Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 512

Reformat results as: short short into frame detailed detailed into frame

_id	ecaadesigradi2019_404
id	ecaadesigradi2019_404
authors	Collins, Jeffrey and Gentry, Russell
year	2019
title	Coordinating Atypical Architectural Precast Concrete Façades - Two categories
doi	https://doi.org/10.52842/conf.ecaade.2019.2.261
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 261-268
summary	This research focuses on issues of coordination between designers and fabricators during early design. The aim of this work is to improve representations, enable more informed conversations, and streamline exchanges of digital models. In order to show the potential of the work, research is focused on architectural precast concrete facades. Previous work established methods for linking "global" and "local" parametric models of architectural intent and corresponding components, describing processes of mapping from individual custom panels to diagrammatic façade surfaces and vice-versa. Such mapping may be considered "direct," wherein individual panel boundaries - defined by surface patterning - allow simple mapping of data from global to local or from local to global descriptions. However, there are some buildings with architectural precast concrete façades which do not permit direct relationships between global and local descriptions. These atypical facades require "indirect" maps containing additional layers of information in order to coordinate global and local descriptions. This paper describes two categories of these indirect scenarios: "panelization" and "patterns across panels."
keywords	BIM; Parametric modelling; Architectural precast concrete; Building facades
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	acadia19_258
id	acadia19_258
authors	Bar-Sinai, Karen Lee; Shaked, Tom; Sprecher, Aaron
year	2019
title	Informing Grounds
doi	https://doi.org/10.52842/conf.acadia.2019.258
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 258-265
summary	Advancements in robotic fabrication are enabling on-site construction in increasingly larger scales. In this paper, we argue that as autonomous tools encounter the territorial scale, they open new ways to embed information into it. To define the new practice, this paper introduces a protocol combining a theoretical framework and an iterative process titled Informing Grounds. This protocol mediates and supports the exchange of knowledge between a digital and a physical environment and is applicable to a variety of materials with uncertain characteristics in a robotic manufacturing scenario. The process is applied on soil and demonstrated through a recent design-to-fabrication workshop that focused on simulating digital groundscaping of distant lunar grounds employing robotic sand-forming. The first stage is ‘sampling’—observing the physical domain both as an initial step as well as a step between the forming cycles to update the virtual model. The second stage is ‘streaming’—the generation of information derived from the digital model and its projection onto the physical realm. The third stage is ‘transforming’—the shaping of the sand medium through a physical gesture. The workshop outcomes serve as the basis for discussion regarding the challenges posed by applying autonomous robotic tools on materials with uncertain behavior at a large-scale.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_399
id	ecaadesigradi2019_399
authors	Kieferle, Joachim and Woessner, Uwe
year	2019
title	Virtual Reality in Early Phases of Architectural Studies - Experiments with first year students in immersive rear projection based virtual environments
doi	https://doi.org/10.52842/conf.ecaade.2019.3.099
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 99-106
summary	Virtual Reality is quite commonly used in architectural education, however mostly in higher semesters and within elective courses. This paper reports about various teaching scenarios using Virtual Reality in projection based immersive environments at very early phases of architectural studies, within the first two semesters. Various student questionnaires were carried out and clearly show benefits for students to gain spatial awareness in their design projects, and for discussing their design intentions. Experiences with cyber sickness and issues like accessibility to the immersive environments are discussed as well within the given context.
keywords	Virtual Reality; Education; Curriculum
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	ecaadesigradi2019_675
id	ecaadesigradi2019_675
authors	Taha, Nizar, Walzer, Alexander Nikolas, Ruangjun, Jetana, Bürgin, Theophil, Dörfler, Kathrin, Lloret-Fritschi, Ena, Gramazio, Fabio and Kohler, Matthias
year	2019
title	Robotic AeroCrete - A novel robotic spraying and surface treatment technology for the production of slender reinforced concrete elements
doi	https://doi.org/10.52842/conf.ecaade.2019.3.245
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 245-254
summary	This research paper presents a novel method for robotic spraying of glass-fibre reinforced concrete (GFRC) on a permeable reinforcement mesh. In this process, the mesh acts as a functional formwork during the concrete spraying process and as reinforcement once the concrete is cured, with the goal of producing slender reinforced concrete elements efficiently. The proof of concept presented in this paper takes inspiration from "Ferrocement" technique, developed in the 1940s by Pier Luigi Nervi (Greco, 1994) and shows how robotic spraying has the potential of producing such slender and bespoke reinforced concrete elements while also having the potential of reducing manual labour, waste and excess material. The system is coined with the name "Robotic AeroCrete" (or RAC) in reference to the use of an industrial robotic setup and the pneumatic projection of concrete.
keywords	Shotcrete; Digital Fabrication; Robotic Fabrication; Ferrocement
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_495
id	ecaadesigradi2019_495
authors	Herrera, Pablo C and Braida, Frederico
year	2019
title	Digital Technologies in Latin American Architecture - A Literature Review from the Third to the Fourth Industrial Revolution
doi	https://doi.org/10.52842/conf.ecaade.2019.1.431
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 431-440
summary	This paper approaches the literature that combines the fields of Architectural Computing and Architecture and Urbanism produced in Latin America during the first two decades of the 21st Century. The main objective is to map the advancement of Digital Technology in Architecture and Urbanism in the context of the Third Industrial Revolution, in order to identify perspectives towards a Fourth Industrial Revolution. As methodology was applied a chronological survey of the literature produced in book format, predominantly printed in the 21st Century by Latin Americans researches in leading digital themes. At last, it can be verified that the production is still very scarce and still has not incorporated, in a significant way, the themes related to the Fourth Industrial Revolution.
keywords	Latin America; Digital Technologies; Industrial Revolution; Literature Review; Architectural Computing
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:50

_id	lasg_whitepapers_2019_123
id	lasg_whitepapers_2019_123
authors	Hosale, Mark-David
year	2019
title	Worldmaking as Techné; Participatory Art, Music, and Architecture
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.123 - 132
summary	This article is an adaptation of a talk given by Mark-David Hosale at the [Worldmaking as Techné: Participatory Art, Music, and Architecture] book launch that took place at the Toronto Media Arts Centre on September 26th 2018.
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	acadia19_000
id	acadia19_000
year	2019
title	ACADIA 19:UBIQUITY AND AUTONOMY
doi	https://doi.org/10.52842/conf.acadia.2019
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) 702 p.
series	ACADIA
last changed	2022/06/07 07:49

_id	cf2019_052
id	cf2019_052
authors	Abdelmohsen, Sherif ;Passaint Massoud, Rana El-Dabaa, Aly Ibrahim and Tasbeh Mokbel
year	2019
title	The Effect of Hygroscopic Design Parameters on the Programmability of Laminated Wood Composites for Adaptive Façades
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 435
summary	Typical adaptive façades respond to external conditions to enhance indoor spaces based on complex mechanical actuators and programmable functions. Hygroscopic embedded properties of wood, as low-cost low-tech programmable material, have been utilized to induce passive motion mechanisms. Wood as anisotropic material allows for different passive programmable motion configurations that relies on several hygroscopic design parameters. This paper explores the effect of these parameters on programmability of laminated wood composites through physical experiments in controlled humidity environment. The paper studies variety of laminated configurations involving different grain orientations, and their effect on maximum angle of deflection and its durability. Angle of deflection is measured using image analysis software that is used for continuous tracking of deflection in relation to time. Durability is studied as the number of complete programmable cycles that wood could withstand before reaching point of failure. Results revealed that samples with highest deflection angle have least programmability durability.
keywords	Wood, hygroscopic design, lamination, deflection, durability, adaptive façades
series	CAAD Futures
email
last changed	2019/07/29 14:18

_id	ijac201917206
id	ijac201917206
authors	Ackerman, Aidan; Jonathan Cave, Chien-Yu Lin and Kyle Stillwell
year	2019
title	Computational modeling for climate change: Simulating and visualizing a resilient landscape architecture design approach
source	International Journal of Architectural Computing vol. 17 - no. 2, 125-147
summary	Coastlines are changing, wildfires are raging, cities are getting hotter, and spatial designers are charged with the task of designing to mitigate these unknowns. This research examines computational digital workflows to understand and alleviate the impacts of climate change on urban landscapes. The methodology includes two separate simulation and visualization workflows. The first workflow uses an animated particle fluid simulator in combination with geographic information systems data, Photoshop software, and three-dimensional modeling and animation software to simulate erosion and sedimentation patterns, coastal inundation, and sea level rise. The second workflow integrates building information modeling data, computational fluid dynamics simulators, and parameters from EnergyPlus and Landsat to produce typologies and strategies for mitigating urban heat island effects. The effectiveness of these workflows is demonstrated by inserting design prototypes into modeled environments to visualize their success or failure. The result of these efforts is a suite of workflows which have the potential to vastly improve the efficacy with which architects and landscape architects use existing data to address the urgency of climate change.
keywords	Modeling, simulation, environment, ecosystem, landscape, climate change, sea level rise, urban heat island
series	journal
email
last changed	2019/08/07 14:04

_id	acadia19_168
id	acadia19_168
authors	Adilenidou, Yota; Ahmed, Zeeshan Yunus; Freek, Bos; Colletti, Marjan
year	2019
title	Unprintable Forms
doi	https://doi.org/10.52842/conf.acadia.2019.168
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp.168-177
summary	This paper presents a 3D Concrete Printing (3DCP) experiment at the full scale of virtualarchitectural bodies developed through a computational technique based on the use of Cellular Automata (CA). The theoretical concept behind this technique is the decoding of errors in form generation and the invention of a process that would recreate the errors as a response to optimization (Adilenidou 2015). The generative design process established a family of structural and formal elements whose proliferation is guided through sets of differential grids (multi-grids) leading to the build-up of large span structures and edifices, for example, a cathedral. This tooling system is capable of producing, with specific inputs, a large number of outcomes in different scales. However, the resulting virtual surfaces could be considered as "unprintable" either due to their need of extra support or due to the presence of many cavities in the surface topology. The above characteristics could be categorized as errors, malfunctions, or undesired details in the geometry of a form that would need to be eliminated to prepare it for printing. This research project attempts to transform these "fabrication imprecisions" through new 3DCP techniques into factors of robustness of the resulting structure. The process includes the elimination of the detail / "errors" of the surface and their later reinsertion as structural folds that would strengthen the assembly. Through this process, the tangible outputs achieved fulfill design and functional requirements without compromising their structural integrity due to the manufacturing constraints.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2019_660
id	caadria2019_660
authors	Aghaei Meibodi, Mania, Giesecke, Rena and Dillenburger, Benjamin
year	2019
title	3D Printing Sand Molds for Casting Bespoke Metal Connections - Digital Metal: Additive Manufacturing for Cast Metal Joints in Architecture
doi	https://doi.org/10.52842/conf.caadria.2019.1.133
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 133-142
summary	Metal joints play a relevant role in space frame constructions, being responsible for large amount of the overall material and fabrication cost. Space frames which are constructed with standardized metal joints are constrained to repetitive structures and topologies. For customized space frames, the fabrication of individual metal joints still remains a challenge. Traditional fabrication methods such as sand casting are labour intensive, while direct 3D metal printing is too expensive and slow for the large volumes needed in architecture.This research investigates the use of Binder Jetting technology to 3D print sand molds for casting bespoke metal joints in architecture. Using this approach, a large number of custom metal joints can be fabricated economically in short time. By automating the generation of the joint geometry and the corresponding mold system, an efficient digital process chain from design to fabrication is established. Several design studies for cast metal joints are presented. The approach is successfully tested on the example of a full scale space frame structure incorporating almost two hundred custom aluminum joints.
keywords	3D printing; binder jetting; sand casting; metal joints; metal casting; space frame; digital fabrication; computational design; lightweight; customization
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2019_055
id	cf2019_055
authors	Agirbas, Asli
year	2019
title	A proposal for the use of fractal geometry algorithmically in tiling design
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 438-453
summary	The design inspired by nature is an ongoing issue from the past to the present. There are many design examples inspired from nature. Fractal geometry formation, which is focused on this study, is a system seen in nature. A model based on fractal growth principle was proposed for tile design. In this proposal made with using Visual Programming Language, a tiling design experiment placed in a hexagonal grid system was carried out. Thus, a base was created for tile designs to be made using the fractal principle. The results of the case study were evaluated and potential future studies were discussed.
keywords	Fractals, Tile design, Biomimetic design, Algorithmic design
series	CAAD Futures
email
last changed	2019/07/29 14:18

_id	acadia19_630
id	acadia19_630
authors	Ahlquist, Sean
year	2019
title	Expanding the Systematic Agencyof a Material System
doi	https://doi.org/10.52842/conf.acadia.2019.630
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 630-641
summary	Computational design and fabrication have reached an accomplished level of ubiquity and proficiency in the field of architecture, in both academia and practice. Materiality driving structure, responsiveness, and spatial organization can be seen to evolve, in kind, with the capabilities to fabricate deeper material hierarchies. Such maturity of a procedural material-driven approach spurs a need to shift from the dictations of how to explorations of why material efficiencies, bespoke aesthetics, and performativity are critical to a particular architecture, requiring an examination of linkages between approach, techniques, and process. The material system defines a branch of architectural research utilizing bespoke computational techniques to generate performative material capacities that are inextricably linked to both internal and external forces and energies. This paper examines such a self-referential view to define an expanded ecological approach that integrates new modes of design agency and shift the material system from closed-loop relationship with site to open-ended reciprocation with human behavior. The critical need for this capacity is shown in applications of novel textile hybrid material systems—as sensorially-responsive environments for children with the neurological autism spectrum disorder—in ongoing research titled Social Sensory Architectures. Through engaging fabrication across all material scales, manners of elastic responsivity are shown, through a series of feasibility studies, to exhibit a capacity for children to become design agents in exploring the beneficial interrelationship of sensorimotor agency and social behavior. The paper intends to contribute a theoretical approach by which novel structural capacities of a material system can support a larger ecology of social and behavioral agency.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2019_413
id	caadria2019_413
authors	Ahrens, Chandler, Chamberlain, Roger, Mitchell, Scott, Barnstorff, Adam and Gelbard, Joshua
year	2019
title	Controlling Daylight Reflectance with Cyber-physical Systems
doi	https://doi.org/10.52842/conf.caadria.2019.1.433
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 433-442
summary	Cyber-physical systems increasingly inform and alter the perception of atmospheric conditions within interior environments. The Catoptric Surface research project uses computation and robotics to precisely control the location of reflected daylight through a building envelope to form an image-based pattern of light on the building interior's surfaces. In an attempt to amplify or reduce spatial perception, the daylighting reflected onto architectural surfaces within a built environment generates atmospheric effects. The modification of light patterns mapped onto existing or new surfaces enables the perception of space to not rely on form alone. The mapping of a new pattern that is independent of architectural surfaces creates a visual effect of a formless atmosphere and holds the potential to affect the way people interact with the space. People need different amounts and quality of daylight depending on physiological differences due to age or the types of tasks they perform. This research argues for an informed luminous and atmospheric environment that is relative both to the user and more conceptual architectural aspirations of spatial perception controlled by a cyber-physical robotic faÃ§ade system.
keywords	Contextual; Computation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_318
id	ecaadesigradi2019_318
authors	Al Bondakji, Louna, Lammich, Anne-Liese and Werner, Liss C.
year	2019
title	ViBe (Virtual Berlin) - Immersive Interactive 3D Urban Data Visualization - Immersive interactive 3D urban data visualization
doi	https://doi.org/10.52842/conf.ecaade.2019.3.083
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 83-90
summary	The project investigates the possibility of visualizing open source data in a 3D interactive virtual environment. We propose a new tool, 'ViBe'. We programmed 'ViBe' using Unity for its compatibility with HTC VIVE glasses for virtual reality (VR). ViBe offers an abstract visualization of open source data in a 3D interactive environment. The ViBe environment entails three main topics a) inhabitants, b) environmental factors, and c) land-use; acting as representatives of parameters for cities and urban design. Berlin serves as a case study. The data sets used are divided according to Berlin's twelve administrative districts. The user immerses into the virtual environment where they can choose, using the HTC Vive controllers, which district (or Berlin as a whole) they want information for and which topics they want to be visualized, and they can also teleport back and forth between the different districts. The goal of this project is to represent different urban parameters an abstract simulation where we correlate the corresponding data sets. By experiencing the city through visualized data, ViBe aims to provide the user with a clearer perspective onto the city and the relationship between its urban parameters. ViBe is designed for adults and kids, urban planners, politicians and real estate developers alike.
keywords	3D-Visualization; open source data; immersive virtual reality; interactive ; Unity
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	cf2019_037
id	cf2019_037
authors	Aljammaz, Mohammed ; Tsung-Hsien Wang and Chengzhi Peng
year	2019
title	The influence of Saudi Arabian culture on energy use: Improving the time-use schedules in energy simulation for houses in Riyadh
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 273-289
summary	Culture influences the way that people act and behave in all societies. In Saudi Arabia, culture and beliefs directly influence the lifestyle and behaviour of its citizens. Culture also impacts on energy usage of buildings, but this factor is often excluded from energy use simulations. A consequence of this is a mismatch between energy prediction and real energy usage. This paper demonstrates how a time-use data (TUD) model can be used to create a more realistic estimate of energy consumption in Saudi Arabia. TUD has been collected through a survey of 300 people living in Riyadh. The performance of the computational TUD model is cross-referenced with empirical data and the outcomes are used to discuss how the TUD model can be applied more effectively in energy use simulations.
keywords	time-use data, energy simulation, energy use prediction, load schedules, occupant behaviours,
series	CAAD Futures
email
last changed	2019/07/29 14:15

_id	ecaadesigradi2019_061
id	ecaadesigradi2019_061
authors	Alkadri, Miktha Farid, De Luca, Francesco, Turrin, Michela and Sariyildiz, Sevil
year	2019
title	Making use of Point Cloud for Generating Subtractive Solar Envelopes
doi	https://doi.org/10.52842/conf.ecaade.2019.1.633
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 633-640
summary	As a contextual and passive design strategy, solar envelopes play a great role in determining building mass based on desirable sun access during the predefined period. With the rapid evolution of digital tools, the design method of solar envelopes varies in different computational platforms. However, current approaches still lack in covering the detailed complex geometry and relevant information of the surrounding context. This, consequently, affects missing information during contextual analysis and simulation of solar envelopes. This study proposes a subtractive method of solar envelopes by considering the geometrical attribute contained in the point cloud of TLS (terrestrial laser scanner) dataset. Integration of point cloud into the workflow of solar envelopes not only increases the robustness of final geometry of existing solar envelopes but also enhances awareness of architects during contextual analysis due to consideration of surface properties of the existing environment.
keywords	point cloud data; solar envelopes; subtractive method; solar access
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	caadria2019_005
id	caadria2019_005
authors	Alva, Pradeep, Janssen, Patrick and Stouffs, Rudi
year	2019
title	A Spatial Decision Support Framework For Planning - Creating Tool-Chains for Organisational Teams
doi	https://doi.org/10.52842/conf.caadria.2019.2.011
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 11-20
summary	In practice, most planners do not make significant use of planning support systems. Although significant research has been conducted, the focus tends to be on supporting individual tasks, and the outcomes are often the development of new stand-alone tools that are difficult to integrate into existing workflows. The knowledge contribution in this paper focuses on developing a novel spatial decision support framework focusing on the workflows and tool-chains that span across different teams within an organisation, with varying skill sets and objectives. In the proposed framework, the core decision-making process uses set decision parameters that are combined using a weighted decision tree. The framework is evaluated by developing and testing tool-chains for a real-world land suitability case study. The tool-chain was implemented on top of a GIS platform.
keywords	GIS SDSS PSS; Planning Automation; Geoprocessing; Data Analytics; Geoinformatics
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac201917403
id	ijac201917403
authors	Alva, Pradeep; Patrick Janssen and Rudi Stouffs
year	2019
title	Geospatial tool-chains: Planning support systems for organisational teams
source	International Journal of Architectural Computing vol. 17 - no. 4, 336-356
summary	In practice, most planners do not make significant use of planning support systems. Although extensive research has been conducted, the focus tends to be on supporting individual tasks, and the outcomes are often the development of new stand-alone tools that are difficult to integrate into existing workflows. The knowledge contribution in this article focuses on developing a novel spatial decision support framework focusing on the workflows and tool-chains that span across different teams with varying skill sets and objectives, within an organisation. In the proposed framework, the core decision-making process uses a set of decision parameters that are combined using a weighted decision tree. The framework is evaluated by developing and testing a workflow and GIS tool-chain for a real-world case study of land suitability and mixed-use potentiality analysis.
keywords	GIS, SDSS, PSS, planning automation, TOD, raster geoprocessing, data analytics, geoinformatics
series	journal
email
last changed	2020/11/02 13:34

_id	acadia19_490
id	acadia19_490
authors	Alvarez, Martín; Wagner, Hans Jakob; Groenewolt, Abel; Krieg, Oliver David; Kyjanek, Ondrej; Sonntag, Daniel; Bechert, Simon; Aldinger, Lotte; Menges, Achim; Knippers, Jan
year	2019
title	The Buga Wood Pavilion
doi	https://doi.org/10.52842/conf.acadia.2019.490
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 490-499
summary	Platforms that integrate developments from multiple disciplines are becoming increasingly relevant as the complexity of different technologies increases day by day. In this context, this paper describes an integrative approach for the development of architectural projects. It portrays the benefits of applying such an approach by describing its implementation throughout the development and execution of a building demonstrator. Through increasing the agility and extending the scope of existing computational tools, multiple collaborators were empowered to generate innovative solutions across the different phases of the project´s cycle. For this purpose, novel solutions for planar segmented wood shells are showcased at different levels. First, it is demonstrated how the application of a sophisticated hollow-cassette building system allowed the optimization of material use, production time, and mounting logistics due to the modulation of the parameters of each construction element. Second, the paper discusses how the articulation of that complexity was crucial when negotiating between multiple professions, interacting with different contractors, and complying with corresponding norms. Finally, the innovative architectural features of the resulting building are described, and the accomplishments are benchmarked through comparison with typological predecessor.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

For more results click below: