Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 653

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2020_190
id	ecaade2020_190
authors	Dounas, Theodoros, Jabi, Wassim and Lombardi, Davide
year	2020
title	Smart Contracts for Decentralised Building Information Modelling
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 565-574
doi	https://doi.org/10.52842/conf.ecaade.2020.2.565
summary	The paper presents a model for decentralizing building information modelling, through implementing its infrastructure using the decentralized web. We discuss the shortcomings of BIM in terms of its infrastructure, with a focus on tracing identities of design authorship in this collective design tool. In parallel we examine the issues with BIM in the cloud and propose a decentralized infrastructure based on the Ethereum blockchain and the Interplanetary filesystem (IPFS). A series of computing nodes, that act as nodes on the Ethereum Blockchain, host disk storage with which they participate in a larger storage pool on the Interplanetary Filesystem. This storage is made available through an API is used by architects and designers creating and editing a building information model that resides on the IPFS decentralised storage. Through this infrastructure central servers are eliminated, and BIM libraries and models can be shared with others in an immutable and transparent manner. As such Architecture practices are able to exploit their intellectual property in novel ways, by making it public on the internet. The infrastructure also allows the decentralised creation of a resilient global pool of data that allows the participation of computation agents in the creation and simulation of BIM models.
keywords	Blockchain; decentralisation; immutability; resilience; Building Information Modelling
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2020_403
id	caadria2020_403
authors	Ghandi, Mona
year	2020
title	Reducing Energy Consumption through Cyber-Physical Adaptive Spaces and Occupants' Biosignals
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 121-130
doi	https://doi.org/10.52842/conf.caadria.2020.2.121
summary	The field of architecture has long embraced adaptive approaches to address issues of sustainability and efficiency. Building energy consumption accounts for about 40% of the total energy consumption in the U.S. This energy is mainly used for lighting, heating, cooling, and ventilation. Researches show that 30% of that energy is wasted. One of the main reasons for such high energy waste in the commercial (and even private) sectors is a generic assumption about the occupants' preferences. To fill this gap, the objective of this project is to optimize building energy retrofits by creating smart environments that autonomously respond to the occupants' comfort level using affective computing and adaptive systems. This adaptive approach will help optimizing energy consumption without sacrificing occupants' comfort through passive cooling and heating strategy, responding to occupants' preferences detected from their biological and neurological data. Progress towards achieving this goal will make building energy costs more affordable to the benefit of families and businesses and reduce energy waste.
keywords	Human-Computer Interaction; Optimizing Energy Consumption; Sustainability + High Performance Built Environment; Adaptive and Interactive Architecture; Cyber-Physical Spaces, Affective Computing, Occupantsâ€™ Comfort and Well-Being
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia20_182p
id	acadia20_182p
authors	Grasser, Alexander; Parger, Alexandra; Hirschberg, Urs
year	2020
title	Realtime Architecture Platform: CollabWood
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 182-187
summary	This project presents a Realtime Architecture Platform applied in a telepresence design studio to design and construct the CollabWood prototype. The platform, developed by the authors, enables an open workflow to collaborate and design in unity. It provides a persistent online environment for real-time architectural production. The work method is based on the concept of collaborative objects and distributed designers. These collaborative objects are the shared content: discrete parts, prefabs, or blocks that enable interaction, communication, and collaboration between its users and owners. The distributed designers can contribute by instantiating these collaborative objects. Users placing an object react to the local neighboring conditions and therefore add their embodied design decision to the global architecture. The users get immersed in digital proximity by communicating through the integrated chat or digital calls, discussing strategies, debating design intentions, analyzing the built structure, and scanning for improvements. This pervasive collaboration lays the foundation for a democratization of the design process. As a proof of concept, this method was implemented with 20 students in a telepresence design studio. The participants embraced the real-time workflow and applied the collaborative tool throughout the semester from different locations and time zones. Using the platform to design the CollabWood prototype in real-time collaboratively was realized as a 1:1 project with local, accessible material and AR technology for assembly. The global pandemic accelerated the importance of collaboration. Realtime Architecture Platform’s response of providing an accessible common platform for real-time interaction, design, and collaboration can be regarded as a first step towards how we might work together in the future.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	acadia20_176p
id	acadia20_176p
authors	Lok, Leslie; Zivkovic, Sasa
year	2020
title	Ashen Cabin
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 176-181
summary	Ashen Cabin, designed by HANNAH, is a small building 3D-printed from concrete and clothed in a robotically fabricated envelope made of irregular ash wood logs. From the ground up, digital design and fabrication technologies are intrinsic to the making of this architectural prototype, facilitating fundamentally new material methods, tectonic articulations, forms of construction, and architectural design languages. Ashen Cabin challenges preconceived notions about material standards in wood. The cabin utilizes wood infested by the Emerald Ash Borer (EAB) for its envelope, which, unfortunately, is widely considered as ‘waste’. At present, the invasive EAB threatens to eradicate most of the 8.7 billion ash trees in North America (USDA, 2019). Due to their challenging geometries, most infested ash trees cannot be processed by regular sawmills and are therefore regarded as unsuitable for construction. Infested and dying ash trees form an enormous and untapped material resource for sustainable wood construction. By implementing high precision 3D scanning and robotic fabrication, the project upcycles Emerald-Ash-Borer-infested ‘waste wood’ into an abundantly available, affordable, and morbidly sustainable building material for the Anthropocene. Using a KUKA KR200/2 with a custom 5hp band saw end effector at the Cornell Robotic Construction Laboratory (RCL), the research team can saw irregular tree logs into naturally curved boards of various and varying thicknesses. The boards are arrayed into interlocking SIP façade panels, and by adjusting the thickness of the bandsaw cut, the robotically carved timber boards can be assembled as complex single curvature surfaces or double-curvature surfaces. The undulating wooden surfaces accentuate the building’s program and yet remain reminiscent of the natural log geometry which they are derived from. The curvature of the wood is strategically deployed to highlight moments of architectural importance such as windows, entrances, roofs, canopies, or provide additional programmatic opportunities such as integrated shelving, desk space, or storage.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	sigradi2020_586
id	sigradi2020_586
authors	Perelli Soto, Bruno; Soza Ruiz, Pedro; Tapia Zarricueta, Ricardo
year	2020
title	Towards the development of Smart Buildings: A Lowcost IoT Healthcare Management Proposal in Times of a World Pandemic
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 586-593
summary	This research addresses the impact that technologies, particularly the Internet of Things, have when facing - directly or indirectly - the current panorama of a pandemic due to COVID-19. First, we review the literature and propose a context that allows for efficient clarification regarding two concerns: where should we insert this project? What are the implications and scope of such a decision? Secondly, we present experiences of implementation of IoT prototypes, which – in context - consider the education of the population of an apartment building, the mitigation and detection of COVID-19 symptoms, and the ability to obtain data from these experiences.
keywords	COVID-19, IoT, Design, Smart buildings, Lockdown
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	acadia20_360
id	acadia20_360
authors	Schneider, Maxie; Fransén Waldhör, Ebba; Denz, Paul-Rouven; Vongsingha, Puttakhun; Suwannapruk, Natchai; Sauer, Christiane
year	2020
title	Adaptive Textile Facades Through the Integration of Shape Memory Alloy
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 360-370.
doi	https://doi.org/10.52842/conf.acadia.2020.1.360
summary	The R&D project ADAPTEX showcases a material-driven and computationally informed design approach to adaptive textile facades through the integration of shape memory alloy (SMA) as an actuator. The results exhibit thermally responsive and self-sufficient sun-shading solutions with innovative design potential that enhance the energy performance of the built environment. With regard to climate targets, an environmentally viable concept is proposed that reduces the energy required for climatization, is lightweight, and can function as a refurbishment system. Two concepts—ADAPTEX Wave and ADAPTEX Mesh—are being developed to be tested as full-scale demonstrators for facade deployment by an interdisciplinary team from architecture, textile design, facade engineering, and material research. The two concepts follow a material-driven, low-complexity design strategy and differ in type of kinetic movement, textile construction, integration of the SMA, reset force, and scale of permeability. In this paper, we describe the computational design process and tools to develop and design current and future prototypes and demonstrators, providing insights on the challenges and potentials of developing textiles with integrated shape memory alloys for architectural applications.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ijac202119406
id	ijac202119406
authors	Silva Dória, David Rodrigues; Ramaswami, Keshav; Claypool, Mollie; Retsin, Gilles
year	2021
title	Public parts, resocialized autonomous communal life
source	International Journal of Architectural Computing 2021, Vol. 19 - no. 4, 568–593
summary	Commoning embodies the product of social contracts and behaviors between groups of individuals. In thecase of social housing and the establishment of physical domains for life, commoning is an intersection of thesecontracts and the restrictions and policies that prohibit and allow them to occur within municipalities. Via aplatform-based project entitled Public Parts (2020), this article will also present positions on the reification ofthe common through a set of design methodologies and implementations of automation. This platform seeksto subvert typical platform models to decrease ownership, increase access, and produce a new form ofcommunal autonomous life amongst individuals that constitute the rapidly expanding freelance, work fromhome, and gig economies. Furthermore, this text investigates the consequences of merging domestic spacewith artificial intelligence by implementing machine learning to reconfigure spaces and program. Theproblems that arise from the deployment of machine learning algorithms involve issues of collection, usage,and ownership of data. Through the physical design of space, and a central AI which manages the platform andthe automated management of space, the core objective of Public Parts is to reify the common througharchitecture and collectively owned data.
keywords	Common, housing, platforms, reification, artificial intelligence, automation
series	journal
email
last changed	2024/04/17 14:29

_id	caadria2020_098
id	caadria2020_098
authors	Davidova, Marie and McMeel, Dermott
year	2020
title	Codesigning with Blockchain for Synergetic Landscapes - The CoCreation of Blockchain Circular Economy through Systemic Design
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 333-342
doi	https://doi.org/10.52842/conf.caadria.2020.2.333
summary	The paper is exploring methodology within the work in progress research by design through teaching project called 'Synergetic Landscapes'. It discusses codesign and cocreation processes that are crossing the academia, NGOs and applied practice within so called 'real life codesign laboratory' (DavidovÃ¡, PÃ¡nek, & PÃ¡nkovÃ¡, 2018). This laboratory performs in real time and real life environment. The work investigates synergised bio-digital (living, non-living, physical, analogue, digital and virtual) prototypical interventions in urban environment that are linked to circular economy and life cycles systems running on blockchain. It represents a holistic systemic interactive and performing approach to design processes that involve living, habitational and edible, social and reproductive, circular and token economic systems. Those together are to cogenerate synergetic landscapes.
keywords	codesign; blockchain; systemic design; prototyping; bio-digital design
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ijac202018304
id	ijac202018304
authors	Aagaard, Anders Kruse and Niels Martin Larsen
year	2020
title	Developing a fabrication workflow for irregular sawlogs
source	International Journal of Architectural Computing vol. 18 - no. 3, 270-283
summary	In this article, we suggest using contemporary manufacturing technologies to integrate material properties with architectural design tools, revealing new possibilities for the use of wood in architecture. Through an investigative approach, material capacities and fabrication methods are explored and combined towards establishing new workflows and architectural expressions, where material, fabrication and result are closely interlinked. The experimentation revolves around discarded, crooked oak logs, doomed to be used as firewood due to their irregularity. This project treats their diverging shapes differently by offering unique processing to each log informed by its particularities. We suggest here a way to use the natural forms and properties of sawlogs to generate new structures and spatial conditions. In this article, we discuss the scope of this approach and provide an example of a workflow for handling the discrete shapes of natural sawlogs in a system that involve the collection of material, scanning/digitisation, handling of a stockpile, computer analysis, design and robotic manufacturing. The creation of this specific method comes from a combination of investigation of wood as a material, review of existing research in the field, studies of the production lines in the current wood industry and experimentation through our in-house laboratory facilities. As such, the workflow features several solutions for handling the complex and different shapes and data of natural wood logs in a highly digitised machining and fabrication environment. This up-cycling of discarded wood supply establishes a non-standard workflow that utilises non-standard material stock and leads to a critical articulation of today’s linear material economy. The project becomes part of an ambition to reach sustainable development goals and technological innovation in global and resource-intensive architecture and building industry.
keywords	Natural wood, robotic fabrication, computation, fabrication, research by design
series	journal
email
last changed	2020/11/02 13:34

_id	ecaade2020_133
id	ecaade2020_133
authors	Andrade Zandavali, Barbara, Paul Anderson, Joshua and Patel, Chetan
year	2020
title	Embodied Learning through Fabrication Aware Design
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 145-154
doi	https://doi.org/10.52842/conf.ecaade.2020.2.145
summary	The contemporary culture of geometry-driven design stands as consequence of an institutionalised segregation between the fields of architecture, structure and construction. In turn, digital design methods that are both material and fabrication aware from the outset create space for uncertainty and the potential for embodied learning. Following this principle, this paper summarises the outcomes of a workshop developed to investigate the contribution of fabrication aware design methods in the production of a masonry block using both analogue and digital manufacturing. Students were to develop and investigate a design, through assembly techniques and configurations orientated around manual hot wire cutting, robotic tooling and three-dimensional printing. Outcomes were manufactured and compared regarding work precision, production time, material efficiency, cost and scalability. The analysis indicated that the most accurate results yielded from the robotic tooling system, and simultaneously exhibited the most efficient use of time, while the three-dimensional printer generated the least material waste, due to the nature of additive production. Fabrication aware design and comparative analysis enabled students to make more informed decisions while the use of rapid prototyping facilitated a relationship between digitalization and materiality allowing for a space in which uncertainty and reflection could be fostered. Reinforcing that fabrication aware design methods can unify the field and provide guidance to designers over multi-lateral aspects of a project.
keywords	Fabrication-Aware Design; Rapid Prototyping; Embodiment
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia20_236p
id	acadia20_236p
authors	Anton, Ana; Jipa, Andrei; Reiter, Lex; Dillenburger, Benjamin
year	2020
title	Fast Complexity
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 236-241
summary	The concrete industry is responsible for 8% of the global CO2 emissions. Therefore, using concrete in more complex and optimized shapes can have a significant benefit to the environment. Digital fabrication with concrete aims to overcome the geometric limitations of standardized formworks and thereby reduce the ecological footprint of the building industry. One of the most significant material economy potentials is in structural slabs because they represent 85% of the weight of multi-story concrete structures. To address this opportunity, Fast Complexity proposes an automated fabrication process for highly optimized slabs with ornamented soffits. The method combines reusable 3D-printed formwork (3DPF) and 3D concrete printing (3DCP). 3DPF uses binder-jetting, a process with submillimetre resolution. A polyester coating is applied to ensure reusability and smooth concrete surfaces otherwise not achievable with 3DCP alone. 3DPF is selectively used only where high-quality finishing is necessary, while all other surfaces are fabricated formwork-free with 3DCP. The 3DCP process was developed interdisciplinary at ETH Zürich and employs a two-component material system consisting of Portland cement mortar and calcium aluminate cement accelerator paste. This fabrication process provides a seamless transition from digital casting to 3DCP in a continuous automated process. Fast Complexity selectively uses two complementary additive manufacturing methods, optimizing the fabrication speed. In this regard, the prototype exhibits two different surface qualities, reflecting the specific resolutions of the two digital processes. 3DCP inherits the fine resolution of the 3DPF strictly for the smooth, visible surfaces of the soffit, for which aesthetics are essential. In contrast, the hidden parts of the slab use the coarse resolution specific to the 3DCP process, not requiring any formwork and implicitly achieving faster fabrication. In the context of an increased interest in construction additive manufacturing, Fast Complexity explicitly addresses the low resolution, lack of geometric freedom, and limited reinforcement options typical to layered extrusion 3DCP, as well as the limited customizability in concrete technology.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	ecaade2020_499
id	ecaade2020_499
authors	Ashour, Ziad and Yan, Wei
year	2020
title	BIM-Powered Augmented Reality for Advancing Human-Building Interaction
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 169-178
doi	https://doi.org/10.52842/conf.ecaade.2020.1.169
summary	The shift from computer-aided design (CAD) to building information modeling (BIM) has made the adoption of augmented reality (AR) promising in the field of architecture, engineering and construction. Despite the potential of AR in this field, the industry and professionals have still not fully adopted it due to registration and tracking limitations and visual occlusions in dynamic environments. We propose our first prototype (BIMxAR), which utilizes existing buildings' semantically rich BIM models and contextually aligns geometrical and non-geometrical information with the physical buildings. The proposed prototype aims to solve registration and tracking issues in dynamic environments by utilizing tracking and motion sensors already available in many mobile phones and tablets. The experiment results indicate that the system can support BIM and physical building registration in outdoor and part of indoor environments, but cannot maintain accurate alignment indoor when relying only on a device's motion sensors. Therefore, additional computer vision and AI (deep learning) functions need to be integrated into the system to enhance AR model registration in the future.
keywords	Augmented Reality; BIM; BIM-enabled AR; GPS; Human-Building Interactions; Education
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia20_120
id	acadia20_120
authors	Barsan-Pipu, Claudiu; Sleiman, Nathalie; Moldovan, Theodor
year	2020
title	Affective Computing for Generating Virtual Procedural Environments Using Game Technologies
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 120-129.
doi	https://doi.org/10.52842/conf.acadia.2020.2.120
summary	Architects have long sought to create spaces that can relate to or even induce specific emotional conditions in their users, such as states of relaxation or engagement. Dynamic or calming qualities were given to these spaces by controlling form, perspective, lighting, color, and materiality. The actual impact of these complex design decisions has been challenging to assess, from both quantitative and qualitative standpoints, because neural empathic responses, defined in this paper by feature indexes (FIs) and mind indexes (MIs), are highly subjective experiences. Recent advances in the fields of virtual procedural environments (VPEs) and virtual reality (VR), supported by powerful game engine (GE) technologies, provide computational designers with a new set of design instruments that, when combined with brain-computing interfacing (BCI) and eye-tracking (E-T) hardware, can be used to assess complex empathic reactions. As the COVID-19 health crisis showed, virtual social interaction becomes increasingly relevant, and the social catalytic potential of VPEs can open new design possibilities. The research presented in this paper introduces the cyber-physical design of such an affective computing system. It focuses on how relevant empathic data can be acquired in real time by exposing subjects within a dynamic VR-based VPE and assessing their emotional responses while controlling the actual generative parameters via a live feedback loop. A combination of VR, BCI, and E-T solutions integrated within a GE is proposed and discussed. By using a VPE inside a BCI system that can be accurately correlated with E-T, this paper proposes to identify potential morphological and lighting factors that either alone or combined can have an empathic effect expressed by the relevant responses of the MIs.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia20_202p
id	acadia20_202p
authors	Battaglia, Christopher A.; Verian, Kho; Miller, Martin F.
year	2020
title	DE:Stress Pavilion
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 202-207
summary	Print-Cast Concrete investigates concrete 3D printing utilizing robotically fabricated recyclable green sand molds for the fabrication of thin shell architecture. The presented process expedites the production of doubly curved concrete geometries by replacing traditional formwork casting or horizontal corbeling with spatial concrete arching by developing a three-dimensional extrusion path for deposition. Creating robust non-zero Gaussian curvature in concrete, this method increases fabrication speed for mass customized elements eliminating two-part mold casting by combining robotic 3D printing and extrusion casting. Through the casting component of this method, concrete 3D prints have greater resolution along the edge condition resulting in tighter assembly tolerances between multiple aggregated components. Print-Cast Concrete was developed to produce a full-scale architectural installation commissioned for Exhibit Columbus 2019. The concrete 3D printed compression shell spanned 12 meters in length, 5 meters in width, and 3 meters in height and consisted of 110 bespoke panels ranging in weight of 45 kg to 160 kg per panel. Geometrical constraints were determined by the bounding box of compressed sand mold blanks and tooling parameters of both CNC milling and concrete extrusion. Using this construction method, the project was able to be assembled and disassembled within the timeframe of the temporary outdoor exhibit, produce <1% of waste mortar material in fabrication, and utilize 60% less material to construct than cast-in-place construction. Using the sand mold to contain geometric edge conditions, the Print-Cast technique allows for precise aggregation tolerances. To increase the pavilions resistance to shear forces, interlocking nesting geometries are integrated into each edge condition of the panels with .785 radians of the undercut. Over extruding strategically during the printing process casts the undulating surface with accuracy. When nested together, the edge condition informs both the construction logic of the panel’s placement and orientation for the concrete panelized shell.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	ijac202018203
id	ijac202018203
authors	Beattie , Hamish; Daniel Brown and Sara Kindon
year	2020
title	Solidarity through difference: Speculative participatory serious urban gaming (SPS-UG)
source	International Journal of Architectural Computing vol. 18 - no. 2, 141-154
summary	This article discusses the methodology and results of the Maslow’s Palace workshops project, which engages with current debates surrounding the democratisation of digital urban design technology and stakeholder decision making, through the implementation of a speculative oriented approach to serious gaming. The research explores how serious games might be used to help marginalised communities consider past, future and present community experiences, reconcile dissimilar assumptions, generate social capital building and design responses and prime participants for further long-term design engagement processes through a new approach called Speculative Participatory Serious Urban Gaming. Empirical material for this research was gathered from a range of case study workshops prepared with three landfill-based communities and external partners throughout 2017. Results show the approach helped participants develop shared norms, values and collective understandings of sensitive topics and develop ideas for future action through ‘collective tinkering.
keywords	Participatory design, urban design, social capital, serious games
series	journal
email
last changed	2020/11/02 13:34

_id	acadia20_208p
id	acadia20_208p
authors	Bernier-Lavigne, Samuel
year	2020
title	Object-Field
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 208-213
summary	This project aims to continue the correlative study between two fundamental entities of digital architecture: the object and the field. Following periods of experimentations on the ""field"" (materialization of flows of data through animation), the ""field of objects"" (parametricism), the ""object"" (OOO), we investigate the last possible interaction remaining: the ""object-field,"" by merging the formal characteristics of the object with the structural flow of its internal field. This investigation is achieved by exploring the high-resolution features of 3d printing in the design of autonomous architectural objects expressing materiality through topological optimization. The objects are generated by an iterative process of volumetric reduction, resulting in an ensemble of monoliths. Four of them are selected and analyzed through topological optimization in order to extract their internal fields. Next, a series of high-resolution algorithmic systems translate the structural information into 3d printed materiality. Of the four object-fields, one materializes, close to identical, the result of the optimization, giving the keystone to understanding the others. The second one expresses the structural flow through a 1mm voxel system, informed by the optimization, having the effect of stiffening the structure where it is needed and thus generating a new topography on the object. The last two explore the blur that this high-resolution can paradoxically create, with complete integration of the optimal structure in a transparent monolith. This is achieved by a vertex displacement algorithm, and the dissolution of the formal data of the monolith and the structural flows, through the mereological assembly of simple linear elements. For each object-field, a series of drawings was developed using specific algorithmic procedures derived from the peculiarities of their complex geometry. The drawings aim to catalyze coherence throughout the project, where similarities, hitherto kept apart by the multiple materialities, begin to dialogue.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	acadia20_198p
id	acadia20_198p
authors	Birkeland, Jennifer; Scelsa, Jonathan A.
year	2020
title	Live L’oeil – Through the Looking Ceiling
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 198-201
summary	Following the proliferation of linear perspective during the Renaissance, the hegemony of the vantage point was often problematically used to signify the patron’s dominance. During the mannerist era, we witnessed the creation of elaborate rooms, painted in architectural linear perspective establishing the illusionary space of faraway lands - a measure of optic imperialism wherein the conquests of the west played out in the domestic decoration of the elite later provided to the public as a societal spectacle in the form of the panorama. Within these architectural illusions, or Quadratura as they were named in Italy, lies the most notable and justifiable critique of design by vantage point, the question ‘which vantage point is privileged?’ History not surprisingly reveals that the typical vantage point was most problematically centered at one and three-quarter meters above the ground – coincident with five centimeters below the average height of a human European male. The design of architectural form through view or spatial image has arguably perpetuated this act of optic bias. This project addresses this problematic practice of design by vantage point by utilizing motion sensors to liberate the virtual space of a canonic example of quadrature from its confines within a singular vantage point. The authors digitally modeled the projective space of Andrea Pozzo’s vision for the Church of Sant’Ignazio di Loyola in Rome, scaled and fit to a gallery space outfitted with a canvas to inform a ceiling plane. Anamorphic images of the virtual heavenly space, as seen through the canvas ceiling picture plane, were created from the digital model and encoded to the individual moments in the room. Individuals who moved through the gallery were followed by the illusion of the heavenly space, creating a live l’oeil distortion.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	ecaade2020_180
id	ecaade2020_180
authors	Bolshakova, Veronika, Besançon, Franck, Guerriero, Annie and Halin, Gilles
year	2020
title	Use of a Digital Collaboration Tool for Project Review - A pedagogical experiment with multidisciplinary teams
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 651-660
doi	https://doi.org/10.52842/conf.ecaade.2020.2.651
summary	This paper emphasizes feedback from a pedagogical experiment in the context of teaching collaboration and design to multidisciplinary teams. A digital collaboration tool, a multi-touch table and collaboration software, was used as a support for discussion and decision-making for weekly project review meetings. The experiment participants' feedback on the use and usability of the digital collaboration tool highlights the potential for the use of synchronous collaboration technology and project-based learning for higher-level education. It also highlights the need for a transition towards implementation of digital tools at project review sessions.
keywords	: Synchronous collaboration; Pedagogical experiment; Project-based learning; CSCW; NUI; BIM
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia20_226p
id	acadia20_226p
authors	Borhani, Alireza; Kalantar, Negar
year	2020
title	Interlocking Shell
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 226-231
summary	With a specific focus on robotic stereotomy, two full-scale vault structures were designed to explore the potential of self-standing building structures made from interlocking components; these structures were fabricated with a track-mounted industrial-scale robot (ABB 4600). To respond to the economic affordances of robotic subtractive cutting, all uniquely shaped structural modules came from one block of material (48"" x96"" x36""). Through the discretization of curvilinear tessellated vault surfaces into a limited number of uniquely shaped modules with embedded form-fitting connectors, the project exhibited the potential for programming a robot to cut ruled surfaces to produce freeform shells of any kind. Representing nearly zero-waste construction, the developed technology can potentially be used for self-supporting emergency shelters and field medical clinics, facilitating easy shipping and speedy assembly. Without using any scaffolding, a few people can erect and dismantle an entire mortar-free structure at the construction site. The disassembled structure occupies minimal space in storage, and the structure’s pieces can be transported to the site in stacks. Robot milling is a common technique for removing material to transform a block into a sculptural shape. Unlike milling techniques that produce significant waste, we used a hotwire that sliced through a Geofoam block to create almost no waste pieces. Since the front side of every module was concurrent with the backside of the next one, such a decision allowed to operate just one cut per front side of each module. In this case, by having three cuts, two neighboring modules were fabricated. The form of the structure and its modules emerged from the constraints of the fabrication technique, aiming to establish a feedback loop between geometry, material, simulation, and tool. By cross-referencing geometric data across Grasshopper, a customized tessellation script was made to breakdown a vault into its modular ruled surface constructs.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	ecaade2020_240
id	ecaade2020_240
authors	Bouza, Hayley and Aºut, Serdar
year	2020
title	Advancing Reed-Based Architecture through Circular Digital Fabrication
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 117-126
doi	https://doi.org/10.52842/conf.ecaade.2020.1.117
summary	This paper presents a completed research project that proposes a new approach for creating circular buildings through the use of biodegradable, in situ resources with the help of computational design and digital fabrication technologies. Common Reed (Phragmites Australis) is an abundantly available natural material found throughout the world. Reed is typically used for thatch roofing in Europe, providing insulation and a weather-tight surface. Elsewhere, traditional techniques of weaving and bundling reeds have long been used to create entire buildings. The use of a digital production chain was explored as a means towards expanding the potential of reed as a sustainable, locally produced, construction material. Following an iterative process of designing from the micro to the macro scale and by experimenting with robotic assembly, the result is a reed-based system in the form of discrete components that can be configured to create a variety of structures.
keywords	Phragmites Australis; Reed; Discrete Design; Robotic Assembly; Circular Design; Biodegradable Architecture
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: