Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 574

Reformat results as: short short into frame detailed detailed into frame

_id	acadia20_142p
id	acadia20_142p
authors	Kilian, Axel
year	2020
title	The Flexing Room
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 142-147
summary	Robotics has been largely confined to the object category with fewer examples at the scale of buildings. Robotic buildings present unique challenges in communicating intent to the enclosed user. Precedent work in architectural robotics explored the performative dimension, the playful and interactive qualities, and the cognitive challenges of AI systems interacting with people in architecture. The Flexing Room robotic skeleton was installed at MIT at its full designed height for the first time and tested for two weeks in the summer of 2019. The approximately 13-foot-tall structure is comprised of 36 pneumatic actuators and an active bend fiberglass structure. The full height allowed for a wide range of postures the structure could take. Acoustic monitoring through Piezo pickup mics was added that allowed for basic rhythmic responses of the structure to people tapping or otherwise triggering the vibration sensors. Data streams were collected synchronously from Kinect skeleton tracking, piezo pickup mics, camera streams, and posture data. The emphasis in this test period was first to establish reliable hardware operations at full scale and second to record correlated data streams of the sensors installed in the structure together with the actuation triggers and the human poses of the inhabitant. The full-scale installation of hardware was successful and proved the feasibility of the structural and actuation approach previously tested on a one-level setup. The range of postures was increased and more transparent for the occupant. The perception of the structure as space was also improved as the system reached regular ceiling height and formed a clearer architectural scale enclosure. The ambition of communicating through architectural postures has not been achieved yet, but promising directions emerged from the test and data collection
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	ecaade2020_235
id	ecaade2020_235
authors	Li, Bin, Guo, Weihong, schnabel, Marc Aurel and Zhang, Ziqi
year	2020
title	Virtual Simulation of New Residential Buildings in Lingnan Using Vernacular Wisdom
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 269-278
doi	https://doi.org/10.52842/conf.ecaade.2020.1.269
summary	Every new idea has some sort of precedent or echoes from the past. It is the same for the new residential buildings in Lingnan, China. In Lingnan, the vernacular knowledge of building design has been established over thousands of years. Whether it is suitable for use today should be verified. In this research, virtual simulations are employed to arrive at an overall conclusion. Virtual simulations based on PHOENICS, ENVI_MET, CadnaA, and Ecotect software were separately used for analysing the case of new residential buildings located in Lingnan. The study analysed the wind, thermal, acoustic, and light environments, which are four aspects of these new residential buildings. According to the results of our research, the paper discussed ways to amend and improve the new residential buildings that sit within the overall spirit of the vernacular knowledge of Lingnan; thus, it helps to put the traditional knowledge into the current context. The vernacular knowledge from XS to XL scale contexts, such as Feng-shui, was verified as being suitable for use in Lingnan today.
keywords	Virtual simulation; Vernacular wisdom; Residential building; Lingnan; Feng-shui
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia20_84
id	acadia20_84
authors	Kirova, Nikol; Markopoulou, Areti
year	2020
title	Pedestrian Flow: Monitoring and Prediction
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 84-93.
doi	https://doi.org/10.52842/conf.acadia.2020.1.084
summary	The worldwide lockdowns during the first wave of the COVID-19 pandemic had an immense effect on the public space. The events brought up an opportunity to redesign mobility plans, streets, and sidewalks, making cities more resilient and adaptable. This paper builds on previous research of the authors that focused on the development of a graphene-based sensing material system applied to a smart pavement and utilized to obtain pedestrian spatiotemporal data. The necessary steps for gradual integration of the material system within the urban fabric are introduced as milestones toward predictive modeling and dynamic mobility reconfiguration. Based on the capacity of the smart pavement, the current research presents how data acquired through an agent-based pedestrian simulation is used to gain insight into mobility patterns. A range of maps representing pedestrian density, flow, and distancing are generated to visualize the simulated behavioral patterns. The methodology is used to identify areas with high density and, thus, high risk of transmitting airborne diseases. The insights gained are used to identify streets where additional space for pedestrians is needed to allow safe use of the public space. It is proposed that this is done by creating a dynamic mobility plan where temporal pedestrianization takes place at certain times of the day with minimal disruption of road traffic. Although this paper focuses mainly on the agent-based pedestrian simulation, the method can be used with real-time data acquired by the sensing material system for informed decision-making following otherwise-unpredictable pedestrian behavior. Finally, the simulated data is used within a predictive modeling framework to identify further steps for each agent; this is used as a proof-of-concept through which more insights can be gained with additional exploration.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia21_76
id	acadia21_76
authors	Smith, Rebecca
year	2021
title	Passive Listening and Evidence Collection
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 76-81.
doi	https://doi.org/10.52842/conf.acadia.2021.076
summary	In this paper, I present the commercial, urban-scale gunshot detection system ShotSpotter in contrast with a range of ecological sensing examples which monitor animal vocalizations. Gunshot detection sensors are used to alert law enforcement that a gunshot has occurred and to collect evidence. They are intertwined with processes of criminalization, in which the individual, rather than the collective, is targeted for punishment. Ecological sensors are used as a “passive” practice of information gathering which seeks to understand the health of a given ecosystem through monitoring population demographics, and to document the collective harms of anthropogenic change (Stowell and Sueur 2020). In both examples, the ability of sensing infrastructures to “join up and speed up” (Gabrys 2019, 1) is increasing with the use of machine learning to identify patterns and objects: a new form of expertise through which the differential agendas of these systems are implemented and made visible. I trace the differential agendas of these systems as they manifest through varied components: the spatial distribution of hardware in the existing urban environment and / or landscape; the software and other informational processes that organize and translate the data; the visualization of acoustical sensing data; the commercial factors surrounding the production of material components; and the apps, platforms, and other forms of media through which information is made available to different stakeholders. I take an interpretive and qualitative approach to the analysis of these systems as cultural artifacts (Winner 1980), to demonstrate how the political and social stakes of the technology are embedded throughout them.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	cdrf2019_265
id	cdrf2019_265
authors	Yue Qi, Ruqing Zhong, Benjamin Kaiser, Long Nguyen,Hans Jakob Wagner, Alexander Verl, and Achim Menges
year	2020
title	Working with Uncertainties: An Adaptive Fabrication Workflow for Bamboo Structures
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_25
summary	This paper presents and investigates a cyber-physical fabrication work-flow, which can respond to the deviations between built- and designed form in realtime with vision augmentation. We apply this method for large scale structures built from natural bamboo poles. Raw bamboo poles obtain evolutionarily optimized fibrous layouts ideally suitable for lightweight and sustainable building construction. Nevertheless, their intrinsically imprecise geometries pose a challenge for reliable, automated construction processes. Despite recent digital advancements, building with bamboo poles is still a labor-intensive task and restricted to building typologies where accuracy is of minor importance. The integration of structural bamboo poles with other building layers is often limited by tolerance issues at the interfaces, especially for large scale structures where deviations accumulate incrementally. To address these challenges, an adaptive fabrication process is developed, in which existing deviations can be compensated by changing the geometry of subsequent joints to iteratively correct the pose of further elements. A vision-based sensing system is employed to three-dimensionally scan the bamboo elements before and during construction. Computer vision algorithms are used to process and interpret the sensory data. The updated conditions are streamed to the computational model which computes tailor-made bending stiff joint geometries that can then be directly fabricated on-the-fly. In this paper, we contextualize our research and investigate the performance domains of the proposed workflow through initial fabrication tests. Several application scenarios are further proposed for full scale vision-augmented bamboo construction systems.
series	cdrf
email
last changed	2022/09/29 07:51

_id	ecaade2023_227
id	ecaade2023_227
authors	Moorhouse, Jon and Freeman, Tim
year	2023
title	Towards a Genome for Zero Carbon Retrofit of UK Housing
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 197–206
doi	https://doi.org/10.52842/conf.ecaade.2023.2.197
summary	The United Kingdom has some of the worst insulated housing stock in Northern Europe. This is in part due to the age of housing in the UK, with over 90% being built before 1990 [McCrone 2017, Piddington 2020]. Moreover, 85% of current UK housing will still be in use in 2050 by which stage their Government are targeting Net Carbon Zero [Eyre 2019]. Domestic energy use accounts for around 25% of UK carbon emissions. The UK will need to retrofit 20 million dwellings in order to meet this target. If this delivery were evenly spread, it would equate to over 2,000 retrofit completions each day. Government-funded initiatives are stimulating the market, with upwards of 60,000 social housing retrofits planned for 2023, but it is clear that a system must be developed to enable the design and implementation of housing-stock improvement at a large scale.This paper charts the 20-year development of a digital approach to the design for low-carbon domestic retrofit by architects Constructive Thinking Studio Limited and thence documents the emergence of a collaborative approach to retrofit patterns on a National scale. The author has led the Research and Development stream of this practice, developing a Building Information Modelling methodology and integrated Energy Modelling techniques to optimise design for housing retrofit [Georgiadou 2019, Ben 2020], and then inform a growing palette of details and a database of validated solutions [Moorhouse 2013] that can grow and be used to predict options for future projects [D’Angelo 2022]. The data is augmented by monitoring energy and environmental performance, enabling a growing body of knowledge that can be aligned with existing big data to simulate the benefits of nationwide stock improvement. The paper outlines incremental case studies and collaborative methods pivotal in developing this work The proposed outcome of the work is a Retrofit Genome that is available at a national level.
keywords	Retrofit, Housing, Zero-Carbon, BIM, Big Data, Design Genome
series	eCAADe
email
last changed	2023/12/10 10:49

_id	acadia20_474
id	acadia20_474
authors	Rossi, Gabriella; Walker, James; Sondergaard, Asborn; Worre Foged, Isak; Pasold, Anke; Hilmer, Jakob
year	2020
title	Design-to-Manufacture Workflows of Sound-Scattering Acoustic Brick Walls
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 474-483.
doi	https://doi.org/10.52842/conf.acadia.2020.1.474
summary	Improving speech intelligibility in classrooms enhances information dissemination, institutional knowledge capture, and quality of learning experience. While off-the-shelf solutions are available for acoustically retrofitting existing learning spaces, they do not allow for a fine-tuned context-specific intervention. However, this possibility is enabled through bespoke digital manufacturing informed by advanced digital simulations. In this research we explore and synchronize architecture, acoustics, computation, and fabrication for the making of better sound environments. We present performance-driven design-to-manufacture (DTM) workflows for sound-scattering brick elements. We reimagine the brick as an acoustically active geometry capable of modulating the sound experience in a university classroom by improving speech intelligibility. We contextualize our research within existing methods of digital performance-based design and robotic fabrication processes, namely wire cutting and pick-and-place applications. We then detail digital methods that combine heuristics and acoustic simulation to design the bricks within the 3D modeling environment, as well as describe the processes of robotic oscillating wire cutting and adaptive pick-and-place developed for the execution of the full-scale demonstrator. Finally, we report on the results of the acoustic analysis performed on the full-scale demonstrator in situ and laboratory measurements of a representative demonstrator which validates our design hypothesis.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia20_74
id	acadia20_74
authors	Bucklin, Oliver; Born, Larissa; Körner, Axel; Suzuki, Seiichi; Vasey, Lauren; T. Gresser, Götz; Knippers, Jan; Menges,
year	2020
title	Embedded Sensing and Control
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 74-83.
doi	https://doi.org/10.52842/conf.acadia.2020.1.074
summary	This paper investigates an interactive and adaptive control system for kinetic architectural applications with a distributed sensing and actuation network to control modular fiber-reinforced composite components. The aim of the project was to control the actuation of a foldable lightweight structure to generate programmatic changes. A server parses input commands and geometric feedback from embedded sensors and online data to drive physical actuation and generate a digital twin for real-time monitoring. Physical components are origami-like folding plates of glass and carbon-fiber-reinforced plastic, developed in parallel research. Accelerometer data is analyzed to determine component geometry. A component controller drives actuators to maintain or move towards desired positions. Touch sensors embedded within the material allow direct control, and an online user interface provides high-level kinematic goals to the system. A hierarchical control system parses various inputs and determines actuation based on safety protocols and prioritization algorithms. Development includes hardware and software to enable modular expansion. This research demonstrates strategies for embedded networks in interactive kinematic structures and opens the door for deeper investigations such as artificial intelligence in control algorithms, material computation, as well as real-time modeling and simulation of structural systems.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	artificial_intellicence2019_129
id	artificial_intellicence2019_129
authors	Hua Chai, Liming Zhang, and Philip F. Yuan
year	2020
title	Advanced Timber Construction Platform Multi-Robot System for Timber Structure Design and Prefabrication
source	Architectural Intelligence Selected Papers from the 1st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-15-6568-7_9
summary	Robotic Timber Construction has been widely researched in the last decade with remarkable advancements. While existing robotic timber construction technologies were mostly developed for specific tasks, integrated platforms aiming for industrialization has become a new trend. Through the integration of timber machining center and advanced robotics, this research tries to develop an advanced timber construction platform with multi-robot system. The Timber Construction Platform is designed as a combination of three parts: multi-robot system, sensing system, and control system. While equipped with basic functions of machining centers that allows multi-scale multifunctional timber components’ prefabrication, the platform also served as an experimental facility for innovative robotic timber construction techniques, and a service platform that integrates timber structure design and construction through real-time information collection and feedback. Thereby, this platform has the potential to be directly integrated into the timber construction industry, and contributes to a mass-customized mode of timber structures design and construction.
series	Architectural Intelligence
email
last changed	2022/09/29 07:28

_id	cdrf2019_124
id	cdrf2019_124
authors	Maider Llaguno-Munitxa and Elie Bou-Zeid
year	2020
title	Sensing the Environmental Neighborhoods Mobile Urban Sensing Technologies (MUST) for High Spatial Resolution Urban Environmental Mapping
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_12
summary	Given the benefits of fine mapping of large urban areas affordably, mobile environmental sensing technologies are becoming increasingly popular to complement the traditional stationary weather and air quality sensing stations. However the reliability and accuracy of low-cost mobile urban technologies is often questioned. This paper presents the design of a fast-response, autonomous and affordable Mobile Urban Sensing Technology (MUST) for the acquisition of high spatial resolution environmental data. Only when accurate neighborhood scale environmental data is affordable and accessible for architects, urban planners and policy makers, can design strategies to enhance urban health be effectively implemented. The results of an experimental air quality sensing campaign developed within Princeton University Campus is presented.
series	cdrf
email
last changed	2022/09/29 07:51

_id	acadia20_130
id	acadia20_130
authors	Newton, David
year	2020
title	Anxious Landscapes
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 130-137.
doi	https://doi.org/10.52842/conf.acadia.2020.2.130
summary	Advances in the field of machine learning over the last decade have revolutionized artificial intelligence by providing a flexible means to build analytic, predictive, and generative models from large datasets, but the allied design disciplines have yet to apply these tools at the urban level to draw analytic insights on how the built environment might impact human health. Previous research has found numerous correlations between the built environment and both physical and mental health outcomes—suggesting that the design of our cities may have significant impacts on human health. Developing methods of analysis that can provide insight on the correlations between the built environment and human health could help the allied design disciplines shape our cities in ways that promote human health. This research addresses these issues and contributes knowledge on the use of deep learning (DL) methods for urban analysis and mental health, specifically anxiety. Mental health disorders, such as anxiety, have been estimated to account for the largest proportion of global disease burden. The methods presented allow architects, planners, and urban designers to make use of large remote-sensing datasets (e.g., satellite and aerial images) for design workflows involving analysis and generative design tasks. The research also contributes insight on correlations between anxiety prevalence and specific urban design features—providing actionable intelligence for the planning and design of the urban fabric.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ijac202018405
id	ijac202018405
authors	Olga Mesa, Saurabh Mhatre and Dan Aukes
year	2020
title	CREASE: Synchronous gait by minimizing actuation through folded geometry
source	International Journal of Architectural Computing vol. 18 - no. 4, 385–403
summary	The Age of the Fourth Industrial Revolution promises the integration and synergy of disciplines to arrive at meaningful and comprehensive solutions. As computation and fabrication methods become pervasive, they present platforms for communication. Value exists in diverse disciplines bringing their approach to a common conversation, proposing demands, and potentials in response to entrenched challenges. Robotics has expanded recently as computational analysis, and digital fabrication methods are more accurate and reliable. Advances in functional microelectromechanical components have resulted in the design of new robots presenting alternatives to traditional ambulatory robots. However, most examples are the result of intense computational analysis necessitating engineering expertise and specialized manufacturing. Accessible fabrication methods like laminate techniques propose alternatives to new robot morphologies. However, most examples remain overly actuated without harnessing the full potential of folds for locomotion. Our research explores the connection between origami structures and kinematics for the generation of an ambulatory robot presenting efficient, controlled, and graceful gait with minimal use of components. Our robot ‘Crease’ achieves complex gait by harnessing kinematic origami chains rather than relying on motors. Minimal actuation activates the folds to produce variations in walk and direction. Integrating a physical iterative process with computational analysis, several prototypes were generated at different scales, including untethered ones with sensing and steering that could map their environment. Furthering the dialogue between disciplines, this research contributes not only to the field of robotics but also architectural design, where efficiency, adjustability, and ease of fabrication are critical in designing kinetic elements.
keywords	Digitals fabrication, robotics, origami, laminate construction, smart geometry, digital manufacturing and materials, smart materials
series	journal
email
last changed	2021/06/03 23:29

_id	ijac202018202
id	ijac202018202
authors	Pasquero, Claudia and Marco Poletto
year	2020
title	Bio-digital aesthetics as value system of post-Anthropocene architecture
source	International Journal of Architectural Computing vol. 18 - no. 2, 120-140
summary	It is timely within the Anthropocene era, more than ever before, to search for a non-anthropocentric mode of reasoning, and consequently designing. The PhotoSynthetica Consortium, established in 2018 and including London-based ecoLogicStudio, the Urban Morphogenesis Lab (Bartlett School of Architecture, University College London) and the Synthetic Landscape Lab (University of Innsbruck, Austria), has therefore been pursuing architecture as a research-based practice, exploring the interdependence of digital and biological intelligence in design by working directly with non-human living organisms. The research focuses on the diagrammatic capacity of these organisms in the process of growing and becoming part of complex bio-digital architectures. A key remit is training architects’ sensibility at recognising patterns of reasoning across disciplines, materialities and technological regimes, thus expanding the practice’s repertoire of aesthetic qualities. Recent developments in evolutionary psychology demonstrate that the human sense of beauty and pleasure is part of a co-evolutionary system of mind and surrounding environment. In these terms, human senses of beauty and pleasure have evolved as selection mechanisms. Cultivating and enhancing them compensate and integrate the functions of logical thinking to gain a systemic view on the planet Earth and the dramatic changes it is currently undergoing. This article seeks to illustrate, through a series of recent research projects, how a renewed appreciation of beauty in architecture has evolved into an operational tool to design and measure its actual ecological intelligence.
keywords	Bio-digital, bio-computation, bio-city, effectiveness, empathy, impact, sensing
series	journal
email
last changed	2020/11/02 13:34

_id	ecaade2020_138
id	ecaade2020_138
authors	Patel, Sayjel Vijay, Tchakerian, Raffi, Lemos Morais, Renata, Zhang, Jie and Cropper, Simon
year	2020
title	The Emoting City - Designing feeling and artificial empathy in mediated environments
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 261-270
doi	https://doi.org/10.52842/conf.ecaade.2020.2.261
summary	This paper presents a theoretical blueprint for implementing artificial empathy into the built environment. Transdisciplinary design principles have oriented the creation of a new model for autonomous environments integrating psychology, architecture, digital media, affective computing and interactive UX design. 'The Emoting City', an interactive installation presented at the 2019 Shenzhen Bi-City Biennale of Urbanism/Architecture, is presented as a first step to explore how to engage AI-driven sensing by integrating human perception, cognition and behaviour in a real-world scenario. The approach described encompasses two main elements: embedded cyberception and responsive surfaces. Its human-AI interface enables new modes of blended interaction that are conducive to self-empathy and insight. It brings forth a new proposition for the development of sensing systems that go beyond social robotics into the field of artificial empathy. The installation innovates in the design of seamless affective computing that combines 'alloplastic' and 'autoplastic' architectures. We believe that our research signals the emergence of a potential revolution in responsive environments, offering a glimpse into the possibility of designing intelligent spaces with the ability to sense, inform and respond to human emotional states in ways that promote personal, cultural and social evolution.
keywords	Artificial Intelligence; Responsive Architecture; Affective Computation; Human-AI Interfaces; Artificial Empathy
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2020_222
id	caadria2020_222
authors	Sun, Chengyu and Hu, Wei
year	2020
title	A Rapid Building Density Survey Method Based on Improved Unet
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 649-658
doi	https://doi.org/10.52842/conf.caadria.2020.2.649
summary	How to rapidly obtain building density information in a large range is a key problem for architecture and planning. This is because architectural design or urban planning is not isolated, and the environment of the building is influenced by the distribution of other buildings in a larger area. For areas where building density data are not readily available, the current methods to estimate building density are more or less inadequate. For example, the manual survey method is relatively slow and expensive, the traditional satellite image processing method is not very accurate or needs to purchase high-precision multispectral remote sensing image from satellite companies. Based on the deep neural network, this paper proposes a method to quickly extract large-scale building density information by using open satellite images platforms such as Baidu map, Google Earth, etc., and optimizes the application in the field of building and planning. Compared with the traditional method, it has the advantages of less time and money, higher precision, and can provide data support for architectural design and regional planning rapidly and conveniently.
keywords	building density; rapidly and conveniently; neural network
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia20_66
id	acadia20_66
authors	Aviv, Dorit; Wang, Zherui; Meggers, Forrest; Ida, Aletheia
year	2020
title	Surface Generation of Radiatively-Cooled Building Skin for Desert Climate
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 66-73.
doi	https://doi.org/10.52842/conf.acadia.2020.1.066
summary	A radiatively cooled translucent building skin is developed for desert climates, constructed out of pockets of high heat-capacity liquids. The liquids are contained by a wavelength-selective membrane enclosure, which is transmissive in the infrared range of electromagnetic radiation but reflective in the shortwave range, and therefore prevents overheating from solar radiation and at the same time allows for passive cooling through exposure of its thermal mass to the desert sky. To assess the relationship between the form and performance of this envelope design, we develop a feedback loop between computational simulations, analytical models, and physical tests. We conduct a series of simulations and bench-scale experiments to determine the thermal behavior of the proposed skin and its cooling potential. Several materials are considered for their thermal storage capacity. Hydrogel cast into membrane enclosures is tested in real climate conditions. Slurry phase change materials (PCM) are also considered for their additional heat storage capacity. Challenges of membrane welding patterns and nonuniform expansion of the membrane due to the weight of the enclosed liquid are examined in both digital simulations and physical experiments. A workflow is proposed between the radiation analysis based on climate data, the formfinding simulations of the elastic membrane under the liquid weight, and the thermal storage capacity of the overall skin.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2020_233
id	caadria2020_233
authors	Bar-Sinai, Karen Lee, Shaked, Tom and Sprecher, Aaron
year	2020
title	Sensibility at Large - A Post-Anthropocene Vision for Architectural Landscape Editing
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 223-232
doi	https://doi.org/10.52842/conf.caadria.2020.2.223
summary	The irreversible imprint of humankind on Earth calls for revisiting current construction practices. This paper forwards a vision for post-Anthropocene, large-scale, architectural, and landscape construction. This vision relates to transforming natural terrains into architecture using on-site robotic tools and enabling greater sustainability through increased sensibility. Despite advancements in large-scale digital fabrication in architecture, the field still mainly focuses on the production of objects. The proposed vision aims to advance theory and practice towards territorial scale digital fabrication of environments. Three notions are proposed: material-aware construction, large-scale customization, and integrated fabrication. These aspects are demonstrated through research and teaching projects. Using scale models, they explore the deployment of robotic tools toward reforming, stabilizing, and reconstituting soil in an architectural context. Together, they propose a theoretical ground for in situ digital fabrication for a new era, relinking architecture to the terrains upon which it is formed.
keywords	Digital Fabrication; territorial scale; on-site robotics; geomaterials; computational design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2020_449
id	sigradi2020_449
authors	Becerra-Santacruz, Habid; Becerra-Santacruz, Axel
year	2020
title	Mapping of emerging territorial phenomena at Micro Scale: Development of collaborative database as a base for Evidence-Based Design Strategies
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 449-454
summary	This paper presents an active analysis and research approach for design workshops at the Faculty of Architecture at UMNSH. The proposed scheme for final year design studio demands students to participate in the confrontation of reality to understand first-hand through databases; the complex problems of contemporary society and its relationship with the habitat. In order to understand the diverse emergent phenomena of the city, a collaborative work is implemented for the development of a database, occupation maps and territorial dynamics on a micro scale. From the evidence supported by data, students articulate design strategies and specific territorial actions.
keywords	Collaborative database, Evidence-based design strategies, Emergent phenomena mapping, Design pedagogy
series	SIGraDi
email
last changed	2021/07/16 11:49

_id	acadia20_226p
id	acadia20_226p
authors	Borhani, Alireza; Kalantar, Negar
year	2020
title	Interlocking Shell
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 226-231
summary	With a specific focus on robotic stereotomy, two full-scale vault structures were designed to explore the potential of self-standing building structures made from interlocking components; these structures were fabricated with a track-mounted industrial-scale robot (ABB 4600). To respond to the economic affordances of robotic subtractive cutting, all uniquely shaped structural modules came from one block of material (48"" x96"" x36""). Through the discretization of curvilinear tessellated vault surfaces into a limited number of uniquely shaped modules with embedded form-fitting connectors, the project exhibited the potential for programming a robot to cut ruled surfaces to produce freeform shells of any kind. Representing nearly zero-waste construction, the developed technology can potentially be used for self-supporting emergency shelters and field medical clinics, facilitating easy shipping and speedy assembly. Without using any scaffolding, a few people can erect and dismantle an entire mortar-free structure at the construction site. The disassembled structure occupies minimal space in storage, and the structure’s pieces can be transported to the site in stacks. Robot milling is a common technique for removing material to transform a block into a sculptural shape. Unlike milling techniques that produce significant waste, we used a hotwire that sliced through a Geofoam block to create almost no waste pieces. Since the front side of every module was concurrent with the backside of the next one, such a decision allowed to operate just one cut per front side of each module. In this case, by having three cuts, two neighboring modules were fabricated. The form of the structure and its modules emerged from the constraints of the fabrication technique, aiming to establish a feedback loop between geometry, material, simulation, and tool. By cross-referencing geometric data across Grasshopper, a customized tessellation script was made to breakdown a vault into its modular ruled surface constructs.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	acadia20_436
id	acadia20_436
authors	Chun Hin Fong, Jacky; Long Wun Poon, Adabelle; Sze Ngan, Wing; Hei Ho, Chung; Goepel, Garvin; Crolla, Kristof
year	2020
title	Augmenting Craft with Mixed Reality
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 436-444.
doi	https://doi.org/10.52842/conf.acadia.2020.1.436
summary	This paper discusses novel methods for and advantages of integrating augmented reality (AR) and photogrammetry in hand clay-sculpting workflows. These techniques permit nontrained users to achieve higher precision during the sculpting process by holographically overlaying instructions from digital 3D source geometry on top of the sculpting material. By employing alternative notational systems in design implementation methods, the research positions itself in a postdigital context aimed at humanizing digital technologies. Throughout history, devices have been developed to increase production, such as Henry Dexter’s 1842 “Apparatus for Sculptors” for marble sculpting. Extrapolating from this, the workflow presented in this paper uses AR to overlay extracted information from 3D models directly onto the sculptor’s field of vision. This information can then become an AR-driven guidance system that assists the sculptor. Using the Microsoft HoloLens, holographic instructions are introduced in the production sequence, connecting the analog sculpture fabrication directly with a digital environment, thus augmenting the craftspeople’s agency. A series of AR-aided sculpting methods were developed and tested in a demonstrator case study project that created a small-scale clay copy of Henry Moore’s Sheep Piece (1971–1972). This paper demonstrates how user-friendly software and hardware tools have lowered the threshold for end users to develop new methods that straightforwardly facilitate and improve their crafts’ effectiveness and agency. This shows that the fusion of computational design technology and AR visualization technology can innovate a specific craft’s design and production workflow, opening the door for further application developments in more architecture-specific fabrication contexts.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

For more results click below: