Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	acadia19_110
id	acadia19_110
authors	Tracy, Kenneth; Gupta, Sachin Sean; Stella, Loo Yi Ning; Wen, So Jing; Pal, Abhipsa
year	2019
title	Tensile Configurations
doi	https://doi.org/10.52842/conf.acadia.2019.110
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 110-119
summary	Structural membranes exhibit advantages over slab and frame structures, accommodating large deformations while still elegantly combining spatial enclosure with material efficiency. One of the most promising types of membrane structures are membrane tensegrity structures, which are composed of discontinuous struts embedded in a tensile membrane. To date, membrane tensegrity structures are limited to completely closed formations or require extensive tethering, hindering their applicability for diverse architectural contexts. Here, a design framework is presented for creating self-supporting membrane tensegrity shell structures with spatial openings, enabled by novel reciprocally tessellated strut configurations. Through a combination of heuristic physical prototyping and digital formfinding tools, a library of membrane tensegrity forms has been developed that serves as tangible data for an expanded morphospace. To test the effectiveness of the established methods, a 10 m2 membrane tensegrity shell pavilion was built as a first large-scale demonstrator. Feedback from this demonstrator led to the development of computational strut tessellation tools that enable the search for informed, performance-driven design space.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	acadia19_654
id	acadia19_654
authors	Maierhofer, Mathias; Soana, Valentina; Yablonina, Maria; Erazo, Seiichi Suzuki; Körner, Axel; Knippers, Jan; Menges, Achim
year	2019
title	Self-Choreographing Network
doi	https://doi.org/10.52842/conf.acadia.2019.654
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 654-663
summary	The aim of this research is to challenge the prevalent separation between (digital) design and (physical) operation processes of adaptive and interactive architectural systems. The linearity of these processes implies predetermined material or kinetic behaviors, limiting performances to those that are predictable and safe. This is particularly restricting with regard to compliant or flexible material systems, which exhibit significant kinetic and thus adaptive potential, but behave in ways that are difficult to fully predict in advance. In this paper we present a hybrid approach: a real-time, interactive design and operation process that enables the (material) system to be self-aware, fully utilizing and exploring its kinetic design space for adaptive purposes. The proposed approach is based on the interaction of compliant materials with embedded robotic agents, at the interface between digital and physical. This is demonstrated in the form of a room-scale spatial architectural robot, comprising networks of linear elastic components augmented with robotic joints capable of sensing and two axis actuation. The system features both a physical instance and a corresponding digital twin that continuously augments physical performances based on simulation feedback informed by sensor data from the robotic joints. With this setup, spatial adaptation and reconfiguration can be designed in real-time, based on an openended and cyber-physical negotiation between numerical, robotic, material, and human behaviors, in the context of a physically deployed structure and its occupants.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	caadria2019_660
id	caadria2019_660
authors	Aghaei Meibodi, Mania, Giesecke, Rena and Dillenburger, Benjamin
year	2019
title	3D Printing Sand Molds for Casting Bespoke Metal Connections - Digital Metal: Additive Manufacturing for Cast Metal Joints in Architecture
doi	https://doi.org/10.52842/conf.caadria.2019.1.133
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 133-142
summary	Metal joints play a relevant role in space frame constructions, being responsible for large amount of the overall material and fabrication cost. Space frames which are constructed with standardized metal joints are constrained to repetitive structures and topologies. For customized space frames, the fabrication of individual metal joints still remains a challenge. Traditional fabrication methods such as sand casting are labour intensive, while direct 3D metal printing is too expensive and slow for the large volumes needed in architecture.This research investigates the use of Binder Jetting technology to 3D print sand molds for casting bespoke metal joints in architecture. Using this approach, a large number of custom metal joints can be fabricated economically in short time. By automating the generation of the joint geometry and the corresponding mold system, an efficient digital process chain from design to fabrication is established. Several design studies for cast metal joints are presented. The approach is successfully tested on the example of a full scale space frame structure incorporating almost two hundred custom aluminum joints.
keywords	3D printing; binder jetting; sand casting; metal joints; metal casting; space frame; digital fabrication; computational design; lightweight; customization
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia19_208
id	acadia19_208
authors	Baghi, Ali; Baghi, Aryan; Kalantari, Saleh
year	2019
title	FLEXI-NODE
doi	https://doi.org/10.52842/conf.acadia.2019.207
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 207-218
summary	This paper is part of an ongoing research project on flexible molds for use in concrete fabrication. It continues and advances the concept of adjustable molds by creating a flexible system to produce a variety of concrete grid-joints. This reusable and adaptive mold streamlines the process of fabricating inherently diverse nodal joints without the need for cost-intensive mass-customization methods. The paper also proposes a novel way to cope with some of the significant drawbacks of similar mold techniques that have been explored and found wanting in similar projects. The technique used for the mold in the current research is inspired by a flexible mechanism that has been implemented in other manufacturing contexts, such as expansion joints and bendable straws. The outcomes of the project are a platform called “Flexi-node” and relevant software components that allow users to computationally design and fabricate a great variety of concrete joints for grid structures, using just one mold, with minimum material waste and no distortion from hydrostatic pressure.
keywords	flexible molds, nodal joints, computational design, concrete fabrication, mass customization, grid structures
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_449
id	ecaadesigradi2019_449
authors	Becerra Santacruz, Axel
year	2019
title	The Architecture of ScarCity Game - The craft and the digital as an alternative design process
doi	https://doi.org/10.52842/conf.ecaade.2019.3.045
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 45-52
summary	The Architecture of ScarCity Game is a board game used as a pedagogical tool that challenges architecture students by involving them in a series of experimental design sessions to understand the design process of scarcity and the actual relation between the craft and the digital. This means "pragmatic delivery processes and material constraints, where the exchange between the artisan of handmade, representing local skills and technology of the digitally conceived is explored" (Huang 2013). The game focuses on understanding the different variables of the crafted design process of traditional communities under conditions of scarcity (Michel and Bevan 1992). This requires first analyzing the spatial environmental model of interaction, available human and natural resources, and the dynamic relationship of these variables in a digital era. In the first stage (Pre-Agency), the game set the concept of the craft by limiting students design exploration from a minimum possible perspective developing locally available resources and techniques. The key elements of the design process of traditional knowledge communities have to be identified (Preez 1984). In other words, this stage is driven by limited resources + chance + contingency. In the second stage (Post-Agency) students taking the architects´ role within this communities, have to speculate and explore the interface between the craft (local knowledge and low technological tools), and the digital represented by computation data, new technologies available and construction. This means the introduction of strategy + opportunity + chance as part of the design process. In this sense, the game has a life beyond its mechanics. This other life challenges the participants to exploit the possibilities of breaking the actual boundaries of design. The result is a tool to challenge conventional methods of teaching and leaning controlling a prescribed design process. It confronts the rules that professionals in this field take for granted. The game simulates a 'fake' reality by exploring in different ways with surveyed information. As a result, participants do not have anything 'real' to lose. Instead, they have all the freedom to innovate and be creative.
keywords	Global south, scarcity, low tech, digital-craft, design process and innovation by challenge.
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	acadia19_80
id	acadia19_80
authors	Bouayad, Ghali
year	2019
title	Three-Dimensional Translation of Japanese Katagami Patterns
doi	https://doi.org/10.52842/conf.acadia.2019.080
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 80-89
summary	The aim of this ongoing doctoral research is to rely on the incommensurable potential held in Japanese Katagami patterns in order to translate them into three-dimensional speculative architectures and architectural components that afford architects other design approaches differentiated from systemic and typical space configurations. While many designers are diving in the generative and computational design world by developing new personal methods, we would like to recycle the existing production of Katagami patterns into three-dimensional architectural elements that will perpetuate work of Katagami artists beyond time, borders, and scope of applicability. Given that the current digital shift has given us more computation power, we are broadening Katagami with new fabrication strategies and new methods to explore, produce, and stock geometry and data. In this paper, we rely on the Processing library IGeo (developed by Satoru Sugihara) to build bottom-up agent-based algorithms to study the architectural potential of Katagami patterns as a top-down clean and simple initial topology that avoids imitation of standard templates applied during the process of configuring and planning architectural space.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_205
id	ecaadesigradi2019_205
authors	Campos, Filipe Medéia de, Leite, Raquel Magalh?es, Prudencio, Christina Figueiredo, Dias, Maíra Sebasti?o and Celani, Gabriela
year	2019
title	Prototyping a Facade Component - Mixed technologies applied to fabrication
doi	https://doi.org/10.52842/conf.ecaade.2019.1.179
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 179-186
summary	During the last decade, mass customization in developing countries has been rising. The combination of conventional methods and materials with computer numeric control technologies offers a possibility of merging established craftsmanship to the production of personalized components with mass production efficiency. This article aims to present the development of a facade component prototype as a means to prospect possibilities for mixing parametric design and digital fabrication to casting, especially in developing countries like Brazil. This is an applied research with an exploratory and constructive approach, which was a result of a graduate class structured on a research by design basis. The conceptual development and prototyping of the artifact followed iterative cycles, considering its performance, fabrication methods and feasibility. The selection of materials that are commonly used in Brazilian architecture, like concrete, facilitates the component adoption as as a facade solution. The main conclusion emphasizes the need of involvement between academia and industry for the development of innovative products and processes, and highlights different levels of mass customization to include a range of manufacturing agents, from major industries to local craftspeople.
keywords	digital fabrication; mass customization; prototyping; facade component
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	acadia19_642
id	acadia19_642
authors	Chua, Pamela Dychengbeng; Hui, Lee Fu
year	2019
title	Compliant Laminar Assemblies
doi	https://doi.org/10.52842/conf.acadia.2019.642
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 642-653
summary	This paper presents an innovative approach to the design and fabrication of three-dimensional objects from single-piece flat sheets, inspired by the origami technique of twist-closing. While in origami twist-closing is merely used to stabilize a cylindrical or spherical structure, ensuring it maintains its shape, this research investigates the potential of twist-closing as a multi-functional mechanism that also activates and controls the transformation of a planar surface into a predesigned three-dimensional form. This exploration is directed towards an intended application to stiff and brittle sheet materials that are difficult to shape through other processes. The methods we have developed draw mainly upon principles of lattice kirigami and laminar reciprocal structures. These are reflected in a workflow that integrates digital form-generation and fabrication-rationalization techniques to reference and apply these principles at every stage. Significant capabilities of the developed methodology include: (1) achievement of pseudo-double-curvature with brittle, stiff sheet materials; (2) stabilization in a 3D end-state as a frameless self-contained single-element laminar reciprocal structure—essentially a compliant mechanism; and (3) an ability to pre-encode 3D assembly constraints in a 2D cutout pattern, which guides a moldless fabrication process. The paper reviews the precedent geometric techniques and principles that comprise this method of 3D surface fabrication and describes a sample deployment of the method as applied to the design of laminar modules made of high-pressure laminate (HPL).
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_404
id	ecaadesigradi2019_404
authors	Collins, Jeffrey and Gentry, Russell
year	2019
title	Coordinating Atypical Architectural Precast Concrete Façades - Two categories
doi	https://doi.org/10.52842/conf.ecaade.2019.2.261
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 261-268
summary	This research focuses on issues of coordination between designers and fabricators during early design. The aim of this work is to improve representations, enable more informed conversations, and streamline exchanges of digital models. In order to show the potential of the work, research is focused on architectural precast concrete facades. Previous work established methods for linking "global" and "local" parametric models of architectural intent and corresponding components, describing processes of mapping from individual custom panels to diagrammatic façade surfaces and vice-versa. Such mapping may be considered "direct," wherein individual panel boundaries - defined by surface patterning - allow simple mapping of data from global to local or from local to global descriptions. However, there are some buildings with architectural precast concrete façades which do not permit direct relationships between global and local descriptions. These atypical facades require "indirect" maps containing additional layers of information in order to coordinate global and local descriptions. This paper describes two categories of these indirect scenarios: "panelization" and "patterns across panels."
keywords	BIM; Parametric modelling; Architectural precast concrete; Building facades
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	caadria2019_286
id	caadria2019_286
authors	Dobbs, Tiara
year	2019
title	Face-to-Face with People in Spaces - A method to identify face-to-face interactions using an indoor positioning system.
doi	https://doi.org/10.52842/conf.caadria.2019.2.643
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 643-652
summary	Recent developments in indoor positioning technology means gathering personal interaction data is possible however, the process of analysing this data to determine where and when interactions occur indoors is not yet standardised.This paper proposes a method to gather and examine indoor positioning data to infer face-to-face interactions indoors. The case study looks specifically at indoor office environment however the principles shown can be applied to other indoor spaces. This paper explores a high-level technological methodology that gathers indoor positioning data from users. A formula is used to calculate if, when and where interactions occur over a floor-plan, as well as visualising these interactions to highlight high and low interaction areas. The system considers the proximity between the individuals, the angle between their forward physical orientation, and any obstructions that might divide individuals from each other. The information presented in this paper can be used as a theoretical baseline to inform future post-occupancy evaluation methods. Additionally, this paper demonstrates the merit of using indoor positioning systems to test the effectiveness of design principles in encouraging face-to-face interactions of the users.
keywords	Post-occupancy evaluations; Face-to-face interac-tions; Indoor positioning system; Data driven design
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaadesigradi2019_309
id	ecaadesigradi2019_309
authors	Dokonal, Wolfgang and Medeiros, Marina Lima
year	2019
title	I Want To Ride My Bicycle – I Want To Ride My Bike - Using low cost interfaces for Virtual reality
doi	https://doi.org/10.52842/conf.ecaade.2019.2.465
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 465-472
summary	The paper will give an overview of our experiments in the past years in developing different interfaces and workflows for the use of low cost Head Mounted Displays (HMD) for Virtual Reality solution. We are mainly interested in using VR tools for designers in the early phases of their design. In our opinion VR tools can help to bring back a better understanding of space and scale which have been lost a little bit in the last century with the change from analogue to digital tools. After teaching architectural and urban design for many years we can clearly say that this effect is still ongoing and it is time that we develop digital tools that try to reverses thi effect. We will then concentrate within this paper on discussing some aspects of data reduction that are important to be able to use these tools in the design process. We are also showing how we use our interfaces presenting some results of student projects for a design in Hong Kong and the strategies and methods for using VR for a ongoing work on a project about the establishment of a so called "bicycle highway" in the city of Graz in Austria.
keywords	Virtual Reality; Head Mounted Displays; Low Cost Interfaces; EeZee click
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:55

_id	caadria2019_240
id	caadria2019_240
authors	Dorta, TomÃ¡s, Safin, StÃ©phane, BoudhraÃ¢, Sana and Beaudry Marchand, Emmanuel
year	2019
title	Co-Designing in Social VR - Process awareness and suitable representations to empower user participation
doi	https://doi.org/10.52842/conf.caadria.2019.2.141
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 141-150
summary	To allow non-designers' involvement in design projects new methods are needed. Co-design gives the same opportunity to all the multidisciplinary participants to co-create ideas simultaneously. Nevertheless, current co-design processes involving such users tend to limit their contribution to the proposal of basic design ideas only through brainstorming. The co-design approach needs to be enhanced by a properly suited representational ecosystem supporting active participation and by conscious use of structured verbal exchanges giving awareness of the creative process. In this respect, we developed two social virtual reality co-design systems, and a co-design verbal exchange methodology to favour participants' awareness of the co-creative process. By using such representations and verbal exchanges, participants could co-create with more ease by benefiting from being informed of the process and from the collective immersion, empowering their participation. This paper presents the rationale behind this approach of using Social VR in co-design and the feedback of three co-design workshops.
keywords	Social VR; Project awareness ; Representational ecosystem; User participation; Co-design
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia20_192p
id	acadia20_192p
authors	Doyle, Shelby; Hunt, Erin
year	2020
title	Melting 2.0
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 192-197
summary	This project presents computational design and fabrication methods for locating standard steel reinforcement within 3D printed water-soluble PVA (polyvinyl alcohol) molds to create non-standard concrete columns. Previous methods from “Melting: Augmenting Concrete Columns with Water Soluble 3D Printed Formwork” and “Dissolvable 3D Printed Formwork: Exploring Additive Manufacturing for Reinforced Concrete” (Doyle & Hunt 2019) were adapted for larger-scale construction, including the introduction of new hardware, development of custom programming strategies, and updated digital fabrication techniques. Initial research plans included 3D printing continuous PVA formwork with a KUKA Agilus Kr10 R1100 industrial robotic arm. However, COVID-19 university campus closures led to fabrication shifting to the author’s home, and this phase instead relied upon a LulzBot TAZ 6 (build volume of 280 mm x 280 mm x 250 mm) with an HS+ (Hardened Steel) tool head (1.2 mm nozzle diameter). Two methods were developed for this project phase: new 3D printing hardware and custom GCode production. The methods were then evaluated in the fabrication of three non-standard columns designed around five standard reinforcement bars (3/8-inch diameter): Woven, Twisted, Aperture. Each test column was eight inches in diameter (the same size as a standard Sonotube concrete form) and 4 feet tall, approximately half the height of an architecturally scaled 8-foot-tall column. Each column’s form was generated from combining these diameter and height restrictions with the constraints of standard reinforcement placement and minimum concrete coverage. The formwork was then printed, assembled, cast, and then submerged in water to dissolve the molds to reveal the cast concrete. This mold dissolving process limits the applicable scale for the work as it transitions from the research lab to the construction site. Therefore, the final column was placed outside with its mold intact to explore if humidity and water alone can dissolve the PVA formwork in lieu of submersion.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	caadria2019_106
id	caadria2019_106
authors	Dritsas, Stylianos, Vijay, Yadunund, Teo, Ryan, Halim, Samuel, Sanandiya, Naresh and Fernandez, Javier G.
year	2019
title	Additive Manufacturing with Natural Composites - From material intelligence to informed digital fabrication
doi	https://doi.org/10.52842/conf.caadria.2019.2.263
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 263-272
summary	We present results on the development of a sustainable digital manufacturing technology, discuss the challenges associated with additive manufacturing with natural materials, how statistical modelling techniques enabled understanding the intricate relationship between material and fabrication and allowed to control material extrusion. We present a prototype created to assess the ability of the process to create large-scale artifacts. We believe steps towards advancing methods for environmentally-aware digital fabrication may pave the way in transforming the industry and society towards more sustainable production and consumption paradigms.
keywords	Digital Fabrication; Bioinspired Materials
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	cf2019_014
id	cf2019_014
authors	Ferrando, Cecilia; Niccolo Dalmasso, Jiawei Mai, Daniel Cardoso Llach
year	2019
title	Architectural Distant Reading Using Machine Learning to Identify Typological Traits Across Multiple Buildings
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 114-127
summary	This paper introduces an approach to architectural “distant reading”: the use of computational methods to analyze architectural data in order to derive spatial insights from—and explore new questions concerning—large collections of architectural work. Through a case study comprising a dataset of religious buildings, we show how we may use machine learning techniques to identify typological and functional traits from building plans. We find that spatial structure, rather than local features, is particularly effective in supporting this type of analysis. Further, we speculate on the potential of this computational method to enrich architectural design, research, and criticism by, for example, enabling new ways of thinking about architectural concepts such as typology in ways that reflect gradual variations, rather than sharp distinctions.
keywords	Architectural Analytics, Machine Learning, Classification, Religious buildings, Space Syntax
series	CAAD Futures
email
last changed	2019/07/29 14:08

_id	lasg_whitepapers_2019_111
id	lasg_whitepapers_2019_111
authors	Gruber, Petra
year	2019
title	Living Wall System (LIWAS)
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.111 - 122
summary	This proposal is about the design and prototyping of a Living Wall System (LIWAS) as a test bed for integrating concepts from biology into architectural design. The "Living Wall” is a new way of interpreting a wall system that we use in architecture and building. We try to integrate characteristics of living organisms into the wall design to harness some of the intriguing qualities of life into our built surroundings. Living Walls may include flows of water; they may move, adapt geometry and change appearance; they may be inhabited by algae, plants and other organisms and in general be “alive.” The framework of the proposal is the overlap between architectural design and biological research, using biomimicry as a methodology for information transfer between the fields (Image 1).
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	ecaadesigradi2019_613
id	ecaadesigradi2019_613
authors	Guedes, Ítalo and Andrade, Max
year	2019
title	Automatic Rule-Based Checking for the Approval of Building Architectural Designs of Airport Passenger Terminals based on BIM
doi	https://doi.org/10.52842/conf.ecaade.2019.2.333
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 333-338
summary	In Brazil, the evaluation processes of building architectural designs of Airports Passenger Terminal (PT) are carried out manually. It depends on the architects' knowledge, leading to possible errors. On the other hand, the rule checking in BIM-modeled building projects opens up new horizons for this type of activity. Based on Code Checking concepts, this paper presents a method for automating rule checking for building code in building architectural design of PT. Following the aspects of Design Science Research, it is developed in two stages: Construction (theoretical foundation, creating rule checking for the PT, implementation of the rules in BIM softwares for code checking and validation) and Evaluation of artefact. This paper shows a series of problems resulting from the evaluation of PT using traditional methods. It can be concluded that the use of rules for regulatory code checking with BIM allows standardization in the evaluation of architectural design of PT.
keywords	Code Checking; Passenger Terminal; Building Information Modeling; Rule checking
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:51

_id	caadria2019_637
id	caadria2019_637
authors	Han, Dongchen, Zhang, Hong, Cui, Weiwen and Huang, Jie
year	2019
title	Towards to a Hybrid Model-Making Method based on Translations between Physical and Digital Models - A case study of the freeform architectural design
doi	https://doi.org/10.52842/conf.caadria.2019.2.561
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 561-570
summary	The extensive applications of digital models might decrease the capacity of physical model-making for perceptual thinking and enlarge the gap between architects and physical space with limited visual experience. This study aims to propose a reverse process for realizing translations between physical and digital model-making methods from which architects could maximize their initial ideas in conceptual design while allowing for rational digitalization in the detailed design. A review of Reverse Engineering architectural applications is presented and the hybrid method is proposed and examined in a freeform design case. The research shows that in the first translation phase, from handmade physical models to parametric digital models, freeform geometry could be better parameterized in a low degree of deformation based on photogrammetry. Meanwhile, in the second translation phase, from detailed digital models to large-scale physical models, the digitally-driven fabrication could be applied more precisely and automatically based on error handling by 3D laser scanning. Moreover, the process and algorithms developed for the hybrid model-making method indicate the possibility of being applied to further freeform architectural design cases.
keywords	Physical models; Digital models; RE technologies; Freeform design; Accuracy
series	CAADRIA
email
last changed	2022/06/07 07:50

For more results click below: