Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 619

Reformat results as: short short into frame detailed detailed into frame

_id	acadia19_338
id	acadia19_338
authors	Aviv, Dorit; Houchois, Nicholas; Meggers, Forrest
year	2019
title	Thermal Reality Capture
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 338-345
doi	https://doi.org/10.52842/conf.acadia.2019.338
summary	Architectural surfaces constantly emit radiant heat fluxes to their surroundings, a phenomenon that is wholly dependent on their geometry and material properties. Therefore, the capacity of 3D scanning techniques to capture the geometry of building surfaces should be extended to sense and capture the surfaces’ thermal behavior in real time. We present an innovative sensor, SMART (Spherical-Motion Average Radiant Temperature Sensor), which captures the thermal characteristics of the built environment by coupling laser geometry scanning with infrared surface temperature detection. Its novelty lies in the combination of the two sensor technologies into an analytical device for radiant temperature mapping. With a sensor-based dynamic thermal-surface model, it is possible to achieve representation and control over one of the major factors affecting human comfort. The results for a case-study of a 3D thermal scan conducted in the recently completed Lewis Center for the Arts at Princeton University are compared with simulation results based on a detailed BIM model of the same space.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	lasg_whitepapers_2019_089
id	lasg_whitepapers_2019_089
authors	Byrne, Daragh; and Dana Cupkova
year	2019
title	Towards Psychosomatic Architecture; Attuning Reactive Architectural Materials through Biofeedback
source	Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.089 - 100
summary	The built environment is known to affect human health and wellbeing. Yet, architecture does not respond to our bodies or our minds. It tends to be static, ignoring the human occupant, their mood, behaviors, and emotions. There is evidence that this monotony of average space is harmful to human health. Additionally, differences in gender, race and cultural conditions vary the perception of and preferences for temperature and color. To improve the psychosomatic relationship with architectural spaces, there arises the necessity for it to have a greater range of spatial reactivity and better support for personalized thermoregulation and aesthetics. This paper proposes an architecture that operates like a mood-ring, one that creates rich feedback between architecture and occupant towards individualized reactivity and expression. [Sentient Concrete] ([Image 1]) is a prototype of a thermochromically treated concrete panel that is thermally actuated by embedded electromechanical systems and can dynamically produce localized thermally reactive responses. It serves as a test case for outlining further research agendas and possible design frameworks for psychosomatic architecture.
keywords	living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed	2019/07/29 14:02

_id	caadria2019_396
id	caadria2019_396
authors	Cao, Rui, Fukuda, Tomohiro and Yabuki, Nobuyoshi
year	2019
title	Quantifying Visual Environment by Semantic Segmentation Using Deep Learning - A Prototype for Sky View Factor
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 623-632
doi	https://doi.org/10.52842/conf.caadria.2019.2.623
summary	Sky view factor (SVF) is the ratio of radiation received by a planar surface from the sky to that received from the entire hemispheric radiating environment, in the past 20 years, it was more applied to urban-climatic areas such as urban air temperature analysis. With the urbanization and the development of cities, SVF has been paid more and more attention on as the important parameter in urban construction and city planning area because of increasing building coverage ratio to promote urban forms and help creating a more comfortable and sustainable urban residential building environment to citizens. Therefore, efficient, low cost, high precision, easy to operate, rapid building-wide SVF estimation method is necessary. In the field of image processing, semantic segmentation based on deep learning have attracted considerable research attention. This study presents a new method to estimate the SVF of residential environment by constructing a deep learning network for segmenting the sky areas from 360-degree camera images. As the result of this research, an easy-to-operate estimation system for SVF based on high efficiency sky label mask images database was developed.
keywords	Visual environment; Sky view factor; Semantic segmentation; Deep learning; Landscape simulation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2019_447
id	caadria2019_447
authors	Cheng, Chi-Li and Hou, June-Hao
year	2019
title	Robotic Glass Crafting by Dip Forming
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 193-202
doi	https://doi.org/10.52842/conf.caadria.2019.1.193
summary	This research is to develop a robotic glass crafting dip-forming process by dip forming. Instead of employing molds, we utilize repetitive dip coating and gravity to shape the glass. In addition, its morphogenesis process is similar to the certain growth mechanisms in nature, such as geotropism and branching. During the forming process, melted glass is accumulated layer by layer gradually until the target geometry is completed. The process takes advantage of the precision of the industrial robotic arm and the viscosity property of the material. This process requires the custom-made tool to operate in high temperature and controlling the timing of heating and annealing to eliminate Z artifacts caused by layered deposition, achieving the crystal-clear effect of the glass craft without the post cure process after printing. In addition, the robotic arm provides a higher degree of freedom for forming. This research demonstrates glassworks in the organic form including variations in thickness and branching to test the proposed method.
keywords	robotic arm; glass craft; Digital Fabrication; additive manufacturing; dipping forming
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2019_002
id	cf2019_002
authors	De Luca, Francesco
year	2019
title	Environmental Performance-Driven Urban Design Parametric Design Method for the Integration of Daylight and Urban Comfort Analysis in Cold Climates
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 21
summary	Shape of built environment and image of cities are significantly influenced by environmental factors such as access to natural light, air temperature and wind. Adequate quantity of daylight in building interiors is important for occupant wellbeing and energy saving. In Estonia minimum quantity of daylight is required by building standards. Wind speed increased by urban environment at northern latitudes can significantly reduce pedestrian perceived temperature during winter inducing strong cold stress. This paper presents a method for the integration of parametric modeling and environmental simulations to analyze interiors and exteriors comfort of tower building cluster variations in different urban areas in Tallinn. Optimal pattern characteristics such as buildings distance and alignment favoring improvement of interiors daylight and decrease of pedestrian cold stress are presented and discussed.
keywords	Daylight, Urban Comfort, Environmental Analysis, PerformanceDriven Urban Design, Parametric Design
series	CAAD Futures
email
last changed	2019/07/29 14:08

_id	cf2019_038
id	cf2019_038
authors	El-Dabaa, Rana and Sherif Abdelmohsen
year	2019
title	HMTM: Hygromorphic-Thermobimetal Composites as a Novel Approach to Enhance Passive Actuation of Adaptive Façades
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 290-300
summary	Typical adaptive facades rely on mechanical actuators that respond to the outdoor climate and regulate its effect on indoor spaces. With the emergence of ubiquitous computing, several studies have independently utilized the latent properties of programmable materials, such as the hygroscopic properties of wood and the difference in expansion coefficient of metals, to passively program material response. Motion stimuli vary for each material however, involving changes in humidity and temperature fluctuation for wood and metals respectively. This paper introduces Hygromorphic-Thermobimetal (HMTM), as a low-tech low-cost passive programmable composite. A series of physical experiments are conducted to deduce design parameters that induce specific actuation mechanisms based on the stimulation of both hygroscopic properties in wood and metal expansion through temperature variation. This allows for an extended implementation of the hygroscopic properties of wood and its actuation configurations in hot arid climates, where variation in temperature, rather than humidity, is more dominant.
keywords	Hygroscopic properties of wood, Passive actuation, Thermobimetals, Programmable materials, Adaptive façades
series	CAAD Futures
email
last changed	2019/07/29 14:15

_id	caadria2019_080
id	caadria2019_080
authors	Green, Stephen, King, Geoff, Fabbri, Alessandra, Gardner, Nicole, Haeusler, M. Hank and Zavoleas, Yannis
year	2019
title	Designing Out Urban Heat Islands - Optimisation of footpath materials with different albedo value through evolutionary algorithms to address urban heat island effect
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 603-612
doi	https://doi.org/10.52842/conf.caadria.2019.2.603
summary	The Urban Heat Island (UHI) effect is pronounced in dense urban developments, and particular an issue in the case study city of Parramatta, where temperature increases are impacting use of public space, health, and economic productivity. To mitigate against elevated temperatures in built up areas, this research explores the optimisation of paving material layouts through using an evolutionary algorithm. High albedo (reflective) materials are objectively cooler than low albedo (absorbent) materials yet tend to be more expensive. To reduce the amount of heat absorbent pavement materials whilst keeping in mind material costs, a range of materials of different albedo levels (reflectivity) can be assigned on the same path using an evolutionary algorithm to optimise the coolest materials for the cheapest price. Over the course of this paper, this research aim will be approached using visual scripting software such as Grasshopper to simulate daylight analysis and to generate an optimisation algorithm. Previous research on the topics of UHI have revealed different methods for solving specific problems, all focusing on using software analysis to determine an informed decision on construction. The paper contributes via a computational approach of material selection to battle urban heat island effects.
keywords	urban heat island; albedo value; material properties; evolutionary algorithm ; landscape architecture
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2019_245
id	caadria2019_245
authors	Jiaxin, Zhang, Yunqin, Li, Haiqing, Li and Xueqiang, Wang
year	2019
title	Sensitivity Analysis of Thermal Performance of Granary Building based on Machine Learning
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 665-674
doi	https://doi.org/10.52842/conf.caadria.2019.1.665
summary	The granary building form has significant effects on thermal performance, especially in hot climate regions. This research is focused on exploring the influences of parameters relevant to building form design on thermal performance for granary buildings in Jiangsu and Anhui, China(both provinces belong to the hot summer region). The usual method is to use simulation software to perform a sensitivity analysis of thermal performance to assess the impacts of granary design parameters and identify the essential characteristics. However, many factors are affecting the thermal performance of granary buildings. The use of traditional energy simulation software requires calculation and analysis of a large number of models. In this study, we build a machine learning model to predict the thermal performance of granary buildings and identify the most influential design parameters of thermal performance in granary building. The input parameters include outdoor temperature, building height, aspect ratio, orientation, heat transmission coefficient of the wall and roof, and overall scale. The results show that the overall building scale is the most influential variable to the annual electricity consumption for cooling, whereas the heat transmission coefficient of the roof is the most influential to the change of the indoor temperature.
keywords	Sensitivity analysis; Artificial Neural Networks (ANNs); Thermal performance; Granary building
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia19_332
id	acadia19_332
authors	Koerner, Andreas
year	2019
title	Thermochromic Articulations
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 332- 337
doi	https://doi.org/10.52842/conf.acadia.2019.332
summary	The ongoing research presented in this paper lies on the threshold between computational design and digital fabrication with a strong focus on emergent techniques for environmental design. The main hypothesis is, that with an increasing granularity of thermal comfort - observing a trend towards more heterogeneous indoor microclimates – new design challenges arise. Architectural fabrics will be required to communicate indoor climate conditions to the inhabitants, to maintain high levels of thermal comfort locally but specifically. This research investigates a novel generative design methodology, which links computational fluid dynamics simulations, robotic fabrication and material-inert performances. The resulting environmentally active panels respond to climatic conditions and by this communicate parameters of thermal comfort, such as temperature, airflow, and humidity, to the inhabitants. This paper presents a digital design workflow, a prototype for a thermochromic panel, and speculates on potential development. Communicating invisible parameters of thermal comfort to users is a crucial requirement when designing large continuous indoor volumes, when blurring the dichotomous duality of inside and outside and when designing highly porous architecture.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	caadria2019_530
id	caadria2019_530
authors	Lu, Siliang, Wang, Shihan, Cochran Hameen, Erica, Shi, Jie and Zou, Yue
year	2019
title	Comfort-Based Integrative HVAC System with Non-Intrusive Sensing in Office Buildings
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 785-794
doi	https://doi.org/10.52842/conf.caadria.2019.1.785
summary	Heating, ventilation and air-conditioning system plays a key role in shaping the built environment. The effective and efficient HVAC operations not only achieve energy savings but also create a more comfortable environment for occupant indoors. Since current HVAC systems with fixed schedules cannot guarantee the operation with high energy efficiency and provision of comfortable thermal environment for occupants, it is of great importance to develop new paradigm of HVAC system framework, especially in the open-plan office environment so that everyone could work under their preferred thermal environment. Moreover, compared to environment-related factors to thermal comfort, sensing systems for occupant-related factors such as clothing insulation, metabolic rate, skin temperature have not had standardized yet and most of sensing systems for occupant-related factors may either result in privacy issue or are too intrusive. Hence, it is necessary to develop a new non-intrusive and less private sensing framework for monitoring individual thermal comfort in real-time. Therefore, this paper proposes an integrative comfort-based personalized cooling system with the operation of the centralized systems in office buildings. The results show that such integrative and interactive HVAC system for workplaces has advantages over thermal comfort improvements and energy savings.
keywords	Adaptive thermal comfort; Non-intrusive personalized cooling system; Occupant-responsive HVAC control; Intelligent workplace
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2019_345
id	caadria2019_345
authors	Marschall, Max and Burry, Jane
year	2019
title	Can the Use of Stochastic Models of Occupants' Environmental Control Behavior Influence Architectural Design Outcomes? - How field data can influence design outcomes
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 715-724
doi	https://doi.org/10.52842/conf.caadria.2019.1.715
summary	Thermal comfort research has shown that natural ventilation can reduce energy consumption while increasing comfort. However, giving occupants control over their environment introduces uncertainty into building performance which is challenging to emulate using current simulation techniques. Traditionally, window operation is modelled deterministically, for instance by assuming windows to be opened at a predefined temperature. Studies have shown this to be inaccurate, often causing large discrepancies between simulated and actual performance; instead, probabilistic models have emerged based on field study data. The literature on this topic is currently limited to building science and lacks an analysis of how these insights may affect architecture. In a design study, we used evolutionary computation to determine comfort-optimized housing designs for various climates, each time comparing the results of both window operation models. The resulting designs varied considerably; most notably, using the stochastic approach resulted in more shading elements, especially in warmer climates.
keywords	window operation model; stochastic; natural ventilation; thermal comfort; occupant behavior
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaadesigradi2019_183
id	ecaadesigradi2019_183
authors	Mughal, Humera and Beirao, Jose
year	2019
title	A Workflow for the Performance Based Design of Naturally Ventilated Tall Buildings Using a Genetic Algorithm (GA)
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 645-654
doi	https://doi.org/10.52842/conf.ecaade.2019.2.645
summary	Optimization of Natural Ventilation process in highrise buildings is one of the most complex and least addressed phenomenon in the field of sustainable architecture. This issue requires urgent consideration to reduce the computation time due to fast growing demand of vertical construction in metropolitan cities. Until recently most highrise buildings have been operated with mechanical systems, causing high energy loads in hot climates and have high carbon footprints. Highrise buildings with natural ventilation and sky gardens can address these problems. This study involves the development of a Genetic Algorithm (GA) addressing the multi objective optimization of natural ventilation in tall buildings incorporated with Sky-Gardens at different levels all connected through a central ventilation shaft. The fitness function for this GA is composed of three scales; temperature reduction due to evapotranspiration of plants of sky-gardens, optimum wind velocity for channelizing air inside the corridors and ventilation shaft, and optimum building configuration. The aim is to find the best solutions for tall buildings constructed in hot climate through the provision of optimized airflow paths suitable for the effectiveness of natural ventilation, within a reasonably short computation time for supporting design processes at early stage.
keywords	Optimization; Natural Ventilation; Tall buildings; Genetic Algorithms
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:59

_id	caadria2019_365
id	caadria2019_365
authors	Natephra, Worawan and Motamedi, Ali
year	2019
title	BIM-based Live Sensor Data Visualization using Virtual Reality for Monitoring Indoor Conditions
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 191-200
doi	https://doi.org/10.52842/conf.caadria.2019.2.191
summary	This paper proposes a method for an automated live sensor data visualization of building indoor environment conditions using a VR system. The proposed method is based on the integration of environmental sensors, BIM, and VR technology. Such integration provides an opportunity to utilize an immersive and live sensing technology for improving data visualization. In our case study, the environmental data, such as indoor air temperature, humidity, and light level are captured by sensors connected to Arduino microcontrollers. The data output of sensors obtained from Arduino units are stored onto the BIM model and transferred to the developed VR system. The developed system simultaneously visualizes numerical values of sensors' reading together with the virtual model of the building in a VR headset. The result of the case study showed that the developed system is capable of visualizing various indoor environmental information of the building with the VR technology. It can provide users with useful information to help monitoring indoor thermal comfort conditions of the building in real-time, while performing the walkthrough in the virtual environment.
keywords	Building Information Modeling (BIM); environmental sensor; thermal comfort; Virtual Reality (VR); Arduino; IoT
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaadesigradi2019_464
id	ecaadesigradi2019_464
authors	Santiago, Pedro
year	2019
title	Evolutionary Optimization of Building Facade Form for Energy and Comfort in Urban Environment through BIM and Algorithmic Modeling - A case study in Porto, Portugal
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 153-160
doi	https://doi.org/10.52842/conf.ecaade.2019.2.153
summary	Consolidated urban areas usually present a challenge for the sustainable design decisions for the architect. The site, orientation and surrounding built environment compromise both passive and active systems, shortening the possible optimization measures available, leaving the designer with doubts as far as efficiency is concerned.BIM methodologies and visual programming languages have opened up a very wide range of design and analysis tools allowing the architect to make informed decisions based on data extracted from the models. Nonetheless it's optimization is through a slow process of trial and error, creating a significant limitation. This paper discusses the potentialities of the use of evolutionary algorithms to generate optimized solutions for facade solar orientation. A comparison between three different evolutionary algorithms aiming for solar radiation, inside average temperature allows to conclude the best result versus time consumed. Although under similar results the multi-objective EA represents the best compromise between time and final objective on the case study chosen for the paper. The interconnectivity in real time of BIM and algorithmic modeling softwares represents an advantage for time saving sustainable design decisions.
keywords	BIM; Evolutionary Optimization; Sustainable design
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	caadria2019_093
id	caadria2019_093
authors	Shahsavari, Fatemeh, Koosha, Rasool and Yan, Wei
year	2019
title	Uncertainty and Sensitivity Analysis Using Building Information Modeling - (An Energy Analysis Test Case)
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 615-624
doi	https://doi.org/10.52842/conf.caadria.2019.1.615
summary	Building design decision-making is associated with uncertainties due to variations over time and unpredictable parameters. There is a growing demand for probabilistic methods, i.e., uncertainty and sensitivity analyses to handle the uncertainties in building design. This research intends to encourage the application of Building Information Modeling (BIM) for addressing design uncertainties affecting building energy performance. The mapping between BIM (Revit and Dynamo) and a customized model-based energy analysis tool in Excel is investigated to translate architectural models to energy models and conduct the probabilistic analyses. The application of this method is demonstrated with a test case of a hypothetical residential unit in College Station, Texas, USA. Input variables in this example are the thermal properties of building elements, and the two simulation outputs are annual heating and cooling energy consumption, and deviation from comfort temperature. The results indicate the probability distribution of simulation outputs and the importance factor of each design input. This method deals with uncertainties and provides a more reliable and robust basis for design decision-making.
keywords	building design decision-making ; Building Information Modeling (BIM); Parametric design; Uncertainty and sensitivity analysis; Building performance analysis
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_024
id	ecaadesigradi2019_024
authors	Wit, Andrew John and Ng, Rashida
year	2019
title	cloudMAGNET - A prototype for climatically active light-weight skins
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 627-636
doi	https://doi.org/10.52842/conf.ecaade.2019.2.627
summary	This paper describes a potential for the integration of micro-encapsulated phase change material (mircoPCM) into lightweight skins as a means of regulating internal climatic conditions of volumetric objects. Viewed through the lens of the recently completed series of quarter-scale cloudMAGNET prototypes tested in the cloud forests of Monteverde, Costa Rica, this research utilized a wound, flexible carbon fiber framework and a lightweight fabric skin coated with varying densities of microPCM. The prototypes were monitored using real-time collection of climate data throughout the testing. In this paper we will demonstrate how climatic variables such as temperature, humidity, and pressure can be passively manipulated by varying the form and energy storage properties of materials without the use of active mechanical systems. Produced to bring awareness to the rising cloud levels within the Monteverde cloud forest, this research is intended to explore the fundamental relationships of material, energy and form. Beyond these objectives, the paper will also illustrate how these methods can be more broadly applied to the development of thermal-regulating lightweight tensile structures. Such innovations could be utilized as a method for the reimagining the architectural design and production processes allowing for the emergence of new typologies of environmentally self-mediating architecture.
keywords	material performance; phase change material; carbon fiber reinforced polymers; computation
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:57

_id	cdrf2021_286
id	cdrf2021_286
authors	Yimeng Wei, Areti Markopoulou, Yuanshuang Zhu,Eduardo Chamorro Martin, and Nikol Kirova
year	2021
title	Additive Manufacture of Cellulose Based Bio-Material on Architectural Scale
source	Proceedings of the 2021 DigitalFUTURES The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021)
doi	https://doi.org/https://doi.org/10.1007/978-981-16-5983-6_27
summary	There are severe environmental and ecological issues once we evaluate the architecture industry with LCA (Life Cycle Assessment), such as emission of CO2 caused by necessary high temperature for producing cement and significant amounts of Construction Demolition Waste (CDW) in deteriorated and obsolete buildings. One of the ways to solve these problems is Bio-Material. CELLULOSE and CHITON is the 1st and 2nd abundant substance in nature (Duro-Royo, J.: Aguahoja_ProgrammableWater-based Biocomposites for Digital Design and Fabrication across Scales. MIT, pp. 1–3 (2019)), which means significantly potential for architectural dimension production. Meanwhile, renewability and biodegradability make it more conducive to the current problem of construction pollution. The purpose of this study is to explore Cellulose Based Biomaterial and bring it into architectural scale additive manufacture that engages with performance in the material development, with respect to time of solidification and control of shrinkage, as well as offering mechanical strength. At present, the experiments have proved the possibility of developing a cellulose-chitosan- based composite into 3D-Printing Construction Material (Sanandiya, N.D., Vijay, Y., Dimopoulou, M., Dritsas, S., Fernandez, J.G.: Large-scale additive manufacturing with bioinspired cellulosic materials. Sci. Rep. 8(1), 1–5 (2018)). Moreover, The research shows that the characteristics (Such as waterproof, bending, compression, tensile, transparency) of the composite can be enhanced by different additives (such as xanthan gum, paper fiber, flour), which means it can be customized into various architectural components based on Performance Directional Optimization. This solution has a positive effect on environmental impact reduction and is of great significance in putting the architectural construction industry into a more environment-friendly and smart state.
series	cdrf
email
last changed	2022/09/29 07:53

_id	ijac201917206
id	ijac201917206
authors	Ackerman, Aidan; Jonathan Cave, Chien-Yu Lin and Kyle Stillwell
year	2019
title	Computational modeling for climate change: Simulating and visualizing a resilient landscape architecture design approach
source	International Journal of Architectural Computing vol. 17 - no. 2, 125-147
summary	Coastlines are changing, wildfires are raging, cities are getting hotter, and spatial designers are charged with the task of designing to mitigate these unknowns. This research examines computational digital workflows to understand and alleviate the impacts of climate change on urban landscapes. The methodology includes two separate simulation and visualization workflows. The first workflow uses an animated particle fluid simulator in combination with geographic information systems data, Photoshop software, and three-dimensional modeling and animation software to simulate erosion and sedimentation patterns, coastal inundation, and sea level rise. The second workflow integrates building information modeling data, computational fluid dynamics simulators, and parameters from EnergyPlus and Landsat to produce typologies and strategies for mitigating urban heat island effects. The effectiveness of these workflows is demonstrated by inserting design prototypes into modeled environments to visualize their success or failure. The result of these efforts is a suite of workflows which have the potential to vastly improve the efficacy with which architects and landscape architects use existing data to address the urgency of climate change.
keywords	Modeling, simulation, environment, ecosystem, landscape, climate change, sea level rise, urban heat island
series	journal
email
last changed	2019/08/07 14:04

_id	artificial_intellicence2019_15
id	artificial_intellicence2019_15
authors	Antoine Picon
year	2020
title	What About Humans? Artificial Intelligence in Architecture
source	Architectural Intelligence Selected Papers from the 1st International Conference on Computational Design and Robotic Fabrication (CDRF 2019)
doi	https://doi.org/https://doi.org/10.1007/978-981-15-6568-7_2
summary	Artificial intelligence is about to reshape the architectural discipline. After discussing the relations between artificial intelligence and the broader question of automation in architecture, this article focuses on the future of the interaction between humans and intelligent machines. The way machines will understand architecture may be very different from the reading of humans. Since the Renaissance, the architectural discipline has defined itself as a conversation between different stakeholders, the designer, but also the clients and the artisans in charge of the realization of projects. How can this conversation be adapted to the rise of intelligent machines? Such a question is not only a matter of design effectiveness. It is inseparable from expressive and artistic issues. Just like the fascination of modernist architecture for industrialization was intimately linked to the quest for a new poetics of the discipline, our contemporary interest for artificial intelligence has to do with questions regarding the creative core of the architectural discipline.
series	Architectural Intelligence
email
last changed	2022/09/29 07:28

_id	caadria2019_143
id	caadria2019_143
authors	Kato, Yuri and Matsukawa, Shohei
year	2019
title	Development of Generating System for Architectural Color Icons Using Google Map Platform and Tensorflow-Segmentation
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 81-90
doi	https://doi.org/10.52842/conf.caadria.2019.2.081
summary	In this research, the goal is to develop a generating system for architectural color icons using Google Map Platform and Tensorflow-Segmentation. There has been no case of developing a system that allows users to visualize the color tendency of buildings as architectural color icons for each building element from images of various regions. It is considered meaningful to be able to create criteria for decision making in architecture and the urban design by developing a system to clarify the current state of the architectural colors. It will contribute a rise in the consciousness of landscape conservation and be essential for the design of architectures and public objects. This paper includes the explanation of development method, use experiments, and consideration of five problems among architectural color icons creation. It is assumed that the accuracy of the present system will be better as the technology improves.
keywords	Google street view; machine learning; image segmentation; color palette; color analysis
series	CAADRIA
email
last changed	2022/06/07 07:52

For more results click below: