Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	ijac202119103
id	ijac202119103
authors	Liu, Jingyang; Yi-Chin Lee, and Daniel Cardoso Llach
year	2021
title	Computational design and fabrication of highly customizable architectural space frames: Making a flat-cut Weaire-Phelan structure
source	International Journal of Architectural Computing 2021, Vol. 19 - no. 1, 37–49
summary	This paper documents a computational approach to the design, fabrication, and assembly of customizable space structures built entirely out of flat-cut interlocking elements without the need of nodes, fasteners, cement, or glue. Following a Research by Design (RbD) methodology, we establish a framework comprising geometric and parametric modeling, structural analysis, and digital fabrication stages to examine the following research question: how might the modularity of a construction kit be combined with the plasticity of parametric descriptions to facilitate the design and fabrication of flat-cut space structures? We find that an adaptive joint design that resolves local deformations at the node and element levels can facilitate the construction of flat-cut space structures by making modular components responsive to local geometric, material, and mechanical demands. The research centers on the design and construction of an architecture-scale installation based on the Weaire-Phelan structure—an aperiodic space-filling geometric structure that approximates the geometry of foam—entirely out of flat-cut interlocking elements. Documenting the process in technical detail, as well as some limitations, the paper contributes to recent efforts to develop digital materials suitable for architectural applications. In addition, it contributes to extend the formal and architectural possibilities of flat-cut space structure design by facilitating “bottom-up” design explorations in concert with the structure’s tectonic resolution.
keywords	Computational design, generative fabrication, construction kit
series	journal
email
last changed	2021/06/03 23:29

_id	acadia21_328
id	acadia21_328
authors	Akbari, Mostafa; Lu, Yao; Akbarzadeh, Masoud
year	2021
title	From Design to the Fabrication of Shellular Funicular Structures
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 328-339.
doi	https://doi.org/10.52842/conf.acadia.2021.328
summary	Shellular Funicular Structures (SFSs) are single-layer, two-manifold structures with anticlastic curvature, designed in the context of graphic statics. They are considered as efficient structures applicable to many functions on different scales. Due to their complex geometry, design and fabrication of SFSs are quite challenging, limiting their application in large scales. Furthermore, designing these structures for a predefined boundary condition, control, and manipulation of their geometry are not easy tasks. Moreover, fabricating these geometries is mostly possible using additive manufacturing techniques, requiring a lot of supports in the printing process. Cellular funicular structures (CFSs) as strut-based spatial structures can be easily designed and manipulated in the context of graphic statics. This paper introduces a computational algorithm for translating a Cellular Funicular Structure (CFS) to a Shellular Funicular Structure (SFS). Furthermore, it explains a fabrication method to build the structure out of a flat sheet of material using the origami/ kirigami technique as an ideal choice because of its accessibility, processibility, low cost, and applicability to large scales. The paper concludes by displaying a structure that is designed and fabricated using this technique.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2021_085
id	ecaade2021_085
authors	Apolinarska, Aleksandra Anna, Kuhn, Mathias, Gramazio, Fabio and Kohler, Matthias
year	2021
title	Performance-Driven Design of a Reciprocal Frame Canopy - Timber structure of the FutureTree
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 497-504
doi	https://doi.org/10.52842/conf.ecaade.2021.1.497
summary	This paper presents the design process of a recently built, 107 m2 free-form timber frame canopy. The structure is an irregular, funnel-shaped reciprocal frame resting on a central concrete column, and has been fabricated using a robot-based assembly process. The project addresses several known design and fabrication challenges: modelling of free-form reciprocal frames, complex interrelations between their geometry and structural behaviour, as well as develops custom software tools to represent different models and interface design and structural analysis environments. The performance-driven design is exemplified by studies on the relationship between geometric parameters of the reciprocal frame and the resulting force-flow and flexural stiffness of the structure. The final design is obtained by differentiating geometry and stiffness to reduce deflection and tensile stresses while observing fabrication constraints.The project demonstrates the application of computational design to create customized, performance-driven and robotically fabricated structures, and its successful realization validates the methods under real-life planning and construction conditions.
keywords	Integrated computational design ; Performance-based design ; Reciprocal frames ; Timber structures; Robotic fabrication
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2021_138
id	ecaade2021_138
authors	Liapi, Katherine and Liosi, Dimitra
year	2021
title	An Immersive Modular Museum-Archive Concept Model - An integration of shape grammars with virtual reality
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 323-332
doi	https://doi.org/10.52842/conf.ecaade.2021.2.323
summary	The paper presents a concept model of a modular exhibition that is designed to function as a museum in the physical environment and as an archive of architectural projects in the virtual. A design method based on shape grammars and inspired by the Bauhaus teaching, has been used to generate both the museum spaces and the archive which expands endlessly as the acquisition of architectural exhibits keeps increasing. Specifically, rules that control the geometric organization, tectonic expression and linear or radial expansion of a modular assembly of interlocking physical or virtual spaces, leading to various self-similar spatial patterns, have been developed. Several scenarios of the visitors' interaction with the exhibits and the museum's space with the use of VR and AR have been explored. In the actual museum scenario, physically present visitors can interact with the exhibits which are enriched with digital information. In the case of the archive, the Unity platform is used for the development of a virtual experience of the visitor who interacts with the expanding space and exhibits in a purely immersive manner.
keywords	virtual reality, augmented reality, shape grammars, golden ration, modular museum, archive, Bauhaus teaching
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2022_302
id	ecaade2022_302
authors	Lu, Xin, Meng, Zeyuan, Rodriguez, Alvaro Lopez and Pantic, Igor
year	2022
title	Reusable Augmented Concrete Casting System - Accessible method for formwork manufacturing through holographic guidance
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 371–380
doi	https://doi.org/10.52842/conf.ecaade.2022.1.371
summary	Reinforced concrete has been one of the essential materials for modern architecture for the last hundred years. Its use is entirely global, having been adopted by all cultures and styles since its invention in the late 19th century. Although its value is excellent due to its low cost, durability and adaptability, its environmental impact is significant, being, in fact, one of the most polluting industries in the world (Babor et al. 2009). This experimental project will research a more sustainable use of concrete, exploring a new form of reusable concrete formwork that will ideally reduce the CO2 footprint by removing wood waste in the casting process and replacing it with adaptable metal components. The modular part-based system for the concrete casting also attempts to simplify one of the current complexities for concrete construction, the Skilled-Labour shortage. (Yusoff et al. 2021). To mitigate this problem, the project also proposes using an Augmented Assembly logic for the casting parts to guide the ensemble and dismantle the formwork through an optimised algorithmic logic. The use of Augmented Reality as a replacement for traditional paper instructions will facilitate access to more workers to this construction art and potentially improve access to optimised use of concrete in developing communities with restricted building technological resources.
keywords	Mixed Reality, Distributed Manufacturing, Augmented Manufacturing, Sustainability, Computational Design, Concrete Casting
series	eCAADe
email
last changed	2024/04/22 07:10

_id	caadria2021_137
id	caadria2021_137
authors	Fattahi Tabasi, Saba, Alaghmandan, Matin and Rafizadeh, Hamid Reza
year	2021
title	Simultaneous effect of form modifications and topology of the bracing system on the structural performance of timber high rise building - Introducing an innovative approach using parametric design
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 421-430
doi	https://doi.org/10.52842/conf.caadria.2021.1.421
summary	Topology optimization is a tool that minimizes the material consumption in a structure, while at the same time provides us design alternatives integrating architectural and structural engineering concepts. However, topology optimization is a structural engineering subject and its known methods are required professional knowledge of engineering to be used. In this article, the mutual effect of form modifications and topology of the bracing system in a 9-story timber exoskeleton high-rise building regarding the governing wind load and seismic load is examined. What differentiates this study from former ones and in fact its main purpose is introducing an innovative approach towards structural topology optimization using parametric design. In this innovative approach, the possibility of moving for each central node of bracing systems in defined ranges independently and the possibility of the existence or absence of each bracing member is provided. This parametric model will enable architects to optimize the topology of the structural elements which are part of their architectural design by themselves. The CMA-ES-algorithm-based optimization is done to minimize both total mass of structure per unit area and the horizontal displacement of the top floor. For modeling, optimizing cross-sections and structural analysis, Grasshopper and its plug-in called Karamba are utilized.
keywords	Topology optimization; Form finding; Parametric design; Timber tall buildings; Exoskeleton structures
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cdrf2021_330
id	cdrf2021_330
authors	Felix Amtsberg, Caitlin Mueller, and Felix Raspall
year	2021
title	Di-terial – Matching Digital Fabrication and Natural Grown Resources for the Development of Resource Efficient Structures
source	Proceedings of the 2021 DigitalFUTURES The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021)
doi	https://doi.org/https://doi.org/10.1007/978-981-16-5983-6_30
summary	The research presented in this paper focusses on the concept of “Diterial” which aims to merge digital design and fabrication technology with natural materials such as bamboo poles and raw timber. It proposes a digital workflow that uses sensing techniques to gain individual material information of natural, unprocessed construction resources and identify their individual strengths and characteristics and therefore its potential in load-carrying structures. This information is then used to develop bespoke designs and fabrication concepts, bridging the gap between unprocessed material and automated fabrication setups. Two case studies, developed to prove this concept, are described and compared. Both cases focused on the development of spatial structures using node-bar combinations of local resources.
series	cdrf
email
last changed	2022/09/29 07:53

_id	ascaad2021_039
id	ascaad2021_039
authors	Heydari, Maziar; Mohammadjavad Mahdavinejad, Khosro Daneshjoo
year	2021
title	Utilizing Behavioral Agent-Based Modeling in an Automated Integrative Design Process
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 32-42
summary	Developing shift in architectural practice from previously exercised to late computational methods struggles to harmonize the concentration and consolidation between physical and humane aspects of a project or even the very thinking mechanism itself. Integrating Design workflow with the emerging simulation environment of agent-based modeling (ABM) in the complex architectural process can help us formulate a non-linear method. In this method, various complex design aspects such as humans' socio-behavioral attributes and structural complexities can be utilized to render an evolving design profile. Employing ABM in the design process enables us to evaluate complex problems using node-based tools to generate complicated simulation and exercise an adequate approach.
series	ASCAAD
email
last changed	2021/08/09 13:11

_id	acadia21_354
id	acadia21_354
authors	Liu, Yulun; Lu, Yao; Akbarzadeh, Masoud
year	2021
title	Kerf Bending and Zipper-in Spatial Timber Tectonics
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 354-361.
doi	https://doi.org/10.52842/conf.acadia.2021.354
summary	Space frames are widely used in spatial constructions as they are lightweight, rigid, and efficient. However, when it comes to the complex and irregular spaces frames, they can be difficult to fabricate because of the uniqueness of the nodes and bars. This paper presents a novel timber space frame system that can be easily manufactured using 3-axis CNC machines, and therefore increase the ease of the design and construction of complex space frames. The form-finding of the space frame is achieved with the help of polyhedral graphic statics (PGS), and resulted form has inherent planarity which can be harnessed in the materialization of the structure. Inspired by the traditional wood tectonics kerf bending and zippers are applied when devising the connection details. The design approach and computational process of this system are described, and a test fabrication of a single node is made via 3-axis CNC milling and both physically and numerically tested. The structural performance shows its potentials for applications in large-scale spatial structures.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	caadria2021_250
id	caadria2021_250
authors	Aghaei Meibodi, Mania, Odaglia, Pietro and Dillenburger, Benjamin
year	2021
title	Min-Max: Reusable 3D printed formwork for thin-shell concrete structures - Reusable 3D printed formwork for thin-shell concrete structures
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 743-752
doi	https://doi.org/10.52842/conf.caadria.2021.1.743
summary	This paper presents an approach for reusable formwork for thin-shell, double-sided highly detailed surfaces based on binder jet 3D printing technology. Using binder jetting for reusable formwork outperforms the milled and 3D printed thermoplastic formwork in terms of speed and cost of fabrication, precision, and structural strength against deformation. The research further investigated the synergy of binder jetting sandstone formwork with glass-fiber reinforced concrete (GFRC) to fabricate lightweight, durable, and highly detailed facade elements.We could demonstrate the feasibility of this approach by fabricating a minimal surface structure assembled from 32 glass-fiber reinforced concrete elements, cast with 4 individual formwork elements, each of them reused 8 times. By showing that 3D printed (3DP) formwork cannot only be used once but also for small series production we increase the field of economic application of 3D printed formwork. The presented fabrication method of formwork based on additive manufacturing opens the door to more individualized, freeform architecture.
keywords	Binder Jet 3D Printing; 3D Printed Formwork; Reusable Formwork; Minimal Surface; GFRC (GRC)
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2021_203
id	ecaade2021_203
authors	Arora, Hardik, Bielski, Jessica, Eisenstadt, Viktor, Langenhan, Christoph, Ziegler, Christoph, Althoff, Klaus-Dieter and Dengel, Andreas
year	2021
title	Consistency Checker - An automatic constraint-based evaluator for housing spatial configurations
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 351-358
doi	https://doi.org/10.52842/conf.ecaade.2021.2.351
summary	The gradual rise of artificial intelligence (AI) and its increasing visibility among many research disciplines affected Computer-Aided Architectural Design (CAAD). Architectural deep learning (DL) approaches are being developed and published on a regular basis, such as retrieval (Sharma et al. 2017) or design style manipulation (Newton 2019; Silvestre et al. 2016). However, there seems to be no method to evaluate highly constrained spatial configurations for specific architectural domains (such as housing or office buildings) based on basic architectural principles and everyday practices. This paper introduces an automatic constraint-based consistency checker to evaluate the coherency of semantic spatial configurations of housing construction using a small set of design principles to evaluate our DL approaches. The consistency checker informs about the overall performance of a spatial configuration followed by whether it is open/closed and the constraints it didn't satisfy. This paper deals with the relation of spaces processed as mathematically formalized graphs contrary to existing model checking software like Solibri.
keywords	model checking, building information modeling, deep learning, data quality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2021_233
id	caadria2021_233
authors	Ascoli, RaphaÃ«l
year	2021
title	Augmenting computational design agency in emerging economies
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 2, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 639-648
doi	https://doi.org/10.52842/conf.caadria.2021.2.639
summary	This /practice-based design research/ investigates the possibility of computational design to increase agency and impact in emerging economies through real-world projects. By cultivating a new kind of relationship to issues in development and local untapped resources, they inspire for more public engagement and resource-based conversations within a spatial framework. The topics that were addressed in this research are the democratization of data and affordability of construction. These two on-going early-stage initiatives have used computational design tools at specific areas in the projects development, therefore optimizing the parts where low-tech tools werent sufficient. This demand driven design process explores ways in which different levels of technology can augment each other.
keywords	space; resource; housing; myanmar; optimization
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cdrf2021_359
id	cdrf2021_359
authors	Ayoub Lharchi, Mette Ramsgaard Thomsen, and Martin Tamke
year	2021
title	Joint Descriptive Modeling (JDM) for Assembly-Aware Timber Structure Design
source	Proceedings of the 2021 DigitalFUTURES The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021)
doi	https://doi.org/https://doi.org/10.1007/978-981-16-5983-6_33
summary	Joints design is an essential step in the process of designing timber structures. Complex architectural topologies require thorough planning and scheduling, as it is necessary to consider numerous factors such as structural stability, fabrication capabilities, and ease of assembly. This paper introduces a novel approach to timber joints design that embed both fabrication and assembly considerations within the same model to avoid mistakes that might cause delays and further expenses. We developed a workflow that allows us to identify the fundamental data to describe a given joint geometry, machine-independent fabrication procedures, and the assembly sequence. Based on this, we introduce a comprehensive descriptive language called Joint Descriptive Model (JDM) that leverages industry standards to convert a joint into a usable output for both fabrication and assembly simulations. Finally, we suggest a seed of a joint’s library with some common joints.
series	cdrf
email
last changed	2022/09/29 07:53

_id	ecaade2021_263
id	ecaade2021_263
authors	Azadi, Shervin and Nourian, Pirouz
year	2021
title	GoDesign - A modular generative design framework for mass-customization and optimization in architectural design
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 1, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 285-294
doi	https://doi.org/10.52842/conf.ecaade.2021.1.285
summary	We present a modular generative design framework for design processes in the built environment that provides for the unification of participatory design and optimization to achieve mass-customization and evidence-based design. The paper articulates this framework mathematically as three meta procedures framing the typical design problems as multi-dimensional, multi-criteria, multi-actor, and multi-value decision-making problems: 1) space-planning, 2) configuring, and 3) shaping; structured as to the abstraction hierarchy of the chain of decisions in design processes. These formulations allow for applying various problem-solving approaches ranging from mathematical derivation & artificial intelligence to gamified play & score mechanisms and grammatical exploration. The paper presents a general schema of the framework; elaborates on the mathematical formulation of its meta procedures; presents a spectrum of approaches for navigating solution spaces; discusses the specifics of spatial simulations for ex-ante evaluation of design alternatives. The ultimate contribution of this paper is laying the foundation of comprehensive Spatial Decision Support Systems (SDSS) for built environment design processes.
keywords	Generative Design; Spatial Configuration; Serious Gaming; Mass Customization; Decision Problems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cdrf2021_368
id	cdrf2021_368
authors	B. Bala Murali Kumar, Yun Chung Hsueh, Zhuoyang Xin, and Dan Luo
year	2021
title	Process and Evaluation of Automated Robotic Fabrication System for In-Situ Structure Confinement
source	Proceedings of the 2021 DigitalFUTURES The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021)
doi	https://doi.org/https://doi.org/10.1007/978-981-16-5983-6_34
summary	The additive manufacturing process is gaining momentum in the construction industry with the rapid progression of large-scale 3D printed technologies. An established method of increasing the structural performance of concrete is by wrapping it with Fibre Reinforced Polymer (FRP). This paper proposes a novel additive process to fabricate a FRP formwork by dynamic layer winding of the FRP fabric with epoxy resin paired with an industrial scale robotic arm. A range of prototypes were fabricated to explore and study the fabrication parameters. Based on the systemic exploration, the limitations, the scope, and the feasibility of the proposed additive manufacturing method is studied for large scale customisable structural formworks.
series	cdrf
email
last changed	2022/09/29 07:53

_id	caadria2021_291
id	caadria2021_291
authors	Bansal, Medha and Erdine, Elif
year	2021
title	Bio-Mineralisation And In-Situ Fabrication Of In-Dune Spaces: Case Study Of Thar Desert
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 493-502
doi	https://doi.org/10.52842/conf.caadria.2021.1.493
summary	Desertification has made large productive landscapes in the South-west Thar desert redundant, subjected people to migration and induced a constant influx of sand into the region (Singhvi and Amal, 2014). The abundance of sand creates an opportunity to adopt an existing technique, Bio-mineralisation, to develop a sand based composite material which, when treated with a construction binder like sodium alginate, can be used for engineering purposes. The paper sets a theoretical framework to develop a fabrication mechanism with microbial-grout injections and propose the development of in-dune/underground assembly of habitable spaces. Each of the sub-components of material system, fabrication mechanism and In-dune structures are detailed, and evaluated to devise a hierarchy between them. Their interdependencies together inform design strategies, a phasing plan and global time scale for overall terrain transformation.
keywords	Bio-mineralisation; Bio-grouting; In-dune fabrication; Tool path algorithms; Micro-climate analysis
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2021_005
id	caadria2021_005
authors	Bedarf, Patrick, Martinez Schulte, Dinorah, Åženol, AyÃ§a, Jeoffroy, Etienne and Dillenburger, Benjamin
year	2021
title	Robotic 3D Printing of Mineral Foam for a Lightweight Composite Facade Shading Panel
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 603-612
doi	https://doi.org/10.52842/conf.caadria.2021.1.603
summary	This paper presents the design and fabrication of a lightweight composite facade shading panel using 3D printing (3DP) of mineral foams. Albeit their important role in industrial construction practice as insulators and lightweight materials, only little research has been conducted to use foams in 3DP. However, the recent development of highly porous mineral foams that are very suitable for extrusion printing opens a new chapter for development of geometrically complex lightweight building components with efficient formwork-free additive manufacturing processes. The work documented in this paper was based on preliminary material and fabrication development of a larger research endeavor and systematically explored designs for small interlocking foam modules. Furthermore, the robotic 3D Printing setup and subsequent processing parameters were tested in detail. Through extensive prototyping, the design space of a final demonstrator shading panel was mapped and refined. The design and fabrication process is documented and shows the potential of the novel material system in combination with fiber-reinforced ultra-high performance concrete (UHPC). The resulting composite shading panel highlights the benefits of using mineral foam 3DP to fabricate freeform stay-in-place formwork for lightweight facade applications. Furthermore, this paper discusses the challenges and limitations encountered during the project and gives a conclusive outlook for future research.
keywords	robotic 3d-printing; mineral foam; lightweight construction; concrete formwork; facade shading panel
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2021_329
id	caadria2021_329
authors	Breseghello, Luca, Sanin, Sandro and Naboni, Roberto
year	2021
title	Toolpath Simulation,Design and Manipulation in Robotic 3D Concrete Printing
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 623-632
doi	https://doi.org/10.52842/conf.caadria.2021.1.623
summary	Digital fabrication is blurring the boundaries between design, manufacturing and material effects. More and more experimental design processes involve an intertwined investigation of these aspects, especially when it comes to additive techniques such as 3D Concrete Printing (3DCP). Conventional digital tools present limitations in the description of an object, which neglects material, textural, and machinic information. In this paper, we exploit the control of extrusion-based 3D printing via programmed layered toolpath as a design method for enhancing the control of the manufactured architectural elements. The paper presents an experimental framework for design, analysis and fabrication with 3DCP, developing a system for materializing interdependencies between geometry, material, performance. This is applied to a series of architectural artefacts which demonstrate the advantages and possibilities opened by the introduced workflow, expanding the design process towards higher control on the objects buildability, structural integrity and aesthetic. manufacturing and material effects. More and more experimental design processes involve an intertwined investigation of these aspects, especially when it comes to additive techniques such as 3D Concrete Printing (3DCP). Conventional digital tools present limitations in the description of an object, which neglects material, textural, and machinic information. In this paper, we exploit the control of extrusion-based 3D printing via programmed layered toolpath as a design method for enhancing the control of the manufactured architectural elements. The paper presents an experimental framework for design, analysis and fabrication with 3DCP, developing a system for materializing interdependencies between geometry, material, performance. This is applied to a series of architectural artefacts which demonstrate the advantages and possibilities opened by the introduced workflow, expanding the design process towards higher control on the objects buildability, structural integrity and aesthetic."
keywords	3D Concrete Printing; Robotic Fabrication; Additive Manufacturing; Toolpath Simulation; Toolpath Manipulation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac202119101
id	ijac202119101
authors	Budig, Michael; Oliver Heckmann, Markus, Hudert, Amanda Qi Boon Ng, Zack Xuereb Conti, and Clement Jun Hao Lork
year	2021
title	Computational screening-LCA tools for early design stages
source	International Journal of Architectural Computing 2021, Vol. 19 - no. 1, 6–22
summary	Life Cycle Assessment (LCA) has been widely adopted to identify the Global Warming Potential (GWP) in the construction industry and determine its high environmental impact through Greenhouse Gas (GHG) emissions, energy and resource consumptions. The consideration of LCA in the early stages of design is becoming increasingly important as a means to avoid costly changes at later stages of the project. However, typical LCA-based tools demand very detailed information about structural and material systems and thus become too laborious for designers in the conceptual stages, where such specifications are still loosely defined. In response, this paper presents a workflow for LCA-based evaluation where the selection of the construction system and material is kept open to compare the impacts of alternative design variants. We achieve this through a strict division into support and infill systems and a simplified visualization of a schematic floor layout using a shoebox approach, inspired from the energy modelling domain. The shoeboxes in our case are repeatable modules within a schematic floor plan layout, whose enclosures are defined by parametric 2D surfaces representing total ratios of permanent supports versus infill components. Thus, the assembly of modular surface enclosures simplifies the LCA evaluation process by avoiding the need to accurately specify the physical properties of each building component across the floor plan. The presented workflow facilitates the selection of alternative structural systems and materials for their comparison, and outputs the Global Warming Potential (GWP) in the form of an intuitive visualization output. The workflow for simplified evaluation is illustrated through a case study that compares the GWP for selected combinations of material choice and construction systems.
keywords	Computational life cycle assessment tool, embodied carbon, parametric design, construction systems, global warming potential
series	journal
email
last changed	2021/06/03 23:29

_id	ascaad2021_069
id	ascaad2021_069
authors	Cheddadi, Aqil; Kensuke Hotta, Yasushi Ikeda
year	2021
title	Exploring the Self-Organizing Structure of the Moroccan Medina: A Simulation Model for Generating Urban Form
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 672-685
summary	This research explores the use of generative design and computational simulations in the exploration of urban compositions based on traditional urban forms from North Africa. Upon the examination of these urban settlements, we discuss the relationship between traditional urban form and generative urbanism theory. We investigate several factors that allow these self-generated urban tissues to be highly adaptive to social, spatial, and environmental change. Following this, we formulate guidelines to reinterpret some of the characteristics of these urban forms. Built on these features, the simulation seeks to explore the generation of abstract urban forms and their optimization. In this regard, this experiment utilizes 3D and parametric design tools (Rhinoceros 3D and Grasshopper) to define a generative urban simulation and optimization model. It explores the use of algorithmic design methodology in the definition and optimization of the generated urban form. For this purpose, grid-based operations with base modules are used in conjunction with introverted urban blocks. We employ evolutionary algorithms and Pareto front methodology to visualize and rank a multitude of optimized results that are evaluated using three different and conflicting design objectives: sun exposure, physical accessibility, and urban density. The results are ranked and analyzed by comparing the outcomes of these different objective functions. The result of this study shows that it is possible to allow a degree of diversification of a myriad of urban configurations with a generative form-finding algorithm while still maintaining a rather commendable adaptability to various design constraints in the case of high-density settings. In this research, it is anticipated that an algorithmic design model is a fitting contemporary solution that can simulate the philosophy of a design made without a designer and offer a wide range of objective-based spatial solutions. It sets the stage for a discussion about the relevance of reinterpreting traditional urban forms from north Africa by designing a generative model that allows for self-organization.
series	ASCAAD
email
last changed	2021/08/09 13:13

For more results click below: