Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 653

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2022_16
id	ecaade2022_16
authors	Bailey, Grayson, Kammler, Olaf, Weiser, Rene, Fuchkina, Ekaterina and Schneider, Sven
year	2022
title	Performing Immersive Virtual Environment User Studies with VREVAL
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 437–446
doi	https://doi.org/10.52842/conf.ecaade.2022.2.437
summary	The new construction that is projected to take place between 2020 and 2040 plays a critical role in embodied carbon emissions. The change in material selection is inversely proportional to the budget as the project progresses. Given the fact that early-stage design processes often do not include environmental performance metrics, there is an opportunity to investigate a toolset that enables early-stage design processes to integrate this type of analysis into the preferred workflow of concept designers. The value here is that early-stage environmental feedback can inform the crucial decisions that are made in the beginning, giving a greater chance for a building with better environmental performance in terms of its life cycle. This paper presents the development of a tool called LearnCarbon, as a plugin of Rhino3d, used to educate architects and engineers in the early stages about the environmental impact of their design. It facilitates two neural networks trained with the Embodied Carbon Benchmark Study by Carbon Leadership Forum, which learns the relationship between building geometry, typology, and construction type with the Global Warming potential (GWP) in tons of C02 equivalent (tCO2e). The first one, a regression model, can predict the GWP based on the massing model of a building, along with information about typology and location. The second one, a classification model, predicts the construction type given a massing model and target GWP. LearnCarbon can help improve the building life cycle impact significantly through early predictions of the structure’s material and can be used as a tool for facilitating sustainable discussions between the architect and the client.
keywords	Pre-Occupancy Evaluation, Immersive Virtual Environment, Wayfinding, User Centered Design, Architectural Study Design
series	eCAADe
email
last changed	2024/04/22 07:10

_id	sigradi2022_246
id	sigradi2022_246
authors	Bustos Lopez, Gabriela; Aguirre, Erwin
year	2022
title	Walking the Line: UX-XR Design Experiment for Ephemeral Installations in Pandemic Times
source	Herrera, PC, Dreifuss-Serrano, C, Gómez, P, Arris-Calderon, LF, Critical Appropriations - Proceedings of the XXVI Conference of the Iberoamerican Society of Digital Graphics (SIGraDi 2022), Universidad Peruana de Ciencias Aplicadas, Lima, 7-11 November 2022 , pp. 699–710
summary	Throughout COVID 19 Pandemic since 2020, it was necessary to generate instructional strategies including digital platforms for creative processes in architecture. This article exposes an experience that integrates pedagogical, operational, and technical dimensions in architecture virtual teaching. A pedagogical methodology was designed and implemented, fusing User Experience (UX) and Extended Reality (XR) during the architectural design process in a virtual experimental studio. The use of UX-XR as a designing-reviewing strategy in architecture, positively impacted the creative experience of both students and reviewers by enriching the perception of the space and interactively simulating the user experience. A friendly, fun, and socially inclusive environment was generated for learning architecture using synthetic media and Multiuser Virtual Environments (MUVEs). The successful results of the students’ projects by phase are shown, revealing the significance of combining UX and XR, incorporating the metaverse as a canvas to review, recreate, interact, and assess architectural designs.
keywords	User Experience (UX), Extended Reality (XR), Multiuser Virtual Environments (MUVE), Virtual Campus, Usability
series	SIGraDi
email
last changed	2023/05/16 16:56

_id	ijac202018403
id	ijac202018403
authors	Dagmar Reinhardt, Matthias Hank Haeusler, Kerry London, Lian Loke, Yingbin Feng, Eduardo De Oliveira Barata, Charlotte Firth, Kate Dunn, Nariddh Khean, Alessandra Fabbri, Dylan Wozniak-O’Connor and Rin Masuda
year	2020
title	CoBuilt 4.0: Investigating the potential of collaborative robotics for subject matter experts
source	International Journal of Architectural Computing vol. 18 - no. 4, 353–370
summary	Human-robot interactions can offer alternatives and new pathways for construction industries, industrial growth and skilled labour, particularly in a context of industry 4.0. This research investigates the potential of collaborative robots (CoBots) for the construction industry and subject matter experts; by surveying industry requirements and assessments of CoBot acceptance; by investing processes and sequences of work protocols for standard architecture robots; and by exploring motion capture and tracking systems for a collaborative framework between human and robot co-workers. The research investigates CoBots as a labour and collaborative resource for construction processes that require precision, adaptability and variability.Thus, this paper reports on a joint industry, government and academic research investigation in an Australian construction context. In section 1, we introduce background data to architecture robotics in the context of construction industries and reports on three sections. Section 2 reports on current industry applications and survey results from industry and trade feedback for the adoption of robots specifically to task complexity, perceived safety, and risk awareness. Section 3, as a result of research conducted in Section 2, introduces a pilot study for carpentry task sequences with capture of computable actions. Section 4 provides a discussion of results and preliminary findings. Section 5 concludes with an outlook on how the capture of computable actions provide the foundation to future research for capturing motion and machine learning.
keywords	Industry 4.0, collaborative robotics, on-site robotic fabrication, industry research, machine learning
series	journal
email
last changed	2021/06/03 23:29

_id	caadria2020_032
id	caadria2020_032
authors	Gu, Zhuoxing and Yang, Chunxia
year	2020
title	Generation of Public Space Structure Based on Digital Multi-agent System - Taking the interaction between self-consensus "Stigmergy" particles and the old city area as an example
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 285-294
doi	https://doi.org/10.52842/conf.caadria.2020.1.285
summary	In the study, the ant colony behavior was simulated to establish a parametric multi-agent system with independent consensus "Stigmergy" for interaction with the site. In the experiment, the initial points of the particles correspond to the key historical buildings, and the target points correspond to the important public space nodes. Edit and adjust the motion characteristics, search features, generation and disappearance characteristics of the simulated particles to obtain the main consensus particle swarm distribution and the distributed consensus particle swarm distribution. This form has a compliant or conflicting relationship with the existing urban environment. Using the contours of the self-consensus spatial form, the particle swarm density, and the pointing relationship between the particles and the building can provide a basis for the transformation and renewal of the existing urban environment, thus forming a spatial transformation strategy that more closely matches the user behavior in the space.
keywords	Multi-agent system; Particle property construction; Stigmergy; Self-consensus particles; Public space structure
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2020_197
id	ecaade2020_197
authors	Haghighi, MohammadYousef and Mahdavinejad, Mohammadjavad
year	2020
title	HelioPhilia Intelligent Kinetic Canopy
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 243-250
doi	https://doi.org/10.52842/conf.ecaade.2020.2.243
summary	In the contemporary changing world, digital architecture is to bring us new horizons and opportunities to take a determining step toward future. It results in speed and precision in process of design and construction. Moreover, the world is shifting to smartness. This paper is to develop a comprehensive mechanism to design an innovative canopy inspired from nature. Therefore, the canopy is going to inspire from young sunflowers. The canopy consists of a multi-functional waffle-frame. The main wing of the platform structure can have alternative utilization and the amount of light passing through it can be adjusted by using shade on the waffle spaces. Solar panels can also be used on the frames conductive to supply the energy independently. This HelioPhilia canopy always seeking the daylight, therefore, it cast a shadow behind itself to provide much more comfortable environment for whom choose there to be inside as a user. The results emphasize on the role of learning from nature in successful digital design process.
keywords	HelioPhilia Architecture; Intelligent Architecture; Kinetic Spaces; Digital Fabrication; High-Performance Architecture; Interactive Design
series	eCAADe
email
last changed	2022/06/07 07:51

_id	caadria2020_078
id	caadria2020_078
authors	Joyce, Gabriella and Pelosi, Antony
year	2020
title	Robotic Connections for CLT Panels
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 403-412
doi	https://doi.org/10.52842/conf.caadria.2020.2.403
summary	In a climate where standard methods of construction are being challenged, developments in engineered timbers are allowing mass timber construction to be explored as a sustainable alternative to current building methods that can change the future of the built environment. Cross-laminated timber (CLT) is at the forefront of this evolution and, with the advancement in computational design and digital fabrication tools, there lies an opportunity to redefine standard construction. This project creates connections inspired by traditional Japanese joinery that have been adapted to be used for the panel construction of CLT structures. Using a combination of digital modelling and advanced digital fabrication, the project utilizes CLT offcuts as a primary connection material. The system not only reduces waste but also mitigates thermal bridging and lowers the number of connection points whilst increasing the ease of building and fabrication. Connection systems are designed and prototyped using a robotic arm and are then evaluated within the context of a building scale and considers largeâ€scale fabrication and onâ€site assembly whilst continuing to focus on the reduction of waste.
keywords	Robotics; CLT; Connections; Waste; Timber
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2020_260
id	caadria2020_260
authors	LI, Yan, DU, Hongwu and WANG, Qing
year	2020
title	The Association Study Between Residential Building Interface and Perceived Density based on VR Technology - Taking 2 Enclosed Residential Districts of Guangzhou as Examples
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 711-720
doi	https://doi.org/10.52842/conf.caadria.2020.1.711
summary	As urban development enters the stock increment era , the demand of environmental quality in urban residential districts gradually improves, making the construction of livable residential environment an important direction of urban development. The improvement of livable environment is the inevitable result of this process and perceived density is an indispensable and important part. Among the statistical methods, preference study is the most commonly one to explore the subjective factors affecting preference. The experience of immersive virtual environment can provide a more appropriate analytical method better for traditional image selection. Different permeability of architectural interface has significant influences on the perception of space comfortability, crowding and fascination. In this paper, two existing enclosed residential districts are selected for case study. The factors closely related to perceived density, such as solid Wall, grille, glass, open space, greening, etc, are selected by using immersive virtual technology. Through the interviewees' evaluations of perceived density of the virtual environment, the relationship between building interface and the perceived density of the residential area will be established.
keywords	Spatial Perceived Density; Virtual Reality Technology; Enclosed Residential District; Housing Interface; Association Study
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2020_053
id	ecaade2020_053
authors	Ren, Yue, Chu, Jie and Zheng, Hao
year	2020
title	Dynamic Symbiont - An Interactive Urban Design Method Combining Swarm Intelligence and Human Decisions
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 383-392
doi	https://doi.org/10.52842/conf.ecaade.2020.1.383
summary	Can a virtual city game be built by both the public and computer-based on real-site data? In the current process of deepening global connectivity, requirements for an effective urban design are no longer limited to functions or aesthetics, but a smart, dynamic complex with multi-interactions of data, group behaviours, and physical space. This paper introduces the logic of swarm intelligence and particle system for proposing a new urban design methodology. The platforms range from simulations that quantify the impact of the disruptive interventions of city activities to communicable collaboration between different users in a UI system, which creates virtual connections between optimized urbanscape and users. In the design system, based on the context data, the computer firstly simulates and optimizes the existing 2D activity joints between the people and analyzed the current spatial connection nodes into certain design rules. Through optimal programming for spatial connection and data iterations, the activity connection structures in the second simulation are abstracted into a set of interactive 3D topographic. The final data-visualization results are presented as a co-building megacity in a virtual construction game. Users can choose the virtual building unit types and intuitively influence the future urbanscape decision through virtual construction.
keywords	Swarm Intelligence; Particle System; Digital Simulation; Human-Machine Interaction; Data Visualization
series	eCAADe
email
last changed	2022/06/07 07:56

_id	cdrf2019_103
id	cdrf2019_103
authors	Runjia Tian
year	2020
title	Suggestive Site Planning with Conditional GAN and Urban GIS Data
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_10
summary	In architecture, landscape architecture, and urban design, site planning refers to the organizational process of site layout. A fundamental step for site planning is the design of building layout across the site. This process is hard to automate due to its multi-modal nature: it takes multiple constraints such as street block shape, orientation, program, density, and plantation. The paper proposes a prototypical and extensive framework to generate building footprints as masterplan references for architects, landscape architects, and urban designers by learning from the existing built environment with Artificial Neural Networks. Pix2PixHD Conditional Generative Adversarial Neural Network is used to learn the mapping from a site boundary geometry represented with a pixelized image to that of an image containing building footprint color-coded to various programs. A dataset containing necessary information is collected from open source GIS (Geographic Information System) portals from the city of Boston, wrangled with geospatial analysis libraries in python, trained with the TensorFlow framework. The result is visualized in Rhinoceros and Grasshopper, for generating site plans interactively.
series	cdrf
email
last changed	2022/09/29 07:51

_id	ascaad2022_102
id	ascaad2022_102
authors	Turki, Laila; Ben Saci, Abdelkader
year	2022
title	Generative Design for a Sustainable Urban Morphology
source	Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 434-449
summary	The present work concerns the applications of generative design for sustainable urban fabric. This represents an iterative process that involves an algorithm for the generation of solar envelopes to satisfy solar and density constraints. We propose in this paper to explore a meta-universe of human-machine interaction. It aims to design urban forms that offer solar access. This being to minimize heating energy expenditure and provide solar well-being. We propose to study the impact of the solar strategy of building morphosis on energy exposure. It consists of determining the layout and shape of the constructions based on the shading cut-off time. This is a period of desirable solar access. We propose to define it as a balance between the solar irradiation received in winter and that received in summer. We rely on the concept of the solar envelope defined since the 1970s by Knowles and its many derivatives (Koubaa Turki & al., 2020). We propose a parametric model to generate solar envelopes at the scale of an urban block. The generative design makes it possible to create a digital model of the different density solutions by varying the solar access duration. The virtual environment created allows exploring urban morphologies resilient both to urban densification and better use of the context’s resources. The seasonal energy balance, between overexposure in summer and access to the sun in winter, allows reaching high energy and environmental efficiency of the buildings. We have developed an algorithm on Dynamo for the generation of the solar envelope by shading exchange. The program makes it possible to detect the boundaries of the parcels imported from Revit, establish the layout of the building, and generate the solar envelopes for each variation of the shading cut-off time. It also calculates the FAR1 and the FSI2 from the variation of the shading cut-off time for each parcel of the island. We compare the solutions generated according to the urban density coefficients and the solar access duration. Once the optimal solution has been determined, we export the results back into Revit environment to complete the BIM modelling for solar study. This article proposes a method for designing buildings and neighbourhoods in a virtual environment. The latter acts upstream of the design process and can be extended to the different phases of the building life cycle: detailed design, construction, and use.
series	ASCAAD
email
last changed	2024/02/16 13:38

_id	caadria2020_161
id	caadria2020_161
authors	Kido, Daiki, Fukuda, Tomohiro and Yabuki, Nobuyoshi
year	2020
title	Mobile Mixed Reality for Environmental Design Using Real-Time Semantic Segmentation and Video Communication - Dynamic Occlusion Handling and Green View Index Estimation
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 681-690
doi	https://doi.org/10.52842/conf.caadria.2020.1.681
summary	Mixed reality (MR), that blends the real and virtual worlds, attracted attention for consensus-building among stakeholders in environmental design with the visualization of planned landscape onsite. One of the technical challenges in MR is the occlusion problem which occurs when virtual objects hide physical objects that should be rendered in front of virtual objects. This problem may cause inappropriate simulation. And the visual environmental assessment of present and proposed landscape with MR can be effective for the evidence-based design, such as urban greenery. Thus, this study aims to develop a MR-based environmental assessment system with dynamic occlusion handling and green view index estimation using semantic segmentation based on deep learning. This system was designed for the use on a mobile device with video communication over the Internet to implement a real-time semantic segmentation whose computational cost is high. The applicability of the developed system is shown through case studies.
keywords	Mixed Reality (MR); Environmental Design; Dynamic Occlusion Handling; Semantic Segmentation; Green View Index
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2020_390
id	ecaade2020_390
authors	Ahmadzadeh Bazzaz, Siamak, Fioravanti, Antonio and Coraglia, Ugo Maria
year	2020
title	Depth and Distance Perceptions within Virtual Reality Environments - A Comparison between HMDs and CAVEs in Architectural Design
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 375-382
doi	https://doi.org/10.52842/conf.ecaade.2020.1.375
summary	The Perceptions of Depth and Distance are considered as two of the most important factors in Virtual Reality Environments, as these environments inevitability impact the perception of the virtual content compared with the one of real world. Many studies on depth and distance perceptions in a virtual environment exist. Most of them were conducted using Head-Mounted Displays (HMDs) and less with large screen displays such as those of Cave Automatic Virtual Environments (CAVEs). In this paper, we make a comparison between the different aspects of perception in the architectural environment between CAVE systems and HMD. This paper clarifies the Virtual Object as an entity in a VE and also the pros and cons of using CAVEs and HMDs are explained. Eventually, just a first survey of the planned case study of the artificial port of the Trajan emperor near Fiumicino has been done as for COVID-19 an on-field experimentation could not have been performed.
keywords	Visual Perception; Depth and Distance Perception; Virtual Reality; HMD; CAVE; Trajan’s port
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cdrf2019_199
id	cdrf2019_199
authors	Ana Herruzo and Nikita Pashenkov
year	2020
title	Collection to Creation: Playfully Interpreting the Classics with Contemporary Tools
source	Proceedings of the 2020 DigitalFUTURES The 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020)
doi	https://doi.org/https://doi.org/10.1007/978-981-33-4400-6_19
summary	This paper details an experimental project developed in an academic and pedagogical environment, aiming to bring together visual arts and computer science coursework in the creation of an interactive installation for a live event at The J. Paul Getty Museum. The result incorporates interactive visuals based on the user’s movements and facial expressions, accompanied by synthetic texts generated using machine learning algorithms trained on the museum’s art collection. Special focus is paid to how advances in computing such as Deep Learning and Natural Language Processing can contribute to deeper engagement with users and add new layers of interactivity.
series	cdrf
email
last changed	2022/09/29 07:51

_id	ecaade2020_133
id	ecaade2020_133
authors	Andrade Zandavali, Barbara, Paul Anderson, Joshua and Patel, Chetan
year	2020
title	Embodied Learning through Fabrication Aware Design
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 145-154
doi	https://doi.org/10.52842/conf.ecaade.2020.2.145
summary	The contemporary culture of geometry-driven design stands as consequence of an institutionalised segregation between the fields of architecture, structure and construction. In turn, digital design methods that are both material and fabrication aware from the outset create space for uncertainty and the potential for embodied learning. Following this principle, this paper summarises the outcomes of a workshop developed to investigate the contribution of fabrication aware design methods in the production of a masonry block using both analogue and digital manufacturing. Students were to develop and investigate a design, through assembly techniques and configurations orientated around manual hot wire cutting, robotic tooling and three-dimensional printing. Outcomes were manufactured and compared regarding work precision, production time, material efficiency, cost and scalability. The analysis indicated that the most accurate results yielded from the robotic tooling system, and simultaneously exhibited the most efficient use of time, while the three-dimensional printer generated the least material waste, due to the nature of additive production. Fabrication aware design and comparative analysis enabled students to make more informed decisions while the use of rapid prototyping facilitated a relationship between digitalization and materiality allowing for a space in which uncertainty and reflection could be fostered. Reinforcing that fabrication aware design methods can unify the field and provide guidance to designers over multi-lateral aspects of a project.
keywords	Fabrication-Aware Design; Rapid Prototyping; Embodiment
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia20_236p
id	acadia20_236p
authors	Anton, Ana; Jipa, Andrei; Reiter, Lex; Dillenburger, Benjamin
year	2020
title	Fast Complexity
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 236-241
summary	The concrete industry is responsible for 8% of the global CO2 emissions. Therefore, using concrete in more complex and optimized shapes can have a significant benefit to the environment. Digital fabrication with concrete aims to overcome the geometric limitations of standardized formworks and thereby reduce the ecological footprint of the building industry. One of the most significant material economy potentials is in structural slabs because they represent 85% of the weight of multi-story concrete structures. To address this opportunity, Fast Complexity proposes an automated fabrication process for highly optimized slabs with ornamented soffits. The method combines reusable 3D-printed formwork (3DPF) and 3D concrete printing (3DCP). 3DPF uses binder-jetting, a process with submillimetre resolution. A polyester coating is applied to ensure reusability and smooth concrete surfaces otherwise not achievable with 3DCP alone. 3DPF is selectively used only where high-quality finishing is necessary, while all other surfaces are fabricated formwork-free with 3DCP. The 3DCP process was developed interdisciplinary at ETH Zürich and employs a two-component material system consisting of Portland cement mortar and calcium aluminate cement accelerator paste. This fabrication process provides a seamless transition from digital casting to 3DCP in a continuous automated process. Fast Complexity selectively uses two complementary additive manufacturing methods, optimizing the fabrication speed. In this regard, the prototype exhibits two different surface qualities, reflecting the specific resolutions of the two digital processes. 3DCP inherits the fine resolution of the 3DPF strictly for the smooth, visible surfaces of the soffit, for which aesthetics are essential. In contrast, the hidden parts of the slab use the coarse resolution specific to the 3DCP process, not requiring any formwork and implicitly achieving faster fabrication. In the context of an increased interest in construction additive manufacturing, Fast Complexity explicitly addresses the low resolution, lack of geometric freedom, and limited reinforcement options typical to layered extrusion 3DCP, as well as the limited customizability in concrete technology.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	ecaade2020_115
id	ecaade2020_115
authors	Azambuja Varela, Pedro and Sousa, José Pedro
year	2020
title	Liquid Stereotomy - the Tamandua Vault
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 361-370
doi	https://doi.org/10.52842/conf.ecaade.2020.2.361
summary	A renewed interest in stereotomy, narrowly entwined with digital technologies, has allowed for the recovery and proposal of new techniques and expressions in this building approach. A new classification scheme for stereotomy research allows for the framing of various aspects related to this discipline, including a newly developed fabrication system specially tailored for the wedge-shaped voussoirs. This fabrication system is based in a reusable mould which may assume an infinite number of geometries, avoiding the wasteful discarding of material found in subtractive strategies. The usage of a mould also allows for more sustainable materials to be employed, catering to current challenges. The strategies subject for demonstration in this project rely on various bottom-up approaches, which involve particle physic simulations such as a hanging model to compute an optimal stereo-funicular shape, or spring mechanisms to find optimal coplanar solutions. The proposed mechanisms work in a parametric algorithmically environment, able to handle dozens of uniquely different voussoirs at the same time. Together with the automatic translation to fabrication data, the proposed shape complexity would hardly be built with classic tools. The Tamandua Vault project has the purpose of exemplifying the possibilities of an updated stereotomy, while its design demonstrates current strategies that may be employed in the resolution of complex geometrical problems and bespoke fabrication of construction components for stereotomy.
keywords	stereotomy; digital design; digital fabrication; compression; sustainability
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2021_142
id	ascaad2021_142
authors	Bakir, Ramy; Sara Alsaadani, Sherif Abdelmohsen
year	2021
title	Student Experiences of Online Design Education Post COVID-19: A Mixed Methods Study
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 142-155
summary	This paper presents findings of a survey conducted to assess students’ experiences within the online instruction stage of their architectural education during the lockdown period caused by the COVID-19 pandemic between March and June 2020. The study was conducted in two departments of architecture in both Cairo branches of the Arab Academy for Science, Technology & Maritime Transport (AASTMT), Egypt, with special focus on courses involving a CAAD component. The objective of this exploratory study was to understand students’ learning experiences within the online period, and to investigate challenges facing architectural education. A mixed methods study was used, where a questionnaire-based survey was developed to gather qualitative and quantitative data based on the opinions of a sample of students from both departments. Findings focus on the qualitative component to describe students’ experiences, with quantitative data used for triangulation purposes. Results underline students’ positive learning experiences and challenges faced. Insights regarding digital tool preferences were also revealed. Findings are not only significant in understanding an important event that caused remote architectural education in Egypt but may also serve as an important stepping-stone towards the future of design education in light of newly-introduced disruptive online learning technologies made necessary in response to lockdowns worldwide
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	ecaade2020_542
id	ecaade2020_542
authors	Brown, Andre, Liu, Yisi, Webb, Nicholas and Knight, Mike
year	2020
title	Interpreting and exploiting narrative as a sketch design generator for application in VE
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 449-458
doi	https://doi.org/10.52842/conf.ecaade.2020.1.449
summary	The research in this paper focusses on how a narrative text can be the generator of an architectural drawing, or other architectural representation, such as an Architectural Virtual Environment. The drawn physical sketch has traditionally played that role. A particular approach to narrative has been important for some notable architects and their architecture. Ian Ritchie (2014), for instance, celebrates the use of poetry to describe the essential spirit of a scheme before any drawing is done. The work in the paper here describes the proposition to capture such narrative text in a systematic and structured way. We describe foundational work on how the captured narrative text has been translated into a contemporary, computer-mediated, design development environment. Different narrative accounts recalling a now demolished house form the focus case study. This case study is the vehicle through which the initial principles establishing how best to move from narrative to virtual representation are established and tested.
keywords	virtual environment; narrative; sketch; virtual reality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia20_638
id	acadia20_638
authors	Claypool, Mollie; Jimenez Garcia, Manuel; Retsin, Gilles; Jaschke, Clara; Saey, Kevin
year	2020
title	Discrete Automation
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 638-647.
doi	https://doi.org/10.52842/conf.acadia.2020.1.638
summary	Globally, the built environment is inequitable. And while construction automation is often heralded as the solution to labor shortages and the housing crisis, such methods tend to focus on technology, neglecting the wider socioeconomic contexts. Automated Architecture (AUAR), a spinoff of AUAR Labs at The Bartlett School of Architecture, UCL, asserts that a values-centered, decentralized approach to automation centered around local communities can begin to address this material hegemony. The paper introduces and discusses AUAR’s platform-based framework, Discrete Automation, which subverts the status quo of automation that excludes those who are already disadvantaged into an inclusive network capable of providing solutions to both the automation gap and the assembly problem. Through both the wider context of existing modular housing platforms and issues of the current use of automated technologies in architectural production, Discrete Automation is discussed through the example of Block Type A, a discrete timber building system, which in conjunction with its combinatorial app constitutes the base of a community-led housing platform developed by AUAR. Built case studies are introduced alongside a discussion of the applied methodologies and an outlook on the platform’s potential for scalability in an equitable, sustainable manner.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2020_314
id	ecaade2020_314
authors	Das, Avishek, Worre Foged, Isak and Jensen, Mads Brath
year	2020
title	Designing with a Robot - Interactive methods for brick wall design using computer vision
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 605-612
doi	https://doi.org/10.52842/conf.ecaade.2020.2.605
summary	The deterministic and linear nature of robotic processes in architectural construction often allows no or very little adjustments during the fabrication process. If any need for modification arise the process is usually interrupted, changes are accommodated, and the process is resumed or restarted. The rigidity in this fabrication process leaves little room for creative intervention and human activities and robotic process are often considered as two segregated processes.The paper will present and discuss the methodological and design challenges of interactive robotic fabrication of brickwork with an industrial robotic arm, a webcam and bricks with varying color tones. Emphasis will be on the integration of external computer vision libraries within Rhino Grasshopper to augment the interactive robotic process. The paper will describe and demonstrate a framework comprising (1) robotic pick and place, material selection and evaluation using computer vision, (2) interactive robotic actuation and (3) the role of human input during a probabilistic fabrication-based design process.
keywords	interactive robotic fabrication; human robot collaboration; computer vision; masonry; machine learning
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: