Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 507

Reformat results as: short short into frame detailed detailed into frame

_id	acadia18_394
id	acadia18_394
authors	Adel, Arash; Thoma, Andreas; Helmreich, Matthias; Gramazio, Fabio; Kohler, Matthias
year	2018
title	Design of Robotically Fabricated Timber Frame Structures
doi	https://doi.org/10.52842/conf.acadia.2018.394
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 394-403
summary	This paper presents methods for designing nonstandard timber frame structures, which are enabled by cooperative multi-robotic fabrication at building-scale. In comparison to the current use of automated systems in the timber industry for the fabrication of plate-like timber frame components, this research relies on the ability of robotic arms to spatially assemble timber beams into bespoke timber frame modules. This paper investigates the following topics: 1) A suitable constructive system facilitating a just-in-time robotic fabrication process. 2) A set of assembly techniques enabling cooperative multi-robotic spatial assembly of bespoke timber frame modules, which rely on a man-machine collaborative scenario. 3) A computational design process, which integrates architectural requirements, fabrication constraints, and assembly logic. 4) Implementation of the research in the design and construction of a multi-story building, which validates the developed methods and highlights the architectural implications of this approach.
keywords	full paper, fabrication & robotics, generative design, computation, timber architecture
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	acadia18_216
id	acadia18_216
authors	Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year	2018
title	Catoptric Surface
doi	https://doi.org/10.52842/conf.acadia.2018.216
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
summary	The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords	full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	sigradi2018_1277
id	sigradi2018_1277
authors	Alani, Mostafa
year	2018
title	Heritage at Stake: Computational Design Processes for Rescuing Mosul’s Architectural Identity
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 165-169
summary	A generative algorithm for exploring the virtual design space of historic houses in the city of Mosul is presented. The method aims to progressively engage the spatial organization of traditional houses through investigating existing examples.
keywords	Traditional Mosul houses; Generative design; Shape grammar; Computation
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_w08
id	ecaade2018_w08
authors	Aºut, Serdar, Gouwetor, Friso and Latka, Jerzy
year	2018
title	Form-Adapt - Using Adaptable Form-work for Fabricating Double-Curved Surfaces
doi	https://doi.org/10.52842/conf.ecaade.2018.1.047
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 47-48
summary	This workshop will introduce the use of FlexiMold, an adaptable form-work device for fabricating double-curved surfaces; and Marionette, the parametric design tool of Vectorworks. The participants will have the opportunity to experience the entire workflow from the design to the production of a spatial object which has a complex form. The object will be composed of separate panels each of which will be designed by a participant and will be fabricated by team work.
keywords	Computational Design; Computer Aided Manufacturing; Double-Curved Surfaces
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaade2018_227
id	ecaade2018_227
authors	Chatzitsakyris, Panagiotis
year	2018
title	EventMode - A new computational design tool for integrating human activity data within the architectural design workflow
doi	https://doi.org/10.52842/conf.ecaade.2018.1.649
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 649-656
summary	Architectural designers are currently depending on a multitude of elaborate computational tools in order to explore, manipulate and visualize the geometric form of their building projects. However, if architecture can be perceived as the manipulation of geometric form in direct relation to human activities and events that take place inside it, then it is evident that such design parameters are not sufficiently represented in the currently available modeling software. Would it be possible to introduce the human activity element in the aforementioned computational tools in a way that informs the design process and improves the final building product? This paper attempts to answer this question by introducing a new experimental design tool that enables the creation of parametric human activity envelopes within three-dimensional digital models. The novel approach is that this tool enables the parametric interaction of these components with the actual building geometry and generates novel visual and data representations of the 3D model. The goal is to improve the decision-making process of architects as well as their clients by enabling them to evaluate and iterate their designs based not only on the building's form but also on the human spatial events that take place inside it. A prototype implementation demonstrates the tool's practical application through three design examples.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia18_386
id	acadia18_386
authors	Chen, Canhui; Burry, Jane
year	2018
title	(Re)calibrating Construction Simplicity and Design Complexity
doi	https://doi.org/10.52842/conf.acadia.2018.386
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 386-393
summary	Construction simplicity is crucial to cost control, however design complexity is often necessary in order to meet particular spatial performance criteria. This paper presents a case study of a semi-enclosed meeting pod that has a brief that must contend with the seemingly contradictory conditions of the necessary geometric complexities imperative to improved acoustic performance and cost control in construction. A series of deep oculi are introduced as architectural elements to link the pod interior to the outside environment. Their reveals also introduce sound reflection and scattering, which contribute to the main acoustic goal of improved speech privacy. Represented as a three-dimensional funnel like shape, the reveal to each opening is unique in size, depth and angle. Traditionally, the manufacturing of such bespoke architectural elements in many cases resulted in lengthy and costly manufacturing processes. This paper investigates how the complex oculi shape variations can be manufactured using one universal mold. A workflow using mathematical and computational operations, a standardized fabrication approach and customization through tooling results in a high precision digital process to create particular calculated geometries, recalibrated at each stage to account for the paradoxical inexactitudes and inevitable tolerances.
keywords	work in progress,tolerance, developable surface, form finding, construction simplicity, material behavior
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	sigradi2018_1609
id	sigradi2018_1609
authors	Chia, Hsu Yi; Hsien, Hsu Pei
year	2018
title	The fabrication and application of parametric inflatable structure
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 684-689
summary	This study uses parametric design to optimize the process and application of the inflatable method. Inflatable design has advantages of light weight, integral forming, volume change, etc., but the manufacturing process often requires the development of molds, a large number of manual heat seals, etc. Inspired by the structure principle of amputated wing tube structure, coupled with the advantages of parameterization and digital tool heat sealing, The same material can be made at different tightness, because the tight design with different angles has more structural characteristics and bending properties, thereby generating more complex spatial structures. Different materials also have corresponding manufacturing methods, which also increase the opportunities for application in architectural design.
keywords	Robotic arms fabrication; Inflatable Shape-change; pneumatic; bending mechanism; pavilion design;
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia18_286
id	acadia18_286
authors	Claire Im, Hyeonji; AlOthman, Sulaiman; García del Castillo, Jose Luis
year	2018
title	Responsive Spatial Print. Clay 3D printing of spatial lattices using real-time model recalibration
doi	https://doi.org/10.52842/conf.acadia.2018.286
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 286-293
summary	Additive manufacturing processes are typically based on a horizontal discretization of solid geometry and layered deposition of materials, the speed and the rate of which are constant and determined by the stability criteria. New methods are being developed to enable three-dimensional printing of complex self-supporting lattices, expanding the range of possible outcomes in additive manufacturing. However, these processes introduce an increased degree of formal and material uncertainty, which require the development of solutions specific to each medium. This paper describes a development to the 3D printing methodology for clay, incorporating a closed-loop feedback system of material surveying and self-correction to recompute new depositions based on scanned local deviations from the digital model. This Responsive Spatial Print (RSP) method provides several improvements over the Spatial Print Trajectory (SPT) methodology for clay 3D printing of spatial lattices previously developed by the authors. This process compensates for the uncertain material behavior of clay due to its viscosity, malleability, and deflection through constant model recalibration, and it increases the predictability and the possible scale of spatial 3D prints through real-time material-informed toolpath generation. The RSP methodology and early successful results are presented along with new challenges to be addressed due to the increased scale of the possible outcomes.
keywords	work in progress, closed loop system, spatial clay printing, self-supporting lattice, in-situ printking, extrusion rate, material behavior
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	ecaade2018_139
id	ecaade2018_139
authors	Cudzik, Jan and Radziszewski, Kacper
year	2018
title	Artificial Intelligence Aided Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2018.1.077
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 77-84
summary	Tools and methods used by architects always had an impact on the way building were designed. With the change in design methods and new approaches towards creation process, they became more than ever before crucial elements of the creation process. The automation of architects work has started with computational functions that were introduced to traditional computer-aided design tools. Nowadays architects tend to use specified tools that suit their specific needs. In some cases, they use artificial intelligence. Despite many similarities, they have different advantages and disadvantages. Therefore the change in the design process is more visible and unseen before solution are brought in the discipline. The article presents methods of applying the selected artificial intelligence algorithms: swarm intelligence, neural networks and evolutionary algorithms in the architectural practice by authors. Additionally research shows the methods of analogue data input and output approaches, based on vision and robotics, which in future combined with intelligence based algorithms, might simplify architects everyday practice. Presented techniques allow new spatial solutions to emerge with relatively simple intelligent based algorithms, from which many could be only accomplished with dedicated software. Popularization of the following methods among architects, will result in more intuitive, general use design tools.
keywords	computer aideed design; artificial intelligence,; evolutionary algorithms; swarm behaviour; optimization; parametric design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_433
id	ecaade2018_433
authors	Daher, Elie, Kubicki, Sylvain and Pak, Burak
year	2018
title	Participation-based Parametric Design in Early Stages - A participative design process for spatial planning in office building
doi	https://doi.org/10.52842/conf.ecaade.2018.1.429
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 429-438
summary	The term participation has been used to define different activities, such as civil debate, communication, consultation, delegation, self-help construction, political decisions. However, participation in design started from the idea that individuals whom being affected by a design project must contribute to the design process. Recently, designers have been moving closer to the future users and developing new ways to empower them to get involved in the design process. In this paper we rethink the way the early design process is developed in a participatory approach thanks to parametric methods. A use case is proposed showing the potential of parametric design methods to empower the participation of users in the design of their facilities. The use case is dealing in particular with the spatial planning of an office building where the users together with the spatial planning team are able to design the layout spatial configuration by 1) fixing the objectives, 2) manipulating the model, 3)modifying some parameters, 4) visualizing the iterations and evaluating in a real-time each solution in an interactive 3D environment and together with facility managers 5) choosing the configuration of the spatial layout.
keywords	Computational design; Participatory design; Optimization ; Parametric design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_438
id	ecaade2018_438
authors	Das, Subhajit
year	2018
title	Interactive Artificial Life Based Systems, Augmenting Design Generation and Evaluation by Embedding Expert Opinion - A Human Machine dialogue for form finding.
doi	https://doi.org/10.52842/conf.ecaade.2018.1.085
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 85-94
summary	Evolution of natural life and subsequently selection of life forms is an interesting topic that has been explored multiple times. This area of research and its application has high relevance in evolutionary design and automated design generation. Taking inspiration from Charles Darwin's theory, all biological species were formed by the process of evolution based on natural selection of the fittest (Darwin, n.d.) this paper explains exploratory research showcasing semi-automatic design generation. This is realized by an interactive artificial selection tool, where the designer or the end user makes key decisions steering the propagation and breeding of future design artifacts. This paper, describes two prototypes and their use cases, highlighting interaction based optimal design selection. One of the prototypes explains a 2d organic shape creator using a metaball shape approach, while the other discusses a spatial layout generation technique for conceptual design.
keywords	design generation; implicit surfaces; artificial life; decision making; artificial selection; spatial layout generation
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2018_339
id	ecaade2018_339
authors	Fereos, Pavlos, Tsiliakos, Marios and Jaschke, Clara
year	2018
title	Spaceship Tectonics - Design Computation Pedagogy for Generative Sci-Fi Building Skins
doi	https://doi.org/10.52842/conf.ecaade.2018.2.357
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 357-366
summary	Sci-Fi architecture, both as digital or physical representations, despite their inherent intricacy, lack the spatial depth of a structured interior, material definition or program information. This discrepancy, combined with the plethora of available sci-fi motifs, inspired the development of an integrated teaching approach with the academic objective to utilize computational methods for analysis, reproduction and composition of generative building skins, and consequently architecture, which aims to be 'outside of this world' as a sci-fi design quality-enriched result of our reality. The proposed methodology is implemented at the Spaceship Architecture Design Studio at the University of Innsbruck. Its capacity to achieve a successful assimilation of design computation in the curriculum is subsequently assessed by the documentation and quantitative/qualitative evaluation of the designs developed during two academic years, in line with a generative facade articulation schema, without however undermining the rest of the virtues of tectonic spaces. The introduction of a theme like sci-fi where the design objective is not clearly defined, is examined in comparison to similar approaches, towards the corroboration of the pedagogical method proposed.
keywords	Pedagogy; Computation; Facade Design; Generative; Sci-Fi; Patterns
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2018_301
id	caadria2018_301
authors	Fereos, Pavlos, Tsiliakos, Marios and Jaschke, Clara
year	2018
title	Spaceship Architecture - A Sci-Fi Pedagogical Approach to Design Computation
doi	https://doi.org/10.52842/conf.caadria.2018.1.081
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 81-90
summary	The analysis of make-belief drawings and models of Sci-Fi spaceships and architecture, leaves architects usually in absence of interior, material or program information. The spatial depth of sci-fi digital or physical models is virtually non-existent and unresolved. This discrepancy within sci-fi scenarios inspired the development of an integrated teaching methodology within design studios, with the academic objective to utilize computational methods for analysis, reproduction and eventually composition, while assessing its capacity to achieve a successful assimilation of design computation in the curriculum. The Spaceship Architecture Design Studio at University of Innsbruck's Institute for Experimental Architecture.hochbau follows a procedural approach in which the design objective is not predefined. Yet, it aims to be 'outside of this world' as a sci-fi architectural quality-enriched result of our reality, via a design oriented course with immersive computational strategies.
keywords	pedagogy; computation; sci-fi; academia; teaching
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2018_1349
id	sigradi2018_1349
authors	Fialho Silva, Carolina
year	2018
title	White Cube in Evolution: Lighting and Digital Technology in Beyeler Foundation Architecture
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 52-59
summary	This document aims to analyze the lighting system design at the Beyeler Foundation, which is controlled by digital devices. The domination of light is considered its architectural achievement, which generates a peculiar spatial effect. The discussion draws on the white cube concept, as applied in exhibition spaces, on the notion of device, as proposed by Flusser, and on the black box expounded by Latour's theory. The design is understood as the evolution of the white cube, since it maintains the premise of neutral space, but also remains open to the external environment through a glass roof equipped with computerized shutters.
keywords	Museum architecture lighting; Digital technology; White cube; Device; Black box
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2018_052
id	caadria2018_052
authors	Fung, Enrica and Crolla, Kristof
year	2018
title	Choreographed Architecture - Body-Spatial Exploration
doi	https://doi.org/10.52842/conf.caadria.2018.1.101
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 101-110
summary	This paper presents a design-methodological case study that looks into the practical expansion of conventional conceptual architectural design media by incorporating contemporary technology of motion capture. It discusses challenges of integrating dance movement as a real-time input parameter for architectural design that aims at translating body motion into space. The paper consists of four parts, beginning with a historic background overview of scientists, physiologists, artists, choreographers, and architects who have attempted capturing body motion and turning the motion into space. The second part of the paper discusses the iterative development of the 'Dance Machine' as a methodological tool for the integration of motion capture into conceptual architectural design. Thirdly, the paper discusses tested design applications of the 'Dance Machine' by looking at two sited applications. Finally, the overall methodology is critically assessed and discussed in the light of continuous development of creative applications of motion capturing technology. The paper concludes by highlighting the architectural potential found in specific qualities of dance and by advocating for a broader palette of tools, techniques, and input methods for the conceptual design of architecture.
keywords	Choreographed architecture; Motion capture; Conceptual design media; Space design; Human body
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2018_1822
id	sigradi2018_1822
authors	Gomez-Zamora, Paula ; Swarts, Matthew; Stern, Ilan; Valdes, Francisco
year	2018
title	PZ Smart Flooring System: Spatiotemporal Occupancy Analyses for Architecture
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 937-941
summary	This paper introduces, first, the value of obtaining dynamic information through smart environments for Architecture feedback at building scale. Second, it describes the co-evolution of the systems design for specific sensitivities required to perform meaningful analyses for the different scales. Third, it presents the significance of obtaining spatial and temporal occupancy data of high resolution, allowing significant new architectural analyses to emerge. Furthermore, it concludes by describing the vision for the future trajectory of this line of research.
keywords	Smart Environments, Smart Buildings; Smart Flooring Systems; Post-occupancy Analyses; Spatiotemporal Occupancy; Piezo-based Flooring
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_257
id	ecaade2018_257
authors	Guo, Zhe, Yin, Hao and Yuan, Philip F.
year	2018
title	Spatial Redesign Method Based on Behavior Data Visualization System - UWB interior positioning technology based office space redesign method research
doi	https://doi.org/10.52842/conf.ecaade.2018.2.577
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 577-584
summary	There is a typical symbiotic relationship between behavior and space. Design and evaluation of space are also inseparable from people's behavioral needs. Therefore, the study of behavior patterns can be regarded as the process of exploring the relationship between human and space. Traditional behavioral research lacks precise micro-individual data and analytical tools to express complex environments, and is more inclined to macro and qualitative static analysis. With the maturity of indoor positioning technology, the use of big data as a medium to quantitatively study the laws of behavior has gradually penetrated into the micro-level of indoor space. This paper begins with a brief introduction of the behavioral performance research process in history. The paper then describes the method that constructs the observation, quantification and visualization process of behavior data by using UWB positioning technology and visualization implementation system through an on-site experiment of office space. The last part of this paper discusses the establishment of spatial redesign method by mining the behavior data, and translating the results into spatial attributes.
keywords	behavior data visualization; UWB interior positioning technology; data mining; spatial redesign method
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2018_365
id	caadria2018_365
authors	Ham, Jeremy J.
year	2018
title	Exploring the Intersection of Music and Architecture Through Spatial Improvisation
doi	https://doi.org/10.52842/conf.caadria.2018.1.121
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 121-130
summary	Creative practice design research brings forth rich opportunities for the exploration of inter-domain connections between music and architecture. Through inter-disciplinary creative practice explorative project work founded on a methodology of improvisation on the digital drum kit, two stages of design research project work are outlined. In the first stage, a language of polyrhythmic drumming is parametrically spatialized as a reflective lens on an extant creative practice. From here, a new form of 'Spatial Improvisation' is explored, where conceptual spatial forms are generated from improvisations on the digital drum kit. This new musico-spatial design practice involves mediating a spatio-temporal-dynamical 'Y-Condition (Martin, 1994)' wherein temporal and dynamic design decisions translate from the musical domain into the spatial domain through 'spatial thinking-in-action'.
keywords	Music and Architecture; Design Research ; Spatial Improvisation; Design Process; Parametric Digital Design
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2018_280
id	caadria2018_280
authors	Hanaoka, Ikuya, Tanaka, Seigo, Lee, Alric and Hotta, Kensuke
year	2018
title	Sight Depth Illusion with Perforated Plane - Evaluate in Mixed Reality with Head Mounted Display
doi	https://doi.org/10.52842/conf.caadria.2018.1.411
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 411-420
summary	This paper examines the existence of a visual illusion with depth of sight involving a perforated panel layered above another plane, evaluates the illusion's properties with virtual projection on a see-through, head-mounted display, and illustrates the relation between the veridical and perceived distances through a mathematical expression. The result would be indicative to egocentric spatial analysis research, and reveal potentials as a reference point for a new architectural design tool.
keywords	Sight Depth; Kansei Engeneering; Mixed Reality
series	CAADRIA
email
last changed	2022/06/07 07:50

For more results click below: