Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	ijac201917105
id	ijac201917105
authors	Agkathidis, Asterios; Yorgos Berdos and André Brown
year	2019
title	Active membranes: 3D printing of elastic fibre patterns on pre-stretched textiles
source	International Journal of Architectural Computing vol. 17 - no. 1, 74-87
summary	There has been a steady growth, over several decades, in the deployment of fabrics in architectural applications; both in terms of quantity and variety of application. More recently, three-dimensional printing and additive manufacturing have added to the palette of technologies that designers in architecture and related disciplines can call upon. Here, we report on research that brings those two technologies together – the development of active membrane elements and structures. We show how these active membranes have been achieved by laminating three-dimensional printed elasto-plastic fibres onto pre-stretched textile membranes. We report on a set of experimentations involving one-, two- and multi-directional geometric arrangements that take TPU 95 and polypropylene filaments and apply them to Lycra textile sheets, to form active composite panels. The process involves a parameterised design, actualised through a fabrication process including stress-line simulation, fibre pattern three-dimensional printing and the lamination of embossed patterns onto a pre-stretched membrane; followed by the release of tension afterwards in order to allow controlled, self-generation of the final geometry. Our findings document the investigation into mapping between the initial two-dimensional geometries and their resulting three-dimensional doubly curved forms. We also reflect on the products of the resulting, partly serendipitous, design process.
keywords	Digital fabrication, three-dimensional printing, parametric design, material computation, fabrics
series	journal
email
last changed	2019/08/07 14:04

_id	acadia19_642
id	acadia19_642
authors	Chua, Pamela Dychengbeng; Hui, Lee Fu
year	2019
title	Compliant Laminar Assemblies
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 642-653
doi	https://doi.org/10.52842/conf.acadia.2019.642
summary	This paper presents an innovative approach to the design and fabrication of three-dimensional objects from single-piece flat sheets, inspired by the origami technique of twist-closing. While in origami twist-closing is merely used to stabilize a cylindrical or spherical structure, ensuring it maintains its shape, this research investigates the potential of twist-closing as a multi-functional mechanism that also activates and controls the transformation of a planar surface into a predesigned three-dimensional form. This exploration is directed towards an intended application to stiff and brittle sheet materials that are difficult to shape through other processes. The methods we have developed draw mainly upon principles of lattice kirigami and laminar reciprocal structures. These are reflected in a workflow that integrates digital form-generation and fabrication-rationalization techniques to reference and apply these principles at every stage. Significant capabilities of the developed methodology include: (1) achievement of pseudo-double-curvature with brittle, stiff sheet materials; (2) stabilization in a 3D end-state as a frameless self-contained single-element laminar reciprocal structure—essentially a compliant mechanism; and (3) an ability to pre-encode 3D assembly constraints in a 2D cutout pattern, which guides a moldless fabrication process. The paper reviews the precedent geometric techniques and principles that comprise this method of 3D surface fabrication and describes a sample deployment of the method as applied to the design of laminar modules made of high-pressure laminate (HPL).
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia19_664
id	acadia19_664
authors	Koshelyuk, Daniil; Talaei, Ardeshir; Garivani, Soroush; Markopoulou, Areti; Chronis, Angelo; Leon, David Andres; Krenmuller, Raimund
year	2019
title	Alive
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 664-673
doi	https://doi.org/10.52842/conf.acadia.2019.664
summary	In the context of data-driven culture, built space still maintains low responsiveness and adaptability. Part of this reality lies in the low resolution of live information we have about the behavior and condition of surfaces and materials. This research addresses this issue by exploring the development of a deformation-sensing composite membrane material system following a bottom-up approach and combining various technologies toward solving related technical issues—exploring conductivity properties of graphene and maximizing utilization within an architecture-related proof-of-concept scenario and a workflow including design, fabrication, and application methodology. Introduced simulation of intended deformation helps optimize the pattern of graphene nanoplatelets (GNP) to maximize membrane sensitivity to a specific deformation type while minimizing material usage. Research explores various substrate materials and graphene incorporation methods with initial geometric exploration. Finally, research introduces data collection and machine learning techniques to train recognition of certain types of deformation (single point touch) on resistance changes. The final prototype demonstrates stable and symmetric readings of resistance in a static state and, after training, exhibits an 88% prediction accuracy of membrane shape on a labeled sample data-set through a pre-trained neural network. The proposed framework consisting of a simulation based, graphene-capturing fabrication method on stretchable surfaces, and includes initial exploration in neural network training shape detection, which combined, demonstrate an advanced approach to embedding intelligence.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	acadia19_168
id	acadia19_168
authors	Adilenidou, Yota; Ahmed, Zeeshan Yunus; Freek, Bos; Colletti, Marjan
year	2019
title	Unprintable Forms
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp.168-177
doi	https://doi.org/10.52842/conf.acadia.2019.168
summary	This paper presents a 3D Concrete Printing (3DCP) experiment at the full scale of virtualarchitectural bodies developed through a computational technique based on the use of Cellular Automata (CA). The theoretical concept behind this technique is the decoding of errors in form generation and the invention of a process that would recreate the errors as a response to optimization (Adilenidou 2015). The generative design process established a family of structural and formal elements whose proliferation is guided through sets of differential grids (multi-grids) leading to the build-up of large span structures and edifices, for example, a cathedral. This tooling system is capable of producing, with specific inputs, a large number of outcomes in different scales. However, the resulting virtual surfaces could be considered as "unprintable" either due to their need of extra support or due to the presence of many cavities in the surface topology. The above characteristics could be categorized as errors, malfunctions, or undesired details in the geometry of a form that would need to be eliminated to prepare it for printing. This research project attempts to transform these "fabrication imprecisions" through new 3DCP techniques into factors of robustness of the resulting structure. The process includes the elimination of the detail / "errors" of the surface and their later reinsertion as structural folds that would strengthen the assembly. Through this process, the tangible outputs achieved fulfill design and functional requirements without compromising their structural integrity due to the manufacturing constraints.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_425
id	ecaadesigradi2019_425
authors	Betti, Giovanni, Aziz, Saqib and Ron, Gili
year	2019
title	Pop Up Factory : Collaborative Design in Mixed Rality - Interactive live installation for the makeCity festival, 2018 Berlin
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 115-124
doi	https://doi.org/10.52842/conf.ecaade.2019.3.115
summary	This paper examines a novel, integrated and collaborative approach to design and fabrication, enabled through Mixed Reality. In a bespoke fabrication process, the design is controlled and altered by users in holographic space, through a custom, multi-modal interface. Users input is live-streamed and channeled to 3D modelling environment,on-demand robotic fabrication and AR-guided assembly. The Holographic Interface is aimed at promoting man-machine collaboration. A bespoke pipeline translates hand gestures and audio into CAD and numeric fabrication. This enables non-professional participants engage with a plethora of novel technology. The feasibility of Mixed Reality for architectural workflow was tested through an interactive installation for the makeCity Berlin 2018 festival. Participants experienced with on-demand design, fabrication an AR-guided assembly. This article will discuss the technical measures taken as well as the potential in using Holographic Interfaces for collaborative design and on-site fabrication.Please write your abstract here by clicking this paragraph.
keywords	Holographic Interface; Augmented Reality; Multimodal Interface; Collaborative Design; Robotic Fabrication; On-Site Fabrication
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	caadria2019_491
id	caadria2019_491
authors	Cai, Chenyi, Tang, Peng and Li, Biao
year	2019
title	Intelligent Generation of Architectural layout inheriting spatial features of Chinese Garden Based on Prototype and Multi-agent System - A Case Study on Lotus Teahouse in Yixing
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 291-300
doi	https://doi.org/10.52842/conf.caadria.2019.1.291
summary	This study presents an approach for the intelligent generation of architectural layout, in which partial space inherits Chinese garden spatial features. The approach combines spatial prototype analysis and evolutionary optimization process. On one hand, from the perspective of shape grammar, this paper both analyzes and abstracts the spatial prototype that describes the spatial characteristics of Chinese gardens, including the organization system of architecture and landscape, with the spatial sequences along the tourism orientation. On the other hand, taking the design task of Lotus teahouse as an example, a typical spatial prototype is selected to develop the generative intelligent experiment to achieve the architectural layout, in which the spatial prototype is inherited. Through rule-making and parameter adjustment, the spatial prototype will eventually be transformed into a computational model based on the multi-agent system. Hence, the experiment of intelligent generation of architectural layout is carried out under the influence of the function, form and environmental factors; and a three-dimensional conceptual model that inherits the Chinese garden spatial prototype is obtained ultimately.
keywords	Chinese garden; Architectural layout; Spatial prototype; Multi-agent system; Intelligent generation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2019_657
id	caadria2019_657
authors	Chen, Zhewen, Zhang, Liming and Yuan, Philip F.
year	2019
title	Innovative Design Approach to Optimized Performance on Large-Scale Robotic 3D-Printed Spatial Structure
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 451-460
doi	https://doi.org/10.52842/conf.caadria.2019.2.451
summary	This paper presents an innovative approach on designing large-scale spatial structure with automated robotic 3D-printing. The incipient design approach mainly focused on optimizing structural efficiency at an early design stage by transform the object into a discrete system, and the elements in this system contains unique structural parameters that corresponding to its topology results of stiffness distribution. Back in 2017, the design team already implemented this concept into an experimental project of Cloud Pavilion in Shanghai, China, and the 3D-printed spatial structure was partitioned into five zones represent different level of structure stiffness and filled with five kinds of unit toolpath accordingly. Through further research, an upgrade version, the project of Cloud Pavilion 2.0 is underway and will be completed in January 2019. A detailed description on innovative printing toolpath design in this project is conducted in this paper and explains how the toolpath shape effects its overall structural stiffness. This paper contributes knowledge on integrated design in the field of robotic 3D-printing and provides an alternative approach on robotic toolpath design combines with the optimized topological results.
keywords	3D-Printing; Robotic Fabrication; Structural Optimization; Discrete System; Toolpath Design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_358
id	ecaadesigradi2019_358
authors	Cocho-Bermejo, Ana and Navarro-Mateu, Diego
year	2019
title	User-centered Responsive Sunlight Reorientation System based on Multiagent Decision-making, UDaMaS
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 695-704
doi	https://doi.org/10.52842/conf.ecaade.2019.2.695
summary	UDaMaS (Universal Daylight Managing System), is a user-centered responsive system for built scenarios that can reorient sunlight to improve light conditions in specific urban environments.This on-going research is based on developing more efficient energy/light supply methods through IoT (internet of things) and data mining based on the improved relationship with technology.A user centered responsive multi-agent system using norm emergence is proposed for controlling the efficiency of sunlight reoriented society of mirror robots. Society of robots will make decisions about which users to serve, depending on the users' requests through the UdaMas app.
keywords	responsive; lighting; user-centric; multi-agent system; artificial intelligence; ambient intelligence
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_288
id	ecaadesigradi2019_288
authors	da Silva Lopes Vieira, Thomaz and Schulz, Jens-Uwe
year	2019
title	Design Method Aided by MABS and Cloud Computing - Framework integrating: construction techniques, materials, and fabrication
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 195-205
doi	https://doi.org/10.52842/conf.ecaade.2019.1.195
summary	This paper presents a novel method based in Multi-Agent Based Simulation (MABS), Cloud Computing, and the combination of big data analytics and IoT. The method performs in two layers: it assists designers with information coming from previews of projects and surroundings, and, it automates some procedures according to parameters and interactions between agents. The first part of this paper briefly describes the state of the art and challenges of the real estate market. The second chapter highlight gaps and future challenges in design practice, and in the third chapter, it introduces the method. To conclude, in the last part, this concept is analyzed through a pilot project under development in our institution.
keywords	Computational design; Multi-Agent-Based system; Robotic fabrication; Cyber-Physical Systems; Big Data; Internet of Things
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	caadria2019_242
id	caadria2019_242
authors	Davidova, Marie
year	2019
title	Intelligent Informed Landscapes - The Eco-Systemic Prototypical Interventions' Generative and Iterative Co-Designing Co-Performances, Agencies and Processes
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 151-160
doi	https://doi.org/10.52842/conf.caadria.2019.2.151
summary	The work fights for a shift from Anthropocene in urban environment through both, analogue and digital eco-systemic prototypical urban interventions, mixing biological as well as digital performances of post-digital landscape. It directly engages with the local human and non-human communities as well as it offers its online recipes and codes for DIY local iterations tagged in public space. Such intelligent and informed cultural landscape therefore covers several multi-layered generative and iterative agencies for its self-development.
keywords	Systemic Approach to Architectural Performance; Intelligent Informed Landscapes; Post-Anthropocene; Eco-Systemic Prototypical Urban Interventions ; DIY
series	CAADRIA
type	normal paper
email
last changed	2024/01/09 06:23

_id	cf2019_038
id	cf2019_038
authors	El-Dabaa, Rana and Sherif Abdelmohsen
year	2019
title	HMTM: Hygromorphic-Thermobimetal Composites as a Novel Approach to Enhance Passive Actuation of Adaptive Façades
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 290-300
summary	Typical adaptive facades rely on mechanical actuators that respond to the outdoor climate and regulate its effect on indoor spaces. With the emergence of ubiquitous computing, several studies have independently utilized the latent properties of programmable materials, such as the hygroscopic properties of wood and the difference in expansion coefficient of metals, to passively program material response. Motion stimuli vary for each material however, involving changes in humidity and temperature fluctuation for wood and metals respectively. This paper introduces Hygromorphic-Thermobimetal (HMTM), as a low-tech low-cost passive programmable composite. A series of physical experiments are conducted to deduce design parameters that induce specific actuation mechanisms based on the stimulation of both hygroscopic properties in wood and metal expansion through temperature variation. This allows for an extended implementation of the hygroscopic properties of wood and its actuation configurations in hot arid climates, where variation in temperature, rather than humidity, is more dominant.
keywords	Hygroscopic properties of wood, Passive actuation, Thermobimetals, Programmable materials, Adaptive façades
series	CAAD Futures
email
last changed	2019/07/29 14:15

_id	caadria2019_636
id	caadria2019_636
authors	Engholt, Jon and Pigram, Dave
year	2019
title	Tailored Flexibility - Reinforcing concrete fabric formwork with 3D printed plastics
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 53-62
doi	https://doi.org/10.52842/conf.caadria.2019.1.053
summary	The tailored flexibility project seeks to develop a construction system that combines flexible formwork with robotic 3D plastic printing resulting in novel approaches that expand the ranges of both techniques. Combining 3D printing and flexible formwork does not necessarily suggest a unified design space and the development depends on thorough interrogation and critical assessment of the physical intelligence that emerges between digital design, manufacturing processes and structural integrity. This paper describes the initial prototyping of compound material behaviour in formwork and concrete, following the implicit rationales revealed through iterations and variations of physical experimentation. Such iterative feedback from physical prototyping informs and facilitates a discussion of the relationship between the manufacturing process and the design tool: How does the ultimate function as concrete shuttering transform the 3D printing process and how does this transformation conversely affect the shuttering design? How does a hierarchy of involved processes emerge and which composite opportunities do the initial results suggest as a further development into a coherent construction system?
keywords	concrete; flexible formwork; 3D printing; robotic fabrication
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaadesigradi2019_176
id	ecaadesigradi2019_176
authors	Giantini, Guilherme, Negris de Souza, Larissa, Turczyn, Daniel and Celani, Gabriela
year	2019
title	Environmental Ceramics - Merging the digital and the physical in the design of a performance -based facade system
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 749-758
doi	https://doi.org/10.52842/conf.ecaade.2019.2.749
summary	Environmental comfort and space occupancy are essential considerations in architectural design process. Façade systems deeply impact both aspects but are usually standardized. However, performance-based facade systems tackle these issues through computational design to devise non-homogeneous elements. This work proposes a ceramic facade system designed according to a performance-based process grounded on environmental analysis and parametric design to allow adaptation and geometric variation according to specific building demands on environmental comfort and functionality. In this process, the Design Science Research method guided the exploration of both design and evaluation, bridging the gap between theory and practice. Positive facade environmental performance were found from digital and physical models assessment in terms of radiation, illuminance, dampness (with ventilation) and temperature. Computational processes minimized radiation inside the building while maximized illuminance. Their association influenced on operative temperature, which dropped according to local dampness and material absorption. Accordingly, this design process associates not only environmental comfort and functionality concepts but also adaptability, flexibility, mass customization, personal fabrication, additive manufacturing concepts, being an example architectural design changes in the 4th Industrial Revolution.
keywords	sustainable design; facade system; computational design; environmental analysis; evolutionary algorithm
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:51

_id	ecaadesigradi2019_149
id	ecaadesigradi2019_149
authors	Gonzalez-Quintial, Francisco and Martin-Pastor, Andres
year	2019
title	Convolutas - Developable strips and digital fabricated lightweight architecture
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 585-594
doi	https://doi.org/10.52842/conf.ecaade.2019.1.585
summary	The present research is mainly focused on the development of a system that would be able to offer the potentiality of constructing free-form surfaces by using developable surfaces. Through a deep revision of pre-computational traditional geometric systems based on the classical Descriptive Geometry, after a re-interpretation that design and algorithmic generation tools allow by using computers and digital fabrication hardware as testing ground, a geometric control process has been designed in order to offer the possibility of managing double-curvature complex forms and their adaptation by using developable surfaces. The focal point of this system is proving how developable surfaces are suitable to build architectonical elements at real scale.
keywords	Geometry; Developable Surfaces; Algorithmic Approach; Digital Fabrication
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:51

_id	ecaadesigradi2019_367
id	ecaadesigradi2019_367
authors	Goti, Kyriaki, Katz, Shir, Baharlou, Ehsan, Vasey, Lauren and Menges, Achim
year	2019
title	Jamming Formations - Intuitive design and fabrication process through human-computer interaction
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 669-680
doi	https://doi.org/10.52842/conf.ecaade.2019.1.669
summary	This paper examines the potential of User Interfaces (UI) and sensor feedback to develop an intuitive design and fabrication process utilizing granular jamming. By taking advantage of the variable stiffness of granular jamming over time, an adaptive fabrication process is presented in which various structures are formed from individual jammed components which can weave or interlock in an overall system. A User Interface (UI) is developed as a design tool which would enable interactive design decisions and operations, based on pre-designed formal and tectonic strategies. The project has four research trajectories that are developed in parallel: (1) material system research; (2) development of an ad hoc digital recording system; (3) creation of a computational library that stores users' iterations; and (4) development of a User Interface (UI) that enables users' interaction with the computational library.
keywords	Granular Jamming, Human-computer Interaction, Adaptive Fabrication
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:51

_id	caadria2019_643
id	caadria2019_643
authors	Hramyka, Alina, Grewal, Neil, Makki, Mohammed and Dillon, Brittney
year	2019
title	Intelligent Territory - A responsive cooling tower and shading system for arid environments
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 571-580
doi	https://doi.org/10.52842/conf.caadria.2019.2.571
summary	Climatic change coupled with desertification processes impacting cities located around the Mediterranean, has raised serious questions for the capability of the affected cities to adapt to the rapidly changing environmental conditions. This research aims to design small-scale tower structures and shading devices in Nicosia, Cyprus through employing environmental analyses within a generative design process to create an intelligent, adaptive system. Guided by Bernoulli's principles, geometrical design parameters acquired from fluid simulations, alongside solar analyses of the existing city fabric, were used to generate an evolutionary algorithm for design. The research develops a methodology to facilitate environmental flows in urban architectural systems, generating cooling processes in arid environments that facilitate the adaptation of cities to changes in climatic and environmental conditions.
keywords	CFD Simulation; Generative Design; Desertification; Passive cooling system
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	ecaade2024_4
id	ecaade2024_4
authors	Irodotou, Louiza; Gkatzogiannis, Stefanos; Phocas, Marios C.; Tryfonos, George; Christoforou, Eftychios G.
year	2024
title	Application of a Vertical Effective Crank–Slider Approach in Reconfigurable Buildings through Computer-Aided Algorithmic Modelling
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 421–430
doi	https://doi.org/10.52842/conf.ecaade.2024.1.421
summary	Elementary robotics mechanisms based on the effective crank–slider and four–bar kinematics methods have been applied in the past to develop architectural concepts of reconfigurable structures of planar rigid-bar linkages (Phocas et al., 2020; Phocas et al., 2019). The applications referred to planar structural systems interconnected in parallel to provide reconfigurable buildings with rectangular plan section. In enabling structural reconfigurability attributes within the spatial circular section buildings domain, a vertical setup of the basic crank–slider mechanism is proposed in the current paper. The kinematics mechanism is integrated on a column placed at the middle of an axisymmetric circular shaped spatial linkage structure. The definition of target case shapes of the structure is based on a series of numerical geometric analyses that consider certain architectural and construction criteria (i.e., number of structural members, length, system height, span, erectability etc.), as well as structural objectives (i.e., structural behavior improvement against predominant environmental actions) aiming to meet diverse operational requirements and lightweight construction. Computer-aided algorithmic modelling is used to analyze the system's kinematics, in order to provide a solid foundation and enable rapid adaptation for mechanisms that exhibit controlled reconfigurations. The analysis demonstrates the implementation of digital parametric design tools for the investigation of the kinematics of the system at a preliminary design stage, in avoiding thus time-demanding numerical analysis processes. The design process may further provide enhanced interdisciplinary performance-based design outcomes.
keywords	Reconfigurable Structures, Spatial Linkage Structures, Kinematics, Parametric Associative Design
series	eCAADe
email
last changed	2024/11/17 22:05

_id	ecaadesigradi2019_305
id	ecaadesigradi2019_305
authors	Kabošová, Lenka, Worre Foged, Isak, Kme, Stanislav and Katunský, Dušan
year	2019
title	Building envelope adapting from and to the wind flow
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 131-138
doi	https://doi.org/10.52842/conf.ecaade.2019.2.131
summary	The paper presents research for wind-responsive architecture. The main objective is the digital design methodology incorporating the dynamic, fluctuating wind flow into the shape-generating process of architectural envelopes. These computational studies are advanced and informed through physical prototyping models, allowing a hybrid method approach. The negative impacts of the wind at the building scale (wind loads), as well as urban scale (wind discomfort), can be avoided and even transformed into an advantage by incorporating the local wind conditions to the process of creating architectural envelopes with adaptive structures. The paper proposes a tensegrity-membrane system which, when exposed to the dynamic wind flow, enables a local passive shape adaptation. Thus, the action of the wind pressure transforms the shape of the building envelope to an unsmoothed, dimpled surface. As a consequence, the aerodynamic properties of the building are modified, which contributes to reducing wind suction and drag force. Moreover, the slight shape change materializes and articulates the immaterial wind phenomena. For a better understanding of the dynamic geometric properties, one unit of the wind-responsive envelope is tested through simulations, and through physical prototypes. The idea and material-geometric studies are subsequently applied in a specific case study, including a designed building envelope in an industrial silo cluster in Stockholm.
keywords	adaptive envelope; tensegrity; wind flow; digital designing; shape-change
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

_id	ijac201917204
id	ijac201917204
authors	Karaoglan Füsun Cemre and Sema Alaçam
year	2019
title	Design of a post-disaster shelter through soft computing
source	International Journal of Architectural Computing vol. 17 - no. 2, 185-205
summary	Temporary shelters become a more critical subject of architectural design as the increasing number of natural disasters taking place each year result in a larger number of people in need of urgent sheltering. Therefore, this project focuses on designing a temporary living space that can respond to the needs of different post-disaster scenarios and form a modular system through differentiation of units. When designing temporary shelters, it is a necessity to deal with the provision of materials, low-cost production and the time limit in the emergency as well as the needs of the users and the experiential quality of the space. Although computational approaches might lead to much more efficient and resilient design solutions, they have been utilized in very few examples. For that reason and due to their suitability to work with architectural design problems, soft computing methods shape the core of the methodology of the study. Initially, a digital model is generated through a set of rules that define a growth algorithm. Then, Multi-Objective Genetic Algorithms alter this growth algorithm while evaluating different configurations through the objective functions constructed within a Fuzzy Neural Tree. The struggle to represent design goals in the form of Fuzzy Neural Tree holds potential for the further use of it for architectural design problems centred on resilience. Resilience in this context is defined as a measure of how agile a design is when dealing with a major sheltering need in a post-disaster environment. Different from the previous studies, this article aims to focus on the design of a temporary shelter that can respond to different user types and disaster scenarios through mass customization, using Fuzzy Neural Tree as a novel approach. While serving as a temporary space, the design outcomes are expected to create a more neighbourhood-like pattern with a stronger sense of community for the users compared to the previous examples.
keywords	Humanitarian design, emergency architecture, computational design, Fuzzy Neural Tree, Multi-Objective Genetic Algorithms
series	journal
email
last changed	2019/08/07 14:04

_id	ecaadesigradi2019_138
id	ecaadesigradi2019_138
authors	Kim, Yujin
year	2019
title	Bioinspired Modularity in Evolutionary Computation and a Rule-Based Logic - Design Solutions for Shared Office Space
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 341-348
doi	https://doi.org/10.52842/conf.ecaade.2019.2.341
summary	Evolutionary computation is a population-based problem solver that is characterized by a stochastic optimization in order to solve both a single objective and multiple objectives. Previous evolutionary computational researches provided various design options and improved optimization through being evolved with fitness criteria, especially when multiple design objectives conflict with one another. In this paper, a rule-based algorithm was combined with the evolutionary computational process to propose an assembly logic of the modules and to improve an architectural building design in order to adapt to environmental changes. Two algorithms - a rule based and generative algorithm- proceeded simultaneously and provided various options as well as optimization in real time. For the experiment set-up, existing buildings were divided into each module; the modules were reinterpreted and reassembled with the logic driven by Evolutionary Developmental Biology. The conclusion is that when a rule based logic is combined with a developmental algorithm with a modular system, it is more efficient for the design process to be analyzed, evaluated, and optimized. The ultimate outcome provides various options in a short amount of time.
keywords	Evolutionary computation; rule-based algorithm; modularity; reassembly
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:52

For more results click below: