Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 610

Reformat results as: short short into frame detailed detailed into frame

_id	ecaaderis2018_109
id	ecaaderis2018_109
authors	Fereos, Pavlos and Tsiliakos, Marios
year	2018
title	Lucid Foam - Multi-Axis Robotic Hot-Wire Cutting for Translucency
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 123-130
keywords	Hotwire cutting of Styrofoam or Polystyrene has been a popular tool for developing fast prototypes by the architectural community. The introduction of multi-axis industrial robots in the architectural curriculum, and the enhancement of the design to fabrication process by software bridging the gap, provided an alternative meaning to the traditional mostly representational process of hotwire cutting.This paper sets out to document and assess the procedural methodology and the results of a series of integrated design to fabrication experiments that took place in the Institut für Experimentelle Architektur-Hochbau. By channelling design intention towards a component assembly for a translucent effect, students were asked to utilise industrial robots to fabricate and prototype via hotwire cutting, designs that refer to architectural elements. These elements, mainly due to their scale and the commercial availability of bulk Styrofoam panels, can lead to functional or ornamental representations of discrete elements, which can be assembled together as part of a greater design.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	acadia18_126
id	acadia18_126
authors	Johns, Ryan Luke; Anderson, Jeffrey
year	2018
title	Interfaces for Adaptive Assembly
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 126-135
doi	https://doi.org/10.52842/conf.acadia.2018.126
summary	While robotic tools have greatly expanded the scope of computational control and design freedom in architectural assembly, the vast majority of projects involving robotic customization depend on standardized, mass produced components. By relinquishing some design agency to automated systems which respond to on-site material variations, it is possible to produce methods of construction which rely on locally-sourced components with low embodied energy. Such adaptive automation can provide resource efficiency and the aesthetic advantages of natural or reclaimed materials, but can also beget technical challenges of increasing complexity. By expanding design goals to incorporate intuitive collaborative interfaces, technical gaps can be understood even by non-experts, and leveraged towards new forms of creative expression. This paper presents the results of an interactive installation in which visitors can provide any variety of objects to a collaborative robotic manipulator (UR5) which recognizes part geometry and attempts to construct a dry-stacked wall from the material offerings. A visual and auditory interface provides suggestions and error messages to participants to facilitate an understanding of the acceptable material morphologies which can be used within the constraints of the system.
keywords	full paper, materials & adaptive systems, non-production robotics, digital materials, representation + perception
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	ecaaderis2018_111
id	ecaaderis2018_111
authors	Kontovourkis, Odysseas and Tryfonos, George
year	2018
title	An integrated robotically-driven workflow for the development of elastic tensile structures in various scales
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 111-120
keywords	This paper presents an ongoing work towards the development of an integrated robotically-driven workflow that can be used for the design, development and subsequent fabrication of small-to large-scale elastic tensile mesh structures. This approach involves digital form-finding and optimization, driven by robotic manufacturing principles and it aims to overcome the limitations of currently available tools, to work either in the design or the fabrication phase of the process. At the same time, it involves the fabrication of systems in several scales followed by respective analyses of results according to the specific type and diameter of the material used. Specifically, form-finding and optimization are responsible for controlling the pretension of the elastic threads, aiming to determine the final tensile mesh and to generate the additive robotic tool-path. In parallel, the type and diameter of the material involved, define the necessary changes of the end-effector tool, which is responsible to implement the process. Despite that design results can be in any scale, for study purposes an experimentation into a small-scale is conducted, to evaluate the suggested automated construction process in general and the end-effector mechanism in particular.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	acadia18_260
id	acadia18_260
authors	Tish, Daniel; Schork, Tim; McGee, Wes
year	2018
title	Topologically Optimized and Functionally Graded Cable Nets. New approaches through robotic additive manufacturing
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 260-265
doi	https://doi.org/10.52842/conf.acadia.2018.260
summary	Recent advancements in the realm of additive manufacturing technologies have made it possible to directly manufacture the complex geometries that are resultant from topological optimization and functionally graded material processes. Topological optimization processes are well understood and widely used within the realm of structural engineering and have been increasingly adopted in architectural design and research. However, there has been little research devoted to the topological optimization of cable nets and their fabrication through robotic additive manufacturing. This paper presents a design framework for the optimization of additively manufactured tensile cable nets that attempts to bridge between these two domains by reframing the scale of topological optimization processes. Instead of focusing solely on the topology optimization at the macro-scale of cable nets, this research develops a method to optimize the meso-scale topology and defines metamaterial units with different properties to be aggregated into a complex whole. This reorientation from the formal towards the material domain signals an engagement with morphogenetic modes of design that find formal expression through bottom-up material processes. In order to further investigate the emerging potentials of this reorientation, the presented method is validated through physical deformation tests, as well as applied to the design of a furniture-scale case study project realized through the use of robotic additive manufacturing of elastomeric materials
keywords	work in progress, materials & adaptive systems, robotic production, computation, flexible structures
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	ecaade2018_386
id	ecaade2018_386
authors	Brandao, Filipe, Paio, Alexandra and Antunes, Nuno
year	2018
title	Towards a Digitally Fabricated Disassemble-able Building System - A CNC fabricated T-Slot Joint
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 11-20
doi	https://doi.org/10.52842/conf.ecaade.2018.2.011
summary	Growing dissemination of digital fabrication technologies coupled with a renewed interest in wood as a construction material have led to a resurgence of research into integral wood joints. Recent research on digitally fabricated wood joints has focused primarily on robotic or on CNC router produced snap-fit or tab-and-slot joints. These types of joints have several problems in sheathing to structure connections. The present paper reports on research into design and fabrication of T-slot joints that allow hidden back-face connections which are disassemble-able. It is part of an ongoing research whose aim is to develop disassemble-able and mass customizable construction system of partition walls for building renovation.
keywords	Wood Joints; Digital Fabrication; Wood; Design for Disassembly
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2021_257
id	ecaade2021_257
authors	Cichocka, Judyta Maria, Loj, Szymon and Wloczyk, Marta Magdalena
year	2021
title	A Method for Generating Regular Grid Configurations on Free-From Surfaces for Structurally Sound Geodesic Gridshells
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 493-502
doi	https://doi.org/10.52842/conf.ecaade.2021.2.493
summary	Gridshells are highly efficient, lightweight structures which can span long distances with minimal use of material (Vassallo & Malek 2017). One of the most promising and novel categories of gridshells are bending-active (elastic) systems (Lienhard & Gengnagel 2018), which are composed of flexible members (Kuijenhoven & Hoogenboom 2012). Timber elastic gridshells can be site-sprung or sequentially erected (geodesic). While a lot of research focus is on the site-sprung ones, the methods for design of sequentially-erected geodesic gridshells remained underdeveloped (Cichocka 2020). The main objective of the paper is to introduce a method of generating regular geodesic grid patterns on free-form surfaces and to examine its applicability to design structurally feasible geodesic gridshells. We adopted differential geometry methods of generating regular bidirectional geodesic grids on free-form surfaces. Then, we compared the structural performance of the regular and the irregular grids of the same density on three free-form surfaces. The proposed method successfully produces the regular geodesic grid patterns on the free-form surfaces with varying curvature-richness. Our analysis shows that gridshells with regular grid configurations perform structurally better than those with irregular patterns. We conclude that the presented method can be readily used and can expand possibilities of application of geodesic gridshells.
keywords	elastic timber gridshell; bending-active structure; grid configuration optimization; computational differential geometry; material-based design methodology; free-form surface; pattern; geodesic
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2018_301
id	ecaade2018_301
authors	Cocho-Bermejo, Ana, Birgonul, Zeynep and Navarro-Mateu, Diego
year	2018
title	Adaptive & Morphogenetic City Research Laboratory
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 659-668
doi	https://doi.org/10.52842/conf.ecaade.2018.2.659
summary	"Smart City" business model is guiding the development of future metropolises. Software industry sales to town halls for city management services efficiency improvement are, these days, a very pro?table business. Being the model decided by the industry, it can develop into a dangerous situation in which the basis of the new city design methodologies is decided by agents outside academia expertise. Drawing on complex science, social physics, urban economics, transportation theory, regional science and urban geography, the Lab is dedicated to the systematic analysis of, and theoretical speculation on, the recently coined "Science of Cities" discipline. On the research agenda there are questions arising from the synthesis of architecture, urban design, computer science and sociology. Collaboration with citizens through inclusion and empowerment, and, relationships "City-Data-Planner-Citizen" and "Citizen-Design-Science", configure Lab's methodology provoking a dynamic responsive process of design that is yet missing on the path towards the real responsive city.
keywords	Smart City; Morphogenetic Urban Design; Internet of Things; Building Information Modelling; Evolutionary Algorithms; Machine Learning & Artificial Intelligence
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2018_1763
id	sigradi2018_1763
authors	Duarte Martins, Lucas; Ferreira Borges, Marina
year	2018
title	The Use of High Low Architecture in the Creation of Alternative Construction Elements
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 367-374
summary	This study presents an investigation on how the use of digital tools in the fields of architecture and engineering can help establish a connection between the architectural projects developed within Universities and what is produced by the construction industry, consolidating a critical design process that reflects on the use of current technologies. To do so, it will be necessary to employ knowledge gathered from the intersecting areas of architecture, computation and engineering to rethink the use of common materials directing it towards a non-specialized workforce, a relationship that can be defined as high-low architecture.
keywords	High-Low Architecture; Concrete block; Digital tools; Performance-based design; Construction industry
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_339
id	ecaade2018_339
authors	Fereos, Pavlos, Tsiliakos, Marios and Jaschke, Clara
year	2018
title	Spaceship Tectonics - Design Computation Pedagogy for Generative Sci-Fi Building Skins
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 357-366
doi	https://doi.org/10.52842/conf.ecaade.2018.2.357
summary	Sci-Fi architecture, both as digital or physical representations, despite their inherent intricacy, lack the spatial depth of a structured interior, material definition or program information. This discrepancy, combined with the plethora of available sci-fi motifs, inspired the development of an integrated teaching approach with the academic objective to utilize computational methods for analysis, reproduction and composition of generative building skins, and consequently architecture, which aims to be 'outside of this world' as a sci-fi design quality-enriched result of our reality. The proposed methodology is implemented at the Spaceship Architecture Design Studio at the University of Innsbruck. Its capacity to achieve a successful assimilation of design computation in the curriculum is subsequently assessed by the documentation and quantitative/qualitative evaluation of the designs developed during two academic years, in line with a generative facade articulation schema, without however undermining the rest of the virtues of tectonic spaces. The introduction of a theme like sci-fi where the design objective is not clearly defined, is examined in comparison to similar approaches, towards the corroboration of the pedagogical method proposed.
keywords	Pedagogy; Computation; Facade Design; Generative; Sci-Fi; Patterns
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaadesigradi2019_398
id	ecaadesigradi2019_398
authors	Fink, Theresa and Koenig, Reinhard
year	2019
title	Integrated Parametric Urban Design in Grasshopper / Rhinoceros 3D - Demonstrated on a Master Plan in Vienna
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 313-322
doi	https://doi.org/10.52842/conf.ecaade.2019.3.313
summary	By 2050 an estimated 70 percent of the world's population will live in megacities with more than 10 million citizens (Renner 2018). This growth calls for new target-oriented, interdisciplinary methods in urban planning and design in cities to meet sustainable development targets. In response, this paper exemplifies an integrated urban design process on a master plan project in Vienna. The objective is to investigate the potential towards a holistic, digital, urban design process aimed at the development of a practical methodology for future designs. The presented urban design process includes analyses and simulation tools within Rhinoceros 3D and its plug-in Grasshopper as quality-enhancing mediums that facilitate the creative approaches in the course of the project. The increase in efficiency and variety of design variants shows a promising future for the practical suitability of this approach.
keywords	urban design; parametric modeling; urban simulation; design evaluation; environmental performance
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:50

_id	ecaade2018_425
id	ecaade2018_425
authors	Foged, Isak Worre and Jensen, Mads Brath
year	2018
title	Thermal Compositions Through Robot Based Thermal Mass Distribution
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 783-790
doi	https://doi.org/10.52842/conf.ecaade.2018.1.783
summary	This work develops, implement and test a method and model for the distribution of material in relation to thermal performances through robot based extrusion of concrete. The aim is to suggest a way for architecture to use advanced fabrication techniques towards environmental passive strategies, which potentially decrease a buildings operative energy budget, while creating articulated thermal sensations for humans. Through computational, material and design explorations, by prototypes and a final demonstrator, the work proposes how thermal mass can be organized both in terms of its robot based successive fabrication based layering and as an approach to generate an assembly of thermal based building blocks into architectural structures.
keywords	Robot based concrete extrusion; Thermal Architecture; Simulation; Demonstrator
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia18_226
id	acadia18_226
authors	Glynn, Ruairi; Abramovic, Vasilija; Overvelde, Johannes T. B.
year	2018
title	Edge of Chaos. Towards intelligent architecture through distributed control systems based on Cellular Automata.
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 226-231
doi	https://doi.org/10.52842/conf.acadia.2018.226
summary	From the “Edge of Chaos”, a mathematical space discovered by computer scientist Christopher Langton (1997), compelling behaviors originate that exhibit both degrees of organization and instability creating a continuous dance between order and chaos. This paper presents a project intended to make this complex theory tangible through an interactive installation based on metamaterial research which demonstrates emergent behavior using Cellular Automata (CA) techniques, illustrated through sound, light and motion. We present a multi-sensory narrative approach that encourages playful exploration and contemplation on perhaps the biggest questions of how life could emerge from the disorder of the universe. We argue a way of creating intelligent architecture, not through classical Artificial Intelligence (AI), but rather through Artificial Life (ALife), embracing the aesthetic emergent possibilities that can spontaneously arise from this approach. In order to make these ideas of emergent life more tangible we present this paper in four integrated parts, namely: narrative, material, hardware and computation. The Edge of Chaos installation is an explicit realization of creating emergent systems and translating them into an architectural design. Our results demonstrate the effectiveness of a custom CA for maximizing aesthetic impact while minimizing the live time of architectural kinetic elements.
keywords	work in progress, complexity, responsive architecture, distributed computing, emergence, installation, interactive architecture, cellular automata
series	ACADIA
type	paper
email
last changed	2022/06/07 07:51

_id	ecaade2018_260
id	ecaade2018_260
authors	Kallegias, Alexandros
year	2018
title	Design by Computation - A material driven study
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 279-284
doi	https://doi.org/10.52842/conf.ecaade.2018.2.279
summary	The paper aims to address methods of creating a system for design through material studies that are employed as feedback on a computational digital model. The case study described in this paper is the output of an exploration that has investigated physical transformation, interaction and wood materiality over the period of two weeks of the international architecture programme AA Athens Visiting School in Greece. Real-time performative form-responsive methods based on bending and stretching have been developed and simulated in an open-source programming environment. The output of the simulation has been informed by the results of material tests that took place in parallel and have served as inputs for the fine-tuning of the simulation. Final conclusions were made possible from these explorations that enabled the fabrication of a prototype using wood veneer at one-to-one scale. From a pedagogical aspect, the research main focus is to improve the quality of architectural education by learning through making. This is made possible using advanced computational techniques and coupling them with material studies towards an integrated system for architectural prototypes within a limited time frame.
keywords	materiality; computation; 1:1 scale prototyping; simulation; fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2018_1563
id	sigradi2018_1563
authors	Karaoglan Cemre, Füsun; Alaçam, Sema
year	2018
title	Design of a Post-Disaster Temporary Living Space Through the Use of Shape Evolution
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 191-198
summary	As the increasing number of disasters taking place each year result in a larger number of people in need of urgent sheltering, temporary shelters become a more critical subject of architectural design. With this in mind, the aim of this study is to design a temporary post-disaster living space for the displaced people. Towards this aim, 2D layout possibilities are generated and evaluated with genetic algorithms. Different from the previous studies, the project focuses on the potential use of shape evolution and multi-objective genetic algorithms for the design of a disaster relief shelter. The results are expected to produce a holistic digital model that can respond to different post-disaster scenarios.
keywords	Computational design; Emergency architecture; Genetic algorithms; Modularity; Mass customization
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2018_111
id	ecaade2018_111
authors	Khean, Nariddh, Fabbri, Alessandra and Haeusler, M. Hank
year	2018
title	Learning Machine Learning as an Architect, How to? - Presenting and evaluating a Grasshopper based platform to teach architecture students machine learning
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 95-102
doi	https://doi.org/10.52842/conf.ecaade.2018.1.095
summary	Machine learning algorithms have become widely embedded in many aspects of modern society. They have come to enhance systems, such as individualised marketing, social media services, and search engines. However, contrasting its growing ubiquity, the architectural industry has been comparatively resistant in its adoption; objectively one of the slowest industries to integrate with machine learning. Machine learning expertise can be separate from professionals in other fields; however, this separation can be a major hinderance in architecture, where interaction between the designer and the design facilitates the production of favourable outcomes. To bridge this knowledge gap, this research suggests that the solution lies with architectural education. Through the development of a novel educative framework, the research aims to teach architecture students how to implement machine learning. Exploration of student-centred pedagogical strategies was used to inform the conceptualisation of the educative module, which was subsequently implemented into an undergraduate computational design studio, and finally evaluated on its ability to effectively teach designers machine learning. The developed educative module represents a step towards greater technological adoption in the architecture industry.
keywords	Artificial Intelligence; Machine Learning; Neural Networks; Student-Centred Learning; Educative Framework
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2018_126
id	caadria2018_126
authors	Khean, Nariddh, Kim, Lucas, Martinez, Jorge, Doherty, Ben, Fabbri, Alessandra, Gardner, Nicole and Haeusler, M. Hank
year	2018
title	The Introspection of Deep Neural Networks - Towards Illuminating the Black Box - Training Architects Machine Learning via Grasshopper Definitions
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 237-246
doi	https://doi.org/10.52842/conf.caadria.2018.2.237
summary	Machine learning is yet to make a significant impact in the field of architecture and design. However, with the combination of artificial neural networks, a biologically inspired machine learning paradigm, and deep learning, a hierarchical subsystem of machine learning, the predictive capabilities of machine learning processes could prove a valuable tool for designers. Yet, the inherent knowledge gap between the fields of architecture and computer science has meant the complexity of machine learning, and thus its potential value and applications in the design of the built environment remain little understood. To bridge this knowledge gap, this paper describes the development of a learning tool directed at architects and designers to better understand the inner workings of machine learning. Within the parametric modelling environment of Grasshopper, this research develops a framework to express the mathematic and programmatic operations of neural networks in a visual scripting language. This offers a way to segment and parametrise each neural network operation into a basic expression. Unpacking the complexities of machine learning in an intermediary software environment such as Grasshopper intends to foster the broader adoption of artificial intelligence in architecture.
keywords	machine learning; neural network; action research; supervised learning; education
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaaderis2018_106
id	ecaaderis2018_106
authors	Kourniatis, Nikolaos, Christidi, Nikoletta, Fakiri, Ioanna, Tsoumpri, Dimitra, Tsoukalas, Nikolaos and Karras, Evaggelos
year	2018
title	The Geometrical Structure of new Architectural Object - The role of meta-mechanics of Holography in its formation
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 29-38
keywords	In recent years there has been a gradually increasing interest in the terms on which the design and geometrical representation of the architectural object is based. ?he true challenge lies in the development of a methodology or mechanism which, having as its starting point the traditional object geometrical representation practices, will allow for a combination of new technologies towards creating new visual messages. In this research, the process of putting together a new architectural object, the digital hologram, will be seen as one such mechanism. The new views and strategies on space are open to treating spatial constructions, as a restructuring of the structures that could bring about changes for more favorable conditions for the representation of the architectural form. Thus, the strategies of architectural pioneering are judged by their ability to develop new procedures that are capable of reversing.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	ijac201816404
id	ijac201816404
authors	Kousoulas, Stavros
year	2018
title	Shattering the black box: Technicities of architectural manipulation
source	International Journal of Architectural Computing vol. 16 - no. 4, 295-305
summary	This article attempts to reverse a fallacy often met in architectural theories and practices: that of a supposed input which through processes of what one can broadly call translations generates a built output. The input–output fallacy produces an architectural black box that treats both architectural thinking and doing as a mere process of projecting, representing and annotating ‘properly’ what will later be executed. On the contrary, a manipulative account of architecture as an active process of ecological engineering will pave the way for not only reversing the fallacy but also towards a particular understanding of architectural practices: architectural technicities and their reticular, affective potentials. Drawing on the theories of Gilbert Simondon, André Leroi-Gourhan, Gilles Deleuze and Felix Guattari, I will examine how architecture can be genealogically approached as a reticular technicity which evolves by a reciprocal concretisation of its technical objects and a generalisation of its active practitioners: no longer the application of transcendental design rules, of symbolic deductions or statistical inductions but rather abductive heuristics of affective techniques; no input nor output but practices of sensorial amplification via material manipulation and vice versa.
keywords	Abduction, concretisation, Leroi-Gourhan, Simondon, technicity
series	journal
email
last changed	2019/08/07 14:04

_id	ecaade2018_276
id	ecaade2018_276
authors	Kruºa Yemiºcio?lu, Müge, Gönenç Sorguç, Arzu and Özgenel, Ça?lar F?rat
year	2018
title	Crystal Formations and Symmetry in the Search of Patterns in Architecture
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 121-128
doi	https://doi.org/10.52842/conf.ecaade.2018.2.121
summary	Nature is always full of patterns inspiring all the disciplines and especially architecture in many ways. Currently, with the advances in technology and growing interest towards nature-driven studies, retrieving information from nature has a new connotation in scales and dimensions including both living and non-living beings. In this study, it is aimed to explore the scales of nature from Nano to Macro and a holistic approach is embraced to cope with the complexity of nature and architecture. To understand these complexities, patterns in different forms and scales serve as valuable tools to decode and recode information from one domain to another through locating the order and how patterns exist in different and changing environments with respect to forces and the urge of the existence of the being.This research focuses on the behavior of crystal formation which can be observed both in biotic and abiotic nature to understand the order generating the patterns in nature and its adaptation into a different and changing environment. This information of crystallization has great potential for architecture in terms of spatial structures, new materials and introducing a novel lattice for freeform structures. In this study, the potentials, limits and possible contributions of crystal formation are stated for architecture in the search of symmetry and patterns.
keywords	nature-driven; computational design; crystal formation; symmetry; pattern
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2018_065
id	caadria2018_065
authors	Makki, Mohammed and Showkatbakhsh, Milad
year	2018
title	Control of Morphological Variation Through Population Based Fitness Criteria
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 1, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 153-162
doi	https://doi.org/10.52842/conf.caadria.2018.1.153
summary	A primary challenge for the application of an evolutionary process as a design tool is the ability to maintain variation amongst design solutions while simultaneously increasing in fitness. The 'golden rule' of balancing exploration versus exploitation of solutions within the population becomes more critical when the solution set is required to present a controlled degree of phenotypic variation but ensure that convergence of the solution set continues towards increased levels of fitness. The experiments presented within this paper address the control of variation throughout the simulation by means of incorporating a population-based fitness criterion that is utilised as a fitness objective and is calculated dynamically throughout the algorithmic run in both single and multi objective design problems.
keywords	Architecture; Computation ; Evolution; Urban; Variation
series	CAADRIA
email
last changed	2022/06/07 07:59

For more results click below: