Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2021_447
id	caadria2021_447
authors	Belek Fialho Teixeira, Muge, Pham, Kieu, Caldwell, Glenda, Seevinck, Jennifer, Swann, Levi, Rittenbruch, Markus, Kelly, Nick, Santo, Yasuhiro, Garcia-Hansen, Veronica and Voltz, Kirsty
year	2021
title	A User-Centred Focus on Augmented Reality and Virtual Reality in AEC: Opportunities and Barriers Identified by Industry Professionals - OPPORTUNITIES AND BARRIERS IDENTIFIED BY INDUSTRY PROFESSIONALS
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 273-283
doi	https://doi.org/10.52842/conf.caadria.2021.2.273
summary	This paper presents insights into the opportunities and barriers for using augmented reality (AR) and virtual reality (VR) in the architecture, engineering and construction (AEC) industry by contextualising how their adoption is leveraged in practices. Based on a review of literature, a qualitative study using semi-structured interviews was conducted with thirteen participants from AEC industries between five and thirty years of experience. Interviews were conducted face-to-face and virtually using questions focusing on participants experiences, perceptions of, and opinions about the use of AR/VR in AEC practice. Qualitative dissemination of key insights highlighted immediate and future possibilities for AR/VR, with current limitations that require future investigation from a user-centred perspective. Suggesting a XR-PACT framework, this paper frames key directions for future research to address current limitations and explore new opportunities that positively impact architecture and other professions, communities of building users.
keywords	Augmented Reality; Virtual Reality; AEC; User Experience; Technology Adoption
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia21_428
id	acadia21_428
authors	Rennen, Philipp; Khader, Noor; Hack, Norman; Kloft, Harald
year	2021
title	A Hybrid Additive Manufacturing Approach
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 428-437.
doi	https://doi.org/10.52842/conf.acadia.2021.428
summary	Research in the field of additive manufacturing with concrete has gained enormous momentum in recent years. In practice, the first fully functional and habitable buildings have been realized. While these lighthouse projects have proven the general feasibility of 3D printing in construction, in the future it will be a matter of further expanding the potential of 3D printing, addressing important topics such as functional integration (reinforcement, piping, fasteners), material gradation (load-bearing, insulating) as well as disassembly and reuse. As part of an international competition organized by LafargeHolcim Ltd. and its partners Witteveen & Bos, COBOD and Fondation des Ponts wich focused on realigning a traditionally manufactured residential building to concrete 3D printing technology, a team of students and researchers have developed a concept for a modular, function-integrated panel system for individualized wall and ceiling elements. The system is characterized by the fact that the integrated modular structures are printed flat on the floor and precise connections and structural joints are subtracted while the concrete is still in its green state.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ascaad2021_044
id	ascaad2021_044
authors	Özerol, Gizem; Semra Selçuk
year	2021
title	Designing Facades Based on Daylight Parameter: A Proposal for the Production of Complex Surface Panelization
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 58-68
summary	Nowadays, due to the increasing demand for sustainable design and energy efficient buildings, “performance” is becoming a key parameter behind design decisions. Traditional design methods may be insufficient in both evaluating the energy performance and producing optimized design alternatives, as well as in understanding the relationship between design variables and performance metrics. Recently, via parametric design tools and optimization algorithms, a wide range of design methods have been formed and various performance data have been measured and optimized. In this context, this study offers a design approach to integrate sustainability principles and physical environmental conditions into the design process as a quantifiable parameter used to improve building performance. Further, this study aims to design a facade and its modules based on environmental conditions in Istanbul, Turkey. The design process focuses on daylight radiation and the analysis of environmental data using a digital model. Rhino and Grasshopper software was used as the digital medium for design and Ladybug-Honeybee plugins were utilized in the analysis. Based on Istanbul’s weather data obtained from Ladybug, optimization of the model consisting of the first diagrams was achieved during the environmental analysis process. The model underwent the analysis process created for facade panelization and the panelization process was carried out according to daylight radiation. After the design process is completed, the model will be ready for production for the 3d printed model. As a result of the study, a discussion developed on how to integrate precast concrete panels into the design of complex geometrical surfaces using computational design techniques.
series	ASCAAD
email
last changed	2021/08/09 13:11

_id	caadria2021_309
id	caadria2021_309
authors	Gao, Xiaoni, Guo, Xiangmin and Lo, Tiantian
year	2021
title	Digital Infrastructure - A Potential Method for Rural Revitalization through Digitization of Rural Information
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 699-708
doi	https://doi.org/10.52842/conf.caadria.2021.2.699
summary	Rural revitalization is becoming a trend to improve the countrys economy. However, due to its remoteness and the infrastructure is not perfect, the village lacks the ability to attract young labor to some extent, reflecting the isolation of rural information. Thus, constructing rural information on digital infrastructure and breaking the barriers between urban and rural areas is based on a digital village and even intelligent village. This paper will discuss the potential of digitizing rural information, using digital information as a bridge between urban and rural areas, and connecting top-down and bottom-up stakeholders through a network or platform to promote rural cultural cognition and attract investment. The new form of rural development is a digital village that integrates rural information datas virtual interaction. The successful construction and promotion of digital villages will promote the revitalization of rural areas and data-driven development in the future information age.
keywords	digital infrastructure; rural information; digital data; virtual interaction; digitization
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2021_177
id	ecaade2021_177
authors	Aksin, Feyza Nur and Arslan Selçuk, Semra
year	2021
title	Use of Simulation Techniques and Optimization Tools for Daylight, Energy and Thermal Performance - The case of office module(s) in different climates
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 409-418
doi	https://doi.org/10.52842/conf.ecaade.2021.2.409
summary	In recent years, performance-based design has become the key issue behind design decisions in the construction industry towards reducing energy consumption. Various simulation techniques and optimization tools have started to be used together for performance objectives to reach optimal solutions for complex design process. In the sector, one of the most energy-consuming buildings is offices. This study examines the effects of integration of simulation programs and optimization tools on the daylight, energy and thermal performances of office buildings on different climates. Two cities, Ankara and Izmir, in Turkey selected as locations. The study is carried out with total of thirteen parameters. With Rhinoceros/Grasshopper software, Honeybee, Ladybug and Octopus plug-ins used for daylight, energy and thermal simulation and performance optimization. With the results obtained, the optimal configurations related with selected parameters are determined for reducing energy consumption while improving daylight and thermal performance on different climates.
keywords	daylight, energy and thermal comfort performance; multi-objective optimization; performance-based design; office buildings
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2021_007
id	ascaad2021_007
authors	Alabbasi, Mohammad; Han-Mei Chen, Asterios Agkathidis
year	2021
title	Developing a Design Framework for the 3D Printing Production of Concrete Building Components: A Case Study on Column Optimization for Efficient Housing Solutions in Saudi Arabia
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 713-726
summary	This paper is examining the development of a design and fabrication framework aiming to increase the efficiency of the construction of concrete building components by introducing 3D concrete printing in the context of Saudi Arabia. In particular, we will present an algorithmic process focusing on the design and fabrication of a typical, mass customised, single-family house, which incorporates parametric modelling, topology optimisation, finite element (FE) analysis and robotic 3D printing techniques. We will test and verify our framework by designing and fabricating a loadbearing concrete column with structural and material properties defined by the Saudi Building Code of Construction. Our findings are highlighting the advantages and challenges of the proposed file-to-factory framework in comparison to the conventional construction methods currently applied in Saudi Arabia, or other similar sociopolitical contexts. By comparing the material usage in both conventional and optimised columns, the results have shown that material consumption has been reduced by 25%, the required labour in the construction site has been mitigated by 28 and the duration time has been reduced by 80% without the need for formwork.
series	ASCAAD
email
last changed	2021/08/09 13:11

_id	acadia21_238
id	acadia21_238
authors	Anifowose, Hassan; Yan, Wei; Dixit, Manish
year	2021
title	BIM LOD + Virtual Reality
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 238-245.
doi	https://doi.org/10.52842/conf.acadia.2021.238
summary	Architectural Education faces limitations due to its tactile approach to learning in classrooms with only 2-D and 3-D tools. At a higher level, virtual reality provides a potential for delivering more information to individuals undergoing design learning. This paper investigates a hypothesis establishing grounds towards a new research in Building Information Modeling (BIM) and Virtual Reality (VR). The hypothesis is projected to determine best practices for content creation and tactile object virtual interaction, which potentially can improve learning in architectural & construction education with a less costly approach and ease of access to well-known buildings. We explored this hypothesis in a step-by-step game design demonstration in VR, by showcasing the exploration of the Farnsworth House and reproducing assemblage of the same with different game levels of difficulty which correspond with varying BIM levels of development (LODs). The game design prototype equally provides an entry way and learning style for users with or without a formal architectural or construction education seeking to understand design tectonics within diverse or cross-disciplinary study cases. This paper shows that developing geometric abstract concepts of design pedagogy, using varying LODs for game content and levels, while utilizing newly developed features such as snap-to-grid, snap-to-position and snap-to-angle to improve user engagement during assemblage may provide deeper learning objectives for architectural precedent study.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	sigradi2021_280
id	sigradi2021_280
authors	Banda, Pablo, García-Alvarado, Rodrigo and Munoz-Sanguinetti, Claudia
year	2021
title	Architectural Digital Design for 3D Printing Housing: Search for 3D Printing in Construction Trends for a Design Methodology
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1409–1421
summary	This paper proposes the development of a methodology for the digital generation of valid 3D-printed houses designs and fabrication programming, in the search for an emerging architectural language of this technology. The aim is to develop a transparent, generic and variable modeling and management process, based on some parametric patterns for 3D printing, architectural and construction design knowledge. That serves as an outline or insight of what can be designing architectural 3d-printed forms in the Construction 4.0 era. Preliminary results, discussion and further work are presented.
keywords	3D Printed Buildings, Generative Design, Parametric Design, Digital Fabrication, Housing
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	caadria2021_005
id	caadria2021_005
authors	Bedarf, Patrick, Martinez Schulte, Dinorah, Åženol, AyÃ§a, Jeoffroy, Etienne and Dillenburger, Benjamin
year	2021
title	Robotic 3D Printing of Mineral Foam for a Lightweight Composite Facade Shading Panel
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 603-612
doi	https://doi.org/10.52842/conf.caadria.2021.1.603
summary	This paper presents the design and fabrication of a lightweight composite facade shading panel using 3D printing (3DP) of mineral foams. Albeit their important role in industrial construction practice as insulators and lightweight materials, only little research has been conducted to use foams in 3DP. However, the recent development of highly porous mineral foams that are very suitable for extrusion printing opens a new chapter for development of geometrically complex lightweight building components with efficient formwork-free additive manufacturing processes. The work documented in this paper was based on preliminary material and fabrication development of a larger research endeavor and systematically explored designs for small interlocking foam modules. Furthermore, the robotic 3D Printing setup and subsequent processing parameters were tested in detail. Through extensive prototyping, the design space of a final demonstrator shading panel was mapped and refined. The design and fabrication process is documented and shows the potential of the novel material system in combination with fiber-reinforced ultra-high performance concrete (UHPC). The resulting composite shading panel highlights the benefits of using mineral foam 3DP to fabricate freeform stay-in-place formwork for lightweight facade applications. Furthermore, this paper discusses the challenges and limitations encountered during the project and gives a conclusive outlook for future research.
keywords	robotic 3d-printing; mineral foam; lightweight construction; concrete formwork; facade shading panel
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia21_400
id	acadia21_400
authors	Bruce, Mackenzie; Clune, Gabrielle; Xie, Ruxin; Mozaffari, Salma; Adel, Arash
year	2021
title	Cocoon: 3D Printed Clay Formwork for Concrete Casting
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 400-409.
doi	https://doi.org/10.52842/conf.acadia.2021.400
summary	Concrete, a material widely used in the construction industry today for its low cost and considerable strength as a composite building material, allows designers to work with nearly any form imaginable; if the technology to build the formwork is possible. By combining two historic and widely used materials, clay and concrete, our proposed novel process, Cocoon, integrates robotic clay three-dimensional (3D) printing as the primary formwork and incrementally casting concrete into this formwork to fabricate nonstandard concrete elements. The incremental casting and printing process anchors the concrete and clay together, creating a symbiotic and harmonious relationship. The concrete’s fluidity takes shape from the 3D printed clay formwork, allowing the clay to gain structure from the concrete as it cures. As the clay loses moisture, the formwork begins to shrink, crack, and reveal the concrete below. This self-demolding process produces easily removable formwork that can then be recycled by adding water to rehydrate the clay creating a nearly zero-waste formwork. This technique outlines multiple novel design features for complex concrete structures, including extended height limit, integrated void space design, tolerable overhang, and practical solutions for clay deformation caused by the physical stress during the casting process. The novelty of the process created by 3D printing clay formwork using an industrial robotic arm allows for rapid and scalable production of nearly zero-waste customizable formwork. More significant research implications can impact the construction industry, integrating more sustainable ways to build, enabled by digital fabrication technologies.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2021_333
id	ecaade2021_333
authors	Burger, Joris, Wangler, Timothy, Chiu, Yu-Hung, Techathuvanun, Chanon, Gramazio, Fabio, Kohler, Matthias and Lloret-Fritschi, Ena
year	2021
title	Material-informed Formwork Geometry - The effects of cross-sectional variation and patterns on the strength of 3D printed eggshell formworks
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 199-208
doi	https://doi.org/10.52842/conf.ecaade.2021.2.199
summary	Fused deposition modelling (FDM) 3D printing of formworks for concrete has the potential to increase geometric freedom in concrete construction. However, one major limitation of FDM printed formworks is that they are fragile and often cannot support the hydrostatic pressure exerted by the concrete. The research project 'Eggshell' combines robotic 3D printing of formwork with the casting of a fast-hardening concrete to reduce hydrostatic pressure to a minimum. Eggshell can be used to fabricate architectural-scale building components; however, knowledge of the influence formwork geometry has on the hydrostatic pressure resistance is still sparse, resulting in unexpected breakages of the formwork. This paper presents an empirical study into the breakage behaviour of FDM printed formworks when subjected to hydrostatic pressure. Firstly, the study aims to give a first insight into the breakage behaviour of formworks with a constant cross-section by casting a self-compacting concrete into the formwork until breakage. Then, we investigate if three-dimensional patterning of the formwork can have a beneficial effect on the breakage behaviour. Finally, the preliminary results are validated through the fabrication of two full-scale columns. The empirical results point towards the fact that sharp corners in formworks are weaker compared to rounded corners. Although the presented results are still preliminary, they mark an important step in the development of reliable design and fabrication strategies using 3D printed formworks.
keywords	3D Printing; Formwork; Fused Deposition Modelling; Digital Concrete; Hydrostatic pressure; Eggshell
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2021_202
id	ecaade2021_202
authors	Campos, Tatiana, Cruz, Paulo J. S. and Figueiredo, Bruno
year	2021
title	The Use of Natural Materials in Additive Manufacturing of Buildings Components - Towards a more sustainable architecture
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 355-364
doi	https://doi.org/10.52842/conf.ecaade.2021.1.355
summary	The demand for sustainable building materials is currently a major concern of society. It is known that the traditional construction industry requires a high consumption of inorganic materials, which is associated with the excessive production of waste. Thus, this article intends to demonstrate the possibility of using the Additive Manufacturing (AM) technique Paste Extrusion Modeling (PEM) in the production of reusable, biodegradable and recyclable construction systems, using a combination of different natural materials that have created multiple pastes with different additives.Cellulose is a natural material - biodegradable, recyclable and low cost - and its implementation aims to change some aspects of the current state of the construction sector and can have a real impact on the exploration of innovative solutions and more sustainable alternative building systems. The integration of AM techniques, PEM method, supported by computational modelling tools, will allow the definition of a building system and its components. Depending on the material used - natural materials or biomaterials - the constraints and limitations of AM will be considered.
keywords	Cellulose; Natural Fibers; Additive Manufacturing; Sustainable Construction
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2021_264
id	sigradi2021_264
authors	Cenci, Laline, Pinheiro Pires, Julio Cesar, Olivo, Paula, Keith Yonegura, Robison and Avalone Neto, Olavo
year	2021
title	The Experience of Digital Manufacturing and Rapid Prototyping in the Transdisciplinary Homo-Faber Workshop: Sharing the Game
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1269–1281
summary	The work presents the experience of Digital Fabrication and Rapid Prototyping with the objective of introducing concepts of Homo Faber, digital fabrication and rapid prototyping through the adoption of a teaching-learning strategy by gamification Homo Ludens for the construction of collective furniture. This challenge incorporates, not only the instrumentalization of new technologies for users of the Workshop, but extrapolates this field to expand the exercise of reflecting on an activity focused on the process rather than on the product.
keywords	Gamification, Digital Manufacturing, Rapid Prototyping, Architecture.
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	ijac202119201
id	ijac202119201
authors	Gumuskaya, Gizem
year	2021
title	Multimaterial bioprinting—minus the printer: Synthetic bacterial patterning with UV-responsive genetic circuits
source	International Journal of Architectural Computing 2021, Vol. 19 - no. 2, 121–141
summary	In this paper, we argue that synthetic biology can help us employ living systems’ unique capacity for self-construction and biomaterial production toward developing novel architectural fabrication paradigms, in which both the raw material production and its refinement into a target structure can be merged into a single computational process embedded in the living structure itself. To demonstrate, here we introduce bioPheme, a novel biofabrication method for engineering bacteria to build biomaterial(s) of designer’s choice into arbitrary 2D geometries specified via transient UV tracing. To this end, we present the design, construction, and testing of the enabling synthetic DNA circuit, which, once inserted into a bacterial colony, allows the bacteria to execute spatial computation by interacting with one another based on the if-then rules encoded in this circuit. At the heart of this genetic circuit is a pair of UV sensor – actuator, and a pair of cell-to-cell signal transmitter – receptor modules, created with genes extracted from the virus ? Phage and marine bacterium Vibrio fischeri, respectively. These modules are wired together to help designers engineer bacteria to build macro-scale structures with seamlessly integrated biomaterials, thereby bridge the molecular and architectural scales. In this way, a bacterial lawn can be programmed to produce different objects with complementary biomaterial compositions, such as a biomineralized superstructure and an elastic tissue filling in-between. In summary, this paper focuses on how scientists’ increasing ability to harness the innate computational capacity of living cells can help designers create self-constructing structures for architectural biofabrication. Through the discussions in this paper, we aim to initiate a shift in today’s biodesign practices toward a greater appreciation and adoption of bottom-up governance of living structures. We are confident that such a paradigm shift will allow for more efficient and sustainable biofabrication systems in the 4th industrial revolution and beyond.
keywords	Synthetic biology, architecture, optogenetics, design computation, genetic circuits, biofabrication, synthetic morphogenesis, computational fabrication, architectural fabrication, biodesign
series	journal
email
last changed	2024/04/17 14:29

_id	ijac202119104
id	ijac202119104
authors	Kieffer, Hyun Lynn; and Paul Nicholas
year	2021
title	Soft actuated material: Exploration of a programmable composite
source	International Journal of Architectural Computing 2021, Vol. 19 - no. 1, 50–66
summary	This paper describes the development of a programmable composite material and investigates its application in architecture as flexible and controllable surfaces. The composite leverages qualities found in the field of soft robots, that is, strength, precision, and the ability to change shape through vacuum actuation. It is an exploration of a range of applications for shape shifting composites within different phases of architecture. This research has deployed a controlled form-actuator of a designed surface as a reusable and flexible approach for concrete formwork and as a continuously changing spatial element, which aims to create a more engaging relationship between habitat and inhabitant. The design method linked to this composite aims to converge technology and material behavior and therethrough create a more linear process from design to construction. This paper elaborates on the design, simulation and fabrication methods, and their development through empirical research from individual actuatable cells to a controllable multi-cell surface and associated design tool.
keywords	Soft robots, programmable, artificial and deployable material, flexible architecture, shape-shifting composite, shape actuation
series	journal
email
last changed	2021/06/03 23:29

_id	ecaade2021_205
id	ecaade2021_205
authors	Kunic, Anja, Kramberger, Aljaz and Naboni, Roberto
year	2021
title	Cyber-Physical Robotic Process for Re-Configurable Wood Architecture - Closing the circular loop in wood architecture
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 181-188
doi	https://doi.org/10.52842/conf.ecaade.2021.2.181
summary	The concept of circularity implies that materials, components, systems can be re-utilized to reduce their environmental impact by extending their life-cycle. This paper discusses an approach to circular construction that revolves around transformable wood architecture. What if we can make buildings that can be assembled, disassembled, and re-assembled by robots in infinite circular loops of reconfigurations? To explore this concept, a robotic process is developed to automate the reconfiguration of timber structures, considering the material, geometric and processual challenges involved in the operations. This method entangles establishing a cyber-physical process based on visual and force feedback, the development of wood construction elements suitable for the process, the deployment of design algorithms for semi-autonomous online construction. The paper describes this setup and demonstrates its functionality through a set of experimental prototypes conceived and evaluated in a three-phase collaborative process of assembly-disassembly-reassembly.
keywords	Robotic timber construction; Circular wood architecture; Cyber-physical systems; Robotic timber re-assembly
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2021_078
id	caadria2021_078
authors	Li, Chao and Petzold, Frank
year	2021
title	Integrating digital design and Additive Manufacturing through BIM-based digital support - A decision support system using Semantic Web and Multi-Criteria Decision Making
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 263-270
doi	https://doi.org/10.52842/conf.caadria.2021.1.263
summary	Additive Manufacturing in Construction (AMC) envisions a possible alternative for predominantly manual construction with various benefits. In addition to the well-known extrusion-based implementations of AMC, other techniques have been developed to meet various visual and functional requirement. However, the application of Additive Manufacturing (AM) into construction projects has to be carefully evaluated, especially during the early phases of architectural design when important decisions are made. From this point, this work devised an AMC-Oriented Design Decision Support System (DDSS) to identify suitable building components which can be manufactured with specific AM methods. In such a DDSS, knowledge base and decision-making strategy are both critical. To this end, principle of leveraging Semantic Web techniques and Multi-Criteria Decision Making (MCDM) methodologies will be addressed. At the current stage of our research, pre-printed building components using concrete material are considered during the decision support process.
keywords	Additive Manufacturing in Construction; BIM; Design Decision Support System; Multi-Criteria Decision Making; Semantic Web
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2022_302
id	ecaade2022_302
authors	Lu, Xin, Meng, Zeyuan, Rodriguez, Alvaro Lopez and Pantic, Igor
year	2022
title	Reusable Augmented Concrete Casting System - Accessible method for formwork manufacturing through holographic guidance
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 371–380
doi	https://doi.org/10.52842/conf.ecaade.2022.1.371
summary	Reinforced concrete has been one of the essential materials for modern architecture for the last hundred years. Its use is entirely global, having been adopted by all cultures and styles since its invention in the late 19th century. Although its value is excellent due to its low cost, durability and adaptability, its environmental impact is significant, being, in fact, one of the most polluting industries in the world (Babor et al. 2009). This experimental project will research a more sustainable use of concrete, exploring a new form of reusable concrete formwork that will ideally reduce the CO2 footprint by removing wood waste in the casting process and replacing it with adaptable metal components. The modular part-based system for the concrete casting also attempts to simplify one of the current complexities for concrete construction, the Skilled-Labour shortage. (Yusoff et al. 2021). To mitigate this problem, the project also proposes using an Augmented Assembly logic for the casting parts to guide the ensemble and dismantle the formwork through an optimised algorithmic logic. The use of Augmented Reality as a replacement for traditional paper instructions will facilitate access to more workers to this construction art and potentially improve access to optimised use of concrete in developing communities with restricted building technological resources.
keywords	Mixed Reality, Distributed Manufacturing, Augmented Manufacturing, Sustainability, Computational Design, Concrete Casting
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ecaade2021_284
id	ecaade2021_284
authors	Luis, Orozco, Krtschil, Anna, Wagner, Hans-Jakob, Simon, Bechert, Amtsberg, Felix, Skoury, Lior, Knippers, Jan and Menges, Achim
year	2021
title	Design Methods for Variable Density, Multi-Directional Composite Timber Slab Systems for Multi-Storey Construction
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 303-312
doi	https://doi.org/10.52842/conf.ecaade.2021.1.303
summary	This paper presents an agent-based method for the design of complex timber structures. This method features a multi-level agent simulation, that relies on a feedback loop between agent systems and structural simulations that update the agent environment. Such an approach can usefully be applied for the design of variable density timber slab systems, where material arrangements based on structural, fabrication, and architectural boundary conditions are necessary. Such arrangements can lead to multi-directional spanning slabs that can accept pointwise supports in unique layouts. We discuss the implementation of such a method on the basis of the structural design of a pavilion-scale multi-storey testing setup. The presented method enables a more versatile approach to the design of multi-storey timber buildings, which should increase their applicability to a diverse range of building typologies.
keywords	Agent-Based Modelling; Robotic Timber Construction; Computational Design; Multi-Storey Timber Buildings
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia21_410
id	acadia21_410
authors	Meibodi, Mania Aghaei; Craney, Ryan; McGee, Wes
year	2021
title	Robotic Pellet Extrusion: 3D Printing and Integral Computational Design
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 410-419.
doi	https://doi.org/10.52842/conf.acadia.2021.410
summary	3D printing offers significant geometric freedom and allows the fabrication of integral parts. This research showcases how robotic fused deposition modeling (FDM) enables the prefabrication of large-scale, lightweight, and ready-to-cast freeform formwork to minimize material waste, labor, and errors in the construction process while increasing the speed of production and economic viability of casting non-standard concrete elements. This is achieved through the development of a digital design-to-production workflow for concrete formwork. All functions that are needed in the final product, an integrally insulated steel-reinforced concrete wall, and the process for a successful cast, are fully integrated into the formwork system. A parametric model for integrated structural ribbing is developed and verified using finite element analysis. A case study is presented which showcases the fully integrated system in the production of a 2.4 m tall x 2.0 m curved concrete wall. This research demonstrates the potential for large-scale additive manufacturing to enable the efficient production of non-standard concrete formwork.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

For more results click below: