Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 619

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2018_296
id	ecaade2018_296
authors	Czyñska, Klara
year	2018
title	High Precision Visibility and Dominance Analysis of Tall Building in Cityscape - On a basis of Digital Surface Model
doi	https://doi.org/10.52842/conf.ecaade.2018.1.481
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 481-488
summary	The article presents a methodology applied for the assessment of the tall building visual impact on the city scape, using digital tools. The method has been used by the author in the planning practice in several cities in Poland. It enables to determine not only the visibility range of a planned tall building in the city spaces, but also the extent to which it dominates. Findings are presented in a map which reflects both parameters applicable to a given facility. Computation of findings is based on the model of a city consisting of a regular cloud of points (Digital Surface Model) of high quality and dedicated C++ software (developed in cooperation with author). The Visual Impact Size (VIS) method supports the process of conservation and landscaping, in particular in historical cities. It helps predicting spatial implications tall buildings may have. It may also be used for comprehensive development of a modern skyline with tall buildings as a harmonious component of the cityscape. The method is presented using the case study of the Hanza Tower building in Szczecin (Poland).
keywords	digital cityscape analysis; tall buildings; visual impact; Visual Impact Size method; viewshed; Hanza Tower in Szczecin
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_394
id	ecaade2018_394
authors	Rubinowicz, Pawe³
year	2018
title	Application of Available Digital Resources for City Visualisation and Urban Analysis
doi	https://doi.org/10.52842/conf.ecaade.2018.2.595
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 595-602
summary	The article presents two methods for generating 3D city models. The methods are based on LiDAR and GIS-2D data. The first one enables to create automatically simplified city models that include buildings in the LoD1 standard (excluding roof geometry). The second one provides for generating precise 3D city models including all components of the city space, such as buildings, tall green, city infrastructure. This involves direct transformation of DSM (Digital Surface Model) data as mesh-3D. The analyses presented are based on data available in Poland (in particular GIS). The results of the study can be easily applied for analysing other cities in Europe and elsewhere in the world. The article presents possibilities of using such models to urban analyses. The methods and figures included in the article have been developed using C++ software developed by the author.
keywords	airborne LiDAR scanning; Digital Surface Model; BDOT 10k; city visualization; digital urban analysis; urban design
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_329
id	ecaade2018_329
authors	De Luca, Francesco, Nejur, Andrei and Dogan, Timur
year	2018
title	Facade-Floor-Cluster - Methodology for Determining Optimal Building Clusters for Solar Access and Floor Plan Layout in Urban Environments
doi	https://doi.org/10.52842/conf.ecaade.2018.2.585
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 585-594
summary	Daylight standards are one of the main factors for the shape and image of cities. With urbanization and ongoing densification of cities, new planning regulations are emerging in order to manage access to sun light. In Estonia a daylight standard defines the rights of light for existing buildings and the direct solar access requirement for new premises. The solar envelope method and environmental simulations to compute direct sun light hours on building façades can be used to design buildings that respect both daylight requirements. However, no existing tool integrates both methods in an easy to use manner. Further, the assessment of façade performance needs to be related to the design of interior layouts and of building clusters to be meaningful to architects. Hence, the present work presents a computational design workflow for the evaluation and optimisation of high density building clusters in urban environments in relation to direct solar access requirements and selected types of floor plans.
keywords	Performance-driven Design; Urban Design; Direct Solar Access; Environmental Simulations and Evaluations; Parametric Modelling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2018_215
id	caadria2018_215
authors	Raspall, Felix and Banon, Carlos
year	2018
title	3D Printing Architecture: Towards Functional Space Frames
doi	https://doi.org/10.52842/conf.caadria.2018.1.215
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 215-224
summary	In architecture, the use of Additive Manufacturing (AM) technologies has been primarily limited to the production of scale models. Its application for functional buildings components has been typically undermined by the long production time, elevated cost to manufacture parts and the low mechanical properties of 3D printed components. As AM becomes faster, cheaper and stronger, opportunities for architectures that make creative use of AM to produce functional architectural pieces are emerging. In this paper, we propose and discuss the application of AM in complex space frames and the theoretical and practical implications. Three built projects by the authors support our hypothesis that AM has a clear application in architecture and that space frames constitutes a promising structural typology. In addition, we investigate how AM can be used to resolve architectural systems beyond structure and enclosure, such as data and power transmission. The paper presents background research and our contribution to the digital design tools, the manufacturing and assembly processes, and the analysis of the performances of the building components and the final built pieces.
keywords	Additive Manufacturing; Digital Design; Space frames
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaaderis2018_110
id	ecaaderis2018_110
authors	Kyprianou, Stefanos, Polyviou, Pavlos, Tsaggari, Marianna and Phocas, Marios C.
year	2018
title	Tall Tensegrities - A Parametric Deformation Control Analysis
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 87-94
keywords	The design of tall structures with high slenderness, i.e. width/height ratio, and minimum self-weight, considers in addition to aspects of modularity, constructability and connectivity of the primary members, the static and dynamic behavior of the systems. Assuming constant mass and damping ratio over the height of the building, the structure necessitates respective definition of its stiffness properties, resulting from its configuration, i.e. geometrical stiffness, and the section properties of the members applied, for achieving controlled deformations under horizontal loading. In particular, structural deformation control is traced in the current paper in simplified means through a Finite-Element Analysis of a tall tensegrity structure with overall system dimensions of 12.12/96 m, i.e. 1/7.92 slenderness, developed in three different configurations. Furthermore, a differentiated pretension of the tension-only members of one of the systems has been applied for control of its response behavior. The parametric structural analysis of the tensegrity systems verifies the significant role of the tension-only elements in the system stabilization and horizontal response.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	acadia18_394
id	acadia18_394
authors	Adel, Arash; Thoma, Andreas; Helmreich, Matthias; Gramazio, Fabio; Kohler, Matthias
year	2018
title	Design of Robotically Fabricated Timber Frame Structures
doi	https://doi.org/10.52842/conf.acadia.2018.394
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 394-403
summary	This paper presents methods for designing nonstandard timber frame structures, which are enabled by cooperative multi-robotic fabrication at building-scale. In comparison to the current use of automated systems in the timber industry for the fabrication of plate-like timber frame components, this research relies on the ability of robotic arms to spatially assemble timber beams into bespoke timber frame modules. This paper investigates the following topics: 1) A suitable constructive system facilitating a just-in-time robotic fabrication process. 2) A set of assembly techniques enabling cooperative multi-robotic spatial assembly of bespoke timber frame modules, which rely on a man-machine collaborative scenario. 3) A computational design process, which integrates architectural requirements, fabrication constraints, and assembly logic. 4) Implementation of the research in the design and construction of a multi-story building, which validates the developed methods and highlights the architectural implications of this approach.
keywords	full paper, fabrication & robotics, generative design, computation, timber architecture
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	acadia18_366
id	acadia18_366
authors	Baseta, Efilena; Bollinger, Klaus
year	2018
title	Construction System for Reversible Self-Formation of Grid Shells. Correspondence between physical and digital form
doi	https://doi.org/10.52842/conf.acadia.2018.366
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 366-375
summary	This paper presents a construction system which offers an efficient materialization method for double-curved gridshells. This results in an active-bending system of controlled deflections. The latter system embeds its construction manual into the geometry of its components. Thus it can be used as a self-formation process. The two presented gridshell structures are composed of geometry-induced, variable stiffness elements. The latter elements are able to form programmed shapes passively when gravitational loads are applied. Each element consists of two layers and a slip zone between them. The slip allows the element to be flexible when it is straight and increasingly stiffer while its curvature increases. The amplitude of the slip defines the final deformation of the element. As a result, non-uniform deformations can be obtained with uniform cross sections and loads. When the latter elements are used in grid configurations, self-formation of initially planar surfaces emerges. The presented system eliminates the need for electromechanical equipment since it relies on material properties and hierarchical geometrical configurations. Wood, as a flexible and strong material, has been used for the construction of the prototypes. The fabrication of the timber laths has been done via CNC industrial milling processes. The comparison between the initial digital design and the resulting geometry of the physical prototypes is reviewed in this paper. The aim is to inform the design and fabrication process with performance data extracted from the prototypes. Finally, the scalability of the system shows its potential for large-scale applications, such as transformable structures.
keywords	full paper, material & adaptive systems, flexible structures, digital fabrication, self-formation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	acadia18_424
id	acadia18_424
authors	Bucklin, Oliver; Drexler, Hans; Krieg, Oliver David; Menges, Achim
year	2018
title	Integrated Solid Timber. A multi-requisite system for the computational design,fabrication, and construction of versatile building envelopes
doi	https://doi.org/10.52842/conf.acadia.2018.424
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 424-433
summary	The paper presents the development of a building system made from solid timber that fulfils the requirements of modern building skins while expanding the design possibilities through innovation in computational design and digital fabrication. Multiple strategies are employed to develop a versatile construction system that generates structure, enclosure and insulation while enabling a broad design space for contemporary architectural expression. The basic construction unit augments the comparatively high insulation values of solid timber by cutting longitudinal slits into beams, generating air chambers that further inhibit thermal conductivity. These units are further enhanced through a joinery system that uses advanced parametric modeling and computerized control to augment traditional joinery techniques. Prototypes of the system are tested at a building component level with digital models and physical laboratory tests. It is further evaluated in a demonstrator building to test development and further refine design, fabrication and assembly methods. Results are integrated into proposals for new methods of implementation. The results of the research thus far demonstrate the validity of the strategy, and continuing research will improve its viability as a building system.
keywords	full paper, materials and adaptive systems, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2021_257
id	ecaade2021_257
authors	Cichocka, Judyta Maria, Loj, Szymon and Wloczyk, Marta Magdalena
year	2021
title	A Method for Generating Regular Grid Configurations on Free-From Surfaces for Structurally Sound Geodesic Gridshells
doi	https://doi.org/10.52842/conf.ecaade.2021.2.493
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 493-502
summary	Gridshells are highly efficient, lightweight structures which can span long distances with minimal use of material (Vassallo & Malek 2017). One of the most promising and novel categories of gridshells are bending-active (elastic) systems (Lienhard & Gengnagel 2018), which are composed of flexible members (Kuijenhoven & Hoogenboom 2012). Timber elastic gridshells can be site-sprung or sequentially erected (geodesic). While a lot of research focus is on the site-sprung ones, the methods for design of sequentially-erected geodesic gridshells remained underdeveloped (Cichocka 2020). The main objective of the paper is to introduce a method of generating regular geodesic grid patterns on free-form surfaces and to examine its applicability to design structurally feasible geodesic gridshells. We adopted differential geometry methods of generating regular bidirectional geodesic grids on free-form surfaces. Then, we compared the structural performance of the regular and the irregular grids of the same density on three free-form surfaces. The proposed method successfully produces the regular geodesic grid patterns on the free-form surfaces with varying curvature-richness. Our analysis shows that gridshells with regular grid configurations perform structurally better than those with irregular patterns. We conclude that the presented method can be readily used and can expand possibilities of application of geodesic gridshells.
keywords	elastic timber gridshell; bending-active structure; grid configuration optimization; computational differential geometry; material-based design methodology; free-form surface; pattern; geodesic
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2018_1358
id	sigradi2018_1358
authors	Heesterman, Mikayla; Sweet, Kevin
year	2018
title	Robotic Connections: Customisable Joints for Timber Construction
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 644-652
summary	Timber is one of the most sustainable, renewable products, and coupled with computational tools has the potential to be redefined as a digital-age material. The research outlined in this paper employs contemporary digital fabrication techniques utilising a robotic arm to develop complex, CNC based parametric connections for engineered timber. While CNC joinery that utilizes three - five axis machining capabilities is increasingly common, the introduction of the six-axis robot as a machining tool provides greater freedom of movement and a wider range of complex procedures. This research returns to traditional Japanese timber craft, which offers unique structural and sustainable advantages. Using computational tools, new complex parametric connections suitable for contemporary fabrication will be designed and contribute to a library of joints suitable mass-customised in non-standard timber architecture.
keywords	Robotics; Fabrication; Parametric; Timber; Architecture
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2019_665
id	caadria2019_665
authors	Jin, Jinxi, Han, Li, Chai, Hua, Zhang, Xiao and Yuan, Philip F.
year	2019
title	Digital Design and Construction of Lightweight Steel-Timber Composite Gridshell for Large-Span Roof - A Practice of Steel-timber Composite Gridshell in Venue B for 2018 West Bund World AI Conference
doi	https://doi.org/10.52842/conf.caadria.2019.1.183
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 183-192
summary	Timber gridshell is an efficient structural system. However, the feature of double curved surface result in limitation of practical application of timber gridshell. Digital technology provides an opportunity to break this limitation and achieve a lightweight free-form gridshell. In the practice of Venue B for 2018 West Bund World AI Conference, architects and structural engineers cooperated to explore innovative design of lightweight steel-timber composite gridshell with the help of digital tools. Setting digital technology as support and restrains of the project as motivation, the design tried to achieve the realization of material, structure, construction and spatial expression. The digital design and construction process will be discussed from four aspects, including form-finding of gridshell surface, steel-timber composite design, digital detailed design and model-based fabrication and construction. We focuses on the use of digital tools in this process, as well as the role of the design subject.
keywords	Timber Gridshell; Steel-timber Composite; Digital Design and Construction; Lightweight Structure; Large-span Roof
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia23_v1_220
id	acadia23_v1_220
authors	Ruan, Daniel; Adel, Arash
year	2023
title	Robotic Fabrication of Nail Laminated Timber: A Case Study Exhibition
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 220-225.
summary	Previous research projects (Adel, Agustynowicz, and Wehrle 2021; Adel Ahmadian 2020; Craney and Adel 2020; Adel et al. 2018; Apolinarska et al. 2016; Helm et al. 2017; Willmann et al. 2015; Oesterle 2009) have explored the use of comprehensive digital design-to-fabrication workflows for the construction of nonstandard timber structures employing robotic assembly technologies. More recently, the Robotically Fabricated Structure (RFS), a bespoke outdoor timber pavilion, demonstrated the potential for highly articulated timber architecture using short timber elements and human-robot collaborative assembly (HRCA) (Adel 2022). In the developed HRCA process, a human operator and a human fabricator work alongside industrial robotic arms in a shared working environment, enabling collaborative fabrication approaches. Building upon this research, we present an exploration adapting HRCA to nail-laminated timber (NLT) fabrication, demonstrated through a case study exhibition (Figures 1 and 2).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaade2018_232
id	ecaade2018_232
authors	Al Bondakji, Louna, Chatzi, Anna-Maria, Heidari Tabar, Minoo, Wesseler, Lisa-Marie and Werner, Liss C.
year	2018
title	VR-visualization of High-dimensional Urban Data
doi	https://doi.org/10.52842/conf.ecaade.2018.2.773
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 773-780
summary	The project aims to investigate the possibility of VR in a combination of visualizing high-dimensional urban data. Our study proposes a data-based tool for urban planners, architects, and researchers to 3D visualize and experience an urban quarter. Users have a possibility to choose a specific part of a city according to urban data input like "buildings, streets, and landscapes". This data-based tool is based on an algorithm to translate data from Shapefiles (.sh) in a form of a virtual cube model. The tool can be scaled and hence applied globally. The goal of the study is to improve understanding of the connection and analysis of high-dimensional urban data beyond a two-dimensional static graph or three-dimensional image. Professionals may find an optimized condition between urban data through abstract simulation. By implementing this tool in the early design process, researchers have an opportunity to develop a new vision for extending and optimizing urban materials.
keywords	Abstract Urban Data Visualization; Virtual Reality; Geographical Information System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2018_1867
id	sigradi2018_1867
authors	Alawadhi, Mohammad; Yan, Wei
year	2018
title	Geometry from 3D Photogrammetry for Building Energy Modeling
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 631-637
summary	Building energy modeling requires skilled labor, and there is a need to make environmental assessments of buildings more efficient and accessible for architects. A building energy model is based on collecting data from the real, physical world and representing them as a digital model. Recent digital photogrammetry tools can reconstruct real-world geometry by transforming photographs into 3D models automatically. However, there is a lack of accessible workflows that utilize this technology for building energy modeling and simulations. This paper presents a novel methodology to generate a building energy model from a photogrammetry-based 3D model using available tools and computer algorithms.
keywords	3D scanning; Building energy modeling; Building energy simulation; Digital photogrammetry; Photo-to-BEM
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_405
id	ecaade2018_405
authors	Belém, Catarina and Leit?o, António
year	2018
title	From Design to Optimized Design - An algorithmic-based approach
doi	https://doi.org/10.52842/conf.ecaade.2018.2.549
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 549-558
summary	Stringent requirements of efficiency and sustainability lead to the demand for buildings that have good performance regarding different criteria, such as cost, lighting, thermal, and structural, among others. Optimization can be used to ensure that such requirements are met. In order to optimize a design, it is necessary to generate different variations of the design, and to evaluate each variation regarding the intended criteria. Currently available design and evaluation tools often demand manual and time-consuming interventions, thus limiting design variations, and causing architects to completely avoid optimization or to postpone it to later stages of the design, when its benefits are diminished. To address these limitations, we propose Algorithmic Optimization, an algorithmic-based approach that combines an algorithmic description of building designs with automated simulation processes and with optimization processes. We test our approach on a daylighting optimization case study and we benchmark different optimization methods. Our results show that the proposed workflow allows to exclude manual interventions from the optimization process, thus enabling its automation. Moreover, the proposed workflow is able to support the architect in the choice of the optimization method, as it enables him to easily switch between different optimization methods.
keywords	Algorithmic Design; Algorithmic Analysis; Algorithmic Optimization; Lighting optimization; Black-Box optimization
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2018_342
id	caadria2018_342
authors	Bhagat, Nikita, Rybkowski, Zofia, Kalantar, Negar, Dixit, Manish, Bryant, John and Mansoori, Maryam
year	2018
title	Modulating Natural Ventilation to Enhance Resilience Through Modifying Nozzle Profiles - Exploring Rapid Prototyping Through 3D-Printing
doi	https://doi.org/10.52842/conf.caadria.2018.2.185
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 185-194
summary	The study aimed to develop and test an environmentally friendly, easily deployable, and affordable solution for socio-economically challenged populations of the world. 3D-printing (additive manufacturing) was used as a rapid prototyping tool to develop and test a façade system that would modulate air velocity through modifying nozzle profiles to utilize natural cross ventilation techniques in order to improve human comfort in buildings. Constrained by seasonal weather and interior partitions which block the ability to cross ventilate, buildings can be equipped to perform at reduced energy loads and improved internal human comfort by using a façade system composed of retractable nozzles developed through this empirical research. This paper outlines the various stages of development and results obtained from physically testing different profiles of nozzle-forms that would populate the façade system. In addition to optimizing nozzle profiles, the team investigated the potential of collapsible tube systems to permit precise placement of natural ventilation directed at occupants of the built space.
keywords	Natural ventilation; Wind velocity; Rapid prototyping; 3D-printing; Nozzle profiles
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2018_187
id	ecaade2018_187
authors	Chatzivasileiadi, Aikaterini, Hosney Lila, Anas M., Lannon, Simon and Jabi, Wassim
year	2018
title	The Effect of Reducing Geometry Complexity on Energy Simulation Results
doi	https://doi.org/10.52842/conf.ecaade.2018.2.559
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 559-568
summary	Accuracy and time are metrics inherently associated with the design process and the energy performance simulation of buildings. The accurate representation of the building is an essential requirement for energy analysis, which comes with the expense of time; however, this is in contrast with the need to minimise the simulation time in order to make it compatible with design times. This is a particularly interesting aspect in the case of complex geometries, which are often simplified for use in building energy performance simulation. The effects of this simplification on the accuracy of simulation results are not usually reported. This paper explored these effects through a systematic analysis of several test cases. The results indicate that the use of orthogonal prisms as simplified surrogates for buildings with complex shapes presents a worst-case scenario that should be avoided where possible. A significant reduction of geometry complexity by at least 50% can also be achieved with negligible effects on simulation results, while minimising the time requirements. Accuracy, however, deteriorates rapidly below a critical threshold.
keywords	Building performance simulation; Energy analysis; Geometry simplification
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2018_1571
id	sigradi2018_1571
authors	de Mello Monteiro, Verner Max Liger; Alves Bezerra, José Rauryson; Paulino do Nascimento, Paulo Roberto; Ramalho dos Santos Júnior, Erisvaldo
year	2018
title	Mathematizing Niemeyer’s architecture through parametric modeling: evaluating the parables of the Pampulha Church
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 294-299
summary	This paper describes the mathematization process behind the parables of the Pampulha Church, one of the most iconic buildings designed by Oscar Niemeyer, in order to check how applicable was the use of analytic geometry in his architecture. To reach this, we factored the second degree equations presented on the building based on the parable height and width, then using parametric modeling to translate the formula into shape. As a result, the study intended to demonstrate how equations can be integrated into architecture, identifying how conic curves are being applied to the architectural geometry.
keywords	Parametric modeling; Pampulha church; Oscar Niemeyer; Analytic geometry
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2018_1412
id	sigradi2018_1412
authors	de Oliveira Gomes, Emerson Bruno; da Silva Machado, Rodrigo Carlos; Machado Gomes, Cristiani; de Souza Xavier, Luis Gustavo
year	2018
title	The Virtual Reality as a tool to analyze modifications in the architecture of the city. Case study: the historical center of the city of Belém-Pará.
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 860-865
summary	This paper presents the partial results of a research that experiments the use of Virtual Reality (VR) in the analysis of future interventions in the architecture of the city of Belém. The objective was the virtual reconstruction of part of the port area of the city, as it was about 100 years. The methods include a historical survey of the site, visits to obtain photographs and measurements, as well as the digital reconstruction of buildings (external faces only). The experiment used Sketchup software for modeling, Unity 3D for rendering and navigation, and HTC Vive glasses for immersion.
keywords	Virtual reality; Architecture; History; Engine games
series	SIGRADI
email
last changed	2021/03/28 19:58

For more results click below: