Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 628

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2018_344
id	ecaade2018_344
authors	El-Gewely, Noor, Wong, Christopher, Tayefi, Lili, Markopoulou, Areti, Chronis, Angelos and Dubor, Alexandre
year	2018
title	Programming Material Intelligence Using Food Waste Deposition to Trigger Automatic Three-Dimensional Formation Response in Bioplastics
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 271-278
doi	https://doi.org/10.52842/conf.ecaade.2018.2.271
summary	Bioplastics are by their very nature parametric materials, programmable through the selection of constituent components and the ratios in which they appear, and as such present significant potential as architectural building materials for reasons beyond sustainability and biodegradability. This paper presents a system through which rigid three-dimensional doubly curved hyperbolic paraboloid shapes are automatically formed from two-dimensional sheet casts by harnessing the inherent flexibility and expressiveness of bioplastics. The system uses a gelatin-based bioplastic supplemented with granular organic matter from food waste in conjunction with a split-frame casting system that enables the self-formation of three-dimensional geometries by directing the force of the bioplastic's uniform contraction as it dries. By adjusting the food waste added to the bioplastic, its properties can be tuned according to formal and performative needs; here, dehydrated granulated orange peel and dehydrated spent espresso-ground coffee are used both to impart their inherent characteristics and also to influence the degree of curvature of the resulting bioplastic surfaces. Multi-material casts incorporating both orange peel bioplastic and coffee grounds bioplastic are shown to exert a greater influence over the degree of curvature than either bioplastic alone, and skeletonized panels are shown to exhibit the same behavior as their solid counterparts. Potential developments of the technology so as to gain greater control of the curvature performance, particularly in the direction of computer-controlled additive manufacturing, are considered, as is the potential of application in architectural scale.
keywords	Bioplastics; Composites; Fabrication; Materials
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2018_343
id	caadria2018_343
authors	Kalantar, Negar and Borhani, Alireza
year	2018
title	Informing Deformable Formworks - Parameterizing Deformation Behavior of a Non-Stretchable Membrane via Kerfing
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 339-348
doi	https://doi.org/10.52842/conf.caadria.2018.2.339
summary	The process for constructing freeform buildings composed of many non-repetitive shapes and waste-free formwork systems remains relatively unexplored. This research reviews a method for fabricating complex double-curved shapes without utilizing single-use formworks. This work answers questions regarding the manufacturing of these shapes in an environmentally-friendly and economic fashion. The proposed method, called a "transformative formwork," could replace state-of-the-art CNC-milled molds and is potentially suitable for large-scale construction. The transformative formwork uses a stretchable membrane or "interpolation layer" that can be manipulated into any curved surface by using vertical bars capable of being rearranged into different heights. Here, to accurately generate most of the smooth, double-curved surfaces, laser kerfing is used for bending interpolation layer into almost any complex shape. A parametric model simplifies local or global changes to the density of the kerfing patterns, modifying the deformation behavior of the layer. Several kerfed interpolation layers produced for four transformative formworks showed that the application of this method.
keywords	Transformative Formwork, Interpolation Layer, Relief-cut Patterns, Positive & Negative Gaussian Curvatures, Interlocking Archimedean Spiral-Patterns, Kerfing
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2018_234
id	ecaade2018_234
authors	Loh, Paul, Leggett, David and Prohasky, Daniel
year	2018
title	CNC Adjustable Mould to Eliminate Waste in Concrete Casting
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 735-742
doi	https://doi.org/10.52842/conf.ecaade.2018.1.735
summary	Fabricating complex curvature in concrete panel typically required unique one-off formwork which is usually computer numerically controlled (CNC) milled, generating enormous waste as a by-product. What if, we can produce complex curvature in concrete with minimal or no immediate construction waste? This paper presents a novel machine designed by a team of architects and engineer to eliminate waste in concrete casting. Using a hyperbolic paraboloid geometric model, the machine produces variable shape using a single mould design reducing waste and cost to the casting process. The paper discussed the design framework of the system and its fabrication workflow. The outcome is digitally scanned and verified to satisfy industry standard. The paper concludes by reviewing the application of the system and highlighting the need for future research into digital fabrication and design that is less wasteful and waste conscious to better the process of constructing our built environment.
keywords	Digital fabrication; Concrete casting; Adjustable mould
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia18_404
id	acadia18_404
authors	Clifford, Brandon; McGee, Wes
year	2018
title	Cyclopean Cannibalism. A method for recycling rubble
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 404-413
doi	https://doi.org/10.52842/conf.acadia.2018.404
summary	Each year, the United States discards 375 million tons of concrete construction debris to landfills (U.S. EPA 2016), but this is a new paradigm. Past civilizations cannibalized their constructions to produce new architectures (Hopkins 2005). This paper interrogates one cannibalistic methodology from the past known as cyclopean masonry in order to translate this valuable method into a contemporary digital procedure. The work contextualizes the techniques of this method and situates them into procedural recipes which can be applied in contemporary construction. A full-scale prototype is produced utilizing the described method; demolition debris is gathered, scanned, and processed through an algorithmic workflow. Each rubble unit is then minimally carved by a robotic arm and set to compose a new architecture from discarded rubble debris. The prototype merges ancient construction thinking with digital design and fabrication methodologies. It poses material cannibalism as a means of combating excessive construction waste generation.
keywords	full paper, cyclopean, algorithmic, robotic fabrication, stone, shape grammars, computation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	acadia18_88
id	acadia18_88
authors	Jahn, Gwyllim; Newnham, Cameron; Beanland, Matthew
year	2018
title	Making in Mixed Reality. Holographic design, fabrication, assembly and analysis of woven steel structures
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 88-97
doi	https://doi.org/10.52842/conf.acadia.2018.088
summary	The construction industry’s reliance on two-dimensional documentation results in inefficiency, inconsistency, waste, human error, and increased cost, and limits architectural experimentation with novel form, structure, material or fabrication approaches. We describe a software platform that enables designers to create interactive holographic instructions that translate design models into intelligent processes rather than static drawings. A prototypical project to design and construct a pavilion from bent mild steel tube illustrates the use of this software to develop applications assisting with the design, fabrication, assembly and analysis of the structure. We further demonstrate that fabrication within mixed reality environments can enable unskilled construction teams to assemble complex structures in short time frames and with minimal errors, and outline possibilities for further improvements.
keywords	full paper, vr/ar/mr, digital fabrication, digital craft
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	acadia20_164p
id	acadia20_164p
authors	Lange, Christian; Ratoi, Lidia; Co Lim, Dominic; Hu, Jason; Baker, David M.; Yu, Vriko; Thompson, Phil
year	2020
title	Reformative Coral Habitats
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 164-169
summary	Coral reefs are some of the most diverse ecologies in the marine world. They are the habitat to tens of thousands of different marine species. However, these wildlife environments are endangered across the globe. Recent research estimates that around 75 percent of the remaining coral reefs are currently under threat. In 2018 after a devastating storm, Hong Kong lost around 80% of its existing corals. Consequently, a team consisting of marine biologists and architects at The University of Hong Kong has developed a series of performative structures that have been deployed in the city's waters in July 2020, intending to aid new coral growth over the coming years. The project was commissioned by the Agriculture, Fisheries, and Conservation Department (AFCD) and is part of an ongoing active management measure for coral restoration in Hoi Ha Wan Marine Park in Hong Kong. The following objectives were defined as part of the design and fabrication research of the project. To develop a design strategy that builds on the concept of biomimicry to allow for complex spaces to occur that would provide attributes against the detachment of the inserted coral fragment, hence could enhance a diverse marine life specific to the context of the cities water conditions. To generate an efficient printing path that accommodates the specific morphological design criteria and ensures structural integrity and the functional aspects of the design. To develop an efficient fabrication process with a DIW 3D printing methodology that considers warping, shrinkage, and cracking in the clay material. The research team developed a method that combined an algorithmic design approach for the design of different geometries with a digital additive manufacturing process utilizing robotic 3D clay printing. The overall fabrication strategy for the complex and large pieces sought to ensure structural longevity, optimize production time, and tackle the involved double-sided printing method. Overall, 128 tiles were printed, covering roughly 40sqm of the seabed.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	acadia20_574
id	acadia20_574
authors	Nguyen, John; Peters, Brady
year	2020
title	Computational Fluid Dynamics in Building Design Practice
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 574-583.
doi	https://doi.org/10.52842/conf.acadia.2020.1.574
summary	This paper provides a state-of-the-art of computational fluid dynamics (CFD) in the building industry. Two methods were used to find this new knowledge: a series of interviews with leading architecture, engineering, and software professionals; and a series of tests in which CFD software was evaluated using comparable criteria. The paper reports findings in technology, workflows, projects, current unmet needs, and future directions. In buildings, airflow is fundamental for heating and cooling, as well as occupant comfort and productivity. Despite its importance, the design of airflow systems is outside the realm of much of architectural design practice; but with advances in digital tools, it is now possible for architects to integrate air flow into their building design workflows (Peters and Peters 2018). As Chen (2009) states, “In order to regulate the indoor air parameters, it is essential to have suitable tools to predict ventilation performance in buildings.” By enabling scientific data to be conveyed in a visual process that provides useful analytical information to designers (Hartog and Koutamanis 2000), computer performance simulations have opened up new territories for design “by introducing environments in which we can manipulate and observe” (Kaijima et al. 2013). Beyond comfort and productivity, in recent months it has emerged that air flow may also be a matter of life and death. With the current global pandemic of SARS-CoV-2, it is indoor environments where infections most often happen (Qian et al. 2020). To design architecture in a post-COVID-19 environment will require an in-depth understanding of how air flows through space.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia18_342
id	acadia18_342
authors	Wu, Kaicong; Kilian, Axel
year	2018
title	Robotic Equilibrium: Scaffold Free Arch Assemblies
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 342-349
doi	https://doi.org/10.52842/conf.acadia.2018.342
summary	Compression only arch structures are structurally highly efficient in force equilibrium. However, the material efficiency is offset by the traditional use of scaffolds to position materials and counter the out of equilibrium forces during assembly. We introduce a method of sequentially assembling compression only structures without a scaffold by robotically maintaining the compression equilibrium in every step. A two-arm collaborative robotic setup was used to maintain force equilibrium throughout arch assembly with the arms taking turns first hot wire cutting and placing blocks and providing a temporary scaffold to support the arch end point. To test the approach, a single catenary arch was generated using form-finding techniques and sequentially built from foam blocks. Moving forward we show the relationship between the joint valence (largest number of joined branches) of a multi-branched structure and the minimum number of robotic arms required for assembly using our initial technique. With only two robotic arms available, the technique was further developed to reduce the required number of arms per arch branch from two to one by attaching caterpillar tracks at the block supporting end effector. This allows a human to load the next block and the arm to move forward along the arch while maintaining equilibrium. Results show that robotic equilibrium scaffold free arch assembly is possible and can reduce scaffold waste and maintain the material efficiency of compression only structures. Future work will explore further applications of assistive robotics in construction replacing static construction aids with dynamic sensory feedback of equilibrium forces.
keywords	work in progress, collaborative sequential assembly, robotic equilibrium, compression only structures, form finding
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	acadia23_v3_157
id	acadia23_v3_157
authors	C Niquille, Simone
year	2023
title	Model Home
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	Well, hello. Thanks for having me. Hopefully, not everyone is too exhausted. But we'll get through it. So, you know, in some ways I feel like a guest, an intruder -- there's different words -- to a conference such as this. I am trained as a graphic designer and a photographer. But somehow, you know, I find myself between disciplines. And one of them is architecture. What we will talk about today is a project that started around 2018 called ""Model Home"", which is sort of the larger chapter. Most of the work I do is either in writing essays, as well as film. There's not enough time to show the film today, but if you are interested, just come and ask me after.
series	ACADIA
type	keynote
email
last changed	2024/04/17 13:59

_id	ecaade2018_255
id	ecaade2018_255
authors	Danesh, Foroozan, Baghi, Ali and Kalantari, Saleh
year	2018
title	Programmable Paper Cutting - A Method to Digitally Fabricate Transformable, Complex Structural Geometry
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 489-498
doi	https://doi.org/10.52842/conf.ecaade.2018.2.489
summary	This paper presents a computational approach to generating architectural forms for large spanning structures based on a "paper-cutting" technique. Using this approach, a flat sheet is cut and scored in such a way that a small application of force prompts it to expand into a three-dimensional structure. Our computational system can be used to estimate optimal cutting patterns and to predict the resulting structural characteristics, thereby providing greater rigor to what has previously been an ad-hoc and experimental design approach. To develop the model, we analyzed paper-cutting techniques, extracted the relevant formative parameters, and created a simulation using finite element analysis. We then used a data-mining approach through 400 simulations and applied a regression analysis to create a prediction model. Given a small number of input variables from the designer, this model can rapidly and precisely predict the transformation volume of a paper-cutting pattern. Additional structural characteristics will be modelled in future work. The use of this tool makes paper-cut design approaches more practical by changing a non-systematic, labor-intensive design process into a more precise and efficient one.
keywords	Paper-cut?; Transformable geometry; Design method; Model prediction; Data mining; Regression analysis
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2022_398
id	ecaade2022_398
authors	Dzurilla, Dalibor and Achten, Henri
year	2022
title	What’s Happening to Architectural Sketching? - Interviewing architects about transformation from traditional to digital architectural sketching as a communicational tool with clients
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 389–398
doi	https://doi.org/10.52842/conf.ecaade.2022.1.389
summary	The paper discusses 23 interviewed architects in practice about the role of traditional and digital sketching (human-computer interaction) in communication with the client. They were selected from 1995 to 2018 (the interval of graduation) from three different countries: the Czech Republic (CR), Slovakia (SR), Netherland (NR). To realize three blending areas that impact the approach to sketching: (I) Traditional hand and physical model studies (1995-2003). (II)Transition form - designing by hand and PC (2004–2017). (III) Mainly digital and remote forms of designing (2018–now). Interviews helped transform 31 “parameters of tools use” from the previous theoretical framework narrowed down into six main areas: (1) Implementation; (2)Affordability; (3)Timesaving; (4) Drawing support; (5) Representativeness; (6) Transportability. Paper discusses findings from interviewees: (A) Implementation issues are above time and price. (B) Strongly different understanding of what digital sketching is. From drawing in Google Slides by mouse to sketching in Metaverse. (C) Substantial reduction of traditional sketching (down to a total of 3% of the time) at the expense of growing responsibilities. (D) 80% of respondents do not recommend sketching in front of the client. Also, other interesting findings are further described in the discussion.
keywords	Architectural Sketch, Digital Sketch, Effective Visual Communication
series	eCAADe
email
last changed	2024/04/22 07:10

_id	acadia18_206
id	acadia18_206
authors	Farahi, Behnaz
year	2018
title	HEART OF THE MATTER: Affective Computing in Fashion and Architecture
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 206-215
doi	https://doi.org/10.52842/conf.acadia.2018.206
summary	What if material interfaces could physically adapt to the user’s emotional state in order to develop a new affective interaction? By using emotional computing technologies to track facial expressions, material interfaces can help to regulate emotions. They can serve either as a tool for intelligence augmentation or as a means of leveraging an empathic relationship by developing an affective loop with the user. This paper explores how color- and shape-changing operations can be used as interactive design tools to convey emotional information, and is illustrated by two projects, one at the intimate scale of fashion and one at a more architectural scale. By engaging with design, art, psychology, and computer and material science, this paper envisions a world where material systems can detect the emotional responses of a user and reconfigure themselves in order to enter into a feedback loop with the user’s affective state and influence social interaction.
keywords	full paper, materials & adaptive systems, materials/adaptive systems, computation.
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	ecaade2018_392
id	ecaade2018_392
authors	Gargaro, Silvia, Cigola, Michela, Gallozzi, Arturo and Fioravanti, Antonio
year	2018
title	Cultural Heritage Knowledge Context - A model based on Collaborative Cultural approach
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 205-214
doi	https://doi.org/10.52842/conf.ecaade.2018.2.205
summary	Cultural Heritage is a wide concept. It's what remains of the past generations Cultural Heritage includes tangible culture (such as buildings, monuments, landscapes, books, works of art and artifacts), intangible culture (such as folklore, music, traditions, language and knowledge) and natural heritage (including culturally significant landscapes, and biodiversity). A good preservation, restauration and valorization of Cultural Heritage embraces tangible and intangible culture, actually not evaluated in an holistic way.Cultural Heritage is not only an historical memory of the past, but the mirror of an anthropological reality that characterizes our personal and collective identity within a cultural context. The question is: How can we take into account these thought categories? The model proposed would be an used methodology to analyze the model for data acquisition, processing, modeling and implementation of knowledge on culture and social context through ontologies. The purpose of the research is to analyze the relationship between Cultural Context and Cultural Heritage.The contribution proposes an original approach to Cultural Heritage based on a social and cultural approach, transforming the user as an actor for the acquisition of raw data and cultural knowledge, applying the model to the Archaeological Complex of Casinum, in South Latium.
keywords	Cultural Heritage; Context Knowledge; Intangible Knowledge; Ontologies; Human Behavior Constraints
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2018_284
id	ecaade2018_284
authors	Hochscheid, Elodie and Halin, Gilles
year	2018
title	BIM Implementation in Architecture Firms - Interviews, case studies and action research used to build a method that facilitates implementation of BIM processes and tools
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 231-240
doi	https://doi.org/10.52842/conf.ecaade.2018.1.231
summary	Building Information Modeling/Management (BIM) is an emerging technological and procedural shift within the AEC industry. In this paper, we describe how we used interviews, case studies and action research to collect information on how implementation of BIM is made in architecture firms. Hypotheses on what facilitates BIM implementation in these firms are drawn.
keywords	BIM implementation; architecture firms; method; action research; interviews; case studies
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia23_v3_169
id	acadia23_v3_169
authors	Kanngieser, AM
year	2023
title	Ethics and Ecocidal Listening: Oceanic Refractions as an Artistic Case Study
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	In 2018 I was invited to visit the archipelago of Kiribati, located in the Pacific Ocean around 1000 miles from Hawaii. A big ocean state, Kiribati holds a land mass of around 315 sq. miles and an oceanic economic zone of 1,328,890 sq. mi. Tarawa, the most inhabited of the islands peaks at around 3 m above sea level. I went to Kiribati in part to meet with Dr Teweiariki Teaero, a renowned scholar, poet and educator who had directed the Oceania Center at the University of the South Pacific in Fiji for many years before returning to his homeland where at the time he had been planning on running for government. Teweiariki spoke with me at length about the status of Kiribati as one of the already most critically affected frontline nations. I asked him what was a lesson for non-Pacific Islanders to learn about understanding everyday life there. He said to me “Two ears, one mouth, don’t talk too much. Learn to listen more. Not only to hear, but to be able to develop another thing and that is to be able to interpret. These things are different, they occur at different levels. The hearing and the interpretation of the sound…it’s very much part of our world” (Teaero 2018).
series	ACADIA
type	keynote
email
last changed	2024/04/17 14:00

_id	ecaade2018_001
id	ecaade2018_001
authors	Kepczynska-Walczak, A, Bialkowski, S (eds.)
year	2018
title	Computing for a better tomorrow, Volume 2
source	Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, 860 p.
doi	https://doi.org/10.52842/conf.ecaade.2018.2
summary	The theme of the 36th eCAADe Conference is Computing for a better tomorrow. When we consider the aims of research activities, design efforts and mastering towards ideal solutions in the area of digital technologies in the built environment, such as CAD, CAM, CAE, BIM, FM, GIS, VR, AR and others, we may realise the actual reason for that is to make life better, healthier, prettier, happier, more sustainable and smarter. The usefulness of undertaken studies might be tested and proved by the noticeable shared approach of putting humans and their environments in a central position: man and the environment, nature and design, art and technology... Natural disasters and climate change, crime and terrorism, disabilities and society ageing - architects, designers and scientists active in the built environment domain are not able to eliminate all the risk, dangers and problems of contemporary world. On the other hand, they have social and moral responsibilities to address human needs and take up this multifaceted challenge. It involves a co-operation and, moreover, an interdisciplinary and user-oriented approach. The complexity of raised problems should not discourage us, on the contrary, it should stimulate activities towards living up to human dreams of a better and sustainable tomorrow. This calls for a revision of methods and tools applied in research, teaching and practice. Where are we? What are the milestones and roadmaps at the end of the second decade of the 21st century? Do we really take the most of the abundance of accumulated knowledge? Or we skip to explore another undiscovered domains? We invited academicians, researchers, professionals and students from all over the world to address the multifaceted notions of using computing in architectural and related domains for developing a better tomorrow. Approaches discussing the theme from the perspective of computer aided design education; design processes and methods; design tool developments; and novel design applications, as well as real world experiments and case studies were welcomed. In order to specifically address some of the questions above, we defined subthemes and organised specific sessions around these subthemes, during the conference as well as in the proceedings.
series	eCAADe
last changed	2022/06/07 07:49

_id	ecaade2018_156
id	ecaade2018_156
authors	Kovacs, Adam Tamas and Micsik, András
year	2018
title	Building Information Dashboard as Decision Support during Design Phase
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 281-288
doi	https://doi.org/10.52842/conf.ecaade.2018.1.281
summary	This paper discusses the Building Information Dashboard, a data representation method which provides a solid basis for decision-makers to make optimal decisions during the design phase of an Architecture, Engineering, and Construction project. We describe an example project workflow where the dashboard is integrated. We sum up the evaluation method, which is the basis of the dashboard, and we research what type of visualization method is best suited to representing this type of data. To this end, an evaluation matrix was created to compare the alternative charts. We take into account what kind of information such a dashboard should represent and what kind of features it should have. We suggest layouts for different use cases - both for professional and non-professional decision-makers, as well as for discipline designers.
keywords	BIM; dashboard; decision support; data visualization; data analytics
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia18_20
id	acadia18_20
authors	Leach, Neil
year	2018
title	We Have Never Been Digital
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 20-29
doi	https://doi.org/10.52842/conf.acadia.2018.020
summary	The recent debate about the nature of the “postdigital” prompts the question as to whether we have ever been digital. This article looks at Bruno Latour’s book We Have Never Been Modern (1993) and questions whether its logic could not also be transferred to the realm of the digital. The issue is not so much that much of what is called “digital” in fact refers to analog processes that are simply controlled by the digital. Nor is it simply that we are often not aware of what has been “digitally” produced. Rather, the issue is that many of our operations within the digital realm are still controlled by the designer and do not operate within an autonomous realm. The notion of a purely objective digital operation without any subjective intervention on the part of the designer is something of a myth. The paper concludes that we have never been digital, just as we have never been modern. As such, we might argue that the term “postdigital” makes little sense, in that we have never been digital in the first place.
keywords	full paper, hybrid practices, history/theory of computation, design history and theory
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	ijac201816202
id	ijac201816202
authors	Tamke, Martin; Paul Nicholas and Mateusz Zwierzycki
year	2018
title	Machine learning for architectural design: Practices and infrastructure
source	International Journal of Architectural Computing vol. 16 - no. 2, 123-143
summary	In this article, we propose that new architectural design practices might be based on machine learning approaches to better leverage data-rich environments and workflows. Through reference to recent architectural research, we describe how the application of machine learning can occur throughout the design and fabrication process, to develop varied relations between design, performance and learning. The impact of machine learning on architectural practices with performance-based design and fabrication is assessed in two cases by the authors. We then summarise what we perceive as current limits to a more widespread application and conclude by providing an outlook and direction for future research for machine learning in architectural design practice.
keywords	Machine learning, robotic fabrication, design-integrated simulation, material behaviour, feedback, Complex Modelling
series	journal
email
last changed	2019/08/07 14:03

_id	acadia18_394
id	acadia18_394
authors	Adel, Arash; Thoma, Andreas; Helmreich, Matthias; Gramazio, Fabio; Kohler, Matthias
year	2018
title	Design of Robotically Fabricated Timber Frame Structures
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 394-403
doi	https://doi.org/10.52842/conf.acadia.2018.394
summary	This paper presents methods for designing nonstandard timber frame structures, which are enabled by cooperative multi-robotic fabrication at building-scale. In comparison to the current use of automated systems in the timber industry for the fabrication of plate-like timber frame components, this research relies on the ability of robotic arms to spatially assemble timber beams into bespoke timber frame modules. This paper investigates the following topics: 1) A suitable constructive system facilitating a just-in-time robotic fabrication process. 2) A set of assembly techniques enabling cooperative multi-robotic spatial assembly of bespoke timber frame modules, which rely on a man-machine collaborative scenario. 3) A computational design process, which integrates architectural requirements, fabrication constraints, and assembly logic. 4) Implementation of the research in the design and construction of a multi-story building, which validates the developed methods and highlights the architectural implications of this approach.
keywords	full paper, fabrication & robotics, generative design, computation, timber architecture
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

For more results click below: