Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 650

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2020_432
id	ecaade2020_432
authors	Fragkia, Vasiliki and Worre Foged, Isak
year	2020
title	Methods for the Prediction and Specification of Functionally Graded Multi-Grain Responsive Timber Composites
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 585-594
doi	https://doi.org/10.52842/conf.ecaade.2020.2.585
summary	The paper presents design-integrated methods for high-resolution specification and prediction of functionally graded wood-based thermal responsive composites, using machine learning. The objective is the development of new circular design workflow, employing robotic fabrication, in order to predict fabrication files linked to material performance and design requirements, focused on application for intrinsic responsive and adaptive architectural surfaces. Through an experimental case study, the paper explores how machine learning can form a predictive design framework where low-resolution data can solve material systems at high resolution. The experimental computational and prototyping studies show that the presented image-based machine learning method can be adopted and adapted across various stages and scales of architectural design and fabrication. This in turn allows for a design-per-requirement approach that optimizes material distribution and promotes material economy.
keywords	material specification; responsive timber composites; machine learning; robotic fabrication; building envelopes
series	eCAADe
email
last changed	2022/06/07 07:50

_id	acadia20_150
id	acadia20_150
authors	Gaudilliere-Jami, Nadja
year	2020
title	AD Magazine
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 150-159.
doi	https://doi.org/10.52842/conf.acadia.2020.1.150
summary	This paper aims to contribute to a history of computational design and to a historiography of the field by proposing a study of the development of sociotechnical networks of computation in architecture between 1965 and 2020 as shown in AD magazine. The research focuses on two aspects: (1) a methodological approach for the constitution of a comprehensive history of the field and the application of that methodology to a corpus of items published in AD, and (2) questions the relevance of the outlook into computational design as given by the magazine in comparison to a more comprehensive history taking into account other sources. First, the paper presents the history and the editorial line of AD, as well as its pertinence as a primary source. Second, a brief account of the history emerging from this research is given, with a focus on four different periods: pioneering research of the 1960s–1970s, emergence of 3D modeling tools and the procedural winter in the 1980s–1990s, constitution of a large-scale academic and professional network in the 2000s, and democratization of algorithmic design tools in the 2010s. Third, observations are made on editorial choices of the magazine and the biases of its account of computational research, with a special focus on the period 2000–2020, during which many issues have been dedicated to computational design themes, therefore making potential biases more visible. Despite the preponderance of specific topics, editors, and contributors, AD magazine provides an outlook into key concerns of the community at given times. The main biases identified, including a strong focus on the themes of biodesign and rationalization of practices, mirror the biases of the computational field itself, demonstrating the value of AD as an archive for the history of the field.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	cdrf2019_297
id	cdrf2019_297
authors	H. Mohamed, D. W. Bao, and R. Snooks
year	2020
title	Super Composite: Carbon Fibre Infused 3D Printed Tectonics
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_28
summary	This research posits an innovative process of embedding carbon fibre as the primary structure within large-scale polymer 3D printed intricate architectural forms. The design and technical implications of this research are explored and demonstrated through two proto-architectural projects, Cloud Affects and Unclear Cloud, developed by the RMIT Architecture Snooks Research Lab. These projects are designed through a tectonic approach that we describe as a super composite – an approach that creates a compression of tectonics through algorithmic selforganisation and advanced manufacturing. Framed within a critical view of the lineage of polymer 3D printing and high tech fibres in the field of architectural design, the research outlines the limitations of existing robotic processes employed in contemporary carbon fibre fabrication. In response, the paper proposes an approach we describe asInfused Fibre Reinforced Plastic (IFRP) as a novel fabrication method for intricate geometries. This method involves 3D printing of sacrificial formwork conduits within the skin of complex architectural forms that are infused with continuous carbon fibre structural elements. Through detailed observation and critical review of Cloud Affects and Unclear Cloud (Fig. 2), the paper assesses innovations and challenges of this research in areas including printing, detailing, structural analysis and FEA modelling. The paper notes how these techniques have been refined through the iterative design of the two projects, including the development of fibre distribution mapping to optimise the structural performance.
series	cdrf
email
last changed	2022/09/29 07:51

_id	acadia20_372
id	acadia20_372
authors	Nelson, Cameron; Sabin, Jenny
year	2020
title	Shape-Programmed Self-Assembly of Bead Structures
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 372-381.
doi	https://doi.org/10.52842/conf.acadia.2020.1.372
summary	This paper demonstrates the potential of a robust, low-cost approach to programmable matter using beads and string to achieve complex shapes with novel self-organizing and deformational properties. The method is inspired by the observation that beads forced together along a string will become constrained until they spontaneously rigidify. This behavior is easily observed using any household string and flat-faced beads and recalls the mechanism behind classic crafts such as push puppets. However, specific examples of architectural applications are lacking. We analyze how this phenomenon occurs through static force analyses, physical tests, and simulation, using a rigid body physics engine to validate digital prototypes. We develop a method of designing custom bead geometries able to be produced via generic 3D-printing technology, as well as a computational path-planning toolkit for designing ways of threading beads together. We demonstrate how these custom bead geometries and threading paths influence the acquired structure and its assembly. Finally, we propose a means of scaling up this phenomenon, suggesting potential applications in deployable architecture, mortarless assembly of nonfunicular masonry, and responsive architectural systems.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2020_436
id	caadria2020_436
authors	Teng, Teng and Sabin, Jenny
year	2020
title	PICA - A Designer Oriented Low-Cost Personal Robotic Fabrication Platform for Sketch Level Prototyping
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 473-483
doi	https://doi.org/10.52842/conf.caadria.2020.2.473
summary	As digital design and fabrication are becoming increasingly prevalent, it is essential to consider how these technologies can be made more affordable and intuitively introduced to individual designers with limited computing skills. In this paper, we present an affordable personal robotic fabrication platform, PICA, consisting of a 3D printed robotic arm with a set of controller programs. The platform allows designers with limited computational design skills to assemble motors and 3D printed parts easily and to operate it in a code-free environment with direct manipulation through 3D modeling software. With the real-time communication between 3D modeling software and this robotic fabrication platform, PICA also allows designers to efficiently change the topological properties of geometry during the fabrication process. Based on a comparative observation of several application scenarios of using PICA among two groups of architecture students, the research can be summarized as follows: 1.) The project has proved to be an affordable approach to ease the materializing process when converting a designer's initial intent from digital space to a physical prototype. 2.) Designers could be facilitated by utilizing this robotic fabrication platform, especially during the period of conceptual design.
keywords	Robotic Fabrication; Design and Fabrication; Tool Development; Designer Oriented ; Ubiquitous Manufacturing
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	acadia20_188
id	acadia20_188
authors	Tian, Runjia; Wang, Yujie; Yüce Gün, Onur
year	2020
title	Data-Driven Midsole
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 188-197.
doi	https://doi.org/10.52842/conf.acadia.2020.2.188
summary	With the advancement of additive manufacturing, computational approaches are gaining popularity in midsole design. We develop an experimental understanding of the midsole as a field and develop designs that are informed by running data. We streamline two data types, namely underfoot pressure and surface deformation, to generate designs. Unlike typical approaches in which certain types of lattices get distributed across the midsole according to average pressure data, we use ARAMIS data, reflecting the distinct surface deformation characteristics, as our primary design driver. We analyze both pressure and deformation data temporally, and temporal data patterns help us generate and explore a design space to search for optimal designs. First, we define multiple zones across the midsole space using ARAMIS data clustering. Then we develop ways to blend and distribute auxetic and isosurface lattices across the midsole. We hybridize these two structures and blend data-determined zones to enhance visual continuity while applying FEA simulations to ensure structural integrity. This multi-objective optimization approach helps enhance the midsole’s structural performance and visual coherence while introducing a novel approach to 3D-printed footwear design.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	sigradi2020_600
id	sigradi2020_600
authors	Vazquez, Elena; Gursoy, Benay
year	2020
title	3D Printed Responsive Wood Interfaces: Shape-Changing Origami-Inspired Prototypes
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 600-607
summary	In this paper, we present a study for a 3D printed responsive wood interface in which we employed a scientific approach to assess the effects of various 3D printing parameters on shape-change. A full factorial design of experiments is conducted to determine the variables that maximize hygromorphic response. Analyzing the results of the experiments, we designed and fabricated origami-inspired prototypes, and tested their bimorph and gradient actuation. The contribution of this study to the growing body of literature on 3D printing responsive wood- based composites is the integration of gradient actuation and origami-inspired shape-changing strategies.
keywords	Shape-change, Shape-changing materials, Material computation, 3D printed wood, Responsive architecture
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	caadria2020_281
id	caadria2020_281
authors	Abdelmohsen, Sherif and Hassab, Ahmed
year	2020
title	A Computational Approach for the Mass Customization of Materially Informed Double Curved A Computational Approach for the Mass Customization of Materially Informed Double Curved Façade Panels
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 163-172
doi	https://doi.org/10.52842/conf.caadria.2020.1.163
summary	Despite recent approaches to enable the mass customization of double curved faÃ§ade panels, there still exist challenges including waste reduction, accuracy, surface continuity, economic feasibility, and workflow disintegration. This paper proposes a computational approach for the design and fabrication of materially informed double curved faÃ§ade panels with complex geometry. This approach proposes an optimized workflow to generate customizable double curved panels with complex geometry and different material properties, and optimize fabrication workflow for waste reduction. This workflow is applied to four different fabrication techniques: (1) vacuum forming, (2) clay extrusion, (3) sectioning, and (4) tessellation. Four experiments are introduced to apply surface rationalization and optimization using Rhino and Grasshopper scripting. Upon simulating each of the four design-to-fabrication techniques through different iterations, the experiment results demonstrated how the proposed workflows produced optimized surfaces with higher levels of accuracy and reduced waste material, customized per type of material and surface complexity.
keywords	Digital fabrication; Double curved facades; Mass customization; Design-to-fabrication
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2020_484
id	ecaade2020_484
authors	Aguilar, Pavel, Borunda, Luis and Pardal, Cristina
year	2020
title	Additive Manufacturing of Variable-Density Ceramics, Photocatalytic and Filtering Slats
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 97-106
doi	https://doi.org/10.52842/conf.ecaade.2020.1.097
summary	Additive Manufacturing (AM) offers the potential development of novel architectural applications of ceramic building components that can be engineered at the level of material to the extent of designing its performance and properties by density variations. This research presents a computational method and fabrication technique emulating complex material behavior via AM of intricate geometries and presents components with photocatalytic and climatic properties. It proposes an innovative application of AM of ceramic components in architecture to explore potential bioclimatic and antipollution performative use. Lattices are defined and manufactured with density variation gradients by tracing rectilinear clay deposition toolpaths that induce porosity intended for fluid filtering and to maximize sun exposure. The design method for photocatalytic, particle filtration and evaporative cooling local characterization introduced by complex patterning elements in architectural envelope slat components processed with radiation analysis influenced design are validated by simulation and experimental testing on specimens manufactured by paste extrusion.
keywords	Ceramic 3D Printing; Paste Extrusion; Photocatalytic Filter; Performative Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia20_108p
id	acadia20_108p
authors	Akbarzadeh, Masoud; Ghomi, Ali Tabatabaie; Bolhassani, Mohammad; Akbari, Mostafa; Seyedahmadian, Alireza; Papalexiou, Konstantinos
year	2020
title	Saltatur
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 108-113.
summary	The Saltatur (Dancer in Latin) demonstrates innovative research in the design and fabrication of a prefab structure consisting of spatial concrete nodes assembled in a compression-only configuration. The compression-only body is kept in equilibrium using the post-tensioning steel rods at the top and the bottom of the structure, supporting an ultra-thin glass structure on its top. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allows locking each member in its exact location in the body, obviating the need for a particular assembly sequence. A bespoke steel connection transfers the tensile forces between the concrete members effectively. Achieving a high level of efficiency in utilizing concrete for spatial systems requires a robust and powerful structural design and fabrication approach that has been meticulously exhibited in this project. The structural form of the project was developed using a three-dimensional geometry-based structural design method known as 3D Graphic Statics with precise control over the magnitude of the lateral forces in the system. The entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports. This particular internal distribution of forces in the form of the compression-only body reduces the bending moment in the system and, therefore, the required mass to span such a distance.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	acadia20_456
id	acadia20_456
authors	Alali, Jiries; Negar Kalantar, Dr.; Borhani, Alireza
year	2020
title	Casting on a Dump
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 456-463.
doi	https://doi.org/10.52842/conf.acadia.2020.1.456
summary	“Casting on a dump” focuses on finding accessible, low-tech fabrication methodologies that allow for the construction of parametrically designed nonstandard modular cast panels. Such an approach adopts a computational design framework using a single low-tech and low-energy fabrication device to create nonrepetitive volumetric panels cast in situ. The design input for these panels is derived from design preferences and environmental control data. The technique expands upon easy to fabricate and cast methods, targeting less-developed logistical settings worldwide, and thus responding to imminent needs related to climate, available resources, and the economy.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2020_046
id	caadria2020_046
authors	Alva, Pradeep, Lee, Han Jie, Lin, Zhuoli, Mehta, Palak, Chen, Jielin and Janssen, Patrick
year	2020
title	Geo-computation for District Planning - An Agile Automated Modelling Approach
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 793-802
doi	https://doi.org/10.52842/conf.caadria.2020.1.793
summary	This paper focuses on developing a novel geo-computational methodology for automating the generation of design options for district planning. The knowledge contribution focuses on the ability of the planners and designers to interact with and override the automated process. This approach is referred to as "agile automated modelling". The approach is demonstrated through a case study in which three adjacent districts are generated with a total area of approximately 1300 hectares. An automated modelling process is implemented based on a set of core planning principles established by the planners. The automated process generates street networks, land parcels, and 3-dimensional urban models. The process is broken down into three steps and users are then able to intervene at the end of every step to override and modify the outputs. This aims to help planners and designers to iteratively generate and assess various planning outcomes.
keywords	Geo-computation; procedural modelling; GIS; planning automation; neural network
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2020_60
id	sigradi2020_60
authors	Asmar, Karen El; Sareen, Harpreet
year	2020
title	Machinic Interpolations: A GAN Pipeline for Integrating Lateral Thinking in Computational Tools of Architecture
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 60-66
summary	In this paper, we discuss a new tool pipeline that aims to re-integrate lateral thinking strategies in computational tools of architecture. We present a 4-step AI-driven pipeline, based on Generative Adversarial Networks (GANs), that draws from the ability to access the latent space of a machine and use this space as a digital design environment. We demonstrate examples of navigating in this space using vector arithmetic and interpolations as a method to generate a series of images that are then translated to 3D voxel structures. Through a gallery of forms, we show how this series of techniques could result in unexpected spaces and outputs beyond what could be produced by human capability alone.
keywords	Latent space, GANs, Lateral thinking, Computational tools, Artificial intelligence
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	ecaade2020_240
id	ecaade2020_240
authors	Bouza, Hayley and Aºut, Serdar
year	2020
title	Advancing Reed-Based Architecture through Circular Digital Fabrication
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 117-126
doi	https://doi.org/10.52842/conf.ecaade.2020.1.117
summary	This paper presents a completed research project that proposes a new approach for creating circular buildings through the use of biodegradable, in situ resources with the help of computational design and digital fabrication technologies. Common Reed (Phragmites Australis) is an abundantly available natural material found throughout the world. Reed is typically used for thatch roofing in Europe, providing insulation and a weather-tight surface. Elsewhere, traditional techniques of weaving and bundling reeds have long been used to create entire buildings. The use of a digital production chain was explored as a means towards expanding the potential of reed as a sustainable, locally produced, construction material. Following an iterative process of designing from the micro to the macro scale and by experimenting with robotic assembly, the result is a reed-based system in the form of discrete components that can be configured to create a variety of structures.
keywords	Phragmites Australis; Reed; Discrete Design; Robotic Assembly; Circular Design; Biodegradable Architecture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2020_093
id	caadria2020_093
authors	Cerovsek, Tomo and Martens, Bob
year	2020
title	The Evolution of CAADRIA Conferences - A Bibliometric Approach
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 325-334
doi	https://doi.org/10.52842/conf.caadria.2020.1.325
summary	This paper presents an analysis of the output, impact, use and content of 1,860 papers that were published in the CAADRIA conference proceedings over the last 20+ years (from 1996 to 2019). The applied methodology is a blend of bibliometrics, webometrics and clustering with text mining. The bibliometric analysis leads to quantitative and qualitative results on three levels: (1) author, (2) article and (3) association. The most productive authors authored over 50 papers, and the top 20% authors have over 80 % of all citations generated by CAADRIA proceedings. The overall impact of CAADRIA may be characterised by nearly 2,000 known citations and by the h-index that is 17. The webometrics based on CumInCAD.org reveals that the CAADRIA papers served over 200 k users, which is a considerable visibility for scientific CAAD output. The keywords most frequently used by authors were digital fabrication, BIM and parametric, generative, computational design. Notably, 90% of the papers' descriptors are 2-grams. This study may be useful to researchers, educators and publishers interested in CAAD.
keywords	bibliometrics; open source; text clustering; n-gram
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2020_348
id	ecaade2020_348
authors	Chiujdea, Ruxandra Stefania and Nicholas, Paul
year	2020
title	Design and 3D Printing Methodologies for Cellulose-based Composite Materials
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 547-554
doi	https://doi.org/10.52842/conf.ecaade.2020.1.547
summary	A growing awareness of architecture's environmental responsibility is encouraging a shift from an industrial age to an ecological one. This shift emphasises a new era of materiality, characterised by a special focus on bio-polymers. The potential of these materials is to address unsustainable modes of resource consumption, and to rebalance our relationship with the natural. However, bio-polymers also challenge current design and manufacturing practices, which rely on highly manufactured and standardized materials. In this paper, we present material experiments and digital design and fabrication methodologies for cellulose-based composites, to create porous biodegradable panels. Cellulose, the most abundant bio-polymer on Earth, has potential for differentiated architectural applications. A key limit is the critical role of additive fabrication methods for larger scale elements, which are a subject of ongoing research. In this paper, we describe how controlling the interdependent relationship between the additive manufacturing process and the material grading enables the manipulation of the material's performance, and the related control aspects including printing parameters such as speed, nozzle diameter, air flow, etc., as well as tool path trajectory. Our design exploration responds to the emerging fabrication methods to achieve different levels of porosity and depth which define the geometry of a panel.
keywords	cellulose-based composite material; additive manufacturing; material grading; digital fabrication; spatial print trajectory; porous panels
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2020_118
id	caadria2020_118
authors	Chow, Ka Lok and van Ameijde, Jeroen
year	2020
title	Generative Housing Communities - Design of Participatory Spaces in Public Housing Using Network Configurational Theories
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 283-292
doi	https://doi.org/10.52842/conf.caadria.2020.2.283
summary	This research-by-design project explores how public housing estates can accommodate social diversity and the appropriation of shared spaces, using qualitative and quantitative analysis of circulation networks. A case study housing estate in Hong Kong was analysed through field observations of movements and activities and as a site for the speculative re-design of shared spaces. Generative design processes were developed based on several parameters, including shortest paths, visibility integration and connectivity integration (Hillier & Hanson, 1984). Additional tools were developed to combine these techniques with optimisation of sunlight access, maximisation of views for residential towers and the provision of permeability of ground level building volumes. The project demonstrates how flexibility of use and social engagement can constitute a platform for self-organisation, similar to Jane Jacobs' notion of vibrant streets leading to active and progressive communities. It shows how computational design and configurational theories can promote a bottom-up approach for generating new types of residential environments that support participatory and diverse communities, rather than a conventional top-down approach that is perceived to embody mechanisms of social regimentation.
keywords	Urban Planning and Design; Network Configuration; Community Space and Social Interaction; Hong Kong Public Housing
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cdrf2019_17
id	cdrf2019_17
authors	Chuan Liu, Jiaqi Shen, Yue Ren, and Hao Zheng
year	2020
title	Pipes of AI – Machine Learning Assisted 3D Modeling Design
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_2
summary	Style transfer is a design technique that is based on Artificial Intelligence and Machine Learning, which is an innovative way to generate new images with the intervention of style images. The output image will carry the characteristic of style image and maintain the content of the input image. However, the design technique is employed in generating 2D images, which has a limited range in practical use. Thus, the goal of the project is to utilize style transfer as a toolset for architectural design and find out the possibility for a 3D modeling design. To implement style transfer into the research, floor plans of different heights are selected from a given design boundary and set as the content images, while a framework of a truss structure is set as the style image. Transferred images are obtained after processing the style transfer neural network, then the geometric images are translated into floor plans for new structure design. After the selection of the tilt angle and the degree of density, vertical components that connecting two adjacent layers are generated to be the pillars of the structure. At this stage, 2D style transferred images are successfully transformed into 3D geometries, which can be applied to the architectural design processes. Generally speaking, style transfer is an intelligent design tool that provides architects with a variety of choices of idea-generating. It has the potential to inspire architects at an early stage of design with not only 2D but also 3D format.
series	cdrf
email
last changed	2022/09/29 07:51

_id	acadia20_436
id	acadia20_436
authors	Chun Hin Fong, Jacky; Long Wun Poon, Adabelle; Sze Ngan, Wing; Hei Ho, Chung; Goepel, Garvin; Crolla, Kristof
year	2020
title	Augmenting Craft with Mixed Reality
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 436-444.
doi	https://doi.org/10.52842/conf.acadia.2020.1.436
summary	This paper discusses novel methods for and advantages of integrating augmented reality (AR) and photogrammetry in hand clay-sculpting workflows. These techniques permit nontrained users to achieve higher precision during the sculpting process by holographically overlaying instructions from digital 3D source geometry on top of the sculpting material. By employing alternative notational systems in design implementation methods, the research positions itself in a postdigital context aimed at humanizing digital technologies. Throughout history, devices have been developed to increase production, such as Henry Dexter’s 1842 “Apparatus for Sculptors” for marble sculpting. Extrapolating from this, the workflow presented in this paper uses AR to overlay extracted information from 3D models directly onto the sculptor’s field of vision. This information can then become an AR-driven guidance system that assists the sculptor. Using the Microsoft HoloLens, holographic instructions are introduced in the production sequence, connecting the analog sculpture fabrication directly with a digital environment, thus augmenting the craftspeople’s agency. A series of AR-aided sculpting methods were developed and tested in a demonstrator case study project that created a small-scale clay copy of Henry Moore’s Sheep Piece (1971–1972). This paper demonstrates how user-friendly software and hardware tools have lowered the threshold for end users to develop new methods that straightforwardly facilitate and improve their crafts’ effectiveness and agency. This shows that the fusion of computational design technology and AR visualization technology can innovate a specific craft’s design and production workflow, opening the door for further application developments in more architecture-specific fabrication contexts.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2020_316
id	caadria2020_316
authors	Czynska, Klara
year	2020
title	Computational Methods for Examining Reciprocal Relations between the Viewshed of Planned Facilities and Historical Dominants - Their integration within the cultural landscape
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 853-862
doi	https://doi.org/10.52842/conf.caadria.2020.1.853
summary	The article presents a methodology for the assessment of the impact of new buildings on the cultural landscape, in particular the exposure of historical landmarks. While using digital analysis and a 3D city model, the methodology examines reciprocal visual relations between historical and planned buildings. The following methods have been used: a) Visual Impact Size (VIS) which enables to determine a visual impact area and the degree of architectural facility domination in space; b) comparative analysis (cumulative viewshed) which enables to determine areas where viewsheds of new investment and historical buildings overlap; c) simulation of selected views from the level of human eyesight. The proposed landscape examination methodology has been presented using the case study of Katowice, Poland. The goal was to determine reciprocal relations between historical landmarks of the Silesia Museum and tall buildings planned in the vicinity. The study used a Digital Surface Model (DSM), a 3D city model. All simulations have been performed using software developed by the author (C++).
keywords	cumulative viewshed; digital cityscape analysis; historical dominants; visual impact; VIS method
series	CAADRIA
email
last changed	2022/06/07 07:56

For more results click below: