Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 569

Reformat results as: short short into frame detailed detailed into frame

_id	acadia20_516
id	acadia20_516
authors	Aghaei Meibodi, Mania; Voltl, Christopher; Craney, Ryan
year	2020
title	Additive Thermoplastic Formwork for Freeform Concrete Columns
doi	https://doi.org/10.52842/conf.acadia.2020.1.516
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 516-525.
summary	The degree of geometric complexity a concrete element can assume is directly linked to our ability to fabricate its formwork. Additive manufacturing allows fabrication of freeform formwork and expands the design possibilities for concrete elements. In particular, fused deposition modeling (FDM) 3D printing of thermoplastic is a useful method of formwork fabrication due to the lightweight properties of the resulting formwork and the accessibility of FDM 3D printing technology. The research in this area is in early stages of development, including several existing efforts examining the 3D printing of a single material for formwork— including two medium-scale projects using PLA and PVA. However, the performance of 3D printed formwork and its geometric complexity varies, depending on the material used for 3D printing the formwork. To expand the existing research, this paper reviews the opportunities and challenges of using 3D printed thermoplastic formwork for fabricating custom concrete elements using multiple thermoplastic materials. This research cross-references and investigates PLA, PVA, PETG, and the combination of PLA-PVA as formwork material, through the design and fabrication of nonstandard structural concrete columns. The formwork was produced using robotic pellet extrusion and filament-based 3D printing. A series of case studies showcase the increased geometric freedom achievable in formwork when 3D printing with multiple materials. They investigate the potential variations in fabrication methods and their print characteristics when using different 3D printing technologies and printing materials. Additionally, the research compares speed, cost, geometric freedom, and surface resolution.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia20_236p
id	acadia20_236p
authors	Anton, Ana; Jipa, Andrei; Reiter, Lex; Dillenburger, Benjamin
year	2020
title	Fast Complexity
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 236-241
summary	The concrete industry is responsible for 8% of the global CO2 emissions. Therefore, using concrete in more complex and optimized shapes can have a significant benefit to the environment. Digital fabrication with concrete aims to overcome the geometric limitations of standardized formworks and thereby reduce the ecological footprint of the building industry. One of the most significant material economy potentials is in structural slabs because they represent 85% of the weight of multi-story concrete structures. To address this opportunity, Fast Complexity proposes an automated fabrication process for highly optimized slabs with ornamented soffits. The method combines reusable 3D-printed formwork (3DPF) and 3D concrete printing (3DCP). 3DPF uses binder-jetting, a process with submillimetre resolution. A polyester coating is applied to ensure reusability and smooth concrete surfaces otherwise not achievable with 3DCP alone. 3DPF is selectively used only where high-quality finishing is necessary, while all other surfaces are fabricated formwork-free with 3DCP. The 3DCP process was developed interdisciplinary at ETH Zürich and employs a two-component material system consisting of Portland cement mortar and calcium aluminate cement accelerator paste. This fabrication process provides a seamless transition from digital casting to 3DCP in a continuous automated process. Fast Complexity selectively uses two complementary additive manufacturing methods, optimizing the fabrication speed. In this regard, the prototype exhibits two different surface qualities, reflecting the specific resolutions of the two digital processes. 3DCP inherits the fine resolution of the 3DPF strictly for the smooth, visible surfaces of the soffit, for which aesthetics are essential. In contrast, the hidden parts of the slab use the coarse resolution specific to the 3DCP process, not requiring any formwork and implicitly achieving faster fabrication. In the context of an increased interest in construction additive manufacturing, Fast Complexity explicitly addresses the low resolution, lack of geometric freedom, and limited reinforcement options typical to layered extrusion 3DCP, as well as the limited customizability in concrete technology.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	acadia20_202p
id	acadia20_202p
authors	Battaglia, Christopher A.; Verian, Kho; Miller, Martin F.
year	2020
title	DE:Stress Pavilion
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 202-207
summary	Print-Cast Concrete investigates concrete 3D printing utilizing robotically fabricated recyclable green sand molds for the fabrication of thin shell architecture. The presented process expedites the production of doubly curved concrete geometries by replacing traditional formwork casting or horizontal corbeling with spatial concrete arching by developing a three-dimensional extrusion path for deposition. Creating robust non-zero Gaussian curvature in concrete, this method increases fabrication speed for mass customized elements eliminating two-part mold casting by combining robotic 3D printing and extrusion casting. Through the casting component of this method, concrete 3D prints have greater resolution along the edge condition resulting in tighter assembly tolerances between multiple aggregated components. Print-Cast Concrete was developed to produce a full-scale architectural installation commissioned for Exhibit Columbus 2019. The concrete 3D printed compression shell spanned 12 meters in length, 5 meters in width, and 3 meters in height and consisted of 110 bespoke panels ranging in weight of 45 kg to 160 kg per panel. Geometrical constraints were determined by the bounding box of compressed sand mold blanks and tooling parameters of both CNC milling and concrete extrusion. Using this construction method, the project was able to be assembled and disassembled within the timeframe of the temporary outdoor exhibit, produce <1% of waste mortar material in fabrication, and utilize 60% less material to construct than cast-in-place construction. Using the sand mold to contain geometric edge conditions, the Print-Cast technique allows for precise aggregation tolerances. To increase the pavilions resistance to shear forces, interlocking nesting geometries are integrated into each edge condition of the panels with .785 radians of the undercut. Over extruding strategically during the printing process casts the undulating surface with accuracy. When nested together, the edge condition informs both the construction logic of the panel’s placement and orientation for the concrete panelized shell.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	cdrf2019_255
id	cdrf2019_255
authors	Qian Wan, Li Wang, and Guowei Ma
year	2020
title	Adaptable Tool-Path Planning Method for 3D Concrete Printing Based on the Mapping Method
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_24
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
summary	3D concrete printing (3DCP) has been successfully and widely applied in the fields of civil structure, infrastructure, architectural decoration etc.,due to its unique advantages of automation and flexibility, and has shown great potential for development. One of the key steps in the execution of 3DCP is the toolpath planning process. However, 3DCP typically utilize the flowable composite materials which changes with time, and it is easy to induce interface joints or filling defects due to uneven path distribution when constructing the irregularshaped construction. To solve the problem of printing path planning in 3DCP, this paper proposes tool-path planning based on mapping method, which integrates the rheology and necessary continuity of concrete materials into the printing process parameters, improves the mutual adaptability of printing process and material characteristics, improves the continuity of printing, the compactness of filling, and then ensures the stability and durability of printing structure.
series	cdrf
email
last changed	2022/09/29 07:51

_id	sigradi2020_188
id	sigradi2020_188
authors	Matos, Elisa Bomtempo; Martinez, Andressa Carmo Pena
year	2020
title	Gridshell structural evaluation criteria based on Upward and Downward Modeling Methods in Karamba3D
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 188-195
summary	Despite the vast number of researches that address Gridshells as regular meshes, there is a lack of studies discussing hybrid meshes. In this context, this paper presents a parametric approach and employs visual algorithms for designing digital gridshells with different mesh patterns. We intend to formulate a methodology for Karamba 3D applications that address the structural performance according to variations in geometric composition, number of props, and construction methods. The work seeks to examine patterns that improve structural performance, through a parallel discussion between Upward and Downward modeling methods. Although the Upward modeling method is the most recurrent in studies on the topic, in this study, the Downward method generated structures with better structural performance.
keywords	Gridshell, Pattern, Geometric Modeling, Structural Design, Structural Optimization
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	sigradi2020_418
id	sigradi2020_418
authors	Neto, Olavo Avalone; Avalone, Marianne Costa
year	2020
title	CAPTURING THE ENVIRONMENT: using photogrammetry to register the built environment for simulation
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 418-424
summary	This study tested two forms of data gathering, three different methods of data registration, and two of modeling for the creation of 3D models of heritage landmarks. The applications on elements of three different scales were tested, a Cathedral, a Monument, and an Art Panel. The open-source Meshroom resulted in the best model in measures of mesh detail, reconstruction capability, and mesh refinement, regardless of the data acquisition method. Results may aid researchers and designers in choosing a workflow that suits their needs developing the best model possible, according to the tools they have at their disposal.
keywords	Photogrammetry, Mesh modeling, Reality capture, Cultural heritage, 3D models
series	SIGraDi
email
last changed	2021/07/16 11:49

_id	acadia20_220p
id	acadia20_220p
authors	Rieger, Uwe; Liu, Yinan
year	2020
title	LightWing II
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 220-225
summary	LightWing II is an immersive XR installation that explores hybrid design strategies equally addressing physical and digital design parameters. The interactive project links a kinetic structure with dynamic digital information in the form of 3D projected imagery and spatial sound. A key component of the project was the development of a new rendering principle that allows the accurate projection of stereoscopic images on a moving target screen. Using simple red/cyan cardboard glasses, the system expands the applications of contemporary AR headsets beyond an isolated viewing towards a communal multi-viewer event. LightWing`s construction consists of thin flexible carbon fibre rods used to tension an almost invisible mesh screen. The structure is asymmetrically balanced on a single pin joint and monitored by an IMU. A light touch sets the delicate wing-like object into a rotational oscillation. As a ‘hands-on’ experience, LightWing II creates a mysterious sensation of tactile data and enables the user to navigate through holographic narratives assembled in four scenes, including the interaction with swarms of three winged creatures, being immersed in a silky bubble, and a journey through a velvet wormhole. The user interface is dissolved through the direct linkage between the physical construction and the dynamic digital content. The project was developed at the arc/sec Lab at the University of Auckland. The Lab explores user responsive constructions where dynamic properties of the virtual world influence the material world and vice versa. The Lab’s vision is to re-connect the intangible computer world to the multisensory qualities of architecture and urban spaces. With a focus on intuitive forms of user interaction, the arc/sec Lab uses large-scale prototypes and installations as the driving method for both the development and the demonstration of new cyber-physical design principles.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	caadria2020_099
id	caadria2020_099
authors	Tu, Chun Man and Hou, June Hao
year	2020
title	After Abstraction, Before Figuration - Exploring the Potential Development of Form Re-topology and Evolution Reapplication with Three-dimensional Point Cloud Model Generation Logic.
doi	https://doi.org/10.52842/conf.caadria.2020.2.517
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 517-526
summary	In the era of three-dimensional (3D) informatics, the 3D point cloud modeling algorithm has the potential to further develop. In this study, we attempt to eliminate the limitations of the traditional reverse modeling method and directly turn point cloud data into the material for innovative architectural design by integrating 3D point cloud modeling into the CAD/CAM platform(Rhino/Grasshopper) most widely used by parametric designers. In this way, the randomly ordered point cloud model can be regenerated and reordered according to the designer's requirements. In addition, point cloud data can be spatially segmented and morphologically evolved according to the designer's preferences to construct a 3D model with higher efficiency and more dynamic real-time adjustment compared with the triangular mesh model. Moreover, when a computer vision technique is integrated into the point cloud design process, the point cloud model can be further used to more efficiently achieve rapid visualization, artisticization, and form adjustment. Therefore, point cloud modeling can not only be applied to the spatial structure presentation of building information modeling(BIM) but also can provide further opportunities for creative architectural design.
keywords	Three-dimensional Point-cloud Model; Computer Vision; Point Set Registration; Topology Optimization; Regeneration
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	artificial_intellicence2019_295
id	artificial_intellicence2019_295
authors	Xiang Wang, Kam-Ming Mark Tam, Alexandre Beaudouin-Mackay,Benjamin Hoyle, Molly Mason, Zhe Guo, Weizhe Gao, Ce Li, Weiran Zhu,Zain Karsan, Gene Ting-Chun Kao, Liming Zhang, Hua Chai, Philip F. Yuan, and Philippe Block
year	2020
title	3d-Printed Bending-Active Formwork for Shell Structures
doi	https://doi.org/https://doi.org/10.1007/978-981-15-6568-7_18
source	Architectural Intelligence Selected Papers from the 1st International Conference on Computational Design and Robotic Fabrication (CDRF 2026)
summary	This paper presents a novel building technique for the formwork of thin shell structures with 3d-printed bending-active mesh sheets. To enhance the structural stiffness of the flexible plastic materials, bending-active form is applied to utilize the geometry stiffening effect through the large deformation of bending. As it is the main problem to determine the final geometry of the bent surface, design methods with consideration of the numerical simulation is researched and both simulations via dynamic relaxation and finite element method are presented. Several demonstrator pavilions and the building process are shown to test the feasibilities of the presented building techniques in the real shell project. It is expected that this method could be applied into more thin shell projects to realize an efficient building technology with less exhaust of materials.
series	Architectural Intelligence
email
last changed	2022/09/29 07:28

_id	ecaade2020_484
id	ecaade2020_484
authors	Aguilar, Pavel, Borunda, Luis and Pardal, Cristina
year	2020
title	Additive Manufacturing of Variable-Density Ceramics, Photocatalytic and Filtering Slats
doi	https://doi.org/10.52842/conf.ecaade.2020.1.097
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 97-106
summary	Additive Manufacturing (AM) offers the potential development of novel architectural applications of ceramic building components that can be engineered at the level of material to the extent of designing its performance and properties by density variations. This research presents a computational method and fabrication technique emulating complex material behavior via AM of intricate geometries and presents components with photocatalytic and climatic properties. It proposes an innovative application of AM of ceramic components in architecture to explore potential bioclimatic and antipollution performative use. Lattices are defined and manufactured with density variation gradients by tracing rectilinear clay deposition toolpaths that induce porosity intended for fluid filtering and to maximize sun exposure. The design method for photocatalytic, particle filtration and evaporative cooling local characterization introduced by complex patterning elements in architectural envelope slat components processed with radiation analysis influenced design are validated by simulation and experimental testing on specimens manufactured by paste extrusion.
keywords	Ceramic 3D Printing; Paste Extrusion; Photocatalytic Filter; Performative Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia20_108p
id	acadia20_108p
authors	Akbarzadeh, Masoud; Ghomi, Ali Tabatabaie; Bolhassani, Mohammad; Akbari, Mostafa; Seyedahmadian, Alireza; Papalexiou, Konstantinos
year	2020
title	Saltatur
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 108-113.
summary	The Saltatur (Dancer in Latin) demonstrates innovative research in the design and fabrication of a prefab structure consisting of spatial concrete nodes assembled in a compression-only configuration. The compression-only body is kept in equilibrium using the post-tensioning steel rods at the top and the bottom of the structure, supporting an ultra-thin glass structure on its top. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allows locking each member in its exact location in the body, obviating the need for a particular assembly sequence. A bespoke steel connection transfers the tensile forces between the concrete members effectively. Achieving a high level of efficiency in utilizing concrete for spatial systems requires a robust and powerful structural design and fabrication approach that has been meticulously exhibited in this project. The structural form of the project was developed using a three-dimensional geometry-based structural design method known as 3D Graphic Statics with precise control over the magnitude of the lateral forces in the system. The entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports. This particular internal distribution of forces in the form of the compression-only body reduces the bending moment in the system and, therefore, the required mass to span such a distance.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	caadria2020_160
id	caadria2020_160
authors	Bruce, Caitlin, Sweet, Kevin and Ok, Jeongbin
year	2020
title	Closing the Loop - Recycling Waste Plastic
doi	https://doi.org/10.52842/conf.caadria.2020.1.135
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 135-144
summary	Worldwide we produce billions of tonnes of waste per year, including a million tonnes of plastic waste. Currently, there are methods for recycling plastic, but these methods can be expensive and time-consuming, resulting in most of the plastic being thrown into the landfill. Because plastic does not fully degrade, it ends up in the ocean and other waterways, poisoning the water with toxins. The purpose of this research is to provide a solution to reducing plastic waste by creating an alternative method of recycling that utilises new technologies such as additive manufacturing, to create a building material that fits into the concept of the circular economy. The findings of this research explored the recycling of plastic by collecting plastic waste such as PLA (Polylactic Acid) from old 3D printed models and other sources. The plastic was recycled into filament for additive manufacturing (AM) and used to print a building component, establishing a foundational proof of concept for the use of recycled plastic as a potential building material.
keywords	Additive Manufacturing; 3D Printing; Recycling Plastic ; Recycled Filament ; Waste Plastic
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia20_594
id	acadia20_594
authors	Farahbakhsh, Mehdi; Kalantar, Negar; Rybkowski, Zofia
year	2020
title	Impact of Robotic 3D Printing Process Parameters on Bond Strength
doi	https://doi.org/10.52842/conf.acadia.2020.1.594
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 594-603.
summary	Additive manufacturing (AM), also known as 3D printing, offers advantages over traditional construction technologies, increasing material efficiency, fabrication precision, and speed. However, many AM projects in academia and industrial institutions do not comply with building codes. Consequently, they are not considered safe structures for public utilization and have languished as exhibition prototypes. While three discrete scales—micro, mezzo, and macro—are investigated for AM with paste in this paper, structural integrity has been tackled on the mezzo scale to investigate the impact of process parameters on the bond strength between layers in an AM process. Real-world material deposition in a robotic-assisted AM process is subject to environmental factors such as temperature, humidity, the load of upper layers, the pressure of the nozzle on printed layers, etc. Those factors add a secondary geometric characteristic to the printed objects that was missing in the initial digital model. This paper introduces a heuristic workflow for investigating the impacts of three selective process parameters on the bond strength between layers of paste in the robotic-assisted AM of large-scale structures. The workflow includes a method for adding the secondary geometrical characteristic to the initial 3D model by employing X-ray computerized tomography (CT) scanning, digital image processing, and 3D reconstruction. Ultimately, the proposed workflow offers a pattern library that can be used by an architect or artificial intelligence (AI) algorithms in automated AM processes to create robust architectural forms.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	cdrf2019_297
id	cdrf2019_297
authors	H. Mohamed, D. W. Bao, and R. Snooks
year	2020
title	Super Composite: Carbon Fibre Infused 3D Printed Tectonics
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_28
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
summary	This research posits an innovative process of embedding carbon fibre as the primary structure within large-scale polymer 3D printed intricate architectural forms. The design and technical implications of this research are explored and demonstrated through two proto-architectural projects, Cloud Affects and Unclear Cloud, developed by the RMIT Architecture Snooks Research Lab. These projects are designed through a tectonic approach that we describe as a super composite – an approach that creates a compression of tectonics through algorithmic selforganisation and advanced manufacturing. Framed within a critical view of the lineage of polymer 3D printing and high tech fibres in the field of architectural design, the research outlines the limitations of existing robotic processes employed in contemporary carbon fibre fabrication. In response, the paper proposes an approach we describe asInfused Fibre Reinforced Plastic (IFRP) as a novel fabrication method for intricate geometries. This method involves 3D printing of sacrificial formwork conduits within the skin of complex architectural forms that are infused with continuous carbon fibre structural elements. Through detailed observation and critical review of Cloud Affects and Unclear Cloud (Fig. 2), the paper assesses innovations and challenges of this research in areas including printing, detailing, structural analysis and FEA modelling. The paper notes how these techniques have been refined through the iterative design of the two projects, including the development of fibre distribution mapping to optimise the structural performance.
series	cdrf
email
last changed	2022/09/29 07:51

_id	caadria2020_434
id	caadria2020_434
authors	Lange, Christian, Ratoi, Lidia and Co, Dominic Lim
year	2020
title	Reformative Coral Habitats - Rethinking Artificial Reef structures through a robotic 3D clay printing method.
doi	https://doi.org/10.52842/conf.caadria.2020.2.463
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 463-472
summary	In 2018 after Typhoon Mangkhut hit Hong Kong, the city lost around 80% of its existing corals. As a consequence, a team consisting of marine biologists and architects have developed a series of performative structures that will be deployed in Hong Kong waters intending to aid new coral growth over the coming years. This paper describes the present research that focuses on the design and fabrication of artificial reef structures utilizing a robotic 3d clay printing method addressing the specificities of Hong Kong marine ecologies. The paper describes further the algorithmic design methodology, the optimization processes in the generation of the printing path, and the methodology for the fabrication processes during the production cycle to achieve even quality and prevent cracking during the drying process.
keywords	Digital Fabrication; 3D clay printing; Artificial Coral Reefs; Computational Design
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia20_164p
id	acadia20_164p
authors	Lange, Christian; Ratoi, Lidia; Co Lim, Dominic; Hu, Jason; Baker, David M.; Yu, Vriko; Thompson, Phil
year	2020
title	Reformative Coral Habitats
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 164-169
summary	Coral reefs are some of the most diverse ecologies in the marine world. They are the habitat to tens of thousands of different marine species. However, these wildlife environments are endangered across the globe. Recent research estimates that around 75 percent of the remaining coral reefs are currently under threat. In 2018 after a devastating storm, Hong Kong lost around 80% of its existing corals. Consequently, a team consisting of marine biologists and architects at The University of Hong Kong has developed a series of performative structures that have been deployed in the city's waters in July 2020, intending to aid new coral growth over the coming years. The project was commissioned by the Agriculture, Fisheries, and Conservation Department (AFCD) and is part of an ongoing active management measure for coral restoration in Hoi Ha Wan Marine Park in Hong Kong. The following objectives were defined as part of the design and fabrication research of the project. To develop a design strategy that builds on the concept of biomimicry to allow for complex spaces to occur that would provide attributes against the detachment of the inserted coral fragment, hence could enhance a diverse marine life specific to the context of the cities water conditions. To generate an efficient printing path that accommodates the specific morphological design criteria and ensures structural integrity and the functional aspects of the design. To develop an efficient fabrication process with a DIW 3D printing methodology that considers warping, shrinkage, and cracking in the clay material. The research team developed a method that combined an algorithmic design approach for the design of different geometries with a digital additive manufacturing process utilizing robotic 3D clay printing. The overall fabrication strategy for the complex and large pieces sought to ensure structural longevity, optimize production time, and tackle the involved double-sided printing method. Overall, 128 tiles were printed, covering roughly 40sqm of the seabed.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	acadia20_372
id	acadia20_372
authors	Nelson, Cameron; Sabin, Jenny
year	2020
title	Shape-Programmed Self-Assembly of Bead Structures
doi	https://doi.org/10.52842/conf.acadia.2020.1.372
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 372-381.
summary	This paper demonstrates the potential of a robust, low-cost approach to programmable matter using beads and string to achieve complex shapes with novel self-organizing and deformational properties. The method is inspired by the observation that beads forced together along a string will become constrained until they spontaneously rigidify. This behavior is easily observed using any household string and flat-faced beads and recalls the mechanism behind classic crafts such as push puppets. However, specific examples of architectural applications are lacking. We analyze how this phenomenon occurs through static force analyses, physical tests, and simulation, using a rigid body physics engine to validate digital prototypes. We develop a method of designing custom bead geometries able to be produced via generic 3D-printing technology, as well as a computational path-planning toolkit for designing ways of threading beads together. We demonstrate how these custom bead geometries and threading paths influence the acquired structure and its assembly. Finally, we propose a means of scaling up this phenomenon, suggesting potential applications in deployable architecture, mortarless assembly of nonfunicular masonry, and responsive architectural systems.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2020_363
id	caadria2020_363
authors	Pal, Abhipsa, Chan, Wi Leen, Tan, Ying Yi, Chia, Pei Zhi and Tracy, Kenneth Joseph
year	2020
title	Knit Concrete Formwork
doi	https://doi.org/10.52842/conf.caadria.2020.1.213
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 213-222
summary	The manufacture of concrete funicular shells often relies on traditional formwork construction techniques to provide a sculptured cavity for the fluid material to occupy (Bechthold, 2004). While this enables a predictable geometric outcome, the extensive use of timber and/or steel to construct these formworks account for up to 60% of the total production cost of concrete and are discarded after the casting is complete (Lloret et al. 2014). Thus, we propose an alternative method to create prefabricated modular systems out of concrete casted in customised tubular knitted membranes. These perform as a network of struts that can be affixed onto 3D printed nodes of a singular design. Altogether, these components serve as a kit-of-parts that can be transported to site and assembled together to create shell geometries.
keywords	Knitted Textile; Fabric Formwork; Concrete Casting
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	sigradi2020_371
id	sigradi2020_371
authors	Scheeren, Rodrigo; Sperling, David M.
year	2020
title	Flexible multi-scalar system: 3D printing of modular components for adaptable tensioned structures
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 371-376
summary	In face of the improvement of additive manufacturing techniques for architecture and construction, the paper presents a design experiment that aims to demonstrate the feasibility of using an accessible technology such as a 3D desktop printer for the creation of low-cost artifacts. Based on the "research by design" method and "multi-scalar modeling" approach, it shows the creation of a digitally manufactured architectural component that can integrate as a final product a lightweight and flexible construction system. The result can be geometrically adapted and applied to canopies or facades, achieving an interface between high and low technologies.
keywords	Digital fabrication, 3D printing, Architectural design, Multi-scalar system, High-Low tech
series	SIGraDi
email
last changed	2021/07/16 11:49

_id	acadia20_48
id	acadia20_48
authors	Schofield, Alex
year	2020
title	Coral Carbonate
doi	https://doi.org/10.52842/conf.acadia.2020.1.048
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 48-57.
summary	This work-in-progress paper describes a body of research that utilizes the invention and application of a novel method to 3D-print calcium carbonate (CaCO3). The resultant 3D-printed objects can be computationally optimized and used as a scaffold for the growth of various aquatic life that exists at the interface of soft edges and the built, specifically (but not limited to) coral polyps. Rather than utilizing materials designed for anthropocentric terrestrial environments, we can harness materials and forms native to aquatic ecosystems in combination with advanced computation and fabrication techniques to help foster applied research in service to healthier ecosystems and cohabitation. This paper introduces the novel application of a 3D-printed calcium carbonate, mimicking a similar material composition to that of coral, and describes the additive manufactured medium with regard to 3D powder-printing methodologies. Hypothesis and proposal of morphogenesis in surface and volume are identified as key factors for interface with aquatic organisms. Current and future applications are additionally exhibited through a combination of material composition, surface, and form as targeted intervention and artificial restoration for aquatic ecosystems. While our planet requires anthropocentric mitigation strategies for reduction of greenhouse gases that contribute to aquatic life’s greatest threats, we must simultaneously develop strategies for adaptation that immediately respond to the current realities of a changing climate.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

For more results click below: