Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 627

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2023_395
id	caadria2023_395
authors	Luo, Jiaxiang, Mastrokalou, Efthymia, Aldaboos, Sarah and Aldabous, Rahaf
year	2023
title	Research on the Exploration of Sprayed Clay Material and Modeling System
doi	https://doi.org/10.52842/conf.caadria.2023.2.231
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 231–240
summary	As a traditional building material, clay has been used by humans for a long time. From early civilisations, to the modern dependence on new technologies, the craft of clay making is commonly linked with the use of moulds, handmade creations, ceramic extruders, etc. (Schmandt and Besserat, 1977). Clay in the form of bricks is one of the oldest building materials known (Fernandes et al, 2010). This research expands the possibilities offered by standardised bricks by testing types of clay, forms, shapes, porosity, and structural methods. The traditional way of working with clay relies on human craftsmanship and is based on the use of semi-solid clay (Fernandes et al., 2010). However, there is little research on the use of clay slurry. With the rise of 3D printing systems in recent years, research and development has been emerging on using clay as a 3D printing filament (Gürsoy, 2018). Researchers have discovered that in order for 3D-printed clay slurry to solidify quickly to support the weight of the added layers during printing, curing agents such as lime, coal ash, cement, etc. have to be added to the clay slurry. After adding these substances, clay is difficult to be reused and can have a negative effect on the environment (Chen et al., 2021). In this study, a unique method for manufacturing clay elements of intricate geometries is proposed with the help of an internal skeleton that can be continuously reused. The study introduces the process of applying clay on a special structure through spraying and showcases how this method creates various opportunities for customisation of production.
keywords	Spray clay, Substructure, 3D printing, Modelling system, Reusable
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	caadria2018_086
id	caadria2018_086
authors	Castelo Branco, Renata and Leit?o, António
year	2018
title	Algorithmic Architectural Visualization
doi	https://doi.org/10.52842/conf.caadria.2018.2.557
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 557-566
summary	Digitally-generated visualizations, such as renders or movies, are, nowadays, commonly used as representation methods for architectural creations. This occurs not only in final stages of the process, with the goal of selling the product's image, but also in midst creation process to express concepts and ideas. Presently, the spread of parametric and algorithmic approaches to design creates a problem for visualization, as it enables the almost effortless change of 3D models, thus requiring repeated visualization efforts to keep up with the changes applied to the design. To solve this, we propose extending the algorithmic design approach to also include the high-level description of architectural image creation. The methodology, Algorithmic Architectural Visualization (AAV), also contemplates the required preparation settings for the visualization process, and includes possible visualization productions inspired by film techniques.
keywords	Algorithmic Design; Architectural Visualization; Render; Film Grammar
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2018_268
id	caadria2018_268
authors	Lim, Joie, Janssen, Patrick and Stouffs, Rudi
year	2018
title	Automated Generation of BIM Models from 2D CAD Drawings
doi	https://doi.org/10.52842/conf.caadria.2018.2.061
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 61-70
summary	Existing buildings are often lacking BIM models. This paper proposes a method to semi-automate the generation of BIM models from 2D CAD drawings. The method has two parts: the first part, 2D CAD drawing preparation, involves cleaning the drawings to obtain simplified 2D input geometry and the second, 3D BIM model generation, involves generating and extracting parameters to generate 3D BIM components. This research focuses on the semi-automation of the second part. The the model is generated storey by storey, with each building element type being processed. A demonstration was carried out for a case-study building. The main modelling strategies used by the method are described and key challenges are discussed.
keywords	BIM; CAD drawings; conversion; generation; Grasshopper
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2018_232
id	ecaade2018_232
authors	Al Bondakji, Louna, Chatzi, Anna-Maria, Heidari Tabar, Minoo, Wesseler, Lisa-Marie and Werner, Liss C.
year	2018
title	VR-visualization of High-dimensional Urban Data
doi	https://doi.org/10.52842/conf.ecaade.2018.2.773
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 773-780
summary	The project aims to investigate the possibility of VR in a combination of visualizing high-dimensional urban data. Our study proposes a data-based tool for urban planners, architects, and researchers to 3D visualize and experience an urban quarter. Users have a possibility to choose a specific part of a city according to urban data input like "buildings, streets, and landscapes". This data-based tool is based on an algorithm to translate data from Shapefiles (.sh) in a form of a virtual cube model. The tool can be scaled and hence applied globally. The goal of the study is to improve understanding of the connection and analysis of high-dimensional urban data beyond a two-dimensional static graph or three-dimensional image. Professionals may find an optimized condition between urban data through abstract simulation. By implementing this tool in the early design process, researchers have an opportunity to develop a new vision for extending and optimizing urban materials.
keywords	Abstract Urban Data Visualization; Virtual Reality; Geographical Information System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia18_312
id	acadia18_312
authors	Ariza, Inés; Mirjan, Ammar; Gandia, Augusto; Casas, Gonzalo; Cros, Samuel; Gramazio, Fabio; Kohler, Matthias.
year	2018
title	In Place Detailing. Combining 3D printing and robotic assembly
doi	https://doi.org/10.52842/conf.acadia.2018.312
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 312-321
summary	This research presents a novel construction method that links robotic assembly and in place 3D printing. Rather than producing custom joints in a separate prefabrication process, our approach enables creating highly customized connection details that are 3D printed directly onto off-the-shelf building members during their assembly process. Challenging the current fashion of highly predetermined joints in digital construction, detailing in place offers an adaptive fabrication method, enabling the expressive tailoring of connection details addressing its specific architectural conditions. In the present research, the in place detailing strategy is explored through robotic wire arc additive manufacturing (WAAM), a metal 3D printing technique based on MIG welding. The robotic WAAM process coupled with localization and path-planning strategies allows a local control of the detail geometry enabling the fabrication of customized welded connections that can compensate material and construction tolerances. The paper outlines the potential of 3D printing in place details, describes methods and techniques to realize them and shows experimental results that validate the approach.
keywords	work in progress, fabrication & robotics, robotic production, materials/adaptive systems, architectural detailing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	acadia18_276
id	acadia18_276
authors	Bilotti, Jeremy; Norman, Bennett; Rosenwasser, David; Leo Liu, Jingyang; Sabin, Jenny
year	2018
title	Robosense 2.0. Robotic sensing and architectural ceramic fabrication
doi	https://doi.org/10.52842/conf.acadia.2018.276
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 276-285
summary	Robosense 2.0: Robotic Sensing and Architectural Ceramic Fabrication demonstrates a generative design process based on collaboration between designers, robotic tools, advanced software, and nuanced material behavior. The project employs fabrication tools which are typically used in highly precise and predetermined applications, but uniquely thematizes the unpredictable aspects of these processes as applied to architectural component design. By integrating responsive sensing systems, this paper demonstrates real-time feedback loops which consider the spontaneous agency and intuition of the architect (or craftsperson) rather than the execution of static or predetermined designs. This paper includes new developments in robotics software for architectural design applications, ceramic-deposition 3D printing, sensing systems, materially-driven pattern design, and techniques with roots in the arts and crafts. Considering the increasing accessibility and advancement of 3D printing and robotic technologies, this project seeks to challenge the erasure of materiality: when mistakes or accidents caused by inconsistencies in natural material are avoided or intentionally hidden. Instead, the incorporation of material and user-input data yields designs which are imbued with more nuanced traces of making. This paper suggests the potential for architects and craftspeople to maintain a more direct and active relationship with the production of their designs.
keywords	full paper, fabrication & robotics, robotic production, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	acadia18_286
id	acadia18_286
authors	Claire Im, Hyeonji; AlOthman, Sulaiman; García del Castillo, Jose Luis
year	2018
title	Responsive Spatial Print. Clay 3D printing of spatial lattices using real-time model recalibration
doi	https://doi.org/10.52842/conf.acadia.2018.286
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 286-293
summary	Additive manufacturing processes are typically based on a horizontal discretization of solid geometry and layered deposition of materials, the speed and the rate of which are constant and determined by the stability criteria. New methods are being developed to enable three-dimensional printing of complex self-supporting lattices, expanding the range of possible outcomes in additive manufacturing. However, these processes introduce an increased degree of formal and material uncertainty, which require the development of solutions specific to each medium. This paper describes a development to the 3D printing methodology for clay, incorporating a closed-loop feedback system of material surveying and self-correction to recompute new depositions based on scanned local deviations from the digital model. This Responsive Spatial Print (RSP) method provides several improvements over the Spatial Print Trajectory (SPT) methodology for clay 3D printing of spatial lattices previously developed by the authors. This process compensates for the uncertain material behavior of clay due to its viscosity, malleability, and deflection through constant model recalibration, and it increases the predictability and the possible scale of spatial 3D prints through real-time material-informed toolpath generation. The RSP methodology and early successful results are presented along with new challenges to be addressed due to the increased scale of the possible outcomes.
keywords	work in progress, closed loop system, spatial clay printing, self-supporting lattice, in-situ printking, extrusion rate, material behavior
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	ecaade2018_433
id	ecaade2018_433
authors	Daher, Elie, Kubicki, Sylvain and Pak, Burak
year	2018
title	Participation-based Parametric Design in Early Stages - A participative design process for spatial planning in office building
doi	https://doi.org/10.52842/conf.ecaade.2018.1.429
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 429-438
summary	The term participation has been used to define different activities, such as civil debate, communication, consultation, delegation, self-help construction, political decisions. However, participation in design started from the idea that individuals whom being affected by a design project must contribute to the design process. Recently, designers have been moving closer to the future users and developing new ways to empower them to get involved in the design process. In this paper we rethink the way the early design process is developed in a participatory approach thanks to parametric methods. A use case is proposed showing the potential of parametric design methods to empower the participation of users in the design of their facilities. The use case is dealing in particular with the spatial planning of an office building where the users together with the spatial planning team are able to design the layout spatial configuration by 1) fixing the objectives, 2) manipulating the model, 3)modifying some parameters, 4) visualizing the iterations and evaluating in a real-time each solution in an interactive 3D environment and together with facility managers 5) choosing the configuration of the spatial layout.
keywords	Computational design; Participatory design; Optimization ; Parametric design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_344
id	ecaade2018_344
authors	El-Gewely, Noor, Wong, Christopher, Tayefi, Lili, Markopoulou, Areti, Chronis, Angelos and Dubor, Alexandre
year	2018
title	Programming Material Intelligence Using Food Waste Deposition to Trigger Automatic Three-Dimensional Formation Response in Bioplastics
doi	https://doi.org/10.52842/conf.ecaade.2018.2.271
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 271-278
summary	Bioplastics are by their very nature parametric materials, programmable through the selection of constituent components and the ratios in which they appear, and as such present significant potential as architectural building materials for reasons beyond sustainability and biodegradability. This paper presents a system through which rigid three-dimensional doubly curved hyperbolic paraboloid shapes are automatically formed from two-dimensional sheet casts by harnessing the inherent flexibility and expressiveness of bioplastics. The system uses a gelatin-based bioplastic supplemented with granular organic matter from food waste in conjunction with a split-frame casting system that enables the self-formation of three-dimensional geometries by directing the force of the bioplastic's uniform contraction as it dries. By adjusting the food waste added to the bioplastic, its properties can be tuned according to formal and performative needs; here, dehydrated granulated orange peel and dehydrated spent espresso-ground coffee are used both to impart their inherent characteristics and also to influence the degree of curvature of the resulting bioplastic surfaces. Multi-material casts incorporating both orange peel bioplastic and coffee grounds bioplastic are shown to exert a greater influence over the degree of curvature than either bioplastic alone, and skeletonized panels are shown to exhibit the same behavior as their solid counterparts. Potential developments of the technology so as to gain greater control of the curvature performance, particularly in the direction of computer-controlled additive manufacturing, are considered, as is the potential of application in architectural scale.
keywords	Bioplastics; Composites; Fabrication; Materials
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2018_104
id	ecaade2018_104
authors	Gürsoy, Benay
year	2018
title	From Control to Uncertainty in 3D Printing with Clay
doi	https://doi.org/10.52842/conf.ecaade.2018.2.021
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 21-30
summary	The use of digital fabrication tools can extend beyond the seamless materialization of the digital model and can continuously inform design ideation through emerging material qualities. Exploring the implications of an approach to digital fabrication that is not based on imposed and rigorous formalisms but on unique and contextual ones constitutes the research agenda. Within this framework, the focus of this paper is on 3D printing with clay. Considering matter not as the static and passive outcome of digitally predetermined form, but as a design generator, a case study on both the materials and tools employed in 3D printing with clay is presented.
keywords	Digital fabrication; additive manufacturing; 3D printing with clay; material computing; uncertainty
series	eCAADe
email
last changed	2022/06/07 07:49

_id	acadia18_232
id	acadia18_232
authors	Kilian, Axel
year	2018
title	The Flexing Room Architectural Robot. An Actuated Active-Bending Robotic Structure using Human Feedback
doi	https://doi.org/10.52842/conf.acadia.2018.232
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 232-241
summary	Advances in autonomous control of object-scale robots, both anthropomorphic and vehicular, are posing new human–machine interface challenges. In architecture, very few examples of autonomous inhabitable robotic architecture exist. A number of factors likely contribute to this condition, among them the scale and cost of architectural adaptive systems, but on a more fundamental conceptual level also the questions of how architectural robots would communicate with their human inhabitants. The Flexing Room installation is a room-sized actuated active-bending skeleton structure. It uses rudimentary social feedback by counting people to inform its behavior in the form of actuated poses of the room enclosure. An operational full-scale prototype was constructed and tested. To operate it no geometric-based simulation was used; the only communication between computer and structure was in sending values for the air pressure settings and in gathering sensor feedback. The structure’s physical state was resolved through the embodied computation of its interconnected parts, and the people-counting sensor feedback influences its next action. Future work will explore the development of learning processes to improve the human–machine coexistence in space.
keywords	full paper, fabrication & robotics, non-production robotics, materials/adaptive systems, flexible structures
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	acadia18_322
id	acadia18_322
authors	Klemmt, Christoph; Gheorghe, Andrei; Pantic, Igor; Hornung, Philipp; Sodhi, Rajat
year	2018
title	Engineering Design Tropisms. Utilization of a bamboo-resin joint for voxelized network geometries
doi	https://doi.org/10.52842/conf.acadia.2018.322
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 322-327
summary	We propose the combination of the traditional construction material bamboo with a novel epoxy-resin joint. The joint forms a bending-resisting connection that eliminates the need for diagonal members. This allows its utilization along rectangular grids as was tested with the design of a prototype structure that occupies a voxelized space. The design process used an agent-based simulation to mediate between design intent, site and structural considerations. The prototype was constructed with a robotic milling of the components and forms a successful application of the joints and design methodology.
keywords	work in progress, digital fabrication, digital materials, robotic production, fabrication & robotics
series	ACADIA
type	paper
email
last changed	2022/06/07 07:51

_id	ecaaderis2018_112
id	ecaaderis2018_112
authors	Kontovourkis, Odysseas and Konatzii, Panagiota
year	2018
title	Design-static analysis and environmental assessment investigation based on a kinetic formwork-driven by digital fabrication principles
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 131-140
keywords	This research focuses on design-static analysis and environmental assessment procedures that are based on the idea of a flexible kinetic formwork used as the automated mechanism for the production of bricks for porous wall structures. A key aspect of this investigation is the Life Cycle Assessment (LCA) analysis study that is applied in order to achieve, in parallel with the automated procedure, the sustainable potential of the products. For this purpose, the design and construction flexibility of the product is taken into account from the early design decision making stage by examining different sizes of bricks under fabrication including massive or porous ones in order to test their design and static performance, aiming to adapt their shape in multiple functional and environmental scenarios. In parallel, the LCA impact of the given design scenarios are taken into consideration, again from the early design phase, and include, among other objectives, material minimization, less environmental impact of building materials and less energy consumption based on the proposed digital fabrication technology. This is examined by comparing digital design and robotic automated results using three types of ecological materials.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	ecaade2018_108
id	ecaade2018_108
authors	Luo, Dan, Wang, Jingsong and Xu, Weiguo
year	2018
title	Applied Automatic Machine Learning Process for Material Computation
doi	https://doi.org/10.52842/conf.ecaade.2018.1.109
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 109-118
summary	Machine learning enables computers to learn without being explicitly programmed. This paper outlines state-of-the-art implementations of machine learning approaches to the study of physical material properties based on Elastomer we developed, which combines with robotic automation and image recognition to generate a computable material model for non-uniform linear Elastomer material. The development of the neural network includes a few preliminary experiments to confirm the feasibility and the influential parameters used to define the final RNN neural network, the study of the inputs and the quality of the testing samples influencing the accuracy of the output model, and the evaluation of the generated material model as well as the method itself. To conclude, this paper expands such methods to the possible architectural implications on other non-uniform materials, such as the performance of wood sheets with different grains and tensile material made from composite materials.
keywords	neural network; robotic; material computation; automation
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia18_434
id	acadia18_434
authors	Meibodi, Mania Aghaei ; Jipa, Andrei; Giesecke, Rena; Shammas, Demetris; Bernhard, Mathias; Leschok, Matthias; Graser, Konrad; Dillenburger, Benjamin
year	2018
title	Smart Slab. Computational design and digital fabrication of a lightweight concrete slab
doi	https://doi.org/10.52842/conf.acadia.2018.434
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 434-443
summary	This paper presents a computational design approach and novel digital fabrication method for an optimized lightweight concrete slab using a 3D-printed formwork. Smart Slab is the first concrete slab fabricated with a 3D-printed formwork. It is a lightweight concrete slab, displaying three-dimensional geometric differentiation on multiple scales. The optimization of slab systems can have a large impact on buildings: more compact slabs allow for more usable space within the same building volume, refined structural concepts allow for material reduction, and integrated prefabrication can reduce complexity on the construction site. Among the main challenges is that optimized slab geometries are difficult to fabricate in a conventional way because non-standard formworks are very costly. Novel digital fabrication methods such as additive manufacturing of concrete can provide a solution, but until now the material properties and the surface quality only allow for limited applications. The fabrication approach presented here therefore combines the geometric freedom of 3D binderjet printing of formworks with the structural performance of fiber reinforced concrete. Using 3D printing to fabricate sand formwork for concrete, enables the prefabrication of custom concrete slab elements with complex geometric features with great precision. In addition, space for building systems such as sprinklers and Lighting could be integrated in a compact way. The design of the slab is based on a holistic computational model which allows fast design optimization and adaptation, the integration of the planning of the building systems, and the coordination of the multiple fabrication processes involved with an export of all fabrication data. This paper describes the context, design drivers, and digital design process behind the Smart Slab, and then discusses the digital fabrication system used to produce it, focusing on the 3D-printed formwork. It shows that 3D printing is already an attractive alternative for custom formwork solutions, especially when strategically combined with other CNC fabrication methods. Note that smart slab is under construction and images of finished elements can be integrated within couple of weeks.
keywords	full paper, digital fabrication, computation, generative design, hybrid practices
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	acadia21_246
id	acadia21_246
authors	Safley, Nick
year	2021
title	Reconnecting...
doi	https://doi.org/10.52842/conf.acadia.2021.246
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 246-255.
summary	This design research reimagines the architectural detail in a postdigital framework and proposes digital methods to work upon discrete tectonics. Drawing upon Marco Frascari's writing The Tell-the-Tale Detail, the study aims to reimagine tectonic thinking for focused attention after the digital turn. Today, computational tools are powerful enough to perform operations more similar to physical tools than in the earlier digital era. These tools create a "digital materiality," where architects can manipulate digital information in parallel and overlapping ways to physical corollaries. (Abrons and Fure, 2018) To date, work in this area has focused on materiality specifically. This project reinterprets tectonics using texture map editing and point cloud information, particularly reconceptualizing jointing using images. Smartphone-based 3D digital scanning was used to captured details from a series of Carlo Scarpa's influential works, isolating these details from their physical sites and focusing attention upon individual tectonic moments. As digital scans, these details problematize the rhetoric of smoothness and seamlessness prevalent in digital architecture as they are discretely construed loci yet composed of digital meshes. (Jones 2014) Once removed from their contexts, reconnecting the digital scans into compositions of "compound details" necessitated a series of new mechanisms for constructing and construing not native to the material world. Using Photoshop editing of texture-mapped images, digital texturing of meshes, and interpretation of the initial material constructions, new joints within and between these the digital scanned details were created to reframe the original detail for the post-digital.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia18_250
id	acadia18_250
authors	Seibold, Zach; Grinham, Jonathan; Geletina, Olga; Ahanotu, Onyemaechi; Sayegh, Allen; Weaver, James; Bechthold, Martin
year	2018
title	Fluid Equilibrium: Material Computation in Ferrofluidic Castings
doi	https://doi.org/10.52842/conf.acadia.2018.250
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 250-259
summary	We present a computationally-based manufacturing process that allows for variable pattern casting through the use of ferrofluid – a mixture of suspended magnetic nanoparticles in a carrier liquid. The capacity of ferrofluid to form intricate spike and labyrinthine packing structures from ferrohydrodynamic instabilities is well recognized in industry and popular science. In this paper we employ these instabilities as a mold for the direct casting of rigid materials with complex periodic features. Furthermore, using a bitmap-based computational workflow and an array of high-strength neodymium magnets with linear staging, we demonstrate the ability to program the macro-scale pattern formation by modulating the magnetic field density within a single cast. Using this approach, it is possible to program specific patterns in the resulting cast tiles at both the micro- and macro-scale and thus generate tiled arrays with predictable halftone-like image features. We demonstrate the efficacy of this approach for a variety of materials typically used in the architecture, engineering, and construction industries (AEC) including epoxys, ceramics, and cements.
keywords	full paper, materials & adaptive systems, digital fabrication, digital materials, physics
series	ACADIA
type	paper
email
last changed	2022/06/07 08:00

_id	acadia18_350
id	acadia18_350
authors	Seibold, Zach; Hinz, Kevin; García del Castillo y López, Jose Luis; Martínez Alonso, Nono; Mhatre, Saurabh; Bechthold, Martin
year	2018
title	Ceramic Morphologies. Precision and control in paste-based additive manufacturing
doi	https://doi.org/10.52842/conf.acadia.2018.350
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 350-357
summary	Additive manufacturing techniques (AMT), commonly referred to as 3D printing, are emerging as a new area of study for the production of ceramic elements at the architectural scale. AMT may allow architectural designers to break from the established means of designing with ceramic elements – a process where designs are typically confined to a limited selection of building components produced by machine, die or fixture. In this paper, we report a method for the design and additive manufacture of customizable ceramic masonry elements via paste-based extrusion. A novel digital workflow allowed for precise control of part design, and generated manufacturing parameters such as toolpath geometry and machine code. 3D scans of a selection of elements provide an initial analysis of print fidelity. We discuss the current constraints of this process and identify several on-going research trajectories generated because of this research.
keywords	work in progress, fabrication & robotics, materials/adaptive systems, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:59

_id	acadia18_82
id	acadia18_82
authors	Sun, Chengyu; Zheng, Zhaohua; Sun, Tongyu
year	2018
title	Hybrid Fabrication. A free-form building process with high on-site flexibility and acceptable accumulative error
doi	https://doi.org/10.52842/conf.acadia.2018.082
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 82-87
summary	Although digital fabrication has a booming development in the building industry, especially in freeform building, its further application in onsite operations is still limited because of the huge flexibility required in programming. On the contrary, traditional manual fabrication onsite deals perfectly with problems that always accompany fatal accumulative errors in freeform building. This study explores a hybrid fabrication paradigm to take advantage of both in an onsite freeform building project, in which there is a cycling human–computer interactive process consisting of manual operation and computer guidance in real time. A Hololens-Kinect system in a framework of typical project camera systems is used in the demonstration. When human builders perceive, decide, and operate the irregular foam bricks in a complex onsite environment, the computer keeps updating the current form through 3D scanning and prompting the position and orientation of the next brick through augmented display. From a starting vault, the computer always fine tunes its control surface according to the gradually installed bricks and keeps following a catenary formula. Thus, the hybrid fabrication actually benefits from the flexibility based on human judgment and operation, and an acceptable level of accumulative error can be handled through computer guidance concerning the structural performance and formal accuracy.
keywords	work in progress, vr/ar/mr, hybrid practices
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	caadria2018_037
id	caadria2018_037
authors	Valitabar, Mahdi, Moghimi, Mahdi, Mahdavinejad, Mohammadjavad and Pilechiha, Peiman
year	2018
title	Design Optimum Responsive Façade Based on Visual Comfort and Energy Performance
doi	https://doi.org/10.52842/conf.caadria.2018.2.093
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 93-102
summary	Responsive Facades duo to continuously changes in climate conditions have an important role in reducing energy usage of buildings while providing higher level of visual comfort. This paper is a comparative study of responsive facades in a virtual format. Honeybee and Ladybug software were used for modeling and evaluating visual comfort as well as calculation of the energy consumption in a 3D model. It's a plug-in for grasshopper. This article's problem includes tow visual comfort criteria, DGP and illuminance. Various types of vertical and horizontal responsive facades were compared with a new form to achieve the optimal responsive façade. The results of research imply that with a few changes in secondary skin the new concept could slash energy use like common responsive facades while providing higher level of visual comfort. The important distinguishing point is the new concept from the same sample of responsive facades that is designed to pay more attention to the occupants' view connection with outside.
keywords	Responsive Facades; Architectural Design optimization; Visual comfort; Energy consumption
series	CAADRIA
email
last changed	2022/06/07 07:57

For more results click below: