Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 653

Reformat results as: short short into frame detailed detailed into frame

_id	acadia20_436
id	acadia20_436
authors	Chun Hin Fong, Jacky; Long Wun Poon, Adabelle; Sze Ngan, Wing; Hei Ho, Chung; Goepel, Garvin; Crolla, Kristof
year	2020
title	Augmenting Craft with Mixed Reality
doi	https://doi.org/10.52842/conf.acadia.2020.1.436
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 436-444.
summary	This paper discusses novel methods for and advantages of integrating augmented reality (AR) and photogrammetry in hand clay-sculpting workflows. These techniques permit nontrained users to achieve higher precision during the sculpting process by holographically overlaying instructions from digital 3D source geometry on top of the sculpting material. By employing alternative notational systems in design implementation methods, the research positions itself in a postdigital context aimed at humanizing digital technologies. Throughout history, devices have been developed to increase production, such as Henry Dexter’s 1842 “Apparatus for Sculptors” for marble sculpting. Extrapolating from this, the workflow presented in this paper uses AR to overlay extracted information from 3D models directly onto the sculptor’s field of vision. This information can then become an AR-driven guidance system that assists the sculptor. Using the Microsoft HoloLens, holographic instructions are introduced in the production sequence, connecting the analog sculpture fabrication directly with a digital environment, thus augmenting the craftspeople’s agency. A series of AR-aided sculpting methods were developed and tested in a demonstrator case study project that created a small-scale clay copy of Henry Moore’s Sheep Piece (1971–1972). This paper demonstrates how user-friendly software and hardware tools have lowered the threshold for end users to develop new methods that straightforwardly facilitate and improve their crafts’ effectiveness and agency. This shows that the fusion of computational design technology and AR visualization technology can innovate a specific craft’s design and production workflow, opening the door for further application developments in more architecture-specific fabrication contexts.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2020_141
id	caadria2020_141
authors	Dezen-Kempter, Eloisa, Mezencio, Davi Lopes, Miranda, Erica De Matos, De SÃ¡, Danilo Pico and Dias, Ulisses
year	2020
title	Towards a Digital Twin for Heritage Interpretation - from HBIM to AR visualization
doi	https://doi.org/10.52842/conf.caadria.2020.2.183
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 183-191
summary	Data-driven Building Information Modelling (BIM) technology has brought new tools to efficiently deal with the tension between the real and the virtual environments in the field of Architecture, Engineering, Construction, and Operation (AECO). For historic assets, BIM represents a paradigm shift, enabling better decision-making about preventive maintenance, heritage management, and interpretation. The potential application of the Historic-BIM is creating a digital twin of the asset. This paper deals with the concept of a virtual environment for the consolidation and dissemination of heritage information. Here we show the process of creating interactive virtual environments for the Pampulha Modern Ensemble designed by Oscar Niemeyer in the 1940s, and the workflow to their dissemination in an AR visualization APP. Our results demonstrate the APP feasibility to the Pampulha's building interpretation.
keywords	Augmented Reality (AR); Historic Building Information Modelling (HBIM); Heritage Interpretation; Modern Architecture
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia20_350
id	acadia20_350
authors	Atanasova, Lidia; Mitterberger, Daniela; Sandy, Timothy; Gramazio, Fabio; Kohler, Matthias; Dörfler, Kathrin
year	2020
title	Prototype As Artefact
doi	https://doi.org/10.52842/conf.acadia.2020.1.350
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 350-359.
summary	In digital design-to-fabrication workflows in architecture, in which digitally controlled machines perform complex fabrication tasks, all design decisions are typically made before production. In such processes, the formal definition of the final shape is explicitly inscribed into the design model by means of corresponding step-by-step machine instructions. The increasing use of augmented reality (AR) technologies for digital fabrication workflows, in which people are instructed to carry out complex fabrication tasks via AR interfaces, creates an opportunity to question and adjust the level of detail and the nature of such explicit formal definitions. People’s cognitive abilities could be leveraged to integrate explicit machine intelligence with implicit human knowledge and creativity, and thus to open up digital fabrication to intuitive and spontaneous design decisions during the building process. To address this question, this paper introduces open-ended Prototype-as-Artefact fabrication workflows that examine the possibilities of designing and creative choices while building in a human-robot collaborative setting. It describes the collaborative assembly of a complex timber structure with alternating building actions by two people and a collaborative robot, interfacing via a mobile device with object tracking and AR visualization functions. The spatial timber assembly being constructed follows a predefined grammar but is not planned at the beginning of the process; it is instead designed during fabrication. Prototype-as-Artefact thus serves as a case study to probe the potential of both intuitive and rational aspects of building and to create new collaborative work processes between humans and machines.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2020_426
id	caadria2020_426
authors	Goepel, Garvin and Crolla, Kristof
year	2020
title	Augmented Reality-based Collaboration - ARgan, a bamboo art installation case study
doi	https://doi.org/10.52842/conf.caadria.2020.2.313
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 313-322
summary	ARgan is a geometrically complex bamboo sculpture that relied on Mixed Reality (MR) for its joint creation by multiple sculptors and used latest Augmented Reality (AR) technology to guide manual fabrication actions. It was built at the Chinese University of Hong Kong in the fall of 2019 by thirty participants of a design-and-build workshop on the integration of AR in construction. As part of its construction workflow, holographic setups were created on multiple devices, including a series of Microsoft HoloLenses and several handheld Smartphones, all linked simultaneously to a single digital base model to interactively guide the manufacturing process. This paper critically evaluates the experience of extending recent AR and MR tool developments towards applications that centre on creative collaborative production. Using ARgan as a demonstrator project, its developed workflow is assessed on its ability to transform a geometrically complex digitally drafted design to its final physically built form, highlighting the necessary strategic integration of variability as an opportunity to relax notions on design precision and exact control. The paper concludes with a plea for digital technology's ability to stimulate dialogue and collaboration in creative production and augment craftsmanship, thus providing greater agency and more diverse design output.
keywords	Augmented-Reality; Mixed-Reality; Post-digital; High-tech vs low-tech; Bamboo
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2020_107
id	ecaade2020_107
authors	Hashimoto, Jason and Park, Hyoung-June
year	2020
title	Dance with Shadows - Capturing tacit knowledge with smart device augmented reality (SDAR)
doi	https://doi.org/10.52842/conf.ecaade.2020.2.165
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 165-172
summary	Tacit knowledge has been notified with its involvement in the creative and innovative process of design. However, it has been an elusive subject due to its difficulty to be articulated, recorded, and communicated. Augmented Reality (AR) is introduced as an affordable, accessible, and collaborative way to revisit tacit knowledge in the design process. In this paper, a computational design approach with Smart Device Augmented Reality (SDAR) is proposed for a real-time fenestration design in a targeted room. In comparison to standard methods of showcasing daylighting metrics, the use of Smart Device Augmented Reality (SDAR) is an alternative method as it delivers a dynamic experience by combining both the real and digital environments, enabling the visualization of the design in its intended site context with real-time feedback. The implementation of the proposed approach is explained and the design process with SDAR is also demonstrated in this paper.
keywords	tacit knowledge; augmented reality; simulation; real-time feedback
series	eCAADe
email
last changed	2022/06/07 07:49

_id	ecaade2021_067
id	ecaade2021_067
authors	Weissenböck, Renate
year	2021
title	Augmented Quarantine - An experiment in online teaching using augmented reality for customized design interventions
doi	https://doi.org/10.52842/conf.ecaade.2021.2.095
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 95-104
summary	This paper presents experimental research about using Augmented Reality (AR) for interactive design processes, exploring a spatial "live" design method taking place in an overlay of real space and digital models. It discusses the processes and outcomes of a seminar undertaken at Graz University of Technology in winter term 2020/2021. Due to the Covid-19 pandemic, the course was taught online, and conceptualized to allow students the biggest possible learning experience during the lockdown. Ensuring accessibility to all participants, the seminar was based on the use of ubiquitous devices. The implementation of newly developed software, such as "Fologram", enabled the students to use AR systems at home with their personal computers and smartphones. The task of the course was to design customized interventions for the students' own domestic spaces, reacting to changing conditions and needs during the lockdown. The employed workflow was driven by an instant connection between 3D-modeling (Rhinoceros3D), parametric design (Grasshopper) and holographic immersion (Fologram).
keywords	augmented reality; remote collaboration; interactive design; customization; online teaching
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cdrf2019_265
id	cdrf2019_265
authors	Yue Qi, Ruqing Zhong, Benjamin Kaiser, Long Nguyen,Hans Jakob Wagner, Alexander Verl, and Achim Menges
year	2020
title	Working with Uncertainties: An Adaptive Fabrication Workflow for Bamboo Structures
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_25
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
summary	This paper presents and investigates a cyber-physical fabrication work-flow, which can respond to the deviations between built- and designed form in realtime with vision augmentation. We apply this method for large scale structures built from natural bamboo poles. Raw bamboo poles obtain evolutionarily optimized fibrous layouts ideally suitable for lightweight and sustainable building construction. Nevertheless, their intrinsically imprecise geometries pose a challenge for reliable, automated construction processes. Despite recent digital advancements, building with bamboo poles is still a labor-intensive task and restricted to building typologies where accuracy is of minor importance. The integration of structural bamboo poles with other building layers is often limited by tolerance issues at the interfaces, especially for large scale structures where deviations accumulate incrementally. To address these challenges, an adaptive fabrication process is developed, in which existing deviations can be compensated by changing the geometry of subsequent joints to iteratively correct the pose of further elements. A vision-based sensing system is employed to three-dimensionally scan the bamboo elements before and during construction. Computer vision algorithms are used to process and interpret the sensory data. The updated conditions are streamed to the computational model which computes tailor-made bending stiff joint geometries that can then be directly fabricated on-the-fly. In this paper, we contextualize our research and investigate the performance domains of the proposed workflow through initial fabrication tests. Several application scenarios are further proposed for full scale vision-augmented bamboo construction systems.
series	cdrf
email
last changed	2022/09/29 07:51

_id	cdrf2019_46
id	cdrf2019_46
authors	Adam Chernick, Christopher Morse, Steve London, Tim Li, David Ménard, John Cerone, and Gregg Pasquarelli
year	2020
title	On-Site BIM-Enabled Augmented Reality for Construction
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_5
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
summary	We describe a prototype system for communicating building information and models directly to on-site general contractors and subcontractors. The system, developed by SHoP Architects, consists of a workflow of pre-processing information within Revit, post-processing information outside of Revit, combining data flows inside of a custom application built on top of Unity Reflect, and delivering the information through a mobile application on site with an intuitive user interface. This system incorporates augmented reality in combination with a dashboard of documentation views categorized by building element.
series	cdrf
email
last changed	2022/09/29 07:51

_id	caadria2020_137
id	caadria2020_137
authors	Xu, Qiaoliang, Brown, Andre, Moleta, Tane, Schnabel, Marc Aurel and Rogers, Maria
year	2020
title	Inhabiting 'Prosperous Suzhou' through Smart VR - Interrogating an Ancient Artwork and Documents to manifest Tangible and Intangible Heritage
doi	https://doi.org/10.52842/conf.caadria.2020.2.173
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 173-182
summary	The research investigates digital landscape heritage. It focuses on the application of Virtual Reality (VR) in a game engine. The aim is to aid the understanding and interpretation of ancient principles relating to sensitive and appropriate interaction of the built form and its associated landscape. The principles have at their root harmony of human inhabitation, the built forms and the landscape they are surrounded. This understanding can lead to re-application within a contemporary context, and the VR environment has the potential to augment and enrich it. For the first time ever, the research has reinterpreted a classical depiction of Suzhou, in an 18th-century handscroll painting, into a three-dimensional immersive virtual environment. It proposes that VR can be a way to experience and increase understanding of heritage landscapes; in our case one that now only exists in an ancient idealised painting. The reinterpretation aims to enhance the users' experience and understanding of the Tangible and Intangible Cultural Heritage. The spatialised scene is augmented through the integration of other historical information, such as poems and travel notes, to embed intangible aspects into the gardens and landscapes.
keywords	Digital Heritage; Cultural Landscape; Painting Reinterpretation; Immersive Environments; Virtual Reality
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	sigradi2020_577
id	sigradi2020_577
authors	Appendino, María José; Carboni, Lucía; Tosello, María Elena
year	2020
title	Design of a Virtual Reality device to motivate experiences of meaningful learning
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 577-585
summary	With the increasing popularization of technologies such as Augmented Reality -AR- and Virtual Reality -VR-, interest aroused in studying the incorporation of these media into design disciplines higher education. The main objective of this investigation was to integrate VR and AR into the lessons, in order to motivate a meaningful learning process for students. The project was developed for a subject corresponding to the first year of the university careers of Architecture, Visual Design, and Industrial Design. This device was effectively implemented for the dictation of virtual classes, in the context of the COVID-19 pandemic.
keywords	Virtual Tour, Design Education, Emerging Technologies
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	ecaade2020_499
id	ecaade2020_499
authors	Ashour, Ziad and Yan, Wei
year	2020
title	BIM-Powered Augmented Reality for Advancing Human-Building Interaction
doi	https://doi.org/10.52842/conf.ecaade.2020.1.169
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 169-178
summary	The shift from computer-aided design (CAD) to building information modeling (BIM) has made the adoption of augmented reality (AR) promising in the field of architecture, engineering and construction. Despite the potential of AR in this field, the industry and professionals have still not fully adopted it due to registration and tracking limitations and visual occlusions in dynamic environments. We propose our first prototype (BIMxAR), which utilizes existing buildings' semantically rich BIM models and contextually aligns geometrical and non-geometrical information with the physical buildings. The proposed prototype aims to solve registration and tracking issues in dynamic environments by utilizing tracking and motion sensors already available in many mobile phones and tablets. The experiment results indicate that the system can support BIM and physical building registration in outdoor and part of indoor environments, but cannot maintain accurate alignment indoor when relying only on a device's motion sensors. Therefore, additional computer vision and AI (deep learning) functions need to be integrated into the system to enhance AR model registration in the future.
keywords	Augmented Reality; BIM; BIM-enabled AR; GPS; Human-Building Interactions; Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cdrf2019_57
id	cdrf2019_57
authors	Caitlyn Parry and Sean Guy
year	2020
title	Recycling Construction Waste Material with the Use of AR
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_6
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
summary	This paper aims to present a methodology for reusing and recycling scrap timber from building sites using augmented reality and flexible digital models. The project we present describes a process that enables existing material to be reused and repurposed such that the designed model is updated by the digital inventory of digitised offcuts/waste elements.
series	cdrf
email
last changed	2022/09/29 07:51

_id	ecaade2022_368
id	ecaade2022_368
authors	Das, Avishek, Brunsgaard, Camilla and Madsen, Claus Brondgaard
year	2022
title	Understanding the AR-VR Based Architectural Design Workflow among Selected Danish Architecture Practices
doi	https://doi.org/10.52842/conf.ecaade.2022.1.381
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 381–388
summary	Virtual reality (VR) and augmented reality (AR) have been proposed to be additional architectural design mediums for at least 25 years (Dagit, 1993). Despite rapid technical and technological development, it has not been adopted into architectural design practices as compared to academia and research. Surveys from the American Institute of Architects (AIA) and Royal Institutes of British Architects (RIBA) demonstrate the state of architectural practices; 72% of architects and 65% of architects respectively are not using any kind of virtual, augmented, or mixed reality in their practices(RIBA and Microsoft, 2018; Hampson, 2020). In this paper, the authors investigate the state of practices, issues, challenges, and opportunities of the utilization of virtual, augmented, and mixed realities in six architectural practices in the Danish context. Three of the practices are large architectural practices, one medium-sized practice specializing in institutional, healthcare and cultural architecture, and one firm designing private family houses, kindergartens, daycares and places for people with disability and, one experimental design studio. All these practices have used VR/AR in their projects to various degrees. In recent years Danish architectural practices have been involved in various VR/AR-based exhibitions, demonstrations, and tool developments to promote the usage of the same in design practice. Through a set of qualitative interviews with personnel from key architectural practices, the authors would like to demonstrate the present state of practices. The investigation explores the usage of VR and AR in Danish architecture practices by identifying challenges and opportunities regarding skill levels, architectural typology, use cases, toolchains, and workflow and shows similarities and differences between traditional and VR-based design processes. The main findings show how VR/AR-based visualization helps architects to perceive spatiality and also ushers creativity through immersion and overlays.
keywords	Virtual Reality, Augmented Reality, Architectural Design Practice, Denmark
series	eCAADe
email
last changed	2024/04/22 07:10

_id	acadia20_220p
id	acadia20_220p
authors	Rieger, Uwe; Liu, Yinan
year	2020
title	LightWing II
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 220-225
summary	LightWing II is an immersive XR installation that explores hybrid design strategies equally addressing physical and digital design parameters. The interactive project links a kinetic structure with dynamic digital information in the form of 3D projected imagery and spatial sound. A key component of the project was the development of a new rendering principle that allows the accurate projection of stereoscopic images on a moving target screen. Using simple red/cyan cardboard glasses, the system expands the applications of contemporary AR headsets beyond an isolated viewing towards a communal multi-viewer event. LightWing`s construction consists of thin flexible carbon fibre rods used to tension an almost invisible mesh screen. The structure is asymmetrically balanced on a single pin joint and monitored by an IMU. A light touch sets the delicate wing-like object into a rotational oscillation. As a ‘hands-on’ experience, LightWing II creates a mysterious sensation of tactile data and enables the user to navigate through holographic narratives assembled in four scenes, including the interaction with swarms of three winged creatures, being immersed in a silky bubble, and a journey through a velvet wormhole. The user interface is dissolved through the direct linkage between the physical construction and the dynamic digital content. The project was developed at the arc/sec Lab at the University of Auckland. The Lab explores user responsive constructions where dynamic properties of the virtual world influence the material world and vice versa. The Lab’s vision is to re-connect the intangible computer world to the multisensory qualities of architecture and urban spaces. With a focus on intuitive forms of user interaction, the arc/sec Lab uses large-scale prototypes and installations as the driving method for both the development and the demonstration of new cyber-physical design principles.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	ecaade2020_030
id	ecaade2020_030
authors	Song, Yang
year	2020
title	BloomShell - Augmented Reality for the assembly and real-time modification of complex curved structure
doi	https://doi.org/10.52842/conf.ecaade.2020.1.345
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 345-354
summary	Augmented Reality (AR) as a new technical tool has developed rapidly in the last few years and has now the potential of bridging the gap between holographic drawings and the real world. This paper addresses whether AR can guide unskilled labour on complex structure assembly and fabrication process. It contains three experiments developed with AR. The research aims to prove that with intuitive holographic instructions, AR helps to reduce the time spent in comparing 2D drawings to the real site during the assembly process, and therefore offers possibilities to improve the construction efficiency significantly. The research also paves the way for shell structures, considering the latest technology such as AR and AI, and gives emphasis on the communication between computer and human during the fabrication process through the physical model. It is an exploration of how people might change their mind or decisions can be changed in a real-time manner harmoniously using AI through AR.
keywords	Augmented Reality; complex curved structure assembly; real-time modification; holographic instruction; HoloLens; Artificial Intelligence
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2020_542
id	ecaade2020_542
authors	Brown, Andre, Liu, Yisi, Webb, Nicholas and Knight, Mike
year	2020
title	Interpreting and exploiting narrative as a sketch design generator for application in VE
doi	https://doi.org/10.52842/conf.ecaade.2020.1.449
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 449-458
summary	The research in this paper focusses on how a narrative text can be the generator of an architectural drawing, or other architectural representation, such as an Architectural Virtual Environment. The drawn physical sketch has traditionally played that role. A particular approach to narrative has been important for some notable architects and their architecture. Ian Ritchie (2014), for instance, celebrates the use of poetry to describe the essential spirit of a scheme before any drawing is done. The work in the paper here describes the proposition to capture such narrative text in a systematic and structured way. We describe foundational work on how the captured narrative text has been translated into a contemporary, computer-mediated, design development environment. Different narrative accounts recalling a now demolished house form the focus case study. This case study is the vehicle through which the initial principles establishing how best to move from narrative to virtual representation are established and tested.
keywords	virtual environment; narrative; sketch; virtual reality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2020_128
id	caadria2020_128
authors	Chen, Zi-Ru
year	2020
title	The Guidance System of Gamification and Augmented Reality in a Museum Space
doi	https://doi.org/10.52842/conf.caadria.2020.1.671
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 671-680
summary	Gamification is the application of game-oriented design approaches or game-inspired mechanics to otherwise non-game contexts. Mobile guiding system is the design process of information interactions. It is the integration of information design, interaction design, and sensorial design. The e-learning system of mobile guide is able to be loaded gamification concepts and let mobile learning interestingly, diversely, and validly. The problem of the research was if we combined the concept of gamification design into museum guide services with augmented reality for non-commercial purposes, it also provided the same benefits to the promotion of museum learning and knowledge, integrating mobile devices as navigation media. It would improve more users to participate in a museum and use the guide system actively, and then arise their interest and achievement. The result was to establish a preliminary model for developing a museum mobile guide system of gamification design and augmented reality.
keywords	Gamification; Museum Learning; Multimedia Guided System; Augmented Reality
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2020_517
id	ecaade2020_517
authors	Lharchi, Ayoub, Ramsgaard Thomsen, Mette and Tamke, Martin
year	2020
title	Connected Augmented Assembly - Cloud based Augmented Reality applications in architecture
doi	https://doi.org/10.52842/conf.ecaade.2020.1.179
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 179-186
summary	Current design practices rely on a set of computational tools to simulate and optimize the design in regards to questions concerning architecture, engineering, and construction. However, little progress has been made in tools related to the design and execution of a building assembly. This paper aims to present an integrated procedure that targets the assembly of complex structures. Two challenges are identified and addressed: first, the necessity of a connected design environment where multiple stakeholders can communicate, modify, and give feedback on the assembly sequence. Second, the instructions for the assembly of structures to untrained users. The suggested method is based on the Assembly Information Modeling framework, which provides a general approach to generate assembly information from CAD data and utilizes AEC cloud platforms as a base for communication and Augmented Reality devices as a Human Machine Interface. Ultimately, both cases are combined to constitute Connected Augmented Assembly, a bidirectional approach to assembly design, review, and execution.
keywords	assembly sequence; augmented reality; assisted assembly; cloud aec; assembly information modeling
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2020_799
id	sigradi2020_799
authors	Martini, Sebastián; Chiarella, Mauro
year	2020
title	Reactive devices. Maker experience as a form of pedagogical innovation in formation of industrial designers
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 799-807
summary	In this presentation, the reflections about the application of an innovative cathedra experience for the formation of industrial designers will be exposed. It revolved around the development of what the cathedra team defines as "reactive devices", highlighting the role of the design into an educational proposal that is based on the principles of Maker culture. In this experience converge knowledge from different areas of knowledge, through a synergy of conventional and disruptive technologies that allow novel approaches of capture, analyze and understanding of the reality in the searching of a design for the transformation.
keywords	Maker culture, PBL, Curriculum, Interdisciplinary, Digital fabrication
series	SIGraDi
email
last changed	2021/07/16 11:53

_id	sigradi2020_555
id	sigradi2020_555
authors	Pazmino, Ana Veronica
year	2020
title	App for analysis and development of products with environmental quality
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 555-562
summary	The research aims to demystify the term ecological or green products so that they are applied with adequate conceptual bases. Currently, there is a large number of products called sustainable, ecological or green, when in reality they are only recyclable, reusable products, or that use recycled materials. This article presents the theoretical foundation of design guidelines for the environment, and shows the suitability tool for analyzing sustainable products and assisting in the development of products with environmental quality in an application that makes the process of applying guidelines for faster and easier environmental product design for use by designers.
keywords	Design and sustainability, Project guidelines, Environment, Tool
series	SIGraDi
email
last changed	2021/07/16 11:52

For more results click below: