Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 651

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2021_257
id	ecaade2021_257
authors	Cichocka, Judyta Maria, Loj, Szymon and Wloczyk, Marta Magdalena
year	2021
title	A Method for Generating Regular Grid Configurations on Free-From Surfaces for Structurally Sound Geodesic Gridshells
doi	https://doi.org/10.52842/conf.ecaade.2021.2.493
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 493-502
summary	Gridshells are highly efficient, lightweight structures which can span long distances with minimal use of material (Vassallo & Malek 2017). One of the most promising and novel categories of gridshells are bending-active (elastic) systems (Lienhard & Gengnagel 2018), which are composed of flexible members (Kuijenhoven & Hoogenboom 2012). Timber elastic gridshells can be site-sprung or sequentially erected (geodesic). While a lot of research focus is on the site-sprung ones, the methods for design of sequentially-erected geodesic gridshells remained underdeveloped (Cichocka 2020). The main objective of the paper is to introduce a method of generating regular geodesic grid patterns on free-form surfaces and to examine its applicability to design structurally feasible geodesic gridshells. We adopted differential geometry methods of generating regular bidirectional geodesic grids on free-form surfaces. Then, we compared the structural performance of the regular and the irregular grids of the same density on three free-form surfaces. The proposed method successfully produces the regular geodesic grid patterns on the free-form surfaces with varying curvature-richness. Our analysis shows that gridshells with regular grid configurations perform structurally better than those with irregular patterns. We conclude that the presented method can be readily used and can expand possibilities of application of geodesic gridshells.
keywords	elastic timber gridshell; bending-active structure; grid configuration optimization; computational differential geometry; material-based design methodology; free-form surface; pattern; geodesic
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2020_023
id	caadria2020_023
authors	Liu, Chenjun
year	2020
title	Double Loops Parametric Design of Surface Steel Structure Based on Performance and Fabrication
doi	https://doi.org/10.52842/conf.caadria.2020.1.023
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 23-33
summary	In intelligent epoch, automatic parameter design systems reduce the requirements of the skills needed to create objects. The creator only needs to select the most perceptual primitive form to automatically generate the data system that iterates to the most efficient solution. In this paper, a method of combining performance driven optimization with parametric design is proposed. The iterative evolution is under the control of performance loop and fabrication loop, which makes all the data provided by parametric design in a practical project available for exploring structural analysis and digital prefabrication. Related to the case of surface steel structure, parametric optimization is not limited to a set of shape types or design problems, it would be based on the generality and built-in characteristics of parametric modelling environment in the most convenient and flexible way. (Rolvink et al. 2010)And the given parameters would be fed back on geometric structure, performance indicators, and design variables, so that designers can easily and effectively coordinate and try different solutions. The system transforms the generated data into machine language so that the process including design, analysis, manufacturing, and construction can maintain the orthogonal persistence of the data.
keywords	parametric design; component prefabrication; curved steel structure; performance driven
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2020_188
id	sigradi2020_188
authors	Matos, Elisa Bomtempo; Martinez, Andressa Carmo Pena
year	2020
title	Gridshell structural evaluation criteria based on Upward and Downward Modeling Methods in Karamba3D
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 188-195
summary	Despite the vast number of researches that address Gridshells as regular meshes, there is a lack of studies discussing hybrid meshes. In this context, this paper presents a parametric approach and employs visual algorithms for designing digital gridshells with different mesh patterns. We intend to formulate a methodology for Karamba 3D applications that address the structural performance according to variations in geometric composition, number of props, and construction methods. The work seeks to examine patterns that improve structural performance, through a parallel discussion between Upward and Downward modeling methods. Although the Upward modeling method is the most recurrent in studies on the topic, in this study, the Downward method generated structures with better structural performance.
keywords	Gridshell, Pattern, Geometric Modeling, Structural Design, Structural Optimization
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	caadria2020_035
id	caadria2020_035
authors	Pereira, InÃªs, BelÃ©m, Catarina and LeitÃ£o, AntÃ³nio
year	2020
title	Escaping Evolution - A Study on Multi-Objective Optimization
doi	https://doi.org/10.52842/conf.caadria.2020.1.295
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 295-304
summary	The architectural field is currently experiencing a paradigm shift towards a more environmentally-aware design process. In this new paradigm, known as Performance-Based Design (PBD), building performance emerges as a guiding principle. Unfortunately, PBD entails several problems, for instance, building design is often associated with the simultaneous assessment of multiple performance criteria, which dramatically increases the complexity of the problem. In this vein, recent works claim that coupling optimization tools with PBD approaches allows for more efficient and optima-oriented strategies. This approach, known as Algorithmic Optimization, is based on the use of an optimization tool combined with a parametric model of a design to iteratively generate more efficient design alternatives. This paper focus on evaluating and comparing different classes of Multi-Objective Optimization (MOO) algorithms, namely, metaheuristics and model-based ones. In addition, in order to try to better understand the algorithms' suitability to different optimization problems, this research analyses two different MOO design problems.
keywords	Performance-Based Design; Algorithmic Optimization; Multi-Objective Optimization
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	acadia20_198
id	acadia20_198
authors	Sinke Baranovskaya, Yuliya; Tamke, Martin; Ramsgaard Thomsen, Mette
year	2020
title	Simulation and Calibration of Graded Knitted Membranes
doi	https://doi.org/10.52842/conf.acadia.2020.2.198
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 198-207.
summary	The grading of knit changes its geometrical performance and steers membrane expansion. However, knit possesses challenges of material predictability and digital simulation, due to its multiscalar complexity and anisotropic properties. Taking as a challenge the lack of digital solutions incorporating CNC-knit performance into the design model, this paper presents a novel approach for the design-integrated simulation of graded knit, informed by an empirical dataset analysis in combination with genetic optimization algorithms. Here the simulation design tool reflects the differences of industrially knitted textile panel behavior through digital mesh grading. Diversified fabric stiffness is achieved by intertwining the yarn into variegated stitch types that steer the textile expansion under load. These are represented digitally as zoned quad meshes with each segment assigned a stiffness value. Mesh stiffness values are optimized by minimizing the distance between the point clouds and the digital mesh, which are documented through deviation colored maps. This work concludes that design properties—pattern topology, stitch ratio, pattern density—play an important role in textile panel performance under load. Stiffness values derived from the optimization are higher for shallower designs and lower for the deeper cones.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia20_290
id	acadia20_290
authors	Stuart-Smith, Robert; Danahy, Patrick; Revelo La Rotta, Natalia
year	2020
title	Topological and Material Formation
doi	https://doi.org/10.52842/conf.acadia.2020.1.290
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 290-299.
summary	Extrusion-based additive manufacturing (AM) is gaining traction in the construction industry, offering lower environmental and economic costs through reductions in material and production time. AM designs achieve these reductions by increasing topological and geometric complexity, and through variable material distribution via custom-programmed robot tool paths. Limited approaches are available to develop AM building designs within a topologically free design search or to leverage material affects relative to structural performance. Established methods such as topological structural optimization (TSO) operate primarily within design rationalization, demonstrating less formal or aesthetic diversity than agent-based methods that exhibit behavioral character. While material-extrusion gravitational affects have been explored in AM research using viscous materials such as concrete and ceramics, established methods are not sufficiently integrated into simulation and structural analysis workflows. A novel three-part method is proposed for the design and simulation of extrusion-based AM that includes topoForm, an evolutionary multi-agent software capable of generating diverse topological designs; matForm, an agent-based AM robot tool-path generator that is geometrically agnostic and adapts material effects to local structural and geometric data; and matSim, a material-physics simulation environment that enables high-resolution AM material effects to be simulated and structurally and aesthetically analyzed. The research enables designers to incorporate and simulate material behavior prior to fabrication and produce instructions suitable for industrial robot AM. The approach is demonstrated in the generative design of four AM column-like elements.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia20_188
id	acadia20_188
authors	Tian, Runjia; Wang, Yujie; Yüce Gün, Onur
year	2020
title	Data-Driven Midsole
doi	https://doi.org/10.52842/conf.acadia.2020.2.188
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 188-197.
summary	With the advancement of additive manufacturing, computational approaches are gaining popularity in midsole design. We develop an experimental understanding of the midsole as a field and develop designs that are informed by running data. We streamline two data types, namely underfoot pressure and surface deformation, to generate designs. Unlike typical approaches in which certain types of lattices get distributed across the midsole according to average pressure data, we use ARAMIS data, reflecting the distinct surface deformation characteristics, as our primary design driver. We analyze both pressure and deformation data temporally, and temporal data patterns help us generate and explore a design space to search for optimal designs. First, we define multiple zones across the midsole space using ARAMIS data clustering. Then we develop ways to blend and distribute auxetic and isosurface lattices across the midsole. We hybridize these two structures and blend data-determined zones to enhance visual continuity while applying FEA simulations to ensure structural integrity. This multi-objective optimization approach helps enhance the midsole’s structural performance and visual coherence while introducing a novel approach to 3D-printed footwear design.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2020_281
id	caadria2020_281
authors	Abdelmohsen, Sherif and Hassab, Ahmed
year	2020
title	A Computational Approach for the Mass Customization of Materially Informed Double Curved A Computational Approach for the Mass Customization of Materially Informed Double Curved Façade Panels
doi	https://doi.org/10.52842/conf.caadria.2020.1.163
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 163-172
summary	Despite recent approaches to enable the mass customization of double curved faÃ§ade panels, there still exist challenges including waste reduction, accuracy, surface continuity, economic feasibility, and workflow disintegration. This paper proposes a computational approach for the design and fabrication of materially informed double curved faÃ§ade panels with complex geometry. This approach proposes an optimized workflow to generate customizable double curved panels with complex geometry and different material properties, and optimize fabrication workflow for waste reduction. This workflow is applied to four different fabrication techniques: (1) vacuum forming, (2) clay extrusion, (3) sectioning, and (4) tessellation. Four experiments are introduced to apply surface rationalization and optimization using Rhino and Grasshopper scripting. Upon simulating each of the four design-to-fabrication techniques through different iterations, the experiment results demonstrated how the proposed workflows produced optimized surfaces with higher levels of accuracy and reduced waste material, customized per type of material and surface complexity.
keywords	Digital fabrication; Double curved facades; Mass customization; Design-to-fabrication
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2020_443
id	caadria2020_443
authors	Abuzuraiq, Ahmed M. and Erhan, Halil
year	2020
title	The Many Faces of Similarity - A Visual Analytics Approach for Design Space Simplification
doi	https://doi.org/10.52842/conf.caadria.2020.1.485
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 485-494
summary	Generative design methods may involve a complex design space with an overwhelming number of alternatives with their form and design performance data. Existing research addresses this complexity by introducing various techniques for simplification through clustering and dimensionality reduction. In this study, we further analyze the relevant literature on design space simplification and exploration to identify their potentials and gaps. We find that the potentials include: alleviating the choice overload problem, opening up new venues for interrelating design forms and data, creating visual overviews of the design space and introducing ways of creating form-driven queries. Building on that, we present the first prototype of a design analytics dashboard that combines coordinated and interactive visualizations of design forms and performance data along with the result of simplifying the design space through hierarchical clustering.
keywords	Visual Analytics; Design Exploration; Dimensionality Reduction; Clustering; Similarity-based Exploration
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia20_516
id	acadia20_516
authors	Aghaei Meibodi, Mania; Voltl, Christopher; Craney, Ryan
year	2020
title	Additive Thermoplastic Formwork for Freeform Concrete Columns
doi	https://doi.org/10.52842/conf.acadia.2020.1.516
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 516-525.
summary	The degree of geometric complexity a concrete element can assume is directly linked to our ability to fabricate its formwork. Additive manufacturing allows fabrication of freeform formwork and expands the design possibilities for concrete elements. In particular, fused deposition modeling (FDM) 3D printing of thermoplastic is a useful method of formwork fabrication due to the lightweight properties of the resulting formwork and the accessibility of FDM 3D printing technology. The research in this area is in early stages of development, including several existing efforts examining the 3D printing of a single material for formwork— including two medium-scale projects using PLA and PVA. However, the performance of 3D printed formwork and its geometric complexity varies, depending on the material used for 3D printing the formwork. To expand the existing research, this paper reviews the opportunities and challenges of using 3D printed thermoplastic formwork for fabricating custom concrete elements using multiple thermoplastic materials. This research cross-references and investigates PLA, PVA, PETG, and the combination of PLA-PVA as formwork material, through the design and fabrication of nonstandard structural concrete columns. The formwork was produced using robotic pellet extrusion and filament-based 3D printing. A series of case studies showcase the increased geometric freedom achievable in formwork when 3D printing with multiple materials. They investigate the potential variations in fabrication methods and their print characteristics when using different 3D printing technologies and printing materials. Additionally, the research compares speed, cost, geometric freedom, and surface resolution.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2020_064
id	ecaade2020_064
authors	Agirbas, Asli
year	2020
title	Building Energy Performance of Complex Forms - Test simulation of minimal surface-based form optimization
doi	https://doi.org/10.52842/conf.ecaade.2020.1.259
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 259-268
summary	Many optimization tools are developed in line with the form-energy relationship to ensure energy efficiency in buildings. However, such studies with complex forms are very limited. Therefore, the MSO-2 model was developed. In this model, on the roof of the conceptual form, minimal surface is used, thus complex forms can be created. In this model, the conceptual form can be optimized (for one day) according to these objectives: increasing daylight in the space with maximum value limitation, reducing radiation on the roof, and enlarging floor surface area of the conceptual form with minimum value limitation. A test simulation was performed with this model. Thus, in order to find the most optimized form in multi-objective optimization, more generations could be produced in a short time and optimized conceptual forms, which were produced, could be tested for energy efficiency.
keywords	Multi-Objective Optimization; Radiation Analysis; Building energy performance; Daylighting Analysis
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia20_66
id	acadia20_66
authors	Aviv, Dorit; Wang, Zherui; Meggers, Forrest; Ida, Aletheia
year	2020
title	Surface Generation of Radiatively-Cooled Building Skin for Desert Climate
doi	https://doi.org/10.52842/conf.acadia.2020.1.066
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 66-73.
summary	A radiatively cooled translucent building skin is developed for desert climates, constructed out of pockets of high heat-capacity liquids. The liquids are contained by a wavelength-selective membrane enclosure, which is transmissive in the infrared range of electromagnetic radiation but reflective in the shortwave range, and therefore prevents overheating from solar radiation and at the same time allows for passive cooling through exposure of its thermal mass to the desert sky. To assess the relationship between the form and performance of this envelope design, we develop a feedback loop between computational simulations, analytical models, and physical tests. We conduct a series of simulations and bench-scale experiments to determine the thermal behavior of the proposed skin and its cooling potential. Several materials are considered for their thermal storage capacity. Hydrogel cast into membrane enclosures is tested in real climate conditions. Slurry phase change materials (PCM) are also considered for their additional heat storage capacity. Challenges of membrane welding patterns and nonuniform expansion of the membrane due to the weight of the enclosed liquid are examined in both digital simulations and physical experiments. A workflow is proposed between the radiation analysis based on climate data, the formfinding simulations of the elastic membrane under the liquid weight, and the thermal storage capacity of the overall skin.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2020_043
id	caadria2020_043
authors	Bai, Nan, Nourian, Pirouz, Xie, Anping and Pereira Roders, Ana
year	2020
title	Towards a Finer Heritage Management - Evaluating the Tourism Carrying Capacity using an Agent-Based Model
doi	https://doi.org/10.52842/conf.caadria.2020.1.305
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 305-314
summary	As one of the most important areas in the Palace Museum, Beijing, China, the Hall of Mental Cultivation had suffered from overcrowding of visitors before it was closed in 2016 for conservation. Preparing for the reopening in 2020, the Palace Museum decided to take the chance and initiate finer-grained tourism management in the Hall. This research intends to provide an audio-guided touring program by dynamically evaluating the Tourism Carrying Capacity (TCC) with the highlight spots in the Hall, to operate the touring program spatiotemporally. Framing an optimization problem for the touring program, an agent-based simulator, Thunderhead Pathfinder, originally developed for evacuation in the emergency, is utilized to verify the performance of the touring system. The simulation shows that the proposed touring program could precisely fit all the key requirements to improve the visitors' experience, to guarantee heritage safety, and to ensure more efficient management.
keywords	Tourism Carrying Capacity; Agent-Based Simulation; Operations Research; Heritage Management
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2020_240
id	ecaade2020_240
authors	Bouza, Hayley and Aºut, Serdar
year	2020
title	Advancing Reed-Based Architecture through Circular Digital Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2020.1.117
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 117-126
summary	This paper presents a completed research project that proposes a new approach for creating circular buildings through the use of biodegradable, in situ resources with the help of computational design and digital fabrication technologies. Common Reed (Phragmites Australis) is an abundantly available natural material found throughout the world. Reed is typically used for thatch roofing in Europe, providing insulation and a weather-tight surface. Elsewhere, traditional techniques of weaving and bundling reeds have long been used to create entire buildings. The use of a digital production chain was explored as a means towards expanding the potential of reed as a sustainable, locally produced, construction material. Following an iterative process of designing from the micro to the macro scale and by experimenting with robotic assembly, the result is a reed-based system in the form of discrete components that can be configured to create a variety of structures.
keywords	Phragmites Australis; Reed; Discrete Design; Robotic Assembly; Circular Design; Biodegradable Architecture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2020_307
id	ecaade2020_307
authors	Caetano, Ines and Leitao, António
year	2020
title	When the Geometry Informs the Algorithm - A hybrid visual/textual programming framework for facade design
doi	https://doi.org/10.52842/conf.ecaade.2020.2.371
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 371-380
summary	Facade design is becoming increasingly complex, forcing architects to more frequently resort to analysis and optimization processes. However, these processes are time-consuming and require the coordination of multiple tools. Algorithmic Design (AD) has the potential to overcome these limitations through the use of algorithms implemented in Textual Programming Languages (TPLs) or Visual Programming Languages (VPLs). VPLs are more used in architecture due to their smoother learning curve and user-friendliness, but TPLs are better suited than VPLs for handling complex AD problems. To make TPLs more appealing to architects, we incorporated VPLs' features in the textual paradigm, namely, Visual Input Mechanisms (VIMs). In this paper, we propose an extension to an existing AD framework for the design exploration, analysis, and optimization of facades to support a TPL-based approach that handles VIMs.
keywords	Algorithmic Design; Facade Design; Textual Languages; Visual Input
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2020_391
id	caadria2020_391
authors	Caetano, InÃªs, Garcia, Sara, Pereira, InÃªs and LeitÃ£o, AntÃ³nio
year	2020
title	Creativity Inspired by Analysis - an algorithmic design system for designing structurally feasible faÃ§ades
doi	https://doi.org/10.52842/conf.caadria.2020.1.599
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 599-608
summary	Although structural performance has a crucial role in the overall design, its analysis is often postponed to later design stages. This largely occurs because analysis processes are time consuming and require the use of specific models and tools. This problem is then aggravated by the number of design variations that have to be analysed until an acceptable solution is found. However, the implementation of design changes at later stages is limited, as also is their impact on the solution's final performance. Fortunately, with algorithmic design, we can overcome these limitations, as it not only supports complex designs and facilitates design changes, but also automates the production of the specific models and their subsequent analysis and optimization. In this research we focus on buildings faÃ§ades, proposing an algorithmic design system to support their design, structural analysis, and optimization.
keywords	Performance-based Design; Algorithmic Design; Algorithmic Structural Analysis; Algorithmic Optimization; FaÃ§ade Design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2020_149
id	sigradi2020_149
authors	Canestrino, Giuseppe; Laura, Greco; Spada, Francesco; Lucente, Roberta
year	2020
title	Generating architectural plan with evolutionary multiobjective optimization algorithms: a benchmark case with an existent construction system
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 149-156
summary	In architectural design, evolutionary multiobjective optimization algorithms (EMOA) have found use in numerous practical applications in which qualitative and quantitative aspects can be transformed into fitness functions to be optimized. This paper shows that they can be used in an architectural plan design process that starts from a more traditional approach. The benchmark case uses a novel construction system, called Ac.Ca. Building, with a vast architectural and technological database, arleady validated, to generate architectural plan for a residential towerbuilding with a parametric approach and EMOA. The proposed framework differs from past research because uses spatial units with high level of architectural and tecnological definition.
keywords	Architectural design, Parametric architecture, Performance-driven design, architectural layout, evolutionary multiobjective optimization
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	acadia20_604
id	acadia20_604
authors	Craney, Ryan; Adel, Arash
year	2020
title	Engrained Performance
doi	https://doi.org/10.52842/conf.acadia.2020.1.604
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 604-613.
summary	This project presents a novel fabrication-aware and performance-driven computational design method that facilitates the design and robotic fabrication of a wood shingle facade system. The research merges computational design, robotic fabrication, and building facade optimization into a seamless digital design-to-fabrication workflow. The research encompasses the following topics: (1) a constructive system integrating the rules, constraints, and dependencies of conventional shingle facades; (2) an integrative computational design method incorporating material, robotic fabrication, and assembly constraints; (3) an optimization method for facade sun shading; and (4) a digital design-to-fabrication workflow informing the robotic fabrication procedures. The result is an integrative computational design method for the design of a wood shingle facade. Environmental analysis and multi-objective optimization are coupled with a variable facade surface to produce several optimal design solutions that conform to the constraints of the robotic setup and constructive system. When applied to architectural design, the proposed integrative computational design method demonstrates significant improvements in facade sun-shading performance while also linking the digital design to the fabrication process.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	artificial_intellicence2019_147
id	artificial_intellicence2019_147
authors	Ding Wen Bao, Xin Yan, Roland Snooks, and Yi Min Xie
year	2020
title	Bioinspired Generative Architectural Design Form-Finding and Advanced Robotic Fabrication Based on Structural Performance
doi	https://doi.org/https://doi.org/10.1007/978-981-15-6568-7_10
source	Architectural Intelligence Selected Papers from the 1st International Conference on Computational Design and Robotic Fabrication (CDRF 2024)
summary	Due to the potential to generate forms with high efficiency and elegant geometry, topology optimization is widely used in architectural and structural designs. This paper presents a working flow of form-finding and robotic fabrication based BESO (Bi-directional Evolutionary Structure Optimization) optimization method. In case there are some other functional requirements or condition limitations, some useful modifications are also implemented in the process. With this kind of working flow, it is convenient to foreknow or control the structural optimization direction before the optimization process. Furthermore, some fabrication details of the optimized model will be discussed because there are also many notable technical points between computational optimization and robotic fabrication.
series	Architectural Intelligence
email
last changed	2022/09/29 07:28

_id	ecaade2020_432
id	ecaade2020_432
authors	Fragkia, Vasiliki and Worre Foged, Isak
year	2020
title	Methods for the Prediction and Specification of Functionally Graded Multi-Grain Responsive Timber Composites
doi	https://doi.org/10.52842/conf.ecaade.2020.2.585
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 585-594
summary	The paper presents design-integrated methods for high-resolution specification and prediction of functionally graded wood-based thermal responsive composites, using machine learning. The objective is the development of new circular design workflow, employing robotic fabrication, in order to predict fabrication files linked to material performance and design requirements, focused on application for intrinsic responsive and adaptive architectural surfaces. Through an experimental case study, the paper explores how machine learning can form a predictive design framework where low-resolution data can solve material systems at high resolution. The experimental computational and prototyping studies show that the presented image-based machine learning method can be adopted and adapted across various stages and scales of architectural design and fabrication. This in turn allows for a design-per-requirement approach that optimizes material distribution and promotes material economy.
keywords	material specification; responsive timber composites; machine learning; robotic fabrication; building envelopes
series	eCAADe
email
last changed	2022/06/07 07:50

For more results click below: