Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	cf2019_052
id	cf2019_052
authors	Abdelmohsen, Sherif ;Passaint Massoud, Rana El-Dabaa, Aly Ibrahim and Tasbeh Mokbel
year	2019
title	The Effect of Hygroscopic Design Parameters on the Programmability of Laminated Wood Composites for Adaptive Façades
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, p. 435
summary	Typical adaptive façades respond to external conditions to enhance indoor spaces based on complex mechanical actuators and programmable functions. Hygroscopic embedded properties of wood, as low-cost low-tech programmable material, have been utilized to induce passive motion mechanisms. Wood as anisotropic material allows for different passive programmable motion configurations that relies on several hygroscopic design parameters. This paper explores the effect of these parameters on programmability of laminated wood composites through physical experiments in controlled humidity environment. The paper studies variety of laminated configurations involving different grain orientations, and their effect on maximum angle of deflection and its durability. Angle of deflection is measured using image analysis software that is used for continuous tracking of deflection in relation to time. Durability is studied as the number of complete programmable cycles that wood could withstand before reaching point of failure. Results revealed that samples with highest deflection angle have least programmability durability.
keywords	Wood, hygroscopic design, lamination, deflection, durability, adaptive façades
series	CAAD Futures
email
last changed	2019/07/29 14:18

_id	caadria2021_115
id	caadria2021_115
authors	Chen, Qin Chuan, Lakshmi Narasimhan, Vaishnavi and Lee, Hyunsoo
year	2021
title	The potential of IoT-based smart environment in reaction to COVID-19 pandemic
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 709-718
doi	https://doi.org/10.52842/conf.caadria.2021.2.709
summary	COVID-19 was first reported in late December 2019 and quickly become a global health crisis. In the COVID-19 pandemic context, the dense and open characteristics make the public spaces a potential virus transmission hotspot. Therefore, it is extremely critical to adopt a more advanced and effective method in public environments to slow down its spread until a vaccine is widely used. A smart environment in the form of IoT, also known as the architecture of IoT, consists of three layers: perception layer, network layer, and application layer. A smart environment allows data and activities that happen in this environment to be collected, processed, and shared in real-time through various sensors. It can be introduced for early detection, tracking, and monitoring of potential confirmed cases. The smart environment is considered one of the most promising approaches to face and tackle the current scenario. However, research focusing on the potential of IoT smart environment in reaction to COVID-19 is still meager. Therefore, this paper identifies the smart environments potential based on the concept of IoT architectures three layers and further discusses how IoT can be introduced in public spaces to help battle the pandemic.
keywords	Internet of Things; Smart environment; COVID-19
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia19_360
id	acadia19_360
authors	Dackiw, Jean-Nicolas Alois; Foltman, Andrzej; Garivani, Soroush; Kaseman, Keith; Sollazzo, Aldo
year	2019
title	Cyber-physical UAV Navigation and Operation
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 360-367
doi	https://doi.org/10.52842/conf.acadia.2019.360
summary	The purpose of this paper is to present a work in progress pertaining to drone pose estimation and flight calibration. This paper intends to underline the increasing importance of determining alternative path planning instruments through accurate localization for Unmanned Aerial Vehicles (UAVs) with the purpose of achieving complex flight operations for the emerging applications of autonomous robotics in surveying, design, fabrication, and on-site operations. This research is based on the implementation of novel technologies such as Augmented Reality (AR), Robot Operating System (ROS), and computational approaches to define a drone calibration methodology, leveraging existing methods for drone path planning. Drones are equipped with measurement systems to provide geo-location and time information such as onboard Global Positioning System (GPS) sensors, and Inertial Measurement Units (IMU). As stated in previous research, to increase navigation capabilities, measurements and data processing algorithms have a critical role (Daponte et al. 2015). The outcome of this work in progress showcases valuable results in calculating and assessing accurate positioning for UAVs, and developing data exchanges in transmission, reception, and tracking.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	acadia19_674
id	acadia19_674
authors	Farahi, Benhaz
year	2019
title	IRIDESCENCE: Bio-Inspired Emotive Matter
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp.674-683
doi	https://doi.org/10.52842/conf.acadia.2019.674
summary	The Hummingbird is an amazing creature. The male Anna’s Hummingbird changes color from dark green to iridescence pink in his spectacular courtship. Can we exploit this phenomenon to produce color and shape changing material systems for the future of design? This paper describes the design process behind the interactive installation, Iridescence, through the logic of two interconnected themes, ‘morphology’ and ‘behavior’. Inspired by the gorget of the Anna’s hummingbird, this 3D printed collar is equipped with a facial tracking camera and an array of 200 rotating quills. The custom-made actuators flip their colors and start to make patterns, in response to the movement of onlookers and their facial expressions. The paper addresses how wearables can become a vehicle for self-expression, capable of influencing social interaction and enhancing one’s sensory experience of the world. Through the lens of this project, the paper proposes ‘bio-inspired emotive matter’ as an interdisciplinary design approach at the intersection of Affective Computing, Artificial Intelligence and Ethology, which can be applied in many design fields. The paper argues that bio-inspired material systems should be used not just for formal or performative reasons, but also as an interface for human emotions to address psycho-social issues.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2019_406
id	caadria2019_406
authors	Fitriawijaya, Adam, Hsin-Hsuan, Tsai and Taysheng, jeng
year	2019
title	A Blockchain Approach to Supply Chain Management in a BIM-Enabled Environment
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 411-420
doi	https://doi.org/10.52842/conf.caadria.2019.2.411
summary	The blockchain is a distributed ledger managed by a peer to peer network that stores all transaction records. The distributed ledger technology offers new possibilities, promising to ensure that data is secure, decentralized and incomparable. In the Architecture, Engineering, Construction (AEC) industry, Building Information Modeling (BIM) has quickly become a standard platform where all parties work together on a single and shared model for collaboration. The issues of Supply Chain Management (SCM) within BIM can be identified in BIM maturity level, based on PAS1193 that developed through Common Data Environment (CDE). The research strategy is to make model and simulation of SCM using BIM and create CDE to become decentralized and integrate the blockchain technology. The smart contract system validates every material and configuration of components within the model from the design stage until the operation stage. Traceability and auditability through an immutable historic eventually be more visible and allow real-time tracking of a material to a construction site providing a history from the origin.
keywords	Blockchain; BIM; Supply Chain
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaadesigradi2019_471
id	ecaadesigradi2019_471
authors	Güzelci, Orkan Zeynel, Alaçam, Sema and Güzelci, Handan
year	2019
title	Trend Topics and Changing Concepts of Computational Design in the Last 16 Years - A content analysis
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 423-430
doi	https://doi.org/10.52842/conf.ecaade.2019.1.423
summary	This study argues that analysis of written content might be helpful to provide clues at a certain extent on the future directions of current research areas and the emergence of new study areas. In the scope of the study, the International Journal of Architectural Computing (IJAC) which has been a scientific platform covering many pioneer publications on education research in computer-aided architectural design (CAAD) field was selected as source content. Although the size of the source domain is limited, the analysis of abstracts and titles of 439 articles published in IJAC between 2003 and 2018 revealed promising results which can be examined under four characteristics: "constant", "emerging", "fading" and "solidifying" concepts. The tokens in the analysis process are words, phrases, topic nodes and links between topic nodes. The outcomes of this study might contribute to tracking the evolution of concepts their emergence or disusage in different time and contexts, and interrelations between different concepts.
keywords	content analysis; computational design concepts; IJAC
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:49

_id	acadia20_142p
id	acadia20_142p
authors	Kilian, Axel
year	2020
title	The Flexing Room
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 142-147
summary	Robotics has been largely confined to the object category with fewer examples at the scale of buildings. Robotic buildings present unique challenges in communicating intent to the enclosed user. Precedent work in architectural robotics explored the performative dimension, the playful and interactive qualities, and the cognitive challenges of AI systems interacting with people in architecture. The Flexing Room robotic skeleton was installed at MIT at its full designed height for the first time and tested for two weeks in the summer of 2019. The approximately 13-foot-tall structure is comprised of 36 pneumatic actuators and an active bend fiberglass structure. The full height allowed for a wide range of postures the structure could take. Acoustic monitoring through Piezo pickup mics was added that allowed for basic rhythmic responses of the structure to people tapping or otherwise triggering the vibration sensors. Data streams were collected synchronously from Kinect skeleton tracking, piezo pickup mics, camera streams, and posture data. The emphasis in this test period was first to establish reliable hardware operations at full scale and second to record correlated data streams of the sensors installed in the structure together with the actuation triggers and the human poses of the inhabitant. The full-scale installation of hardware was successful and proved the feasibility of the structural and actuation approach previously tested on a one-level setup. The range of postures was increased and more transparent for the occupant. The perception of the structure as space was also improved as the system reached regular ceiling height and formed a clearer architectural scale enclosure. The ambition of communicating through architectural postures has not been achieved yet, but promising directions emerged from the test and data collection
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	ecaadesigradi2019_051
id	ecaadesigradi2019_051
authors	Stojanovic, Vladeta, Trapp, Matthias, Richter, Rico, Hagedorn, Benjamin and Döllner, Jürgen
year	2019
title	Semantic Enrichment of Indoor Point Clouds - An Overview of Progress towards Digital Twinning
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 809-818
doi	https://doi.org/10.52842/conf.ecaade.2019.2.809
summary	This paper presents an approach towards the development of a service-oriented platform for semantic enrichment of indoor point clouds. It mainly focuses on integrated methods for the capture of as-is 3D point clouds using commodity mobile hardware, classification of point cloud clusters using a multiview-based method, geometric reconstruction of room boundaries, interactive 3D visualization, sensor data visualization, and tracking of spatial changes and user annotations via a secure ledger. Implementing the methods in a prototypical web-based application, we demonstrate our approach for the semantic enrichment of indoor point clouds and the generation of base data for Digital Twin representation.
keywords	Digital Twin; Indoor Point Cloud; Semantic Enrichment; Real Estate 4.0
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_168
id	ecaadesigradi2019_168
authors	Varinlioglu, Guzden and Halici, Suheyla Muge
year	2019
title	Gamification of Heritage through Augmented Reality
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 513-518
doi	https://doi.org/10.52842/conf.ecaade.2019.1.513
summary	This paper focuses on a game on architectural heritage, possibilities for using gamification for conveying information through the reanimation of an ancient city. It proposes an immersive AR game involving the portrayal of cultural heritage through mobile devices. The game includes an AR application for Android devices which enabled rendering of 3D content in combination with camera input. This application is an independent game, tracking targets through GPS on a larger scale and using object recognition on a smaller scale. Our research aims to propose implementing game mechanics on an AR system at an archaeological site in order to increase visitors' interest, and promote the dissemination of cultural heritage.
keywords	digital heritage; model-based tracking; augmented reality; gamification; public archaeology
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:58

_id	caadria2019_428
id	caadria2019_428
authors	Wang, Brandon, Moleta, Tane Jacob and Schnabel, Marc Aurel
year	2019
title	The New Mirror - Reflecting on inhabitant behaviour in VR and VR visualisations
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 535-544
doi	https://doi.org/10.52842/conf.caadria.2019.1.535
summary	Technology inevitably evolves and develops rapidly in the modern era, industries and professions continue to strive in integrating, adapting and utilising these advancements to improve, optimise and improve the process of design to manufacture to the user experience. One such system that fits into this category is the advent of Virtual Reality and Augmented Reality. The numerous possibilities to which these visually and spatially immersive systems opportunities for immense innovation often lacks direction or an ultimate goal thus rendering this piece of software to often be little more than a visualisation tool.This paper recognises the unique position that VR allows and seeks to interrogate and deconstruct current, traditional design processes to better utilise VR in aiding and reinforcing the idea of partial testing of ideas and concepts throughout the design cycle. Different sciences such as psychology, processes and automation from computational design and considerations within software development will be employed and injected into the broader architectural context in which this research presides. In addition to the VR headset, eye tracking external hardware are integrated to develop a seamless tool and workflow that allows us, as designers to better interrogate clients behaviour within our designed digital representations which leads to validations, evaluations and criticisms of our actions within the architectural realm.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2019_666
id	caadria2019_666
authors	Yang, Lijing, Cheng, Bingyu, Deng, Nachuan, Zhou, Zhi and Huang, Weixin
year	2019
title	The Influence of Supermarket Spatial Layout on Shopping Behavior and Product Sales - An application of the Ultra-wideband Indoor Positioning System
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 301-310
doi	https://doi.org/10.52842/conf.caadria.2019.1.301
summary	Companies and researchers had explored many methods to record people's shopping behavior, in order to explore a more favorable spatial layout. However, few research has been done from the architectural perspective using fine data. This research aims to set forth a clear relationship between the layout of the shelves and shopping behavior, as well as product sales, thus achieving a balance between customers shopping experience improvement and supermarket sales promotion. To achieve the goal, we designed experiments to track the shopping trajectory of many shoppers and set up questionnaires to get their personal and shopping information. Regarding the equipment for tracking the trajectory, we adopted the Ultra-Wideband indoor positioning system, which provides high positioning accuracy and stable performance. Based on the location data, we found spaces that appealed to shoppers and spaces where shoppers stayed longer. In addition, by comparing with the products they ultimately purchased, we found that buying behavior are highly related with the shoppers' movements in the supermarket. Based on the existing analysis, we assume that the spatial layout of the supermarket will affect people's impulse purchasing behavior. The UWB approach turns out to be feasible and can be applied to other supermarket behavior studies.
keywords	Shopping behavior; Ultra-Wideband; Supermarket layout; Trajectory; Quantitative Analysis
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2019_385
id	caadria2019_385
authors	Zarzycki, Andrzej
year	2019
title	Enhanced Building Services - Smart fixture case studies
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 2, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 201-210
doi	https://doi.org/10.52842/conf.caadria.2019.2.201
summary	This paper reviews strategies for embedded systems for product development and research prototyping. It focuses on the open-source and open-access technologies that can be applied into wiring smart cities, smart buildings, and smart building components. The paper contextualizes this discussion through two smart product case studies deploying microcontrollers and Raspberry Pi with Node-RED and publish-subscribe messaging services. The value of these case studies lies in identifying approaches for enhancing user-focused building services and in demonstrating new qualitative characteristics these services would provide. The studies presented here exemplify effective research pipelines into embedded technologies and smart building systems.
keywords	Smart devices; Internet of Things; User tracking; Embedded systems; Smart buildings
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia19_168
id	acadia19_168
authors	Adilenidou, Yota; Ahmed, Zeeshan Yunus; Freek, Bos; Colletti, Marjan
year	2019
title	Unprintable Forms
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp.168-177
doi	https://doi.org/10.52842/conf.acadia.2019.168
summary	This paper presents a 3D Concrete Printing (3DCP) experiment at the full scale of virtualarchitectural bodies developed through a computational technique based on the use of Cellular Automata (CA). The theoretical concept behind this technique is the decoding of errors in form generation and the invention of a process that would recreate the errors as a response to optimization (Adilenidou 2015). The generative design process established a family of structural and formal elements whose proliferation is guided through sets of differential grids (multi-grids) leading to the build-up of large span structures and edifices, for example, a cathedral. This tooling system is capable of producing, with specific inputs, a large number of outcomes in different scales. However, the resulting virtual surfaces could be considered as "unprintable" either due to their need of extra support or due to the presence of many cavities in the surface topology. The above characteristics could be categorized as errors, malfunctions, or undesired details in the geometry of a form that would need to be eliminated to prepare it for printing. This research project attempts to transform these "fabrication imprecisions" through new 3DCP techniques into factors of robustness of the resulting structure. The process includes the elimination of the detail / "errors" of the surface and their later reinsertion as structural folds that would strengthen the assembly. Through this process, the tangible outputs achieved fulfill design and functional requirements without compromising their structural integrity due to the manufacturing constraints.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_182
id	ecaadesigradi2019_182
authors	Argin, Gorsev, Pak, Burak and Turkoglu, Handan
year	2019
title	Post-flâneur in Public Space - Altering walking behaviour in the era of smartphones
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 649-658
doi	https://doi.org/10.52842/conf.ecaade.2019.1.649
summary	Smartphones have become an ordinary accompanier of our walks and created new modes of appropriation of public space. This study aims to research these modes by observing the altering visual attention and walking behavior of people using smartphones in public space, and in this way, to reveal the emergence of different types of post-flâneurs. In order to address these aims, 346 (195 females, 151 males) smartphone users were observed in a central public square in Ghent, Belgium for seven days in 10-minute time intervals. Each person's gender, age, number of accompanies and their dominant mode of smartphone usage(s) were identified. Afterward, each person's walking timeline was organized into seconds and coded according to their focus of visual attention in 24 different modes which grouped under the three gaze types; visual attention on the environment, on the environment through the smartphone screen, and on the smartphone screen. Results of the descriptive statistics, multivariate graph, and rhythm-based in-depth analysis show that different types of smartphone activities affect visual attention and speed differently. Different types of post-flâneurs such as navigators and photo takers were identified based upon their high percentage of visual attention on the environment and slower walking speed. The study also revealed the frequent presence of phone-walkers (who walk while only holding the smartphone) and smartphone zombies (who walk slowly and without attention to their surrounding) in public space. In addition to these, our research revealed rapid smartphone zombies who walk faster than the average walking speed, a finding contrary to the former studies reviewed.
keywords	visual attention; public space; smartphone; walking behaviour; post-flâneur
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	ecaadesigradi2019_290
id	ecaadesigradi2019_290
authors	Assem, Ayman, Abdelmohsen, Sherif and Ezzeldin, Mohamed
year	2019
title	A Fuzzy-Based Approach for Evaluating Existing Spatial Layout Configurations
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 2, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 35-44
doi	https://doi.org/10.52842/conf.ecaade.2019.2.035
summary	This paper proposes a fuzzy-based approach for the automated evaluation of spatial layout configurations. Our objective is to evaluate soft and interdependent design qualities (such as connectedness, enclosure, spaciousness, continuity, adjacency, etc.), to satisfy multiple and mutually inclusive criteria, and to account for all potential and logical solutions without discarding preferable, likely or even less likely possible solutions. Using fuzzyTECH, a fuzzy logic software development tool, we devise all possible spatial relation inputs affecting physical and non-physical outputs for a given space using descriptive rule blocks. We implement this fuzzy logic system on an existing residential space to evaluate different layout alternatives. We define all linguistic input variables, output variables, and fuzzy sets, and present space-space relations using membership functions. We use the resulting database of fuzzy agents to evaluate the design of the existing residential spaces.
keywords	Fuzzy logic; Space layout planning; Heuristic methods
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:54

_id	acadia19_208
id	acadia19_208
authors	Baghi, Ali; Baghi, Aryan; Kalantari, Saleh
year	2019
title	FLEXI-NODE
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 207-218
doi	https://doi.org/10.52842/conf.acadia.2019.207
summary	This paper is part of an ongoing research project on flexible molds for use in concrete fabrication. It continues and advances the concept of adjustable molds by creating a flexible system to produce a variety of concrete grid-joints. This reusable and adaptive mold streamlines the process of fabricating inherently diverse nodal joints without the need for cost-intensive mass-customization methods. The paper also proposes a novel way to cope with some of the significant drawbacks of similar mold techniques that have been explored and found wanting in similar projects. The technique used for the mold in the current research is inspired by a flexible mechanism that has been implemented in other manufacturing contexts, such as expansion joints and bendable straws. The outcomes of the project are a platform called “Flexi-node” and relevant software components that allow users to computationally design and fabricate a great variety of concrete joints for grid structures, using just one mold, with minimum material waste and no distortion from hydrostatic pressure.
keywords	flexible molds, nodal joints, computational design, concrete fabrication, mass customization, grid structures
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cf2019_020
id	cf2019_020
authors	Belém, Catarina; Luís Santos and António Leitão
year	2019
title	On the Impact of Machine Learning: Architecture without Architects?
source	Ji-Hyun Lee (Eds.) "Hello, Culture!" [18th International Conference, CAAD Futures 2019, Proceedings / ISBN 978-89-89453-05-5] Daejeon, Korea, pp. 148-167
summary	Architecture has always followed and adopted technological breakthroughs of other areas. As a case in point, in the last decades, the field of computation changed the face of architectural practice. Considering the recent breakthroughs of Machine Learning (ML), it is expectable to see architecture adopting ML-based approaches. However, it is not yet clear how much this adoption will change the architectural practice and in order to forecast this change it is necessary to understand the foundations of ML and its impact in other fields of human activity. This paper discusses important ML techniques and areas where they were successfully applied. Based on those examples, this paper forecast hypothetical uses of ML in the realm of building design. In particular, we examine ML approaches in conceptualization, algorithmization, modeling, and optimization tasks. In the end, we conjecture potential applications of such approaches, suggest future lines of research, and speculate on the future face of the architectural profession.
keywords	Machine Learning, Algorithmic Design, AI for Building Design
series	CAAD Futures
type	normal paper
email
last changed	2019/07/29 14:54

_id	acadia19_564
id	acadia19_564
authors	Chai, Hua; Marino, Dario; So, ChunPong; Yuan, Philip F.
year	2019
title	Design for Mass-Customization
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 564-572
doi	https://doi.org/10.52842/conf.acadia.2019.564
summary	Tradition wood tectonics, like interlocking joints, have regained focus against the background of digital design and fabrication technologies. While research on interlocking joints is quite focused on joint geometries, especially for timber plates, there has been less attention on the design and mass customization of interlocking joints for linear timber elements. In this context, this research addresses the challenges of mass customization of interlocking joints for linear elements through the design and realization of a 9-meterhigh timber structure with fully interlocking joints, without the use of any nails or glue. A customized code generation program was developed for the fabrication process, allowing the rapid programming and fabrication for all the 840 elements and 2592 notches. The project demonstrates how innovative structures are allowed through the synthesis of joint geometry, assembly process, and cutting-edge fabrication technology.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2019_447
id	caadria2019_447
authors	Cheng, Chi-Li and Hou, June-Hao
year	2019
title	Robotic Glass Crafting by Dip Forming
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 193-202
doi	https://doi.org/10.52842/conf.caadria.2019.1.193
summary	This research is to develop a robotic glass crafting dip-forming process by dip forming. Instead of employing molds, we utilize repetitive dip coating and gravity to shape the glass. In addition, its morphogenesis process is similar to the certain growth mechanisms in nature, such as geotropism and branching. During the forming process, melted glass is accumulated layer by layer gradually until the target geometry is completed. The process takes advantage of the precision of the industrial robotic arm and the viscosity property of the material. This process requires the custom-made tool to operate in high temperature and controlling the timing of heating and annealing to eliminate Z artifacts caused by layered deposition, achieving the crystal-clear effect of the glass craft without the post cure process after printing. In addition, the robotic arm provides a higher degree of freedom for forming. This research demonstrates glassworks in the organic form including variations in thickness and branching to test the proposed method.
keywords	robotic arm; glass craft; Digital Fabrication; additive manufacturing; dipping forming
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaadesigradi2019_561
id	ecaadesigradi2019_561
authors	Cress, Kevan and Beesley, Philip
year	2019
title	Architectural Design in Open-Source Software - Developing MeasureIt-ARCH, an Open Source tool to create Dimensioned and Annotated Architectural drawings within the Blender 3D creation suite.
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 621-630
doi	https://doi.org/10.52842/conf.ecaade.2019.1.621
summary	MeasureIt-ARCH is A GNU GPL licensed, dimension, annotation, and drawing tool for use in the open source software Blender. By providing free and open tools for the reading and editing of architectural drawings, MeasurIt-ARCH allows works of architecture to be shared, read, and modified by anyone. The digitization of architectural practice over the last 3 decades has brought with it a new set of inter-disciplinary discourses for the profession. An attempt to utilise 'Open-Source' methodologies, co-opted from the world of software development, in order to make high quality design more affordable, participatory and responsible has emerged. The most prominent of these discussions are embodied in Carlo Raitti and Mathew Claudel's manifesto 'Open-Source Architecture' (Ratti 2015) and affordable housing initiatives like the Wikihouse project (Parvin 2016). MeasurIt-ARCH aims to be the first step towards creating a completely Open-Source design pipeline, by augmenting Blender to a level where it can be used produce small scale architectural works without the need for any proprietary software, serving as an exploratory critique on the user experience and implementations of industry standard dimensioning tools that exist on the market today.
keywords	Blender; Open-Source; Computer Aided Design ; OSArc
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

For more results click below: