Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 604

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2018_397
id	ecaade2018_397
authors	Stellingwerff, Martijn, Gordijn, Johannetta, Ouwerkerk, Udo and Kiela, Peter
year	2018
title	Improving the Online Design Education Experience
doi	https://doi.org/10.52842/conf.ecaade.2018.1.401
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 401-408
summary	Design education usually takes place in a studio setting, in which visual and spatial artefacts are produced, shared, improved, presented and commented. This specific setting comes with qualitative properties that allow for situated learning with object-oriented focus and interaction, combined with a rich collegial context in which ideas can flourish and certain values and ethics are cherished. Using our education platform for online learning, we noticed the lack of support for typical creative and social design studio aspects, while factual classroom education was well supported. This paper describes how we attempt to translate the qualities of the studio education setting into an online environment for design education. Our approach is not to build a Virtual Design Studio (VDS) from the bottom up, but instead, to build on top of our universities' online education platform of choice. The paper commences with a short description of design education in a studio setting. Then a number of basic principles of design studio education is applied to the development of two Massive Open Online Courses (MOOCs). In the last section we discuss the different setups and compare the online aspects with on campus design studio education.
keywords	Online design education; MOOC; Creative Learning Environment
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2018_1806
id	sigradi2018_1806
authors	Barbosa Cabral, Sthefane Adrielly; Alejandro Nome, Carlos; Queiroz, Natália
year	2018
title	Pilot study of numerical modeling tool to evaluate the thermal performance of walls according to Brazilian standards
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 286-293
summary	The paper discusses a numerical modeling tool to evaluate thermal performance of building envelope according to Brazilian NBR15.220 and NBR 15.575 standards. Contemporary integrated design processes require the development of early design stage decision support mechanisms in order to optimize building performance. The development of the proposed tool focused on early stage decisions on building envelope design and integrating tool usability in the design process. Results indicate that the proposed tool provides basis for decision making that respond to Brazilian standards previously disregarded by participants. Also indicate improved understanding on parameters that affect building envelope thermal performance.
keywords	Thermal performance, Numeric modeling tool, Building envelope, Evidence Based Design
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia18_118
id	acadia18_118
authors	Kalantari, Saleh; Contreras-Vidal, Jose Luis; Smith, Joshua Stanton; Cruz-Garza, Jesus; Banner, Pamela
year	2018
title	Evaluating Educational Settings through Biometric Data and Virtual Response Testing
doi	https://doi.org/10.52842/conf.acadia.2018.118
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 118-125
summary	The physical design of the learning environment has been shown to contribute significantly to student performance and educational outcomes. However, the existing literature on this topic relies primarily on generalized observations rather than on rigorous empirical testing. Broad trends in environmental impacts have been noted, but there is a lack of detailed evidence about how specific design variables can affect learning performance. The goal of this study was to apply a new approach in examining classroom design innovations. We developed a protocol to evaluate the effectiveness of classroom designs by measuring the physical responses of study participants as they interacted with different designs using a virtual reality platform. Our hypothesis was that virtual “test runs” can help designers to identify potential problems and successes in their work prior to its being physically constructed. The results of our initial pilot study indicated that this approach could yield important results about human responses to classroom design, and that the virtual environment seemed to be a reliable testing substitute when compared against real classroom environments. In addition to leading toward practical conclusions about specific classroom design variables, this project provides a new kind of research method and toolset to test the potential human impacts of a wide variety of architectural innovations.
keywords	work in progress, signal processing, eeg, virtual reality, big data, learning performance
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	sigradi2018_1315
id	sigradi2018_1315
authors	Schmitt Soster, Sandra; Pratschke, Anja; do Nascimento Inocêncio, Maria Vitória; Cardoso, Maria Clara
year	2018
title	Virtual Paths: Collaborations in Narratives of Cultural Heritage of São Carlos-SP
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 955-960
summary	The "Virtual Paths: Collaborations in Narratives of Cultural Heritage of São Carlos" Extension Project sought to analyze the use of the QR Code, which directs the user to an online portal containing information about historical buildings in São Carlos, to complement the dissemination of the city's cultural heritage. As a pilot case, during the year of research, QR Codes were developed for the São Carlos Railway Station. This process seeks to diversify the dissemination of information on heritage and promote greater engagement of the local community, as an invitation to an augmented tour through the monuments of the city.
keywords	Cultural heritage; Digital media; QR Code
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ecaade2018_227
id	ecaade2018_227
authors	Chatzitsakyris, Panagiotis
year	2018
title	EventMode - A new computational design tool for integrating human activity data within the architectural design workflow
doi	https://doi.org/10.52842/conf.ecaade.2018.1.649
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 649-656
summary	Architectural designers are currently depending on a multitude of elaborate computational tools in order to explore, manipulate and visualize the geometric form of their building projects. However, if architecture can be perceived as the manipulation of geometric form in direct relation to human activities and events that take place inside it, then it is evident that such design parameters are not sufficiently represented in the currently available modeling software. Would it be possible to introduce the human activity element in the aforementioned computational tools in a way that informs the design process and improves the final building product? This paper attempts to answer this question by introducing a new experimental design tool that enables the creation of parametric human activity envelopes within three-dimensional digital models. The novel approach is that this tool enables the parametric interaction of these components with the actual building geometry and generates novel visual and data representations of the 3D model. The goal is to improve the decision-making process of architects as well as their clients by enabling them to evaluate and iterate their designs based not only on the building's form but also on the human spatial events that take place inside it. A prototype implementation demonstrates the tool's practical application through three design examples.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2018_399
id	ecaade2018_399
authors	Cutellic, Pierre
year	2018
title	UCHRON - An Event-Based Generative Design Software Implementing Fast Discriminative Cognitive Responses from Visual ERP BCI
doi	https://doi.org/10.52842/conf.ecaade.2018.2.131
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 131-138
summary	This research aims at investigating BCI technologies in the broad scope of CAAD applications exploiting early visual cognition in computational design. More precisely, this paper will describe the investigation of key BCI and ML components for the implementation and development of a software supporting this research : Uchron. It will be organised as follows. Firstly, it will introduce the pursued interest and contribution that visual-ERP EEG based BCI application for Generative Design may provide through a synthetic review of precedents and BCI technology. Secondly, selected BCI components will be described and a methodology will be presented to provide an appropriate framework for a CAAD software approach. This section main focus is on the processing component of the BCI. It distinguishes two key aspects of discrimination and generation in its design and proposes a new model based on GAN for modulated adversarial design. Emphasis will be made on the explicit use of inference loops integrating fast human cognitive responses and its individual capitalisation through time in order to reflect towards the generation of design and architectural features.
keywords	Human Computer Interaction; Neurodesign; Generative Design; Design Computing and Cognition; Machine Learning
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_176
id	ecaade2018_176
authors	Fisher-Gewirtzman, Dafna and Polak, Nir
year	2018
title	Integrating Crowdsourcing & Gamification in an Automatic Architectural Synthesis Process
doi	https://doi.org/10.52842/conf.ecaade.2018.1.439
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 439-444
summary	This work covers the methodological approach that is used to gather information from the wisdom of crowd, to be utilized in a machine learning process for the automatic generation of minimal apartment units. The flexibility in the synthesis process enables the generation of apartment units that seem to be random and some are unsuitable for dwelling. Thus, the synthesis process is required to classify units based on their suitability. The classification is deduced from opinions of human participants on previously generated units. As the definition of "suitability" may be subjective, this work offers a crowdsourcing method in order to reach a large number of participants, that as a whole would allow to produce an objective classification. Gaming elements have been adopted to make the crowdsourcing process more intuitive and inviting for external participants.
keywords	crowdsourcing and gamification; urban density; optimization; automated architecture synthesis; minimum apartments; visual openness
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2018_162
id	caadria2018_162
authors	Hawton, Dominic, Cooper-Wooley, Ben, Odolphi, Jorke, Doherty, Ben, Fabbri, Alessandra, Gardner, Nicole and Haeusler, M. Hank
year	2018
title	Shared Immersive Environments for Parametric Model Manipulation - Evaluating a Workflow for Parametric Model Manipulation from Within Immersive Virtual Environments
doi	https://doi.org/10.52842/conf.caadria.2018.1.483
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 483-492
summary	Virtual reality (VR) and augmented reality (AR) provide designers with new visual mediums through which to communicate their designs. There is great potential for these mediums to positively augment current visual communication methods by improving remote collaboration. Enabling designers to interact with familiar computational tools through external virtual interfaces would allow them to both calibrate design parameters and visualise parametric outcomes from within the same immersive virtual environment. The current research outlines a workflow for parametric manipulation and mesh replication between immersive applications developed in the Unity game engine and McNeel's Grasshopper plugin. This paper serves as a foundation for future research into integrating design tools with external VR and AR applications in an effort of enhancing remote collaborative designs.
keywords	Augmented Reality; Virtual Reality; Parametric Design; Procedural; Grasshopper
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	caadria2018_161
id	caadria2018_161
authors	Huang, Xiaoran, White, Marcus and Burry, Mark
year	2018
title	Design Globally, Immerse Locally - A Synthetic Design Approach by Integrating Agent Based Modelling with Virtual Reality
doi	https://doi.org/10.52842/conf.caadria.2018.1.473
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 473-482
summary	The last three decades have witnessed the explosion of technology and its impact on the architecture discipline which has drastically changed the methods of design. New techniques such as Agent-based modeling (ABM) and Virtual Reality (VR) have been widely implemented in architectural and urban design domains, yet the potential integration between these two methods remains arguably unexploited. The investigation in this paper aims to probe the following questions: How can architects and urban designers be informed more comprehensively by melding ABM and VR techniques at the preliminary/conceptual design stage? Which platform is considered more appropriate to facilitate a user-friendly system and reduces the steep learning curve? And what are the potential benefits of this approach in architectural education, particularly for the design studio environment? With those questions, we proposed a prototype in Unity, a multi-platform development tool that originated from the game industry, to simulate and visualize pedestrian behaviors in urban environments with immersive design experience and tested it in a scenario-based case study. This approach has also been further tested in an architectural design studio, demonstrating its technical feasibility as well as the potential contributions to the pedagogy.
keywords	Agent based modelling; Virtual Reality; Urban Design
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ecaade2018_317
id	ecaade2018_317
authors	Kontovourkis, Odysseas and Doumanidis, Constantine C
year	2018
title	ICARUS Project - An Open Source Platform for Computer Programming in Architectural Teaching and Research
doi	https://doi.org/10.52842/conf.ecaade.2018.1.341
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 341-350
summary	This paper, presents an ongoing work entitled ICARUS, an abbreviation for 'Integrating Computerized ARchitecture with USers'. The aim of this work is to develop an open source platform for computer programming implemented in architecture, for teaching and research. In particular, the platform provides the framework for a simplified and user friendly textual programming methodology for the needs of our architectural institution. It consists of several modules like coding, plug-in and repository development, targeting to be publicly available in the future. The platform is created based on the Python programming language, which is run in Grasshopper, a plug-in for Rhino 3D. In the first phase of ICARUS development, several case studies within the framework of a postgraduate course are conducted, aiming at providing an overview of its potentials, limitations and generally, its impact on establishing a useful methodology for algorithmic thinking among students with little or no prior computer programming skills.
keywords	Computer programming; Open source platform; Parametric design; Plug-in development; Algorithmic thinking
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2023_362
id	caadria2023_362
authors	Luo, Jiaxiang, Mastrokalou, Efthymia, Aldabous, Rahaf, Aldaboos, Sarah and Lopez Rodriguez, Alvaro
year	2023
title	Fabrication of Complex Clay Structures Through an Augmented Reality Assisted Platform
doi	https://doi.org/10.52842/conf.caadria.2023.1.413
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 413–422
summary	The relationship between clay manufacturing and architectural design has a long trajectory that has been explored since the early 2000s. From a 3D printing or assembly perspective, using clay in combination with automated processes in architecture to achieve computational design solutions is well established. (Yuan, Leach & Menges, 2018). Craft-based clay art, however, still lacks effective computational design integration. With the improvement of Augmented Reality (AR) technologies (Driscoll et al., 2017) and the appearance of digital platforms, new opportunities to integrate clay manufacturing and computational design have emerged. The concept of digitally transferring crafting skills, using holographic guidance and machine learning, could make clay crafting accessible to more workers while creating the potential to share and exchange digital designs via an open-source manufacturing platform. In this context, this research project explores the potential of integrating computational design and clay crafting using AR. Moreover, it introduces a platform that enables AR guidance and the digital transfer of fabrication skills, allowing even amateur users with no prior making experience to produce complex clay components.
keywords	Computer vision, Distributed manufacturing, Augmented craftsmanship, Augmented reality, Real-time modification, Hololens
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	ecaade2018_210
id	ecaade2018_210
authors	Ezzat, Mohammed
year	2018
title	A Computational Tool for Mapping the Users' Urban Cognition - A Framework and a Representation for the Evolutionary Optimization of the Fuzzy Binary Relation between the Urban Conceptions of "Us" and "Others"
doi	https://doi.org/10.52842/conf.ecaade.2018.1.667
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 667-676
summary	The paper proposes a computational tool for simulating the users' urban cognitive systems, or more specifically the long-term memory associated with the knowledge of urbanism and its related urban visual features. The tool builds on our comprehensive theory of Urbanism, which presents a monolithic, structured, comprehensive, professional conception of Urbanism based on which any relativistic users' urban conceptions could be predicted as a restructuring of the professional conception. These versatile relativistic conceptions would emerge based on a nurturing environment, which is a conception of the empirical/anthropological collected data of the intended users' reflections against their preferred constructed urban environments. Once the users' conceptions of Urbanism are formulated, which is the first phase of the simulation, the users' impressions against any examined urban constructs are attainable, which is the second phase of the simulation. The two phases, the framework, would be monolithically represented by a proposed novel cellular graph. The proposed computational tool is thought of as a robust technique for the computational incorporation of the users' urban identity, and some of its constituents could be considered as a needed common platform of communication for a successful Human-Computer interaction in the field of urban analysis/design.
keywords	a comprehensive model of Urbanism; a default professional conception of Urbanism; the relativistic users' conceptions of Urbanism ; recognized extracted urban features ; the users' urban identity; A comprehensive theory for space syntax:
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ijac201816205
id	ijac201816205
authors	Faircloth,Billie; Ryan Welch, Martin Tamke, Paul Nicholas, Phil Ayres, Yulia Sinke, Brandon Cuffy and Mette Ramsgaard Thomsen
year	2018
title	Multiscale modeling frameworks for architecture: Designing the unseen and invisible with phase change materials
source	International Journal of Architectural Computing vol. 16 - no. 2, 104-122
summary	Multiscale design and analysis models promise a robust, multimethod, multidisciplinary approach, but at present have limited application during the architectural design process. To explore the use of multiscale models in architecture, we develop a calibrated modeling and simulation platform for the design and analysis of a prototypical envelope made of phase change materials. The model is mechanistic in nature, incorporates material-scale and precinct scale-attributes, and supports the design of two- and three-dimensional phase change material geometries informed by heat transfer phenomena. Phase change material behavior, in solid and liquid states, dominates the visual and numerical evaluation of the multiscale model. Model calibration is demonstrated using real-time data gathered from the prototype. Model extensibility is demonstrated when it is used by designers to predict the behavior of alternate envelope options. Given the challenges of modeling phase change material behavior in this multiscale model, an additional multiple linear regression model is applied to data collected from the physical prototype in order to demonstrate an alternate method for predicting the melting and solidification of phase change materials.
keywords	Multiscale modeling, mechanistic modeling, heat transfer modeling, phase change materials, model validation
series	journal
email
last changed	2019/08/07 14:03

_id	acadia20_574
id	acadia20_574
authors	Nguyen, John; Peters, Brady
year	2020
title	Computational Fluid Dynamics in Building Design Practice
doi	https://doi.org/10.52842/conf.acadia.2020.1.574
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 574-583.
summary	This paper provides a state-of-the-art of computational fluid dynamics (CFD) in the building industry. Two methods were used to find this new knowledge: a series of interviews with leading architecture, engineering, and software professionals; and a series of tests in which CFD software was evaluated using comparable criteria. The paper reports findings in technology, workflows, projects, current unmet needs, and future directions. In buildings, airflow is fundamental for heating and cooling, as well as occupant comfort and productivity. Despite its importance, the design of airflow systems is outside the realm of much of architectural design practice; but with advances in digital tools, it is now possible for architects to integrate air flow into their building design workflows (Peters and Peters 2018). As Chen (2009) states, “In order to regulate the indoor air parameters, it is essential to have suitable tools to predict ventilation performance in buildings.” By enabling scientific data to be conveyed in a visual process that provides useful analytical information to designers (Hartog and Koutamanis 2000), computer performance simulations have opened up new territories for design “by introducing environments in which we can manipulate and observe” (Kaijima et al. 2013). Beyond comfort and productivity, in recent months it has emerged that air flow may also be a matter of life and death. With the current global pandemic of SARS-CoV-2, it is indoor environments where infections most often happen (Qian et al. 2020). To design architecture in a post-COVID-19 environment will require an in-depth understanding of how air flows through space.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	sigradi2021_226
id	sigradi2021_226
authors	Pincheira, Milena, Alarcón, Catalina, Rivera, María Isabel and Martínez, Andrea
year	2021
title	Daylighting and the Elderly: A Study of Daylight Accessibility and Envelope Retrofit in Southern Chile's Senior Home
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1333–1344
summary	In the next 25 years, the elderly population will increase on average to 65 thousand people annually in Chile (INE, 2018). Their independent living is jeopardized partially for diminished visual capacity that difficult spatial perception. Although light does not correct vision impairment, adequate light levels can respond to the needs of older people as preventing visual errors. This study evaluates daylighting availability in an assisting living residence in a southern city in Chile. A quantitative approach resulted in the identification of envelope-retrofit strategies that allow achieving recommended levels of natural lighting, particularly in shared spaces where residents spend most of the day. The results show that it would be possible to achieve better light availability, as it also allows for a better understanding of the contributions of the building envelope. Finally, the study outlines recommendations for future retrofits that meet requirements for visual comfort for a growing senior population.
keywords	Daylighting Accessibility, Senior Home, Daylighting Strategies, Visual Comfort, Computational Simulation.
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	ecaadesigradi2019_101
id	ecaadesigradi2019_101
authors	Tebaldi, Isadora, Henriques, Gonçalo Castro and Passaro, Andres Martin
year	2019
title	A Generative System for the Terrain Vague - Transcarioca Bus Expressway in Rio de Janeiro
doi	https://doi.org/10.52842/conf.ecaade.2019.1.035
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
summary	The transport infrastructures are important elements in the cities, but, as there is a lack of planning, they tear through the urban fabric and leave empty spaces. Due to government and private disinterest, these spaces become vacant, forgotten and degraded. However, these extensive Terrain Vague offer new potential for urban use. To exploit this potential, we need methodologies that can offer personalised, extensive, feasible urban solutions. For this, we propose a computational generative system, following a 4-step methodology: 1) Site analyses and Terrain Vague identification; 2) Site classification according to parameters based on a "visual grammar"; 3) Algorithm associating space properties with geometric transformation to generate solutions: namely transformative operations in public spaces, additive transformations in semi-public spaces and subtractive operations in semi-private spaces; 4) Solution evaluation and development, according to shade criteria, spatial hierarchy and volumetric density. With our own algorithms combined with genetic algorithms, we guided the evolution of 50 volumetric solutions. The exponential increase in information requires new methodologies (Schwab, 2018). Results show the potential of computational methodologies to produce extensive urban solutions. This research, developed in a final graduation project in Architecture, aims at stimulating generative methodologies in undergraduate courses.
keywords	Terrain Vague; generative systems; parametric urbanism; genetic algorithms
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	sigradi2018_1671
id	sigradi2018_1671
authors	Brito, Michele; de Sá, Ana Isabel; Borges, Jéssica; Rena, Natacha
year	2018
title	IndAtlas - Technopolitic platform for urban investigation
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1305-1312
summary	This article presents the project of the urban research platform IndAtlas, currently in early development stage by UFMG’s Research Group Indisciplinar. Through the association of crowdsourcing tools, a spatial database and the production of visualizations of different types, it is intended to create a Web platform for collecting, analyzing and depicting information about processes of production and transformation of urban space. It is proposed that the phenomena (themes) investigated in the platform are approached mainly from four axes: 1) spatial / territorial; 2) temporal; 3) social; 4) communicational. To do this, we try to combine online collaborative maps with the production of dynamic timelines and visualizations of networks of social actors (graphs), connected with social networks and Wiki pages. The article will address the development of Indisciplinar’s working method, which guided the proposal of the platform, as well as the functional and technical aspects to be observed for its implementation, the proposed architecture and the importance of interoperability for the project. Finally, the inquiries derived from the first test experiment of an IndAtlas test prototype will be presented. The experiment took place in a workshop belonging to the Cidade Eletrônika 2018 Festival – an arts and technology event. The workshop was offered in January of the same year, and it proposed a collaborative cartography of the Santa Tereza neighborhood, in Belo Horizonte / MG – a traditional neighborhood of great importance for historical heritage, currently subject to great real estate pressure and the focus of a series of territorial disputes.
keywords	IndAtlas, Crowdsourcing, Urban Technopolitics,, Digital Cartographies,, Spatial Data.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia18_108
id	acadia18_108
authors	Sanchez, Jose
year	2018
title	Platforms for Architecture: Imperatives and Opportunities of Designing Online Networks for Design
doi	https://doi.org/10.52842/conf.acadia.2018.108
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 108-117
summary	The rise of platforms such as Facebook, YouTube, and Uber, initially celebrated as part of a disruptive new era of the internet, has slowly been reassessed as a problematic and unregulated form of twenty-first-century info-capitalism that contributes to inequality, mistrust, and user polarization. The internet has become a place for content creation, not only consumption, and the content freely created by the network of users has defined a self-organizing system of ad-hoc audiences following echo chambers organized through artificial intelligence, which amplifies previously identified trends. While a large portion of the content created by users seems to be aimed at personal forms of entertainment, a few remarkable projects, such as Wikipedia, have allowed hundreds of users to contribute to a collective goal. While we can observe that the platform model has appeared in diverse disciplines, allowing the creation of content from news articles to music, we have not seen the emergence of a robust design platform intended to proliferate and advance the discipline of architecture. This paper makes the case that video game technology and its audiences have reached a state of technical capability that could allow for architectural platforms to emerge, one in which players could learn, create, and share architectural designs. Such a platform comes with a series of ethical imperatives, questions of value proposition, and liabilities, as well as a high potential to communicate and proliferate architectural knowledge and know-how. Common’hood, currently under development, will be used as a case study to engage the development of an ethical architectural platform that develops a proposition towards authorship, ownership, and collective engagement.
keywords	full paper, platforms, capitalism, network, video game, combinatorics, information theory, entropy, co-ops, platform cooperativism, privacy, encryption
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	sigradi2018_1628
id	sigradi2018_1628
authors	Agirbas, Asli
year	2018
title	The Use of Multi-Software in Undergraduate Architectural Design Studio Education: A Case Study
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1059-1064
summary	In the architectural design process, instead of using the computer programs effectively, the ability of choosing the most suitable program for the purpose takes place. However, different programs used in the design process serve different purposes. Therefore, the use of more than one program throughout the project design process arises. Every day the number of programs used increases rapidly. Hence, the designers find difficult to adapt this speed. The same applies to the students of architectural design studio course. Therefore, in this study with undergraduate architecture students, a pilot study focusing on the use of multi-software was conducted within the scope of architectural design studio. The process and outputs were evaluated.
keywords	Use of multi-software; Contextual design; Architectural design education; CAAD
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_145
id	ecaade2018_145
authors	Fukuda, Tomohiro, Zhu, Yuehan and Yabuki, Nobuyoshi
year	2018
title	Point Cloud Stream on Spatial Mixed Reality - Toward Telepresence in Architectural Field
doi	https://doi.org/10.52842/conf.ecaade.2018.2.727
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 727-734
summary	In remote meetings that involve the study of buildings and cities, sharing three-dimensional (3D) virtual spatial of buildings and cities is just as necessary as sharing the appearances and voices of meeting participants. Because of this, system development and pilot projects have attempted to share 3D virtual models via the internet in real-time but is still insufficient compared with face-to-face meeting. Therefore, this research explores the applicability of a spatial mixed reality (MR) system that displays point cloud streams to realize 3D remote meeting in architecture and urban fields. MR is a new technology that enables 3D presentations of various information, combining the physical and virtual worlds. One MR method is telepresence, which is expected to give people a way to communicate remotely as if face to face in a realistic way. We first developed a MR system named PcsMR (Point cloud stream on mixed reality) to display point cloud streams. The PcsMR system's operation consists of generating and transferring a point cloud stream and then rendering a point cloud stream using MR. The PcsMR acquired the point cloud stream in real-time using Kinect for Windows v2 and transferred it to Microsoft HoloLens, which uses optical see-through MR. Then we constructed two prototypes based on PcsMR and carried out pilot projects. Through observing the experiments, application possibilities for architecture and urban fields are found in meetings and communications that share real-time 3D objects and include the movement of remote participants and objects. The proposed method was evaluated feasible and effective.
keywords	Telepresence; Mixed reality; Point cloud stream; Remote meeting; Real time
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: