Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 191

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2021_106
id	ecaade2021_106
authors	Agirbas, Asli and Basogul, Elif Feyza
year	2021
title	Structural Performance of Reciprocal Structures formed by using Islamic Geometrical Patterns
doi	https://doi.org/10.52842/conf.ecaade.2021.2.391
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 391-400
summary	Many Islamic geometric patterns consist of stripes which are recognizable in the two dimensional patterns. These stripes systematically pass over or under each other, thus they create a tessellation. This system has the same principle with reciprocal frame structures. Considering this situation, in this study, it is aimed to lift the two dimensional Islamic geometric patterns to the third dimension with the principle of reciprocal frame structures. A selected Islamic geometric pattern has been lifted to the third dimension in the reciprocal structure principle, and structural analyzes have been performed.
keywords	Reciprocal frame structures; Islamic geometric patterns; Structural analysis
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia21_328
id	acadia21_328
authors	Akbari, Mostafa; Lu, Yao; Akbarzadeh, Masoud
year	2021
title	From Design to the Fabrication of Shellular Funicular Structures
doi	https://doi.org/10.52842/conf.acadia.2021.328
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 328-339.
summary	Shellular Funicular Structures (SFSs) are single-layer, two-manifold structures with anticlastic curvature, designed in the context of graphic statics. They are considered as efficient structures applicable to many functions on different scales. Due to their complex geometry, design and fabrication of SFSs are quite challenging, limiting their application in large scales. Furthermore, designing these structures for a predefined boundary condition, control, and manipulation of their geometry are not easy tasks. Moreover, fabricating these geometries is mostly possible using additive manufacturing techniques, requiring a lot of supports in the printing process. Cellular funicular structures (CFSs) as strut-based spatial structures can be easily designed and manipulated in the context of graphic statics. This paper introduces a computational algorithm for translating a Cellular Funicular Structure (CFS) to a Shellular Funicular Structure (SFS). Furthermore, it explains a fabrication method to build the structure out of a flat sheet of material using the origami/ kirigami technique as an ideal choice because of its accessibility, processibility, low cost, and applicability to large scales. The paper concludes by displaying a structure that is designed and fabricated using this technique.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2021_177
id	ecaade2021_177
authors	Aksin, Feyza Nur and Arslan Selçuk, Semra
year	2021
title	Use of Simulation Techniques and Optimization Tools for Daylight, Energy and Thermal Performance - The case of office module(s) in different climates
doi	https://doi.org/10.52842/conf.ecaade.2021.2.409
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 409-418
summary	In recent years, performance-based design has become the key issue behind design decisions in the construction industry towards reducing energy consumption. Various simulation techniques and optimization tools have started to be used together for performance objectives to reach optimal solutions for complex design process. In the sector, one of the most energy-consuming buildings is offices. This study examines the effects of integration of simulation programs and optimization tools on the daylight, energy and thermal performances of office buildings on different climates. Two cities, Ankara and Izmir, in Turkey selected as locations. The study is carried out with total of thirteen parameters. With Rhinoceros/Grasshopper software, Honeybee, Ladybug and Octopus plug-ins used for daylight, energy and thermal simulation and performance optimization. With the results obtained, the optimal configurations related with selected parameters are determined for reducing energy consumption while improving daylight and thermal performance on different climates.
keywords	daylight, energy and thermal comfort performance; multi-objective optimization; performance-based design; office buildings
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2021_130
id	ecaade2021_130
authors	Alassaf, Nancy and Clayton, Mark
year	2021
title	The Use of Diagrammatic Reasoning to Aid Conceptual Design in Building Information Modeling (BIM)
doi	https://doi.org/10.52842/conf.ecaade.2021.2.039
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 39-48
summary	Architectural design is an intellectual activity where the architect moves from the abstract to the real. In this process, the abstract represents the logical reasoning of how architectural form is configured or structured, while the real refers to the final physical form. Diagrams become an integral part of the conceptual design stage because they mediate between those two realms. Building Information Modeling (BIM) can reallocate the effort and time to emphasize conceptual design. However, many consider BIM a professionally-oriented tool that is less suitable for the early design stages. This research suggests that architectural design reasoning can be achieved using constraint-based parametric diagrams to aid conceptual design in BIM. The study examines several techniques and constructs a framework to use diagrams in the early design stages. This framework has been investigated through Villa Stein and Citrohan House by Le Corbusier. This study addresses two roles of diagrams: the generative role to create various design solutions and the analytical one to conduct an early performance study of the building. Our research contributes to the discussion on the ways designers can use digital diagrams to support the architectural design process.
keywords	Building Information Modeling (BIM); Performance analysis ; Architectural Form; Diagram; Parametric modeling
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia21_238
id	acadia21_238
authors	Anifowose, Hassan; Yan, Wei; Dixit, Manish
year	2021
title	BIM LOD + Virtual Reality
doi	https://doi.org/10.52842/conf.acadia.2021.238
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 238-245.
summary	Architectural Education faces limitations due to its tactile approach to learning in classrooms with only 2-D and 3-D tools. At a higher level, virtual reality provides a potential for delivering more information to individuals undergoing design learning. This paper investigates a hypothesis establishing grounds towards a new research in Building Information Modeling (BIM) and Virtual Reality (VR). The hypothesis is projected to determine best practices for content creation and tactile object virtual interaction, which potentially can improve learning in architectural & construction education with a less costly approach and ease of access to well-known buildings. We explored this hypothesis in a step-by-step game design demonstration in VR, by showcasing the exploration of the Farnsworth House and reproducing assemblage of the same with different game levels of difficulty which correspond with varying BIM levels of development (LODs). The game design prototype equally provides an entry way and learning style for users with or without a formal architectural or construction education seeking to understand design tectonics within diverse or cross-disciplinary study cases. This paper shows that developing geometric abstract concepts of design pedagogy, using varying LODs for game content and levels, while utilizing newly developed features such as snap-to-grid, snap-to-position and snap-to-angle to improve user engagement during assemblage may provide deeper learning objectives for architectural precedent study.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2021_225
id	ecaade2021_225
authors	Anishchenko, Maria and Paoletti, Ingrid
year	2021
title	Yarn-Level Modeling of Non-Uniform Knitted Fabric for Digital Analysis of Textile Characteristics - From a bitmap to the yarn-level model
doi	https://doi.org/10.52842/conf.ecaade.2021.1.253
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 253-262
summary	Modern CNC weft knitting machines are capable to produce textiles with complex non-uniform structures and shapes in a single operation with minimum human intervention. The type of knit structure and the settings of the knitting machine significantly influence the fabric characteristics and its role in architectural comfort. However, there is still no open-access tool for fast and efficient analysis of textiles with consideration of their knit structure, especially if they are knitted non-uniformly. Moreover, the existing methodologies of digital modeling of the knit structure are not linked to the actual production of textiles on flat-bed knitting machines. This paper presents a tool that "reads" a bitmap image that can be as well imported into a knitting machine software and generates a yarn-level geometry of the knitted textiles, that can be further integrated into the behavior analysis software within the rhino-grasshopper environment. This methodology helps to preview and analyze knitted textiles before production and can help to optimize the programming of bespoke knitted textiles for large-scale architectural applications.
keywords	knitting; computational knitting; digital simulation; textile characteristics; textiles for architecture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2021_060
id	ecaade2021_060
authors	Antinozzi, Sara, Ronchi, Diego, Fiorillo, Fausta and Barba, Salvatore
year	2021
title	3Dino: Configuration for a Micro-Photogrammetric Survey - Applying Dino-Lite microscope for the digitalization of a cuneiform tablet
doi	https://doi.org/10.52842/conf.ecaade.2021.2.211
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 211-222
summary	Close-range photogrammetry, due to the possibilities offered by the technological evolution of acquisition tools and, above all, the relative original challenges posed to surveyors and the theory of measurements, deserve constant critical attention. The new opportunities to detect and represent reality are mostly focused on historical architecture, referring to consequent orders of magnitude and restitution scales. On the other hand, the formalization of relevant practices for very small objects is not frequently addressed. In recent tests carried out using two Dino-Lite handheld digital microscope models, polarized light digital microscopes generally used in medical and industrial fields, we proved the potential of using these imaging systems also for Cultural Heritage documentation, highlighting, however, some issues related to the depth of field and the consequent acquisition geometry. Therefore, this study aims to solve these problems, increasing the performance of microscopic photogrammetry by optimizing the acquisition procedures with the design of custom accessories for micro-photogrammetry (e.g. a calibrated plate). These developments will be carried out as part of a technology transfer agreement with the Dino-Lite company pointed to codify a protocol for high accuracy photogrammetric documentation of small artefacts.
keywords	Digital Heritage; Small artefacts; Detailed 3D shape; Handheld microscope
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2021_085
id	ecaade2021_085
authors	Apolinarska, Aleksandra Anna, Kuhn, Mathias, Gramazio, Fabio and Kohler, Matthias
year	2021
title	Performance-Driven Design of a Reciprocal Frame Canopy - Timber structure of the FutureTree
doi	https://doi.org/10.52842/conf.ecaade.2021.1.497
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 497-504
summary	This paper presents the design process of a recently built, 107 m2 free-form timber frame canopy. The structure is an irregular, funnel-shaped reciprocal frame resting on a central concrete column, and has been fabricated using a robot-based assembly process. The project addresses several known design and fabrication challenges: modelling of free-form reciprocal frames, complex interrelations between their geometry and structural behaviour, as well as develops custom software tools to represent different models and interface design and structural analysis environments. The performance-driven design is exemplified by studies on the relationship between geometric parameters of the reciprocal frame and the resulting force-flow and flexural stiffness of the structure. The final design is obtained by differentiating geometry and stiffness to reduce deflection and tensile stresses while observing fabrication constraints.The project demonstrates the application of computational design to create customized, performance-driven and robotically fabricated structures, and its successful realization validates the methods under real-life planning and construction conditions.
keywords	Integrated computational design ; Performance-based design ; Reciprocal frames ; Timber structures; Robotic fabrication
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2021_203
id	ecaade2021_203
authors	Arora, Hardik, Bielski, Jessica, Eisenstadt, Viktor, Langenhan, Christoph, Ziegler, Christoph, Althoff, Klaus-Dieter and Dengel, Andreas
year	2021
title	Consistency Checker - An automatic constraint-based evaluator for housing spatial configurations
doi	https://doi.org/10.52842/conf.ecaade.2021.2.351
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 351-358
summary	The gradual rise of artificial intelligence (AI) and its increasing visibility among many research disciplines affected Computer-Aided Architectural Design (CAAD). Architectural deep learning (DL) approaches are being developed and published on a regular basis, such as retrieval (Sharma et al. 2017) or design style manipulation (Newton 2019; Silvestre et al. 2016). However, there seems to be no method to evaluate highly constrained spatial configurations for specific architectural domains (such as housing or office buildings) based on basic architectural principles and everyday practices. This paper introduces an automatic constraint-based consistency checker to evaluate the coherency of semantic spatial configurations of housing construction using a small set of design principles to evaluate our DL approaches. The consistency checker informs about the overall performance of a spatial configuration followed by whether it is open/closed and the constraints it didn't satisfy. This paper deals with the relation of spaces processed as mathematically formalized graphs contrary to existing model checking software like Solibri.
keywords	model checking, building information modeling, deep learning, data quality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2023_270
id	sigradi2023_270
authors	Asevedo, Laíze, Monteiro, Verner, Medeiros, Deisyanne, Rodrigues, Fernanda, Moura, Marcone and Rocha, Thuany
year	2023
title	Parameterization and Gamification in Descriptive Geometry Learning: One Study, Two Scenarios
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1047–1058
summary	Despite the complexity of parametric modeling, it is possible to apply it in educational context with a simpler approach. The COVID-19 pandemic increased the use of active methodologies in education. Gamification, particularly, should be emphasized regarding its association with parametric modeling. Post-pandemic scenario made possible the reinsertion of traditional practices, thus adding successful learning methods from online teaching. This paper aims to compare the adoption of parameterization and gamification to teach Descriptive Geometry on both teaching scenarios: online and presential. Two experiments were implemented to four Technical Drawing classes - A and B (2021), C and D (2022) -, in high school and technician level. The quantitative results addressed to the efficiency of parametric modeling as a didactic tool, and the qualitative results indicated that the students accepted the experiences of parameterization and gamification, on both scenarios. Nevertheless, there were subtle differences between the results from online and presential scenarios.
keywords	Online learning, presential learning, parameterization, gamification, descriptive geometry
series	SIGraDi
email
last changed	2024/03/08 14:08

_id	acadia21_258
id	acadia21_258
authors	Augustynowicz, Edyta; Smigielska, Maria; Nikles, Daniel; Wehrle, Thomas; Wagner, Heinz
year	2021
title	Parametric design and multirobotic fabrication of wood facades
doi	https://doi.org/10.52842/conf.acadia.2021.258
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 258-269.
summary	The paper describes the findings of the applied research project by Institute Integrative Design (currently ICDP) HGK FHNW and ERNE AG Holzbau to design and manufacture prefabricated wooden façades in the collaborative design manner between architects and industry. As such, it is an attempt to respond to the current interdisciplinary split in the construction, which blocks innovation and promotes standardized inefficient building solutions. Within this project, we apply three innovations in the industrial setup that result in the integrated design-to-production process of individualized, cost-efficient and well-crafted façades. The collaborative design approach is a method in which architect, engineer and manufacturer start exchange on the early stage of the project during the collaborative design workshops. Digital design and fabrication tools enable architects to generate a large scope of façade variations within production feasibility of the manufacturer and engineers to prepare files for robotic production. Novel multi-robot fabrication processes, developed with the industrial partner, allows for complex façade assembly. This paper introduces the concept of digital craftsmanship, manifested in a mixed fabrication system, which intelligently combines automated and manual production to obtain economic feasibility and highest aesthetic quality. Finally, we describe the design and fabrication of the project demonstrator consisting of four intricate façades on a modular office building, inspired by local traditional solutions, which validate the developed methods and highlight the architectural potential of the presented approach.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2021_263
id	ecaade2021_263
authors	Azadi, Shervin and Nourian, Pirouz
year	2021
title	GoDesign - A modular generative design framework for mass-customization and optimization in architectural design
doi	https://doi.org/10.52842/conf.ecaade.2021.1.285
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 285-294
summary	We present a modular generative design framework for design processes in the built environment that provides for the unification of participatory design and optimization to achieve mass-customization and evidence-based design. The paper articulates this framework mathematically as three meta procedures framing the typical design problems as multi-dimensional, multi-criteria, multi-actor, and multi-value decision-making problems: 1) space-planning, 2) configuring, and 3) shaping; structured as to the abstraction hierarchy of the chain of decisions in design processes. These formulations allow for applying various problem-solving approaches ranging from mathematical derivation & artificial intelligence to gamified play & score mechanisms and grammatical exploration. The paper presents a general schema of the framework; elaborates on the mathematical formulation of its meta procedures; presents a spectrum of approaches for navigating solution spaces; discusses the specifics of spatial simulations for ex-ante evaluation of design alternatives. The ultimate contribution of this paper is laying the foundation of comprehensive Spatial Decision Support Systems (SDSS) for built environment design processes.
keywords	Generative Design; Spatial Configuration; Serious Gaming; Mass Customization; Decision Problems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2021_222
id	ecaade2021_222
authors	Azambuja Varela, Pedro, Sousa, José Pedro and Silva Dias, Joana
year	2021
title	Drawing-to-Factory Process - Using freehand drawing to drive robotic assembly of brick walls
doi	https://doi.org/10.52842/conf.ecaade.2021.1.189
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 189-194
summary	The developments of digital technology applied to architecture in the recent decades has allowed for direct communication from the studio to fabrication. However, this process is typically dependent on complicated computational processes, enlarging the distance from the benefits of the traditional drawing approaches employed by architects. This research intends to explore possibilities of reenacting the drawing as a means of computational generative design which feeds automated systems of construction. By using a Cobot directed by an algorithm which reads a simple drawn curve on paper, an automated brick wall is built, as demonstrated in two exhibitions. This mixed approach allows for technology in architectural design and construction to be more accessible to a wider audience, while blurring the boundaries between concept and materialization.
keywords	robotic assembly; human-robot collaboration; non-standard structures; digital fabrication; computational design; interactive fabrication
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cdrf2021_368
id	cdrf2021_368
authors	B. Bala Murali Kumar, Yun Chung Hsueh, Zhuoyang Xin, and Dan Luo
year	2021
title	Process and Evaluation of Automated Robotic Fabrication System for In-Situ Structure Confinement
doi	https://doi.org/https://doi.org/10.1007/978-981-16-5983-6_34
source	Proceedings of the 2021 DigitalFUTURES The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021)
summary	The additive manufacturing process is gaining momentum in the construction industry with the rapid progression of large-scale 3D printed technologies. An established method of increasing the structural performance of concrete is by wrapping it with Fibre Reinforced Polymer (FRP). This paper proposes a novel additive process to fabricate a FRP formwork by dynamic layer winding of the FRP fabric with epoxy resin paired with an industrial scale robotic arm. A range of prototypes were fabricated to explore and study the fabrication parameters. Based on the systemic exploration, the limitations, the scope, and the feasibility of the proposed additive manufacturing method is studied for large scale customisable structural formworks.
series	cdrf
email
last changed	2022/09/29 07:53

_id	ecaade2021_241
id	ecaade2021_241
authors	Bitting, Selina, Azadi, Shervin and Nourian, Pirouz
year	2021
title	Reconfigurable Domes - Computational design of dry-fit blocks for modular vaulting
doi	https://doi.org/10.52842/conf.ecaade.2021.1.263
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 263-274
summary	In contrast to the contemporary aesthetic account, Muqarnas are geometrically complex variations of Squinches used for structural integration of rectilinear geometries and curved geometries. Inspired by the historical functionality of Muqarnas, we present a generalized computational workflow for generating dry-fit stacking modules from two-dimensional patterns in order to construct a dome. Similar to Muqarnas these blocks are modular in nature, complex in geometry, and compression-only in their structural behavior. We demonstrate the design of such structures based on the exemplary Penrose pattern and showcase the variations & potentials of this method in comparison to conventional approaches.
keywords	Muqarnas; Generative Design; Modular Design; Unreinforced Masonry Architecture; Penrose Tiling; Workflow Design
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2021_012
id	ecaade2021_012
authors	Blaney, Adam
year	2021
title	Material Units - Uploading information into matter via stimuli and the challenges of determining feedback
doi	https://doi.org/10.52842/conf.ecaade.2021.2.431
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 431-442
summary	Associative and generative design processes are capable of creating complex digital models, which can have their digital material properties (size, aesthetics, performance) infinitely adapted or radically transformed, relative to design demands, if they remain in their digital environments. Imagine, if physical materials and structures had these abilities, where design updates could be uploaded into a structure's physical material makeup at molecular resolutions. This could begin to enable a physical structure's matter to be reprogrammed so they can adapt across their length scales with high sensitivities and multi-material properties. To leverage these abilities, novel design and fabrication processes need to be developed, which enable interrelationships between design parameters, assembly mechanisms and material properties. This paper presents key findings and implications of two final prototypes, from a series, which developed a design and fabrication approach termed tuneable environments that enables interrelationships and design information to be uploaded into matter at granular resolutions.
keywords	tuneable environments; programmable matter
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia21_318
id	acadia21_318
authors	Borhani, Alireza; Kalantar, Negar
year	2021
title	Nesting Fabrication
doi	https://doi.org/10.52842/conf.acadia.2021.318
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 318-327.
summary	Positioned at the intersection of the computational modes of design and production, this research explains the principles and applications of a novel fabrication-informed geometric system called nesting. Applying the nesting fabrication method, the authors reimage the construction of complex forms by proposing geometric arrangements that lessen material waste and reduce production time, transportation cost, and storage space requirements. Through this method, appearance and performance characteristics are contingent on fabrication constraints and material behavior. In this study, the focus is on developing design rules for this method and investigating the main parameters involved in dividing the global geometry of a complex volume into stackable components when the first component in the stack gives shape to the second. The authors introduce three different strategies for nesting fabrication: 2D, 2.5D, and 3D nesting. Which of these strategies can be used depends on the geometrical needs of the design and available tools and materials. Next, by revisiting different fabrication approaches, the authors introduce readers to the possibility of large-scale objects with considerable overhangs without the need for nearly any temporary support structures. After establishing a workflow starting with the identification of geometric rules of nesting and ending with fabrication limits, this work showcases the proposed workflow through a series of case studies, demonstrating the feasibility of the suggested method and its capacity to integrate production constraints into the design process. Traversing from pragmatic to geometrical concerns, the approach discussed here offers an integrated approach supporting functional, structural, and environmental matters important when turning material, technical, assembly, and transportation systems into geometric parameters.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia21_400
id	acadia21_400
authors	Bruce, Mackenzie; Clune, Gabrielle; Xie, Ruxin; Mozaffari, Salma; Adel, Arash
year	2021
title	Cocoon: 3D Printed Clay Formwork for Concrete Casting
doi	https://doi.org/10.52842/conf.acadia.2021.400
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 400-409.
summary	Concrete, a material widely used in the construction industry today for its low cost and considerable strength as a composite building material, allows designers to work with nearly any form imaginable; if the technology to build the formwork is possible. By combining two historic and widely used materials, clay and concrete, our proposed novel process, Cocoon, integrates robotic clay three-dimensional (3D) printing as the primary formwork and incrementally casting concrete into this formwork to fabricate nonstandard concrete elements. The incremental casting and printing process anchors the concrete and clay together, creating a symbiotic and harmonious relationship. The concrete’s fluidity takes shape from the 3D printed clay formwork, allowing the clay to gain structure from the concrete as it cures. As the clay loses moisture, the formwork begins to shrink, crack, and reveal the concrete below. This self-demolding process produces easily removable formwork that can then be recycled by adding water to rehydrate the clay creating a nearly zero-waste formwork. This technique outlines multiple novel design features for complex concrete structures, including extended height limit, integrated void space design, tolerable overhang, and practical solutions for clay deformation caused by the physical stress during the casting process. The novelty of the process created by 3D printing clay formwork using an industrial robotic arm allows for rapid and scalable production of nearly zero-waste customizable formwork. More significant research implications can impact the construction industry, integrating more sustainable ways to build, enabled by digital fabrication technologies.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia21_362
id	acadia21_362
authors	Bruscia, Nicholas
year	2021
title	Surface Disclination Topology in Self-Reactive Shell Structures
doi	https://doi.org/10.52842/conf.acadia.2021.362
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 362-371.
summary	This paper discusses recent developments on the geometric construction and fabrication techniques associated with large-scale surface disclinations. The basic concept of disclinations recognizes the role of “defects” in the composition of materials, the strategic placement of which shapes the material by inducing curvature from initially planar elements. By acknowledging the relationship between geometry and topology that governs disclination based form-finding and material prototyping, this work consciously explores its potential at the architectural scale. Basic geometric figures and their topological transformations are documented in the context of digital modeling and simulation, fabrication, and a specific material palette. Specifically, this work builds on recent efforts by focusing on three particular areas of investigation; a) enhancing the stability of surface disclinations with a synthetic fibrous layer, b) aggregation via periodic tilings, and c) harnessing snap-through buckling to increase bending stiffness in thin surfaces.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2021_333
id	ecaade2021_333
authors	Burger, Joris, Wangler, Timothy, Chiu, Yu-Hung, Techathuvanun, Chanon, Gramazio, Fabio, Kohler, Matthias and Lloret-Fritschi, Ena
year	2021
title	Material-informed Formwork Geometry - The effects of cross-sectional variation and patterns on the strength of 3D printed eggshell formworks
doi	https://doi.org/10.52842/conf.ecaade.2021.2.199
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 199-208
summary	Fused deposition modelling (FDM) 3D printing of formworks for concrete has the potential to increase geometric freedom in concrete construction. However, one major limitation of FDM printed formworks is that they are fragile and often cannot support the hydrostatic pressure exerted by the concrete. The research project 'Eggshell' combines robotic 3D printing of formwork with the casting of a fast-hardening concrete to reduce hydrostatic pressure to a minimum. Eggshell can be used to fabricate architectural-scale building components; however, knowledge of the influence formwork geometry has on the hydrostatic pressure resistance is still sparse, resulting in unexpected breakages of the formwork. This paper presents an empirical study into the breakage behaviour of FDM printed formworks when subjected to hydrostatic pressure. Firstly, the study aims to give a first insight into the breakage behaviour of formworks with a constant cross-section by casting a self-compacting concrete into the formwork until breakage. Then, we investigate if three-dimensional patterning of the formwork can have a beneficial effect on the breakage behaviour. Finally, the preliminary results are validated through the fabrication of two full-scale columns. The empirical results point towards the fact that sharp corners in formworks are weaker compared to rounded corners. Although the presented results are still preliminary, they mark an important step in the development of reliable design and fabrication strategies using 3D printed formworks.
keywords	3D Printing; Formwork; Fused Deposition Modelling; Digital Concrete; Hydrostatic pressure; Eggshell
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: