Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 653

Reformat results as: short short into frame detailed detailed into frame

_id	acadia20_236p
id	acadia20_236p
authors	Anton, Ana; Jipa, Andrei; Reiter, Lex; Dillenburger, Benjamin
year	2020
title	Fast Complexity
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 236-241
summary	The concrete industry is responsible for 8% of the global CO2 emissions. Therefore, using concrete in more complex and optimized shapes can have a significant benefit to the environment. Digital fabrication with concrete aims to overcome the geometric limitations of standardized formworks and thereby reduce the ecological footprint of the building industry. One of the most significant material economy potentials is in structural slabs because they represent 85% of the weight of multi-story concrete structures. To address this opportunity, Fast Complexity proposes an automated fabrication process for highly optimized slabs with ornamented soffits. The method combines reusable 3D-printed formwork (3DPF) and 3D concrete printing (3DCP). 3DPF uses binder-jetting, a process with submillimetre resolution. A polyester coating is applied to ensure reusability and smooth concrete surfaces otherwise not achievable with 3DCP alone. 3DPF is selectively used only where high-quality finishing is necessary, while all other surfaces are fabricated formwork-free with 3DCP. The 3DCP process was developed interdisciplinary at ETH Zürich and employs a two-component material system consisting of Portland cement mortar and calcium aluminate cement accelerator paste. This fabrication process provides a seamless transition from digital casting to 3DCP in a continuous automated process. Fast Complexity selectively uses two complementary additive manufacturing methods, optimizing the fabrication speed. In this regard, the prototype exhibits two different surface qualities, reflecting the specific resolutions of the two digital processes. 3DCP inherits the fine resolution of the 3DPF strictly for the smooth, visible surfaces of the soffit, for which aesthetics are essential. In contrast, the hidden parts of the slab use the coarse resolution specific to the 3DCP process, not requiring any formwork and implicitly achieving faster fabrication. In the context of an increased interest in construction additive manufacturing, Fast Complexity explicitly addresses the low resolution, lack of geometric freedom, and limited reinforcement options typical to layered extrusion 3DCP, as well as the limited customizability in concrete technology.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	sigradi2020_490
id	sigradi2020_490
authors	Santos, Ítalo Guedes dos; Andrade, Max Lira Veras Xavier de
year	2020
title	Standardization of Airport Architectural Design Projects BIM-based for Code Checking
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 490-498
summary	This paper addresses the use of BIM for code verification and automatic validation of the Architectural Design of Airports (ADA). In Brazil, the evaluation and approval of ADA are carried out by INFRAERO. Currently, designs are evaluated manually, resulting in errors and long evaluation time. To deal with this problem, a conceptual framework for automated ADA assessment with Code Checking is proposed. The method used was Design Science Research, with the proposal of an artifact. The partial results show the importance of establishing protocols for BIM modeling, based on IFC as an important tool for automated assessment with code checking.
keywords	Airports, Architectural Design of Airport, Building Information Modeling, Code Checking, IFC
series	SIGraDi
email
last changed	2021/07/16 11:49

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	acadia20_638
id	acadia20_638
authors	Claypool, Mollie; Jimenez Garcia, Manuel; Retsin, Gilles; Jaschke, Clara; Saey, Kevin
year	2020
title	Discrete Automation
doi	https://doi.org/10.52842/conf.acadia.2020.1.638
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 638-647.
summary	Globally, the built environment is inequitable. And while construction automation is often heralded as the solution to labor shortages and the housing crisis, such methods tend to focus on technology, neglecting the wider socioeconomic contexts. Automated Architecture (AUAR), a spinoff of AUAR Labs at The Bartlett School of Architecture, UCL, asserts that a values-centered, decentralized approach to automation centered around local communities can begin to address this material hegemony. The paper introduces and discusses AUAR’s platform-based framework, Discrete Automation, which subverts the status quo of automation that excludes those who are already disadvantaged into an inclusive network capable of providing solutions to both the automation gap and the assembly problem. Through both the wider context of existing modular housing platforms and issues of the current use of automated technologies in architectural production, Discrete Automation is discussed through the example of Block Type A, a discrete timber building system, which in conjunction with its combinatorial app constitutes the base of a community-led housing platform developed by AUAR. Built case studies are introduced alongside a discussion of the applied methodologies and an outlook on the platform’s potential for scalability in an equitable, sustainable manner.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia20_594
id	acadia20_594
authors	Farahbakhsh, Mehdi; Kalantar, Negar; Rybkowski, Zofia
year	2020
title	Impact of Robotic 3D Printing Process Parameters on Bond Strength
doi	https://doi.org/10.52842/conf.acadia.2020.1.594
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 594-603.
summary	Additive manufacturing (AM), also known as 3D printing, offers advantages over traditional construction technologies, increasing material efficiency, fabrication precision, and speed. However, many AM projects in academia and industrial institutions do not comply with building codes. Consequently, they are not considered safe structures for public utilization and have languished as exhibition prototypes. While three discrete scales—micro, mezzo, and macro—are investigated for AM with paste in this paper, structural integrity has been tackled on the mezzo scale to investigate the impact of process parameters on the bond strength between layers in an AM process. Real-world material deposition in a robotic-assisted AM process is subject to environmental factors such as temperature, humidity, the load of upper layers, the pressure of the nozzle on printed layers, etc. Those factors add a secondary geometric characteristic to the printed objects that was missing in the initial digital model. This paper introduces a heuristic workflow for investigating the impacts of three selective process parameters on the bond strength between layers of paste in the robotic-assisted AM of large-scale structures. The workflow includes a method for adding the secondary geometrical characteristic to the initial 3D model by employing X-ray computerized tomography (CT) scanning, digital image processing, and 3D reconstruction. Ultimately, the proposed workflow offers a pattern library that can be used by an architect or artificial intelligence (AI) algorithms in automated AM processes to create robust architectural forms.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia20_154p
id	acadia20_154p
authors	Josephson, Alex; Friedman, Jonathan; Salance, Benjamin; Vasyliv, Ivan; Melnichuk, Tim
year	2020
title	Gusto: Rationalizing Computational Masonry Design
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 154-159
summary	Gusto 501 is a multi-level Infill Building on the footprint of an old car garage. Surrounded by an overpass and former factories, the restaurant and event spaces take the form of a ‘Hyper garage’ as a nod to its urban context. The interior is punctuated with standard terracotta blocks formed to create an intricate play of shadows during the day and embedded with LEDs to provide atmospheric illumination at night. The client's vision, our narrative, and the program demanded an innovative use of the primal material: terracotta. The scale of the project required the use of 3,700 blocks. Within the array wrapped around a 50ft tall interior volume, each block needed to be formed and sequenced uniquely to maintain structural integrity and interface with building systems, and express the sculptural qualities our team had designed. Standard approaches to the masonry could not achieve the effects our team was striving for - we had to develop our ground-up process to manufacture and install mass-customized masonry. The design process involved an algorithmic approach to a series of cuts and geometric manipulations to the blocks that allowed for near-endless combinations/configurations to create a dynamic interior facade system. Partisans, partnering with a terracotta block manufacturer, a local mason, and a masonry engineer, pursued simplifying production using wire cutter systems. Digital and physical mock-ups were then used to create a robust library of parameterized design criteria that optimized corbelling, grout thickness, weight, and fabrication complexity. Working sets of drawings were automated through a fully integrated BIM model, simplifying and speeding up installation. The challenge of marrying these processes with the physical realities of installation required another level of collaboration that included the masons themselves and the electricians who would eventually combine lighting systems into the sculpted block array.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	sigradi2020_534
id	sigradi2020_534
authors	Mariano, Pedro Oscar Pizzetti; Fonseca, Raphaela Walger da; Pereira, Fernando Oscar Ruttkay; Pereira, Alice Theresinha Cybis
year	2020
title	Autonomous parametric process for daylight simulation applied to the proposal of a daylighting of buildings performance tool
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 534-540
summary	The openings features definition, considering the obstructions influence caused by the urban environment, are extremely relevant for the daylit buildings design. The complexity of the daylight phenomenon and the need to estimate its performance spread the use of parametric simulation and simulation programs. Thus, this article aims to create a parametric process, derived from a digital process, capable of simulating and registering the performance of daytime construction in different urban scenarios in an automated way. This process made it possible to generate a series of data capable of producing tools for understanding the phenomenon of natural daylight.
keywords	Parametric process, Simulation, Daylighting, Building performance
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	cdrf2019_265
id	cdrf2019_265
authors	Yue Qi, Ruqing Zhong, Benjamin Kaiser, Long Nguyen,Hans Jakob Wagner, Alexander Verl, and Achim Menges
year	2020
title	Working with Uncertainties: An Adaptive Fabrication Workflow for Bamboo Structures
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_25
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
summary	This paper presents and investigates a cyber-physical fabrication work-flow, which can respond to the deviations between built- and designed form in realtime with vision augmentation. We apply this method for large scale structures built from natural bamboo poles. Raw bamboo poles obtain evolutionarily optimized fibrous layouts ideally suitable for lightweight and sustainable building construction. Nevertheless, their intrinsically imprecise geometries pose a challenge for reliable, automated construction processes. Despite recent digital advancements, building with bamboo poles is still a labor-intensive task and restricted to building typologies where accuracy is of minor importance. The integration of structural bamboo poles with other building layers is often limited by tolerance issues at the interfaces, especially for large scale structures where deviations accumulate incrementally. To address these challenges, an adaptive fabrication process is developed, in which existing deviations can be compensated by changing the geometry of subsequent joints to iteratively correct the pose of further elements. A vision-based sensing system is employed to three-dimensionally scan the bamboo elements before and during construction. Computer vision algorithms are used to process and interpret the sensory data. The updated conditions are streamed to the computational model which computes tailor-made bending stiff joint geometries that can then be directly fabricated on-the-fly. In this paper, we contextualize our research and investigate the performance domains of the proposed workflow through initial fabrication tests. Several application scenarios are further proposed for full scale vision-augmented bamboo construction systems.
series	cdrf
email
last changed	2022/09/29 07:51

_id	sigradi2020_652
id	sigradi2020_652
authors	Baldessin, Guilherme Quinilato; Vaz, Matheus Motta; Medeiros, Givaldo Luiz; Fabricio, Márcio Minto
year	2020
title	Modeling of steel and precast concrete components based on BIM systems and their application for the teaching of Architectural Design
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 652-659
summary	This paper addresses the development of parametric components based on BIM (Building Information Modeling) tools and their application for the teaching of architecture and urban designs, in a discipline focused on housing typology. As a didactic and research method, the use of industrialized building technologies in steel and precast concrete for production efficiency and low maintenance is associated with the idea of the studio as a laboratory for verification and experimentation. The system was improved for two years, and provided students with greater constructive control, basic feedback on the budget, and mastery of representation, while they investigated alternative design concepts and new components.
keywords	Architectural Design, Building Technology, BIM, Higher Education, Housing
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	caadria2020_160
id	caadria2020_160
authors	Bruce, Caitlin, Sweet, Kevin and Ok, Jeongbin
year	2020
title	Closing the Loop - Recycling Waste Plastic
doi	https://doi.org/10.52842/conf.caadria.2020.1.135
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 135-144
summary	Worldwide we produce billions of tonnes of waste per year, including a million tonnes of plastic waste. Currently, there are methods for recycling plastic, but these methods can be expensive and time-consuming, resulting in most of the plastic being thrown into the landfill. Because plastic does not fully degrade, it ends up in the ocean and other waterways, poisoning the water with toxins. The purpose of this research is to provide a solution to reducing plastic waste by creating an alternative method of recycling that utilises new technologies such as additive manufacturing, to create a building material that fits into the concept of the circular economy. The findings of this research explored the recycling of plastic by collecting plastic waste such as PLA (Polylactic Acid) from old 3D printed models and other sources. The plastic was recycled into filament for additive manufacturing (AM) and used to print a building component, establishing a foundational proof of concept for the use of recycled plastic as a potential building material.
keywords	Additive Manufacturing; 3D Printing; Recycling Plastic ; Recycled Filament ; Waste Plastic
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2020_141
id	caadria2020_141
authors	Dezen-Kempter, Eloisa, Mezencio, Davi Lopes, Miranda, Erica De Matos, De SÃ¡, Danilo Pico and Dias, Ulisses
year	2020
title	Towards a Digital Twin for Heritage Interpretation - from HBIM to AR visualization
doi	https://doi.org/10.52842/conf.caadria.2020.2.183
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 183-191
summary	Data-driven Building Information Modelling (BIM) technology has brought new tools to efficiently deal with the tension between the real and the virtual environments in the field of Architecture, Engineering, Construction, and Operation (AECO). For historic assets, BIM represents a paradigm shift, enabling better decision-making about preventive maintenance, heritage management, and interpretation. The potential application of the Historic-BIM is creating a digital twin of the asset. This paper deals with the concept of a virtual environment for the consolidation and dissemination of heritage information. Here we show the process of creating interactive virtual environments for the Pampulha Modern Ensemble designed by Oscar Niemeyer in the 1940s, and the workflow to their dissemination in an AR visualization APP. Our results demonstrate the APP feasibility to the Pampulha's building interpretation.
keywords	Augmented Reality (AR); Historic Building Information Modelling (HBIM); Heritage Interpretation; Modern Architecture
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2020_392
id	sigradi2020_392
authors	Fialho, Beatriz Campos; Codinhoto, Ricardo; Fabricio, Márcio Minto
year	2020
title	BIM and IoT for the AEC Industry: A systematic literature mapping
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 392-399
summary	The AEC industry has been facing a digital transformation for improving services involved in buildings lifecycle, fostered by two disruptive technologies: Building Information Modelling (BIM) and Internet of Things (IoT). However, the literature lacks discussions regarding applications and challenges of BIM and IoT systems in the AEC. This Systematic Literature Mapping addresses this gap through search, analysis, and classification of 75 journal article abstracts published between 2015 and 2019. An increase of articles over the period is observed, predominantly with technical and processual solutions for Construction and Operation and Maintenance. The interoperability of data is a key challenge to organizations.
keywords	Building Information Modelling, Internet of Things, Integration, Network, Smart Cities
series	SIGraDi
email
last changed	2021/07/16 11:49

_id	acadia20_614
id	acadia20_614
authors	Xi Han, Isla; P.G. Bruun, Edvard; Marsh, Stuart; Tavano, Matteo; Adriaessens, Sigrid; Parascho, Stefana
year	2020
title	From Concept to Construction - A Transferable Design and Robotic Fabrication Method for a Building-Scale Vault
doi	https://doi.org/10.52842/conf.acadia.2020.1.614
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 614-623.
summary	The LightVault project demonstrates a novel robotic construction method for masonry vaults, developed in a joint effort between Princeton University and the global architecture and engineering firm Skidmore, Owings & Merrill (SOM). Using two cooperating robotic arms, a full-scale vault (plan: 3.6 × 6.5 m, height: 2.2 m) made up of 338 glass bricks was built live at the “Anatomy of Structure: The Future of Art + Architecture” exhibition. A major component of the project was developing a fabrication method that could be easily adapted to different robotic setups since the research, prototyping, and final exhibition occurred on different continents. This called for approaches that balanced the generic and the specific, allowing for quick and flexible construction staging and execution. The paper is structured as follows. First, we introduce the notion of transferability in robotic construction and then elaborate on this concept through the four major challenges in the LightVault project development: (1) prototype scalability, (2) end-effector design, (3) path planning and sequencing, and (4) fabrication tolerances. To develop and test solutions for these challenges, we iterated through several prototypes at multiple scales, with different materials for the standardized bricks, and at three distinct locations: Embodied Computation Lab, Princeton, US; Global Robots Ltd., Bedford, UK; and Ambika P3 gallery, London, UK. While this paper is specifically tailored to the construction of masonry structures, our long-term goal is to enable more robotic fabrication projects that consider the topic of transferability as a means to develop more robust and broadly applicable techniques.
series	ACADIA
type	normal paper
email
last changed	2024/03/11 06:44

_id	caadria2020_046
id	caadria2020_046
authors	Alva, Pradeep, Lee, Han Jie, Lin, Zhuoli, Mehta, Palak, Chen, Jielin and Janssen, Patrick
year	2020
title	Geo-computation for District Planning - An Agile Automated Modelling Approach
doi	https://doi.org/10.52842/conf.caadria.2020.1.793
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 793-802
summary	This paper focuses on developing a novel geo-computational methodology for automating the generation of design options for district planning. The knowledge contribution focuses on the ability of the planners and designers to interact with and override the automated process. This approach is referred to as "agile automated modelling". The approach is demonstrated through a case study in which three adjacent districts are generated with a total area of approximately 1300 hectares. An automated modelling process is implemented based on a set of core planning principles established by the planners. The automated process generates street networks, land parcels, and 3-dimensional urban models. The process is broken down into three steps and users are then able to intervene at the end of every step to override and modify the outputs. This aims to help planners and designers to iteratively generate and assess various planning outcomes.
keywords	Geo-computation; procedural modelling; GIS; planning automation; neural network
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2020_304
id	caadria2020_304
authors	Fischer, Thomas and Wortmann, Thomas
year	2020
title	From Geometrically to Algebraically Described Hyperbolic Paraboloids - An optimisation-based analysis of the Philips Pavilion
doi	https://doi.org/10.52842/conf.caadria.2020.1.435
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 435-444
summary	In this paper, we present a procedure to derive algebraic parameters from geometrically described truncated hyperbolic paraboloid surfaces. The procedure uses parametric modelling and optimisation to converge on close algebraic approximations of hyperbolic paraboloid geometry through a successive breakdown of vast search spaces. We illustrate this procedure with its application to the surfaces of the 1958 Philips Pavilion designed by Le Corbusier and Iannis Xenakis. This application yielded previously unavailable parametric data of this building in algebraic form. It highlights the power of the parametric design and optimisation toolkit, both in terms of automated search and epistemological enablement.
keywords	parametric analysis; optimisation; ruled surfaces; hyperbolic paraboloid; geometry reconstruction
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2020_047
id	caadria2020_047
authors	Lee, Han Jie, Lin, Zhuoli, Zhang, Ji and Janssen, Patrick
year	2020
title	Irradiance Mappinig for Large Scale City Models
doi	https://doi.org/10.52842/conf.caadria.2020.1.803
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 803-812
summary	This paper reports on the development of a geocomputational simulation workflow for the irradiance mapping of large scale city models. A fully automated workflow is presented, for importing CityGML city models, generating the simulation input models, executing the simulations, and aggregating the results. In order to speed up the overall processing time, the workflow uses parallel processing across multiple computers and multiple cores. Two case studies are presented, for Singapore and for Rotterdam.
keywords	Integrated irradiance simulation; Solar potential assessment ; Large scale urban 3D model; Houdini; Radiance
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2020_264
id	ecaade2020_264
authors	Nicholas, Paul, Rossi, Gabriella, Papadopoulou, Iliana, Tamke, Martin, Aalund Brandt, Nikolaj and Jessen Hansen, Leif
year	2020
title	Precision Partner - Enhancing GFRC craftsmanship with industry 4.0 factory-floor feedback
doi	https://doi.org/10.52842/conf.ecaade.2020.2.631
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 631-640
summary	This paper presents a novel human-machine collaborative approach to automatic quality-control of Glass-Fiber Reinforced Concrete (GFRC) molds directly on the factory floor. The framework introduces Industry 4.0 technologies to enhance the ability of skilled craftsmen to make molds through the provision of horizontal feedback regarding dimensional tolerances. Where digital tools are seldom used in the fabrication of GFRC molds, and expert craftsmen are not digital experts, our implementation of automated registration and feedback processes enables craftsmen to be integrated into and gain value from the digital production chain. In this paper, we describe the in-progress framework, Precision Partner, which connects 3d scanning and point cloud registration of geometrically complex and varied one off elements to factory floor dimensional feedback. We firstly introduce the production context of GFRC molds, as well as industry standards for production feedback. We then detail our methods, and report the results of a case study that tests the framework on the case of a balcony element.
keywords	3d Scanning; GFRC; Feedback; Automation; Human in the loop; Digital Chain
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia20_446
id	acadia20_446
authors	Norell, Daniel; Rodhe, Einar; Hedlund, Karin
year	2020
title	Completions
doi	https://doi.org/10.52842/conf.acadia.2020.1.446
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 446-455.
summary	Reuse of construction and demolition waste tends to be exceptional rather than systemic, despite the fact that such waste exists in excess. One of the challenges in handling used elements and materials is integrating them into a digital workflow through means of survey and representation. Techniques such as 3D scanning and robotic fabrication have been used to target irregular geometries of such extant material. Scanning can be applied to digitally define a unique rather than standard stock of materials or, as in the field of preservation, to transfer specific forms and qualities onto a new stock. This paper melds these two approaches through Completions, a project that promotes reuse by integrating salvaged elements and materials into new assemblies. Drawing from the ancient practice of reuse known as spolia, the work develops from the identification and documentation of a varied set of used entities that become points of departure for subsequent design and production of new entities. This involves multiple steps, from locating and selecting used elements to scanning and fabrication. Three assemblies based on salvaged objects are produced: a window frame, a door panel, and a mantelpiece. Different means of documentation are outlined in relation to specific qualities of these objects, from photogrammetry to image and mesh-based tracing. Authentic qualities belonging to these elements, such as wear and patina, are coupled with more ambiguous forms and materialities only attainable through digital survey and fabrication. Finally, Completions speculates on how more automated workflows might make it feasible to develop extensive virtual catalogs of used objects that designers could interact with remotely.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ijac202018404
id	ijac202018404
authors	Paul Nicholas, Gabriella Rossi, Ella Williams, Michael Bennett and Tim Schork
year	2020
title	Integrating real-time multi-resolution scanning and machine learning for Conformal Robotic 3D Printing in Architecture
source	International Journal of Architectural Computing vol. 18 - no. 4, 371–384
summary	Robotic 3D printing applications are rapidly growing in architecture, where they enable the introduction of new materials and bespoke geometries. However, current approaches remain limited to printing on top of a flat build bed. This limits robotic 3D printing’s impact as a sustainable technology: opportunities to customize or enhance existing elements, or to utilize complex material behaviour are missed. This paper addresses the potentials of conformal 3D printing and presents a novel and robust workflow for printing onto unknown and arbitrarily shaped 3D substrates. The workflow combines dual-resolution Robotic Scanning, Neural Network prediction and printing of PETG plastic. This integrated approach offers the advantage of responding directly to unknown geometries through automated performance design customization. This paper firstly contextualizes the work within the current state of the art of conformal printing. We then describe our methodology and the design experiment we have used to test it. We lastly describe the key findings, potentials and limitations of the work, as well as the next steps in this research.
keywords	Conformal printing, robotic fabrication, 3D scanning, neural networks, industry 4.0
series	journal
email
last changed	2021/06/03 23:29

_id	ijac202018406
id	ijac202018406
authors	Roberto Naboni, Anja Kunic and Luca Breseghello
year	2020
title	Computational design, engineering and manufacturing of a material-efficient 3D printed lattice structure
source	International Journal of Architectural Computing vol. 18 - no. 4, 404–423
summary	Building with additive manufacturing is an increasingly relevant research topic in the field of Construction 4.0, where designers are seeking higher levels of automation, complexity and precision compared to conventional construction methods. As an answer to the increasing problem of scarcity of resources, the presented research exploits the potential of Fused Deposition Modelling in the production of a lightweight load-responsive cellular lattice structure at the architectural scale. The article offers an extensive insight into the computational processes involved in the design, engineering, analysis, optimization and fabrication of a material-efficient, fully 3D printed, lattice structure. Material, structure and manufacturing features are integrated within the design development in a comprehensive computational workflow. The article presents methods and results while discussing the project as a material-efficient approach to complex structures.
keywords	Automated design, cellular lattice, digital fabrication, additive manufacturing, computational workflow
series	journal
email
last changed	2021/06/03 23:29

For more results click below: