Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 78

Reformat results as: short short into frame detailed detailed into frame

_id	ijac201917105
id	ijac201917105
authors	Agkathidis, Asterios; Yorgos Berdos and André Brown
year	2019
title	Active membranes: 3D printing of elastic fibre patterns on pre-stretched textiles
source	International Journal of Architectural Computing vol. 17 - no. 1, 74-87
summary	There has been a steady growth, over several decades, in the deployment of fabrics in architectural applications; both in terms of quantity and variety of application. More recently, three-dimensional printing and additive manufacturing have added to the palette of technologies that designers in architecture and related disciplines can call upon. Here, we report on research that brings those two technologies together – the development of active membrane elements and structures. We show how these active membranes have been achieved by laminating three-dimensional printed elasto-plastic fibres onto pre-stretched textile membranes. We report on a set of experimentations involving one-, two- and multi-directional geometric arrangements that take TPU 95 and polypropylene filaments and apply them to Lycra textile sheets, to form active composite panels. The process involves a parameterised design, actualised through a fabrication process including stress-line simulation, fibre pattern three-dimensional printing and the lamination of embossed patterns onto a pre-stretched membrane; followed by the release of tension afterwards in order to allow controlled, self-generation of the final geometry. Our findings document the investigation into mapping between the initial two-dimensional geometries and their resulting three-dimensional doubly curved forms. We also reflect on the products of the resulting, partly serendipitous, design process.
keywords	Digital fabrication, three-dimensional printing, parametric design, material computation, fabrics
series	journal
email
last changed	2019/08/07 14:04

_id	ecaadesigradi2019_619
id	ecaadesigradi2019_619
authors	Beyer, Bastian, Suárez, Daniel and Palz, Norbert
year	2019
title	Microbiologically Activated Knitted Composites - Reimagining a column for the 21st century
doi	https://doi.org/10.52842/conf.ecaade.2019.2.541
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 541-552
summary	A column is an archetypal constituent of architecture which historically underwent constant reiteration in accordance with the prevalent architectural style, material culture or technical and structural possibilities. The project reimagined this architectural element through harnessing the synergies of digital design, textile logic, and contemporary biotechnology. Textile materiality and aesthetic are deeply rooted in architectural history as a soft and ephemeral antipode to rigid building materials. An investigation in historic mechanical hand-knitting techniques allowed to extract their underlying structural and geometric logic to develop a structural optimisation pipeline with a graded yarn as a base material and a geometric optimization based on local distribution of knitting patterns. Bacterially driven biocalcification was applied to transform the soft textile structure into a rigid material. Hereby an active textile microbiome was established through colonizing of the yarn with the bacterium S. pasteurii which successively precipitated calcite on microscale within the textile substrate hence ultimately influencing the global structural behaviour of the column.
keywords	textile microbiome; material customization; knitting; yarn augmentation
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	ecaadesigradi2019_510
id	ecaadesigradi2019_510
authors	Giannopoulou, Effima, Baquero, Pablo, Warang, Angad, Orciuoli, Affonso and T. Estévez, Alberto
year	2019
title	Stripe Segmentation for Branching Shell Structures - A Data Set Development as a Learning Process for Fabrication Efficiency and Structural Performance
doi	https://doi.org/10.52842/conf.ecaade.2019.3.063
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 63-70
summary	This article explains the evolution towards the subject of digital fabrication of thin shell structures, searching for the computational design techniques which allow to implement biological pattern mechanisms for efficient fabrication procedures. The method produces data sets in order to analyse and evaluate parallel alternatives of branching topologies, segmentation patterns, material usage, weight and deflection values as a user learning process. The importance here is given to the selection of the appropriate attributes, referring to which specific geometric characteristics of the parametric model are affecting each other and with what impact. The outcomes are utilized to train an Artificial Neural Network to predict new building information based on new combinations of desired parameters so that the user can decide and adjust the design based on the new information.
keywords	Digital Fabrication; Shell Structures; Segmentation; Machine Learning; Branching Topologies; Bio-inspired
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:51

_id	caadria2019_398
id	caadria2019_398
authors	Hannouch, Adam
year	2019
title	Acoustic Simulation and Conditioning in Vaulted Structures - Faceted Stereotomic Strategies for Multi-listener Spaces
doi	https://doi.org/10.52842/conf.caadria.2019.1.403
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 403-412
summary	This paper examines faceted tessellations in an acoustic vault ceiling typology for the enhancement of human speech comfort in multi-listener environments. Geometric modelling explores simulated results for various tessellation arrangements within the overall segmentation of a global ceiling geometry. Where pattern-based design for acoustic surfaces often overlooks the optimisation of vault typologies, the tests demonstrated in this research seek a trade-off between acoustic properties and faceted detailing. This involves the performance-based design of micro joint topologies and ruled-surface geometries, and a macro-analysis of the vaulted surface for acoustic studies embedded into this workflow, using Pachyderm software.
keywords	Architectural Acoustics; Mutli-listener Environments; Simulation; Faceted Patterns; Vaulted Design
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2019_437
id	caadria2019_437
authors	Liao, Pan, Gu, Ning, Brisbin, Chris, Rofe, Matthew and Soltani, Sahar
year	2019
title	Computationally Mapping Spatial Properties of Chinese Historic Towns using Space Syntax
doi	https://doi.org/10.52842/conf.caadria.2019.1.361
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 361-370
summary	Due to its geographic size and long cultural history of fluctuating borders, China has a large number of historic settlements; each with their own unique geometric, cultural, social, and spatial characteristics. Despite the various studies that have attempted to qualitatively describe the spatial properties of historic towns, there are limited attempts to understand the spatial qualities of these towns through a quantitative approach, such as space syntax. This paper proposes and demonstrates a computational approach based on space syntax to map spatial properties of these towns. Four spatial features are examined and evaluated to capture the spatial patterns of Chinese historic towns: (1) axiality, (2) curvature, (3) intelligibility, and (4) synergy. The approach has been applied to four typical towns in China: Pingyao, Lijiang, Kulangsu, and Wuzhen. This computational approach provides a new way to complement existing qualitative measures of understanding the urban form and use of historic towns, providing a powerful tool to support the development of policy affecting historic town design/planning, heritage conservation, and heritage tourism.
keywords	Chinese historic towns; spatial properties; space syntax
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	cf2019_064
id	cf2019_064
authors	Noronha Pinto de Oliveira E Sousa, Marcela and Maria Gabriela Caffarena Celani
year	2019
title	Towards Urban Densification Using Shape Grammar to Develop Components for Retrofitting Street Design
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 505
summary	Cities will have to become denser to accommodate expanding urban populations, creating a challenge for urban mobility. Existing urban infrastructure must be retrofitted to promote the use of collective and active modes of transportation. This article presents a prescriptive grammar, for retrofitting urban street design in the context of densification, based on patterns extracted from current guides and manuals. This prescriptive grammar is a crossover between concepts of shape grammar and pattern language, joining generative capabilities of geometric shape grammars with descriptive and prescriptive approaches commonly referred to as design patterns. An example is presented to illustrate its application.
keywords	Shape Grammar, Parametric Urbanism, Travel Behavior
series	CAAD Futures
email
last changed	2019/07/29 14:18

_id	caadria2019_354
id	caadria2019_354
authors	Cheddadi, Mohammed Aqil, Hotta, Kensuke and Ikeda, Yasushi
year	2019
title	An Urban Form-Finding Parametric Model Based on the Study of Spontaneous Urban Tissues
doi	https://doi.org/10.52842/conf.caadria.2019.2.181
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 181-190
summary	This research paper investigates the peculiarities of unplanned urban fabrics known for developing in a spontaneous way. By studying the characteristics of their urban form, a set of rules, functions, and objectives used for an experimental urban form-finding model are explored. Based on these features, the development of a parametric model seeks to grasp certain characteristics of spontaneous urban tissues in old Islamic cities and incorporate them into an experimental social housing proposal. By the use of genetic algorithms, the model aims to offer better adaptability and more diversification which will be to while still keeping a degree of preservation to the distinctive aspects that define those settlements. The use of a genetic solver is expected to be a problem-solving method that can simulate and offer a wide range of objective-based spatial that are considerably adaptive to particular urban contexts. In this study, we discuss the defining aspects and constituents of the urban form of these settings before interpreting them into algorithmic components to be incorporated in a parametric model.
keywords	Spontaneous Urban tissues; Urban form-finding; Genetic algorithms; Islamic cities; Multiple-objective optimization
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia20_202p
id	acadia20_202p
authors	Battaglia, Christopher A.; Verian, Kho; Miller, Martin F.
year	2020
title	DE:Stress Pavilion
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 202-207
summary	Print-Cast Concrete investigates concrete 3D printing utilizing robotically fabricated recyclable green sand molds for the fabrication of thin shell architecture. The presented process expedites the production of doubly curved concrete geometries by replacing traditional formwork casting or horizontal corbeling with spatial concrete arching by developing a three-dimensional extrusion path for deposition. Creating robust non-zero Gaussian curvature in concrete, this method increases fabrication speed for mass customized elements eliminating two-part mold casting by combining robotic 3D printing and extrusion casting. Through the casting component of this method, concrete 3D prints have greater resolution along the edge condition resulting in tighter assembly tolerances between multiple aggregated components. Print-Cast Concrete was developed to produce a full-scale architectural installation commissioned for Exhibit Columbus 2019. The concrete 3D printed compression shell spanned 12 meters in length, 5 meters in width, and 3 meters in height and consisted of 110 bespoke panels ranging in weight of 45 kg to 160 kg per panel. Geometrical constraints were determined by the bounding box of compressed sand mold blanks and tooling parameters of both CNC milling and concrete extrusion. Using this construction method, the project was able to be assembled and disassembled within the timeframe of the temporary outdoor exhibit, produce <1% of waste mortar material in fabrication, and utilize 60% less material to construct than cast-in-place construction. Using the sand mold to contain geometric edge conditions, the Print-Cast technique allows for precise aggregation tolerances. To increase the pavilions resistance to shear forces, interlocking nesting geometries are integrated into each edge condition of the panels with .785 radians of the undercut. Over extruding strategically during the printing process casts the undulating surface with accuracy. When nested together, the edge condition informs both the construction logic of the panel’s placement and orientation for the concrete panelized shell.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	ijac201917103
id	ijac201917103
authors	Bejarano, Andres; and Christoph Hoffmann
year	2019
title	A generalized framework for designing topological interlocking configurations
source	International Journal of Architectural Computing vol. 17 - no. 1, 53-73
summary	A topological interlocking configuration is an arrangement of pieces shaped in such a way that the motion of any piece is blocked by its neighbors. A variety of interlocking configurations have been proposed for convex pieces that are arranged in a planar space. Published algorithms for creating a topological interlocking configuration start from a tessellation of the plane (e.g. squares colored as a checkerboard). For each square S of one color, a plane P through each edge E is considered, tilted by a given angle ? against the tessellated plane. This induces a face F supported by P and limited by other such planes nearby. Note that E is interior to the face. By adjacency, the squares of the other color have similarly delimiting faces. This algorithm generates a topological interlocking configuration of tetrahedra or antiprisms. When checked for correctness (i.e. for no overlap), it rests on the tessellation to be of squares. If the tessellation consists of rectangles, then the algorithm fails. If the tessellation is irregular, then the tilting angle is not uniform for each edge and must be determined, in the worst case, by trial and error. In this article, we propose a method for generating topological interlocking configurations in one single iteration over the tessellation or mesh using a height value and a center point type for each tile as parameters. The required angles are a function of the given height and selected center; therefore, angle choices are not required as an initial input. The configurations generated using our method are compared against the configurations generated using the angle-choice approach. The results show that the proposed method maintains the alignment of the pieces and preserves the co-planarity of the equatorial sections of the pieces. Furthermore, the proposed method opens a path of geometric analysis for topological interlocking configurations based on non-planar tessellations.
keywords	Topological interlocking, surface tessellation, irregular geometry, parametric design, convex assembly
series	journal
email
last changed	2019/08/07 14:04

_id	ecaadesigradi2019_498
id	ecaadesigradi2019_498
authors	Bermek, Mehmet Sinan, Shelden, Dennis and Gentry, T. Russel
year	2019
title	A Holistic Approach to Feature-based Structural Mapping in Cross Laminated Timber Buildings
doi	https://doi.org/10.52842/conf.ecaade.2019.2.789
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 789-796
summary	Mass Engineered Timber products provide a unique opportunity in configuring panelized building systems that are suitable for both prefabrication and onsite customization. The structural nature of these large section elements also brings about the need for a coordinated design-fabrication-assembly workflow. These products can assume different geometric configurations and their behaviour can be approximated globally by simplifying framing schemas. Current BIM Interoperability standards such as STEP or IFC already acknowledge and support the interconnected nature of component properties, yet these Data Models are component focused. Expanding on the relationships between components and using sets to define part to whole, or exteriority relationships could yield a more flexible and agile querying of building information.This would be a framework fit for automated feature derivation and rule based design applications. To this end Graph structures and Graph Databases, alongside existing ontology authoring tools are studied to probe new cognitive possibilities in collaborative AEC workflows
keywords	Graph theory; BIM; CLT; IFC
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	ecaadesigradi2019_110
id	ecaadesigradi2019_110
authors	Bernal, Marcelo, Marshall, Tyrone, Okhoya, Victor, Chen, Cheney and Haymaker, John
year	2019
title	Parametric Analysis versus Intuition - Assessment of the effectiveness of design expertise
doi	https://doi.org/10.52842/conf.ecaade.2019.2.103
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 103-110
summary	This paper explores through professional case studies how design solutions produced by expert teams compares to those developed through systematic parametric analysis. While the expert intuition of either single designer or teams helps to rapidly identify relevant aspects of the design problem and produce viable solutions, it has limitation to address multi-criteria design problems with conflicting objectives and searching for design alternatives. On the other hand, parametric analysis techniques in combination with data analysis methods helps to construct and analyze large design spaces of potential design solutions. For the purpose of this study, the specifications of geometric features and material properties of the building envelopes proposed by the expert design teams define the base line to measure the extent of the performance improvements of two typically conflicting objectives: Daylight quality and energy consumption. The results show consistently significant performance improvement after systematic optimization.
keywords	Performance Analysis; Parametric Analysis; Design Space; Design Expertise; Optimization
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	ecaadesigradi2019_555
id	ecaadesigradi2019_555
authors	Bomfim, Kyane and Tavares, Felipe
year	2019
title	Building facade optimization for maximizing the incident solar radiation
doi	https://doi.org/10.52842/conf.ecaade.2019.2.171
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 171-180
summary	The technological breakthrough on photovoltaic facades and the high potential for installing photovoltaic (PV) systems in the city of Salvador are the motivation for this article. This case study explores the feasibility of implementing solar energy technology on a building facade, proposing a design method for optimizing insolation performance by the form-finding process in a parameterized shape. The goal was to generate a parametric design workflow, in which it could be found some facade shapes, generating triangle and quadrilateral supporting grids, leading to better results in the total amount of radiation in comparison to the basic flat facade. In these supporting grids were evaluated also the fitting in the distribution of quadrilateral commercial PV cells, measuring its geometric compatibility. By the results, it could be verified the gains and losses in PV potential in several instances obtained by the form-finding process, as the potentials to consider this in the design of every building.
keywords	Radiation skydome; Shape parameterization; Form-finding; Genetic Algorithm; PV facade
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	cf2019_021
id	cf2019_021
authors	Cheng, Chi-Li and June-Hao Hou
year	2019
title	A Method of Mesh Simplification for Drone 3D Modeling with Architectural Feature Extraction
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 169
summary	This paper proposes a method of mesh simplification for 3D terrain or city models generated photogrammetrically from drone captured images, enabled by the ability of extracting the architectural features. Compare to traditional geometric computational method, the proposed method recognizes and processes the features from the architectural perspectives. In addition, the workflow also allows exporting the simplified models and geometric features to open platforms, e.g. OpenStreetMap, for practical usages in site analysis, city generation, and contributing to the open data communities.
keywords	Mesh Reconstruction, photogrammetry, mesh simplification, procedural mode, machine learning
series	CAAD Futures
email
last changed	2019/07/29 14:08

_id	ecaadesigradi2019_249
id	ecaadesigradi2019_249
authors	Chiarella, Mauro, Gronda, Luciana and Veizaga, Martín
year	2019
title	RILAB - architectural envelopes - From spatial representation (generative algorithm) to geometric physical optimization (scientific modeling)
doi	https://doi.org/10.52842/conf.ecaade.2019.3.017
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 17-24
summary	Augmented graphical thinking operates by integrating algorithmic, heuristic, and manufacturing processes. The Representation and Ideation Laboratory (RILAB-2018) exercise begins with the application of a parametric definition developed by the team of teachers, allowing for the construction of structural systems by the means of the combination of segmental shells and bending-active. The main objetive is the construction of a scientific model of simulation for bending-active laminar structures has brought into reality trustworthy previews for architectural envelopes through the interaction of parametrized relational variables. This way we put designers in a strategic role for the building of the pre-analysis models, allowing more preciseness at the time of picking and defining materials, shapes, spaces and technologies and thus minimizing the decisions based solely in the definition of structural typological categories, local tradition or direct experience. The results verify that the strategic integration of models of geometric physical optimization and spatial representation greatly expand the capabilities in the construction of the complex system that operates in the act of projecting architecture.
keywords	architectural envelopes; augmented graphic thinking; geometric optimization; bending-active
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	acadia19_642
id	acadia19_642
authors	Chua, Pamela Dychengbeng; Hui, Lee Fu
year	2019
title	Compliant Laminar Assemblies
doi	https://doi.org/10.52842/conf.acadia.2019.642
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 642-653
summary	This paper presents an innovative approach to the design and fabrication of three-dimensional objects from single-piece flat sheets, inspired by the origami technique of twist-closing. While in origami twist-closing is merely used to stabilize a cylindrical or spherical structure, ensuring it maintains its shape, this research investigates the potential of twist-closing as a multi-functional mechanism that also activates and controls the transformation of a planar surface into a predesigned three-dimensional form. This exploration is directed towards an intended application to stiff and brittle sheet materials that are difficult to shape through other processes. The methods we have developed draw mainly upon principles of lattice kirigami and laminar reciprocal structures. These are reflected in a workflow that integrates digital form-generation and fabrication-rationalization techniques to reference and apply these principles at every stage. Significant capabilities of the developed methodology include: (1) achievement of pseudo-double-curvature with brittle, stiff sheet materials; (2) stabilization in a 3D end-state as a frameless self-contained single-element laminar reciprocal structure—essentially a compliant mechanism; and (3) an ability to pre-encode 3D assembly constraints in a 2D cutout pattern, which guides a moldless fabrication process. The paper reviews the precedent geometric techniques and principles that comprise this method of 3D surface fabrication and describes a sample deployment of the method as applied to the design of laminar modules made of high-pressure laminate (HPL).
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	caadria2019_493
id	caadria2019_493
authors	Fischer, Thomas, Herr, Christiane M. and Grau, Michael
year	2019
title	Triangulated Shell Foam Structures based on Robotic Hot-Wire-Cutting - A design, geometry rationalisation and fabrication workflow
doi	https://doi.org/10.52842/conf.caadria.2019.2.551
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 551-560
summary	This paper presents an interim report of an investigation into a digital design and production workflow to generate, rationalise and fabricate triangulated extruded shell foam structures. It reports on a speculative form-finding and geometry-generation process, a rationalisation approach, a new type of hot-wire-cutting robot and early findings gathered regarding technical and design strategies, geometric and fabrication constraints, as well as an outline of related future work.
keywords	generative design; geometry rationalisation; hot wire cutting; robotic fabrication; process automation
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaadesigradi2019_176
id	ecaadesigradi2019_176
authors	Giantini, Guilherme, Negris de Souza, Larissa, Turczyn, Daniel and Celani, Gabriela
year	2019
title	Environmental Ceramics - Merging the digital and the physical in the design of a performance -based facade system
doi	https://doi.org/10.52842/conf.ecaade.2019.2.749
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 749-758
summary	Environmental comfort and space occupancy are essential considerations in architectural design process. Façade systems deeply impact both aspects but are usually standardized. However, performance-based facade systems tackle these issues through computational design to devise non-homogeneous elements. This work proposes a ceramic facade system designed according to a performance-based process grounded on environmental analysis and parametric design to allow adaptation and geometric variation according to specific building demands on environmental comfort and functionality. In this process, the Design Science Research method guided the exploration of both design and evaluation, bridging the gap between theory and practice. Positive facade environmental performance were found from digital and physical models assessment in terms of radiation, illuminance, dampness (with ventilation) and temperature. Computational processes minimized radiation inside the building while maximized illuminance. Their association influenced on operative temperature, which dropped according to local dampness and material absorption. Accordingly, this design process associates not only environmental comfort and functionality concepts but also adaptability, flexibility, mass customization, personal fabrication, additive manufacturing concepts, being an example architectural design changes in the 4th Industrial Revolution.
keywords	sustainable design; facade system; computational design; environmental analysis; evolutionary algorithm
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:51

_id	ecaadesigradi2019_149
id	ecaadesigradi2019_149
authors	Gonzalez-Quintial, Francisco and Martin-Pastor, Andres
year	2019
title	Convolutas - Developable strips and digital fabricated lightweight architecture
doi	https://doi.org/10.52842/conf.ecaade.2019.1.585
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 585-594
summary	The present research is mainly focused on the development of a system that would be able to offer the potentiality of constructing free-form surfaces by using developable surfaces. Through a deep revision of pre-computational traditional geometric systems based on the classical Descriptive Geometry, after a re-interpretation that design and algorithmic generation tools allow by using computers and digital fabrication hardware as testing ground, a geometric control process has been designed in order to offer the possibility of managing double-curvature complex forms and their adaptation by using developable surfaces. The focal point of this system is proving how developable surfaces are suitable to build architectonical elements at real scale.
keywords	Geometry; Developable Surfaces; Algorithmic Approach; Digital Fabrication
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:51

For more results click below: