Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 670

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2020_991
id	sigradi2020_991
authors	Gomez, Paula; Hadi, Khatereh; Kemenova, Olga; Swarts, Matthew
year	2020
title	Spatiotemporal Modeling of COVID-19 Spread in Built Environments
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 991-996
summary	This research proposes a Spatiotemporal Modeling approach to understand the role of architecture, specifically the built environment, in the COVID-19 pandemic. The model integrates spatial and temporal parameters to calculate the probability of spread of and exposure to SARS-CoV-2 virus (responsible of COVID-19 disease) due to the combination of four aspects: Spatial configuration, organizational schedules, people’s behavior, and virus characteristics. Spatiotemporal Modeling builds upon the current models of building analytics for architecture combined with predictive models of COVID-19 spread. While most of the current research on COVID-19 spread focuses on mathematical models at regional scales and the CDC guidelines emphasizing on human behavior, our research focuses on the role of buildings in this pandemic, as the intermediate mechanism where human and social activities occur. The goal is to understand the most significant parameters that influence the virus spread within built environments, including human-to-human, fomite (surface-to-human), and airborne ways of transmission, with the purpose of providing a comprehensive parametric model that may help identify the most influential design and organizational decisions for controlling the pandemic. The proof-of-concept study is a healthcare facility.
keywords	Spatiotemporal modeling, Agent-based simulation, COVID-19, Virus spread, Built environments, Human behavior, Social distancing
series	SIGraDi
email
last changed	2021/07/16 11:53

_id	acadia20_574
id	acadia20_574
authors	Nguyen, John; Peters, Brady
year	2020
title	Computational Fluid Dynamics in Building Design Practice
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 574-583.
doi	https://doi.org/10.52842/conf.acadia.2020.1.574
summary	This paper provides a state-of-the-art of computational fluid dynamics (CFD) in the building industry. Two methods were used to find this new knowledge: a series of interviews with leading architecture, engineering, and software professionals; and a series of tests in which CFD software was evaluated using comparable criteria. The paper reports findings in technology, workflows, projects, current unmet needs, and future directions. In buildings, airflow is fundamental for heating and cooling, as well as occupant comfort and productivity. Despite its importance, the design of airflow systems is outside the realm of much of architectural design practice; but with advances in digital tools, it is now possible for architects to integrate air flow into their building design workflows (Peters and Peters 2018). As Chen (2009) states, “In order to regulate the indoor air parameters, it is essential to have suitable tools to predict ventilation performance in buildings.” By enabling scientific data to be conveyed in a visual process that provides useful analytical information to designers (Hartog and Koutamanis 2000), computer performance simulations have opened up new territories for design “by introducing environments in which we can manipulate and observe” (Kaijima et al. 2013). Beyond comfort and productivity, in recent months it has emerged that air flow may also be a matter of life and death. With the current global pandemic of SARS-CoV-2, it is indoor environments where infections most often happen (Qian et al. 2020). To design architecture in a post-COVID-19 environment will require an in-depth understanding of how air flows through space.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	sigradi2021_354
id	sigradi2021_354
authors	Ferreira, Julio César and Ferreira, Claudio Lima
year	2021
title	Emotion, Cognition, and The Practice of Teaching Architectural Design
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 435–450
summary	From the view of concepts related to emotions and feelings treated in the field of cognitive - behavioral neuroscience and its relation with the teaching-learning processes, this paper searches to analyze educational strategies that can contribute to the field of emergency synchronous remote teaching architectural design. Methodologically, the bibliographical research of exploratory nature is related to an experience of investigation about pedagogical methods of teaching architectural design in a postgraduate course, developed, in the second semester of 2020, during the period of emergency synchronous remote teaching due to the SARS-Cov-2 coronavirus.We seek to comprehend the benefits and limits of remote emergency teaching practices of architectural design, looking at factors such as emotions and feelings as important mediation tools on teaching-learning processes.
keywords	Neurociencias, Fatores emocionais, Cogniçao em projeto, Ensino-aprendizado de projeto de arquitetura, Pensamento complexo.
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	cdrf2019_245
id	cdrf2019_245
authors	Dan Liang
year	2020
title	A Generative Material System of Clay Components-The Porosity Language
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_23
summary	Compared with the pre-determined architecture design based on standard elements, the underlying structure of nature is more like a complex system. Porosity language, for example, which is inspired by nature, has been widely applied in the architecture context. Through the analysis of the underlying methodologies of topology in each case, the strategy is to illustrate how clay components can achieve this natural porosity language. With the help of parametric topology, the report will clearly show how the innovative language of clay components is inspired, optimized and applied. As the background of the literature, natural porosity and examples of existing cavity wall made by clay components will be compared and analyzed in Sect. 1. In Sect. 2, Steven Hall’s porous methodology will be considered as the primary topological reference. The parametric iteration topology will be stated explicitly in Sect. 3, which will direct the randomness of porosity form to the balance between structural stability and the aesthetic value. In the last chapter, different architecture applications will be studied through the supporting of micro-climate simulation.
series	cdrf
email
last changed	2022/09/29 07:51

_id	ecaade2020_267
id	ecaade2020_267
authors	Argin, Gorsev, Pak, Burak and Turkoglu, Handan
year	2020
title	Through the Eyes of (Post-)Flâneurs - Altering rhythm and visual attention in public space in the era of smartphones
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 239-248
doi	https://doi.org/10.52842/conf.ecaade.2020.1.239
summary	In the last decade, rapid penetration of smartphones into our everyday life introduced a new kind of urban wanderer named as the 'post-flâneur'. By navigating through the virtual and physical space with a smartphone, and taking and sharing photographs, post-flâneur walks and experiences the city in novel ways. This paper aims to investigate the effects of smartphone use on the human-environment relationship by comparing post-flânerie with flânerie in public space with a focus on two key indicators: alteration of 1) the visual attention and 2) the walking rhythm. In this regard, ten postgraduate Architecture students are asked to perform flânerie and post-flânerie consecutively in the historical city center of Ghent with an eye-tracker and a smartphone. During the flânerie condition, they walked and experienced the city without using a smartphone. In the post-flânerie condition, they used a smartphone, took pictures and uploaded them to an application. By analyzing the eye-tracker (number and duration of fixations) and the smartphone (location data and geolocated photographs) data, altering rhythm and visual attention during the flânerie and post-flânerie were compared. Preliminary results indicate that flânerie and post-flânerie differ in terms of rhythm and visual attention. The average duration of fixations on the environment were significantly lower in the post-flânerie condition while the average walking rhythm was faster but impeded from time to time. In addition, post-flâneurs' visual attention was on the smartphone during a significant part of the stationary activities which point out to an altered state of public space appropriation. The findings are significant because they reveal the novel spatial appropriations and experiences of the (post)public space -particularly "the honeypot effect" which was more significant in the post-flânerie condition. These observations evoke questions on how designers can rethink public space as a hybrid construct integrating the virtual and the physical.
keywords	post-flâneur; rhythm; visual attention; smartphone; eye-tracking
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2020_783
id	sigradi2020_783
authors	Asevedo, Laíze Fernandes de; Medeiros, Deisyanne Câmara A. de; Barbosa, Gabriele Mislaine; Silva, Marylia Ketyllee
year	2020
title	Parametric modeling as a supporting tool for teaching in a technical drawing course
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 783-790
summary	Despite the complexity of parametric modeling, used potentially to generate non-standard geometries, this paper presents a simple approach to adopt this tool as a support for teaching technical drawing contents. This experimental study was applied in a technical and high school education context, focusing on three subjects: 1) irregular polyhedra, 2) points in descriptive geometry, and 3) line in descriptive geometry. Exercises were implemented before and after the parametric experience with students, and the answers to both scenarios were compared. The results addressed to the efficiency of parametric modeling as a supporting tool in the teaching/learning process.
keywords	Parametric modeling, Didactic experiment, Technical drawing course, Irregular polyhedra, Descriptive geometry
series	SIGraDi
email
last changed	2021/07/16 11:53

_id	ecaade2021_011
id	ecaade2021_011
authors	Nováková, Kateøina and Vele, Jiøí
year	2021
title	Prvok - An experiment with 3D printing large doublecurved concrete structure
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 137-144
doi	https://doi.org/10.52842/conf.ecaade.2021.2.137
summary	In this experimental research project we report on the manufacturing process of the first full-size 3D printed concrete structure in our country. The house was 3D printed by an ABB IRB 6700 robot whose range we made fit with the requirements for transportation size and also, its range determined the size and geometry of the house. During the transformation process from sketch to code we involved students to apply computational design methods. We designed the main load bearing structure which had to be thinnest and lightest possible together with its insulation features and printability. We were aware of the world-wide research in this field started by NASA centennial Challenge called 3D-printed-habitat [Roman,2020] as well as start-ups derived from this research [1,2,3,4]. During the project, we investigated the following matters: (1) the relationship between geometry of the wall in model and in practice (2), setting of the robot and the mixture; and (3) stress test of the wall. With the results of the test we aimed at contribution to standardisation of 3D printed structures in ISO/ASTM 52939:2021. The finalized structure, named "Prvok", was made to prove printability of the mixture and stability of the design.
keywords	3D printing; robot; concrete; grasshopper; experiment; house
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2020_137
id	ecaade2020_137
authors	Webb, Nicholas, Hillson, James, Peterson, John Robert, Buchanan, Alexandrina and Duffy, Sarah
year	2020
title	Documentation and Analysis of a Medieval Tracing Floor Using Photogrammetry, Reflectance Transformation Imaging and Laser Scanning
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 209-218
doi	https://doi.org/10.52842/conf.ecaade.2020.2.209
summary	The fifteenth-century tracing floor at Wells cathedral is an extremely rare survival in European architecture. Located in the roof space above the north porch, this plaster floor was used as a drawing and design tool by medieval masons, the lines and arcs inscribed into its surface enabling them to explore their ideas on a 1:1 scale. Many of these marks are difficult to see with the naked eye and existing studies of its geometry are reliant on manual retracing of its lines. This paper showcases the potential of digital surveying and analytical tools, namely photogrammetry, reflectance transformation imaging (RTI) and laser scanning, to extend our knowledge of the tracing floor and its use in the cathedral. It begins by comparing the recording processes and outputs of all three techniques, followed by a description of the digital retracing of the tracing floor to highlight lines and arcs on the surface. Finally, it compares these with digital surveys of the architecture of the cathedral cloister.
keywords	digital heritage; photogrammetry; reflectance transformation imaging; laser scanning; medieval design
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2020_281
id	caadria2020_281
authors	Abdelmohsen, Sherif and Hassab, Ahmed
year	2020
title	A Computational Approach for the Mass Customization of Materially Informed Double Curved A Computational Approach for the Mass Customization of Materially Informed Double Curved Façade Panels
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 163-172
doi	https://doi.org/10.52842/conf.caadria.2020.1.163
summary	Despite recent approaches to enable the mass customization of double curved faÃ§ade panels, there still exist challenges including waste reduction, accuracy, surface continuity, economic feasibility, and workflow disintegration. This paper proposes a computational approach for the design and fabrication of materially informed double curved faÃ§ade panels with complex geometry. This approach proposes an optimized workflow to generate customizable double curved panels with complex geometry and different material properties, and optimize fabrication workflow for waste reduction. This workflow is applied to four different fabrication techniques: (1) vacuum forming, (2) clay extrusion, (3) sectioning, and (4) tessellation. Four experiments are introduced to apply surface rationalization and optimization using Rhino and Grasshopper scripting. Upon simulating each of the four design-to-fabrication techniques through different iterations, the experiment results demonstrated how the proposed workflows produced optimized surfaces with higher levels of accuracy and reduced waste material, customized per type of material and surface complexity.
keywords	Digital fabrication; Double curved facades; Mass customization; Design-to-fabrication
series	CAADRIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia20_516
id	acadia20_516
authors	Aghaei Meibodi, Mania; Voltl, Christopher; Craney, Ryan
year	2020
title	Additive Thermoplastic Formwork for Freeform Concrete Columns
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 516-525.
doi	https://doi.org/10.52842/conf.acadia.2020.1.516
summary	The degree of geometric complexity a concrete element can assume is directly linked to our ability to fabricate its formwork. Additive manufacturing allows fabrication of freeform formwork and expands the design possibilities for concrete elements. In particular, fused deposition modeling (FDM) 3D printing of thermoplastic is a useful method of formwork fabrication due to the lightweight properties of the resulting formwork and the accessibility of FDM 3D printing technology. The research in this area is in early stages of development, including several existing efforts examining the 3D printing of a single material for formwork— including two medium-scale projects using PLA and PVA. However, the performance of 3D printed formwork and its geometric complexity varies, depending on the material used for 3D printing the formwork. To expand the existing research, this paper reviews the opportunities and challenges of using 3D printed thermoplastic formwork for fabricating custom concrete elements using multiple thermoplastic materials. This research cross-references and investigates PLA, PVA, PETG, and the combination of PLA-PVA as formwork material, through the design and fabrication of nonstandard structural concrete columns. The formwork was produced using robotic pellet extrusion and filament-based 3D printing. A series of case studies showcase the increased geometric freedom achievable in formwork when 3D printing with multiple materials. They investigate the potential variations in fabrication methods and their print characteristics when using different 3D printing technologies and printing materials. Additionally, the research compares speed, cost, geometric freedom, and surface resolution.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2020_064
id	ecaade2020_064
authors	Agirbas, Asli
year	2020
title	Building Energy Performance of Complex Forms - Test simulation of minimal surface-based form optimization
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 259-268
doi	https://doi.org/10.52842/conf.ecaade.2020.1.259
summary	Many optimization tools are developed in line with the form-energy relationship to ensure energy efficiency in buildings. However, such studies with complex forms are very limited. Therefore, the MSO-2 model was developed. In this model, on the roof of the conceptual form, minimal surface is used, thus complex forms can be created. In this model, the conceptual form can be optimized (for one day) according to these objectives: increasing daylight in the space with maximum value limitation, reducing radiation on the roof, and enlarging floor surface area of the conceptual form with minimum value limitation. A test simulation was performed with this model. Thus, in order to find the most optimized form in multi-objective optimization, more generations could be produced in a short time and optimized conceptual forms, which were produced, could be tested for energy efficiency.
keywords	Multi-Objective Optimization; Radiation Analysis; Building energy performance; Daylighting Analysis
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2020_390
id	ecaade2020_390
authors	Ahmadzadeh Bazzaz, Siamak, Fioravanti, Antonio and Coraglia, Ugo Maria
year	2020
title	Depth and Distance Perceptions within Virtual Reality Environments - A Comparison between HMDs and CAVEs in Architectural Design
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 375-382
doi	https://doi.org/10.52842/conf.ecaade.2020.1.375
summary	The Perceptions of Depth and Distance are considered as two of the most important factors in Virtual Reality Environments, as these environments inevitability impact the perception of the virtual content compared with the one of real world. Many studies on depth and distance perceptions in a virtual environment exist. Most of them were conducted using Head-Mounted Displays (HMDs) and less with large screen displays such as those of Cave Automatic Virtual Environments (CAVEs). In this paper, we make a comparison between the different aspects of perception in the architectural environment between CAVE systems and HMD. This paper clarifies the Virtual Object as an entity in a VE and also the pros and cons of using CAVEs and HMDs are explained. Eventually, just a first survey of the planned case study of the artificial port of the Trajan emperor near Fiumicino has been done as for COVID-19 an on-field experimentation could not have been performed.
keywords	Visual Perception; Depth and Distance Perception; Virtual Reality; HMD; CAVE; Trajan’s port
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2021_142
id	ascaad2021_142
authors	Bakir, Ramy; Sara Alsaadani, Sherif Abdelmohsen
year	2021
title	Student Experiences of Online Design Education Post COVID-19: A Mixed Methods Study
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 142-155
summary	This paper presents findings of a survey conducted to assess students’ experiences within the online instruction stage of their architectural education during the lockdown period caused by the COVID-19 pandemic between March and June 2020. The study was conducted in two departments of architecture in both Cairo branches of the Arab Academy for Science, Technology & Maritime Transport (AASTMT), Egypt, with special focus on courses involving a CAAD component. The objective of this exploratory study was to understand students’ learning experiences within the online period, and to investigate challenges facing architectural education. A mixed methods study was used, where a questionnaire-based survey was developed to gather qualitative and quantitative data based on the opinions of a sample of students from both departments. Findings focus on the qualitative component to describe students’ experiences, with quantitative data used for triangulation purposes. Results underline students’ positive learning experiences and challenges faced. Insights regarding digital tool preferences were also revealed. Findings are not only significant in understanding an important event that caused remote architectural education in Egypt but may also serve as an important stepping-stone towards the future of design education in light of newly-introduced disruptive online learning technologies made necessary in response to lockdowns worldwide
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	caadria2020_258
id	caadria2020_258
authors	Beatricia, Beatricia, Indraprastha, Aswin and Koerniawan, M. Donny
year	2020
title	Revisiting Packing Algorithm - A Strategy for Optimum Net-to Gross Office Design
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 405-414
doi	https://doi.org/10.52842/conf.caadria.2020.1.405
summary	Net-to-gross efficiency is defined as the ratio of net area to a gross area of a building. Net-to-gross efficiency will determine the quantity of leasable building area. On the other side, the effectiveness of the spatial distribution of a floor plan design must follow the value of net-to-gross efficiency. Therefore in the context of office design, there are two challenges need to be improved: 1) to get an optimum value of efficiency, architects need to assign the amount and size of the office units which can be effectively arranged, and 2) to fulfill high net-to-gross efficiency value that usually set out at minimal 85%. This paper aims to apply the packing algorithm as a strategy to achieve optimum net-to-gross efficiency and generating spatial configuration of office units that fit with the result. Our study experimented with series of models and simulations consisting of three stages that start from finding net-to-gross efficiency, defining office unit profiles based on preferable office space units, and applying the packing algorithm to get an optimum office net-to-gross efficiency. Computational processes using physics engine and optimization solvers have been utilized to generate design layouts that have minimal spatial residues, hence increasing the net-to-gross ratio.
keywords	net-to-gross efficiency; packing algorithm; modular office area; area optimization;
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2020_240
id	ecaade2020_240
authors	Bouza, Hayley and Aºut, Serdar
year	2020
title	Advancing Reed-Based Architecture through Circular Digital Fabrication
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 117-126
doi	https://doi.org/10.52842/conf.ecaade.2020.1.117
summary	This paper presents a completed research project that proposes a new approach for creating circular buildings through the use of biodegradable, in situ resources with the help of computational design and digital fabrication technologies. Common Reed (Phragmites Australis) is an abundantly available natural material found throughout the world. Reed is typically used for thatch roofing in Europe, providing insulation and a weather-tight surface. Elsewhere, traditional techniques of weaving and bundling reeds have long been used to create entire buildings. The use of a digital production chain was explored as a means towards expanding the potential of reed as a sustainable, locally produced, construction material. Following an iterative process of designing from the micro to the macro scale and by experimenting with robotic assembly, the result is a reed-based system in the form of discrete components that can be configured to create a variety of structures.
keywords	Phragmites Australis; Reed; Discrete Design; Robotic Assembly; Circular Design; Biodegradable Architecture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2020_159
id	ecaade2020_159
authors	Chéraud, Florian
year	2020
title	Beyond Design Freedom - Providing a Set-up for Material Modelling Within Kangaroo Physics
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 459-468
doi	https://doi.org/10.52842/conf.ecaade.2020.1.459
summary	Kangaroo Physics, a physical simulation engine, is amongst the most used form-finding tool with nearly 500 000 downloads. Mostly resorted to by users with moderate computation skills, it provides a simplified interface for an advanced simulation tool. It is a Particle Spring System relying on the Dynamic Relaxation method and offering a wide design space. Thanks to the visual scripting interface provided by Grasshopper, the user has access to a fixed set of physical "goals" and unitless variables, without having to work with more complex aspects of the Kangaroo physical model. This setup induces a disconnection between the user and the physical model with its variables. The goal of this research is to introduce, within the Grasshopper environment, a tensile parameter, the Young Modulus, into the Kangaroo model. Thus, while preserving the design freedom of the plug-in, a better understanding of the physical behaviour modelled in Kangaroo is offered to neophytes, as well as better control of material properties.
keywords	Kangaroo Physics; Tensile Parameter; Form-Finding; User Control
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2021_257
id	ecaade2021_257
authors	Cichocka, Judyta Maria, Loj, Szymon and Wloczyk, Marta Magdalena
year	2021
title	A Method for Generating Regular Grid Configurations on Free-From Surfaces for Structurally Sound Geodesic Gridshells
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 493-502
doi	https://doi.org/10.52842/conf.ecaade.2021.2.493
summary	Gridshells are highly efficient, lightweight structures which can span long distances with minimal use of material (Vassallo & Malek 2017). One of the most promising and novel categories of gridshells are bending-active (elastic) systems (Lienhard & Gengnagel 2018), which are composed of flexible members (Kuijenhoven & Hoogenboom 2012). Timber elastic gridshells can be site-sprung or sequentially erected (geodesic). While a lot of research focus is on the site-sprung ones, the methods for design of sequentially-erected geodesic gridshells remained underdeveloped (Cichocka 2020). The main objective of the paper is to introduce a method of generating regular geodesic grid patterns on free-form surfaces and to examine its applicability to design structurally feasible geodesic gridshells. We adopted differential geometry methods of generating regular bidirectional geodesic grids on free-form surfaces. Then, we compared the structural performance of the regular and the irregular grids of the same density on three free-form surfaces. The proposed method successfully produces the regular geodesic grid patterns on the free-form surfaces with varying curvature-richness. Our analysis shows that gridshells with regular grid configurations perform structurally better than those with irregular patterns. We conclude that the presented method can be readily used and can expand possibilities of application of geodesic gridshells.
keywords	elastic timber gridshell; bending-active structure; grid configuration optimization; computational differential geometry; material-based design methodology; free-form surface; pattern; geodesic
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2020_299
id	ecaade2020_299
authors	Colmo, Claudia and Ayres, Phil
year	2020
title	3d Printed Bio-hybrid Structures - Investigating the architectural potentials of mycoremediation
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 573-582
doi	https://doi.org/10.52842/conf.ecaade.2020.1.573
summary	In this paper, we present a speculative design concept for a mycelium-based living bio-hybrid architectural system. The system combines inoculated lignocellulosic substrates with soil-based 3d printed structures that function as growth scaffolds, material boundaries and spatial organisers. The primary objective of the system is to exploit mycelium as a living remediator of contaminated sites, in the form of architectural proposition. The feasibility of this concept is investigated in two ways: 1) material composition development and process control parameters for soil-based 3d printing, 2) the synthesis of printed prototypes to determine geometric and environmental parameters for promoting colonisation of mycelium and supporting its role as both structural binder and 'Mycorestoration' agent. This work is contextualised with reference to the state-of-the-art in order to identify the research gap and articulate the contribution of a mycelium-based remediating architecture. The merits and limits of the experimental results are reflected upon and trajectories of further investigation outlined.
keywords	mycelium; mycorestoration; soil contamination; 3d printing; bio-hybrid architecture; design based experimentation
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia20_604
id	acadia20_604
authors	Craney, Ryan; Adel, Arash
year	2020
title	Engrained Performance
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 604-613.
doi	https://doi.org/10.52842/conf.acadia.2020.1.604
summary	This project presents a novel fabrication-aware and performance-driven computational design method that facilitates the design and robotic fabrication of a wood shingle facade system. The research merges computational design, robotic fabrication, and building facade optimization into a seamless digital design-to-fabrication workflow. The research encompasses the following topics: (1) a constructive system integrating the rules, constraints, and dependencies of conventional shingle facades; (2) an integrative computational design method incorporating material, robotic fabrication, and assembly constraints; (3) an optimization method for facade sun shading; and (4) a digital design-to-fabrication workflow informing the robotic fabrication procedures. The result is an integrative computational design method for the design of a wood shingle facade. Environmental analysis and multi-objective optimization are coupled with a variable facade surface to produce several optimal design solutions that conform to the constraints of the robotic setup and constructive system. When applied to architectural design, the proposed integrative computational design method demonstrates significant improvements in facade sun-shading performance while also linking the digital design to the fabrication process.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia20_564
id	acadia20_564
authors	Cutajar, Sacha; Costalonga Martins, Vanessa; van der Hoven, Christo; Baszyñski, Piotr; Dahy, Hanaa
year	2020
title	Towards Modular Natural Fiber-Reinforced Polymer Architecture
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 564-573.
doi	https://doi.org/10.52842/conf.acadia.2020.1.564
summary	Driven by the ecological crisis looming over the 21st century, the construction sector must urgently seek alternative design solutions to current building practices. In the wake of emergent digital technologies and novel material strategies, this research proposes a lightweight architectural solution using natural fiber-reinforced polymers (NFRP), which elicit interest for their inherent renewability as compared to high-performance yarns. Two associated fabrication techniques are deployed: tailored fiber placement (TFP) and coreless filament winding (CFW), both favored for their additive efficiencies granted by strategic material placement. A hypothesis is formed, postulating that their combination can leverage the standalone complexities of molds and frames by integrating them as active structural elements. Consequently, the TFP enables the creation of a 2D stiffness-controlled preform to be bent into a permanent scaffold for winding rigid 3D fiber bodies via CFW. A proof of concept is generated via the small-scale prototyping and testing of a stool, with results yielding a design of 1 kg capable of carrying 100 times its weight. Laying the groundwork for a scaled-up architectural proposal, the prototype instigates alterations to the process, most notably the favoring of a modular global design and lapped preform technique. The research concludes with a discussion on the resulting techno-implications for automation, deployment, material life cycle, and aesthetics, rekindling optimism towards future sustainable practices.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

For more results click below: