Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 628

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2018_344
id	ecaade2018_344
authors	El-Gewely, Noor, Wong, Christopher, Tayefi, Lili, Markopoulou, Areti, Chronis, Angelos and Dubor, Alexandre
year	2018
title	Programming Material Intelligence Using Food Waste Deposition to Trigger Automatic Three-Dimensional Formation Response in Bioplastics
doi	https://doi.org/10.52842/conf.ecaade.2018.2.271
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 271-278
summary	Bioplastics are by their very nature parametric materials, programmable through the selection of constituent components and the ratios in which they appear, and as such present significant potential as architectural building materials for reasons beyond sustainability and biodegradability. This paper presents a system through which rigid three-dimensional doubly curved hyperbolic paraboloid shapes are automatically formed from two-dimensional sheet casts by harnessing the inherent flexibility and expressiveness of bioplastics. The system uses a gelatin-based bioplastic supplemented with granular organic matter from food waste in conjunction with a split-frame casting system that enables the self-formation of three-dimensional geometries by directing the force of the bioplastic's uniform contraction as it dries. By adjusting the food waste added to the bioplastic, its properties can be tuned according to formal and performative needs; here, dehydrated granulated orange peel and dehydrated spent espresso-ground coffee are used both to impart their inherent characteristics and also to influence the degree of curvature of the resulting bioplastic surfaces. Multi-material casts incorporating both orange peel bioplastic and coffee grounds bioplastic are shown to exert a greater influence over the degree of curvature than either bioplastic alone, and skeletonized panels are shown to exhibit the same behavior as their solid counterparts. Potential developments of the technology so as to gain greater control of the curvature performance, particularly in the direction of computer-controlled additive manufacturing, are considered, as is the potential of application in architectural scale.
keywords	Bioplastics; Composites; Fabrication; Materials
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2018_1872
id	sigradi2018_1872
authors	Teixeira Mendes, Leticia; da Silva Lima, Elton Cristovão; Griz, Cristiana
year	2018
title	The use of parametric modeling and rapid prototyping in teaching graphic expression
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 383-389
summary	The introduction of new technologies in design areas is due, in large part, to the rapid development of the computer industry. This new paradigm has created tools and creative possibilities in the routine of several professionals. The Graphic Expression Department is responsible for disciplines that include the knowledge of Graphical Geometry and different approaches to graphically represent projects from different areas of knowledge. Thus, the present experiment presents a possibility of updating the teaching of representation from the introduction of Shape Grammar and through digital tools, in particular, the use of parametric design, visual programming and rapid prototyping.
keywords	shape grammar; parametric design; graphic geometry; visual programming
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	sigradi2018_1389
id	sigradi2018_1389
authors	Capone, Mara; Lanzara, Emanuela
year	2018
title	Kerf bending: ruled double curved surfaces manufacturing
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 653-660
summary	Knowledge of geometric properties of surfaces is crucial for resolution of many manufacturing problems. Developability is an important feature of a surface that allows its manufacture from a flat "strip" of a "flexible" and "non-deformable" material. Digital fabrication technologies and parametric design tools, based on knowledge of geometry, are changing designer way to think. Our research in the field of non-developable surfaces fabrication move from paneling to "kerfing". This technique allows to transform a rigid material in a flexible one. The main problem to solve is how to cut the flat shape to obtain the design surface.
keywords	Non-developable surfaces; Developable surfaces; Shape grammar; Parametric design; Kerfing
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia18_206
id	acadia18_206
authors	Farahi, Behnaz
year	2018
title	HEART OF THE MATTER: Affective Computing in Fashion and Architecture
doi	https://doi.org/10.52842/conf.acadia.2018.206
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 206-215
summary	What if material interfaces could physically adapt to the user’s emotional state in order to develop a new affective interaction? By using emotional computing technologies to track facial expressions, material interfaces can help to regulate emotions. They can serve either as a tool for intelligence augmentation or as a means of leveraging an empathic relationship by developing an affective loop with the user. This paper explores how color- and shape-changing operations can be used as interactive design tools to convey emotional information, and is illustrated by two projects, one at the intimate scale of fashion and one at a more architectural scale. By engaging with design, art, psychology, and computer and material science, this paper envisions a world where material systems can detect the emotional responses of a user and reconfigure themselves in order to enter into a feedback loop with the user’s affective state and influence social interaction.
keywords	full paper, materials & adaptive systems, materials/adaptive systems, computation.
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	acadia18_294
id	acadia18_294
authors	Kieffer, Lynn; Nicholas, Paul
year	2018
title	Pneumatically Actuated Material. Exploration of the mophospace of an adaptable system of soft actuators
doi	https://doi.org/10.52842/conf.acadia.2018.294
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 294-301
summary	This research in progress investigates a design and fabrication method of an adaptable and programmable composite material in an embodied computation system. It develops a workflow for a behavior-based model, the exploration of the morpho-space associated with the combinatorial assembly and the actuation of soft elements. The aggregation of individually actuatable and soft units in a system creates a large potential regarding adaptability, flexibility and reconfigurability, through a non-rigid and non-mechanical system. The cells are developed through a process of prototyping on origami and auxetic pattern inspired soft robotic elements. Every soft cell is pneumatically actuated through a negative pressure environment. The computational simulation is informed by the prototyping process and its findings. The simulation-based design of such an assembled system allows prediction of the aggregated shape and outputs a sequencing table, describing the actuation status of every cell and can create a tool to communicate between material and computational system
keywords	work in progress,pneumatic actuation, adaptable soft material
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	caadria2018_324
id	caadria2018_324
authors	Mansoori, Maryam, Kalantar, Negar, Creasy, Terry and Rybkowski, Zofia
year	2018
title	Toward Adaptive Architectural Skins - Designing Temperature-Responsive Curvilinear Surfaces
doi	https://doi.org/10.52842/conf.caadria.2018.2.329
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 329-338
summary	This research investigated the possibility of creating adaptable and precise curvilinear surfaces through the deformation of flat wooden surfaces. A prototype design system was developed to accomplish this task. The goal was to take a commonly-used architectural material, which is valued for its environmental sustainability and its aesthetic qualities, and to re-conceptualize it for use in cutting-edge adaptive digital designs. We therefore sought to develop a way to create wooden surfaces that could predictably transform in response to environmental stimuli. We successfully developed and tested the reversible deformation of a wooden surface by laminating a shape-memory polymer onto a kerfed wooden plane. The composite obtains its responsiveness from the shape-memory polymer, and its curvature direction and structural stability from the kerfed wood. The composite is able to deform to a defined curvilinear surface when heated to 40-60 degrees Celsius, and then self-transform back to the original flat surface when cooled. In addition to demonstrating kinetic behavior for a wood-based composite, the prototype offers a practical technique that can be used by designers to create flexible, inexpensive fabrication and packaging strategies.
keywords	Environmental-Responsive Architecture; Shape Memory Polymer; Wood Fabrication; Continuous Curvilinear Surfaces
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2018_303
id	ecaade2018_303
authors	Werner, Liss C.
year	2018
title	Biological Computation of Physarum - From DLA to spatial adaptive Voronoi
doi	https://doi.org/10.52842/conf.ecaade.2018.2.531
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 531-536
summary	Physarum polycephalum, also called slime mold or myxamoeba, has started attracting the attention of those architects, urban designers, and scholars, who work in experimental trans- and flexi-disciplines between architecture, computer sciences, biology, art, cognitive sciences or soft matter; disciplines that build on cybernetic principles. Slime mold is regarded as a bio-computer with intelligence embedded in its physical mechanisms. In its plasmodium stage, the single cell organism shows geometric, morphological and cognitive principles potentially relevant for future complexity in human-machines-networks (HMN) in architecture and urban design. The parametric bio-blob presents itself as a geometrically regulated graph structure-morphologically adaptive, logistically smart. It indicates cognitive goal-driven navigation and the ability to externally memorize (like ants). Physarum communicates with its environment. The paper introduces physarum polycephalum in the context of 'digital architecture' as a biological computer for self-organizing 2D- to 4D-geometry generation.
keywords	generative geometry; bio-computation; Voronoi
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2018_316
id	caadria2018_316
authors	Yan, Chao, Zhang, Yunyu, Yuan, Philip F. and Yao, Jiawei
year	2018
title	Virtual Motion - Shifting Perspective as an Instrument for Geometrical Construction
doi	https://doi.org/10.52842/conf.caadria.2018.2.471
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 471-480
summary	From the invention of projection to the emergence of digital technology, there's a clear correspondences among the transformations of visual representation paradigm in art, the developments of design instrument in architecture, and the human perception of time/space. Base on the examination of this particular historical trajectory, this paper focuses the working mechanism of shifting perspective as an alternative design instrument to explore the possibility of embedding time and motion into static form in digital age. Firstly, the paper reviews how the shifting perspective was introduced to represent space in modern western painting and photography. Then based on the research on shifting perspective, the paper develops a design tool, which would be able to translate motion into the particular geometrical feature of a generated 3D object. In the end, the paper brings further discussions about the formal and spatial effects brought by this new tool, and its potential to incorporate the perceptive image of human being into design process.
keywords	Shape Study; Projective Geometry; Shifting Perspective; Motion; Time Dimension
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2018_138
id	ecaade2018_138
authors	Abdulmawla, Abdulmalik, Schneider, Sven, Bielik, Martin and Koenig, Reinhard
year	2018
title	Integrated Data Analysis for Parametric Design Environment - mineR: a Grasshopper plugin based on R
doi	https://doi.org/10.52842/conf.ecaade.2018.2.319
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 319-326
summary	In this paper we introduce mineR- a tool that integrates statistical data analysis inside the parametric design environment Grasshopper. We first discuss how the integration of statistical data analysis would improve the parametric modelling workflow. Then we present the statistical programming language R. Thereafter, we show how mineR is built to facilitate the use of R in the context of parametric modelling. Using two example cases, we demonstrate the potential of implementing mineR in the context of urban design and analysis. Finally, we discuss the results and possible further developments.
keywords	Statistical Data Analysis; Parametric Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2018_278
id	caadria2018_278
authors	Caetano, In?s, Ilunga, Guilherme, Belém, Catarina, Aguiar, Rita, Feist, Sofia, Bastos, Francisco and Leit?o, António
year	2018
title	Case Studies on the Integration of Algorithmic Design Processes in Traditional Design Workflows
doi	https://doi.org/10.52842/conf.caadria.2018.1.111
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 111-120
summary	Algorithmic design processes have enormous potential for architecture. Even though some large design offices have already incorporated such processes in their workflow, so far, these have not been seriously considered by the large majority of traditional small-scale studios. Nevertheless, as the integration of algorithmic techniques inside architectural studios does not require mastering programming skills, but rather taking advantage of a collaborative design process, small design studios are therefore able of using such strategies within their workflow. This paper discusses a series of challenges presented by one of these studios, where we had to integrate algorithmic design processes with the studio's traditional workflow.
keywords	Collaborative design; Algorithmic design; Design strategies; Design workflow processes
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2018_1749
id	sigradi2018_1749
authors	Canavezzi de Abreu, Sandro
year	2018
title	Hidra System(!) in the tension between Internet of Things and Virtual Reality: programming meta-objects
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 908-913
summary	We will characterize the relationship between Internet of Things (IOT) and Virtual Reality (VR) as the tension between analog and digital domains, organized by several interfaces specifically developed for this study, during de course Interactive Architecture at the Architecture School - UFMG. These interfaces, referred here as programmable meta-objects (MOPs), recombine themselves to form an environment where inputs and outputs of each MOP are made available to other networked MOPs through the Hydra System (!). These MOPs can have both a physical existence (object present in physical space) and a "virtual" existence (it exists in the Virtual Reality environment).
keywords	Virtual Reality; Internet of Things; Combinatorial; Meta-objects; Programmable
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2018_1363
id	sigradi2018_1363
authors	Chiarella, Mauro; Martini, Sebastian; Dalla Costa, Matías; Veizaga, Martín
year	2018
title	Makers experiences: Upcycling, interfaces and reactive devices in Industrial Design
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1220-1226
summary	The Maker culture emphasizes collaborative learning and distributed knowledge. Expands exponentially the multiplicity of resources and possible processes. Finding effective and efficient ways to use them to develop predictive models that focus decision-making towards performance-oriented designs is the new challenge. Through the application of didactic strategies of problem-based learning will analyze five experiences of the degree of Industrial Design, Course IMD, National University of the Littoral based on logic of personalized manufacturing, augmented graphic thinking and collective creation.
keywords	Crowthinking; Upcycling; Arduino; Visual programming
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaadesigradi2019_397
id	ecaadesigradi2019_397
authors	Cristie, Verina and Joyce, Sam Conrad
year	2019
title	'GHShot': a collaborative and distributed visual version control for Grasshopper parametric programming
doi	https://doi.org/10.52842/conf.ecaade.2019.3.035
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
summary	When working with parametric models, architects typically focus on using rather structuring them (Woodbury, 2010). As a result, increasing design complexity typically means a convoluted parametric model, amplifying known problems: 'hard to understand, modify, share and reuse' (Smith 2007; Davis 2011). This practice is in contrast with conventional software-programming where programmers are known to meticulously document and structure their code with versioning tool. In this paper, we argue that versioning tools could help to manage parametric modelling complexity, as it has been showing with software counterparts. Four key features of version control: committing, differentiating, branching, and merging, and how they could be implemented in a parametric design practice are discussed. Initial user test sessions with 5 student designers using GHShot Grasshopper version control plugin (Cristie and Joyce 2018, 2017) revealed that the plugin is useful to record and overview design progression, share model, and provide a fallback mechanism.
keywords	Version Control; Parametric Design; Collaborative Design; Design Exploration
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ecaade2018_347
id	ecaade2018_347
authors	Dokonal, Wolfgang
year	2018
title	Do Training Bikes Dream of Electric Cities ?
doi	https://doi.org/10.52842/conf.ecaade.2018.2.789
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 789-794
summary	Virtual reality (VR), Augmented Reality (AR) and Mixed Reality is making the headlines in the newspapers and magazines today. But unlike 25 years ago when the first VR rage started with the first Cave Automatic Virtual Environments (CAVE) infrastructures VR is now a technique that is available at very low costs.Especially the recent advances and developments in low cost VR hardware mainly the Head mounted displays (HMD), in particular those that use mobile phones but also the PC based systems like the Oculus Rift and the HTC Vive together with recent software developments allow this change. Naturally this is based on the interest of the Gaming Industry and the big players in the smartphone industry. But at the moment there are nearly no tools for architects available within these systems. In our point of view there is the big potential that these technologies can give new opportunities to architects and designers to use VR and AR as part of their design toolbox and not only as a presentation tool. For us this is the most important aspect. In our projects we therefore try to develop a workflow that can be easily used even without programming and scripting skills.
keywords	Virtual Reality; Interfaces
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ijac201816201
id	ijac201816201
authors	Harding, John and Cecilie Brandt-Olsen
year	2018
title	Biomorpher: Interactive evolution for parametric design
source	International Journal of Architectural Computing vol. 16 - no. 2, 144-163
summary	Combining graph-based parametric design with metaheuristic solvers has to date focused solely on performance-based criteria and solving clearly defined objectives. In this article, we outline a new method for combining a parametric modelling environment with an interactive Cluster-Orientated Genetic Algorithm. In addition to performance criteria, evolutionary design exploration can be guided through choice alone, with user motivation that cannot be easily defined. As well as numeric parameters forming a genotype, the evolution of whole parametric definitions is discussed through the use of genetic programming. Visualisation techniques that enable mixing small populations for interactive evolution with large populations for performance-based optimisation are discussed, with examples from both academia and industry showing a wide range of applications.
keywords	Design exploration, genetic programming, human–computer interaction, interactive genetic algorithms, k-means clustering, parametric design
series	journal
email
last changed	2019/08/07 14:03

_id	sigradi2018_1885
id	sigradi2018_1885
authors	Herrera, Pablo C.
year	2018
title	Artisans and Digital Craft in Latin America: The contribution of architects to their creativity and production
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1179-1186
summary	This research explores the work of a generation of Latin-American architects who use programming and fabrication with traditional artisans. In the 21st century, this scenario was empowered from experiences produced in Fab Labs and Makerspaces in the context of localisms. We look at how digital technologies improve their processes, focusing on creation, adapting to the new economy, strengthening the regional identity in the scene of globalized Design, when political discourse drives innovation and technology to its benefit. The main objective is to understand the coexistence of designers and traditional artisans, providing experiences that could strengthen the identity of design in the region.
keywords	Artisan, Digital Craft, Digital Fabrication, Latin America
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia18_156
id	acadia18_156
authors	Huang, Weixin; Zheng, Hao
year	2018
title	Architectural Drawings Recognition and Generation through Machine Learning
doi	https://doi.org/10.52842/conf.acadia.2018.156
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 156-165
summary	With the development of information technology, the ideas of programming and mass calculation were introduced into the design field, resulting in the growth of computer- aided design. With the idea of designing by data, we began to manipulate data directly, and interpret data through design works. Machine Learning as a decision making tool has been widely used in many fields. It can be used to analyze large amounts of data and predict future changes. Generative Adversarial Network (GAN) is a model framework in machine learning. It’s specially designed to learn and generate output data with similar or identical characteristics. Pix2pixHD is a modified version of GAN that learns image data in pairs and generates new images based on the input. The author applied pix2pixHD in recognizing and generating architectural drawings, marking rooms with different colors and then generating apartment plans through two convolutional neural networks. Next, in order to understand how these networks work, the author analyzed their framework, and provided an explanation of the three working principles of the networks, convolution layer, residual network layer and deconvolution layer. Lastly, in order to visualize the networks in architectural drawings, the author derived data from different layer and different training epochs, and visualized the findings as gray scale images. It was found that the features of the architectural plan drawings have been gradually learned and stored as parameters in the networks. As the networks get deeper and the training epoch increases, the features in the graph become more concise and clearer. This phenomenon may be inspiring in understanding the designing behavior of humans.
keywords	full paper, design study, generative design, ai + machine learning, ai & machine learning
series	ACADIA
type	paper
email
last changed	2022/06/07 07:49

_id	ecaade2018_w02
id	ecaade2018_w02
authors	Jabi, Wassim and Aish, Robert
year	2018
title	Non-manifold Topology for Architectural and Engineering Modelling
doi	https://doi.org/10.52842/conf.ecaade.2018.1.057
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 57-60
summary	Non-manifold topology (NMT) allows the user to construct light-weight conceptual spatial architectural models which define the overall enclosure and the internal cellular division within that enclosure. The objective of this workshop is to give participants hands-on opportunities with a new software library that we have been developing under a research grant from the Leverhulme Trust. On the first day, the concepts of non-manifold topology will be introduced, including non-regular modelling operations. On the second day, we will introduce two plug-ins, which have been interfaced to our NMT tools: a) building energy simulation using OpenStudio and EnergyPlus and b) structural analysis software.
keywords	Non-manifold topology; Visual data flow programming; Building performance simulation; Computational design
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2018_310
id	ecaade2018_310
authors	Jabi, Wassim, Aish, Robert, Lannon, Simon, Chatzivasileiadi, Aikaterini and Wardhana, Nicholas Mario
year	2018
title	Topologic - A toolkit for spatial and topological modelling
doi	https://doi.org/10.52842/conf.ecaade.2018.2.449
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 449-458
summary	This paper describes non-manifold topology (NMT) as it relates to the field of architecture and presents Topologic, an open-source software modelling library enabling hierarchical and topological representations of architectural spaces, buildings and artefacts through NMT. Topologic is designed as a core library and additional plugins to visual data flow programming (VDFP) software. The software architecture and class hierarchy are explained and two domain-specific demonstrative tools (TopologicEnergy and TopologicStructure) are presented to illustrate how third-party software developers could use Topologic to build their own solutions. The paper concludes with a reflection on the benefits and limitations of NMT in the design and simulation workflows and outlines future work.
keywords	Non-manifold topology; Visual data flow programming; Building performance simulation; Structural analysis; Computational design; Building information modelling
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2018_260
id	ecaade2018_260
authors	Kallegias, Alexandros
year	2018
title	Design by Computation - A material driven study
doi	https://doi.org/10.52842/conf.ecaade.2018.2.279
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 279-284
summary	The paper aims to address methods of creating a system for design through material studies that are employed as feedback on a computational digital model. The case study described in this paper is the output of an exploration that has investigated physical transformation, interaction and wood materiality over the period of two weeks of the international architecture programme AA Athens Visiting School in Greece. Real-time performative form-responsive methods based on bending and stretching have been developed and simulated in an open-source programming environment. The output of the simulation has been informed by the results of material tests that took place in parallel and have served as inputs for the fine-tuning of the simulation. Final conclusions were made possible from these explorations that enabled the fabrication of a prototype using wood veneer at one-to-one scale. From a pedagogical aspect, the research main focus is to improve the quality of architectural education by learning through making. This is made possible using advanced computational techniques and coupling them with material studies towards an integrated system for architectural prototypes within a limited time frame.
keywords	materiality; computation; 1:1 scale prototyping; simulation; fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: