Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 628

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2018_010
id	caadria2018_010
authors	Han, Lu and Cardoso Llach, Daniel
year	2018
title	Ludi: A Concurrent Physical and Digital Modeling Environment
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 515-523
doi	https://doi.org/10.52842/conf.caadria.2018.1.515
summary	This paper explores the potential of a concurrent physical and digital modeling environment. We describe a prototype for a novel design modeling interface where users can take advantage of the affordances of both physical and digital modeling environments, and work back and forth between the two. Using Processing, along with the Kinect depth sensor, the system uses depth data read from a physical modeling space to produce an enhanced digital representation in real time. Users can design by moving and stacking wooden blocks in a physical space, which is represented (and enhanced) digitally as a "voxel space," which can in turn be edited digitally. The result is a proof-of-concept concurrent physical and digital modeling environment combining design affordances specific to each media: the physical space offers tactile and embodied forms of design inter-action, and the digital space offers parametric editing capabilities, along with the capacity to view the modeling space from different perspectives, and perform basic analyses on designs. Following a brief review of experimental computational and tangible interaction design interfaces, the paper discusses the system's implementation, its limitations, and future steps.
keywords	Computational Design; Processing; Concurrent Modeling Environment; Tangible Interaction
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia18_232
id	acadia18_232
authors	Kilian, Axel
year	2018
title	The Flexing Room Architectural Robot. An Actuated Active-Bending Robotic Structure using Human Feedback
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 232-241
doi	https://doi.org/10.52842/conf.acadia.2018.232
summary	Advances in autonomous control of object-scale robots, both anthropomorphic and vehicular, are posing new human–machine interface challenges. In architecture, very few examples of autonomous inhabitable robotic architecture exist. A number of factors likely contribute to this condition, among them the scale and cost of architectural adaptive systems, but on a more fundamental conceptual level also the questions of how architectural robots would communicate with their human inhabitants. The Flexing Room installation is a room-sized actuated active-bending skeleton structure. It uses rudimentary social feedback by counting people to inform its behavior in the form of actuated poses of the room enclosure. An operational full-scale prototype was constructed and tested. To operate it no geometric-based simulation was used; the only communication between computer and structure was in sending values for the air pressure settings and in gathering sensor feedback. The structure’s physical state was resolved through the embodied computation of its interconnected parts, and the people-counting sensor feedback influences its next action. Future work will explore the development of learning processes to improve the human–machine coexistence in space.
keywords	full paper, fabrication & robotics, non-production robotics, materials/adaptive systems, flexible structures
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	caadria2018_210
id	caadria2018_210
authors	Lin, Yuqiong, Zheng, Jingyun, Yao, Jiawei and Yuan, Philip F.
year	2018
title	Research on Physical Wind Tunnel and Dynamic Model Based Building Morphology Generation Method
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 165-174
doi	https://doi.org/10.52842/conf.caadria.2018.2.165
summary	The change of the building morphology directly affects the surrounding environment, while the evaluation of these environment data becomes the main basis for the genetic iterations of the building morphology. Indeed, due to the complexity of the outdoor natural ventilation, multiple factors in the site could be the main reasons for the change of air flow. Thus, the architect is suggested to take the wind environment as the main morphology generation factor in the early stage of the building design. Based on the research results of 2017 DigitalFUTURE Wind Tunnel Visualization Workshop, a novel self-form-finding method in design infancy has been proposed. This method uses Arduino to carry out the dynamic design of the building model, which can not only connect the sensor to monitor the wind environment data, but also contribute the building model to correlate with the wind environment data in real time. The integration of the Arduino platform and the physical wind tunnel can create the possibility of continuous and real-time physical changes, data collection and wind environment simulation, using quantitative environmental factors to control building morphology, and finally achieve the harmony among the building, environment and human.
keywords	Physical wind tunnel; dynamic model; building morphology generation; environmental performance design; wind environment visualization
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2018_085
id	caadria2018_085
authors	Chung, Chia-Chun and Jeng, Tay-Sheng
year	2018
title	Information Extraction Methodology by Web Scraping for Smart Cities - Using Machine Learning to Train Air Quality Monitor for Smart Cities
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 515-524
doi	https://doi.org/10.52842/conf.caadria.2018.2.515
summary	This paper presents an opportunistic sensing system for air quality monitoring to forecast the implicit factors of air pollution. Opportunistic sensing is performed by web scraping in the social network service to extract information. The data source for the air quality analysis combines two types of information: explicit and implicit information. The objective is to develop the information extraction methodology by web scraping for smart cities. The application development methodology has potential for solving real-world problems such as air pollution by data comparison between social activity observing and data collecting in sensor network.
keywords	smart city; open data; web scraping; social media; machine learning
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2018_1867
id	sigradi2018_1867
authors	Alawadhi, Mohammad; Yan, Wei
year	2018
title	Geometry from 3D Photogrammetry for Building Energy Modeling
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 631-637
summary	Building energy modeling requires skilled labor, and there is a need to make environmental assessments of buildings more efficient and accessible for architects. A building energy model is based on collecting data from the real, physical world and representing them as a digital model. Recent digital photogrammetry tools can reconstruct real-world geometry by transforming photographs into 3D models automatically. However, there is a lack of accessible workflows that utilize this technology for building energy modeling and simulations. This paper presents a novel methodology to generate a building energy model from a photogrammetry-based 3D model using available tools and computer algorithms.
keywords	3D scanning; Building energy modeling; Building energy simulation; Digital photogrammetry; Photo-to-BEM
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2018_333
id	caadria2018_333
authors	Cupkova, Dana, Byrne, Daragh and Cascaval, Dan
year	2018
title	Sentient Concrete - Developing Embedded Thermal and Thermochromic Interactions for Architecture and Built Environment
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 545-554
doi	https://doi.org/10.52842/conf.caadria.2018.2.545
summary	Historically, architectural design focused on adaptation of built environment to serve human needs. Recently embedded computation and digital fabrication have advanced means to actuate physical infrastructure in real-time. These 'reactive spaces' have typically explored movement and media as a means to achieve reactivity and physical deformation (Chatting et al. 2017). However, here we recontextualize 'reactive' as finding new mechanisms for permanent and non-deformable everyday materials and environments. In this paper, we describe our ongoing work to create a series of complex forms - modular concrete panels - using thermal, tactile and thermochromic responses controlled by embedded networked system. We create individualized pathways to thermally actuate these surfaces and explore expressive methods to respond to the conditions around these forms - the environment, the systems that support them, their interaction and relationships to human occupants. We outline the design processes to achieve thermally adaptive concrete panels, illustrate interactive scenarios that our system enables, and discuss opportunities for new forms of interactivity within the built environment.
keywords	Responsive environments; Geometrically induced thermodynamics; Ambient devices; Internet of things; Modular electronic systems
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2018_1879
id	sigradi2018_1879
authors	Danesh Zand, Foroozan; Baghi, Ali; Kalantari, Saleh
year	2018
title	Digitally Fabricating Expandable Steel Structures Using Kirigami Patterns
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 724-731
summary	This article presents a computational approach to generating architectural forms for large spanning structures based on a “paper-cutting” technique. In this traditional artform, a flat sheet is cut and scored in such a way that a small application of force prompts it to expand into a three-dimensional structure. To make these types of expandable structures feasible at an architectural scale, four challenges had to be met during the research. The first was to map the kinetic properties of a paper-cut model, investigating formative parameters such as the width and frequency of cuts to determine how they affect the resulting structure. The second challenge was to computationally simulate the paper-cut structure in an accurate fashion. We accomplished this task using finite element analysis in the Ansys software platform. The third challenge was to create a prediction model that could precisely forecast the characteristics of a paper-cutting pattern. We made significant strides in this demanding task by using a data-mining approach and regression analysis through 400 simulations of various cutting patterns. The final challenge was to verify the efficiency and accuracy of our prediction model, which we accomplished through a series of physical prototypes. Our resulting computational paper-cutting system can be used to estimate optimal cutting patterns and to predict the resulting structural characteristics, thereby providing greater rigor to what has previously been an ad-hoc and experimental design approach.
keywords	Transformable Paper-cut; Design method; Prediction Model; Regression analysis; Physical prototype
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ijac201816205
id	ijac201816205
authors	Faircloth,Billie; Ryan Welch, Martin Tamke, Paul Nicholas, Phil Ayres, Yulia Sinke, Brandon Cuffy and Mette Ramsgaard Thomsen
year	2018
title	Multiscale modeling frameworks for architecture: Designing the unseen and invisible with phase change materials
source	International Journal of Architectural Computing vol. 16 - no. 2, 104-122
summary	Multiscale design and analysis models promise a robust, multimethod, multidisciplinary approach, but at present have limited application during the architectural design process. To explore the use of multiscale models in architecture, we develop a calibrated modeling and simulation platform for the design and analysis of a prototypical envelope made of phase change materials. The model is mechanistic in nature, incorporates material-scale and precinct scale-attributes, and supports the design of two- and three-dimensional phase change material geometries informed by heat transfer phenomena. Phase change material behavior, in solid and liquid states, dominates the visual and numerical evaluation of the multiscale model. Model calibration is demonstrated using real-time data gathered from the prototype. Model extensibility is demonstrated when it is used by designers to predict the behavior of alternate envelope options. Given the challenges of modeling phase change material behavior in this multiscale model, an additional multiple linear regression model is applied to data collected from the physical prototype in order to demonstrate an alternate method for predicting the melting and solidification of phase change materials.
keywords	Multiscale modeling, mechanistic modeling, heat transfer modeling, phase change materials, model validation
series	journal
email
last changed	2019/08/07 14:03

_id	acadia18_336
id	acadia18_336
authors	Forren, James; Nicholas, Claire
year	2018
title	Lap, Twist, Knot. Intentionality in digital-analogue making environments
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 336-341
doi	https://doi.org/10.52842/conf.acadia.2018.336
summary	This paper discusses a theoretical approach and method of making in computational design and construction. The project examines digital and analogue building practices through a social anthropological and STS lens to better understand the use of technology in complex making environments. We position this with respect to contemporary investigations of materials in architecture which use physical and virtual prototyping and collaborative building. Our investigation extends this work by parsing complex making through ethnographic analysis. In doing so we seek to recalibrate computational design methods which privilege rote execution of digital form. This inquiry challenges ideas of agency and intention as ‘enabled’ by new technologies or materials. Rather, we investigate the troubling (as well as extension) of explicit designer intentions by the tacit intentions of technologies. Our approach is a trans-disciplinary investigation synthesizing architectural making and ethnographic analysis. We draw on humanistic and social science theories which examine activities of human-technology exchange and architectural practices of algorithmic design and fabrication. We investigate experimental design processes through prototyping architectural components and assemblies. These activities are examined by collecting data on human-technology interactions through field notes, journals, sketches, and video recordings. Our goal is to foster (and acknowledge) more complex, socially constructed methods of design and fabrication. This work in progress, using a cement composite fabric, is a preliminary study for a larger project looking at complex making in coordination with public engagement.
keywords	work in progress, illusory dichotomies, design theory & history, materials/adaptive systems, collaboration, hybrid practices
series	ACADIA
type	paper
email
last changed	2022/06/07 07:51

_id	ecaade2018_145
id	ecaade2018_145
authors	Fukuda, Tomohiro, Zhu, Yuehan and Yabuki, Nobuyoshi
year	2018
title	Point Cloud Stream on Spatial Mixed Reality - Toward Telepresence in Architectural Field
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 727-734
doi	https://doi.org/10.52842/conf.ecaade.2018.2.727
summary	In remote meetings that involve the study of buildings and cities, sharing three-dimensional (3D) virtual spatial of buildings and cities is just as necessary as sharing the appearances and voices of meeting participants. Because of this, system development and pilot projects have attempted to share 3D virtual models via the internet in real-time but is still insufficient compared with face-to-face meeting. Therefore, this research explores the applicability of a spatial mixed reality (MR) system that displays point cloud streams to realize 3D remote meeting in architecture and urban fields. MR is a new technology that enables 3D presentations of various information, combining the physical and virtual worlds. One MR method is telepresence, which is expected to give people a way to communicate remotely as if face to face in a realistic way. We first developed a MR system named PcsMR (Point cloud stream on mixed reality) to display point cloud streams. The PcsMR system's operation consists of generating and transferring a point cloud stream and then rendering a point cloud stream using MR. The PcsMR acquired the point cloud stream in real-time using Kinect for Windows v2 and transferred it to Microsoft HoloLens, which uses optical see-through MR. Then we constructed two prototypes based on PcsMR and carried out pilot projects. Through observing the experiments, application possibilities for architecture and urban fields are found in meetings and communications that share real-time 3D objects and include the movement of remote participants and objects. The proposed method was evaluated feasible and effective.
keywords	Telepresence; Mixed reality; Point cloud stream; Remote meeting; Real time
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ijac201816102
id	ijac201816102
authors	Harmon, Brendan A.; Anna Petrasova, Vaclav Petras, Helena Mitasova and Ross Meentemeyer
year	2018
title	Tangible topographic modeling for landscape architects
source	International Journal of Architectural Computing vol. 16 - no. 1, 4-21
summary	We present Tangible Landscape—a technology for rapidly and intuitively designing landscapes informed by geospatial modeling, analysis, and simulation. It is a tangible interface powered by a geographic information system that gives three- dimensional spatial data an interactive, physical form so that users can naturally sense and shape it. Tangible Landscape couples a physical and a digital model of a landscape through a real-time cycle of physical manipulation, three-dimensional scanning, spatial computation, and projected feedback. Natural three-dimensional sketching and real-time analytical feedback should aid landscape architects in the design of high performance landscapes that account for physical and ecological processes. We conducted a series of studies to assess the effectiveness of tangible modeling for landscape architects. Landscape architecture students, academics, and professionals were given a series of fundamental landscape design tasks—topographic modeling, cut-and-fill analysis, and water flow modeling. We assessed their performance using qualitative and quantitative methods including interviews, raster statistics, morphometric analyses, and geospatial simulation. With tangible modeling, participants built more accurate models that better represented morphological features than they did with either digital or analog hand modeling. When tangibly modeling, they worked in a rapid, iterative process informed by real-time geospatial analytics and simulations. With the aid of real-time simulations, they were able to quickly understand and then manipulate how complex topography controls the flow of water.
keywords	Human–computer interaction, tangible interfaces, tangible interaction, landscape architecture, performance, geospatial modeling, topographic modeling, hydrological modeling
series	journal
email
last changed	2019/08/07 14:03

_id	ecaade2018_141
id	ecaade2018_141
authors	Hermund, Anders, Klint, Lars Simon, Bundgaard, Ture Slot and Noël Meedom Meldgaard Bj?rnson-Langen, Rune
year	2018
title	The Perception of Architectural Space in Reality, in Virtual Reality, and through Plan and Section Drawings - A case study of the perception of architectural atmosphere
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 735-744
doi	https://doi.org/10.52842/conf.ecaade.2018.2.735
summary	This paper presents the findings from a comparative study of an architectural space communicated as the space itself and its two different representations, i.e. a virtual reality model and traditional plan and section drawings. Using eye tracking technology in combination with qualitative questionnaires, a case study of an architectural space is investigated in physical reality, a virtual reality 3D BIM model, and finally through representation of the space in plan and section drawings. In this study, the virtual reality scenario seems closer to reality than the experience of the same space experienced through plan and section drawings. There is an overall higher correlation of both the conscious reflections and the less conscious behaviour between the real physical architectural space and the virtual reality space, than there is between the real space and the space communicated through plan and section drawings. We can conclude that the scenario with the best overall size estimations, compared to the actual measures, is the virtual reality scenario. The paper further discusses the future applications of virtual reality in architecture.
keywords	Architectural representation; Virtual Reality; Perception; Tradition
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia18_118
id	acadia18_118
authors	Kalantari, Saleh; Contreras-Vidal, Jose Luis; Smith, Joshua Stanton; Cruz-Garza, Jesus; Banner, Pamela
year	2018
title	Evaluating Educational Settings through Biometric Data and Virtual Response Testing
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 118-125
doi	https://doi.org/10.52842/conf.acadia.2018.118
summary	The physical design of the learning environment has been shown to contribute significantly to student performance and educational outcomes. However, the existing literature on this topic relies primarily on generalized observations rather than on rigorous empirical testing. Broad trends in environmental impacts have been noted, but there is a lack of detailed evidence about how specific design variables can affect learning performance. The goal of this study was to apply a new approach in examining classroom design innovations. We developed a protocol to evaluate the effectiveness of classroom designs by measuring the physical responses of study participants as they interacted with different designs using a virtual reality platform. Our hypothesis was that virtual “test runs” can help designers to identify potential problems and successes in their work prior to its being physically constructed. The results of our initial pilot study indicated that this approach could yield important results about human responses to classroom design, and that the virtual environment seemed to be a reliable testing substitute when compared against real classroom environments. In addition to leading toward practical conclusions about specific classroom design variables, this project provides a new kind of research method and toolset to test the potential human impacts of a wide variety of architectural innovations.
keywords	work in progress, signal processing, eeg, virtual reality, big data, learning performance
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	ecaade2018_260
id	ecaade2018_260
authors	Kallegias, Alexandros
year	2018
title	Design by Computation - A material driven study
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 279-284
doi	https://doi.org/10.52842/conf.ecaade.2018.2.279
summary	The paper aims to address methods of creating a system for design through material studies that are employed as feedback on a computational digital model. The case study described in this paper is the output of an exploration that has investigated physical transformation, interaction and wood materiality over the period of two weeks of the international architecture programme AA Athens Visiting School in Greece. Real-time performative form-responsive methods based on bending and stretching have been developed and simulated in an open-source programming environment. The output of the simulation has been informed by the results of material tests that took place in parallel and have served as inputs for the fine-tuning of the simulation. Final conclusions were made possible from these explorations that enabled the fabrication of a prototype using wood veneer at one-to-one scale. From a pedagogical aspect, the research main focus is to improve the quality of architectural education by learning through making. This is made possible using advanced computational techniques and coupling them with material studies towards an integrated system for architectural prototypes within a limited time frame.
keywords	materiality; computation; 1:1 scale prototyping; simulation; fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2018_230
id	ecaade2018_230
authors	Kreutzberg, Anette
year	2018
title	Visualising Architectural Lighting Concept with 360° Panoramas
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 745-752
doi	https://doi.org/10.52842/conf.ecaade.2018.2.745
summary	This paper presents the establishment and refinement of a visualisation workflow based on initial learnings from introducing mobile Virtual Reality (VR) as representational medium for visualising and visually evaluating architectural lighting concepts using rendered 360° panoramas. Four student projects are described, each with a different aim and approach towards visualising architectural light in space: Two projects aiming at conveying reality with physically based lighting simulations and two projects with an artistic approach to conveying light impressions. The 360° panoramas were used at low resolution during the design process to qualify the projects, and the final panoramas were presented with great success as a supplement to visualisations, diagrams, technical drawings and physical models at Bachelor and Master exams. The benefits of using familiar simulation and render software together with low cost, accessible and portable VR HMD's in the authors opinion far outweighs the reduced Field of View, lower frame-rate, lack of parallax and dynamic Point of View compared to realtime rendered high end VR.
keywords	Architectural lighting; 360° panorama; Virtual Reality; Visualisation workflow
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2018_213
id	ecaade2018_213
authors	Lohse, Theresa, Fujii, Ryuta and Werner, Liss C.
year	2018
title	Multi-Dimensional Interface Based Spatial Adaption - A Prototype For A Multi-Sensory User Interface Employing Elastic Materials
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 169-176
doi	https://doi.org/10.52842/conf.ecaade.2018.2.169
summary	Patten and Ishii (2000) discovered that people are employing more versatile strategies for spatial distribution when using a tangible user interface (TUI) as opposed to a graphics user interface (GUI) (Patten & Ishii, 2000). Besides, the generated information outputs of conventional two-dimensional interacting screens are currently almost entirely addressing the visual and acoustic senses but lacking in other sensory stimuli - such as haptic, body equilibrium and sense of gravity. With the experiment described here, the multi-dimensionality of both the input on the interface and the output of the human interaction will be challenged. This paper aims to introduce a method to a real world versatile three-dimensional interface actuating a simulated spatial environment that substantiates the more unconventional sensory perception mentioned above. A physical prototype using an Arduino will be assembled to test the feasibility of the structure.
keywords	spatial formation; virtual reality; tangible user interface; body equilibrium; physical computing
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2018_1245
id	sigradi2018_1245
authors	Mizrahy Cuperschmid, Ana Regina; Magalhães Castriotto, Caio
year	2018
title	Teaching BIM modeling in the architecture course: using a Blended Learning Strategy
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 942-947
summary	From the second year of the architecture course, a discipline is offered to introduce the BIM concept using an architectural modeling software. To optimize learning in the discipline and allow students to have a face-to-face period to discuss BIM theory, the use of Blended Learning was proposed - a learning method that combines face-to-face classroom interactivity in a physical space with digital media and online activities. For this purpose, video classes with BIM modeling tutorials were developed. The employed process proved to be efficient and may be an alternative to the conventional learning process in architecture.
keywords	BIM; Building Information Modeling; Blended Learning; Architecture; Teaching
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	sigradi2018_1486
id	sigradi2018_1486
authors	Peroza Piaia, Luana; Cybis Pereira, Alice Theresinha; Secchi, Carla Cristina
year	2018
title	Furniture kits and physical model as a tool for visualization of the minimum residential spaces according to the anthropometric ergonomics
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 86-91
summary	This paper presents the results obtained through the development of furniture kits and physical model, aiming to compare the minimum design requirements described in the anthropometric ergonomics, current housing program and construction law. The qualitative approach through bibliographical and documentary revision allowed the choice of technical representation, using BIM software for design and subsequent digital prototyping. It concludes that the creation of environments according to the minimum requirements does not allow the use of space according to its purpose, and by making use of furniture kits, it is possible to obtain experiments and better understanding.
keywords	Physical model; Housing of social interest; Rapid prototyping; Minimal spaces; Anthropometric ergonomics
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ecaade2018_298
id	ecaade2018_298
authors	Rossi, Gabriella and Nicholas, Paul
year	2018
title	Modelling A Complex Fabrication System - New design tools for doubly curved metal surfaces fabricated using the English Wheel
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 811-820
doi	https://doi.org/10.52842/conf.ecaade.2018.1.811
summary	Standard industrialization and numeration models fail to translate the richness and complexity of traditional crafts into the making of the architectural elements, which excludes them from the industry. This paper introduces a new way of modelling a complex craft fabrication method, namely the English Wheel, that is based on the creation of a cyber-physical system. The cyber-physical system connects a robotic arm and an artificial neural network. The robot arm controls the movement of a metal sheet through the English wheel to achieve desired geometries according to toolpaths and predicted deformations specified by the neural network. The method is demonstrated through the making of 1:1 design probes of doubly curved metal surfaces.
keywords	Digital craft; metal forming; doubly curved surfaces; robotic fabrication; neural networks; cyber-physical system
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: