Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 628

Reformat results as: short short into frame detailed detailed into frame

_id	acadia18_260
id	acadia18_260
authors	Tish, Daniel; Schork, Tim; McGee, Wes
year	2018
title	Topologically Optimized and Functionally Graded Cable Nets. New approaches through robotic additive manufacturing
doi	https://doi.org/10.52842/conf.acadia.2018.260
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 260-265
summary	Recent advancements in the realm of additive manufacturing technologies have made it possible to directly manufacture the complex geometries that are resultant from topological optimization and functionally graded material processes. Topological optimization processes are well understood and widely used within the realm of structural engineering and have been increasingly adopted in architectural design and research. However, there has been little research devoted to the topological optimization of cable nets and their fabrication through robotic additive manufacturing. This paper presents a design framework for the optimization of additively manufactured tensile cable nets that attempts to bridge between these two domains by reframing the scale of topological optimization processes. Instead of focusing solely on the topology optimization at the macro-scale of cable nets, this research develops a method to optimize the meso-scale topology and defines metamaterial units with different properties to be aggregated into a complex whole. This reorientation from the formal towards the material domain signals an engagement with morphogenetic modes of design that find formal expression through bottom-up material processes. In order to further investigate the emerging potentials of this reorientation, the presented method is validated through physical deformation tests, as well as applied to the design of a furniture-scale case study project realized through the use of robotic additive manufacturing of elastomeric materials
keywords	work in progress, materials & adaptive systems, robotic production, computation, flexible structures
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	acadia18_394
id	acadia18_394
authors	Adel, Arash; Thoma, Andreas; Helmreich, Matthias; Gramazio, Fabio; Kohler, Matthias
year	2018
title	Design of Robotically Fabricated Timber Frame Structures
doi	https://doi.org/10.52842/conf.acadia.2018.394
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 394-403
summary	This paper presents methods for designing nonstandard timber frame structures, which are enabled by cooperative multi-robotic fabrication at building-scale. In comparison to the current use of automated systems in the timber industry for the fabrication of plate-like timber frame components, this research relies on the ability of robotic arms to spatially assemble timber beams into bespoke timber frame modules. This paper investigates the following topics: 1) A suitable constructive system facilitating a just-in-time robotic fabrication process. 2) A set of assembly techniques enabling cooperative multi-robotic spatial assembly of bespoke timber frame modules, which rely on a man-machine collaborative scenario. 3) A computational design process, which integrates architectural requirements, fabrication constraints, and assembly logic. 4) Implementation of the research in the design and construction of a multi-story building, which validates the developed methods and highlights the architectural implications of this approach.
keywords	full paper, fabrication & robotics, generative design, computation, timber architecture
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	sigradi2018_1609
id	sigradi2018_1609
authors	Chia, Hsu Yi; Hsien, Hsu Pei
year	2018
title	The fabrication and application of parametric inflatable structure
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 684-689
summary	This study uses parametric design to optimize the process and application of the inflatable method. Inflatable design has advantages of light weight, integral forming, volume change, etc., but the manufacturing process often requires the development of molds, a large number of manual heat seals, etc. Inspired by the structure principle of amputated wing tube structure, coupled with the advantages of parameterization and digital tool heat sealing, The same material can be made at different tightness, because the tight design with different angles has more structural characteristics and bending properties, thereby generating more complex spatial structures. Different materials also have corresponding manufacturing methods, which also increase the opportunities for application in architectural design.
keywords	Robotic arms fabrication; Inflatable Shape-change; pneumatic; bending mechanism; pavilion design;
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2018_008
id	caadria2018_008
authors	Crolla, Kristof, Cheng, Paul Hung Hon, Chan, Ding Yuen Shan, Chan, Arthur Ngo Foon and Lau, Darwin
year	2018
title	Inflatable Architecture Production with Cable-Driven Robots
doi	https://doi.org/10.52842/conf.caadria.2018.1.009
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 9-18
summary	This paper argues for alternative methods for the in-situ integration of robotics in architectural construction. Rather than promoting off-site pre-fabrication through industrial robot applications, it advocates for suspended, light-weight, cable-driven robots that allow flexible and safe onsite implementation. This paper uses the topic of large-scale inflatable architectural realisation as a study case to test the application of such a robot, here with a laser-cutter as end-effecter. This preliminary study covers the design, development, prototyping, and practical testing of an inherently scale-less cable-driven laser-cutter setup. This setup allows for the non-size specific cutting of inflatable structures' components which can be designed with common physics simulation engines. The developed robotic proof of concept forms the basis for several further and future study possibilities that merge the field of architectural design and implementation with mechanical and automation engineering.
keywords	Cable-driven robots; In-situ robotic fabrication; Large-scale fabrication; Inflatable architecture; Cross-disciplinarily
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	acadia18_98
id	acadia18_98
authors	Fox, Michael; Schulitz, Marc; Gershfeld, Mikhail; Cohen, Marc
year	2018
title	Full Integration: Closing the Gap on Technology Readiness
doi	https://doi.org/10.52842/conf.acadia.2018.098
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 98-107
summary	This paper discusses the authors’ experiences and lessons learned through designing and constructing small- and large-scale robotic prototypes and the fully integrated use of VR and AR for design. Also of focus here are the methodological tools utilized to implement this student-led research in an interdisciplinary educational environment, as well as the design explorations of Mars habitation systems. Through the systems engineering approach, students will generate ideas that may or may not make it to the final design development stage, but may potentially be valuable to future real exploration habitats and mission architectures. The final prototype allows an assessment of the focus parameters, which are the vessels’ transformation capacities and layout adaption. The design objective of this project is to examine strategies for commonality between an interplanetary vehicle (IPV) and a Mars surface habitat. The presented design proposals address this challenge to create a common habitation system in both habitats so that crew members will be familiar with the layout, function, and location throughout the expedition. The design tools operate at the intersection of architectural layout design, mechanics, and structural design, and use origami folding techniques and structural form-finding concepts to generate shell action rigidity. In addition, the project develops a strategy for mobility and transformation of the surface habitat prior to its transformed configuration. The value here lies in understanding lessons from this strategy for both the design process as well as efficiency and optimization in design as a model for terrestrial design.
keywords	full paper, bim, flexible structures, performance + simulation, representation + perception, building technologies, vr/ar/mr
series	ACADIA
type	paper
email
last changed	2022/06/07 07:50

_id	acadia18_232
id	acadia18_232
authors	Kilian, Axel
year	2018
title	The Flexing Room Architectural Robot. An Actuated Active-Bending Robotic Structure using Human Feedback
doi	https://doi.org/10.52842/conf.acadia.2018.232
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 232-241
summary	Advances in autonomous control of object-scale robots, both anthropomorphic and vehicular, are posing new human–machine interface challenges. In architecture, very few examples of autonomous inhabitable robotic architecture exist. A number of factors likely contribute to this condition, among them the scale and cost of architectural adaptive systems, but on a more fundamental conceptual level also the questions of how architectural robots would communicate with their human inhabitants. The Flexing Room installation is a room-sized actuated active-bending skeleton structure. It uses rudimentary social feedback by counting people to inform its behavior in the form of actuated poses of the room enclosure. An operational full-scale prototype was constructed and tested. To operate it no geometric-based simulation was used; the only communication between computer and structure was in sending values for the air pressure settings and in gathering sensor feedback. The structure’s physical state was resolved through the embodied computation of its interconnected parts, and the people-counting sensor feedback influences its next action. Future work will explore the development of learning processes to improve the human–machine coexistence in space.
keywords	full paper, fabrication & robotics, non-production robotics, materials/adaptive systems, flexible structures
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	acadia18_414
id	acadia18_414
authors	Marcus, Adam; Ikeda, Margaret; Jones, Evan; Metcalf, Taylor; Oliver, John; Hammerstrom, Kamille; Gossard, Daniel
year	2018
title	Buoyant Ecologies Float Lab. Optimized upside-down benthos for sea level rise adaptation
doi	https://doi.org/10.52842/conf.acadia.2018.414
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 414-423
summary	This paper describes the Buoyant Ecologies project, an ongoing research collaboration between architects, marine ecologists, and manufacturers focused on developing integrated architectural, ecological, and material responses to climate change and sea level rise. The research employs techniques of design computation and robotic fabrication to develop an approach to coastal resilience that is rooted in material performance as it relates to marine habitats. The project explores the design and production of highly performative fiber-reinforced polymer substrates that interact productively with the underwater ecosystem to promote multi-scalar habitats for invertebrate animals, encouraging ecological diversity and serving as wave-attenuating structures that mitigate coastal erosion. In this regard, the research leverages computational workflows of modeling, simulation, and fabrication to interface between human and nonhuman species in a way that benefits the broader ecosystem. The paper discusses an iterative prototyping process that has led to the design and construction of the Float Lab, a larger-scale prototype of a floating breakwater.
keywords	full paper, materials & adaptive systems, performance + simulation, digital fabrication, collaboration
series	ACADIA
type	paper
email
last changed	2022/06/07 07:59

_id	acadia20_340
id	acadia20_340
authors	Soana, Valentina; Stedman, Harvey; Darekar, Durgesh; M. Pawar, Vijay; Stuart-Smith, Robert
year	2020
title	ELAbot
doi	https://doi.org/10.52842/conf.acadia.2020.1.340
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 340-349.
summary	This paper presents the design, control system, and elastic behavior of ELAbot: a robotic bending active textile hybrid (BATH) structure that can self-form and transform. In BATH structures, equilibrium emerges from interaction between tensile (form active) and elastically bent (bending active) elements (Ahlquist and Menges 2013; Lienhard et al. 2012). The integration of a BATH structure with a robotic actuation system that controls global deformations enables the structure to self-deploy and achieve multiple three-dimensional states. Continuous elastic material actuation is embedded within an adaptive cyber-physical network, creating a novel robotic architectural system capable of behaving autonomously. State-of-the-art BATH research demonstrates their structural efficiency, aesthetic qualities, and potential for use in innovative architectural structures (Suzuki and Knippers 2018). Due to the lack of appropriate motor-control strategies that exert dynamic loading deformations safely over time, research in this field has focused predominantly on static structures. Given the complexity of controlling the material behavior of nonlinear kinetic elastic systems at an architectural scale, this research focuses on the development of a cyber-physical design framework where physical elastic behavior is integrated into a computational design process, allowing the control of large deformations. This enables the system to respond to conditions that could be difficult to predict in advance and to adapt to multiple circumstances. Within this framework, control values are computed through continuous negotiation between exteroceptive and interoceptive information, and user/designer interaction.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	acadia18_312
id	acadia18_312
authors	Ariza, Inés; Mirjan, Ammar; Gandia, Augusto; Casas, Gonzalo; Cros, Samuel; Gramazio, Fabio; Kohler, Matthias.
year	2018
title	In Place Detailing. Combining 3D printing and robotic assembly
doi	https://doi.org/10.52842/conf.acadia.2018.312
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 312-321
summary	This research presents a novel construction method that links robotic assembly and in place 3D printing. Rather than producing custom joints in a separate prefabrication process, our approach enables creating highly customized connection details that are 3D printed directly onto off-the-shelf building members during their assembly process. Challenging the current fashion of highly predetermined joints in digital construction, detailing in place offers an adaptive fabrication method, enabling the expressive tailoring of connection details addressing its specific architectural conditions. In the present research, the in place detailing strategy is explored through robotic wire arc additive manufacturing (WAAM), a metal 3D printing technique based on MIG welding. The robotic WAAM process coupled with localization and path-planning strategies allows a local control of the detail geometry enabling the fabrication of customized welded connections that can compensate material and construction tolerances. The paper outlines the potential of 3D printing in place details, describes methods and techniques to realize them and shows experimental results that validate the approach.
keywords	work in progress, fabrication & robotics, robotic production, materials/adaptive systems, architectural detailing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	acadia23_v1_196
id	acadia23_v1_196
authors	Bao, Ding Wen; Yan, Xin; Min Xie, Yi
year	2023
title	Intelligent Form
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 196-201.
summary	InterLoop employs previously developed workflows that enable multi-planar robotic bending of metal tubes with high accuracy and repeatability (Huang and Spaw 2022). The scale and complexity is managed by employing augmented reality (AR) technology in two capacities, fabrication and assembly (Jahn et al. 2018; Jahn, Newnham, and Berg 2022). The AR display overlays part numbers, bending sequences, expected geometry, and robot movements in real time as the robot fabrication is occurring. For assembly purposes, part numbers, centerlines, and their expected positional relationships are projected via quick response (QR) codes spatially tracked by the Microsoft Hololens 2 (Microsoft 2019). This is crucial due to the length and self-similarity of complex multi-planar parts that make them difficult to distinguish and orient correctly. Leveraging augmented reality technology and robotic fabrication uncovers a novel material expression in tubular structures with bundles, knots, and interweaving (Figure 1).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaadesigradi2019_425
id	ecaadesigradi2019_425
authors	Betti, Giovanni, Aziz, Saqib and Ron, Gili
year	2019
title	Pop Up Factory : Collaborative Design in Mixed Rality - Interactive live installation for the makeCity festival, 2018 Berlin
doi	https://doi.org/10.52842/conf.ecaade.2019.3.115
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 115-124
summary	This paper examines a novel, integrated and collaborative approach to design and fabrication, enabled through Mixed Reality. In a bespoke fabrication process, the design is controlled and altered by users in holographic space, through a custom, multi-modal interface. Users input is live-streamed and channeled to 3D modelling environment,on-demand robotic fabrication and AR-guided assembly. The Holographic Interface is aimed at promoting man-machine collaboration. A bespoke pipeline translates hand gestures and audio into CAD and numeric fabrication. This enables non-professional participants engage with a plethora of novel technology. The feasibility of Mixed Reality for architectural workflow was tested through an interactive installation for the makeCity Berlin 2018 festival. Participants experienced with on-demand design, fabrication an AR-guided assembly. This article will discuss the technical measures taken as well as the potential in using Holographic Interfaces for collaborative design and on-site fabrication.Please write your abstract here by clicking this paragraph.
keywords	Holographic Interface; Augmented Reality; Multimodal Interface; Collaborative Design; Robotic Fabrication; On-Site Fabrication
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	acadia18_276
id	acadia18_276
authors	Bilotti, Jeremy; Norman, Bennett; Rosenwasser, David; Leo Liu, Jingyang; Sabin, Jenny
year	2018
title	Robosense 2.0. Robotic sensing and architectural ceramic fabrication
doi	https://doi.org/10.52842/conf.acadia.2018.276
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 276-285
summary	Robosense 2.0: Robotic Sensing and Architectural Ceramic Fabrication demonstrates a generative design process based on collaboration between designers, robotic tools, advanced software, and nuanced material behavior. The project employs fabrication tools which are typically used in highly precise and predetermined applications, but uniquely thematizes the unpredictable aspects of these processes as applied to architectural component design. By integrating responsive sensing systems, this paper demonstrates real-time feedback loops which consider the spontaneous agency and intuition of the architect (or craftsperson) rather than the execution of static or predetermined designs. This paper includes new developments in robotics software for architectural design applications, ceramic-deposition 3D printing, sensing systems, materially-driven pattern design, and techniques with roots in the arts and crafts. Considering the increasing accessibility and advancement of 3D printing and robotic technologies, this project seeks to challenge the erasure of materiality: when mistakes or accidents caused by inconsistencies in natural material are avoided or intentionally hidden. Instead, the incorporation of material and user-input data yields designs which are imbued with more nuanced traces of making. This paper suggests the potential for architects and craftspeople to maintain a more direct and active relationship with the production of their designs.
keywords	full paper, fabrication & robotics, robotic production, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ijac201816401
id	ijac201816401
authors	Doyle, Shelby and Nick Senske
year	2018
title	Digital provenance and material metadata: Attribution and co-authorship in the age of artificial intelligence
source	International Journal of Architectural Computing vol. 16 - no. 4, 271-280
summary	This speculative essay examines a single drawing, produced in a collaboration between the authors and a Turtle robot, in a search for methods to evaluate and document provenance in artificial intelligence and robotic design. Reflecting upon the layers of authorship in our case study reveals the complex relationship that already exists between human and machine collaborators. In response to this unseen provenance, we propose new modes to document the full range of creative contribution to the design and production of artifacts from intellectual inputs to digital representations to physical labor. A more comprehensive system for artificial intelligence/robotic attribution could produce counter- narratives to technological development which more fully acknowledge the contributions of both humans and machines. As artificially intelligent design technologies distinguish themselves with distinct capabilities and eventual autonomy, a system of embedded attribution becomes the basis for human–machine collaboration, indeterminacy, and unexpected new applications for existing tools and methods.
keywords	Artificial intelligence, robotics, metadata, attribution, co-authorship, ethics
series	journal
email
last changed	2019/08/07 14:04

_id	ecaade2018_314
id	ecaade2018_314
authors	Gheorghe, Andrei, Hornung, Philipp, Reiss, Sigurd and Vierlinger, Robert
year	2018
title	Architecture Challenge 16 - Robotic Contouring - Researching Robotic Bending of Straight Profile Plastic Beams for Full Scale Production
doi	https://doi.org/10.52842/conf.ecaade.2018.1.165
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 165-172
summary	This paper provides insight into a new robotic plastic forming process through the prototypical construction of a full scale structure. The process explored the potential development of an automated setup, which utilizes robotic movement to create three-dimensional components from straight profile plastic beams. Polyethylene beams with a rectangular profile were bent with the help of an infrared heating ring and a 6 axis robotic arm. The digital process with custom-created Rhino/Grasshopper components allows the creation of forms with a high degree of customization in relation to the needed construction time, therefore providing for a highly flexible and quickly developable structural formwork without the need of a mold.
keywords	plastic beams forming; 6 axis robotic fabrication; profile contouring; computational optimization; structural formwork; light weight structures
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia23_v1_180
id	acadia23_v1_180
authors	Huang, Lee-Su; Spaw, Gregory
year	2023
title	InterLoop
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 180-187.
summary	InterLoop employs previously developed workflows that enable multi-planar robotic bending of metal tubes with high accuracy and repeatability (Huang and Spaw 2022). The scale and complexity is managed by employing augmented reality (AR) technology in two capacities, fabrication and assembly (Jahn et al. 2018; Jahn, Newnham, and Berg 2022). The AR display overlays part numbers, bending sequences, expected geometry, and robot movements in real time as the robot fabrication is occurring. For assembly purposes, part numbers, centerlines, and their expected positional relationships are projected via quick response (QR) codes spatially tracked by the Microsoft Hololens 2 (Microsoft 2019). This is crucial due to the length and self-similarity of complex multi-planar parts that make them difficult to distinguish and orient correctly. Leveraging augmented reality technology and robotic fabrication uncovers a novel material expression in tubular structures with bundles, knots, and interweaving (Figure 1).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	acadia18_126
id	acadia18_126
authors	Johns, Ryan Luke; Anderson, Jeffrey
year	2018
title	Interfaces for Adaptive Assembly
doi	https://doi.org/10.52842/conf.acadia.2018.126
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 126-135
summary	While robotic tools have greatly expanded the scope of computational control and design freedom in architectural assembly, the vast majority of projects involving robotic customization depend on standardized, mass produced components. By relinquishing some design agency to automated systems which respond to on-site material variations, it is possible to produce methods of construction which rely on locally-sourced components with low embodied energy. Such adaptive automation can provide resource efficiency and the aesthetic advantages of natural or reclaimed materials, but can also beget technical challenges of increasing complexity. By expanding design goals to incorporate intuitive collaborative interfaces, technical gaps can be understood even by non-experts, and leveraged towards new forms of creative expression. This paper presents the results of an interactive installation in which visitors can provide any variety of objects to a collaborative robotic manipulator (UR5) which recognizes part geometry and attempts to construct a dry-stacked wall from the material offerings. A visual and auditory interface provides suggestions and error messages to participants to facilitate an understanding of the acceptable material morphologies which can be used within the constraints of the system.
keywords	full paper, materials & adaptive systems, non-production robotics, digital materials, representation + perception
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	caadria2018_025
id	caadria2018_025
authors	Khoo, Chin Koi, Wang, Rui, Globa, Anastasia and Moloney, Jules
year	2018
title	Prototyping a Human-Building Interface with Multiple Mobile Robots
doi	https://doi.org/10.52842/conf.caadria.2018.1.525
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 525-534
summary	Recent advances in miniature mobile robotic research have generated possibilities and potentials in a range of fields such as the military, rescue operations, logistics and education. Within architecture, especially in responsive architecture and architectural interface disciplines, there has been minimal uptake of this technology, and so its full potential and implications have not been fully explored. In this paper, we propose a design exploration of a human-building interface (HBI) with multiple mobile robots serving as 'physical pixels', which investigates the latent possibilities of public interactive displays and media screens, potentially provoking interaction with existing built environments. The outcomes of this paper include an early-stage design study of an HBI prototype, PixelFace, which has been developed with multiple spherical mobile robots and an existing building structure. An early physical implementation of the HBI as an interactive public display with real-time physical movement that encourages playful interaction is also included.
keywords	Human-Computer Interaction; Human-Building Interface; Mobile Robots; Responsive Architecture
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaaderis2018_112
id	ecaaderis2018_112
authors	Kontovourkis, Odysseas and Konatzii, Panagiota
year	2018
title	Design-static analysis and environmental assessment investigation based on a kinetic formwork-driven by digital fabrication principles
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 131-140
keywords	This research focuses on design-static analysis and environmental assessment procedures that are based on the idea of a flexible kinetic formwork used as the automated mechanism for the production of bricks for porous wall structures. A key aspect of this investigation is the Life Cycle Assessment (LCA) analysis study that is applied in order to achieve, in parallel with the automated procedure, the sustainable potential of the products. For this purpose, the design and construction flexibility of the product is taken into account from the early design decision making stage by examining different sizes of bricks under fabrication including massive or porous ones in order to test their design and static performance, aiming to adapt their shape in multiple functional and environmental scenarios. In parallel, the LCA impact of the given design scenarios are taken into consideration, again from the early design phase, and include, among other objectives, material minimization, less environmental impact of building materials and less energy consumption based on the proposed digital fabrication technology. This is examined by comparing digital design and robotic automated results using three types of ecological materials.
series	eCAADe
email
last changed	2018/05/29 14:33

For more results click below: