Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 603

Reformat results as: short short into frame detailed detailed into frame

_id	acadia19_470
id	acadia19_470
authors	Meyboom, AnnaLisa; Correa, David; Krieg, Oliver David
year	2019
title	Stressed Skin Wood Surface Structure
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 470-477
doi	https://doi.org/10.52842/conf.acadia.2019.470
summary	Innovation in parametric design and robotic fabrication is in reciprocal relationship with the investigation of new structural types that facilitated by this technology. The stressed skin structure has historically been used to create lightweight curved structures, mainly in engineering applications such as naval vessels, aircraft, and space shuttles. Stressed skin structures were first referred to by Fairbairn in 1849. In England, the first use of the structure was in the Mosquito night bomber of World War II. In the United States, stressed skin structures were used at the same time, when the Wright Patterson Air Force Base designed and fabricated the Vultee BT-15 fuselage using fiberglass-reinforced polyester as the face material and both glass-fabric honeycomb and balsa wood core. With the renewed interest in wood as a structural building material, due to its sustainable characteristics, new potentials for the use of stressed skin structures made from wood on building scales are emerging. The authors present a material informed system that is characterized by its adaptability to freeform curvature on exterior surfaces. A stressed skin system can employ thinner materials that can be bent in their elastic bending range and then fixed into place, leading to the ability to be architecturally malleable, structurally highly efficient, as well as easily buildable. The interstitial space can also be used for services. Advanced digital fabrication and robotic manufacturing methods further enhance this capability by enabling precisely fabricated tolerances and embedded assembly instructions; these are essential to fabricate complex, multi-component forms. Through a prototypical installation, the authors demonstrate and discuss the technology of the stressed skin structure in wood considering current digital design and fabrication technologies.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	acadia20_176p
id	acadia20_176p
authors	Lok, Leslie; Zivkovic, Sasa
year	2020
title	Ashen Cabin
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 176-181
summary	Ashen Cabin, designed by HANNAH, is a small building 3D-printed from concrete and clothed in a robotically fabricated envelope made of irregular ash wood logs. From the ground up, digital design and fabrication technologies are intrinsic to the making of this architectural prototype, facilitating fundamentally new material methods, tectonic articulations, forms of construction, and architectural design languages. Ashen Cabin challenges preconceived notions about material standards in wood. The cabin utilizes wood infested by the Emerald Ash Borer (EAB) for its envelope, which, unfortunately, is widely considered as ‘waste’. At present, the invasive EAB threatens to eradicate most of the 8.7 billion ash trees in North America (USDA, 2019). Due to their challenging geometries, most infested ash trees cannot be processed by regular sawmills and are therefore regarded as unsuitable for construction. Infested and dying ash trees form an enormous and untapped material resource for sustainable wood construction. By implementing high precision 3D scanning and robotic fabrication, the project upcycles Emerald-Ash-Borer-infested ‘waste wood’ into an abundantly available, affordable, and morbidly sustainable building material for the Anthropocene. Using a KUKA KR200/2 with a custom 5hp band saw end effector at the Cornell Robotic Construction Laboratory (RCL), the research team can saw irregular tree logs into naturally curved boards of various and varying thicknesses. The boards are arrayed into interlocking SIP façade panels, and by adjusting the thickness of the bandsaw cut, the robotically carved timber boards can be assembled as complex single curvature surfaces or double-curvature surfaces. The undulating wooden surfaces accentuate the building’s program and yet remain reminiscent of the natural log geometry which they are derived from. The curvature of the wood is strategically deployed to highlight moments of architectural importance such as windows, entrances, roofs, canopies, or provide additional programmatic opportunities such as integrated shelving, desk space, or storage.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	ecaadesigradi2019_407
id	ecaadesigradi2019_407
authors	Capone, Mara, Lanzara, Emanuela, Marsillo, Laura and Nome Silva, Carlos Alejandro
year	2019
title	Responsive complex surfaces manufacturing using origami
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 715-724
doi	https://doi.org/10.52842/conf.ecaade.2019.2.715
summary	Contemporary architecture is considered a dynamic system, capable of adapting to different needs, from environmental to functional ones. The term 'Adaptable Architecture' describes an architecture from which specific components can be changed in relation to external stimuli. This change could be executed by the building system itself, transformed manually or it could be any other ability to be transformed by external forces (Leliveld et al.2017). Adaptability concept is therefore linked to motion and to recent advances in kinetic architecture. In our research we are studying the rules that we can use to design a kinetic architecture using origami. Parametric design allows us to digitally simulate the movement of origami structures, we are testing algorithmic modeling to generate doubly curvature surfaces starting from a designed surface and not from the process. Our main goal is to study the relationship between geometry, motion and shape. We are interested, in particular, in complex surface manufacture using origami technique to design a kinetic and reactive ceiling.
keywords	Origami; complex surface manufacture; responsive architecture; Applied Geometry
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	caadria2019_659
id	caadria2019_659
authors	Wang, Xiang, Guo, Zhe, Zhang, Xiao, Jin, Jinxi and Yuan, Philip F.
year	2019
title	Design, Analysis and Robotic Fabrication of a Bending-Active Shell Structure with Thin Sheets Based on Curved-Crease-Folding Technique
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 63-72
doi	https://doi.org/10.52842/conf.caadria.2019.1.063
summary	This paper shows a design and building application of an innovative structure concept which is developed by the authors. The long-span shell structure (8m10m2.5m) built with 1.5mm thin aluminum sheets demonstrates the possibility to apply bending-active structures with flexible thin sheet material in shell structures to enhance the global and local stiffness. The structure is mainly originated from the curved-crease-folding technique which enhances the structural stiffness by introducing curvature to the surfaces. The Y-shape structural elements define the basic geometrical rules and find its global double-curved geometry via the folding of the three lateral ribs. The full-scale prototype and its design and fabrication techniques show a design framework of the structure from its form-finding, surface optimization, robotic simulated fabrication to the final full-scale assembly. As a pioneer pavilion in a research workshop, students' design with diverse forms also show the widely possible application of this structural concept.
keywords	shell structure; thin aluminum sheets; bending-active; robotic creased-folding
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaadesigradi2019_205
id	ecaadesigradi2019_205
authors	Campos, Filipe Medéia de, Leite, Raquel Magalh?es, Prudencio, Christina Figueiredo, Dias, Maíra Sebasti?o and Celani, Gabriela
year	2019
title	Prototyping a Facade Component - Mixed technologies applied to fabrication
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 179-186
doi	https://doi.org/10.52842/conf.ecaade.2019.1.179
summary	During the last decade, mass customization in developing countries has been rising. The combination of conventional methods and materials with computer numeric control technologies offers a possibility of merging established craftsmanship to the production of personalized components with mass production efficiency. This article aims to present the development of a facade component prototype as a means to prospect possibilities for mixing parametric design and digital fabrication to casting, especially in developing countries like Brazil. This is an applied research with an exploratory and constructive approach, which was a result of a graduate class structured on a research by design basis. The conceptual development and prototyping of the artifact followed iterative cycles, considering its performance, fabrication methods and feasibility. The selection of materials that are commonly used in Brazilian architecture, like concrete, facilitates the component adoption as as a facade solution. The main conclusion emphasizes the need of involvement between academia and industry for the development of innovative products and processes, and highlights different levels of mass customization to include a range of manufacturing agents, from major industries to local craftspeople.
keywords	digital fabrication; mass customization; prototyping; facade component
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_592
id	ecaadesigradi2019_592
authors	Carvalho, Jo?o, Figueiredo, Bruno and Cruz, Paulo
year	2019
title	Free-form Ceramic Vault System - Taking ceramic additive manufacturing to real scale
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 485-492
doi	https://doi.org/10.52842/conf.ecaade.2019.1.485
summary	The use of Additive Manufacturing (AM) for the production of architectural components has more and more examples attesting the possibilities and the advantages of its application. At the same time we seen a fast grow of the usage of ceramic materials to produce fully customised architectural components using Layer Deposition Modelling (LDM) [1] techniques. However, the use of this material, as paste, leads to a series of constraints relative to its behaviour when in the viscous state, but also in the drying and firing stages. Thus, when ceramic dries, the retraction effects may be a barrier to the regular use of this material to build future architectural systems. In this sense, it is important to study the material behaviour and know how to control and use it as a primary construction material. To do that we present the challenges and outcomes of project Hexashade, a ceramic vault shading system prototype whose geometry and internal structure is defined according to the solar incidence. This paper explain how we expect to build a real scale self-supporting prototype.
keywords	Ceramic 3D printing; Additive Manufacturing; Vaulting Systems; Parametric Design; Performative Design
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	ecaadesigradi2019_249
id	ecaadesigradi2019_249
authors	Chiarella, Mauro, Gronda, Luciana and Veizaga, Martín
year	2019
title	RILAB - architectural envelopes - From spatial representation (generative algorithm) to geometric physical optimization (scientific modeling)
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 17-24
doi	https://doi.org/10.52842/conf.ecaade.2019.3.017
summary	Augmented graphical thinking operates by integrating algorithmic, heuristic, and manufacturing processes. The Representation and Ideation Laboratory (RILAB-2018) exercise begins with the application of a parametric definition developed by the team of teachers, allowing for the construction of structural systems by the means of the combination of segmental shells and bending-active. The main objetive is the construction of a scientific model of simulation for bending-active laminar structures has brought into reality trustworthy previews for architectural envelopes through the interaction of parametrized relational variables. This way we put designers in a strategic role for the building of the pre-analysis models, allowing more preciseness at the time of picking and defining materials, shapes, spaces and technologies and thus minimizing the decisions based solely in the definition of structural typological categories, local tradition or direct experience. The results verify that the strategic integration of models of geometric physical optimization and spatial representation greatly expand the capabilities in the construction of the complex system that operates in the act of projecting architecture.
keywords	architectural envelopes; augmented graphic thinking; geometric optimization; bending-active
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	ecaadesigradi2019_404
id	ecaadesigradi2019_404
authors	Collins, Jeffrey and Gentry, Russell
year	2019
title	Coordinating Atypical Architectural Precast Concrete Façades - Two categories
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 261-268
doi	https://doi.org/10.52842/conf.ecaade.2019.2.261
summary	This research focuses on issues of coordination between designers and fabricators during early design. The aim of this work is to improve representations, enable more informed conversations, and streamline exchanges of digital models. In order to show the potential of the work, research is focused on architectural precast concrete facades. Previous work established methods for linking "global" and "local" parametric models of architectural intent and corresponding components, describing processes of mapping from individual custom panels to diagrammatic façade surfaces and vice-versa. Such mapping may be considered "direct," wherein individual panel boundaries - defined by surface patterning - allow simple mapping of data from global to local or from local to global descriptions. However, there are some buildings with architectural precast concrete façades which do not permit direct relationships between global and local descriptions. These atypical facades require "indirect" maps containing additional layers of information in order to coordinate global and local descriptions. This paper describes two categories of these indirect scenarios: "panelization" and "patterns across panels."
keywords	BIM; Parametric modelling; Architectural precast concrete; Building facades
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_369
id	ecaadesigradi2019_369
authors	Contreras, Camilo Hernán
year	2019
title	Surfaces Plot - A data visualization system to support design space exploration
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 145-152
doi	https://doi.org/10.52842/conf.ecaade.2019.2.145
summary	The notion of design spaces (DS) can be understood as the potential of a parametric model, it is basically the number of possible combinations for its input parameters. When combining tools that produce these alternatives automatically with different simulation softwares, the concept of parametric analysis (PA) emerges. This implies a simultaneous evaluation of the alternatives as they are constructed by the parametric model, producing large amounts of information. This article describes a sectional approach to the management of this information and a visualization technique to represent it looking for correlations between the input parameters and their performance. Correlations that are fundamental to making decisions with confidence when design problems challenge traditional methods of decision-making based on heuristics and design expertise.
keywords	Design Space ; Performance-Based Design; Parametric Analysis; Generative Design; Data Visualization
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	acadia19_156
id	acadia19_156
authors	Dahy, Hanaa; Baszyñski, Piotr; Petrš, Jan
year	2019
title	Experimental Biocomposite Pavilion
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 156-165
doi	https://doi.org/10.52842/conf.acadia.2019.156
summary	Excessive use of aggregate materials and metals in construction should be balanced by increasing use of construction materials from annually renewable resources based on natural lignocellulosic fibers. Parametric design tools gave here a possibility of using an alternative newly developed biocomposite material, for realization of complex geometries. Contemporary digital fabrication tools have enabled precise manufacturing possibilities and sophisticated geometry-making to take place that helped in obtaining high structural behavior of the overall global geometry of the discussed project. This paper presents a process of realizing an experimental structure made from Natural Fiber-Reinforced Polymers (NFRP)- also referred to as biocomposites, which were synthesized from lignocellulosic flexible core reinforced by 3D-veneer layers in a closed-moulding vacuum-assisted process. The biocomposite sandwich panels parameters were developed and defined before the final properties were imbedded in the parametric model. This paper showcases the multi-disciplinarity work between architects, structural engineers and material developers. It allowed the architects to work on the material development themselves and enabled to apply a new created design philosophy by the first author, namely applying ‘Materials as a Design-Tool’. The erected biocomposite segmented shell construction allowed a 1:1 validation for the whole design process, material development and the digital fabrication processes applied. The whole development has been reached after merging an ongoing industrial research project results with academic education at the school of architecture in Stuttgart-Germany.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_197
id	ecaadesigradi2019_197
authors	Diarte, Julio, Vazquez, Elena and Shaffer, Marcus
year	2019
title	Tooling Cardboard for Smart Reuse - Testing a Parametric Tool for Adapting Waste Corrugated Cardboard to Fabricate Acoustic Panels and Concrete Formwork.
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 769-778
doi	https://doi.org/10.52842/conf.ecaade.2019.2.769
summary	The study presented in this paper is part of ongoing research that is exploring how digital design tools and technologies can support waste cardboard reuse for manufacturing architectural elements in a context of scarcity. For this study, we explore the use of a parametric design tool to design and fabricate three different architectural components using waste cardboard sheets: acoustic panels and two types of formwork for concrete. This design tool maximizes the smart reuse of a waste material and aids in the fabrication process by outputting instructions for cutting, scoring, and folding. This paper also demonstrates how parametric design tools can help reuse non-standard (dimensions variable) waste materials, mediating between measurable material conditions and desired material targets for designs.
keywords	Cardboard Architecture; Reusing Waste Cardboard; Material Reuse Processes; Parametric Design Tools
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	caadria2019_658
id	caadria2019_658
authors	Lange, Christian and Holohan, Donn
year	2019
title	CeramicINformation Pavilion - Rethinking structural brick specials through an indexical 3D printing method
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 103-112
doi	https://doi.org/10.52842/conf.caadria.2019.1.103
summary	Complex brick construction is defined by its relationship to labor; it requires skilled workers in planning, manufacturing and assembly. In the modern era, this has been perceived as a significant drawback, and as such has resulted in brick construction being partially superseded by more rapid methods of fabrication, despite its inherent robustness and longevity. This paper describes the second stage of an ongoing research project which attempts to revitalize the material system of the brick special through the development of an intelligent 3d printing method that works in conjunction with a layman assembly procedure for a new class of self-supporting nonstandard brick structures. In this project, an indexed and geometrically informed jointing system, together with a parametric and digital workflow, enables rapid assembly on site without a requirement for complex site setup or skilled labor.
keywords	Digital Fabrication; 3D clay printing; Brick Specials; Computational Design
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaadesigradi2019_408
id	ecaadesigradi2019_408
authors	Lohse, Theresa and Werner, Liss C.
year	2019
title	Semi-flexible Additive Manufacturing Materials for Modularization Purposes - A modular assembly proposal for a foam edge-based spatial framework
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 463-470
doi	https://doi.org/10.52842/conf.ecaade.2019.1.463
summary	This paper introduces a series of design and fabrication tests directed towards the use of bendable 3D printing materials in order to simplify a foam bubble-based geometry as a frame structure for modular assembly. The aspiration to reference a spittlebug's bubble cocoon in nature for a light installation in the urban context was integrated into a computational workflow conditioning light-weight, material-, and cost savings along with assembly-simplicity. Firstly, before elaborating on the project motivation and background in foam structures and applications of 3D-printed thermoplastic polyurethane (TPU) material, this paper describes the physical nature of bubble foams in its relevant aspects. Subsequently this is implemented into the parametric design process for an optimized foam structure with Grasshopper clarifying the need for flexible materials to enhance modular feasibility. Following, the additive manufacturing iterations of the digitally designed node components with TPU are presented and evaluated. Finally, after the test assembly of both components is depicted, this paper assesses the divergence between natural foams and the case study structure with respect to self-organizing behavior.
keywords	digital fabrication; 3D Printing; TPU flexibility ; modularity; optimization
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:59

_id	acadia19_266
id	acadia19_266
authors	MacDonald, Katie; Schumann, Kyle; Hauptman, Jonas
year	2019
title	Digital Fabrication of Standardless Materials
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 266-275
doi	https://doi.org/10.52842/conf.acadia.2019.266
summary	Digital fabrication techniques have long been aimed at creating unique geometries and forms from standardized, often industrially produced or processed material. These materials have predictable, uniform geometries which allow the fabrication process to be aimed at producing variation through Computer Numerically Controlled (CNC) milling of topological surfaces from volumetric stock or profiles from sheet material. More recently, digital fabrication techniques have been expanded and categorized to address the inherent variation in a found material. Digital materiallurgy defines an approach where standard techniques are applied to non-standard materials; in form-searching, non-standard materials such as unmilled timber members or chunks of concrete waste are analyzed for optimization within a digital fabrication process. Processes of photogrammetry, 3D scanning, and parametric analysis have been used to advance these methods and minimize part reduction and material waste. In this paper, we explore how such methods may be applied to materials without traditional standards—allowing for materials that are inherently variable in geometry to be made usable and for such eccentricities to be leveraged within a design. This paper uses bamboo as a case study for standardless material, and proposes an integrated digital fabrication method for using such material: (1) material stock analysis using sensing technology, (2) parametric best-fit part selection that optimizes a given piece of material within an assembly, and (3) parametric feedback between available material and the design of an assembly which allows for the assembly to adjust its geometry to a set of available parts.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	sigradi2023_416
id	sigradi2023_416
authors	Machado Fagundes, Cristian Vinicius, Miotto Bruscato, Léia, Paiva Ponzio, Angelica and Chornobai, Sara Regiane
year	2023
title	Parametric environment for internalization and classification of models generated by the Shap-E tool
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1689–1698
summary	Computing has been increasingly employed in design environments, primarily to perform calculations and logical decisions faster than humans could, enabling tasks that would be impossible or too time-consuming to execute manually. Various studies highlight the use of digital tools and technologies in diverse methods, such as parametric modeling and evolutionary algorithms, for exploring and optimizing alternatives in architecture, design, and engineering (Martino, 2015; Fagundes, 2019). Currently, there is a growing emergence of intelligent models that increasingly integrate computers into the design process. Demonstrating great potential for initial ideation, artificial intelligence (AI) models like Shap-E (Nichol et al., 2023) by OpenAI stand out. Although this model falls short of state-of-the-art sample quality, it is among the most efficient orders of magnitude for generating three-dimensional models through AI interfaces, offering practical balance for certain use cases. Thus, aiming to explore this gap, the presented study proposes an innovative design agency framework by employing Shap-E connected with parametric modeling in the design process. The generation tool has shown promising results; through generations of synthetic views conditioned by text captions, its final output is a mesh. However, due to the lack of topological information in models generated by Shap-E, we propose to fill this gap by transferring data to a parametric three-dimensional surface modeling environment. Consequently, this interaction's use aims to enable the transformation of the mesh into quantifiable surfaces, subject to collection and optimization of dimensional data of objects. Moreover, this work seeks to enable the creation of artificial databases through formal categorization of parameterized outputs using the K-means algorithm. For this purpose, the study methodologically orients itself in a four-step exploratory experimental process: (1) creation of models generated by Shap-E in a pressing manner; (2) use of parametric modeling to internalize models into the Grasshopper environment; (3) generation of optimized alternatives using the evolutionary algorithm (Biomorpher); (4) and classification of models using the K-means algorithm. Thus, the presented study proposes, through an environment of internalization and classification of models generated by the Shap-E tool, to contribute to the construction of a new design agency methodology in the decision-making process of design. So far, this research has resulted in the generation and classification of a diverse set of three-dimensional shapes. These shapes are grouped for potential applications in machine learning, in addition to providing insights for the refinement and detailed exploration of forms.
keywords	Shap-E, Parametric Design, Evolutionary Algorithm, Synthetic Database, Artificial Intelligence
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	ecaadesigradi2019_455
id	ecaadesigradi2019_455
authors	Moreira, Jo?o, Figueiredo, Bruno and Cruz, Paulo
year	2019
title	Ceramic Additive Manufacturing in Architecture - Computational Methodology for Defining a Column System
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 471-476
doi	https://doi.org/10.52842/conf.ecaade.2019.1.471
summary	The present paper describes a research that explores the design and production of customised architectural ceramic components defined through parametric relations of biomorphic inspiration and to be built through additive manufacturing. In this sense, is presented a case study that develops a system of both architectural and structural components - a column system. The definition process of the system is mediated by computational design, implementing not only structural analysis and optimization strategies, but also mimetic formal characteristics of nature to an initial grid, creating a model that adapts its formal attributes, depending on its assumptions and the material constraints. This process resulted in the definition of a set of solutions that better answer to a specific design problem.
keywords	Additive Manufacturing; Ceramic 3D; Computational Design; Structural Optimization; Biomorphism
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	ecaadesigradi2019_193
id	ecaadesigradi2019_193
authors	Scherer, Annie Locke
year	2019
title	Concrete Form[ing]work:Designing and Simulating Parametrically-Patterned Fabric Formwork for Cast Concrete
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 759-768
doi	https://doi.org/10.52842/conf.ecaade.2019.2.759
summary	Concrete is one of the most widely used construction materials globally, yet its industrial fabrication techniques continue to default to planar formwork and uniform cross sections for the sake of simplicity and predictability. /Concrete Form[ing]work/ evaluates state-of-the-art fabric formwork research and explores the industry's reticence to integrate these novel design approaches. This research has identified two challenges that have significantly hindered the adoption of fabric formwork in architectural design: complex tailoring of parametrically designed forms and the lack of accurate simulation tools for flexible formwork. /Concrete Form[ing]work/ develops methods to address both of these issues, providing an alternative approach to more simply tailor fabric forms and accurately simulate these patterns' response to casting. In doing so, this research has the potential to fundamentally change and streamline how the field of flexible formwork is approached and integrated within architectural design. This paper will present the process of parametrically tailoring non-developable surfaces from single sheets and document the advancement of these simulation tools.
keywords	flexible formwork; concrete; simulation; parametric patterning; smocking
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:57

_id	caadria2019_103
id	caadria2019_103
authors	Silva, Lilian, Silva, Neander and Lacroix, Igor
year	2019
title	Integrating Parametric Modeling with BIM through Generative Programming for the production of NURBS Surfaces and Structures
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 635-644
doi	https://doi.org/10.52842/conf.caadria.2019.1.635
summary	A workflow for integration of parametric modeling with BIM, using generative-programming, is described and tested in this research. The objective is to take advantage of these two distinctive design paradigms. This paper describes a design experiment that required a NURBS roof generated by sweeping profiles along a curved path. We assumed the use of multiple applications, using various file formats, are facts and are unlikely to disappear. Given that interoperability issues will certainly arise, we propose and test a design workflow using parametric modeling, generative programming, and building information modeling. Our major contribution was defining a workflow for designing NURBS surfaces and corresponding supporting structures enhancing interoperability among different applications through generative-programming.
keywords	NURBS; Parametric; Programming; Interoperability; BIM
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2019_011
id	cf2019_011
authors	Silva, Lilian; Neander Silva and Igor Lacroix
year	2019
title	Interoperability Workflow Method for Designing NURBS Surfaces and Structures with Generative Programming
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 88-100
summary	The workflow for integration of parametric modeling with BIM is using generative-programming described and tested in this research. The workflow aims to take advantage of these two distinctive design paradigms. This paper describes a design experiment that called for a NURBS roof generated by sweeping profiles along a curved path. Computer applications in the field of architecture are often based on a diverse range of design paradigms. We assumed the use of multiple applications, using various file formats, are facts and are unlikely to disappear. Given that interoperability issues will certainly arise, in this article, we propose and test a design workflow using parametric modeling, generative programming, and building information modeling. Our objective is to test the efficiency and improve upon the compatibility between Parametric-Algorithmic-Design and BIM applications. Our major contribution was defining a workflow for designing NURBS surfaces and corresponding supporting structures enhancing interoperability among different applications through generative-programming.
keywords	NURBS, Parametrics, Programming, Interoperability, BIM
series	CAAD Futures
email
last changed	2019/07/29 14:08

For more results click below: