Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 657

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2020_652
id	sigradi2020_652
authors	Baldessin, Guilherme Quinilato; Vaz, Matheus Motta; Medeiros, Givaldo Luiz; Fabricio, Márcio Minto
year	2020
title	Modeling of steel and precast concrete components based on BIM systems and their application for the teaching of Architectural Design
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 652-659
summary	This paper addresses the development of parametric components based on BIM (Building Information Modeling) tools and their application for the teaching of architecture and urban designs, in a discipline focused on housing typology. As a didactic and research method, the use of industrialized building technologies in steel and precast concrete for production efficiency and low maintenance is associated with the idea of the studio as a laboratory for verification and experimentation. The system was improved for two years, and provided students with greater constructive control, basic feedback on the budget, and mastery of representation, while they investigated alternative design concepts and new components.
keywords	Architectural Design, Building Technology, BIM, Higher Education, Housing
series	SIGraDi
email
last changed	2021/07/16 11:52

_id	acadia20_202p
id	acadia20_202p
authors	Battaglia, Christopher A.; Verian, Kho; Miller, Martin F.
year	2020
title	DE:Stress Pavilion
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 202-207
summary	Print-Cast Concrete investigates concrete 3D printing utilizing robotically fabricated recyclable green sand molds for the fabrication of thin shell architecture. The presented process expedites the production of doubly curved concrete geometries by replacing traditional formwork casting or horizontal corbeling with spatial concrete arching by developing a three-dimensional extrusion path for deposition. Creating robust non-zero Gaussian curvature in concrete, this method increases fabrication speed for mass customized elements eliminating two-part mold casting by combining robotic 3D printing and extrusion casting. Through the casting component of this method, concrete 3D prints have greater resolution along the edge condition resulting in tighter assembly tolerances between multiple aggregated components. Print-Cast Concrete was developed to produce a full-scale architectural installation commissioned for Exhibit Columbus 2019. The concrete 3D printed compression shell spanned 12 meters in length, 5 meters in width, and 3 meters in height and consisted of 110 bespoke panels ranging in weight of 45 kg to 160 kg per panel. Geometrical constraints were determined by the bounding box of compressed sand mold blanks and tooling parameters of both CNC milling and concrete extrusion. Using this construction method, the project was able to be assembled and disassembled within the timeframe of the temporary outdoor exhibit, produce <1% of waste mortar material in fabrication, and utilize 60% less material to construct than cast-in-place construction. Using the sand mold to contain geometric edge conditions, the Print-Cast technique allows for precise aggregation tolerances. To increase the pavilions resistance to shear forces, interlocking nesting geometries are integrated into each edge condition of the panels with .785 radians of the undercut. Over extruding strategically during the printing process casts the undulating surface with accuracy. When nested together, the edge condition informs both the construction logic of the panel’s placement and orientation for the concrete panelized shell.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	ecaade2023_99
id	ecaade2023_99
authors	Dervishaj, Arlind, Fonsati, Arianna, Hernández Vargas, José and Gudmundsson, Kjartan
year	2023
title	Modelling Precast Concrete for a Circular Economy in the Built Environment
doi	https://doi.org/10.52842/conf.ecaade.2023.2.177
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 177–186
summary	In recent years, there has been a growing interest in adopting circular approaches in the built environment, specifically reusing existing buildings or their components in new projects. To achieve this, drawings, laser scanning, photogrammetry and other techniques are used to capture data on buildings and their materials. Although previous studies have explored scan-to-BIM workflows, automation of 2D drawings to 3D models, and machine learning for identifying building components and materials, a significant gap remains in refining this data into the right level of information required for digital twins, to share information and for digital collaboration in designing for reuse. To address this gap, this paper proposes digital guidelines for reusing precast concrete based on the level of information need (LOIN) standard EN 17412-1:2020 and examines several CAD and BIM modelling strategies. These guidelines can be used to prepare digital templates that become digital twins of existing elements, develop information requirements for use cases, and facilitate data integration and sharing for a circular built environment.
keywords	building information modelling (BIM), circular construction, reuse, concrete
series	eCAADe
email
last changed	2023/12/10 10:49

_id	caadria2020_332
id	caadria2020_332
authors	Taseva, Yoana, Eftekhar, Nik, Kwon, Hyunchul, Leschok, Matthias and Dillenburger, Benjamin
year	2020
title	Large-Scale 3D Printing for Functionally-Graded Facade
doi	https://doi.org/10.52842/conf.caadria.2020.1.183
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 183-192
summary	Additive manufacturing (AM) technologies such as fused deposition modeling (FDM) have been gaining ground in architecture due to their potential to fabricate geometrically complex building components with integrated functionality. With that in mind, this paper showcases a novel design and fabrication strategy for the production of functionally graded faÃ§ade elements. Three functional integrations are investigated: gradient infill structures (Figure 1), a non-orthogonal discretization approach for 3D-printed faÃ§ade elements, and an integrated snapping panel-to-panel connection system. The presented process is then incorporated into a large-scale demonstrator consisting of eight individual faÃ§ade-panel elements. This paper first presents a prototypical approach for a large-scale, graded 3D-printed facade system with non-standard discretization and then opens the discussion to further related challenges.
keywords	Large-scale 3D Printing; Freeform FaÃ§ade; Functional Integration; Complex 3D Assembly Connection
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2024_60
id	ecaade2024_60
authors	Wan, Zijun; Sun, Shuaibing; Meng, Fanjing; Yan, Yu
year	2024
title	How Augment Reality Support Public Participation in the Urban Design Decision-Making: A ten - year literature review
doi	https://doi.org/10.52842/conf.ecaade.2024.2.455
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 455–464
summary	Emerging applications of AR have demonstrated its powerful visualization capabilities, which is a potential solution to enhance public participation in the urban design process. However, there is still a lack of complete understanding of how AR gets involved in this decision-making process. Therefore, this paper reviews 33 empirical studies relating to the topic through the four steps of “PRISMA”. The results indicate that the quantity and quality of research is increasing yearly. As AR technology progresses, the techniques and research methods used in those studies show a trend toward diversification and customization; this has also led to a shift in the scale of urban design from large and abstract to small and concrete. In terms of content, the topics have gradually changed from “people group” to “technology”, and then to “environment”. Notably, a small number of cases in tangible interaction and multi-user collaboration have emerged from 2020 — areas showing great promise. In terms of user assessments, most studies give positive feedback, but there are currently concerns about problems in poor AR visualizations, privacy risks, and the social inequality caused by technical affordance.
keywords	Augment reality, Urban design and planning, Public participation, Collaborative and participative design, Design decision-making
series	eCAADe
email
last changed	2024/11/17 22:05

_id	acadia20_546
id	acadia20_546
authors	Yan Ng, Tsz; Ahlquist, Sean; Filipov, Evgueni; Weisman, Tracey
year	2020
title	Active-Casting
doi	https://doi.org/10.52842/conf.acadia.2020.1.546
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 546-555.
summary	Active-Casting explores the use of bespoke computer numerical controlled (CNC) manufactured knits to produce volumetric textile formwork for casting glass-fiber-reinforced concrete (GFRC). As a collaboration between experts in architecture, textile fabrication, and civil engineering, the research investigates multimaterial, functionally graded knit formwork as a fully seamless system to cast concrete. Working with controlled characteristics such as elasticity and stiffness of yarn type and knit structure, the soft textile is conceived as the vessel that defines the performative characteristics of volume, geometry, and surface detail. With only a minimal frame to suspend the volumetric cast, hydrostatic pressure “inflates” the fabric formwork, creating a dynamic form-finding process that eliminates the need for typical molding materials such as wood or foam. While active formfinding processes for CNC knit casting have been explored as an open-face, GFRC-sprayed system, the Active-Casting process produces a finished surface on all faces, embedded with expressions in form and surface detail from the knitted formwork. The precast units using this process reduce the amount of construction waste for formwork production, proposes a more automated fashion for manufacturing the formwork, and produces casts with complex geometries difficult to accomplish with traditional casting methods.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	sigradi2020_490
id	sigradi2020_490
authors	Santos, Ítalo Guedes dos; Andrade, Max Lira Veras Xavier de
year	2020
title	Standardization of Airport Architectural Design Projects BIM-based for Code Checking
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 490-498
summary	This paper addresses the use of BIM for code verification and automatic validation of the Architectural Design of Airports (ADA). In Brazil, the evaluation and approval of ADA are carried out by INFRAERO. Currently, designs are evaluated manually, resulting in errors and long evaluation time. To deal with this problem, a conceptual framework for automated ADA assessment with Code Checking is proposed. The method used was Design Science Research, with the proposal of an artifact. The partial results show the importance of establishing protocols for BIM modeling, based on IFC as an important tool for automated assessment with code checking.
keywords	Airports, Architectural Design of Airport, Building Information Modeling, Code Checking, IFC
series	SIGraDi
email
last changed	2021/07/16 11:49

_id	acadia23_v3_71
id	acadia23_v3_71
authors	Vassigh, Shahin; Bogosian, Biayna
year	2023
title	Envisioning an Open Knowledge Network (OKN) for AEC Roboticists
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	The construction industry faces numerous challenges related to productivity, sustainability, and meeting global demands (Hatoum and Nassereddine 2020; Carra et al. 2018; Barbosa, Woetzel, and Mischke 2017; Bock 2015; Linner 2013). In response, the automation of design and construction has emerged as a promising solution. In the past three decades, researchers and innovators in the Architecture, Engineering, and Construction (AEC) fields have made significant strides in automating various aspects of building construction, utilizing computational design and robotic fabrication processes (Dubor et al. 2019). However, synthesizing innovation in automation encounters several obstacles. First, there is a lack of an established venue for information sharing, making it difficult to build upon the knowledge of peers. First, the absence of a well-established platform for information sharing hinders the ability to effectively capitalize on the knowledge of peers. Consequently, much of the research remains isolated, impeding the rapid dissemination of knowledge within the field (Mahbub 2015). Second, the absence of a standardized and unified process for automating design and construction leads to the individual development of standards, workflows, and terminologies. This lack of standardization presents a significant obstacle to research and learning within the field. Lastly, insufficient training materials hinder the acquisition of skills necessary to effectively utilize automation. Traditional in-person robotics training is resource-intensive, expensive, and designed for specific platforms (Peterson et al. 2021; Thomas 2013).
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	acadia20_516
id	acadia20_516
authors	Aghaei Meibodi, Mania; Voltl, Christopher; Craney, Ryan
year	2020
title	Additive Thermoplastic Formwork for Freeform Concrete Columns
doi	https://doi.org/10.52842/conf.acadia.2020.1.516
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 516-525.
summary	The degree of geometric complexity a concrete element can assume is directly linked to our ability to fabricate its formwork. Additive manufacturing allows fabrication of freeform formwork and expands the design possibilities for concrete elements. In particular, fused deposition modeling (FDM) 3D printing of thermoplastic is a useful method of formwork fabrication due to the lightweight properties of the resulting formwork and the accessibility of FDM 3D printing technology. The research in this area is in early stages of development, including several existing efforts examining the 3D printing of a single material for formwork— including two medium-scale projects using PLA and PVA. However, the performance of 3D printed formwork and its geometric complexity varies, depending on the material used for 3D printing the formwork. To expand the existing research, this paper reviews the opportunities and challenges of using 3D printed thermoplastic formwork for fabricating custom concrete elements using multiple thermoplastic materials. This research cross-references and investigates PLA, PVA, PETG, and the combination of PLA-PVA as formwork material, through the design and fabrication of nonstandard structural concrete columns. The formwork was produced using robotic pellet extrusion and filament-based 3D printing. A series of case studies showcase the increased geometric freedom achievable in formwork when 3D printing with multiple materials. They investigate the potential variations in fabrication methods and their print characteristics when using different 3D printing technologies and printing materials. Additionally, the research compares speed, cost, geometric freedom, and surface resolution.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia20_108p
id	acadia20_108p
authors	Akbarzadeh, Masoud; Ghomi, Ali Tabatabaie; Bolhassani, Mohammad; Akbari, Mostafa; Seyedahmadian, Alireza; Papalexiou, Konstantinos
year	2020
title	Saltatur
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 108-113.
summary	The Saltatur (Dancer in Latin) demonstrates innovative research in the design and fabrication of a prefab structure consisting of spatial concrete nodes assembled in a compression-only configuration. The compression-only body is kept in equilibrium using the post-tensioning steel rods at the top and the bottom of the structure, supporting an ultra-thin glass structure on its top. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allows locking each member in its exact location in the body, obviating the need for a particular assembly sequence. A bespoke steel connection transfers the tensile forces between the concrete members effectively. Achieving a high level of efficiency in utilizing concrete for spatial systems requires a robust and powerful structural design and fabrication approach that has been meticulously exhibited in this project. The structural form of the project was developed using a three-dimensional geometry-based structural design method known as 3D Graphic Statics with precise control over the magnitude of the lateral forces in the system. The entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports. This particular internal distribution of forces in the form of the compression-only body reduces the bending moment in the system and, therefore, the required mass to span such a distance.
series	ACADIA
type	project
email
last changed	2021/10/26 08:03

_id	ecaade2020_427
id	ecaade2020_427
authors	Akçay Kavakoglu, Ayºegül
year	2020
title	Beyond Material - Digital Tectonics of Fabric and Concrete
doi	https://doi.org/10.52842/conf.ecaade.2020.1.089
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 89-96
summary	Fabric formwork, known as the casting concrete with flexible fabric molds, frees the nature of the material, which is fluidity; hence, its tectonics. This paper examines the tectonics of concrete and fabric through computational design and analog methods. During this examination, fabrigami technique is used to foresee the intuitive act of concrete within the fabric mold concerning the computational model. Fabrigami use in fabric formwork allows the emergence of a dynamic fabric mold system revealing form variations.
keywords	fabric formwork, fabrigami, folding, dynamic mold
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia20_236p
id	acadia20_236p
authors	Anton, Ana; Jipa, Andrei; Reiter, Lex; Dillenburger, Benjamin
year	2020
title	Fast Complexity
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 236-241
summary	The concrete industry is responsible for 8% of the global CO2 emissions. Therefore, using concrete in more complex and optimized shapes can have a significant benefit to the environment. Digital fabrication with concrete aims to overcome the geometric limitations of standardized formworks and thereby reduce the ecological footprint of the building industry. One of the most significant material economy potentials is in structural slabs because they represent 85% of the weight of multi-story concrete structures. To address this opportunity, Fast Complexity proposes an automated fabrication process for highly optimized slabs with ornamented soffits. The method combines reusable 3D-printed formwork (3DPF) and 3D concrete printing (3DCP). 3DPF uses binder-jetting, a process with submillimetre resolution. A polyester coating is applied to ensure reusability and smooth concrete surfaces otherwise not achievable with 3DCP alone. 3DPF is selectively used only where high-quality finishing is necessary, while all other surfaces are fabricated formwork-free with 3DCP. The 3DCP process was developed interdisciplinary at ETH Zürich and employs a two-component material system consisting of Portland cement mortar and calcium aluminate cement accelerator paste. This fabrication process provides a seamless transition from digital casting to 3DCP in a continuous automated process. Fast Complexity selectively uses two complementary additive manufacturing methods, optimizing the fabrication speed. In this regard, the prototype exhibits two different surface qualities, reflecting the specific resolutions of the two digital processes. 3DCP inherits the fine resolution of the 3DPF strictly for the smooth, visible surfaces of the soffit, for which aesthetics are essential. In contrast, the hidden parts of the slab use the coarse resolution specific to the 3DCP process, not requiring any formwork and implicitly achieving faster fabrication. In the context of an increased interest in construction additive manufacturing, Fast Complexity explicitly addresses the low resolution, lack of geometric freedom, and limited reinforcement options typical to layered extrusion 3DCP, as well as the limited customizability in concrete technology.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

_id	sigradi2020_297
id	sigradi2020_297
authors	Arboleda Pardo, Juan Gabriel; García-Alvarado, Rodrigo; Martínez Rocamora, Alejandro
year	2020
title	BIM-modeling and programming of curved concrete walls for 3D-printed construction
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 297-305
summary	This article presents the parametric design and modeling in BIM of curved walls for 3d-printed construction in concrete, seeking to manage the reduction of materials and construction execution times, and enhance its architectural expression. The process described here is structured in the following phases: (i) conceptual preliminary design exploration, defining formal parameters in Revit, (ii) parametric modeling with Dynamo and Revit, (iii) integration of structural validation and printing programming of the robotic arm, and examples of execution with 3D-printed construction.
keywords	BIM, Parametric programming, 3D-printed Construction, Curved wall, Digital fabrication
series	SIGraDi
email
last changed	2021/07/16 11:49

_id	acadia20_526
id	acadia20_526
authors	Bruce, Mackenzie; Clune, Gabrielle; Culligan, Ryan; Vansice, Kyle; Attraya, Rahul; McGee, Wes; Yan Ng, Tsz
year	2020
title	FORM{less}
doi	https://doi.org/10.52842/conf.acadia.2020.1.526
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 526-535
summary	Form{less} focuses on the creation of complex thin-shell concrete forms using robotically thermoformed plastic molds. Typically, similar molds would be created using the vacuum forming process, producing direct replications of the pattern. Creating molds with this process is not only time- and material-intensive but also costly if customization is involved. Thin-shell concrete forms often require a labor-intensive process of manually finishing the open-face surface. The devised process of thermoforming two nested molds allows the concrete to be cast in between, with finished surfaces on both sides. Molds made with polyethylene terephthalate glycol (PETG) allow the formwork to be reused and recycled. The research and fabrication work include the development of heating elements and the creation of the robotic process for forming the PETG. The PETG is manipulated via a robotic arm, with a custom magnetic end effector. The integration of robotics not only enables precision for manufacturing but also allows for replicability with unrestricted threedimensional deformation. The repeatable process allows for rapid prototyping and geometric customization. Design options are then simulated computationally using SuperMatterTools, enabling further design exploration of this process without the need for extensive physical prototyping. This research aims to develop a process that allows for the creation of complex geometries while reducing the amount of material waste used for concrete casting. The novelty of the process created by dynamically forming PETG allows for quick production of formwork that is both customizable and replicable. This method of creating double-sided building components is simulated at various scales of implementation.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2020_307
id	ecaade2020_307
authors	Caetano, Ines and Leitao, António
year	2020
title	When the Geometry Informs the Algorithm - A hybrid visual/textual programming framework for facade design
doi	https://doi.org/10.52842/conf.ecaade.2020.2.371
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 2, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 371-380
summary	Facade design is becoming increasingly complex, forcing architects to more frequently resort to analysis and optimization processes. However, these processes are time-consuming and require the coordination of multiple tools. Algorithmic Design (AD) has the potential to overcome these limitations through the use of algorithms implemented in Textual Programming Languages (TPLs) or Visual Programming Languages (VPLs). VPLs are more used in architecture due to their smoother learning curve and user-friendliness, but TPLs are better suited than VPLs for handling complex AD problems. To make TPLs more appealing to architects, we incorporated VPLs' features in the textual paradigm, namely, Visual Input Mechanisms (VIMs). In this paper, we propose an extension to an existing AD framework for the design exploration, analysis, and optimization of facades to support a TPL-based approach that handles VIMs.
keywords	Algorithmic Design; Facade Design; Textual Languages; Visual Input
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2020_830
id	sigradi2020_830
authors	Calvachi Arciniegas, Sandra; Bravo Montero, Juliana; Rosero Jurado, Juliana
year	2020
title	Poetic of Pasaje Corazon de Jesús building´s memory, in the times of the telegraph: Prototype of Video Mapping
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 830-838
summary	The project is about the elaboration of a Video Mapping projection over a facade´s model of the emblematic Pasaje Corazon de Jesús building, located in the city of Pasto, scale 1:15; since a conceptual point of view, through the narrative exploration created from the history of the own building itself in the period of time in which it worked as a telegraph and post office. This play proposes a new way to see and create the memory since the experiences with the purpose of communicates, keep and give value to the place´s historical memory and to its poetic.
keywords	Video Mapping, Poetic, Memory, Telegraph, Pasaje Corazon de Jesús building
series	SIGraDi
email
last changed	2021/07/16 11:53

_id	ecaade2020_348
id	ecaade2020_348
authors	Chiujdea, Ruxandra Stefania and Nicholas, Paul
year	2020
title	Design and 3D Printing Methodologies for Cellulose-based Composite Materials
doi	https://doi.org/10.52842/conf.ecaade.2020.1.547
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 547-554
summary	A growing awareness of architecture's environmental responsibility is encouraging a shift from an industrial age to an ecological one. This shift emphasises a new era of materiality, characterised by a special focus on bio-polymers. The potential of these materials is to address unsustainable modes of resource consumption, and to rebalance our relationship with the natural. However, bio-polymers also challenge current design and manufacturing practices, which rely on highly manufactured and standardized materials. In this paper, we present material experiments and digital design and fabrication methodologies for cellulose-based composites, to create porous biodegradable panels. Cellulose, the most abundant bio-polymer on Earth, has potential for differentiated architectural applications. A key limit is the critical role of additive fabrication methods for larger scale elements, which are a subject of ongoing research. In this paper, we describe how controlling the interdependent relationship between the additive manufacturing process and the material grading enables the manipulation of the material's performance, and the related control aspects including printing parameters such as speed, nozzle diameter, air flow, etc., as well as tool path trajectory. Our design exploration responds to the emerging fabrication methods to achieve different levels of porosity and depth which define the geometry of a panel.
keywords	cellulose-based composite material; additive manufacturing; material grading; digital fabrication; spatial print trajectory; porous panels
series	eCAADe
email
last changed	2022/06/07 07:56

_id	sigradi2020_254
id	sigradi2020_254
authors	Costa, Eduardo; Shepherd, Paul; Velasco, Rodrigo; Hudson, Roland
year	2020
title	Automating Concrete Construction: Sustainable social housing in Colombia
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 254-259
summary	The construction industry is a major source of carbon, and the main culprit is concrete. In addition, productivity for the construction sector is poor, and concrete construction in particular is labour intensive, slow, and costly. This paper introduces ongoing research addressing these two fundamental issues. First, by developing an integrated framework for automating manufacturing of reinforced concrete building elements through computation and robotic technology, and second by adapting such framework to the specific technical and socio- economic contexts of Colombian construction, specifically for social housing.
keywords	Non-prismatic concrete elements, Reinforced concrete, Flexible formwork, Parametric modelling, Construction in Colombia
series	SIGraDi
email
last changed	2021/07/16 11:48

_id	acadia20_604
id	acadia20_604
authors	Craney, Ryan; Adel, Arash
year	2020
title	Engrained Performance
doi	https://doi.org/10.52842/conf.acadia.2020.1.604
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 604-613.
summary	This project presents a novel fabrication-aware and performance-driven computational design method that facilitates the design and robotic fabrication of a wood shingle facade system. The research merges computational design, robotic fabrication, and building facade optimization into a seamless digital design-to-fabrication workflow. The research encompasses the following topics: (1) a constructive system integrating the rules, constraints, and dependencies of conventional shingle facades; (2) an integrative computational design method incorporating material, robotic fabrication, and assembly constraints; (3) an optimization method for facade sun shading; and (4) a digital design-to-fabrication workflow informing the robotic fabrication procedures. The result is an integrative computational design method for the design of a wood shingle facade. Environmental analysis and multi-objective optimization are coupled with a variable facade surface to produce several optimal design solutions that conform to the constraints of the robotic setup and constructive system. When applied to architectural design, the proposed integrative computational design method demonstrates significant improvements in facade sun-shading performance while also linking the digital design to the fabrication process.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia20_192p
id	acadia20_192p
authors	Doyle, Shelby; Hunt, Erin
year	2020
title	Melting 2.0
source	ACADIA 2020: Distributed Proximities / Volume II: Projects [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95253-6]. Online and Global. 24-30 October 2020. edited by M. Yablonina, A. Marcus, S. Doyle, M. del Campo, V. Ago, B. Slocum. 192-197
summary	This project presents computational design and fabrication methods for locating standard steel reinforcement within 3D printed water-soluble PVA (polyvinyl alcohol) molds to create non-standard concrete columns. Previous methods from “Melting: Augmenting Concrete Columns with Water Soluble 3D Printed Formwork” and “Dissolvable 3D Printed Formwork: Exploring Additive Manufacturing for Reinforced Concrete” (Doyle & Hunt 2019) were adapted for larger-scale construction, including the introduction of new hardware, development of custom programming strategies, and updated digital fabrication techniques. Initial research plans included 3D printing continuous PVA formwork with a KUKA Agilus Kr10 R1100 industrial robotic arm. However, COVID-19 university campus closures led to fabrication shifting to the author’s home, and this phase instead relied upon a LulzBot TAZ 6 (build volume of 280 mm x 280 mm x 250 mm) with an HS+ (Hardened Steel) tool head (1.2 mm nozzle diameter). Two methods were developed for this project phase: new 3D printing hardware and custom GCode production. The methods were then evaluated in the fabrication of three non-standard columns designed around five standard reinforcement bars (3/8-inch diameter): Woven, Twisted, Aperture. Each test column was eight inches in diameter (the same size as a standard Sonotube concrete form) and 4 feet tall, approximately half the height of an architecturally scaled 8-foot-tall column. Each column’s form was generated from combining these diameter and height restrictions with the constraints of standard reinforcement placement and minimum concrete coverage. The formwork was then printed, assembled, cast, and then submerged in water to dissolve the molds to reveal the cast concrete. This mold dissolving process limits the applicable scale for the work as it transitions from the research lab to the construction site. Therefore, the final column was placed outside with its mold intact to explore if humidity and water alone can dissolve the PVA formwork in lieu of submersion.
series	ACADIA
type	project
email
last changed	2021/10/26 08:08

For more results click below: