Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 617

Reformat results as: short short into frame detailed detailed into frame

_id	acadia19_90
id	acadia19_90
authors	Forward, Kristen; Taron, Joshua
year	2019
title	Waste Ornament
doi	https://doi.org/10.52842/conf.acadia.2019.090
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 90-99
summary	The emergence of computational design and fabrication tools has escalated the potentials of architectural ornamentation to become innovative, beautiful, and highly sustainable. Historically, ornament has been known to express character and reveal relationships between materiality, technological advances, and societal evolution. But ornament rapidly declined in the late 1800s in large part due to mechanization and modernist ideals of uniform, unadorned façade components. However, ornamentation in architecture has recently reappeared—a development that can be linked closely to advancements in computational design and digital fabrication. While these advancements offer the ability to create expressive architecture, their potential contribution to the improvement of sustainable architecture has largely been overlooked (Augusti-Juan and Habert 2017). This paper provides a brief revisitation to the history of ornament and investigates the impact of computation and automation on the production of contemporary ornament. The paper also attempts to catalog examples of how designers have used computational technologies to address the growing criticality of environmental concerns. Moreover, the paper presents the Waste Ornament project, a research platform that critically examines how we can leverage technology to augment the visual and sustainable performance of facade ornamentation to reduce energy use in buildings. Three sub-projects are identified as territories for further research into sustainable ornamentation, ranging from material sourcing, to high-performance buildings, to the development of a systematic upcycling process that transforms old facades into new ones. While the examples are not exhaustive, they attempt to interlace the general ideas of waste and ornament by addressing particular issues that converge at building envelopes.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	caadria2019_546
id	caadria2019_546
authors	Holzer, Dominik
year	2019
title	Teaching Computational Design and BIM in the Age of (Semi)flipped Classrooms
doi	https://doi.org/10.52842/conf.caadria.2019.2.715
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 715-724
summary	With academic curricula for architectural education increasingly packed with new and expanding fields of inquiry, questions emerge on how to incorporate the ever-growing number of subjects that tackle the use of computational tools for design and delivery. This paper analyses approaches to blended learning under a semi-flipped classroom model where learning content gets divided into complementary in-class and online components. The author describes the epistemological challenges in curating the blended-learning mix and discusses ways to optimise learning outcomes while minimising the effort for custom content-development of training material. Two subjects taught at the author's home institution (one in Computational Design and the other for BIM education) serve as case studies to test the flipped classroom approach and to derive feedback from students about their preferred method of delivery.
keywords	BIM; Flipped-Classroom; Computational Design; Education; Online learning
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia19_310
id	acadia19_310
authors	Leblanc, Maxime; Vardouli, Theodora
year	2019
title	Bursting the Bubble
doi	https://doi.org/10.52842/conf.acadia.2019.310
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 310-319
summary	The “bubble" is an oft-used keyword in discussions about Virtual Reality (VR) and Virtual Environments (VE). Apart from pointing to the growing, yet precarious, rise of these domains in technology markets, the “bubble" is also a prolific metaphor for spatial, experiential, and technical aspects of virtual worlds. Combining material from architectural history and history of computing, this paper situates and critically activates two threads of the “bubble" metaphor: the bubble as a closed, autonomous system severed from its surroundings, and the bubble as an ubiquitous, limitless environment. Through historical episodes from the development of Head Mounted Displays (HMDs), the paper positions current VR HDMs into a genealogy of miniaturization of actual architectural “bubbles”— from military simulation domes to wearable “micro environments”—and examines the techniques that support the illusion of these closed, autonomous worlds as limitless and ubiquitous. The paper concludes with the description of a critical design project that exposes the limits of VR's limitless worlds and the role of context (physical, architectural) in both making and breaking the VR bubble.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ecaadesigradi2019_308
id	ecaadesigradi2019_308
authors	Yetkin, Ozan and Gönenç Sorguç, Arzu
year	2019
title	Design Space Exploration of Initial Structural Design Alternatives via Artificial Neural Networks
doi	https://doi.org/10.52842/conf.ecaade.2019.1.055
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 55-60
summary	Increasing implementation of digital tools within a design process generates exponentially growing data in each phase, and inevitably, decision making within a design space with increasing complexity will be a great challenge for the designers in the future. Hence, this research aimed to seek potentials of captured data within a design space and solution space of a truss design problem for proposing an initial novel approach to augment capabilities of digital tools by artificial intelligence where designers are allowed to make a wise guess within the initial design space via performance feedbacks from the objective space. Initial structural design and modelling phase of a truss section was selected as a material of this study since decisions within this stage affect the whole process and performance of the end product. As a method, a generic framework was proposed that can help designers to understand the trade-offs between initial structural design alternatives to make informed decisions and optimizations during the initial stage. Finally, the proposed framework was presented in a case study, and future potentials of the research were discussed.
keywords	design space; objective space; structural design; artificial intelligence; machine learning; optimization
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:57

_id	cf2019_052
id	cf2019_052
authors	Abdelmohsen, Sherif ;Passaint Massoud, Rana El-Dabaa, Aly Ibrahim and Tasbeh Mokbel
year	2019
title	The Effect of Hygroscopic Design Parameters on the Programmability of Laminated Wood Composites for Adaptive Façades
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 435
summary	Typical adaptive façades respond to external conditions to enhance indoor spaces based on complex mechanical actuators and programmable functions. Hygroscopic embedded properties of wood, as low-cost low-tech programmable material, have been utilized to induce passive motion mechanisms. Wood as anisotropic material allows for different passive programmable motion configurations that relies on several hygroscopic design parameters. This paper explores the effect of these parameters on programmability of laminated wood composites through physical experiments in controlled humidity environment. The paper studies variety of laminated configurations involving different grain orientations, and their effect on maximum angle of deflection and its durability. Angle of deflection is measured using image analysis software that is used for continuous tracking of deflection in relation to time. Durability is studied as the number of complete programmable cycles that wood could withstand before reaching point of failure. Results revealed that samples with highest deflection angle have least programmability durability.
keywords	Wood, hygroscopic design, lamination, deflection, durability, adaptive façades
series	CAAD Futures
email
last changed	2019/07/29 14:18

_id	caadria2019_660
id	caadria2019_660
authors	Aghaei Meibodi, Mania, Giesecke, Rena and Dillenburger, Benjamin
year	2019
title	3D Printing Sand Molds for Casting Bespoke Metal Connections - Digital Metal: Additive Manufacturing for Cast Metal Joints in Architecture
doi	https://doi.org/10.52842/conf.caadria.2019.1.133
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 133-142
summary	Metal joints play a relevant role in space frame constructions, being responsible for large amount of the overall material and fabrication cost. Space frames which are constructed with standardized metal joints are constrained to repetitive structures and topologies. For customized space frames, the fabrication of individual metal joints still remains a challenge. Traditional fabrication methods such as sand casting are labour intensive, while direct 3D metal printing is too expensive and slow for the large volumes needed in architecture.This research investigates the use of Binder Jetting technology to 3D print sand molds for casting bespoke metal joints in architecture. Using this approach, a large number of custom metal joints can be fabricated economically in short time. By automating the generation of the joint geometry and the corresponding mold system, an efficient digital process chain from design to fabrication is established. Several design studies for cast metal joints are presented. The approach is successfully tested on the example of a full scale space frame structure incorporating almost two hundred custom aluminum joints.
keywords	3D printing; binder jetting; sand casting; metal joints; metal casting; space frame; digital fabrication; computational design; lightweight; customization
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac201917105
id	ijac201917105
authors	Agkathidis, Asterios; Yorgos Berdos and André Brown
year	2019
title	Active membranes: 3D printing of elastic fibre patterns on pre-stretched textiles
source	International Journal of Architectural Computing vol. 17 - no. 1, 74-87
summary	There has been a steady growth, over several decades, in the deployment of fabrics in architectural applications; both in terms of quantity and variety of application. More recently, three-dimensional printing and additive manufacturing have added to the palette of technologies that designers in architecture and related disciplines can call upon. Here, we report on research that brings those two technologies together – the development of active membrane elements and structures. We show how these active membranes have been achieved by laminating three-dimensional printed elasto-plastic fibres onto pre-stretched textile membranes. We report on a set of experimentations involving one-, two- and multi-directional geometric arrangements that take TPU 95 and polypropylene filaments and apply them to Lycra textile sheets, to form active composite panels. The process involves a parameterised design, actualised through a fabrication process including stress-line simulation, fibre pattern three-dimensional printing and the lamination of embossed patterns onto a pre-stretched membrane; followed by the release of tension afterwards in order to allow controlled, self-generation of the final geometry. Our findings document the investigation into mapping between the initial two-dimensional geometries and their resulting three-dimensional doubly curved forms. We also reflect on the products of the resulting, partly serendipitous, design process.
keywords	Digital fabrication, three-dimensional printing, parametric design, material computation, fabrics
series	journal
email
last changed	2019/08/07 14:04

_id	acadia19_630
id	acadia19_630
authors	Ahlquist, Sean
year	2019
title	Expanding the Systematic Agencyof a Material System
doi	https://doi.org/10.52842/conf.acadia.2019.630
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 630-641
summary	Computational design and fabrication have reached an accomplished level of ubiquity and proficiency in the field of architecture, in both academia and practice. Materiality driving structure, responsiveness, and spatial organization can be seen to evolve, in kind, with the capabilities to fabricate deeper material hierarchies. Such maturity of a procedural material-driven approach spurs a need to shift from the dictations of how to explorations of why material efficiencies, bespoke aesthetics, and performativity are critical to a particular architecture, requiring an examination of linkages between approach, techniques, and process. The material system defines a branch of architectural research utilizing bespoke computational techniques to generate performative material capacities that are inextricably linked to both internal and external forces and energies. This paper examines such a self-referential view to define an expanded ecological approach that integrates new modes of design agency and shift the material system from closed-loop relationship with site to open-ended reciprocation with human behavior. The critical need for this capacity is shown in applications of novel textile hybrid material systems—as sensorially-responsive environments for children with the neurological autism spectrum disorder—in ongoing research titled Social Sensory Architectures. Through engaging fabrication across all material scales, manners of elastic responsivity are shown, through a series of feasibility studies, to exhibit a capacity for children to become design agents in exploring the beneficial interrelationship of sensorimotor agency and social behavior. The paper intends to contribute a theoretical approach by which novel structural capacities of a material system can support a larger ecology of social and behavioral agency.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia19_490
id	acadia19_490
authors	Alvarez, Martín; Wagner, Hans Jakob; Groenewolt, Abel; Krieg, Oliver David; Kyjanek, Ondrej; Sonntag, Daniel; Bechert, Simon; Aldinger, Lotte; Menges, Achim; Knippers, Jan
year	2019
title	The Buga Wood Pavilion
doi	https://doi.org/10.52842/conf.acadia.2019.490
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 490-499
summary	Platforms that integrate developments from multiple disciplines are becoming increasingly relevant as the complexity of different technologies increases day by day. In this context, this paper describes an integrative approach for the development of architectural projects. It portrays the benefits of applying such an approach by describing its implementation throughout the development and execution of a building demonstrator. Through increasing the agility and extending the scope of existing computational tools, multiple collaborators were empowered to generate innovative solutions across the different phases of the project´s cycle. For this purpose, novel solutions for planar segmented wood shells are showcased at different levels. First, it is demonstrated how the application of a sophisticated hollow-cassette building system allowed the optimization of material use, production time, and mounting logistics due to the modulation of the parameters of each construction element. Second, the paper discusses how the articulation of that complexity was crucial when negotiating between multiple professions, interacting with different contractors, and complying with corresponding norms. Finally, the innovative architectural features of the resulting building are described, and the accomplishments are benchmarked through comparison with typological predecessor.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia19_596
id	acadia19_596
authors	Anton, Ana; Yoo, Angela; Bedarf, Patrick; Reiter, Lex; Wangler, Timothy; Dillenburger, Benjamin
year	2019
title	Vertical Modulations
doi	https://doi.org/10.52842/conf.acadia.2019.596
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 596-605
summary	The context of digital fabrication allows architects to reinvestigate material, process and the design decisions they entail to explore novel expression in architecture. This demands a new approach to design thinking, as well as the relevant tools to couple the form of artefacts with the process in which they are made. This paper presents a customised computational design tool developed for exploring the novel design space of Concrete Extrusion 3D Printing (CE3DP), enabling a reinterpretation of the concrete column building typology. This tool allows the designer to access generative engines such as trigonometric functions and mesh subdivision through an intuitive graphical user interface. Balancing process efficiency as understood by our industry with a strong design focus, we aim to articulate the unique architectural qualities inherent to CE3DP, energising much needed innovation in concrete technology.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia19_338
id	acadia19_338
authors	Aviv, Dorit; Houchois, Nicholas; Meggers, Forrest
year	2019
title	Thermal Reality Capture
doi	https://doi.org/10.52842/conf.acadia.2019.338
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 338-345
summary	Architectural surfaces constantly emit radiant heat fluxes to their surroundings, a phenomenon that is wholly dependent on their geometry and material properties. Therefore, the capacity of 3D scanning techniques to capture the geometry of building surfaces should be extended to sense and capture the surfaces’ thermal behavior in real time. We present an innovative sensor, SMART (Spherical-Motion Average Radiant Temperature Sensor), which captures the thermal characteristics of the built environment by coupling laser geometry scanning with infrared surface temperature detection. Its novelty lies in the combination of the two sensor technologies into an analytical device for radiant temperature mapping. With a sensor-based dynamic thermal-surface model, it is possible to achieve representation and control over one of the major factors affecting human comfort. The results for a case-study of a 3D thermal scan conducted in the recently completed Lewis Center for the Arts at Princeton University are compared with simulation results based on a detailed BIM model of the same space.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia19_208
id	acadia19_208
authors	Baghi, Ali; Baghi, Aryan; Kalantari, Saleh
year	2019
title	FLEXI-NODE
doi	https://doi.org/10.52842/conf.acadia.2019.207
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 207-218
summary	This paper is part of an ongoing research project on flexible molds for use in concrete fabrication. It continues and advances the concept of adjustable molds by creating a flexible system to produce a variety of concrete grid-joints. This reusable and adaptive mold streamlines the process of fabricating inherently diverse nodal joints without the need for cost-intensive mass-customization methods. The paper also proposes a novel way to cope with some of the significant drawbacks of similar mold techniques that have been explored and found wanting in similar projects. The technique used for the mold in the current research is inspired by a flexible mechanism that has been implemented in other manufacturing contexts, such as expansion joints and bendable straws. The outcomes of the project are a platform called “Flexi-node” and relevant software components that allow users to computationally design and fabricate a great variety of concrete joints for grid structures, using just one mold, with minimum material waste and no distortion from hydrostatic pressure.
keywords	flexible molds, nodal joints, computational design, concrete fabrication, mass customization, grid structures
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia23_v1_196
id	acadia23_v1_196
authors	Bao, Ding Wen; Yan, Xin; Min Xie, Yi
year	2023
title	Intelligent Form
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 196-201.
summary	InterLoop employs previously developed workflows that enable multi-planar robotic bending of metal tubes with high accuracy and repeatability (Huang and Spaw 2022). The scale and complexity is managed by employing augmented reality (AR) technology in two capacities, fabrication and assembly (Jahn et al. 2018; Jahn, Newnham, and Berg 2022). The AR display overlays part numbers, bending sequences, expected geometry, and robot movements in real time as the robot fabrication is occurring. For assembly purposes, part numbers, centerlines, and their expected positional relationships are projected via quick response (QR) codes spatially tracked by the Microsoft Hololens 2 (Microsoft 2019). This is crucial due to the length and self-similarity of complex multi-planar parts that make them difficult to distinguish and orient correctly. Leveraging augmented reality technology and robotic fabrication uncovers a novel material expression in tubular structures with bundles, knots, and interweaving (Figure 1).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	acadia20_202p
id	acadia20_202p
authors	Battaglia, Christopher A.; Verian, Kho; Miller, Martin F.
year	2020
title	DE:Stress Pavilion
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 202-207
summary	Print-Cast Concrete investigates concrete 3D printing utilizing robotically fabricated recyclable green sand molds for the fabrication of thin shell architecture. The presented process expedites the production of doubly curved concrete geometries by replacing traditional formwork casting or horizontal corbeling with spatial concrete arching by developing a three-dimensional extrusion path for deposition. Creating robust non-zero Gaussian curvature in concrete, this method increases fabrication speed for mass customized elements eliminating two-part mold casting by combining robotic 3D printing and extrusion casting. Through the casting component of this method, concrete 3D prints have greater resolution along the edge condition resulting in tighter assembly tolerances between multiple aggregated components. Print-Cast Concrete was developed to produce a full-scale architectural installation commissioned for Exhibit Columbus 2019. The concrete 3D printed compression shell spanned 12 meters in length, 5 meters in width, and 3 meters in height and consisted of 110 bespoke panels ranging in weight of 45 kg to 160 kg per panel. Geometrical constraints were determined by the bounding box of compressed sand mold blanks and tooling parameters of both CNC milling and concrete extrusion. Using this construction method, the project was able to be assembled and disassembled within the timeframe of the temporary outdoor exhibit, produce <1% of waste mortar material in fabrication, and utilize 60% less material to construct than cast-in-place construction. Using the sand mold to contain geometric edge conditions, the Print-Cast technique allows for precise aggregation tolerances. To increase the pavilions resistance to shear forces, interlocking nesting geometries are integrated into each edge condition of the panels with .785 radians of the undercut. Over extruding strategically during the printing process casts the undulating surface with accuracy. When nested together, the edge condition informs both the construction logic of the panel’s placement and orientation for the concrete panelized shell.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	caadria2019_388
id	caadria2019_388
authors	Beattie, Hamish, Brown, Daniel and Kindon, Sara
year	2019
title	Functional Fiction to Collective Action - Values-Based Participatory Urban Design Gaming
doi	https://doi.org/10.52842/conf.caadria.2019.1.737
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 737-746
summary	This paper discusses the methodology and results of the Maslow's Palace workshops project, which engages with current debates surrounding the democratisation of digital urban design technology and stakeholder decision making, through the implementation of a speculative oriented approach to serious gaming. The research explores how serious games might be used to help marginalised communities consider past, future and present community experiences, reconcile dissimilar assumptions, generate social capital building and design responses and prime participants for further long term design engagement processes. Empirical material for this research was gathered from a range of case study workshops prepared with three landfill-based communities and external partners throughout 2017. Results show the approach helped participants develop shared norms, values and understandings of sensitive topics and develop ideas for future action through "collective tinkering".
keywords	Participatory design; urban design; social capital; serious games; slum upgrading
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	lasg_proceedings_2019_fulltext
id	lasg_proceedings_2019_fulltext
authors	Beesley, Philip [editor]
year	2019
title	Living Architecture Systems Group Symposium 2019 Proceedings
source	Living Architecture Systems Group Symposium 2019 Proceedings [ISBN 978-1-988366-19-7 (paperback)] Riverside Architectural Press: Toronto, Canada 2019.
summary	Abstracts of presentations given by Living Architecture Systems Group (LASG) contributors at the LASG Symposium on March 1 – 3, 2019 in Toronto, Canada.
keywords	cybernetics, tavolva, visualization, space architecture, infrastucture, bioregional, 3D scanning, 360 degree, dark, 4DSOUND, theoretical physics, chaos, ceramics, biometrics, participatory art, live matter, agency, biomatter, artificial natures, material, 4D Printing, weaving, craft, botanical fur, bio-hybrids, monarch, wild, nonhuman, synthetic cognition, artificial intelligence, interactive, interface, robotics, manufacturing, tectonic culture
email
last changed	2019/07/29 14:00

_id	ecaadesigradi2019_110
id	ecaadesigradi2019_110
authors	Bernal, Marcelo, Marshall, Tyrone, Okhoya, Victor, Chen, Cheney and Haymaker, John
year	2019
title	Parametric Analysis versus Intuition - Assessment of the effectiveness of design expertise
doi	https://doi.org/10.52842/conf.ecaade.2019.2.103
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 103-110
summary	This paper explores through professional case studies how design solutions produced by expert teams compares to those developed through systematic parametric analysis. While the expert intuition of either single designer or teams helps to rapidly identify relevant aspects of the design problem and produce viable solutions, it has limitation to address multi-criteria design problems with conflicting objectives and searching for design alternatives. On the other hand, parametric analysis techniques in combination with data analysis methods helps to construct and analyze large design spaces of potential design solutions. For the purpose of this study, the specifications of geometric features and material properties of the building envelopes proposed by the expert design teams define the base line to measure the extent of the performance improvements of two typically conflicting objectives: Daylight quality and energy consumption. The results show consistently significant performance improvement after systematic optimization.
keywords	Performance Analysis; Parametric Analysis; Design Space; Design Expertise; Optimization
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	ecaadesigradi2019_619
id	ecaadesigradi2019_619
authors	Beyer, Bastian, Suárez, Daniel and Palz, Norbert
year	2019
title	Microbiologically Activated Knitted Composites - Reimagining a column for the 21st century
doi	https://doi.org/10.52842/conf.ecaade.2019.2.541
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 541-552
summary	A column is an archetypal constituent of architecture which historically underwent constant reiteration in accordance with the prevalent architectural style, material culture or technical and structural possibilities. The project reimagined this architectural element through harnessing the synergies of digital design, textile logic, and contemporary biotechnology. Textile materiality and aesthetic are deeply rooted in architectural history as a soft and ephemeral antipode to rigid building materials. An investigation in historic mechanical hand-knitting techniques allowed to extract their underlying structural and geometric logic to develop a structural optimisation pipeline with a graded yarn as a base material and a geometric optimization based on local distribution of knitting patterns. Bacterially driven biocalcification was applied to transform the soft textile structure into a rigid material. Hereby an active textile microbiome was established through colonizing of the yarn with the bacterium S. pasteurii which successively precipitated calcite on microscale within the textile substrate hence ultimately influencing the global structural behaviour of the column.
keywords	textile microbiome; material customization; knitting; yarn augmentation
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	acadia19_222
id	acadia19_222
authors	Birol, Eda Begum; Lu, Yao; Sekkin, Ege; Johnson, Colby; Moy, David; Islam, Yaseen; Sabin, Jenny
year	2019
title	POLYBRICK 2.0
doi	https://doi.org/10.52842/conf.acadia.2019.222
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 222-233
summary	Natural load bearing structures are characterized by aspects of specialized morphology, lightweight, adaptability, and a regenerative life cycle. PolyBrick 2.0 aims to learn from and apply these characteristics in the pursuit of revitalizing ceramic load bearing structures. For this, algorithmic design processes are employed, whose physical manifestations are realized through available clay/porcelain additive manufacturing technologies (AMTs). By integrating specialized expertise across disciplines of architecture, engineering, and material science, our team proposes an algorithmic toolset to generate PolyBrick geometries that can be applied to various architectural typologies. Additionally, comparative frameworks for digital and physical performance analyses are outlined. Responding to increasing urgencies of material efficiency and environmental sensibility, this project strives to provide for designers a toolset for environmentally responsive, case-specific design, characterized by the embedded control qualities derived from the bone and its adaptability to specific loading conditions. Various approaches to brick tessellation and assembly are proposed and architectural possibilities are presented. As an outcome of this research, PolyBrick 2.0 is effectively established as a Grasshopper plug-in, “PolyBrick” to be further explored by designers.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

For more results click below: