Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 614

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2021_005
id	caadria2021_005
authors	Bedarf, Patrick, Martinez Schulte, Dinorah, Åženol, AyÃ§a, Jeoffroy, Etienne and Dillenburger, Benjamin
year	2021
title	Robotic 3D Printing of Mineral Foam for a Lightweight Composite Facade Shading Panel
doi	https://doi.org/10.52842/conf.caadria.2021.1.603
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 603-612
summary	This paper presents the design and fabrication of a lightweight composite facade shading panel using 3D printing (3DP) of mineral foams. Albeit their important role in industrial construction practice as insulators and lightweight materials, only little research has been conducted to use foams in 3DP. However, the recent development of highly porous mineral foams that are very suitable for extrusion printing opens a new chapter for development of geometrically complex lightweight building components with efficient formwork-free additive manufacturing processes. The work documented in this paper was based on preliminary material and fabrication development of a larger research endeavor and systematically explored designs for small interlocking foam modules. Furthermore, the robotic 3D Printing setup and subsequent processing parameters were tested in detail. Through extensive prototyping, the design space of a final demonstrator shading panel was mapped and refined. The design and fabrication process is documented and shows the potential of the novel material system in combination with fiber-reinforced ultra-high performance concrete (UHPC). The resulting composite shading panel highlights the benefits of using mineral foam 3DP to fabricate freeform stay-in-place formwork for lightweight facade applications. Furthermore, this paper discusses the challenges and limitations encountered during the project and gives a conclusive outlook for future research.
keywords	robotic 3d-printing; mineral foam; lightweight construction; concrete formwork; facade shading panel
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2021_008
id	ascaad2021_008
authors	Alabbasi, Mohammad; Han-Mei Chen, Asterios Agkathidis
year	2021
title	Assessing the Effectivity of Additive Manufacturing Techniques for the Production of Building Components: Implementing Innovation for Housing Construction in Saudi Arabia
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 214-226
summary	This paper examines the suitability of existing robotic technologies and large-scale 3D printing techniques for the fabrication of three-dimensional printed building components to be applied in the Saudi housing construction industry. The paper assesses a series of cases based on the applications for 3D-printing cement-based materials in construction. In particular, we investigate five different additive manufacturing techniques and evaluate their performance in terms of their flexibility/mechanism, control/navigation, calibration/operation system, fabrication suitability (in-situ or off-site), size of printed components, printing speed. The findings include in a matrix chart, where the advantages and disadvantages of each technique become evident. The paper further evaluates the suitability of each technique in relation to the particular climatical and socio-political context of Saudi Arabia, applicable to other construction industries with similar conditions.
series	ASCAAD
email
last changed	2021/08/09 13:11

_id	ecaade2021_169
id	ecaade2021_169
authors	Qi, Yue, Zhong, Ruqing, Kaiser, Benjamin, Tahouni, Yasaman, Wagner, Hans-Jakob, Verl, Alexander and Menges, Achim
year	2021
title	Augmented Accuracy - A human-machine integrated adaptive fabrication workflow for bamboo construction utilizing computer vision
doi	https://doi.org/10.52842/conf.ecaade.2021.1.345
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 345-354
summary	Despite being sustainable, strong and lightweight, naturally grown bamboo poles are currently used in restricted building typologies. This is due to the large tolerances in the built structures, which is caused by the variations in the dimensions and geometry of natural material as well as the manual, uninformed and imprecise assembly methods. In previous work, we introduced an adaptive fabrication method for bamboo structures that can monitor the fabrication process and compensate for deviations between built and designed form. As a proof of concept, the method is suitable for small scale bamboo structures in 2D- or simple 3D configuration. This paper extends the previous method by integrating the adaptation strategies into a cohesive fabrication and assembly workflow for large scale complex bamboo structures. To enable that, a more effective sensor localization method, adaptation algorithm, connection and assembly system, as well as web-based user interface are developed. The effectiveness of the proposed methods is demonstrated through the fabrication of a pavilion scale branching bamboo structure that complies with intended geometric boundary conditions. Even though the material has substantial geometrical variations, the final structure shows small geometric deviations and a successful interface with the prefabricated roof elements. Our work shows how vernacular materials and processes can be digitally augmented in order to reliably produce building structures, hence enabling their usage in modern applications to a larger extent.
keywords	Adaptive Digital Fabrication; Construction Uncertainties; Computer Vision; Bamboo Structures; HMI
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ijac202119103
id	ijac202119103
authors	Liu, Jingyang; Yi-Chin Lee, and Daniel Cardoso Llach
year	2021
title	Computational design and fabrication of highly customizable architectural space frames: Making a flat-cut Weaire-Phelan structure
source	International Journal of Architectural Computing 2021, Vol. 19 - no. 1, 37–49
summary	This paper documents a computational approach to the design, fabrication, and assembly of customizable space structures built entirely out of flat-cut interlocking elements without the need of nodes, fasteners, cement, or glue. Following a Research by Design (RbD) methodology, we establish a framework comprising geometric and parametric modeling, structural analysis, and digital fabrication stages to examine the following research question: how might the modularity of a construction kit be combined with the plasticity of parametric descriptions to facilitate the design and fabrication of flat-cut space structures? We find that an adaptive joint design that resolves local deformations at the node and element levels can facilitate the construction of flat-cut space structures by making modular components responsive to local geometric, material, and mechanical demands. The research centers on the design and construction of an architecture-scale installation based on the Weaire-Phelan structure—an aperiodic space-filling geometric structure that approximates the geometry of foam—entirely out of flat-cut interlocking elements. Documenting the process in technical detail, as well as some limitations, the paper contributes to recent efforts to develop digital materials suitable for architectural applications. In addition, it contributes to extend the formal and architectural possibilities of flat-cut space structure design by facilitating “bottom-up” design explorations in concert with the structure’s tectonic resolution.
keywords	Computational design, generative fabrication, construction kit
series	journal
email
last changed	2021/06/03 23:29

_id	acadia21_318
id	acadia21_318
authors	Borhani, Alireza; Kalantar, Negar
year	2021
title	Nesting Fabrication
doi	https://doi.org/10.52842/conf.acadia.2021.318
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 318-327.
summary	Positioned at the intersection of the computational modes of design and production, this research explains the principles and applications of a novel fabrication-informed geometric system called nesting. Applying the nesting fabrication method, the authors reimage the construction of complex forms by proposing geometric arrangements that lessen material waste and reduce production time, transportation cost, and storage space requirements. Through this method, appearance and performance characteristics are contingent on fabrication constraints and material behavior. In this study, the focus is on developing design rules for this method and investigating the main parameters involved in dividing the global geometry of a complex volume into stackable components when the first component in the stack gives shape to the second. The authors introduce three different strategies for nesting fabrication: 2D, 2.5D, and 3D nesting. Which of these strategies can be used depends on the geometrical needs of the design and available tools and materials. Next, by revisiting different fabrication approaches, the authors introduce readers to the possibility of large-scale objects with considerable overhangs without the need for nearly any temporary support structures. After establishing a workflow starting with the identification of geometric rules of nesting and ending with fabrication limits, this work showcases the proposed workflow through a series of case studies, demonstrating the feasibility of the suggested method and its capacity to integrate production constraints into the design process. Traversing from pragmatic to geometrical concerns, the approach discussed here offers an integrated approach supporting functional, structural, and environmental matters important when turning material, technical, assembly, and transportation systems into geometric parameters.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia21_400
id	acadia21_400
authors	Bruce, Mackenzie; Clune, Gabrielle; Xie, Ruxin; Mozaffari, Salma; Adel, Arash
year	2021
title	Cocoon: 3D Printed Clay Formwork for Concrete Casting
doi	https://doi.org/10.52842/conf.acadia.2021.400
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 400-409.
summary	Concrete, a material widely used in the construction industry today for its low cost and considerable strength as a composite building material, allows designers to work with nearly any form imaginable; if the technology to build the formwork is possible. By combining two historic and widely used materials, clay and concrete, our proposed novel process, Cocoon, integrates robotic clay three-dimensional (3D) printing as the primary formwork and incrementally casting concrete into this formwork to fabricate nonstandard concrete elements. The incremental casting and printing process anchors the concrete and clay together, creating a symbiotic and harmonious relationship. The concrete’s fluidity takes shape from the 3D printed clay formwork, allowing the clay to gain structure from the concrete as it cures. As the clay loses moisture, the formwork begins to shrink, crack, and reveal the concrete below. This self-demolding process produces easily removable formwork that can then be recycled by adding water to rehydrate the clay creating a nearly zero-waste formwork. This technique outlines multiple novel design features for complex concrete structures, including extended height limit, integrated void space design, tolerable overhang, and practical solutions for clay deformation caused by the physical stress during the casting process. The novelty of the process created by 3D printing clay formwork using an industrial robotic arm allows for rapid and scalable production of nearly zero-waste customizable formwork. More significant research implications can impact the construction industry, integrating more sustainable ways to build, enabled by digital fabrication technologies.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	sigradi2021_77
id	sigradi2021_77
authors	Gaete, Rocío and Rozas, Sebastián
year	2021
title	From the Vertical to the Horizontal: 3D Printing Without the Requirement of Formwork
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1151–1162
summary	The objective of this article is to develop a methodology to print self-supporting, synclastic and anticlastic double curved surfaces tending to the horizontal from the vertical without requiring formwork. To achieve this goal the following was studied, fist place, the definition, the stresses and behaviors of double curved surfaces. Second place, he performance and applications of 3D printing in the construction area, in three companies of this field. From the bibliographic review, the variables are identified to propose an algorithm to print synclastic and anticlastic surfaces in 3d. Finally, the feasibility of the method to print these types of surfaces in 3d was proven by printing four prototypes which confirmed the proper operation of the algorithm, along with showing aspects to improve at the time of printing.
keywords	Impresión 3D, Manufactura aditiva, cordón de impresión, anticlástica, sinclástica.
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	sigradi2021_83
id	sigradi2021_83
authors	Kim, Taeyong, Guida, George and Kim, Dongyun
year	2021
title	VitruviAR: Interactive Augmented Reality for Early Design Stage Applications
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1101–1112
summary	The increasing development of Augmented Reality (AR) applications have found prevalence within construction stages of architectural projects. The workflows developed within digital fabrication and assembly processes provide insights on how the design cycle could be completed through mixed reality. In this paper we present VitruviAR, an AR prototype for handheld devices which focuses on the design ideation stages of a project through an intuitive user interface and multi-functional toolset. Three design methodologies relating to the act of sketching digitally are proposed: freeform 3D sketching in point-based meshes, additive 3D sketching with primitive and scanned objects, and computational 3D sketching via a User Datagram Protocol (UDP). These each demonstrate engaging ways of designing and visualizing new spaces and interacting with urban contexts in real-time.
keywords	Augmented Reality, Design, Accessibility, Interaction
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	cdrf2021_349
id	cdrf2021_349
authors	Mirko Daneluzzo and Michele Daneluzzo
year	2021
title	Reinventing Staircases for Thermoplastic Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-16-5983-6_32
source	Proceedings of the 2021 DigitalFUTURES The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021)
summary	The paper presents an ongoing project focusing on the application of additive manufacturing technologies for the design of staircases. Additive digital fabrication allows architects to reinvestigate materials, processes, and creates new design opportunities to explore novel aesthetical and functional expression in architecture, enabling a reinterpretation of the typology of the staircase, using thermoplastic materials. This paper reviews the opportunities and challenges of using 3D printing for fabricating custom stairs with complex geometries in two studied configurations.
series	cdrf
email
last changed	2022/09/29 07:53

_id	caadria2021_213
id	caadria2021_213
authors	Oghazian, Farzaneh and Vazquez, Elena
year	2021
title	A Multi-Scale Workflow for Designing with New Materials in Architecture: Case Studies across Materials and Scales - Case studies across materials and scales
doi	https://doi.org/10.52842/conf.caadria.2021.1.533
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 533-542
summary	In this paper, we present a workflow developed for designing with and scaling-up new materials in architecture through an iterative cycle of materialization and testing. The framework establishes a connection between design requirements and form, taking advantage of different scales in new materials known as micro, meso, and macroscale in the process of design/manufacture. Different scales when dealing with material systems-especially in those that possess some level of uncertainty in their behavior from the formation process-make it challenging to deal with the different material variables controlled at each scale. This paper presents a brief review of existing design workflows centered on material properties. We then discuss case studies and argue for a multi-scale approach for design. Finally, we present the workflow. By implementing the workflow on two case studies, we answer how we can include material scales and their embedded properties as the central part of the design/manufacture process to aid in implementing new materials in architecture. The case studies are a responsive skin system and a free-standing tensile structure incorporating 3D printed wood filament and knitted yarn as the primary material.
keywords	material computation; material-based design; wood 3D printing; knitting; multi-scale workflow
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	cdrf2021_286
id	cdrf2021_286
authors	Yimeng Wei, Areti Markopoulou, Yuanshuang Zhu,Eduardo Chamorro Martin, and Nikol Kirova
year	2021
title	Additive Manufacture of Cellulose Based Bio-Material on Architectural Scale
doi	https://doi.org/https://doi.org/10.1007/978-981-16-5983-6_27
source	Proceedings of the 2021 DigitalFUTURES The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021)
summary	There are severe environmental and ecological issues once we evaluate the architecture industry with LCA (Life Cycle Assessment), such as emission of CO2 caused by necessary high temperature for producing cement and significant amounts of Construction Demolition Waste (CDW) in deteriorated and obsolete buildings. One of the ways to solve these problems is Bio-Material. CELLULOSE and CHITON is the 1st and 2nd abundant substance in nature (Duro-Royo, J.: Aguahoja_ProgrammableWater-based Biocomposites for Digital Design and Fabrication across Scales. MIT, pp. 1–3 (2019)), which means significantly potential for architectural dimension production. Meanwhile, renewability and biodegradability make it more conducive to the current problem of construction pollution. The purpose of this study is to explore Cellulose Based Biomaterial and bring it into architectural scale additive manufacture that engages with performance in the material development, with respect to time of solidification and control of shrinkage, as well as offering mechanical strength. At present, the experiments have proved the possibility of developing a cellulose-chitosan- based composite into 3D-Printing Construction Material (Sanandiya, N.D., Vijay, Y., Dimopoulou, M., Dritsas, S., Fernandez, J.G.: Large-scale additive manufacturing with bioinspired cellulosic materials. Sci. Rep. 8(1), 1–5 (2018)). Moreover, The research shows that the characteristics (Such as waterproof, bending, compression, tensile, transparency) of the composite can be enhanced by different additives (such as xanthan gum, paper fiber, flour), which means it can be customized into various architectural components based on Performance Directional Optimization. This solution has a positive effect on environmental impact reduction and is of great significance in putting the architectural construction industry into a more environment-friendly and smart state.
series	cdrf
email
last changed	2022/09/29 07:53

_id	ecaade2021_040
id	ecaade2021_040
authors	Zhan, Qiang, Wu, Hao, Zhang, Liming, Yuan, Philip F. and Gao, Tianyi
year	2021
title	3D Concrete Printing with Variable Width Filament
doi	https://doi.org/10.52842/conf.ecaade.2021.2.153
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 153-160
summary	Traditional mold-based concrete construction methods are inefficient, poor quality, and labor-intensive. Concrete 3D printing technology is expected to replace traditional methods as an emerging intelligent construction method due to its flexible, automatic, fast, and mold-free features. Concrete 3D printing is a method by extruding and selectively laminating construction materials onto a specific path, relying on fine-grained control of the printing material and the printing device. However, the maximum printing resolution is limited by the width of the toolpath. Filament width and printing resolution are two main factors that need to balance. In this paper, a variable width printing method is proposed using the active nozzle speed control method. The width of the print path can be adjusted according to the model details. A width control algorithm is proposed. The general workflow of variable width printing, including model preparation, toolpath planning, robotic fabrication, is also introduced, and a concrete bench is printed for experimental validation. The result shows great application potential for surface decoration and structural reinforcement. The efficiency, feasibility, and problems encountered in printing are analyzed and summarized.
keywords	3D concrete printing; variable filament width; robotic fabrication
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2021_047
id	ecaade2021_047
authors	Zhang, Xiao, Yuan, Chao, Yang, Liu, Yu, Peiran, Ma, Yiwen, Qiu, Song, Guo, Zhe and Yuan, Philip F.
year	2021
title	Design and Fabrication of Formwork for Shell Structures Based on 3D-printing Technology
doi	https://doi.org/10.52842/conf.ecaade.2021.1.487
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 487-496
summary	Shell structure is a kind of structure using a small amount of materials to obtain a large-span multi-functional space. However, lots of formwork and scaffold materials are often wasted in the construction process. This paper focuses on the shell structure construction using robotic 3D printing PLA (an environmental friendly material) technology as the background. The author explores the possibility of 3D printing technology in shell construction from small scale models in different construction method, and gradually optimizes the shell template shape suitable for PLA material in full-scale construction. Finally, the research team chose the bending-active 3D printing type and completed the construction of three full-scale concrete shell molds. Under the guidance of professor Philippe Block, the research team finished the final 3D printing mold with optimized slicing and bending logic and successfully used it as the template mold to carry the tiles which proved the feasibility of this construction method.
keywords	Shell structure ; Formwork ; Geometric analysis; Form-finding; 3d printing
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2021_092
id	caadria2021_092
authors	Dickey, Rachel
year	2021
title	The Acoustic Pavilion - Prototyping Alternatives for Gypsum based Construction
doi	https://doi.org/10.52842/conf.caadria.2021.1.523
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 523-532
summary	Gypsum is one of the most commonly used building materials today and prevalent in architectural acoustics. However, despite its ubiquitous appropriation, few domains of research or practice seek to provide opportunistic approaches for its acoustical application. This paper outlines the computational design and fabrication processes for the development of a pavilion that explores alternative acoustic applications for gypsum. It demonstrates how sound performance can drive the conceptual agenda for a project by articulating the conditions of spatial experience through the design of architectural surface.
keywords	fabrication; computational design; acoustics; reflective surfaces; diffusive surfaces
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia21_292
id	acadia21_292
authors	Schumann, Kyle; MacDonald, Katie
year	2021
title	Pillow Forming
doi	https://doi.org/10.52842/conf.acadia.2021.292
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 292-301.
summary	Recent decades have seen the development of increasingly powerful digital modeling and fabrication tools applied to the creation of molds or formwork for cast or formed materials. Many of these processes are highly customizable but resource intensive, singular in geometry, and disposable. This paper introduces pillow forming as a customizable, reusable forming system aimed at minimizing the resource intensity of construction and capable of producing both standardized and unique curved molded panels. The apparatus consists of a field of pneumatic pillows that inflate to form a complex curved surface with which various materials can be formed or cast. The design and construction of the system is discussed, including the modular inflation system, pneumatic and electronic control systems, control software run through Rhinoceros, Grasshopper, and Arduino, as well as the standard operation procedure. The system is demonstrated through the production of Homegrown, an architectural installation built of pillow formed biomaterial aggregate. Various limitations and opportunities of the system are discussed and analyzed, and opportunities for future development and applications in sustainable construction are posited.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ascaad2021_007
id	ascaad2021_007
authors	Alabbasi, Mohammad; Han-Mei Chen, Asterios Agkathidis
year	2021
title	Developing a Design Framework for the 3D Printing Production of Concrete Building Components: A Case Study on Column Optimization for Efficient Housing Solutions in Saudi Arabia
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 713-726
summary	This paper is examining the development of a design and fabrication framework aiming to increase the efficiency of the construction of concrete building components by introducing 3D concrete printing in the context of Saudi Arabia. In particular, we will present an algorithmic process focusing on the design and fabrication of a typical, mass customised, single-family house, which incorporates parametric modelling, topology optimisation, finite element (FE) analysis and robotic 3D printing techniques. We will test and verify our framework by designing and fabricating a loadbearing concrete column with structural and material properties defined by the Saudi Building Code of Construction. Our findings are highlighting the advantages and challenges of the proposed file-to-factory framework in comparison to the conventional construction methods currently applied in Saudi Arabia, or other similar sociopolitical contexts. By comparing the material usage in both conventional and optimised columns, the results have shown that material consumption has been reduced by 25%, the required labour in the construction site has been mitigated by 28 and the duration time has been reduced by 80% without the need for formwork.
series	ASCAAD
email
last changed	2021/08/09 13:11

_id	sigradi2021_28
id	sigradi2021_28
authors	Atsumi, Kei, Hanazato, Toshihiro and Kato, Osamu
year	2021
title	The Assembly and Fabrication of Double Curved Panel Structure Using Japanese wood Joints created by Desktop 3D Printers
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1245–1255
summary	This research presents a new direction for freeform structure assembly and fabrication through the collaboration of 3D printing technology and Japanese wood joining technology. Full-scale, self-build prototyping is demonstrated without glue or metal fittings. Rather than relying on digital fabrication machines to match the architectural scale, this study utilizes the Fused Filament Fabrication (FFF) with desktop 3D printers, which is the most widespread and inexpensive printing technology. By incorporating the perspectives of wood joinery and compact 3D printers, this study promotes a drastic change in 3D printed architectural production from a massive structure-oriented system to a module-oriented system. The project demonstrates how artisanal knowledge integrates with 3D printing architectural production by reconfiguring joint geometry, parametric modeling, fabrication, and assembly processes. We discuss our research process and final achievements, and we provide new ideas for architectural production using digital fabrication.
keywords	Digital fabrication, Assembly, Japanese wood joints, 3D printing, Double- curved panel structure
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	sigradi2021_280
id	sigradi2021_280
authors	Banda, Pablo, García-Alvarado, Rodrigo and Munoz-Sanguinetti, Claudia
year	2021
title	Architectural Digital Design for 3D Printing Housing: Search for 3D Printing in Construction Trends for a Design Methodology
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 1409–1421
summary	This paper proposes the development of a methodology for the digital generation of valid 3D-printed houses designs and fabrication programming, in the search for an emerging architectural language of this technology. The aim is to develop a transparent, generic and variable modeling and management process, based on some parametric patterns for 3D printing, architectural and construction design knowledge. That serves as an outline or insight of what can be designing architectural 3d-printed forms in the Construction 4.0 era. Preliminary results, discussion and further work are presented.
keywords	3D Printed Buildings, Generative Design, Parametric Design, Digital Fabrication, Housing
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	caadria2021_329
id	caadria2021_329
authors	Breseghello, Luca, Sanin, Sandro and Naboni, Roberto
year	2021
title	Toolpath Simulation,Design and Manipulation in Robotic 3D Concrete Printing
doi	https://doi.org/10.52842/conf.caadria.2021.1.623
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 623-632
summary	Digital fabrication is blurring the boundaries between design, manufacturing and material effects. More and more experimental design processes involve an intertwined investigation of these aspects, especially when it comes to additive techniques such as 3D Concrete Printing (3DCP). Conventional digital tools present limitations in the description of an object, which neglects material, textural, and machinic information. In this paper, we exploit the control of extrusion-based 3D printing via programmed layered toolpath as a design method for enhancing the control of the manufactured architectural elements. The paper presents an experimental framework for design, analysis and fabrication with 3DCP, developing a system for materializing interdependencies between geometry, material, performance. This is applied to a series of architectural artefacts which demonstrate the advantages and possibilities opened by the introduced workflow, expanding the design process towards higher control on the objects buildability, structural integrity and aesthetic. manufacturing and material effects. More and more experimental design processes involve an intertwined investigation of these aspects, especially when it comes to additive techniques such as 3D Concrete Printing (3DCP). Conventional digital tools present limitations in the description of an object, which neglects material, textural, and machinic information. In this paper, we exploit the control of extrusion-based 3D printing via programmed layered toolpath as a design method for enhancing the control of the manufactured architectural elements. The paper presents an experimental framework for design, analysis and fabrication with 3DCP, developing a system for materializing interdependencies between geometry, material, performance. This is applied to a series of architectural artefacts which demonstrate the advantages and possibilities opened by the introduced workflow, expanding the design process towards higher control on the objects buildability, structural integrity and aesthetic."
keywords	3D Concrete Printing; Robotic Fabrication; Additive Manufacturing; Toolpath Simulation; Toolpath Manipulation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2021_333
id	ecaade2021_333
authors	Burger, Joris, Wangler, Timothy, Chiu, Yu-Hung, Techathuvanun, Chanon, Gramazio, Fabio, Kohler, Matthias and Lloret-Fritschi, Ena
year	2021
title	Material-informed Formwork Geometry - The effects of cross-sectional variation and patterns on the strength of 3D printed eggshell formworks
doi	https://doi.org/10.52842/conf.ecaade.2021.2.199
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 199-208
summary	Fused deposition modelling (FDM) 3D printing of formworks for concrete has the potential to increase geometric freedom in concrete construction. However, one major limitation of FDM printed formworks is that they are fragile and often cannot support the hydrostatic pressure exerted by the concrete. The research project 'Eggshell' combines robotic 3D printing of formwork with the casting of a fast-hardening concrete to reduce hydrostatic pressure to a minimum. Eggshell can be used to fabricate architectural-scale building components; however, knowledge of the influence formwork geometry has on the hydrostatic pressure resistance is still sparse, resulting in unexpected breakages of the formwork. This paper presents an empirical study into the breakage behaviour of FDM printed formworks when subjected to hydrostatic pressure. Firstly, the study aims to give a first insight into the breakage behaviour of formworks with a constant cross-section by casting a self-compacting concrete into the formwork until breakage. Then, we investigate if three-dimensional patterning of the formwork can have a beneficial effect on the breakage behaviour. Finally, the preliminary results are validated through the fabrication of two full-scale columns. The empirical results point towards the fact that sharp corners in formworks are weaker compared to rounded corners. Although the presented results are still preliminary, they mark an important step in the development of reliable design and fabrication strategies using 3D printed formworks.
keywords	3D Printing; Formwork; Fused Deposition Modelling; Digital Concrete; Hydrostatic pressure; Eggshell
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: