Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2019_660
id	caadria2019_660
authors	Aghaei Meibodi, Mania, Giesecke, Rena and Dillenburger, Benjamin
year	2019
title	3D Printing Sand Molds for Casting Bespoke Metal Connections - Digital Metal: Additive Manufacturing for Cast Metal Joints in Architecture
doi	https://doi.org/10.52842/conf.caadria.2019.1.133
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 133-142
summary	Metal joints play a relevant role in space frame constructions, being responsible for large amount of the overall material and fabrication cost. Space frames which are constructed with standardized metal joints are constrained to repetitive structures and topologies. For customized space frames, the fabrication of individual metal joints still remains a challenge. Traditional fabrication methods such as sand casting are labour intensive, while direct 3D metal printing is too expensive and slow for the large volumes needed in architecture.This research investigates the use of Binder Jetting technology to 3D print sand molds for casting bespoke metal joints in architecture. Using this approach, a large number of custom metal joints can be fabricated economically in short time. By automating the generation of the joint geometry and the corresponding mold system, an efficient digital process chain from design to fabrication is established. Several design studies for cast metal joints are presented. The approach is successfully tested on the example of a full scale space frame structure incorporating almost two hundred custom aluminum joints.
keywords	3D printing; binder jetting; sand casting; metal joints; metal casting; space frame; digital fabrication; computational design; lightweight; customization
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia19_630
id	acadia19_630
authors	Ahlquist, Sean
year	2019
title	Expanding the Systematic Agencyof a Material System
doi	https://doi.org/10.52842/conf.acadia.2019.630
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 630-641
summary	Computational design and fabrication have reached an accomplished level of ubiquity and proficiency in the field of architecture, in both academia and practice. Materiality driving structure, responsiveness, and spatial organization can be seen to evolve, in kind, with the capabilities to fabricate deeper material hierarchies. Such maturity of a procedural material-driven approach spurs a need to shift from the dictations of how to explorations of why material efficiencies, bespoke aesthetics, and performativity are critical to a particular architecture, requiring an examination of linkages between approach, techniques, and process. The material system defines a branch of architectural research utilizing bespoke computational techniques to generate performative material capacities that are inextricably linked to both internal and external forces and energies. This paper examines such a self-referential view to define an expanded ecological approach that integrates new modes of design agency and shift the material system from closed-loop relationship with site to open-ended reciprocation with human behavior. The critical need for this capacity is shown in applications of novel textile hybrid material systems—as sensorially-responsive environments for children with the neurological autism spectrum disorder—in ongoing research titled Social Sensory Architectures. Through engaging fabrication across all material scales, manners of elastic responsivity are shown, through a series of feasibility studies, to exhibit a capacity for children to become design agents in exploring the beneficial interrelationship of sensorimotor agency and social behavior. The paper intends to contribute a theoretical approach by which novel structural capacities of a material system can support a larger ecology of social and behavioral agency.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_061
id	ecaadesigradi2019_061
authors	Alkadri, Miktha Farid, De Luca, Francesco, Turrin, Michela and Sariyildiz, Sevil
year	2019
title	Making use of Point Cloud for Generating Subtractive Solar Envelopes
doi	https://doi.org/10.52842/conf.ecaade.2019.1.633
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 633-640
summary	As a contextual and passive design strategy, solar envelopes play a great role in determining building mass based on desirable sun access during the predefined period. With the rapid evolution of digital tools, the design method of solar envelopes varies in different computational platforms. However, current approaches still lack in covering the detailed complex geometry and relevant information of the surrounding context. This, consequently, affects missing information during contextual analysis and simulation of solar envelopes. This study proposes a subtractive method of solar envelopes by considering the geometrical attribute contained in the point cloud of TLS (terrestrial laser scanner) dataset. Integration of point cloud into the workflow of solar envelopes not only increases the robustness of final geometry of existing solar envelopes but also enhances awareness of architects during contextual analysis due to consideration of surface properties of the existing environment.
keywords	point cloud data; solar envelopes; subtractive method; solar access
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	acadia19_596
id	acadia19_596
authors	Anton, Ana; Yoo, Angela; Bedarf, Patrick; Reiter, Lex; Wangler, Timothy; Dillenburger, Benjamin
year	2019
title	Vertical Modulations
doi	https://doi.org/10.52842/conf.acadia.2019.596
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 596-605
summary	The context of digital fabrication allows architects to reinvestigate material, process and the design decisions they entail to explore novel expression in architecture. This demands a new approach to design thinking, as well as the relevant tools to couple the form of artefacts with the process in which they are made. This paper presents a customised computational design tool developed for exploring the novel design space of Concrete Extrusion 3D Printing (CE3DP), enabling a reinterpretation of the concrete column building typology. This tool allows the designer to access generative engines such as trigonometric functions and mesh subdivision through an intuitive graphical user interface. Balancing process efficiency as understood by our industry with a strong design focus, we aim to articulate the unique architectural qualities inherent to CE3DP, energising much needed innovation in concrete technology.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	cf2019_069
id	cf2019_069
authors	Caetano, Inês ;and António Leitão
year	2019
title	Weaving Architectural Façades: Exploring algorithmic stripe-based design patterns
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 565-584
summary	With the recent technological developments, particularly, the integration of computational design approaches in architecture, the traditional art techniques became increasingly important in the field. This includes weaving techniques, which have a promising application in architectural screens and façade designs. Nevertheless, the adoption of weaving as a design strategy still has many unexplored areas, particularly those related to Algorithmic Design (AD). This paper addresses the creation of weave-based façade patterns by presenting a Generative System (GS) that aids architects that intend to use AD in the design of façades inspired on traditional weaving techniques. This GS proves to reduce the time and effort spent with the programming task, while supporting the exploration of a wider solution space. Moreover, in addition to enabling the integration of user-generated weaving patterns, the GS also provides rationalization algorithms to assess the construction feasibility of the obtained solutions.
keywords	Algorithmic Design, Façade Design, Weaving Patterns, Algorithmic Framework, Rationalization Processes
series	CAAD Futures
type	normal paper
email
last changed	2019/07/29 14:19

_id	caadria2019_190
id	caadria2019_190
authors	Chan, Zion and Crolla, Kristof
year	2019
title	Simplifying Doubly Curved Concrete - Post-Digital Expansion of Concrete's Construction Solution Space
doi	https://doi.org/10.52842/conf.caadria.2019.1.023
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 23-32
summary	This action research project develops a novel conceptual method for non-standardised concrete construction component fabrication and tests its validity through a speculative design project. The paper questions the practical, procedural and economic drivers behind the design and construction of geometrically complex concrete architecture. It proposes an alternative, simple and economical fabrication method for doubly curved concrete centred on the robotic manufacturing of casting moulds through 5-axis hotwire foam cutting for the making of doubly-curved fiber-reinforced concrete (FRC) panels. These panels are used as light-weight sacrificial formwork for in-situ concrete casting. The methodology's opportunity space is tested, evaluated and discussed through a conceptual architectural design project proposal that operates as demonstrator. The paper concludes by addressing the advantages of a design-and-build architecture delivery setup, the potential from using computational technology to adapt conventional design and construction procedures and the expanded role within the design and construction process this gives to architects.
keywords	Doubly Curved Concrete; Robotic Manufacture; Post-Digital Architecture; Design and Build; Casting Mould Making
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2019_021
id	cf2019_021
authors	Cheng, Chi-Li and June-Hao Hou
year	2019
title	A Method of Mesh Simplification for Drone 3D Modeling with Architectural Feature Extraction
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 169
summary	This paper proposes a method of mesh simplification for 3D terrain or city models generated photogrammetrically from drone captured images, enabled by the ability of extracting the architectural features. Compare to traditional geometric computational method, the proposed method recognizes and processes the features from the architectural perspectives. In addition, the workflow also allows exporting the simplified models and geometric features to open platforms, e.g. OpenStreetMap, for practical usages in site analysis, city generation, and contributing to the open data communities.
keywords	Mesh Reconstruction, photogrammetry, mesh simplification, procedural mode, machine learning
series	CAAD Futures
email
last changed	2019/07/29 14:08

_id	ecaadesigradi2019_405
id	ecaadesigradi2019_405
authors	da Cunha Teixeira, Luísa and Cury Paraizo, Rodrigo
year	2019
title	Caronae - ridesharing and first steps into commuting opportunitie of academic exchange
doi	https://doi.org/10.52842/conf.ecaade.2019.1.805
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 805-816
summary	Location-based mobile applications have been a rising theme for academics in the field of urbanism and in urban and transportation, because of the potential of transformation they might bring to the urban landscape (De Souza e Silva, 2013). One of the possibilities we study here is to observe social encounters fostered by commuting rides. In this paper, we try to examine the practice from the broad perspective of estimating the environmental benefits, in a context where digital information technology is wielded to address problems old and new (Townsend, 2014). This paper aims to analyze the potential of transformations that new ICTs bring to urban mobility, using as case study the official ridesharing system of the Federal University of Rio de Janeiro, the Carona? project. The system was developed focusing on the reduction of the number of motorized trips to the University, as well as the amount of CO2 generated by them. Here we analyze the dynamics of ridesharing, using the system data, and also try to observe the role it may play towards the promotion of integration in the UFRJ community.
keywords	mobile apps; urban mobility; ridesharing; caronae ufrj
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	acadia19_360
id	acadia19_360
authors	Dackiw, Jean-Nicolas Alois; Foltman, Andrzej; Garivani, Soroush; Kaseman, Keith; Sollazzo, Aldo
year	2019
title	Cyber-physical UAV Navigation and Operation
doi	https://doi.org/10.52842/conf.acadia.2019.360
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 360-367
summary	The purpose of this paper is to present a work in progress pertaining to drone pose estimation and flight calibration. This paper intends to underline the increasing importance of determining alternative path planning instruments through accurate localization for Unmanned Aerial Vehicles (UAVs) with the purpose of achieving complex flight operations for the emerging applications of autonomous robotics in surveying, design, fabrication, and on-site operations. This research is based on the implementation of novel technologies such as Augmented Reality (AR), Robot Operating System (ROS), and computational approaches to define a drone calibration methodology, leveraging existing methods for drone path planning. Drones are equipped with measurement systems to provide geo-location and time information such as onboard Global Positioning System (GPS) sensors, and Inertial Measurement Units (IMU). As stated in previous research, to increase navigation capabilities, measurements and data processing algorithms have a critical role (Daponte et al. 2015). The outcome of this work in progress showcases valuable results in calculating and assessing accurate positioning for UAVs, and developing data exchanges in transmission, reception, and tracking.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_514
id	ecaadesigradi2019_514
authors	de Miguel, Jaime, Villafa?e, Maria Eugenia, Piškorec, Luka and Sancho-Caparrini, Fernando
year	2019
title	Deep Form Finding - Using Variational Autoencoders for deep form finding of structural typologies
doi	https://doi.org/10.52842/conf.ecaade.2019.1.071
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 71-80
summary	In this paper, we are aiming to present a methodology for generation, manipulation and form finding of structural typologies using variational autoencoders, a machine learning model based on neural networks. We are giving a detailed description of the neural network architecture used as well as the data representation based on the concept of a 3D-canvas with voxelized wireframes. In this 3D-canvas, the input geometry of the building typologies is represented through their connectivity map and subsequently augmented to increase the size of the training set. Our variational autoencoder model then learns a continuous latent distribution of the input data from which we can sample to generate new geometry instances, essentially hybrids of the initial input geometries. Finally, we present the results of these computational experiments and lay out the conclusions as well as outlook for future research in this field.
keywords	artificial intelligence; deep neural networks; variational autoencoders; generative design; form finding; structural design
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	acadia19_412
id	acadia19_412
authors	Del Campo, Matias; Manninger, Sandra; Carlson, Alexandra
year	2019
title	Imaginary Plans
doi	https://doi.org/10.52842/conf.acadia.2019.412
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 412-418
summary	Artificial Neural Networks (NN) have become ubiquitous across disciplines due to their high performance in modeling the real world to execute complex tasks in the wild. This paper presents a computational design approach that uses the internal representations of deep vision neural networks to generate and transfer stylistic form edits to both 2D floor plans and building sections. The main aim of this paper is to demonstrate and interrogate a design technique based on deep learning. The discussion includes aspects of machine learning, 2D to 2D style transfers, and generative adversarial processes. The paper examines the meaning of agency in a world where decision making processes are defined by human/machine collaborations (Figure 1), and their relationship to aspects of a Posthuman design ecology. Taking cues from the language used by experts in AI, such as Hallucinations, Dreaming, Style Transfer, and Vision, the paper strives to clarify the position and role of Artificial Intelligence in the discipline of Architecture.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	acadia20_192p
id	acadia20_192p
authors	Doyle, Shelby; Hunt, Erin
year	2020
title	Melting 2.0
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 192-197
summary	This project presents computational design and fabrication methods for locating standard steel reinforcement within 3D printed water-soluble PVA (polyvinyl alcohol) molds to create non-standard concrete columns. Previous methods from “Melting: Augmenting Concrete Columns with Water Soluble 3D Printed Formwork” and “Dissolvable 3D Printed Formwork: Exploring Additive Manufacturing for Reinforced Concrete” (Doyle & Hunt 2019) were adapted for larger-scale construction, including the introduction of new hardware, development of custom programming strategies, and updated digital fabrication techniques. Initial research plans included 3D printing continuous PVA formwork with a KUKA Agilus Kr10 R1100 industrial robotic arm. However, COVID-19 university campus closures led to fabrication shifting to the author’s home, and this phase instead relied upon a LulzBot TAZ 6 (build volume of 280 mm x 280 mm x 250 mm) with an HS+ (Hardened Steel) tool head (1.2 mm nozzle diameter). Two methods were developed for this project phase: new 3D printing hardware and custom GCode production. The methods were then evaluated in the fabrication of three non-standard columns designed around five standard reinforcement bars (3/8-inch diameter): Woven, Twisted, Aperture. Each test column was eight inches in diameter (the same size as a standard Sonotube concrete form) and 4 feet tall, approximately half the height of an architecturally scaled 8-foot-tall column. Each column’s form was generated from combining these diameter and height restrictions with the constraints of standard reinforcement placement and minimum concrete coverage. The formwork was then printed, assembled, cast, and then submerged in water to dissolve the molds to reveal the cast concrete. This mold dissolving process limits the applicable scale for the work as it transitions from the research lab to the construction site. Therefore, the final column was placed outside with its mold intact to explore if humidity and water alone can dissolve the PVA formwork in lieu of submersion.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	cf2019_060
id	cf2019_060
authors	Duarte, Jose and Mahyar Hadighi
year	2019
title	Bauhaus Internationalism to College Town Modernism: Exploring Bauhaus Culture in Hajjar’s Hybrid Architecture
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 501
summary	The purpose of this study is to analyze William Hajjar’s singlefamily houses in State College, PA, and compare them with the European modernist work of Walter Gropius and Marcel Breuer in the United States. This analysis is performed using shape grammars as a computational design methodology. Hajjar was a member of the architecture faculty at the Pennsylvania State University, a practitioner in State College, and an influential figure in the history of architecture in the area. Shape grammars are used specifically to verify and describe the influences of Bauhaus/European modernism on Hajjar’s domestic architecture. The focus is on establishing Hajjar’s single-family architectural language and comparing it to the architectural language of Gropius (Gropius-Breuer partnership) as the founder of the Bauhaus architecture and a prominent practitioner in introducing European modernism to American architecture students in the mid-twentieth century like Hajjar.
keywords	Shape grammar, Modern architecture, Bauhaus modernism, William Hajjar, Walter Gropius
series	CAAD Futures
email
last changed	2019/07/29 14:18

_id	ecaadesigradi2019_665
id	ecaadesigradi2019_665
authors	Duque Estrada, Rebeca, Wyller, Maria and Dahy, Hanaa
year	2019
title	Aerochair - Integrative design methodologies for lightweight carbon fiber furniture design
doi	https://doi.org/10.52842/conf.ecaade.2019.1.691
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 691-700
summary	Carbon fiber composites embody lightweight and strength and is a well-integrated material in various fields of engineering. In spite of its excellent material properties, it is not frequently found in architecture and design applications. In this project, the intention is to research how the material's most prominent qualities can be applied to create a lightweight furniture design. The furniture object was chosen as an example of a small architectural component with a structural capacity of holding a human body weight between 60-90 Kg. In particular, carbon fiber composites display an impressive tensile strength, and with the aim of exploring this feature, a case-study of a full-scale, hanging carbon chair was conducted. To develop a design, optimize it and realize it, an integrated design and fabrication process was developed. It combined material research, computational design, and a novel fabrication method for filament materials.
keywords	carbon fiber composites; computational design; lightweight furniture; chair design; fiber winding
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	ecaadesigradi2019_316
id	ecaadesigradi2019_316
authors	Erbil Altintas, Livanur, Kasali, Altug and Dogan, Fehmi
year	2019
title	Computational Design in Distributed Teamwork - Using digital and non-digital tools in architectural design competitions
doi	https://doi.org/10.52842/conf.ecaade.2019.1.333
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 333-340
summary	This paper reports a case involving computational practices in design process with an aim to understand the role of digital and non-digital tools in the design process. Following an ethnographic approach, we aimed at understanding the nature of the interactions among team participants which are human and non-human in a distributed system. We focused on computational practices in design process and we aimed to understand the role of digital and non-digital tools in the design process. Tools have remarkable role in a distributed system in the sense of propagation of knowledge. It was observed that form exploration by digital tools may not controlled as much as sketching.
keywords	Collaboration; Distributed Cognition; Computational Design; Visual Calculation
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	ecaadesigradi2019_116
id	ecaadesigradi2019_116
authors	Fernando, Shayani
year	2019
title	Collaborative Crafting of Interlocking Structures in Stereotomic Practice
doi	https://doi.org/10.52842/conf.ecaade.2019.2.183
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 183-190
summary	Situated within the art of cutting solids (stereotomy) and the evolution of machine tools; this research will investigate subtractive fabrication in relation to robotic carving of stone structures. The advancement of the industrial revolutions in the mid to late 19th century saw the rise of new building techniques and materials which were primarily based on structural steel construction. The modern aesthetic of the time further diminished the place of traditional stonework and ornamentation in modern structures within the building arts. This paper will focus on the design and fabrication of three sculptural dry-stone modular prototypes investigating interlocking self-supporting structures in stone. Examining the value of robotic technologies in the design and construction process in relation to collaborative crafting of the hand and machine. Accommodating for material tolerances which are a major factor in this research. Interrogating the value of robotic crafting with material implications and exploring the role of the artisan in machine crafted architectural components.
keywords	Collaborative; Crafting; Interlocking; Structures; Robotic Fabrication; Digital Stone
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:50

_id	cf2019_039
id	cf2019_039
authors	Guo, Fei ; Eduardo Castro e Costa, Jose Duarte and Shadi Nazarian
year	2019
title	Computational Implementation of a Tool for Generative Design of High-rise Residential Building Facades
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 301-316
summary	We propose a computational design tool that aims to provide more variety to the design of high-rise residential building facades. In contemporary cities, the pressure to build many high-rise residential buildings leaves little time to focus on facade design, resulting in repetitive facades that impart a monotonous appearance to cities. We propose a computational tool that can help to improve facade variety, based on shape grammars and parametric modeling. Shape grammars are used to analyze facade composition and to structure design knowledge. Subsequently, the grammars are converted into parametric models, which are implemented using the Python programming language that can be used to generate designs in CAD software. The resulting tool encodes a general parametric model that manipulates the rules of formal composition of building facades. Without limitations from software, the program takes advantage of the high-processing power of the computer to provide many design solutions from which architects can choose.
keywords	Variety, Facades, Computational Design, Parametric Modeling, Shape Grammar
series	CAAD Futures
email
last changed	2019/07/29 14:15

_id	ecaadesigradi2019_273
id	ecaadesigradi2019_273
authors	Hadighi, Mahyar and Duarte, Jose
year	2019
title	Using Grammars to Trace Architectural Hybridity in American Modernism - The case of William Hajjar single-family house
doi	https://doi.org/10.52842/conf.ecaade.2019.1.529
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 529-540
summary	In this paper, mid-century modern single-family houses designed by William Hajjar are analyzed through a shape grammar methodology within the context of the traditional architecture of an American college town. A member of the architecture faculty at the Pennsylvania State University, Hajjar was a practitioner in State College, PA, where the University Park campus is located, and an influential figure in the history of architecture in the area. The residential architecture he designed for and built in the area incorporates many of the formal and functional features typical of both modern European architecture and traditional American architecture. Based on a computational methodology, this study offers an investigation into this hybridity phenomenon by exploring Hajjar's architecture in relation to the traditional American architecture prevalent in the college town of State College.
keywords	shape grammar; American architecture; William Hajjar; hybridity; college town
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:49

_id	caadria2019_626
id	caadria2019_626
authors	Hahm, Soomeen, Maciel, Abel, Sumitiomo, Eri and Lopez Rodriguez, Alvaro
year	2019
title	FlowMorph - Exploring the human-material interaction in digitally augmented craftsmanship
doi	https://doi.org/10.52842/conf.caadria.2019.1.553
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 553-562
summary	It has been proposed that, after the internet age, we are now entering a new era of the '/Augmented Age/' (King, 2016). Physician Michio Kaku imagined the future of architects will be relying heavily on Augmented Reality technology (Kaku, 2015). Augmented reality technology is not a new technology and has been evolving rapidly. In the last three years, the technology has been applied in mainstream consumer devices (Coppens, 2017). This opened up possibilities in every aspect of our daily lives and it is expected that this will have a great impact on every field of consumer's technology in near future, including design and fabrication. What is the future of design and making? What kind of new digital fabrication paradigm will emerge from inevitable technological development? What kind of impact will this have on the built environment and industry? FlowMorph is a research project developed in the Bartlett School of Architecture, B-Pro AD with the collaboration of the authors and students as a 12 month MArch programme, we developed a unique design project trying to answer these questions which will be introduced in this paper.
keywords	Augmented Reality, Mixed Reality, Virtual Reality, Design Augmentation, Digital Fabrication, Cognition models, Conceptual Designing, Design Process, Design by Making, Generative Design, Computational Design, Human-Machine Collaboration, Human-Computer Collaboration, Human intuition in digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:51

For more results click below: