Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 617

Reformat results as: short short into frame detailed detailed into frame

_id	acadia19_332
id	acadia19_332
authors	Koerner, Andreas
year	2019
title	Thermochromic Articulations
doi	https://doi.org/10.52842/conf.acadia.2019.332
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 332- 337
summary	The ongoing research presented in this paper lies on the threshold between computational design and digital fabrication with a strong focus on emergent techniques for environmental design. The main hypothesis is, that with an increasing granularity of thermal comfort - observing a trend towards more heterogeneous indoor microclimates – new design challenges arise. Architectural fabrics will be required to communicate indoor climate conditions to the inhabitants, to maintain high levels of thermal comfort locally but specifically. This research investigates a novel generative design methodology, which links computational fluid dynamics simulations, robotic fabrication and material-inert performances. The resulting environmentally active panels respond to climatic conditions and by this communicate parameters of thermal comfort, such as temperature, airflow, and humidity, to the inhabitants. This paper presents a digital design workflow, a prototype for a thermochromic panel, and speculates on potential development. Communicating invisible parameters of thermal comfort to users is a crucial requirement when designing large continuous indoor volumes, when blurring the dichotomous duality of inside and outside and when designing highly porous architecture.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	ecaadesigradi2019_389
id	ecaadesigradi2019_389
authors	Mohite, Ashish, Kochneva, Mariia and Kotnik, Toni
year	2019
title	Speed of Deposition - Vehicle for structural and aesthetic expression in CAM
doi	https://doi.org/10.52842/conf.ecaade.2019.1.729
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 729-738
summary	This paper presents intermediate results of an experimental research directed towards development of a method that uses additive manufacturing technology as a generative agent in architectural design process. The primary technique is to variate speed of material deposition of a 3D printer in order to produce undetermined textural effects. These effects demonstrate local variation of material distribution, which is treated as a consequence of interaction between machining parameters and material properties. Current stage of inquiry is concerned with studying the impact of these textural artefacts on structure. Experiments demonstrate that manipulating distribution of matter locally results in more optimal structural performance, it solves printability issues of overhanging geometry without the need for additional supports and provides variation to the surface. The research suggests aesthetic and structural benefits of applying the developed method for mass-customized fabrication. It questions the linear thinking that is predominant in the field of 3D printing and provides an approach that articulates interaction between digital and material logics as it directs the formation of an object that is informed by both.
keywords	digital fabrication; digital craft; texture; ceramic 3D printing
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	ecaadesigradi2019_488
id	ecaadesigradi2019_488
authors	Naboni, Roberto and Kunic, Anja
year	2019
title	A computational framework for the design and robotic manufacturing of complex wood structures
doi	https://doi.org/10.52842/conf.ecaade.2019.3.189
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 189-196
summary	The emerging paradigm of Industry 4.0 is rapidly expanding in the AEC sector, where emergent technologies are offering new possibilities. The use of collaborative robots is enabling processes of advanced fabrication, where humans and robots coexist and collaborate towards the co-creation of new building processes. This paper focuses on setting a conceptual framework and a computational workflow for the design and assembly of a novel type of engineered wood structures. The aim is advancing timber construction through complex tectonic configurations, which are informed by logics of robotic assembly, topology and material optimization, and combinatorial design. Starting from the conceptualization of robotic layered manufacturing for timber structures, this work presents the development of a digital twin applied to the voxel-based design of complex timber structures.
keywords	Digital Materials; Robotic Assembly; Wood structures; Voxel-based design; Topology Optimization
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:59

_id	cf2019_051
id	cf2019_051
authors	Dickey , Rachel
year	2019
title	Soft Additive Fabrication Processes: Material Indeterminacy in 3D Printing
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 434
summary	This description of Soft Additive Fabrication Processes, documents ways in which chance and randomness might be treated as values rather than problems. The production of a series of robotically controlled extruder experiments explore integrating material volition with the rigid order of machine control. Specifically this paper outlines the development of tooling procedures that harness emergent conditions in the automation of qualitative material effects. A key question for the research asks, how might architects imagine a design and construction scenario, which is no longer confined to prescriptive material dimensions, but is instead driven by digitally calibrated stochastic material processes? What opportunities might arise from developing an automated system, which does not rely on direct translation, but instead operates and predicts outcomes within a range of potential results?
keywords	Additive manufacturing, robotics, 3D printing, indeterminacy, material volition
series	CAAD Futures
email
last changed	2019/07/29 14:18

_id	caadria2019_106
id	caadria2019_106
authors	Dritsas, Stylianos, Vijay, Yadunund, Teo, Ryan, Halim, Samuel, Sanandiya, Naresh and Fernandez, Javier G.
year	2019
title	Additive Manufacturing with Natural Composites - From material intelligence to informed digital fabrication
doi	https://doi.org/10.52842/conf.caadria.2019.2.263
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 263-272
summary	We present results on the development of a sustainable digital manufacturing technology, discuss the challenges associated with additive manufacturing with natural materials, how statistical modelling techniques enabled understanding the intricate relationship between material and fabrication and allowed to control material extrusion. We present a prototype created to assess the ability of the process to create large-scale artifacts. We believe steps towards advancing methods for environmentally-aware digital fabrication may pave the way in transforming the industry and society towards more sustainable production and consumption paradigms.
keywords	Digital Fabrication; Bioinspired Materials
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaadesigradi2019_510
id	ecaadesigradi2019_510
authors	Giannopoulou, Effima, Baquero, Pablo, Warang, Angad, Orciuoli, Affonso and T. Estévez, Alberto
year	2019
title	Stripe Segmentation for Branching Shell Structures - A Data Set Development as a Learning Process for Fabrication Efficiency and Structural Performance
doi	https://doi.org/10.52842/conf.ecaade.2019.3.063
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 63-70
summary	This article explains the evolution towards the subject of digital fabrication of thin shell structures, searching for the computational design techniques which allow to implement biological pattern mechanisms for efficient fabrication procedures. The method produces data sets in order to analyse and evaluate parallel alternatives of branching topologies, segmentation patterns, material usage, weight and deflection values as a user learning process. The importance here is given to the selection of the appropriate attributes, referring to which specific geometric characteristics of the parametric model are affecting each other and with what impact. The outcomes are utilized to train an Artificial Neural Network to predict new building information based on new combinations of desired parameters so that the user can decide and adjust the design based on the new information.
keywords	Digital Fabrication; Shell Structures; Segmentation; Machine Learning; Branching Topologies; Bio-inspired
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:51

_id	ecaadesigradi2019_506
id	ecaadesigradi2019_506
authors	Kontovourkis, Odysseas, Georgiou, Christos, Stroumpoulis, Andreas, Kounnis, Constantinos, Dionyses, Christos and Bagdati, Styliana
year	2019
title	Implementing Augmented Reality for the Holographic Assembly of a Modular Shading Device
doi	https://doi.org/10.52842/conf.ecaade.2019.3.149
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 149-158
summary	The development of innovative digital design and fabrication tools for material processing and manufacturing of complex and non-standard forms, apart from their advantages, have brought a number of challenges. These might be related to the effectiveness and sustainable potential of implementation associated with environmental, cost and time-related parameters, particularly in cases of large number of elements construction and complex assembly. Augmented Reality (AR) is an emerging technology with great potential for implementation in the construction industry, since it can enhance the real world with additional digital information, and thus, can assist towards manufacture and assemble of these particular systems. This study presents an AR methodology for assembling a modular shading device and discusses the advantages and disadvantages that this application can bring to the Architecture, Engineering and Construction (AEC) industry by taking into account precision and construction time issues based on the handling of the process by skilled and unskilled users/workers. Our aim is to investigate the potential implementation of AR in the assembly, and consequently, in the construction process as a whole. Also, this study aims at exploring existing constraints of the technology and suggests ways of improvement.
keywords	Augmented Reality; Holographic assembly; Modular system; Shading device
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:51

_id	ecaadesigradi2019_408
id	ecaadesigradi2019_408
authors	Lohse, Theresa and Werner, Liss C.
year	2019
title	Semi-flexible Additive Manufacturing Materials for Modularization Purposes - A modular assembly proposal for a foam edge-based spatial framework
doi	https://doi.org/10.52842/conf.ecaade.2019.1.463
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 463-470
summary	This paper introduces a series of design and fabrication tests directed towards the use of bendable 3D printing materials in order to simplify a foam bubble-based geometry as a frame structure for modular assembly. The aspiration to reference a spittlebug's bubble cocoon in nature for a light installation in the urban context was integrated into a computational workflow conditioning light-weight, material-, and cost savings along with assembly-simplicity. Firstly, before elaborating on the project motivation and background in foam structures and applications of 3D-printed thermoplastic polyurethane (TPU) material, this paper describes the physical nature of bubble foams in its relevant aspects. Subsequently this is implemented into the parametric design process for an optimized foam structure with Grasshopper clarifying the need for flexible materials to enhance modular feasibility. Following, the additive manufacturing iterations of the digitally designed node components with TPU are presented and evaluated. Finally, after the test assembly of both components is depicted, this paper assesses the divergence between natural foams and the case study structure with respect to self-organizing behavior.
keywords	digital fabrication; 3D Printing; TPU flexibility ; modularity; optimization
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:59

_id	ecaadesigradi2019_660
id	ecaadesigradi2019_660
authors	Martins, Pedro Filipe, Nunes, Sandra, Fonseca de Campos, Paulo and Sousa, José Pedro
year	2019
title	RETHINKING THE PHILIPS PAVILION THROUGH ROBOTIC HOT WIRE CUTTING. - An experimental prototype
doi	https://doi.org/10.52842/conf.ecaade.2019.3.235
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 235-244
summary	The Philips Pavilion by Le Corbusier and Jannis Xenaquis was a landmark project in thin shell concrete construction, only made possible by an experimental precasting strategy that deeply defined the architectural character of the hyperbolic paraboloid surfaces of the pavilion. Using this historic precedent this research presents a reinterpretation of the design of the Philips Pavilion, specifically tailored for Robotic Hot Wire Cutting technologies and a layered mold system, combining speed and material optimization towards more sustainable concrete construction processes. By documenting the realization of an experimental prototype at a 1:2 scale, this paper demonstrates the feasibility of the proposed strategy and its value in comparison with existing construction scale digital fabrication technologies for concrete.
keywords	Digital Fabrication; Concrete; Robotic Hot Wire Cutting; Philips Pavilion
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:59

_id	caadria2019_197
id	caadria2019_197
authors	Qian, Kaijie
year	2019
title	Building Simplification - A fabrication method based on Augmented Reality
doi	https://doi.org/10.52842/conf.caadria.2019.1.495
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 495-504
summary	Digital design techniques have improved significantly to enable designers to design with fewer limitations. However, the construction methods to fabricate these design proposals are still lagging behind due to a lack of skilled labour, material constraints, and the effects of gravity. Augmented reality has been developed in recent years, and this allows users to impose 3D virtual objects onto the real world. This essay will thus discuss whether augmented reality can guide unskilled labourers to complete complex work, thus overcoming one of the constraints on fabrication for complicated construction. This essay covers the results of three augmented reality tests using a Kinect device, a projector, and Microsoft HoloLens. It aims to show that augmented reality can indeed be used to guide unskilled labourers during construction to narrow the gap between complex design methods and basic construction techniques. The results indicate that augmented reality can guide such fabrication and thus improve construction methods.
keywords	Augmented Reality; Kinect; Microsoft HoloLens; Projector; Unskilled labour
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaadesigradi2019_519
id	ecaadesigradi2019_519
authors	Scheeren, Rodrigo, Herrera, Pablo C. and Sperling, David
year	2019
title	Evolving stages of digital fabrication in Latin America - Outlines of a research and extension project
doi	https://doi.org/10.52842/conf.ecaade.2019.2.797
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 797-806
summary	The introduction of digital fabrication technologies in Latin America faces diverse, heterogeneous and decentralized conditions. After several years, there was not a comprehensive perspective on the situation in the region. The goal of this paper is to present a project called "Homo Faber: Digital Fabrication in Latin America" and some of its results. The project comprehends the creation of a database that led to researches and exhibitions about digital fabrication in design, architecture and building construction in Latin America. The questions that guide the investigation try to understand which factors contribute and limit the potential of automation in material processes towards 4.0 industry.
keywords	Computer Aided Architectural Design; Digital Fabrication; Latin America; Mapping
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:57

_id	ijac201917201
id	ijac201917201
authors	Trilsbeck, Matthew; Nicole Gardner, Alessandra Fabbri, Matthias Hank Haeusler, Yannis Zavoleas and Mitchell Page
year	2019
title	Meeting in the middle: Hybrid clay three-dimensional fabrication processes for bio-reef structures
source	International Journal of Architectural Computing vol. 17 - no. 2, 148-165
summary	Despite the relative accessibility of clay, its low cost and reputation as a robust and sustainable building material, clay three-dimensional printing remains an under-utilized digital fabrication technique in the production of architectural artefacts. Given this, numerous research projects have sought to extend the viability of clay three-dimensional digital fabrication by streamlining and automating workflows through computational methods and robotic technologies in ways that afford agency to the digital and machinic processes over human bodily skill. Three-dimensional printed clay has also gained prominence as a resilient material well suited to the design and fabrication of artificial reef and habitat- enhancing seawall structures for coastal marine environments depleted and disrupted by human activity, climate change and pollution. Still, these projects face similar challenges when three-dimensional printing complex forms from the highly plastic and somewhat unpredictable feed material of clay. In response, this article outlines a research project that seeks to improve the translation of complex geometries into physical clay artefacts through additive three- dimensional printing processes by drawing on the notion of digital craft and giving focus to human–machine interaction as a collaborative practice. Through the case study of the 1:1 scale fabrication of a computationally generated bio-reef structure using clay as a feed material and a readily available Delta Potterbot XLS-2 ceramic printer, the research project documents how, by exploiting the human ability to intuitively handle clay and adapt, and the machine’s ability to work efficiently and with precision, humans and machines can fabricate together . With the urgent need to develop more sustainable building practices and materials, this research contributes valuable knowledge of hybrid fabrication processes towards extending the accessibility and viability of clay three-dimensional printing as a resilient material and fabrication system.
keywords	Clay three-dimensional printing, digital fabrication, hybrid fabrication, digital craft, human–machine interaction
series	journal
email
last changed	2019/08/07 14:04

_id	ecaadesigradi2019_298
id	ecaadesigradi2019_298
authors	Zboinska, Malgorzata A.
year	2019
title	Artistic computational design featuring imprecision - A method supporting digital and physical explorations of esthetic features in robotic single-point incremental forming of polymer sheets
doi	https://doi.org/10.52842/conf.ecaade.2019.1.719
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 719-728
summary	Design strategies that employ digital and material imprecision to achieve esthetic innovation exhibit high potential to transform the current precision-oriented practices of computation and digital fabrication in architecture. However, such strategies are still in their infancy. We present a design method facilitating intentionally-imprecise esthetic explorations within the framework of digital design and robotic single-point incremental forming. Our method gives access to the esthetic fine-tuning of molds from which architectural objects are cast. Semi-precise computational operations of extending, limiting, deepening and shallowing the geometrical deformations of the mold through robot toolpath fine-tuning are enabled by a digital toolkit featuring parametric modeling, surface curvature analyses, photogrammetry, digital photography and bitmap image retouching and painting. Our method demonstrates the shift of focus from geometric accuracy and control of material behaviors towards intentionally-imprecise digital explorations that yield novel esthetic features of architectural designs. By demonstrating the results of applying our method in the context of an exploration-driven design process, we argue that imprecision can be equally valid to accuracy, opening a vast, excitingly unknown territory for material-mediated esthetic explorations within digital fabrication. Such explorations can interestingly alter the esthetic canons and computational design methods of digital architecture in the nearest future.
keywords	Artistic architectural design; artistic digital crafting; creative robotics; material agency; fabrication inaccuracies; robotic single-point incremental forming of polymers
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:57

_id	caadria2019_660
id	caadria2019_660
authors	Aghaei Meibodi, Mania, Giesecke, Rena and Dillenburger, Benjamin
year	2019
title	3D Printing Sand Molds for Casting Bespoke Metal Connections - Digital Metal: Additive Manufacturing for Cast Metal Joints in Architecture
doi	https://doi.org/10.52842/conf.caadria.2019.1.133
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 133-142
summary	Metal joints play a relevant role in space frame constructions, being responsible for large amount of the overall material and fabrication cost. Space frames which are constructed with standardized metal joints are constrained to repetitive structures and topologies. For customized space frames, the fabrication of individual metal joints still remains a challenge. Traditional fabrication methods such as sand casting are labour intensive, while direct 3D metal printing is too expensive and slow for the large volumes needed in architecture.This research investigates the use of Binder Jetting technology to 3D print sand molds for casting bespoke metal joints in architecture. Using this approach, a large number of custom metal joints can be fabricated economically in short time. By automating the generation of the joint geometry and the corresponding mold system, an efficient digital process chain from design to fabrication is established. Several design studies for cast metal joints are presented. The approach is successfully tested on the example of a full scale space frame structure incorporating almost two hundred custom aluminum joints.
keywords	3D printing; binder jetting; sand casting; metal joints; metal casting; space frame; digital fabrication; computational design; lightweight; customization
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac201917105
id	ijac201917105
authors	Agkathidis, Asterios; Yorgos Berdos and André Brown
year	2019
title	Active membranes: 3D printing of elastic fibre patterns on pre-stretched textiles
source	International Journal of Architectural Computing vol. 17 - no. 1, 74-87
summary	There has been a steady growth, over several decades, in the deployment of fabrics in architectural applications; both in terms of quantity and variety of application. More recently, three-dimensional printing and additive manufacturing have added to the palette of technologies that designers in architecture and related disciplines can call upon. Here, we report on research that brings those two technologies together – the development of active membrane elements and structures. We show how these active membranes have been achieved by laminating three-dimensional printed elasto-plastic fibres onto pre-stretched textile membranes. We report on a set of experimentations involving one-, two- and multi-directional geometric arrangements that take TPU 95 and polypropylene filaments and apply them to Lycra textile sheets, to form active composite panels. The process involves a parameterised design, actualised through a fabrication process including stress-line simulation, fibre pattern three-dimensional printing and the lamination of embossed patterns onto a pre-stretched membrane; followed by the release of tension afterwards in order to allow controlled, self-generation of the final geometry. Our findings document the investigation into mapping between the initial two-dimensional geometries and their resulting three-dimensional doubly curved forms. We also reflect on the products of the resulting, partly serendipitous, design process.
keywords	Digital fabrication, three-dimensional printing, parametric design, material computation, fabrics
series	journal
email
last changed	2019/08/07 14:04

_id	acadia19_596
id	acadia19_596
authors	Anton, Ana; Yoo, Angela; Bedarf, Patrick; Reiter, Lex; Wangler, Timothy; Dillenburger, Benjamin
year	2019
title	Vertical Modulations
doi	https://doi.org/10.52842/conf.acadia.2019.596
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 596-605
summary	The context of digital fabrication allows architects to reinvestigate material, process and the design decisions they entail to explore novel expression in architecture. This demands a new approach to design thinking, as well as the relevant tools to couple the form of artefacts with the process in which they are made. This paper presents a customised computational design tool developed for exploring the novel design space of Concrete Extrusion 3D Printing (CE3DP), enabling a reinterpretation of the concrete column building typology. This tool allows the designer to access generative engines such as trigonometric functions and mesh subdivision through an intuitive graphical user interface. Balancing process efficiency as understood by our industry with a strong design focus, we aim to articulate the unique architectural qualities inherent to CE3DP, energising much needed innovation in concrete technology.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2019_447
id	caadria2019_447
authors	Cheng, Chi-Li and Hou, June-Hao
year	2019
title	Robotic Glass Crafting by Dip Forming
doi	https://doi.org/10.52842/conf.caadria.2019.1.193
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 193-202
summary	This research is to develop a robotic glass crafting dip-forming process by dip forming. Instead of employing molds, we utilize repetitive dip coating and gravity to shape the glass. In addition, its morphogenesis process is similar to the certain growth mechanisms in nature, such as geotropism and branching. During the forming process, melted glass is accumulated layer by layer gradually until the target geometry is completed. The process takes advantage of the precision of the industrial robotic arm and the viscosity property of the material. This process requires the custom-made tool to operate in high temperature and controlling the timing of heating and annealing to eliminate Z artifacts caused by layered deposition, achieving the crystal-clear effect of the glass craft without the post cure process after printing. In addition, the robotic arm provides a higher degree of freedom for forming. This research demonstrates glassworks in the organic form including variations in thickness and branching to test the proposed method.
keywords	robotic arm; glass craft; Digital Fabrication; additive manufacturing; dipping forming
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	acadia19_156
id	acadia19_156
authors	Dahy, Hanaa; Baszyñski, Piotr; Petrš, Jan
year	2019
title	Experimental Biocomposite Pavilion
doi	https://doi.org/10.52842/conf.acadia.2019.156
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 156-165
summary	Excessive use of aggregate materials and metals in construction should be balanced by increasing use of construction materials from annually renewable resources based on natural lignocellulosic fibers. Parametric design tools gave here a possibility of using an alternative newly developed biocomposite material, for realization of complex geometries. Contemporary digital fabrication tools have enabled precise manufacturing possibilities and sophisticated geometry-making to take place that helped in obtaining high structural behavior of the overall global geometry of the discussed project. This paper presents a process of realizing an experimental structure made from Natural Fiber-Reinforced Polymers (NFRP)- also referred to as biocomposites, which were synthesized from lignocellulosic flexible core reinforced by 3D-veneer layers in a closed-moulding vacuum-assisted process. The biocomposite sandwich panels parameters were developed and defined before the final properties were imbedded in the parametric model. This paper showcases the multi-disciplinarity work between architects, structural engineers and material developers. It allowed the architects to work on the material development themselves and enabled to apply a new created design philosophy by the first author, namely applying ‘Materials as a Design-Tool’. The erected biocomposite segmented shell construction allowed a 1:1 validation for the whole design process, material development and the digital fabrication processes applied. The whole development has been reached after merging an ongoing industrial research project results with academic education at the school of architecture in Stuttgart-Germany.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	cf2019_053
id	cf2019_053
authors	Diarte, Julio ; Elena Vazquez and Marcus Shaffer
year	2019
title	Tooling Cardboard for Smart Reuse: A Digital and Analog Workflow for Upcycling Waste Corrugated Cardboard as a Building Material
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 436
summary	This paper is a description of a hybridized digital and analog workflow for reusing waste corrugated cardboard as a building material. The work explores a combination of digital design and analog fabrication tools to create a workflow that would help designers/builders to negotiate with the material variability of waste cardboard. The workflow discussed here was implemented for designing and fabricating a prototypical modular floor panel using different sheets of waste cardboard combined with repurposed wood. The implementation shows that combining digital and analog tools can create a novel approach to material reuse, and facilitate a design/fabrication culture of smart reuse that supports informal building and making at recycling collection centers in developing countries for housing alternatives
keywords	Smart Reuse, Waste Cardboard Architecture, Digital Analog Workflow, Parametric Design
series	CAAD Futures
email
last changed	2019/07/29 14:18

For more results click below: