate courses.
keywords	Terrain Vague; generative systems; parametric urbanism; genetic algorithms
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	caadria2018_121
id	caadria2018_121
authors	Wit, Andrew John
year	2018
title	Cloudmagnet, A CFRP Framework for Flexible Architectures
doi	https://doi.org/10.52842/conf.caadria.2018.1.049
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 49-58
summary	To examine CFRP's viability within architectural practice, this paper explores new possibilities and methodologies for the materials integration into the design and production processes. Through the lens of the /One Day House/ initiative and its recent subproject /cloudMAGNET/, this paper explores and evaluates new typologies of formwork and winding techniques for CFRP based structures derived from tensile modeling and CFD analysis. Through examinations in cored and sacrificial coreless winding, this paper outlines new formal, structural, adaptive and production possibilities afforded by the integration of CFRP into the architectural workflow.
keywords	additive manufacturing; composites; carbon fiber; form finding; analog / digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	cdrf2021_286
id	cdrf2021_286
authors	Yimeng Wei, Areti Markopoulou, Yuanshuang Zhu,Eduardo Chamorro Martin, and Nikol Kirova
year	2021
title	Additive Manufacture of Cellulose Based Bio-Material on Architectural Scale
doi	https://doi.org/https://doi.org/10.1007/978-981-16-5983-6_27
source	Proceedings of the 2021 DigitalFUTURES The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021)
summary	There are severe environmental and ecological issues once we evaluate the architecture industry with LCA (Life Cycle Assessment), such as emission of CO2 caused by necessary high temperature for producing cement and significant amounts of Construction Demolition Waste (CDW) in deteriorated and obsolete buildings. One of the ways to solve these problems is Bio-Material. CELLULOSE and CHITON is the 1st and 2nd abundant substance in nature (Duro-Royo, J.: Aguahoja_ProgrammableWater-based Biocomposites for Digital Design and Fabrication across Scales. MIT, pp. 1–3 (2019)), which means significantly potential for architectural dimension production. Meanwhile, renewability and biodegradability make it more conducive to the current problem of construction pollution. The purpose of this study is to explore Cellulose Based Biomaterial and bring it into architectural scale additive manufacture that engages with performance in the material development, with respect to time of solidification and control of shrinkage, as well as offering mechanical strength. At present, the experiments have proved the possibility of developing a cellulose-chitosan- based composite into 3D-Printing Construction Material (Sanandiya, N.D., Vijay, Y., Dimopoulou, M., Dritsas, S., Fernandez, J.G.: Large-scale additive manufacturing with bioinspired cellulosic materials. Sci. Rep. 8(1), 1–5 (2018)). Moreover, The research shows that the characteristics (Such as waterproof, bending, compression, tensile, transparency) of the composite can be enhanced by different additives (such as xanthan gum, paper fiber, flour), which means it can be customized into various architectural components based on Performance Directional Optimization. This solution has a positive effect on environmental impact reduction and is of great significance in putting the architectural construction industry into a more environment-friendly and smart state.
series	cdrf
email
last changed	2022/09/29 07:53

_id	caadria2019_664
id	caadria2019_664
authors	Zhou, Yifan, Zhang, Liming, Wang, Xiang, Chen, Zhewen and Yuan, Philip F.
year	2019
title	Exploration of Computational Design and Robotic Fabrication with Wire-Arc Additive Manufacturing Techniques
doi	https://doi.org/10.52842/conf.caadria.2019.1.143
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 143-152
summary	This paper discussed the exploration of computational design and robotic fabrication with Wire-Arc Additive Manufacturing techniques in a robotic metal printing workshop in Digital Futures 2018. Based on the previous research on structural-performance based design and robotic fabrication, this year's workshop mainly focused on the Wire-Arc Additive Manufacturing techniques and its possible outcomes. A prototype chair was tested for preparation. And the final target of the workshop was to build a bridge about 11m across the river. Through this metal printed bridge project, several computational optimization methods were applied to fulfill the final design. And Wire-Arc Additive Manufacturing techniques with robotic fabrication were carried out during the fabrication process.
keywords	computational design; robotic fabrication; wire-arc additive manufacturing techniques
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2018_309
id	ecaade2018_309
authors	Aºut, Serdar, Eigenraam, Peter and Christidi, Nikoletta
year	2018
title	Re-flex: Responsive Flexible Mold for Computer Aided Intuitive Design and Materialization
doi	https://doi.org/10.52842/conf.ecaade.2018.1.717
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 717-726
summary	The paper presents an ongoing research about the design and a possible use of a responsive flexible mold. The mold is developed by integrating its precedents with automation and Human-Computer Interaction (HCI). The objective of the design is to provide an immersive design tool which has direct link to fabrication. It allows intuitive interaction to its user in order to help with the design and production of complex forms by supporting the designer's implicit skills with computer. The paper presents the design by illustrating the use of the hardware such as the actuators, the sensor and the projector; and by defining the workflow within the software. The paper concludes with the description of a possible use case in which the system is used to design and materialize an object in different scales.
keywords	Design tools development; Digital fabrication and robotics; Human-computer interaction in design; Shape, form and geometry; Inventive Making
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2018_106
id	ecaade2018_106
authors	Klemmt, Christoph
year	2018
title	Subdivisional Growth Logics
doi	https://doi.org/10.52842/conf.ecaade.2018.2.079
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 79-84
summary	This research explores the combination of two different types of algorithms that have so far been treated separately in architectural computational design: recursive subdivision, and differential or cellular growth. The two algorithms appear to act in opposite directions, the first is a refinement going inwards while the latter is growing outwards. However, both algorithms are based on the refinement of mesh geometries by inserting new vertices and faces and can be used in combination. The resulting subdivisional growth can be used to enhance specific geometric traits of either recursive subdivision or cellular growth at different scales or in different sections of the design object. The resulting geometries have been explored through case studies that utilize those possibilities.
keywords	architecture; computational design; differential; growth; recursive; subdivision
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2018_1327
id	sigradi2018_1327
authors	Lobosco, Tales
year	2018
title	Virtual Reality as a tool to regain tactual procedures in digital design
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 37-43
summary	This article aims to analyze the transformations undergone in design since the implementation of the digital processes. Seeking to discuss the limits for the construction of an operational model that does not act directly on the generated form and where the gesture and the materiality lost their place. In this sense, this paper proposes a project experience based on the interaction between analogue and virtual reality tools, allowing the retrieval of tactile and material interactions, with the direct manipulation of the final shape of the object in a digital design environment.
keywords	Digital design; Tactual; Materiality; Virtual reality; Gesture
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_397
id	ecaade2018_397
authors	Stellingwerff, Martijn, Gordijn, Johannetta, Ouwerkerk, Udo and Kiela, Peter
year	2018
title	Improving the Online Design Education Experience
doi	https://doi.org/10.52842/conf.ecaade.2018.1.401
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 401-408
summary	Design education usually takes place in a studio setting, in which visual and spatial artefacts are produced, shared, improved, presented and commented. This specific setting comes with qualitative properties that allow for situated learning with object-oriented focus and interaction, combined with a rich collegial context in which ideas can flourish and certain values and ethics are cherished. Using our education platform for online learning, we noticed the lack of support for typical creative and social design studio aspects, while factual classroom education was well supported. This paper describes how we attempt to translate the qualities of the studio education setting into an online environment for design education. Our approach is not to build a Virtual Design Studio (VDS) from the bottom up, but instead, to build on top of our universities' online education platform of choice. The paper commences with a short description of design education in a studio setting. Then a number of basic principles of design studio education is applied to the development of two Massive Open Online Courses (MOOCs). In the last section we discuss the different setups and compare the online aspects with on campus design studio education.
keywords	Online design education; MOOC; Creative Learning Environment
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
doi	https://doi.org/10.52842/conf.acadia.2018.216
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

For more results click below: