Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 592

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2021_151
id	ascaad2021_151
authors	Allam, Samar; Soha El Gohary, Maha El Gohary
year	2021
title	Surface Shape Grammar Morphology to Optimize Daylighting in Mixed-Use Building Skin
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 479-492
summary	Building Performance simulation is escalating towards design optimization worldwide utilizing computational and advanced tools. Egypt has its plan and agenda to adopt new technologies to mitigate energy consumption through various sectors. Energy consumption includes electricity, crude oil, it encompasses renewable and non-renewable energy consumption. Egypt Electricity (EE) consumption by sector percentages is residential (47%), industrial (25%) and commercial (12%), with the remainder used by government, agriculture, public lighting and public utilities (4%). Electricity building consumption has many divisions includes HVAC systems, lighting, Computers and Electronics and others. Lighting share of electricity consumption can vary from 11 to 15 percent in mixed buildings as in our case study which definitely less that the amount used for HVAC loads. This research aims at utilizing shape morphogenesis on facades using geometric shape grammar to enhance daylighting while blocking longwave radiations causing heat stress. Mixed-use building operates in daytime more than night which emphasizes the objective of this study. Results evaluation is referenced to LEED v4.1 and ASHRAE 90.1-2016 window-to-wall ratio calibration and massive wall description. Geometric morphogenesis relies on three main parameters; Pattern (Geometry Shape Grammar: R1, R2, and R3), a reference surface to map from, and a target surface to map to which is the south-western façade of the case study. Enhancing Geo-morph rule is to guarantee flexibility due to the rotation of sun path annually with different azimuth and altitude angles and follow LEED V4.1 enhancements of opaque wall percent for building envelope.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	ecaade2021_237
id	ecaade2021_237
authors	Sönmez, Ayça and Gönenç Sorguç, Arzu
year	2021
title	Computer-Aided Fabrication Technologies as Computational Design Mediators
doi	https://doi.org/10.52842/conf.ecaade.2021.1.465
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 465-474
summary	The developments in recent technologies through Industry 4.0 lead to the integration of digital design and manufacturing processes. Albeit manufacturing continues to increase its importance as design input, it is generally considered at the last stages of the design process. This misconception results in a gap between digital design and fabrication, leading to differences between the initial design and the fabricated outcome in the context of architectural tectonics. Here, we present an artificial intelligence (AI)-based approach that aims to provide a basis to bridge the gap between computation and fabrication. We considered a case study of a 3D model in two stages. In the first stage, an intuitive and top-down design process is adopted, and in the second stage, an AI-based exploration is conducted with three cases derived from the same 3D model. The outcomes of the two stages provided a dataset including different design parameters to be used in a decision tree classifier algorithm which selects the manufacturing method for a given 3D model. Our results show that generative design simulations based on manufacturing constraints can provide a significant variety of manufacturable design alternatives, and minimizes the difference between design alternatives. Using our proposed approach, the time spent in form-finding and fabrication can be reduced significantly. Additionally, the implementation of decision tree classifier learning algorithm shows that AI can serve designers to make accurate predictions for manufacturing method.
keywords	Generative Design; Computer-Aided Fabrication; Arcihtecture 4.0; Artificial Intelligence; Digital Tectonics
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ecaade2021_177
id	ecaade2021_177
authors	Aksin, Feyza Nur and Arslan Selçuk, Semra
year	2021
title	Use of Simulation Techniques and Optimization Tools for Daylight, Energy and Thermal Performance - The case of office module(s) in different climates
doi	https://doi.org/10.52842/conf.ecaade.2021.2.409
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 409-418
summary	In recent years, performance-based design has become the key issue behind design decisions in the construction industry towards reducing energy consumption. Various simulation techniques and optimization tools have started to be used together for performance objectives to reach optimal solutions for complex design process. In the sector, one of the most energy-consuming buildings is offices. This study examines the effects of integration of simulation programs and optimization tools on the daylight, energy and thermal performances of office buildings on different climates. Two cities, Ankara and Izmir, in Turkey selected as locations. The study is carried out with total of thirteen parameters. With Rhinoceros/Grasshopper software, Honeybee, Ladybug and Octopus plug-ins used for daylight, energy and thermal simulation and performance optimization. With the results obtained, the optimal configurations related with selected parameters are determined for reducing energy consumption while improving daylight and thermal performance on different climates.
keywords	daylight, energy and thermal comfort performance; multi-objective optimization; performance-based design; office buildings
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cdrf2021_368
id	cdrf2021_368
authors	B. Bala Murali Kumar, Yun Chung Hsueh, Zhuoyang Xin, and Dan Luo
year	2021
title	Process and Evaluation of Automated Robotic Fabrication System for In-Situ Structure Confinement
doi	https://doi.org/https://doi.org/10.1007/978-981-16-5983-6_34
source	Proceedings of the 2021 DigitalFUTURES The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021)
summary	The additive manufacturing process is gaining momentum in the construction industry with the rapid progression of large-scale 3D printed technologies. An established method of increasing the structural performance of concrete is by wrapping it with Fibre Reinforced Polymer (FRP). This paper proposes a novel additive process to fabricate a FRP formwork by dynamic layer winding of the FRP fabric with epoxy resin paired with an industrial scale robotic arm. A range of prototypes were fabricated to explore and study the fabrication parameters. Based on the systemic exploration, the limitations, the scope, and the feasibility of the proposed additive manufacturing method is studied for large scale customisable structural formworks.
series	cdrf
email
last changed	2022/09/29 07:53

_id	sigradi2021_280
id	sigradi2021_280
authors	Banda, Pablo, García-Alvarado, Rodrigo and Munoz-Sanguinetti, Claudia
year	2021
title	Architectural Digital Design for 3D Printing Housing: Search for 3D Printing in Construction Trends for a Design Methodology
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1409–1421
summary	This paper proposes the development of a methodology for the digital generation of valid 3D-printed houses designs and fabrication programming, in the search for an emerging architectural language of this technology. The aim is to develop a transparent, generic and variable modeling and management process, based on some parametric patterns for 3D printing, architectural and construction design knowledge. That serves as an outline or insight of what can be designing architectural 3d-printed forms in the Construction 4.0 era. Preliminary results, discussion and further work are presented.
keywords	3D Printed Buildings, Generative Design, Parametric Design, Digital Fabrication, Housing
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	acadia21_400
id	acadia21_400
authors	Bruce, Mackenzie; Clune, Gabrielle; Xie, Ruxin; Mozaffari, Salma; Adel, Arash
year	2021
title	Cocoon: 3D Printed Clay Formwork for Concrete Casting
doi	https://doi.org/10.52842/conf.acadia.2021.400
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 400-409.
summary	Concrete, a material widely used in the construction industry today for its low cost and considerable strength as a composite building material, allows designers to work with nearly any form imaginable; if the technology to build the formwork is possible. By combining two historic and widely used materials, clay and concrete, our proposed novel process, Cocoon, integrates robotic clay three-dimensional (3D) printing as the primary formwork and incrementally casting concrete into this formwork to fabricate nonstandard concrete elements. The incremental casting and printing process anchors the concrete and clay together, creating a symbiotic and harmonious relationship. The concrete’s fluidity takes shape from the 3D printed clay formwork, allowing the clay to gain structure from the concrete as it cures. As the clay loses moisture, the formwork begins to shrink, crack, and reveal the concrete below. This self-demolding process produces easily removable formwork that can then be recycled by adding water to rehydrate the clay creating a nearly zero-waste formwork. This technique outlines multiple novel design features for complex concrete structures, including extended height limit, integrated void space design, tolerable overhang, and practical solutions for clay deformation caused by the physical stress during the casting process. The novelty of the process created by 3D printing clay formwork using an industrial robotic arm allows for rapid and scalable production of nearly zero-waste customizable formwork. More significant research implications can impact the construction industry, integrating more sustainable ways to build, enabled by digital fabrication technologies.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ascaad2021_028
id	ascaad2021_028
authors	Fahmy, Marwa
year	2021
title	Applying Urban Parametricism in the Design of Dynamic Neighborhoods
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 646-660
summary	Neighborhoods are considered basic spatial units of an urban area. Their forms have complex and hierarchical structures that contain building layouts, street segments, street networks and etc.. The traditional ways of computationally producing neighborhoods have proven incompetence. Some of these conventional ways focus on the morphological approaches, but they do not include all urban features. Meanwhile, other models that can design urban features have limited formulation flexibility. Besides the absence of dynamic generation behavior as they don’t use parametric techniques. They lack interactivity with the surroundings as they don’t use streets as the main generator of neighborhoods. Additionally, they don’t have the ability of automatically analyzing the site. Other models are generated for a specific location and miss the interactivity with other sites. This study implements parametric techniques to generate an urban model with wide design varieties. Furthermore, the model has dynamic morphological behavior, capable of interacting with the designer's modifications. This study focuses on the streets and grid as the dominant element of neighborhoods. The study also presents a predefined function in the scripting process. The model also proposes a python switcher to allow easy accessing all the inputs. Also, the research converts the elements to be more interactive, responsive, flexible, and dynamic. Therefore, all the neighborhood elements are simultaneously created according to user requirements. The study method is divided into three stages: Decomposition, Formulation, Modeling, and evaluation. Each process is defined with its tools, inputs, and parameters.
series	ASCAAD
email
last changed	2021/08/09 13:11

_id	caadria2023_127
id	caadria2023_127
authors	Franze, Anthony, Caldwell, Glenda, Belek Fialho Teixeira, Muge and Rittenbruch, Markus
year	2023
title	Informing User-Centred Approaches to Augmented Custom Manufacturing Practices
doi	https://doi.org/10.52842/conf.caadria.2023.1.353
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 353–362
summary	This practice-based research presents insights into the potential and challenges for augmented and mixed reality (AR/MR) technology to enhance Australian small-to-medium (SME) custom manufacturers’ agility to overcome existing Industry 4.0 (I4.0) workforce productivity and efficiency challenges. Moreover, it seeks to understand the technology’s ability to support custom manufacturers and the architectural, engineering and construction (AEC) sector transition to a more human-centric Industry 5.0 (I5.0) model, whereby the well-being of the fabricator is placed back at the centre of manufacturing processes. This qualitative study draws on interviews with eleven Australian custom manufacturing industry professionals to inform pertinent themes around fabricators’ current use and perceptions of mixed reality technology. Results indicate benefits for fabricators in reducing 2D drawing and task-related ambiguities in fabrication and assembly practices and reveal factors surrounding underutilisation. Synthesising insights and reflecting on Teixeira et al., (2021)’s XR-PACT framework, key research areas are identified for future AR/MR development centred on fabrication users’ distinct needs to improve accessibility, empower fabricators and ultimately assist the competitiveness of custom manufacturers and the AEC sector.
keywords	Augmented and Mixed Reality, Custom Manufacturing, SME, User-centred design, Industry 5.0
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	ascaad2021_065
id	ascaad2021_065
authors	Fraschini, Matteo; Julian Raxworthy
year	2021
title	Territories Made by Measure: The Parametric as a Way of Teaching Urban Design Theory
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 494-506
summary	Design tools like Grasshopper are often used to either generate novel forms, to automate certain design processes or to incorporate scientific factors. However, any Grasshopper definition has certain assumptions about design and space built into it from its earliest genesis, when the initial algorithm is set out. Correspondingly, implicit theoretical positions are built into definitions, and therefore its results. Approaching parametric design as a question of architectural, landscape architectural or urban design theory allows the breaking down of traditional boundaries between the technical and the historical or theoretical, and the way parametric design, and urban design history & theory, can be conveyed in the teaching environment. Once the boundaries between software and history & theory are transgressed, Grasshopper can be a way of testing the principles embedded in historical designs and thus these two disciplines can be joined. In urban design, there is an inherent clash between an ideal model and existing urban geography or morphology, and also between formal (qualitative) and numerical (quantitative) aspects. If a model provides a necessary vision for future development, an existing topography then results from the continuous human and natural modifications of a territory. To explore this hypothesis, the “Urban Design Representation” subject in the Master of Urban Design program at the University of Cape Town taught in 2017 & 2018 was approached “parametrically” from these two opposite, albeit convergent, starting points: the conceptual/rational versus the physical/empiric representations of a territory. In this framework, Grasshopper was used to represent typical standards and parameters of modern urban planning (for example, Floor/Area Ratio, height and distance between buildings, site coverage, etc), and a typological approach was adopted to study and “decode” the relationship between public and private space, between the street, the block and topography, between solids and voids. This methodology permits a cross-comparison of different urban design models and the immediate evaluation of their formal outputs derived from parametric data.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	ecaade2021_058
id	ecaade2021_058
authors	Lindner, Clemens, Langenhan, Christoph, Petzold, Frank, Schneider-Brachert, Wulf, Holzmann, Thomas, Rath, Anca and Widbiller, Matthias
year	2021
title	A Software Concept for Assessing the Risk of Infection in Enclosed Spaces - Exemplified by the COVID-19 pandemic
doi	https://doi.org/10.52842/conf.ecaade.2021.2.021
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 21-30
summary	The COVID-19 pandemic has immense impact on our daily life. Precautions like facemasks and social distancing restrict the economy as well as the social life. The aim of the bachelor project was to support architects by integrating health specifications into a software environment and automatically derive specific design support by analyzing architecture. This interdisciplinary project combined architectural and medical expertise to determine the risk of SARS-CoV-2-infection in enclosed spaces by a software approach on basis of parameters provided by the Max Planck Institute for Chemistry (Mainz, Germany) and the Association of German Engineers. Subsequently, calculated risks were evaluated by hygiene experts and summarized in a traffic light scheme, which is clearly intelligible and thus allows simple use. Furthermore, the software concept provides instructions for action for architects and specialists in the field of infection control and suggests architectural tools to minimize the risk of infection. The developed concept can be applied to an existing building and contribute to the planning of new buildings.
keywords	Building Information Modelling; Parametric Design; Design Support; COVID-19
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2021_266
id	ecaade2021_266
authors	Pibal, Sophia, Khoss, Konstantin and Kovacic, Iva
year	2021
title	Prototype of an Algorithm-Aided BIM Tool for Semi-Automated Generation of Modular Residential Buildings
doi	https://doi.org/10.52842/conf.ecaade.2021.2.067
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 67-76
summary	The research on novel design tools to enhance the production of residential buildings was the objective of this study. This ongoing research within the funded research project "Housing 4.0" aims to develop a BIM-based digital platform for ecological and affordable multi-storey housing. As part of the platform we developed the prototype of an Algorithm-aided BIM tool for the semi-automated generation of modular building designs.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2021_001
id	caadria2021_001
authors	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.)
year	2021
title	CAADRIA 2021: Projections, Volume 2
doi	https://doi.org/10.52842/conf.caadria.2021.2
source	PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, 764 p.
summary	Rapidly evolving technologies are increasingly shaping our societies as well as our understanding of the discipline of architecture. Computational developments in fields such as machine learning and data mining enable the creation of learning networks that involve architects alongside algorithms in developing new understanding. Such networks are increasingly able to observe current social conditions, plan, decide, act on changing scenarios, learn from the consequences of their actions, and recognize patterns out of complex activity networks. While digital technologies have already enabled architecture to transcend static physical boxes, new challenges of the present and visions for the future continue to call for both innovative responses integrating emerging technologies into experimental architectural practice and their critical reflection. In this process, the capability of adapting to complex social and environmental challenges through learning, prototyping and verifying solution proposals in the context of rapidly shifting realities has become a core challenge to the architecture discipline. Supported by advancing technologies, architects and researchers are creating new frameworks for digital workflows that engage with new challenges in a variety of ways. Learning networks that recognize patterns from massive data, rapid prototyping systems that flexibly iterate innovative physical solutions, and adaptive design methods all contribute to a flexible and networked digital architecture that is able to learn from both past and present to evolve towards a promising vision of the future.
series	CAADRIA
last changed	2022/06/07 07:49

_id	caadria2021_000
id	caadria2021_000
authors	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.)
year	2021
title	CAADRIA 2021: Projections, Volume 1
doi	https://doi.org/10.52842/conf.caadria.2021.1
source	PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, 768 p.
summary	Rapidly evolving technologies are increasingly shaping our societies as well as our understanding of the discipline of architecture. Computational developments in fields such as machine learning and data mining enable the creation of learning networks that involve architects alongside algorithms in developing new understanding. Such networks are increasingly able to observe current social conditions, plan, decide, act on changing scenarios, learn from the consequences of their actions, and recognize patterns out of complex activity networks. While digital technologies have already enabled architecture to transcend static physical boxes, new challenges of the present and visions for the future continue to call for both innovative responses integrating emerging technologies into experimental architectural practice and their critical reflection. In this process, the capability of adapting to complex social and environmental challenges through learning, prototyping and verifying solution proposals in the context of rapidly shifting realities has become a core challenge to the architecture discipline. Supported by advancing technologies, architects and researchers are creating new frameworks for digital workflows that engage with new challenges in a variety of ways. Learning networks that recognize patterns from massive data, rapid prototyping systems that flexibly iterate innovative physical solutions, and adaptive design methods all contribute to a flexible and networked digital architecture that is able to learn from both past and present to evolve towards a promising vision of the future.
series	CAADRIA
last changed	2022/06/07 07:49

_id	ascaad2021_118
id	ascaad2021_118
authors	Abdelmohsen, Sherif; Passaint Massoud
year	2021
title	Material-Based Parametric Form Finding: Learning Parametric Design through Computational Making
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 521-535
summary	Most approaches developed to teach parametric design principles in architectural education have focused on universal strategies that often result in the fixation of students towards perceiving parametric design as standard blindly followed scripts and procedures, thus defying the purpose of the bottom-up framework of form finding. Material-based computation has been recently introduced in computational design, where parameters and rules related to material properties are integrated into algorithmic thinking. In this paper, we discuss the process and outcomes of a computational design course focused on the interplay between the physical and the digital. Two phases of physical/digital exploration are discussed: (1) physical exploration with different materials and fabrication techniques to arrive at the design logic of a prototype panel module, and (2) deducing and developing an understanding of rules and parameters, based on the interplay of materials, and deriving strategies for pattern propagation of the panel on a façade composition using variation and complexity. The process and outcomes confirmed the initial hypothesis, where the more explicit the material exploration and identification of physical rules and relationships, the more nuanced the parametrically driven process, where students expressed a clear goal oriented generative logic, in addition to utilizing parametric design to inform form finding as a bottom-up approach.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	ascaad2021_071
id	ascaad2021_071
authors	Al Maani, Duaa; Saba Alnusairat, Amer Al-Jokhadar
year	2021
title	Transforming Learning for Architecture: Online Design Studio as New Norm for Crises Adaptation Under COVID-19
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 129-141
summary	For students, studying architecture necessitates a fundamental shift in learning mode and attitude in the transition from school. Beginner students are often surprised by the new mode of learning-by-doing and the new learner identity that they must adopt and adapt to in the design studio. Moreover, due to the COVID-19 pandemic, architecture teaching has moved online. Both instructors and students are experiencing dramatic changes in their modes of teaching and learning due to the sudden move from on-campus design studios to a virtual alternative, with only the bare minimum of resources and relevant experience. This study explored the virtual design studio as a transformative learning model for disaster and resilience context, including the factors that affect foundation students’ perceptions and experiences of the quality of this adaptation. Data obtained from 248 students who took online design studios during the lockdown in 15 universities in Jordan highlight many factors that make the experience of the online design studio more challenging. Despite these challenges, strongly positive aspects of the online studio were evident and widely discussed. A model of hyper-flexible design studio in which students can have a direct contact with their instructors when needed – in addition to online activities, reviews, and written feedback – is highly recommended for the beginner years. This HyFlex model will enrich students’ learning and understanding of the fundamentals of design and ensure that technology solutions deliver significant and sustainable benefits.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	sigradi2021_283
id	sigradi2021_283
authors	Alexandrino, Joao Victor Mota, Amorim, Leonardo Edson, Muniz, Vinícius Fernandes and Leite, Raquel Magalhaes
year	2021
title	Architecture and Context: A Data-based Approach to Optimize Climate Performance of Built Facades
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1139–1150
summary	The present research stems from a critical reflection about the environmental adaptability of existing building envelopes. The main goal is to explore how to balance environmental optimization with contextual constraints, using modularity, flexibility and mass customization as guiding principles. An application study was carried out with the development of a second skin proposal aligned with the use and context of the building under study. For this purpose, simulations that assess environmental conditions were developed within a visual programming tool, not only feeding the design process with essential information, but also providing a flexible creative process. Results show that such simulations allow the designer to interpret these studies more accurately, reducing the iterative guesswork, since in this workflow it is possible to transform these outputs into proposition parameters for new designs or interventions.
keywords	Data-Driven Analysis, Optimization, Parametric Facade Design, Thermal performance, High-low architecture, Mass Customization, Second Skin
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	ascaad2021_004
id	ascaad2021_004
authors	Ali, Nouran; Samir Hosny, Ahmed Abdin
year	2021
title	Thermal Performance of Nanomaterials of a Medium Size Office Building Envelope: With a Special Reference to Hot Arid Climatic Zone of Egypt
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 385-396
summary	Global warming is becoming a huge threat in the 21st century. The building is the main contributor to energy consumption and greenhouse gas emissions which play an important role in global warming. Using new technologies provides a step towards a better-built environment. Nanotechnology is an emerging technology that provides innovative materials that integrate with the building envelope to enhance energy efficiency and decrease energy consumption in buildings. Many Nano products are a promising candidate for building thermal insulation and increasing the building’s efficiency. This paper aims to reach minimum energy consumption by investigating Nanomaterials thermal performance on a building’s envelope in a hot arid climate. An office building in Cairo, Egypt is chosen as a case study. The paper presents an empirical/applied inquiry that is based on a computer simulation using Design Builder software. Energy consumption is calculated for different cases; the base model of the office building without using nanomaterials, and several nano models using nanomaterials. The results indicate that the use of Nanomaterials can enhance the thermal performance of the office building and save about 13.44 % of the annual energy consumption of the building.
series	ASCAAD
email
last changed	2021/08/09 13:11

_id	ascaad2021_146
id	ascaad2021_146
authors	Aly, Zeyad; Aly Ibrahim, Sherif Abdelmohsen
year	2021
title	Augmenting Passive Actuation of Hygromorphic Skins in Desert Climates: Learning from Thorny Devil Lizard Skins
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 264-278
summary	The exploitation of latent properties of natural materials such as wood in the passive actuation of adaptive building skins is of growing interest due to their added value as a low-cost and low-energy approach. The control of wood response behavior is typically conducted via physical experiments and numerical simulations that explore the impact of hygroscopic design parameters. Desert climates however suffer from water scarcity and high temperatures. Complementary mechanisms are needed to provide sufficient sources of water for effective hygroscopic operation. This paper aims to exploit such mechanisms, with specific focus on thorny devil lizard skins whose microstructure surface properties allow for maximum humidity absorption. We put forward that this process enhances hygroscopic-based passive actuation systems and their adaptation to both humidity and temperature in desert climates. Specific parameters and rules are deduced based on the lizard skin properties. Physical experiments are conducted to observe different actuation mechanisms. These mechanisms are recorded, and texture and bending morphologies are modeled for adaptive skins using Grasshopper.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	acadia21_258
id	acadia21_258
authors	Augustynowicz, Edyta; Smigielska, Maria; Nikles, Daniel; Wehrle, Thomas; Wagner, Heinz
year	2021
title	Parametric design and multirobotic fabrication of wood facades
doi	https://doi.org/10.52842/conf.acadia.2021.258
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 258-269.
summary	The paper describes the findings of the applied research project by Institute Integrative Design (currently ICDP) HGK FHNW and ERNE AG Holzbau to design and manufacture prefabricated wooden façades in the collaborative design manner between architects and industry. As such, it is an attempt to respond to the current interdisciplinary split in the construction, which blocks innovation and promotes standardized inefficient building solutions. Within this project, we apply three innovations in the industrial setup that result in the integrated design-to-production process of individualized, cost-efficient and well-crafted façades. The collaborative design approach is a method in which architect, engineer and manufacturer start exchange on the early stage of the project during the collaborative design workshops. Digital design and fabrication tools enable architects to generate a large scope of façade variations within production feasibility of the manufacturer and engineers to prepare files for robotic production. Novel multi-robot fabrication processes, developed with the industrial partner, allows for complex façade assembly. This paper introduces the concept of digital craftsmanship, manifested in a mixed fabrication system, which intelligently combines automated and manual production to obtain economic feasibility and highest aesthetic quality. Finally, we describe the design and fabrication of the project demonstrator consisting of four intricate façades on a modular office building, inspired by local traditional solutions, which validate the developed methods and highlight the architectural potential of the presented approach.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2021_005
id	caadria2021_005
authors	Bedarf, Patrick, Martinez Schulte, Dinorah, Åženol, AyÃ§a, Jeoffroy, Etienne and Dillenburger, Benjamin
year	2021
title	Robotic 3D Printing of Mineral Foam for a Lightweight Composite Facade Shading Panel
doi	https://doi.org/10.52842/conf.caadria.2021.1.603
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 603-612
summary	This paper presents the design and fabrication of a lightweight composite facade shading panel using 3D printing (3DP) of mineral foams. Albeit their important role in industrial construction practice as insulators and lightweight materials, only little research has been conducted to use foams in 3DP. However, the recent development of highly porous mineral foams that are very suitable for extrusion printing opens a new chapter for development of geometrically complex lightweight building components with efficient formwork-free additive manufacturing processes. The work documented in this paper was based on preliminary material and fabrication development of a larger research endeavor and systematically explored designs for small interlocking foam modules. Furthermore, the robotic 3D Printing setup and subsequent processing parameters were tested in detail. Through extensive prototyping, the design space of a final demonstrator shading panel was mapped and refined. The design and fabrication process is documented and shows the potential of the novel material system in combination with fiber-reinforced ultra-high performance concrete (UHPC). The resulting composite shading panel highlights the benefits of using mineral foam 3DP to fabricate freeform stay-in-place formwork for lightweight facade applications. Furthermore, this paper discusses the challenges and limitations encountered during the project and gives a conclusive outlook for future research.
keywords	robotic 3d-printing; mineral foam; lightweight construction; concrete formwork; facade shading panel
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: