Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	acadia20_192p
id	acadia20_192p
authors	Doyle, Shelby; Hunt, Erin
year	2020
title	Melting 2.0
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 192-197
summary	This project presents computational design and fabrication methods for locating standard steel reinforcement within 3D printed water-soluble PVA (polyvinyl alcohol) molds to create non-standard concrete columns. Previous methods from “Melting: Augmenting Concrete Columns with Water Soluble 3D Printed Formwork” and “Dissolvable 3D Printed Formwork: Exploring Additive Manufacturing for Reinforced Concrete” (Doyle & Hunt 2019) were adapted for larger-scale construction, including the introduction of new hardware, development of custom programming strategies, and updated digital fabrication techniques. Initial research plans included 3D printing continuous PVA formwork with a KUKA Agilus Kr10 R1100 industrial robotic arm. However, COVID-19 university campus closures led to fabrication shifting to the author’s home, and this phase instead relied upon a LulzBot TAZ 6 (build volume of 280 mm x 280 mm x 250 mm) with an HS+ (Hardened Steel) tool head (1.2 mm nozzle diameter). Two methods were developed for this project phase: new 3D printing hardware and custom GCode production. The methods were then evaluated in the fabrication of three non-standard columns designed around five standard reinforcement bars (3/8-inch diameter): Woven, Twisted, Aperture. Each test column was eight inches in diameter (the same size as a standard Sonotube concrete form) and 4 feet tall, approximately half the height of an architecturally scaled 8-foot-tall column. Each column’s form was generated from combining these diameter and height restrictions with the constraints of standard reinforcement placement and minimum concrete coverage. The formwork was then printed, assembled, cast, and then submerged in water to dissolve the molds to reveal the cast concrete. This mold dissolving process limits the applicable scale for the work as it transitions from the research lab to the construction site. Therefore, the final column was placed outside with its mold intact to explore if humidity and water alone can dissolve the PVA formwork in lieu of submersion.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	acadia19_576
id	acadia19_576
authors	García del Castillo y López, Jose Luis; Bechthold, Martin; Seibold, Zach; Mhatre, Saurabh; Alhadidi, Suleiman
year	2019
title	Janus Printing
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 576-585
doi	https://doi.org/10.52842/conf.acadia.2019.576
summary	The benefits of additive manufacturing technologies for the production of customized construction elements has been well documented for several decades. Multi-material additive manufacturing (MM-AM) enhances these capacities by introducing region-specific characteristics to printed objects. Several examples of the production of multi-material assemblies, including functionally-graded materials (FGMs) exist at the architectural scale, but none are known for ceramics. Factors limiting the development and application of this production method include the cost and complexity of existing MM-AM machinery, and the lack of a suitable computational workflow for the production of MM-AM ceramics, which often relies on a continuous linear toolpath. We present a method for the MM-AM of paste-based ceramics that allows for unique material expressions with relatively simple end-effector design. By borrowing methods of co-extrusion found in other industries and incorporating a 4th axis of motion into the printing process, we demonstrate a precisely controlled MM-AM deposition strategy for paste-based ceramics. We present a computational workflow for the generation of toolpaths, and describe full-body tiles and 3D artifacts that can be produced using this method. Future process refinements include the introduction of more precise control of material gradation and refinements to material composition for increased element functionality.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	ecaadesigradi2019_455
id	ecaadesigradi2019_455
authors	Moreira, Jo?o, Figueiredo, Bruno and Cruz, Paulo
year	2019
title	Ceramic Additive Manufacturing in Architecture - Computational Methodology for Defining a Column System
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 471-476
doi	https://doi.org/10.52842/conf.ecaade.2019.1.471
summary	The present paper describes a research that explores the design and production of customised architectural ceramic components defined through parametric relations of biomorphic inspiration and to be built through additive manufacturing. In this sense, is presented a case study that develops a system of both architectural and structural components - a column system. The definition process of the system is mediated by computational design, implementing not only structural analysis and optimization strategies, but also mimetic formal characteristics of nature to an initial grid, creating a model that adapts its formal attributes, depending on its assumptions and the material constraints. This process resulted in the definition of a set of solutions that better answer to a specific design problem.
keywords	Additive Manufacturing; Ceramic 3D; Computational Design; Structural Optimization; Biomorphism
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	ecaadesigradi2019_488
id	ecaadesigradi2019_488
authors	Naboni, Roberto and Kunic, Anja
year	2019
title	A computational framework for the design and robotic manufacturing of complex wood structures
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 189-196
doi	https://doi.org/10.52842/conf.ecaade.2019.3.189
summary	The emerging paradigm of Industry 4.0 is rapidly expanding in the AEC sector, where emergent technologies are offering new possibilities. The use of collaborative robots is enabling processes of advanced fabrication, where humans and robots coexist and collaborate towards the co-creation of new building processes. This paper focuses on setting a conceptual framework and a computational workflow for the design and assembly of a novel type of engineered wood structures. The aim is advancing timber construction through complex tectonic configurations, which are informed by logics of robotic assembly, topology and material optimization, and combinatorial design. Starting from the conceptualization of robotic layered manufacturing for timber structures, this work presents the development of a digital twin applied to the voxel-based design of complex timber structures.
keywords	Digital Materials; Robotic Assembly; Wood structures; Voxel-based design; Topology Optimization
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:59

_id	ecaadesigradi2019_280
id	ecaadesigradi2019_280
authors	Rossi, Gabriella and Nicholas, Paul
year	2019
title	Haptic Learning - Towards Neural-Network-based adaptive Cobot Path-Planning for unstructured spaces
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 201-210
doi	https://doi.org/10.52842/conf.ecaade.2019.2.201
summary	Collaborative Robots, or Cobots, bring new possibilities for human-machine interaction within the fabrication process, allowing each actor to contribute with their specific capabilities. However creative interaction brings unexpected changes, obstacles, complexities and non-linearities which are encountered in real time and cannot be predicted in advance. This paper presents an experimental methodology for robotic path planning using Machine Learning. The focus of this methodology is obstacle avoidance. A neural network is deployed, providing a relationship between the robot's pose and its surroundings, thus allowing for motion planning and obstacle avoidance, directly integrated within the design environment. The method is demonstrated through a series of case-studies. The method combines haptic teaching with machine learning to create a task specific dataset, giving the robot the ability to adapt to obstacles without being explicitly programmed at every instruction. This opens the door to shifting to robotic applications for construction in unstructured environments, where adapting to the singularities of the workspace, its occupants and activities presents an important computational hurdle today.
keywords	Architectural Robotics; Neural Networks; Path Planning; Digital Fabrication; Artificial Intelligence; Data
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	acadia19_500
id	acadia19_500
authors	Larsen, Niels Martin; Anders Kruse Aagaard
year	2019
title	Exploring Natural Wood
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 500-509
doi	https://doi.org/10.52842/conf.acadia.2019.500
summary	By investigating methods for using computation and digital manufacturing technologies to integrate material properties with architectural design tools, the research in this paper aims at revealing new potentials for the use of wood in architecture. Through an explorative approach, material particularities and fabrication methods are explored and combined into new workflows and architectural expressions. The research looks into different properties and capacities of wood, but the main part of the experimentation revolves around crooked oak logs. Due to their irregularities, these logs are normally discarded. However, through the methods suggested in this research, they are instead matched with unique processing informed by their divergence. The research presents a workflow for handling the discrete shapes of sawlogs in a system that both involve the collecting of material, scanning/digitization, handling of a stockpile, computer analysis, design, and robotic manufacturing. The workflow includes multiple custom-made solutions for handling the complex and different shapes and data of wood logs in a highly digitized machining and fabrication environment. The suggested method is established through investigations of wood as a natural material, studies of the production lines in the current wood industry, and experimentation in our in-house laboratory facilities. This up-cycling of discarded wood supply establishes a non-standard workflow that utilizes non-standard material stock and leads to a critical articulation of today’s linear material economy. The research thereby gives an example of how the natural forms and properties of sawlogs can be directly used to generate new structures and spatial conditions.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ijac201917206
id	ijac201917206
authors	Ackerman, Aidan; Jonathan Cave, Chien-Yu Lin and Kyle Stillwell
year	2019
title	Computational modeling for climate change: Simulating and visualizing a resilient landscape architecture design approach
source	International Journal of Architectural Computing vol. 17 - no. 2, 125-147
summary	Coastlines are changing, wildfires are raging, cities are getting hotter, and spatial designers are charged with the task of designing to mitigate these unknowns. This research examines computational digital workflows to understand and alleviate the impacts of climate change on urban landscapes. The methodology includes two separate simulation and visualization workflows. The first workflow uses an animated particle fluid simulator in combination with geographic information systems data, Photoshop software, and three-dimensional modeling and animation software to simulate erosion and sedimentation patterns, coastal inundation, and sea level rise. The second workflow integrates building information modeling data, computational fluid dynamics simulators, and parameters from EnergyPlus and Landsat to produce typologies and strategies for mitigating urban heat island effects. The effectiveness of these workflows is demonstrated by inserting design prototypes into modeled environments to visualize their success or failure. The result of these efforts is a suite of workflows which have the potential to vastly improve the efficacy with which architects and landscape architects use existing data to address the urgency of climate change.
keywords	Modeling, simulation, environment, ecosystem, landscape, climate change, sea level rise, urban heat island
series	journal
email
last changed	2019/08/07 14:04

_id	acadia19_168
id	acadia19_168
authors	Adilenidou, Yota; Ahmed, Zeeshan Yunus; Freek, Bos; Colletti, Marjan
year	2019
title	Unprintable Forms
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp.168-177
doi	https://doi.org/10.52842/conf.acadia.2019.168
summary	This paper presents a 3D Concrete Printing (3DCP) experiment at the full scale of virtualarchitectural bodies developed through a computational technique based on the use of Cellular Automata (CA). The theoretical concept behind this technique is the decoding of errors in form generation and the invention of a process that would recreate the errors as a response to optimization (Adilenidou 2015). The generative design process established a family of structural and formal elements whose proliferation is guided through sets of differential grids (multi-grids) leading to the build-up of large span structures and edifices, for example, a cathedral. This tooling system is capable of producing, with specific inputs, a large number of outcomes in different scales. However, the resulting virtual surfaces could be considered as "unprintable" either due to their need of extra support or due to the presence of many cavities in the surface topology. The above characteristics could be categorized as errors, malfunctions, or undesired details in the geometry of a form that would need to be eliminated to prepare it for printing. This research project attempts to transform these "fabrication imprecisions" through new 3DCP techniques into factors of robustness of the resulting structure. The process includes the elimination of the detail / "errors" of the surface and their later reinsertion as structural folds that would strengthen the assembly. Through this process, the tangible outputs achieved fulfill design and functional requirements without compromising their structural integrity due to the manufacturing constraints.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2019_660
id	caadria2019_660
authors	Aghaei Meibodi, Mania, Giesecke, Rena and Dillenburger, Benjamin
year	2019
title	3D Printing Sand Molds for Casting Bespoke Metal Connections - Digital Metal: Additive Manufacturing for Cast Metal Joints in Architecture
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 133-142
doi	https://doi.org/10.52842/conf.caadria.2019.1.133
summary	Metal joints play a relevant role in space frame constructions, being responsible for large amount of the overall material and fabrication cost. Space frames which are constructed with standardized metal joints are constrained to repetitive structures and topologies. For customized space frames, the fabrication of individual metal joints still remains a challenge. Traditional fabrication methods such as sand casting are labour intensive, while direct 3D metal printing is too expensive and slow for the large volumes needed in architecture.This research investigates the use of Binder Jetting technology to 3D print sand molds for casting bespoke metal joints in architecture. Using this approach, a large number of custom metal joints can be fabricated economically in short time. By automating the generation of the joint geometry and the corresponding mold system, an efficient digital process chain from design to fabrication is established. Several design studies for cast metal joints are presented. The approach is successfully tested on the example of a full scale space frame structure incorporating almost two hundred custom aluminum joints.
keywords	3D printing; binder jetting; sand casting; metal joints; metal casting; space frame; digital fabrication; computational design; lightweight; customization
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia19_630
id	acadia19_630
authors	Ahlquist, Sean
year	2019
title	Expanding the Systematic Agencyof a Material System
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 630-641
doi	https://doi.org/10.52842/conf.acadia.2019.630
summary	Computational design and fabrication have reached an accomplished level of ubiquity and proficiency in the field of architecture, in both academia and practice. Materiality driving structure, responsiveness, and spatial organization can be seen to evolve, in kind, with the capabilities to fabricate deeper material hierarchies. Such maturity of a procedural material-driven approach spurs a need to shift from the dictations of how to explorations of why material efficiencies, bespoke aesthetics, and performativity are critical to a particular architecture, requiring an examination of linkages between approach, techniques, and process. The material system defines a branch of architectural research utilizing bespoke computational techniques to generate performative material capacities that are inextricably linked to both internal and external forces and energies. This paper examines such a self-referential view to define an expanded ecological approach that integrates new modes of design agency and shift the material system from closed-loop relationship with site to open-ended reciprocation with human behavior. The critical need for this capacity is shown in applications of novel textile hybrid material systems—as sensorially-responsive environments for children with the neurological autism spectrum disorder—in ongoing research titled Social Sensory Architectures. Through engaging fabrication across all material scales, manners of elastic responsivity are shown, through a series of feasibility studies, to exhibit a capacity for children to become design agents in exploring the beneficial interrelationship of sensorimotor agency and social behavior. The paper intends to contribute a theoretical approach by which novel structural capacities of a material system can support a larger ecology of social and behavioral agency.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia19_490
id	acadia19_490
authors	Alvarez, Martín; Wagner, Hans Jakob; Groenewolt, Abel; Krieg, Oliver David; Kyjanek, Ondrej; Sonntag, Daniel; Bechert, Simon; Aldinger, Lotte; Menges, Achim; Knippers, Jan
year	2019
title	The Buga Wood Pavilion
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 490-499
doi	https://doi.org/10.52842/conf.acadia.2019.490
summary	Platforms that integrate developments from multiple disciplines are becoming increasingly relevant as the complexity of different technologies increases day by day. In this context, this paper describes an integrative approach for the development of architectural projects. It portrays the benefits of applying such an approach by describing its implementation throughout the development and execution of a building demonstrator. Through increasing the agility and extending the scope of existing computational tools, multiple collaborators were empowered to generate innovative solutions across the different phases of the project´s cycle. For this purpose, novel solutions for planar segmented wood shells are showcased at different levels. First, it is demonstrated how the application of a sophisticated hollow-cassette building system allowed the optimization of material use, production time, and mounting logistics due to the modulation of the parameters of each construction element. Second, the paper discusses how the articulation of that complexity was crucial when negotiating between multiple professions, interacting with different contractors, and complying with corresponding norms. Finally, the innovative architectural features of the resulting building are described, and the accomplishments are benchmarked through comparison with typological predecessor.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia19_208
id	acadia19_208
authors	Baghi, Ali; Baghi, Aryan; Kalantari, Saleh
year	2019
title	FLEXI-NODE
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 207-218
doi	https://doi.org/10.52842/conf.acadia.2019.207
summary	This paper is part of an ongoing research project on flexible molds for use in concrete fabrication. It continues and advances the concept of adjustable molds by creating a flexible system to produce a variety of concrete grid-joints. This reusable and adaptive mold streamlines the process of fabricating inherently diverse nodal joints without the need for cost-intensive mass-customization methods. The paper also proposes a novel way to cope with some of the significant drawbacks of similar mold techniques that have been explored and found wanting in similar projects. The technique used for the mold in the current research is inspired by a flexible mechanism that has been implemented in other manufacturing contexts, such as expansion joints and bendable straws. The outcomes of the project are a platform called “Flexi-node” and relevant software components that allow users to computationally design and fabricate a great variety of concrete joints for grid structures, using just one mold, with minimum material waste and no distortion from hydrostatic pressure.
keywords	flexible molds, nodal joints, computational design, concrete fabrication, mass customization, grid structures
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia19_458
id	acadia19_458
authors	Bartosh, Amber; Anzalone, Phillip
year	2019
title	Experimental Applications of Virtual Reality in Design Education
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 458-467
doi	https://doi.org/10.52842/conf.acadia.2019.458
summary	By introducing rapid reproduction, algorithms, and complex formal configurations, the digital era of architecture began a revolution. Architects incorporated the computational capacity of the computer into the design process both as a tool and as a critical component of the theories and practice of architecture as a whole. As we move into what has been coined “the second digital turn,” a period in which digital integration is considered ubiquitous, how can we consider, prepare, and propel towards the next technological innovation to significantly inform design thinking, representation, and manifestation? What tools are available to investigate this speculative design future and how can they be implemented? If the integration of technology in architecture is now a given, perhaps the next digital design era is not just digital but virtual. As new technologies emerge the potential for integrating the virtual design world with our physical senses affords novel possibilities for interactive design, simulation, analysis and construction. Hybrid reality technologies including virtual reality (VR) and augmented reality (AR), embody the potential to supersede conventional representation methodologies such as drawing, rendering, physical modeling, and animation. As they become increasingly pervasive, they will transform how we communicate ideas and data as spatial concepts. Further, they will reform the construct of the built environment when applied to both materiality and fabrication. This paper will describe the incorporation of VR as a tool in various classroom and laboratory settings, recognize the educational outcomes of this incorporation, and identify the potential relationship of these technologies to future academic exploration and application to practice.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_628
id	ecaadesigradi2019_628
authors	Borunda, Luis, Ladron de Guevara, Manuel and Anaya, Jesus
year	2019
title	Design Method for Optimized Infills in Additive Manufacturing Thermoplastic Components
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 493-502
doi	https://doi.org/10.52842/conf.ecaade.2019.1.493
summary	The following article extends and tests computational methodologies of design to consider Finite Element Analysis in the creation of optimized infill structures based on regular and semi-regular patterns that comply with the geometrical constraints of deposition. The Stress-Deformation relationship manifested in Finite Element Analysis is structured in order to influence the geometrical arrangement of the complex spatial infill. The research presents and discusses a program of performance informed infill design, and validates the generalizability of a method of internalizing and automating Finite Element Method (FEM) processing in Fused Deposition Modeling (FDM) workflows, and tests manufacturability of the methods through its ability to handle the FDM process constraints of FEM influenced intricate geometries.
keywords	Additive Manufacturing; Finite Element Analysis; Fused Deposition Modeling; 3D infill
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	acadia19_80
id	acadia19_80
authors	Bouayad, Ghali
year	2019
title	Three-Dimensional Translation of Japanese Katagami Patterns
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 80-89
doi	https://doi.org/10.52842/conf.acadia.2019.080
summary	The aim of this ongoing doctoral research is to rely on the incommensurable potential held in Japanese Katagami patterns in order to translate them into three-dimensional speculative architectures and architectural components that afford architects other design approaches differentiated from systemic and typical space configurations. While many designers are diving in the generative and computational design world by developing new personal methods, we would like to recycle the existing production of Katagami patterns into three-dimensional architectural elements that will perpetuate work of Katagami artists beyond time, borders, and scope of applicability. Given that the current digital shift has given us more computation power, we are broadening Katagami with new fabrication strategies and new methods to explore, produce, and stock geometry and data. In this paper, we rely on the Processing library IGeo (developed by Satoru Sugihara) to build bottom-up agent-based algorithms to study the architectural potential of Katagami patterns as a top-down clean and simple initial topology that avoids imitation of standard templates applied during the process of configuring and planning architectural space.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_202
id	ecaadesigradi2019_202
authors	Brasil, Alexander Lopes de Aquino and Franco, Juarez Moara Santos
year	2019
title	Customizing Mass Housing in Brazil: Introduction to an Integrated System
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 605-612
doi	https://doi.org/10.52842/conf.ecaade.2019.1.605
summary	The current work presents an original parameterized wood frame system, a computational simulation of its structural performance and preliminary results of its digital fabrication and assemblage process. The project follows the concept of integration between CAD, CAE and CAM systems, aiming at the automation of the processes that make mass customization of social housing in Brazil practicable.
keywords	mass customization; social housing; parametric and algorithmic design; simulation, prediction, and evaluation; digital fabrication; building system
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	caadria2019_204
id	caadria2019_204
authors	Calixto, Victor, Gu, Ning and Celani, Gabriela
year	2019
title	A Critical Framework of Smart Cities Development
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 685-694
doi	https://doi.org/10.52842/conf.caadria.2019.2.685
summary	This paper investigates through a review of the current literature on smart cities, reflecting different concepts across different political-social contexts, seeking to contribute to the establishment of a critical framework for smart cities development. The present work provides a review of the literature of 250 selected publications from four databases (Scielo, ScienceDirect, worldwide science, and Cumincad), covering the years from 2012 to 2018. Publications were categorised by the following steps: 3RC framework proposed by Kummitha and Crutzen (2017), the main political sectors of city planning, implementation strategies, computational techniques, and organisation rules. The information was analised graphically trying to identify tendencies along the time, and also, seeking to explore future possibilities for implementations in different political-social contexts. As a case of study, Australia and Brazil were compared using the proposed framework.
keywords	smart city; smart cities; literature review
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2019_016
id	cf2019_016
authors	Cardoso Llach, Daniel and Scott Donaldson
year	2019
title	An Experimental Archaeology of CAD Using Software Reconstruction to Explore the Past and Future of ComputerAided Design
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 130
summary	This paper proposes software reconstruction as a method to shed new light into the material, gestural, and sensual dimensions of computer-aided design technologies. Specifically, it shows how by combining historical research and creative prototyping this method can bring us closer to distant ways of seeing, touching, drawing, and designing—while raising new questions about the impact of CAD technologies on present-day architectural practices. It documents the development of two software reconstructions—of Ivan Sutherland’s “Sketchpad” and of Steven A. Coons’s “Coons Patch”—and reflects on the responses they elicited in the context of two exhibitions. The paper shows how software reconstruction can offer access to overlooked aspects of computer-aided design systems, specially their material and sensual dimensions, and how we may explore its broader potential for research, preservation, pedagogy, and speculative design of design technologies.
keywords	Software Reconstruction, Media Archaeology, CAD, Sketchpad, Steven A. Coons, Ivan Sutherland, Computational Design History
series	CAAD Futures
email
last changed	2019/07/29 14:08

_id	ecaadesigradi2019_322
id	ecaadesigradi2019_322
authors	Carl, Timo and Schein, Markus
year	2019
title	Parametric Patchwork - Advancing the Development of an Organic Photovoltaic Carrier System through Various Computational Methods
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 25-34
doi	https://doi.org/10.52842/conf.ecaade.2019.3.025
summary	This paper presents a strategy for implementing computational methods in education to solve specific project related research challenges. In our case, we investigate novel solutions for Organic Photovoltaic Carrier Systems. Therefore, environmental forces (especially the sun and shade) are important design drivers in all projects. Whilst the individual projects are limited to one semester, it is our aim to advance and accumulate these patches within a longer-term research strategy. Especially design-build projects that include digital fabrication often require a skillset not always available in a design studio environment. Providing simple parametric patches frees up time for creative investigations and allows tackling projects that are more complex. In the following, we will present and discuss a series of patches developed over the course of five projects that became our case studies. We conclude, by identifying relevant aspects that might be generalized and evaluate our insights for others.
keywords	Computational Design, Parametric Design Strategies, Environmental Design Parameters, CAAD education
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	caadria2019_190
id	caadria2019_190
authors	Chan, Zion and Crolla, Kristof
year	2019
title	Simplifying Doubly Curved Concrete - Post-Digital Expansion of Concrete's Construction Solution Space
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 23-32
doi	https://doi.org/10.52842/conf.caadria.2019.1.023
summary	This action research project develops a novel conceptual method for non-standardised concrete construction component fabrication and tests its validity through a speculative design project. The paper questions the practical, procedural and economic drivers behind the design and construction of geometrically complex concrete architecture. It proposes an alternative, simple and economical fabrication method for doubly curved concrete centred on the robotic manufacturing of casting moulds through 5-axis hotwire foam cutting for the making of doubly-curved fiber-reinforced concrete (FRC) panels. These panels are used as light-weight sacrificial formwork for in-situ concrete casting. The methodology's opportunity space is tested, evaluated and discussed through a conceptual architectural design project proposal that operates as demonstrator. The paper concludes by addressing the advantages of a design-and-build architecture delivery setup, the potential from using computational technology to adapt conventional design and construction procedures and the expanded role within the design and construction process this gives to architects.
keywords	Doubly Curved Concrete; Robotic Manufacture; Post-Digital Architecture; Design and Build; Casting Mould Making
series	CAADRIA
email
last changed	2022/06/07 07:56

For more results click below: