Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 614

Reformat results as: short short into frame detailed detailed into frame

_id	cf2019_005
id	cf2019_005
authors	Eisenstadt, Viktor; Klaus-Dieter Althoff and Christoph Langenhan
year	2019
title	Supporting Architectural Design Process with FLEA A Distributed AI Methodology for Retrieval, Suggestion, Adaptation, and Explanation of Room Conﬁgurations
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 24
summary	The artiﬁcial intelligence methods, such as case-based reasoning and artiﬁcial neural networks were already applied to the task of architectural design support in a multitude of speciﬁc approaches and tools. However, modern AI trends, such as Explainable AI (XAI), and additional features, such as providing contextual suggestions for the next step of the design process, were rarely considered an integral part of these approaches or simply not available. In this paper, we present an application of a distributed AI-based methodology FLEA (Find, Learn, Explain, Adapt) to the task of room conﬁguration during the early conceptual phases of architectural design. The implementation of the methodology in the framework MetisCBR applies CBR-based methods for retrieval of similar ﬂoor plans to suggest possibly inspirational designs and to explain the returned results with speciﬁc explanation patterns. Furthermore, it makes use of a farm of recurrent neural networks to suggest contextually suitable next conﬁguration steps and to present design variations that show how the designs may evolve in the future. The ﬂexibility of FLEA allows for variational use of its components in order to activate the currently required modules only. The methodology was initialized during the basic research project Metis (funded by German Research Foundation) during which the architectural semantic search patterns and a family of corresponding ﬂoor plan representations were developed. FLEA uses these patterns and representations as the base for its semantic search, explanation, next step suggestion, and adaptation components. The methodology implementation was iteratively tested during quantitative evaluations and user studies with multiple ﬂoor plan datasets.
keywords	Room con?guration, Distributed AI, Case-based reasoning, Neural networks, Explainable AI
series	CAAD Futures
type	normal paper
email
last changed	2019/07/29 14:11

_id	sigradi2023_416
id	sigradi2023_416
authors	Machado Fagundes, Cristian Vinicius, Miotto Bruscato, Léia, Paiva Ponzio, Angelica and Chornobai, Sara Regiane
year	2023
title	Parametric environment for internalization and classification of models generated by the Shap-E tool
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1689–1698
summary	Computing has been increasingly employed in design environments, primarily to perform calculations and logical decisions faster than humans could, enabling tasks that would be impossible or too time-consuming to execute manually. Various studies highlight the use of digital tools and technologies in diverse methods, such as parametric modeling and evolutionary algorithms, for exploring and optimizing alternatives in architecture, design, and engineering (Martino, 2015; Fagundes, 2019). Currently, there is a growing emergence of intelligent models that increasingly integrate computers into the design process. Demonstrating great potential for initial ideation, artificial intelligence (AI) models like Shap-E (Nichol et al., 2023) by OpenAI stand out. Although this model falls short of state-of-the-art sample quality, it is among the most efficient orders of magnitude for generating three-dimensional models through AI interfaces, offering practical balance for certain use cases. Thus, aiming to explore this gap, the presented study proposes an innovative design agency framework by employing Shap-E connected with parametric modeling in the design process. The generation tool has shown promising results; through generations of synthetic views conditioned by text captions, its final output is a mesh. However, due to the lack of topological information in models generated by Shap-E, we propose to fill this gap by transferring data to a parametric three-dimensional surface modeling environment. Consequently, this interaction's use aims to enable the transformation of the mesh into quantifiable surfaces, subject to collection and optimization of dimensional data of objects. Moreover, this work seeks to enable the creation of artificial databases through formal categorization of parameterized outputs using the K-means algorithm. For this purpose, the study methodologically orients itself in a four-step exploratory experimental process: (1) creation of models generated by Shap-E in a pressing manner; (2) use of parametric modeling to internalize models into the Grasshopper environment; (3) generation of optimized alternatives using the evolutionary algorithm (Biomorpher); (4) and classification of models using the K-means algorithm. Thus, the presented study proposes, through an environment of internalization and classification of models generated by the Shap-E tool, to contribute to the construction of a new design agency methodology in the decision-making process of design. So far, this research has resulted in the generation and classification of a diverse set of three-dimensional shapes. These shapes are grouped for potential applications in machine learning, in addition to providing insights for the refinement and detailed exploration of forms.
keywords	Shap-E, Parametric Design, Evolutionary Algorithm, Synthetic Database, Artificial Intelligence
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ecaadesigradi2019_282
id	ecaadesigradi2019_282
authors	Fernández González, Alberto, Guerrero del Rio, Camilo and Jorquera Sepúlveda, Layla
year	2019
title	BIM Chilean Social Housing Analysis - from the 70´s to 90´s
doi	https://doi.org/10.52842/conf.ecaade.2019.1.259
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 259-266
summary	This research based on education digs on the "evolution" of Chilean social housing between the period from 70's to 90's asking us the "phylogenic" relation between "typos" of designs that developed several problems in the urban fabric development during 20 years of intricate design just thinking in quantity but not quality in our country.The focus in this research is as the first step understanding the design behind dwellings between this time range, then its process of evolution and transformation by users, and then by BIM understand the virtues and defects of each design and rethink the typologies in a housing life cycle look for the next years.
keywords	BIM; Social Housing; Catalogue; Design; Intervention; Strategies
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:50

_id	ecaadesigradi2019_302
id	ecaadesigradi2019_302
authors	Mrosla, Laura, Koch, Volker and von Both, Petra
year	2019
title	Quo vadis AI in Architecture? - Survey of the current possibilities of AI in the architectural practice
doi	https://doi.org/10.52842/conf.ecaade.2019.2.045
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-54
summary	The permeation of various fields by the applications of artificial intelligence (AI) has arrived in the collective consciousness and is increasingly present in the physical world. Current results of AI research in the field of architecture illustrate that already today within every step of the architectural conception and fabrication approaches towards their automation are being made. Even the very human features of motivation and creativity aren't left untouched anymore. This paper discusses, on the basis of different concepts and examples, up to what extent the contemporary possible implementations of AI and their underlying algorithms are able to conquer the architectural profession. Furthermore, it presents a summary of an automation-concept for the whole profession.
keywords	Artificial Neural Networks; Artificial Intelligence; Creativity; Architecture; Automatisation
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	ecaade2020_138
id	ecaade2020_138
authors	Patel, Sayjel Vijay, Tchakerian, Raffi, Lemos Morais, Renata, Zhang, Jie and Cropper, Simon
year	2020
title	The Emoting City - Designing feeling and artificial empathy in mediated environments
doi	https://doi.org/10.52842/conf.ecaade.2020.2.261
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 261-270
summary	This paper presents a theoretical blueprint for implementing artificial empathy into the built environment. Transdisciplinary design principles have oriented the creation of a new model for autonomous environments integrating psychology, architecture, digital media, affective computing and interactive UX design. 'The Emoting City', an interactive installation presented at the 2019 Shenzhen Bi-City Biennale of Urbanism/Architecture, is presented as a first step to explore how to engage AI-driven sensing by integrating human perception, cognition and behaviour in a real-world scenario. The approach described encompasses two main elements: embedded cyberception and responsive surfaces. Its human-AI interface enables new modes of blended interaction that are conducive to self-empathy and insight. It brings forth a new proposition for the development of sensing systems that go beyond social robotics into the field of artificial empathy. The installation innovates in the design of seamless affective computing that combines 'alloplastic' and 'autoplastic' architectures. We believe that our research signals the emergence of a potential revolution in responsive environments, offering a glimpse into the possibility of designing intelligent spaces with the ability to sense, inform and respond to human emotional states in ways that promote personal, cultural and social evolution.
keywords	Artificial Intelligence; Responsive Architecture; Affective Computation; Human-AI Interfaces; Artificial Empathy
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaadesigradi2019_470
id	ecaadesigradi2019_470
authors	Silva, Luísa, Mussi, Andrea and Silva, Thaísa
year	2019
title	Inclusive Architecture - Digital technologies and qualification of the project process
doi	https://doi.org/10.52842/conf.ecaade.2019.2.295
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 295-303
summary	This article presents the scenario of programming use by architects and engineers, creating their own unique tools. The goal is to emulate and understand the phenomenon of BIM software customization by developing plug-ins that can explore the human-environment relationship. Demonstrates the process for building a plugin that seeks to equalize the theory of accessibility technical standards, visually impaired and architects. Uses Design Science Research methodologies to guide the construction of artifacts for specific practical problems and the Collaborative Design / Codesign to understand and know the users' expertise. It is argued that the low quality of projects that include elements for the orientation of the visually impaired in Brazil is often related to an unstructured methodology in which important aspects such as the real needs of this group and the human-environment relationship are neglected.
keywords	BIM; Design Science Research; Codesign; Inclusive Project
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_101
id	ecaadesigradi2019_101
authors	Tebaldi, Isadora, Henriques, Gonçalo Castro and Passaro, Andres Martin
year	2019
title	A Generative System for the Terrain Vague - Transcarioca Bus Expressway in Rio de Janeiro
doi	https://doi.org/10.52842/conf.ecaade.2019.1.035
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
summary	The transport infrastructures are important elements in the cities, but, as there is a lack of planning, they tear through the urban fabric and leave empty spaces. Due to government and private disinterest, these spaces become vacant, forgotten and degraded. However, these extensive Terrain Vague offer new potential for urban use. To exploit this potential, we need methodologies that can offer personalised, extensive, feasible urban solutions. For this, we propose a computational generative system, following a 4-step methodology: 1) Site analyses and Terrain Vague identification; 2) Site classification according to parameters based on a "visual grammar"; 3) Algorithm associating space properties with geometric transformation to generate solutions: namely transformative operations in public spaces, additive transformations in semi-public spaces and subtractive operations in semi-private spaces; 4) Solution evaluation and development, according to shade criteria, spatial hierarchy and volumetric density. With our own algorithms combined with genetic algorithms, we guided the evolution of 50 volumetric solutions. The exponential increase in information requires new methodologies (Schwab, 2018). Results show the potential of computational methodologies to produce extensive urban solutions. This research, developed in a final graduation project in Architecture, aims at stimulating generative methodologies in undergraduate courses.
keywords	Terrain Vague; generative systems; parametric urbanism; genetic algorithms
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	ijac201917206
id	ijac201917206
authors	Ackerman, Aidan; Jonathan Cave, Chien-Yu Lin and Kyle Stillwell
year	2019
title	Computational modeling for climate change: Simulating and visualizing a resilient landscape architecture design approach
source	International Journal of Architectural Computing vol. 17 - no. 2, 125-147
summary	Coastlines are changing, wildfires are raging, cities are getting hotter, and spatial designers are charged with the task of designing to mitigate these unknowns. This research examines computational digital workflows to understand and alleviate the impacts of climate change on urban landscapes. The methodology includes two separate simulation and visualization workflows. The first workflow uses an animated particle fluid simulator in combination with geographic information systems data, Photoshop software, and three-dimensional modeling and animation software to simulate erosion and sedimentation patterns, coastal inundation, and sea level rise. The second workflow integrates building information modeling data, computational fluid dynamics simulators, and parameters from EnergyPlus and Landsat to produce typologies and strategies for mitigating urban heat island effects. The effectiveness of these workflows is demonstrated by inserting design prototypes into modeled environments to visualize their success or failure. The result of these efforts is a suite of workflows which have the potential to vastly improve the efficacy with which architects and landscape architects use existing data to address the urgency of climate change.
keywords	Modeling, simulation, environment, ecosystem, landscape, climate change, sea level rise, urban heat island
series	journal
email
last changed	2019/08/07 14:04

_id	caadria2019_190
id	caadria2019_190
authors	Chan, Zion and Crolla, Kristof
year	2019
title	Simplifying Doubly Curved Concrete - Post-Digital Expansion of Concrete's Construction Solution Space
doi	https://doi.org/10.52842/conf.caadria.2019.1.023
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 23-32
summary	This action research project develops a novel conceptual method for non-standardised concrete construction component fabrication and tests its validity through a speculative design project. The paper questions the practical, procedural and economic drivers behind the design and construction of geometrically complex concrete architecture. It proposes an alternative, simple and economical fabrication method for doubly curved concrete centred on the robotic manufacturing of casting moulds through 5-axis hotwire foam cutting for the making of doubly-curved fiber-reinforced concrete (FRC) panels. These panels are used as light-weight sacrificial formwork for in-situ concrete casting. The methodology's opportunity space is tested, evaluated and discussed through a conceptual architectural design project proposal that operates as demonstrator. The paper concludes by addressing the advantages of a design-and-build architecture delivery setup, the potential from using computational technology to adapt conventional design and construction procedures and the expanded role within the design and construction process this gives to architects.
keywords	Doubly Curved Concrete; Robotic Manufacture; Post-Digital Architecture; Design and Build; Casting Mould Making
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia19_642
id	acadia19_642
authors	Chua, Pamela Dychengbeng; Hui, Lee Fu
year	2019
title	Compliant Laminar Assemblies
doi	https://doi.org/10.52842/conf.acadia.2019.642
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 642-653
summary	This paper presents an innovative approach to the design and fabrication of three-dimensional objects from single-piece flat sheets, inspired by the origami technique of twist-closing. While in origami twist-closing is merely used to stabilize a cylindrical or spherical structure, ensuring it maintains its shape, this research investigates the potential of twist-closing as a multi-functional mechanism that also activates and controls the transformation of a planar surface into a predesigned three-dimensional form. This exploration is directed towards an intended application to stiff and brittle sheet materials that are difficult to shape through other processes. The methods we have developed draw mainly upon principles of lattice kirigami and laminar reciprocal structures. These are reflected in a workflow that integrates digital form-generation and fabrication-rationalization techniques to reference and apply these principles at every stage. Significant capabilities of the developed methodology include: (1) achievement of pseudo-double-curvature with brittle, stiff sheet materials; (2) stabilization in a 3D end-state as a frameless self-contained single-element laminar reciprocal structure—essentially a compliant mechanism; and (3) an ability to pre-encode 3D assembly constraints in a 2D cutout pattern, which guides a moldless fabrication process. The paper reviews the precedent geometric techniques and principles that comprise this method of 3D surface fabrication and describes a sample deployment of the method as applied to the design of laminar modules made of high-pressure laminate (HPL).
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_250
id	ecaadesigradi2019_250
authors	Czyñska, Klara
year	2019
title	Visual Impact Analysis of Large Urban Investments on the Cityscape
doi	https://doi.org/10.52842/conf.ecaade.2019.3.297
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 297-304
summary	The article presents the assessment method for large (horizontally spread) urban investment and its visual impact on the cityscape using digital analyses. The visual impact assessment is often used in relation to facilities which dominate in the cityscape, mainly tall buildings. Various studies, however, examine the impact of wide but relatively low-rising buildings and their impact on the cityscape. The article presents a methodology for the assessment of the visual impact and a case study for a building facility comprising several tightly developed and medium height blocks of buildings in a city center of a significant historical value in Gdañsk, Poland. The research has been based on the Visual Impact Size method (VIS) and a city model consisting of a regular cloud of points (Digital Surface Model). The simulation has been developed using a dedicated C++ software (developed by author). The study aimed at assessing the following: a) to what degree such an urban investment can influence the cityscape; b) how the impact can be analyzed using digital techniques, and c) what input parameters of the analysis are crucial for satisfactory accuracy of its results.
keywords	digital cityscape analysis; urban skyline; large urban investments; visual impact; VIS method
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	acadia19_130
id	acadia19_130
authors	Devadass, Pradeep; Heimig, Tobias; Stumm, Sven; Kerber, Ethan; Cokcan, Sigrid Brell
year	2019
title	Robotic Constraints Informed Design Process
doi	https://doi.org/10.52842/conf.acadia.2019.130
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 130-139
summary	Promising results in efficiently producing highly complex non-standard designs have been accomplished by integrating robotic fabrication with parametric design. However, the project workflow is hampered due to the disconnect between designer and robotic fabricator. The design is most often developed by the designer independently from fabrication process constraints. This results in fabrication difficulties or even non manufacturable components. In this paper we explore the various constraints in robotic fabrication and assembly processes, analyze their influence on design, and propose a methodology which bridges the gap between parametric design and robotic production. Within our research we investigate the workspace constraints of robots, end effectors, and workpieces used for the fabrication of an experimental architectural project: “The Twisted Arch.” This research utilizes machine learning approaches to parameterize, quantify, and analyze each constraint while optimizing how those parameters impact the design output. The research aims to offer a better planning to production process by providing continuous feedback to the designer during early stages of the design process. This leads to a well-informed “manufacturable” design.
keywords	Robotic Fabrication and Assembly, Mobile Robotics, Machine Learning, Parametric Design, Constraint Based Design.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	cf2019_006
id	cf2019_006
authors	Di Mascio, Danilo
year	2019
title	Visualizing Mackintosh’s alternative design proposal for Scotland Street School
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 25
summary	This paper describes the process of creation of a set of visualizations (elevations, perspective views and a short animation) of C.R. Mackintosh’s original but unrealized first design proposal for Scotland Street School (dated January 1904). Moreover, the piece of writing reflects upon some key aspects of the project such as how architectural historians were involved and how ambiguities due to the discrepancies between the drawings and missing details were resolved by studying multiple drawings and transferring clues from other Mackintosh’s built works. The contributions of this research are important for several reasons: it proposes a methodology that can be applied to similar research projects; it explains the educational value of the development work, which can be defined as digitally handcrafted, behind the visualisations; it contributes to studies of buildings designed by C.R. Mackintosh by using digital technologies that open up new insights to aspects still overlooked of his architectural production.
keywords	digital handcrafter, digital heritage, 3D digital reconstruction, visualisation, Charles Rennie Mackintosh
series	CAAD Futures
email
last changed	2019/07/29 14:08

_id	ecaadesigradi2019_421
id	ecaadesigradi2019_421
authors	Djuric, Isidora, Stojakovic, Vesna, Misic, Snezana, Kekeljevic, Igor, Vasiljevic, Ivana, Obradovic, Milos and Obradovic, Ratko
year	2019
title	Church Heritage Multimedia Presentation - Case study of the iconostasis as the characteristic art and architectural element of the Christian Orthodox churches
doi	https://doi.org/10.52842/conf.ecaade.2019.1.551
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 551-560
summary	This paper is part of ongoing research which aims is to develop the methodology for the church heritage digitization and visualization. The subject of the presented work is the iconostasis, as a significant part of the Christian Orthodox church heritage, distinguished by its bilateral character, as an architectural element of a church interior and an art piece composed of icons. Considering that iconostases can be seen only in situ, we developed the methodology for its digitization and virtual representation dissemination, which provides a user with the possibility to visualize iconostases outside the physical borders of sacral interiors. The proposed methodology relies on techniques for photogrammetric surveying, 3D modeling, and augmented reality visualization, and it is presented in a particular case study of the iconostasis. An outcome is shown as the multimedia presentation of an exhibition, realized throughout collaboration between the university and the museum.
keywords	church heritage; iconostasis; multimedia presentation; photogrammetry; AR
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	cf2019_050
id	cf2019_050
authors	Erdine, Elif ; Giulio Gianni, Angel Fernando Lara Moreira, Alvaro Lopez Rodriguez, Yutao Song and Alican Sungur
year	2019
title	Robot-Aided Fabrication of Light-Weight Structures with Sheet Metal Expansion
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 433
summary	This paper presents a novel approach for the creation of metal lightweight self-supporting structures through the employment of metal kerfing and robotic sheet panel expansion. Research objectives focus on the synthesis of material behavior on a local scale and the structural performance on a global scale via advanced computational and robotic methods. There are inherent structural properties to expanded metal sheets which can be employed to achieve an integrated building system without the need for a secondary supporting structure. A computational workflow that integrates Finite Element Analysis, geometrical optimization, and robotic toolpath planning has been developed. This workflow is informed by the parameters of material experimentation on sheet metal kerfing and robotic sheet metal expansion on the local panel scale. The proposed methodology is applied on a range of panels with a custom-built robotic fabrication setup for the design, fabrication, and assembly of a one-to-one scale working prototype.
keywords	Robotic fabrication, Robotic sheet metal expansion, Light-weight structure, Metal kerfing, Metal expansion
series	CAAD Futures
email
last changed	2019/07/29 14:18

_id	lasg_whitepapers_2019_111
id	lasg_whitepapers_2019_111
authors	Gruber, Petra
year	2019
title	Living Wall System (LIWAS)
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.111 - 122
summary	This proposal is about the design and prototyping of a Living Wall System (LIWAS) as a test bed for integrating concepts from biology into architectural design. The "Living Wall” is a new way of interpreting a wall system that we use in architecture and building. We try to integrate characteristics of living organisms into the wall design to harness some of the intriguing qualities of life into our built surroundings. Living Walls may include flows of water; they may move, adapt geometry and change appearance; they may be inhabited by algae, plants and other organisms and in general be “alive.” The framework of the proposal is the overlap between architectural design and biological research, using biomimicry as a methodology for information transfer between the fields (Image 1).
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	acadia19_16
id	acadia19_16
authors	Hosmer, Tyson; Tigas, Panagiotis
year	2019
title	Deep Reinforcement Learning for Autonomous Robotic Tensegrity (ART)
doi	https://doi.org/10.52842/conf.acadia.2019.016
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 16-29
summary	The research presented in this paper is part of a larger body of emerging research into embedding autonomy in the built environment. We develop a framework for designing and implementing effective autonomous architecture defined by three key properties: situated and embodied agency, facilitated variation, and intelligence.We present a novel application of Deep Reinforcement Learning to learn adaptable behaviours related to autonomous mobility, self-structuring, self-balancing, and spatial reconfiguration. Architectural robotic prototypes are physically developed with principles of embodied agency and facilitated variation. Physical properties and degrees of freedom are applied as constraints in a simulated physics-based environment where our simulation models are trained to achieve multiple objectives in changing environments. This holistic and generalizable approach to aligning deep reinforcement learning with physically reconfigurable robotic assembly systems takes into account both computational design and physical fabrication. Autonomous Robotic Tensegrity (ART) is presented as an extended case study project for developing our methodology. Our computational design system is developed in Unity3D with simulated multi-physics and deep reinforcement learning using Unity’s ML-agents framework. Topological rules of tensegrity are applied to develop assemblies with actuated tensile members. Single units and assemblies are trained for a series of policies using reinforcement learning in single-agent and multi-agent setups. Physical robotic prototypes are built and actuated to test simulated results.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	caadria2019_643
id	caadria2019_643
authors	Hramyka, Alina, Grewal, Neil, Makki, Mohammed and Dillon, Brittney
year	2019
title	Intelligent Territory - A responsive cooling tower and shading system for arid environments
doi	https://doi.org/10.52842/conf.caadria.2019.2.571
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 571-580
summary	Climatic change coupled with desertification processes impacting cities located around the Mediterranean, has raised serious questions for the capability of the affected cities to adapt to the rapidly changing environmental conditions. This research aims to design small-scale tower structures and shading devices in Nicosia, Cyprus through employing environmental analyses within a generative design process to create an intelligent, adaptive system. Guided by Bernoulli's principles, geometrical design parameters acquired from fluid simulations, alongside solar analyses of the existing city fabric, were used to generate an evolutionary algorithm for design. The research develops a methodology to facilitate environmental flows in urban architectural systems, generating cooling processes in arid environments that facilitate the adaptation of cities to changes in climatic and environmental conditions.
keywords	CFD Simulation; Generative Design; Desertification; Passive cooling system
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	ecaadesigradi2019_305
id	ecaadesigradi2019_305
authors	Kabošová, Lenka, Worre Foged, Isak, Kme, Stanislav and Katunský, Dušan
year	2019
title	Building envelope adapting from and to the wind flow
doi	https://doi.org/10.52842/conf.ecaade.2019.2.131
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 131-138
summary	The paper presents research for wind-responsive architecture. The main objective is the digital design methodology incorporating the dynamic, fluctuating wind flow into the shape-generating process of architectural envelopes. These computational studies are advanced and informed through physical prototyping models, allowing a hybrid method approach. The negative impacts of the wind at the building scale (wind loads), as well as urban scale (wind discomfort), can be avoided and even transformed into an advantage by incorporating the local wind conditions to the process of creating architectural envelopes with adaptive structures. The paper proposes a tensegrity-membrane system which, when exposed to the dynamic wind flow, enables a local passive shape adaptation. Thus, the action of the wind pressure transforms the shape of the building envelope to an unsmoothed, dimpled surface. As a consequence, the aerodynamic properties of the building are modified, which contributes to reducing wind suction and drag force. Moreover, the slight shape change materializes and articulates the immaterial wind phenomena. For a better understanding of the dynamic geometric properties, one unit of the wind-responsive envelope is tested through simulations, and through physical prototypes. The idea and material-geometric studies are subsequently applied in a specific case study, including a designed building envelope in an industrial silo cluster in Stockholm.
keywords	adaptive envelope; tensegrity; wind flow; digital designing; shape-change
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

For more results click below: