Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 653

Reformat results as: short short into frame detailed detailed into frame

_id	acadia20_516
id	acadia20_516
authors	Aghaei Meibodi, Mania; Voltl, Christopher; Craney, Ryan
year	2020
title	Additive Thermoplastic Formwork for Freeform Concrete Columns
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 516-525.
doi	https://doi.org/10.52842/conf.acadia.2020.1.516
summary	The degree of geometric complexity a concrete element can assume is directly linked to our ability to fabricate its formwork. Additive manufacturing allows fabrication of freeform formwork and expands the design possibilities for concrete elements. In particular, fused deposition modeling (FDM) 3D printing of thermoplastic is a useful method of formwork fabrication due to the lightweight properties of the resulting formwork and the accessibility of FDM 3D printing technology. The research in this area is in early stages of development, including several existing efforts examining the 3D printing of a single material for formwork— including two medium-scale projects using PLA and PVA. However, the performance of 3D printed formwork and its geometric complexity varies, depending on the material used for 3D printing the formwork. To expand the existing research, this paper reviews the opportunities and challenges of using 3D printed thermoplastic formwork for fabricating custom concrete elements using multiple thermoplastic materials. This research cross-references and investigates PLA, PVA, PETG, and the combination of PLA-PVA as formwork material, through the design and fabrication of nonstandard structural concrete columns. The formwork was produced using robotic pellet extrusion and filament-based 3D printing. A series of case studies showcase the increased geometric freedom achievable in formwork when 3D printing with multiple materials. They investigate the potential variations in fabrication methods and their print characteristics when using different 3D printing technologies and printing materials. Additionally, the research compares speed, cost, geometric freedom, and surface resolution.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ijac202018102
id	ijac202018102
authors	Seifert, Nils; Michael Mühlhaus and Frank Petzold
year	2020
title	Urban strategy playground: Rethinking the urban planner’s toolbox
source	International Journal of Architectural Computing vol. 18 - no. 1, 20-40
summary	This article presents the results of the Urban Strategy Playground research group. Over the last 5 years, the focus of an interdisciplinary team of researchers was the conception, implementation and evaluation of a decision-support system for inner-city urban and architectural planning. The overall aim of past and ongoing research is to enable planners to validate and compare possible planning measures based on objective criteria. The Urban Strategy Playground software framework is an expandable toolbox that supports planners in developing strategies, evaluating them and visually preparing them for political decision-making processes and public participation. Examples of implemented tools are the simulation and monitoring of building codes, analysis of key density indicators and green space provision, simulation of shading, building energy and noise dispersion. For visualising the planning results, the framework provides interfaces for rapid prototyping of haptic models, as well as web viewers and a connection to Augmented Reality applications. Core aspects of the system were evaluated through case studies in cooperation with urban planning offices, housing companies and municipalities, proving feasibility, high acceptance of the decision-support software, and need for more tailored tools.
keywords	Urban planning, decision support, participation, augmented reality, 3D printing, visual programming, 3D city model
series	journal
email
last changed	2020/11/02 13:34

_id	acadia20_236p
id	acadia20_236p
authors	Anton, Ana; Jipa, Andrei; Reiter, Lex; Dillenburger, Benjamin
year	2020
title	Fast Complexity
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 236-241
summary	The concrete industry is responsible for 8% of the global CO2 emissions. Therefore, using concrete in more complex and optimized shapes can have a significant benefit to the environment. Digital fabrication with concrete aims to overcome the geometric limitations of standardized formworks and thereby reduce the ecological footprint of the building industry. One of the most significant material economy potentials is in structural slabs because they represent 85% of the weight of multi-story concrete structures. To address this opportunity, Fast Complexity proposes an automated fabrication process for highly optimized slabs with ornamented soffits. The method combines reusable 3D-printed formwork (3DPF) and 3D concrete printing (3DCP). 3DPF uses binder-jetting, a process with submillimetre resolution. A polyester coating is applied to ensure reusability and smooth concrete surfaces otherwise not achievable with 3DCP alone. 3DPF is selectively used only where high-quality finishing is necessary, while all other surfaces are fabricated formwork-free with 3DCP. The 3DCP process was developed interdisciplinary at ETH Zürich and employs a two-component material system consisting of Portland cement mortar and calcium aluminate cement accelerator paste. This fabrication process provides a seamless transition from digital casting to 3DCP in a continuous automated process. Fast Complexity selectively uses two complementary additive manufacturing methods, optimizing the fabrication speed. In this regard, the prototype exhibits two different surface qualities, reflecting the specific resolutions of the two digital processes. 3DCP inherits the fine resolution of the 3DPF strictly for the smooth, visible surfaces of the soffit, for which aesthetics are essential. In contrast, the hidden parts of the slab use the coarse resolution specific to the 3DCP process, not requiring any formwork and implicitly achieving faster fabrication. In the context of an increased interest in construction additive manufacturing, Fast Complexity explicitly addresses the low resolution, lack of geometric freedom, and limited reinforcement options typical to layered extrusion 3DCP, as well as the limited customizability in concrete technology.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	sigradi2020_297
id	sigradi2020_297
authors	Arboleda Pardo, Juan Gabriel; García-Alvarado, Rodrigo; Martínez Rocamora, Alejandro
year	2020
title	BIM-modeling and programming of curved concrete walls for 3D-printed construction
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 297-305
summary	This article presents the parametric design and modeling in BIM of curved walls for 3d-printed construction in concrete, seeking to manage the reduction of materials and construction execution times, and enhance its architectural expression. The process described here is structured in the following phases: (i) conceptual preliminary design exploration, defining formal parameters in Revit, (ii) parametric modeling with Dynamo and Revit, (iii) integration of structural validation and printing programming of the robotic arm, and examples of execution with 3D-printed construction.
keywords	BIM, Parametric programming, 3D-printed Construction, Curved wall, Digital fabrication
series	SIGraDi
email
last changed	2021/07/16 11:49

_id	acadia20_202p
id	acadia20_202p
authors	Battaglia, Christopher A.; Verian, Kho; Miller, Martin F.
year	2020
title	DE:Stress Pavilion
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 202-207
summary	Print-Cast Concrete investigates concrete 3D printing utilizing robotically fabricated recyclable green sand molds for the fabrication of thin shell architecture. The presented process expedites the production of doubly curved concrete geometries by replacing traditional formwork casting or horizontal corbeling with spatial concrete arching by developing a three-dimensional extrusion path for deposition. Creating robust non-zero Gaussian curvature in concrete, this method increases fabrication speed for mass customized elements eliminating two-part mold casting by combining robotic 3D printing and extrusion casting. Through the casting component of this method, concrete 3D prints have greater resolution along the edge condition resulting in tighter assembly tolerances between multiple aggregated components. Print-Cast Concrete was developed to produce a full-scale architectural installation commissioned for Exhibit Columbus 2019. The concrete 3D printed compression shell spanned 12 meters in length, 5 meters in width, and 3 meters in height and consisted of 110 bespoke panels ranging in weight of 45 kg to 160 kg per panel. Geometrical constraints were determined by the bounding box of compressed sand mold blanks and tooling parameters of both CNC milling and concrete extrusion. Using this construction method, the project was able to be assembled and disassembled within the timeframe of the temporary outdoor exhibit, produce <1% of waste mortar material in fabrication, and utilize 60% less material to construct than cast-in-place construction. Using the sand mold to contain geometric edge conditions, the Print-Cast technique allows for precise aggregation tolerances. To increase the pavilions resistance to shear forces, interlocking nesting geometries are integrated into each edge condition of the panels with .785 radians of the undercut. Over extruding strategically during the printing process casts the undulating surface with accuracy. When nested together, the edge condition informs both the construction logic of the panel’s placement and orientation for the concrete panelized shell.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	ecaade2023_99
id	ecaade2023_99
authors	Dervishaj, Arlind, Fonsati, Arianna, Hernández Vargas, José and Gudmundsson, Kjartan
year	2023
title	Modelling Precast Concrete for a Circular Economy in the Built Environment
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 177–186
doi	https://doi.org/10.52842/conf.ecaade.2023.2.177
summary	In recent years, there has been a growing interest in adopting circular approaches in the built environment, specifically reusing existing buildings or their components in new projects. To achieve this, drawings, laser scanning, photogrammetry and other techniques are used to capture data on buildings and their materials. Although previous studies have explored scan-to-BIM workflows, automation of 2D drawings to 3D models, and machine learning for identifying building components and materials, a significant gap remains in refining this data into the right level of information required for digital twins, to share information and for digital collaboration in designing for reuse. To address this gap, this paper proposes digital guidelines for reusing precast concrete based on the level of information need (LOIN) standard EN 17412-1:2020 and examines several CAD and BIM modelling strategies. These guidelines can be used to prepare digital templates that become digital twins of existing elements, develop information requirements for use cases, and facilitate data integration and sharing for a circular built environment.
keywords	building information modelling (BIM), circular construction, reuse, concrete
series	eCAADe
email
last changed	2023/12/10 10:49

_id	acadia20_192p
id	acadia20_192p
authors	Doyle, Shelby; Hunt, Erin
year	2020
title	Melting 2.0
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 192-197
summary	This project presents computational design and fabrication methods for locating standard steel reinforcement within 3D printed water-soluble PVA (polyvinyl alcohol) molds to create non-standard concrete columns. Previous methods from “Melting: Augmenting Concrete Columns with Water Soluble 3D Printed Formwork” and “Dissolvable 3D Printed Formwork: Exploring Additive Manufacturing for Reinforced Concrete” (Doyle & Hunt 2019) were adapted for larger-scale construction, including the introduction of new hardware, development of custom programming strategies, and updated digital fabrication techniques. Initial research plans included 3D printing continuous PVA formwork with a KUKA Agilus Kr10 R1100 industrial robotic arm. However, COVID-19 university campus closures led to fabrication shifting to the author’s home, and this phase instead relied upon a LulzBot TAZ 6 (build volume of 280 mm x 280 mm x 250 mm) with an HS+ (Hardened Steel) tool head (1.2 mm nozzle diameter). Two methods were developed for this project phase: new 3D printing hardware and custom GCode production. The methods were then evaluated in the fabrication of three non-standard columns designed around five standard reinforcement bars (3/8-inch diameter): Woven, Twisted, Aperture. Each test column was eight inches in diameter (the same size as a standard Sonotube concrete form) and 4 feet tall, approximately half the height of an architecturally scaled 8-foot-tall column. Each column’s form was generated from combining these diameter and height restrictions with the constraints of standard reinforcement placement and minimum concrete coverage. The formwork was then printed, assembled, cast, and then submerged in water to dissolve the molds to reveal the cast concrete. This mold dissolving process limits the applicable scale for the work as it transitions from the research lab to the construction site. Therefore, the final column was placed outside with its mold intact to explore if humidity and water alone can dissolve the PVA formwork in lieu of submersion.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	sigradi2020_312
id	sigradi2020_312
authors	Farrokhsiar, Paniz; Gursoy, Benay
year	2020
title	Robotic Sketching: A Study on Robotic Clay 3D Printing
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 312-319
summary	Digital fabrication tools are typically employed to materialize a fixed design. Design limits the choice of material; Natural material behavior may consider as flaws in the fabrication. What if these tools and material behaviors being used as sketching tools to generate new design ideas? In this paper, we present a workflow in which digital fabrication tools, specifically robotic arms, are used as sketching tools. It is called robotic sketching; The goal is to sketch with effects of fabrication settings on emerging behaviors of materials in first steps of design. We exemplify this workflow with a case on robotic clay 3D printing.
keywords	Digital fabrication, Sketching, Additive manufacturing, 3D printing with clay, Robotic
series	SIGraDi
email
last changed	2021/07/16 11:49

_id	acadia20_382
id	acadia20_382
authors	Hosmer, Tyson; Tigas, Panagiotis; Reeves, David; He, Ziming
year	2020
title	Spatial Assembly with Self-Play Reinforcement Learning
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 382-393.
doi	https://doi.org/10.52842/conf.acadia.2020.1.382
summary	We present a framework to generate intelligent spatial assemblies from sets of digitally encoded spatial parts designed by the architect with embedded principles of prefabrication, assembly awareness, and reconfigurability. The methodology includes a bespoke constraint-solving algorithm for autonomously assembling 3D geometries into larger spatial compositions for the built environment. A series of graph-based analysis methods are applied to each assembly to extract performance metrics related to architectural space-making goals, including structural stability, material density, spatial segmentation, connectivity, and spatial distribution. Together with the constraint-based assembly algorithm and analysis methods, we have integrated a novel application of deep reinforcement (RL) learning for training the models to improve at matching the multiperformance goals established by the user through self-play. RL is applied to improve the selection and sequencing of parts while considering local and global objectives. The user’s design intent is embedded through the design of partial units of 3D space with embedded fabrication principles and their relational constraints over how they connect to each other and the quantifiable goals to drive the distribution of effective features. The methodology has been developed over three years through three case study projects called ArchiGo (2017–2018), NoMAS (2018–2019), and IRSILA (2019-2020). Each demonstrates the potential for buildings with reconfigurable and adaptive life cycles.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2020_047
id	caadria2020_047
authors	Lee, Han Jie, Lin, Zhuoli, Zhang, Ji and Janssen, Patrick
year	2020
title	Irradiance Mappinig for Large Scale City Models
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 803-812
doi	https://doi.org/10.52842/conf.caadria.2020.1.803
summary	This paper reports on the development of a geocomputational simulation workflow for the irradiance mapping of large scale city models. A fully automated workflow is presented, for importing CityGML city models, generating the simulation input models, executing the simulations, and aggregating the results. In order to speed up the overall processing time, the workflow uses parallel processing across multiple computers and multiple cores. Two case studies are presented, for Singapore and for Rotterdam.
keywords	Integrated irradiance simulation; Solar potential assessment ; Large scale urban 3D model; Houdini; Radiance
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2020_264
id	ecaade2020_264
authors	Nicholas, Paul, Rossi, Gabriella, Papadopoulou, Iliana, Tamke, Martin, Aalund Brandt, Nikolaj and Jessen Hansen, Leif
year	2020
title	Precision Partner - Enhancing GFRC craftsmanship with industry 4.0 factory-floor feedback
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 631-640
doi	https://doi.org/10.52842/conf.ecaade.2020.2.631
summary	This paper presents a novel human-machine collaborative approach to automatic quality-control of Glass-Fiber Reinforced Concrete (GFRC) molds directly on the factory floor. The framework introduces Industry 4.0 technologies to enhance the ability of skilled craftsmen to make molds through the provision of horizontal feedback regarding dimensional tolerances. Where digital tools are seldom used in the fabrication of GFRC molds, and expert craftsmen are not digital experts, our implementation of automated registration and feedback processes enables craftsmen to be integrated into and gain value from the digital production chain. In this paper, we describe the in-progress framework, Precision Partner, which connects 3d scanning and point cloud registration of geometrically complex and varied one off elements to factory floor dimensional feedback. We firstly introduce the production context of GFRC molds, as well as industry standards for production feedback. We then detail our methods, and report the results of a case study that tests the framework on the case of a balcony element.
keywords	3d Scanning; GFRC; Feedback; Automation; Human in the loop; Digital Chain
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2021_011
id	ecaade2021_011
authors	Nováková, Kateøina and Vele, Jiøí
year	2021
title	Prvok - An experiment with 3D printing large doublecurved concrete structure
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 137-144
doi	https://doi.org/10.52842/conf.ecaade.2021.2.137
summary	In this experimental research project we report on the manufacturing process of the first full-size 3D printed concrete structure in our country. The house was 3D printed by an ABB IRB 6700 robot whose range we made fit with the requirements for transportation size and also, its range determined the size and geometry of the house. During the transformation process from sketch to code we involved students to apply computational design methods. We designed the main load bearing structure which had to be thinnest and lightest possible together with its insulation features and printability. We were aware of the world-wide research in this field started by NASA centennial Challenge called 3D-printed-habitat [Roman,2020] as well as start-ups derived from this research [1,2,3,4]. During the project, we investigated the following matters: (1) the relationship between geometry of the wall in model and in practice (2), setting of the robot and the mixture; and (3) stress test of the wall. With the results of the test we aimed at contribution to standardisation of 3D printed structures in ISO/ASTM 52939:2021. The finalized structure, named "Prvok", was made to prove printability of the mixture and stability of the design.
keywords	3D printing; robot; concrete; grasshopper; experiment; house
series	eCAADe
email
last changed	2022/06/07 07:58

_id	cdrf2019_255
id	cdrf2019_255
authors	Qian Wan, Li Wang, and Guowei Ma
year	2020
title	Adaptable Tool-Path Planning Method for 3D Concrete Printing Based on the Mapping Method
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_24
summary	3D concrete printing (3DCP) has been successfully and widely applied in the fields of civil structure, infrastructure, architectural decoration etc.,due to its unique advantages of automation and flexibility, and has shown great potential for development. One of the key steps in the execution of 3DCP is the toolpath planning process. However, 3DCP typically utilize the flowable composite materials which changes with time, and it is easy to induce interface joints or filling defects due to uneven path distribution when constructing the irregularshaped construction. To solve the problem of printing path planning in 3DCP, this paper proposes tool-path planning based on mapping method, which integrates the rheology and necessary continuity of concrete materials into the printing process parameters, improves the mutual adaptability of printing process and material characteristics, improves the continuity of printing, the compactness of filling, and then ensures the stability and durability of printing structure.
series	cdrf
email
last changed	2022/09/29 07:51

_id	sigradi2020_855
id	sigradi2020_855
authors	Salinas Arriagada, Alexis; García Alvarado, Rodrigo; Carrasco Perez, Patricio
year	2020
title	Bio-mimetic design for architecture built by 3D robotic printing
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 855-862
summary	This work presents a parametric development for Architecture by 3D printing, through robotic arms. It addresses a bio-mimetic design approach based on morphological features of animal beings, and develops a spectrum of design possibilities for vertical pieces. The measurements arising from the process extrusion and the possibilities of eccentricity of the manufacturing cord are exposed. As well as variables for design, like the own gravitational restrictions and vertical growth, both in morphological and constructive logic, as a search for relationships closer to the natural world. Suggesting that the new deposition construction systems call for an architecture based on biological principles.
keywords	Architecture, Parametric Design, Bio-mimetic, Robotics, 3D-Printed Construction
series	SIGraDi
email
last changed	2021/07/16 11:53

_id	caadria2020_359
id	caadria2020_359
authors	Vivanco, Tomas, Valencia, Antonia and Yuan, Philip F.
year	2020
title	4D printing: Computational Mechanical Design of Bi-dimensional 3D Printed Patterns over Tensioned Textiles for Low-energy Three-dimensional Volumes.
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 193-202
doi	https://doi.org/10.52842/conf.caadria.2020.1.193
summary	From the distribution of the embedded energy in materials, can be operated in order to design and produce optimized material systems with minimum use of external energy to achieve its maximum three-dimensional capacity within their mechanical constraints. This research studies the process of 3D printing bidimensional layers over a tensioned fabric to generate three-dimensional shapes. After the tension of the fabric is released, the printed pattern generates tension and compression over the textile, which conduce and distribute the internal forces generating a controlled deformation with a final form. Digital simulation of finite anticlastic shapes and parametric design under mechanical constraints of the material used to predict and compare both physical and digital forms. These allow us to evaluate and optimize the printed pattern in order to decrease the amount of used energy and material to produce a performative shape.
keywords	4d printing; material computation; digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2020_172
id	caadria2020_172
authors	Xia, Xinyu and Tong, Ziyu
year	2020
title	A Machine Learning-Based Method for Predicting Urban Land Use
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 21-30
doi	https://doi.org/10.52842/conf.caadria.2020.2.021
summary	Land use is one of the most basic elements of urban management. In urban planning and design, land use is often determined by experience and case studies. However, the development of urbanization has led to a combinatory trend for land use, and the land use of a plot is always impacted by the surrounding environment. In such a complex situation, it is difficult to find hidden relationships among types of land use by humans alone. Within artificial intelligence, machine learning can help find correlations among data. This paper presents a new method for learning the rules relating the known land use data and predicting the land use of a target plot by constructing an artificial neural network. We take Nanjing as a specific case and study the logic of its land use. The results not only demonstrate associations between the surroundings and the target but also show the feasibility of a combinatory land use index in urban planning and design.
keywords	Land use; Urban planning and design; Machine learning; Artificial neural network
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2020_009
id	caadria2020_009
authors	Wang, Likai, Chen, Kian Wee, Janssen, Patrick and Ji, Guohua
year	2020
title	Algorithmic generation of architectural Massing Models for building design optimisation - Parametric Modelling Using Subtractive and Additive Form Generation Principles
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 385-394
doi	https://doi.org/10.52842/conf.caadria.2020.1.385
summary	Using performance-based optimisation to explore unknown design solutions space has become widely acknowledged and considered an efficient approach to designing high-performing buildings. However, the lack of design diversity in the design space defined by the parametric model often confines the search of the optimisation process to a family of similar design variants. In order to overcome this weakness, this paper presents two parametric massing generation algorithms based on the additive and subtractive form generation principles. By abstracting the rule of these two principles, the algorithms can generate diverse building massing design alternatives. This allows the algorithms to be used in performance-based optimisation for exploring a wide range of design alternatives guided by various performance objectives. Two case studies of passive solar energy optimisation are presented to demonstrate the efficacy of the algorithm in helping architects achieve an explorative performance-based optimisation process.
keywords	parametric massing algorithms; performance-based optimisation; design exploration; solar irradiation
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2020_484
id	ecaade2020_484
authors	Aguilar, Pavel, Borunda, Luis and Pardal, Cristina
year	2020
title	Additive Manufacturing of Variable-Density Ceramics, Photocatalytic and Filtering Slats
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 97-106
doi	https://doi.org/10.52842/conf.ecaade.2020.1.097
summary	Additive Manufacturing (AM) offers the potential development of novel architectural applications of ceramic building components that can be engineered at the level of material to the extent of designing its performance and properties by density variations. This research presents a computational method and fabrication technique emulating complex material behavior via AM of intricate geometries and presents components with photocatalytic and climatic properties. It proposes an innovative application of AM of ceramic components in architecture to explore potential bioclimatic and antipollution performative use. Lattices are defined and manufactured with density variation gradients by tracing rectilinear clay deposition toolpaths that induce porosity intended for fluid filtering and to maximize sun exposure. The design method for photocatalytic, particle filtration and evaporative cooling local characterization introduced by complex patterning elements in architectural envelope slat components processed with radiation analysis influenced design are validated by simulation and experimental testing on specimens manufactured by paste extrusion.
keywords	Ceramic 3D Printing; Paste Extrusion; Photocatalytic Filter; Performative Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia20_108p
id	acadia20_108p
authors	Akbarzadeh, Masoud; Ghomi, Ali Tabatabaie; Bolhassani, Mohammad; Akbari, Mostafa; Seyedahmadian, Alireza; Papalexiou, Konstantinos
year	2020
title	Saltatur
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 108-113.
summary	The Saltatur (Dancer in Latin) demonstrates innovative research in the design and fabrication of a prefab structure consisting of spatial concrete nodes assembled in a compression-only configuration. The compression-only body is kept in equilibrium using the post-tensioning steel rods at the top and the bottom of the structure, supporting an ultra-thin glass structure on its top. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allows locking each member in its exact location in the body, obviating the need for a particular assembly sequence. A bespoke steel connection transfers the tensile forces between the concrete members effectively. Achieving a high level of efficiency in utilizing concrete for spatial systems requires a robust and powerful structural design and fabrication approach that has been meticulously exhibited in this project. The structural form of the project was developed using a three-dimensional geometry-based structural design method known as 3D Graphic Statics with precise control over the magnitude of the lateral forces in the system. The entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports. This particular internal distribution of forces in the form of the compression-only body reduces the bending moment in the system and, therefore, the required mass to span such a distance.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	acadia20_208p
id	acadia20_208p
authors	Bernier-Lavigne, Samuel
year	2020
title	Object-Field
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 208-213
summary	This project aims to continue the correlative study between two fundamental entities of digital architecture: the object and the field. Following periods of experimentations on the ""field"" (materialization of flows of data through animation), the ""field of objects"" (parametricism), the ""object"" (OOO), we investigate the last possible interaction remaining: the ""object-field,"" by merging the formal characteristics of the object with the structural flow of its internal field. This investigation is achieved by exploring the high-resolution features of 3d printing in the design of autonomous architectural objects expressing materiality through topological optimization. The objects are generated by an iterative process of volumetric reduction, resulting in an ensemble of monoliths. Four of them are selected and analyzed through topological optimization in order to extract their internal fields. Next, a series of high-resolution algorithmic systems translate the structural information into 3d printed materiality. Of the four object-fields, one materializes, close to identical, the result of the optimization, giving the keystone to understanding the others. The second one expresses the structural flow through a 1mm voxel system, informed by the optimization, having the effect of stiffening the structure where it is needed and thus generating a new topography on the object. The last two explore the blur that this high-resolution can paradoxically create, with complete integration of the optimal structure in a transparent monolith. This is achieved by a vertex displacement algorithm, and the dissolution of the formal data of the monolith and the structural flows, through the mereological assembly of simple linear elements. For each object-field, a series of drawings was developed using specific algorithmic procedures derived from the peculiarities of their complex geometry. The drawings aim to catalyze coherence throughout the project, where similarities, hitherto kept apart by the multiple materialities, begin to dialogue.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

For more results click below: