Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 15 of 15

Reformat results as: short short into frame detailed detailed into frame

_id	acadia21_70
id	acadia21_70
authors	McAndrew, Claire; Jaschke, Clara; Retsin, Gilles; Saey, Kevin; Claypool, Mollie; Parissi, Danaë
year	2021
title	House Block
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 70-75.
doi	https://doi.org/10.52842/conf.acadia.2021.070
summary	House Block was a temporary housing prototype in East London, UK from April to May 2021. The project constituted the most recent in a series of experiments developing Automated Architecture (AUAR) Labs’ discrete framework for housing production, one which repositions the architect as curator of a system and enables participants to engage with active agency. Recognizing that there is a knowledge gap to be addressed for this reconfiguration of practices to take form, this project centred on making automation and its potential for local communities tangible. This sits within broader calls advocating for a more material alignment of inclusive design with makers and 21st Century making in practice (see, for example, Luck 2018). House Block was designed and built using AUAR’s discrete housing system consisting of a kit of parts, known as Block Type A. Each block was CNC milled from a single sheet of plywood, assembled by hand, and then post-tensioned on site. Constructed from 270 identical blocks, there are no predefined geometric types or hierarchy between parts. The discrete enables an open-ended, adaptive system where each block can be used as a column, floor slab, wall, or stair—allowing for disconnection, reconfiguration, and reassembly (Retsin 2019). The democratisation of design and production that defines the discrete creates points for alternative value systems to enter, for critical realignments in architectural production.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	acadia19_532
id	acadia19_532
authors	Retsin, Gilles
year	2019
title	Toward Discrete Architecture: Automation Takes Command
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 532-541
doi	https://doi.org/10.52842/conf.acadia.2019.532
summary	This paper describes a framework for discrete computational design and fabrication in the context of automation. Whereas digital design and fabrication are technical notions, automation immediately has societal and political repercussions. Automation relates to industrialization and mechanisation—allowing to historically reconnect the digital while bypassing the post-modern, deconstructivist, or parametric decades. Using a series of built prototypes making use of timber, this paper will describe how the combined technologies of automation and discreteness enable both technical efficiencies and new architectural interest. Both projects are based on timber sheet materials, cut and folded into larger elements that are then assembled into functional structures. Both projects are also fragments of larger housing blocks. Discrete building blocks are presented from a technical perspective as occupying a space in between programmable matter and modular prefabrication. Timber is identified as an ideal material for automated discrete construction. From an architectural perspective, the paper discusses the implications of an architecture based on parts that remain autonomous from the whole.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	caadria2020_093
id	caadria2020_093
authors	Cerovsek, Tomo and Martens, Bob
year	2020
title	The Evolution of CAADRIA Conferences - A Bibliometric Approach
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 325-334
doi	https://doi.org/10.52842/conf.caadria.2020.1.325
summary	This paper presents an analysis of the output, impact, use and content of 1,860 papers that were published in the CAADRIA conference proceedings over the last 20+ years (from 1996 to 2019). The applied methodology is a blend of bibliometrics, webometrics and clustering with text mining. The bibliometric analysis leads to quantitative and qualitative results on three levels: (1) author, (2) article and (3) association. The most productive authors authored over 50 papers, and the top 20% authors have over 80 % of all citations generated by CAADRIA proceedings. The overall impact of CAADRIA may be characterised by nearly 2,000 known citations and by the h-index that is 17. The webometrics based on CumInCAD.org reveals that the CAADRIA papers served over 200 k users, which is a considerable visibility for scientific CAAD output. The keywords most frequently used by authors were digital fabrication, BIM and parametric, generative, computational design. Notably, 90% of the papers' descriptors are 2-grams. This study may be useful to researchers, educators and publishers interested in CAAD.
keywords	bibliometrics; open source; text clustering; n-gram
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaadesigradi2019_250
id	ecaadesigradi2019_250
authors	Czyñska, Klara
year	2019
title	Visual Impact Analysis of Large Urban Investments on the Cityscape
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 297-304
doi	https://doi.org/10.52842/conf.ecaade.2019.3.297
summary	The article presents the assessment method for large (horizontally spread) urban investment and its visual impact on the cityscape using digital analyses. The visual impact assessment is often used in relation to facilities which dominate in the cityscape, mainly tall buildings. Various studies, however, examine the impact of wide but relatively low-rising buildings and their impact on the cityscape. The article presents a methodology for the assessment of the visual impact and a case study for a building facility comprising several tightly developed and medium height blocks of buildings in a city center of a significant historical value in Gdañsk, Poland. The research has been based on the Visual Impact Size method (VIS) and a city model consisting of a regular cloud of points (Digital Surface Model). The simulation has been developed using a dedicated C++ software (developed by author). The study aimed at assessing the following: a) to what degree such an urban investment can influence the cityscape; b) how the impact can be analyzed using digital techniques, and c) what input parameters of the analysis are crucial for satisfactory accuracy of its results.
keywords	digital cityscape analysis; urban skyline; large urban investments; visual impact; VIS method
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	acadia20_192p
id	acadia20_192p
authors	Doyle, Shelby; Hunt, Erin
year	2020
title	Melting 2.0
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 192-197
summary	This project presents computational design and fabrication methods for locating standard steel reinforcement within 3D printed water-soluble PVA (polyvinyl alcohol) molds to create non-standard concrete columns. Previous methods from “Melting: Augmenting Concrete Columns with Water Soluble 3D Printed Formwork” and “Dissolvable 3D Printed Formwork: Exploring Additive Manufacturing for Reinforced Concrete” (Doyle & Hunt 2019) were adapted for larger-scale construction, including the introduction of new hardware, development of custom programming strategies, and updated digital fabrication techniques. Initial research plans included 3D printing continuous PVA formwork with a KUKA Agilus Kr10 R1100 industrial robotic arm. However, COVID-19 university campus closures led to fabrication shifting to the author’s home, and this phase instead relied upon a LulzBot TAZ 6 (build volume of 280 mm x 280 mm x 250 mm) with an HS+ (Hardened Steel) tool head (1.2 mm nozzle diameter). Two methods were developed for this project phase: new 3D printing hardware and custom GCode production. The methods were then evaluated in the fabrication of three non-standard columns designed around five standard reinforcement bars (3/8-inch diameter): Woven, Twisted, Aperture. Each test column was eight inches in diameter (the same size as a standard Sonotube concrete form) and 4 feet tall, approximately half the height of an architecturally scaled 8-foot-tall column. Each column’s form was generated from combining these diameter and height restrictions with the constraints of standard reinforcement placement and minimum concrete coverage. The formwork was then printed, assembled, cast, and then submerged in water to dissolve the molds to reveal the cast concrete. This mold dissolving process limits the applicable scale for the work as it transitions from the research lab to the construction site. Therefore, the final column was placed outside with its mold intact to explore if humidity and water alone can dissolve the PVA formwork in lieu of submersion.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	ecaadesigradi2019_357
id	ecaadesigradi2019_357
authors	Gönenç Sorguç, Arzu, Özgenel, Ça?lar F?rat, Kruºa Yemiºcio?lu, Müge, Küçüksubaº?, Fatih, Y?ld?r?m, Soner, Antonini, Ernesto, Bartolomei, Luigi, Ovesen, Nis and Stein?, Nicolai
year	2019
title	STEAM Approach for Architecture Education
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 137-146
doi	https://doi.org/10.52842/conf.ecaade.2019.1.137
summary	Starting with the first founded university, higher education has been evolving continuously, yet the pace of this evolution is not as fast as the changes that we observe in practice. Today, this discrepancy is not only limited to the content of the curricula but also the expected skills and competencies. It is evident that 21st-century skills and competencies should be much different than the ones delivered in the 20th-century due to rapidly developing and spreading new design and information technologies. Each and every discipline has been in continuous search of the "right" way of formalization of education both content and skill wise. This paper focuses on architectural design education incorporating discussions on the role of STEAM (Science Technology, Engineering, Art and Mathematics). The study presents the outcomes of the ArchiSTEAM project, which is funded by EU Erasmus+ Programme, with the aim of re-positioning STEAM in architectural design education by contemplating 21st-century skills (a.k.a. survival skills) of architects. Three educational modules together with the andragogic approaches, learning objectives, contents, learning/teaching activities and assessment methods determined with respect to the skill sets defined for 21st-century architects.
keywords	STEAM; Architectural Education; Survival Skills
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:50

_id	cf2019_008
id	cf2019_008
authors	Han, Zhen; Ning Cao, Gang Liu and Wei Yan
year	2019
title	MOPSO for BIM: A Multi-Objective Optimization Tool Using Particle Swarm Optimization Algorithm on a BIMbased Visual Programming Platform
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 39-51
summary	With the increasing applications of computational methods in the field of design optimization, intelligent metaheuristic algorithms are playing a more important role in building performance optimization. To enable the integration of optimization algorithms with Building Information Modeling (BIM), this research implemented the Particle Swarm Optimization (PSO) algorithm on Revit + Dynamo, which is a parametric BIM platform. A MultiObjective PSO (MOPSO) Solver has been developed in Dynamo using MATLAB and C# programming languages. The methodology of the research and the validation studies are presented in the paper. The validation studies prove the effectiveness of the MOPSO Solver for both standard optimization test functions and an optimization example of a simplified building design.
keywords	Particle Swarm Optimization, BIM, multi-objective optimization, visual programming
series	CAAD Futures
email
last changed	2019/07/29 14:08

_id	ecaadesigradi2019_307
id	ecaadesigradi2019_307
authors	Kovacs, Adam Tamas, Szoboszlai, Mihaly and Csusz, Istvan
year	2019
title	Key for Entering Industry 4.0 in the AEC Sector - BIM Organisation Development
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 275-282
doi	https://doi.org/10.52842/conf.ecaade.2019.1.275
summary	More and more sectors are entering Industry 4.0 but when we look around in the Architecture, Engineering and Construction industry, we do not see it happening. We wanted to investigate the reason behind this. Therefore, we conducted research among Hungarian design studios to find out what level of development they are at, and what the obstacles could be for implementing the latest technologies. This paper identifies the main problem we uncovered and discusses a possible solution. We explain what BIM Organisation Development is and why it is fundamental for architect studios who would like to enter Industry 4.0. We introduce the so-called Brick+Data Method, specifying its three essential development steps to get BIM technologies implemented and to make architect studios more efficient. Finally, we share our findings according to the feedback of the companies we worked with using this method.
keywords	BIM; organisation development; technology implementation; Industry 4.0; design process
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	caadria2019_671
id	caadria2019_671
authors	Mun, Kristine, Clemenson, Dane and Bogosian, Biayna
year	2019
title	The Well Tempered Environment of Experience - (Neuro)Scientific Methods for Data Collection, Analysis & Visualization
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 573-582
doi	https://doi.org/10.52842/conf.caadria.2019.1.573
summary	In our ever increasing media(ted) world, the robustness of digital communication networked environment is transforming how we relate to our environment. With the rise of the Internet of Things (IOTs) and other ubiquitous mobile communication devices connecting our bodies to our environments, our spaces are requiring a recalibration of the 'well tempered environment'. As technological devices are becoming seamlessly fused with our everyday lifestyles, habits and spaces, articulating experience is one of the most important topics to discuss in human-centered approach to design. This paper presents the initial methods for a data-driven process to enhance human experience as the central motivation. Combining knowledge from neuroscience and experimenting with embodied medias such as Virtual and Augmented Reality (+ MR) , the inquiries into the human dimension is explored in novel ways. The aim is to show how data-driven experiments could be used to assist designers find better performative solutions and that new collaborations between scientist and designers are on the rise as data moves fluidly between bodies and spaces like air in our 21st century.
keywords	Experience Design; Human-Computer-Interface; Emotion; Neuroscience; VR, AR & Mixed Reality, Human Centered Design, Data-Driven Design; Interactivity
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaadesigradi2019_568
id	ecaadesigradi2019_568
authors	Rubinowicz, Pawe³
year	2019
title	Protection of the waterfront panoramas based on computational 3D-analysis
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 325-332
doi	https://doi.org/10.52842/conf.ecaade.2019.2.325
summary	The article presents the application of the Visual Protection Surface (VPS) method in protecting waterfront panoramas. The digital analysis of visual impact, which is most frequently used in urban planning, assesses the impact of new investment on the cityscape. The study presented in the article is based on a reverse approach -determining the maximum height of buildings so new facilities do not distort protected vistas in a city, vistas which are crucial for the preservation of the city's cultural identity and spatial identification. The assessment of the application is based on a case study of Gdañsk, Poland, where a 3D LiDAR model was used. The study involved the use of software developed by the author (C++). It also analyzed VPS input parameters. Conclusions can be used to assess and verify analysis findings with different software (GIS/CAD). The article shows the potential application of the VPS method in urban planning.
keywords	computational urban analyses; urban landscape protection; strategic views; tall buildings; 3D city models; VPS method
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	lasg_whitepapers_2019_291
id	lasg_whitepapers_2019_291
authors	Sabin, Jenny
year	2019
title	Lumen
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.291 - 318
summary	This paper documents the computational design methods, digital fabrication strategies, and generative design process for [Lumen], winner of MoMA & MoMA PS1’s 2017 Young Architects Program. The project was installed in the courtyard at MoMA PS1 in Long Island City, New York, during the summer of 2017. Two lightweight 3D digitally knitted fabric canopy structures composed of responsive tubular and cellular components employ recycled textiles, photo-luminescent and solar active yarns that absorb and store UV energy, change color, and emit light. This environment offers spaces of respite, exchange, and engagement as a 150 x 75-foot misting system responds to visitors’ proximity, activating fabric stalactites that produce a refreshing micro-climate. Families of robotically prototyped and woven recycled spool chairs provide seating throughout the courtyard. The canopies are digitally fabricated with over 1,000,000 yards of high tech responsive yarn and are supported by three 40+ foot tensegrity towers and the surrounding matrix of courtyard walls. Material responses to sunlight as well as physical participation are integral parts of our exploratory approach to the 2017 YAP brief. The project is mathematically generated through form-finding simulations informed by the sun, site, materials, program, and the material morphology of knitted cellular components. Resisting a biomimetic approach, [Lumen] employs an analogic design process where complex material behavior and processes are integrated with personal engagement and diverse programs. The comprehensive installation was designed by Jenny Sabin Studio and fabricated by Shima Seiki WHOLEGARMENT, Jacobsson Carruthers, and Dazian with structural engineering by Arup and lighting by Focus Lighting.
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	ecaadesigradi2019_315
id	ecaadesigradi2019_315
authors	Wurzer, Gabriel and Coraglia, Ugo Maria
year	2019
title	Refurb! - A tool allowing for iterative refurbishment
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 55-60
doi	https://doi.org/10.52842/conf.ecaade.2019.2.055
summary	Refurbishments and adaptations to existing building structures can be a challenging problem: Keeping track of all building measures (e.g. what walls, doors and installations to add or remove) is equally demanding as trying to keep an eye on the constraints (e.g. natural lighting) and functions that the changed structure will provide. It also demands a integrated view of the redesign (spatial aspect) and the refurbishment as a project (time aspect). To this end, we have been developing our planning tool "Refurb!", which lets a user plan refurbishments and adaptations to existing structures using a mixed metaphor of "CAD-tool + project plan", including a variety of analysis tools to compare the original state of a structure to the planned one (e.g. adjacency and circulation before and after adaptation). The tool is aimed at project planners and ranges from small scenarios (e.g. relocation/adaptation/refurbishment of a department) to big scenarios (e.g. relocation when bringing a hospital into service).
keywords	Refurbishment; Planning Tool; Cellular Automaton
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:57

_id	caadria2021_251
id	caadria2021_251
authors	Ma, Chun Yu and van Ameijde, Jeroen
year	2021
title	Participatory Housing: Discrete Design and Construction Systems for High-Rise Housing in Hong Kong
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 271-280
doi	https://doi.org/10.52842/conf.caadria.2021.1.271
summary	There has been a recent increase in the exploration of mereological systems, speculating on how digital design, assembly and reconfiguration of digital materials (Gershenfeld, 2015) enables digitally informed physical worlds that change over time. Besides opportunities for construction and design automation, there is a potential to reimagine how multiple stakeholders can participate in the computational decision-making process, using the benefits of the mass customization of logistics (Retsin, 2019). This paper presents a research-by-design project that applies a digital and discrete material system to high-rise housing in Hong Kong. The project has developed an integrated approach to design, construction, and inhabitation, using a system of discrete parts which can be assembled in various apartment configurations, to incorporate varying occupants requirements and facilitate negotiations and changes over time.
keywords	Participatory Design; Generative Design; Adaptable Architecture; High-rise Housing
series	CAADRIA
email
last changed	2022/06/07 07:59

No more hits.