Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 611

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2022_296
id	caadria2022_296
authors	Jahn, Gwyllim, Newnham, Cameron and van den Berg, Nick
year	2022
title	Augmented Reality for Construction From Steam-Bent Timber
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 191-200
doi	https://doi.org/10.52842/conf.caadria.2022.2.191
summary	Digital models viewed in augmented reality can serve as guides to form and assemble parts during construction and reduce the need to build temporary formwork or sub structures. However, static digital models are often inadequate for describing the behaviour of material that is dynamically formed over time, leading to breakages and difficulty following augmented reality guides during assembly. To address this issue, we propose a method for fast and approximate simulation of material behaviour using a goal-based physics solver, enabling the design and fabrication of steam bent timber parts using an adaptable system of sparse formwork. Through the design and construction of a pavilion from steam bent timber we demonstrate that approximate simulation of material behaviour is adequate for wide tolerance construction by hand and eye in augmented reality, avoiding part breakages and accumulative error.
keywords	Augmented Reality, Digital Fabrication, Generative Design, Material Simulation, SDG 9
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	caadria2022_361
id	caadria2022_361
authors	Lok, Leslie and Bae, Jiyoon
year	2022
title	Timber De-Standardized 2.0 : Mixed Reality Visualizations and User Interface for Processing Irregular Timber
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 121-130
doi	https://doi.org/10.52842/conf.caadria.2022.2.121
summary	Timber De-Standardized 2.0†is a mixed reality (MR) user interface (UI) that utilizes timber waste produced by manufacturing dimensional lumber, suggesting an expanded notion for "material usability‚ in timber construction. The expanded notion of designing with discarded logs not only requires new tools and technologies for cataloguing, structuring, and fabricating. It also relies on new methods and platforms for the visualization and design of these structures. As a†MR†UI,†Timber De-Standardized†enables professionals and non-professionals alike to seamlessly design with irregular logs and to create viable structural systems using an intuitive†MR†environment. In order to develop a†MR†environment with this level of competency, the research aims to finesse the visualization techniques in the immersive full-scale†3D†environment and to minimize the use of alternative 2D UI(s). The research methodology†focuses on†(1) cataloguing and extracting basic properties of various tree logs, (2)†refining mesh visualization for better user interaction, and†(3)†developing†the†MR†UI to increase user design agency with custom menu lists and operations.†This methodology will extend the usability of†MR†UI protocols to a broader audience while democratizing design and enabling the user as co-creator.
keywords	Irregular Tree Logs, Wood Construction, Augmented and Mixed Realities, Mixed Reality User Interface, Co-Creative Design, Digital representation and visualization, SDG 9, SDG 12, SDG 13
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	caadria2022_505
id	caadria2022_505
authors	Nanasca, James and Beebe, Aaron G.
year	2022
title	Dynamic Projection
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 39-48
doi	https://doi.org/10.52842/conf.caadria.2022.1.039
summary	Rarely are technologies of projection mapping (PM) and mixed reality (MR) used together with an architectural agenda. Dynamic Projection imagines the confluence of accessible PM and MR technologies and asks "How might we leverage the strengths of both technologies while obviating their weaknesses?‚ And then "How might this technology be of use in making architecture from within the Climate Movement?‚ First, we will examine the dormant potential of Projected MR by augmenting a physical model in an exhibition setting. The exhibition set-up deploys Unity and Vuforia to generate MR, and Mad Mapper to generate a projection mapped background space. Using this set-up reveals strengths in both technologies, which we can evaluate with a Cybernetically Enhanced Mixed Reality Framework. We can leverage this Projected MR as a suite of tools to make architecture a more active participant in the Climate Movement: for example, by augmenting buildings with statistics that could help reduce energy consumption or through the augmentation of the construction process, helping facilitate waste reduction through efficient construction. Our initial research is being expanded through development of a more versatile Projected MR platform with Dynamic Projection 02, in which we are utilizing better MR tools, more responsive PM tools, and an industrial robot to simulate various dynamic feedback systems. This expanded research design speculates on a 3-part exhibition that can respond with low latency via Projected MR controls during a public and private interactive experience.
keywords	Projection Mapping, Augmented Reality, Projected Augmented Reality, Cybernetics, Mixed Reality, Responsible Consumption and Production, Climate Action, SDG 12, SDG 13
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	caadria2022_387
id	caadria2022_387
authors	Robinson, Richard and Park, Hyoung-June
year	2022
title	Learning from Hale: An Educational Augmented Reality Application for an Indigenous Hawaiian Architecture
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 697-706
doi	https://doi.org/10.52842/conf.caadria.2022.1.697
summary	An educational Augmented Reality (AR) application with Head Mount Display (HMD) is developed for the revitalization of the Hales. The proposed application allows a user to have a dynamic learning experience of the Hale by 1) full immersion into an extended reality, 2) enabling the hands-on construction & assembly process with real-time feedback, and 3) visualizing context-specific information and concepts. Through this intact experience, tacit knowledge embedded in the Hawaiian Hale design is delivered. In this paper, the implementation of the proposed application is explained, and the usage of the application is also demonstrated.
keywords	Augmented Reality, Tacit Knowledge, Cultural Heritage, Hale, SDG 4
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	caadria2022_431
id	caadria2022_431
authors	Sun, Ke Nan, Lo, Tian Tian, Guo, Xiangmin and Wu, Jinxuan
year	2022
title	Digital Construction of Bamboo Architecture Based on Multi-Technology Cooperation: Constructing a New Parameterized Digital Construction Workflow of Bamboo Architecture From Traditional Bamboo Construction Technology
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 223-232
doi	https://doi.org/10.52842/conf.caadria.2022.2.223
summary	Limited by the non-standard nature of bamboo, bamboo has always been regarded as a traditional, restrictive, and time-consuming building material. Therefore, there is an urgent need for an enhanced parametric design system and digital construction workflow to upgrade the traditional bamboo construction process. In this paper, through the analysis of the bamboo pavilion "Diecui†Gallery" under the traditional construction method, five main factors restricting the development of bamboo architecture are obtained: difficult positioning of supporting structure, low efficiency of material selection and matching, the manual processing of materials, non-standard node and low utilization rate of non-standard waste materials. Then, through literature review, we proposed the technical means to improve these factors and put forward a multi-technology collaborative digital construction workflow. The workflow will comprise augmented reality, 3D scanning, robot-aided construction, 3D printing, and design rules. Moreover, by building parametric benches, we used augmented reality technology and new design rules to verify multi-technology collaborative fabrication workflow possibilities and effectiveness. This paper wants to explore a parametric design method based on bamboo material characteristics and multi-technology collaborative workflow, to improve the utilization rate of non-standard bamboo components in parametric design.
keywords	Bamboo Material, Multi-technology Collaboration, Parametric Design System, Augmented Reality, Digital Construction Method, SDG 11
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	ecaade2022_223
id	ecaade2022_223
authors	Tuzun Canadinc, Seda and Yan, Wei
year	2022
title	3D-Model-Based Augmented Reality for Enhancing Physical Architectural Models
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 495–504
doi	https://doi.org/10.52842/conf.ecaade.2022.2.495
summary	In the presentation of architectural projects, physical models are still commonly used as a powerful and effective representation for building design and construction. On the other hand, Augmented Reality (AR) promises a wide range of possibilities in visualizing and interacting with 3D physical models, enhancing the modeling process. To benefit both, we present a novel medium for architectural representation: a marker-less AR powered physical architectural model that employs dynamic digital features. With AR enhancement, physical capabilities of a model could be extended without sacrificing its tangibility. We developed a framework to investigate the potential uses of 3D-model- based AR registration method and its augmentation on physical architectural models. To explore and demonstrate integration of physical and virtual models in AR, we designed this framework providing physical and virtual model interaction: a user can manipulate the physical model parts or control the visibility and dynamics of the virtual parts in AR. The framework consists of a LEGO model and an AR application on a hand-held device which was developed for this framework. The AR application utilizes a marker-less AR registration method and employs a 3D-model-based AR registration. A LEGO model was proposed as the physical 3D model in this registration process and machine learning training using Vuforia was utilized for the AR application to recognize the LEGO model from any point of view to register the virtual models in AR. The AR application also employs a user interface that allows user interaction with the virtual parts augmented on the physical ones. The working application was tested over its registration, physical and virtual interactions. Overall, the adoption of AR and its combination with physical models, and 3D-model-based AR registration allow for many advantages, which are discussed in the paper.
keywords	Augmented Reality, AR, 3D-model based AR, Architectural Representation, Architectural Modeling
series	eCAADe
email
last changed	2024/04/22 07:10

_id	acadia22_694
id	acadia22_694
authors	Ashour,, Ziad; Yan, Wei
year	2022
title	BIMxAR: Building Information Modeling-Powered Augmented Reality
source	ACADIA 2022: Hybrids and Haecceities [Proceedings of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 694-703.
summary	In this study, we present an AR system prototype (BIMxAR), its new and accurate building-scale registration method (DL-3S-BIM) for aligning BIM and physical buildings, and its novel visualization features that facilitate the comprehension of building construction systems, materials configuration, and 3D section views of complex structures through the integration of AR, Building Information Modeling (BIM), and physical buildings.
series	ACADIA
type	paper
email
last changed	2024/02/06 14:04

_id	ecaade2022_251
id	ecaade2022_251
authors	Awan, Abeeha, Lombardi, Davide, Ruffino, Paolo and Agkathidis, Asterios
year	2022
title	Efficacy of Gamification on Introductory Architectural Education: a literature review
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 553–564
doi	https://doi.org/10.52842/conf.ecaade.2022.2.553
summary	Due to their recent popularity and success in fields such as engineering and business, gamification and by extension game design principles demonstrate the ability to teach complex, multi-disciplinary skills in an engaging, entertaining, and effective way. Architectural education especially introductory architectural education is a foundational and fundamental part of a budding architecture student’s career and oftentimes requires the understanding of dynamic systems, spatial reasoning, and experiential learning. The paper posits that gamification and game design principles can utilize certain components such as augmented reality, narrative design, and fun in order to create tools, gamify existing curriculum, and increase retention, engagement, and mastery of the difficult high-tech skillsets required of introductory architects. The paper focuses on reviewing and systematically analyzing research on gamification in education. In particular, it focuses on systematically reviewing and analyzing data from multiple relevant case studies chosen based on the application of technology such as augmented reality, the integration of game design, and the feasibility of gamification in educational environments. This data is examined based on feasibility, accessibility, and effects on information retention and the findings are outlined in a comparative table of methods, tools, and technologies organized based on their suitability. Ultimately, the paper aims to establish a framework for gamifying introductory modules in architectural education and hopes to create a future architectural augmented reality game meant to utilize gamification to help new architectural students.
keywords	Gamification, Game Design, Architectural Education, Educational Games, Retention, Learning
series	eCAADe
email
last changed	2024/04/22 07:10

_id	ascaad2022_043
id	ascaad2022_043
authors	Awan, Abeeha; Prokop, Simon; Vele, Jiri; Dounas, Theodor; Lombardi, Davide; Agkathidis, Asterios; Kurilla, Lukas
year	2022
title	Qualitative Knowledge Graph for the Evaluation of Metaverse(s) - Is the Metaverse Hype or a Promising New Field for Architects?
source	Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 99-116
summary	With the advancement of augmented and virtual reality technologies both in scale as well as accessibility, the Metaverse (Stephenson, 1992, Hughes, 2022) has emerged as a new digital space with potential for the application of architectural creativity and design. With blockchain integration, the concept of the Metaverse shows promise in creating a “decentralised” space for design and creativity with rewards for its participants. As a platform that incorporates these technological components, does the Metaverse have utility for architectural design? Is there something truly novel in what the Metaverse brings to architectural computing, and architectural design? The paper constructs a qualitative knowledge graph that can be used for the evaluation of various kinds of Metaverses in and for architectural design. We use Design Science Research methods to develop the knowledge graph and its evaluative capacity, stemming from our experience with two Metaverses, Decentraland and Cryptovoxels. The paper concludes with a discussion of knowledge and practice gaps that are evident, framing the opportunities that architects might have in the future in terms of developing Metaverse(s).
series	ASCAAD
email
last changed	2024/02/16 13:24

_id	ecaade2022_360
id	ecaade2022_360
authors	Azambuja Varela, Pedro, Lacroix, Igor, Güzelci, Orkan Zeynel and Sousa, José Pedro
year	2022
title	Democratizing Stereotomic Construction through AR Technologies - A reusable mold methodology to the production of customized voussoirs using HoloLens
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 225–232
doi	https://doi.org/10.52842/conf.ecaade.2022.1.225
summary	Mass customizing of building components allows new conditions to explore aesthetic and sustainability in architecture. However, such possibilities tend to require the use of expensive and heavy digital fabrication machinery, which is seldomly available in most regions on the planet. In this context, this paper presents a research in progress that explores Augmented Reality (AR) to support craft production of customized stereotomic components. As a portable technology, the work examines the potential of AR to materialize design solutions that are geometrically complex and variable. Considering the current research on augmented fabrication processes, this work contributes to producing variable building components for stereotomic construction with a focus on earth-based materials. Extending the findings of a recently completed PhD thesis, the work replaces the use of a robot with the HoloLens glasses and Fologram application to produce low- cost and reusable molds. This augmented fabrication setup allows the human control of the production of variable molds, ready for casting and assembly of stereotomic components. This work addresses several of the NEB and UN SDGs goals.
keywords	Stereotomy, Augmented Reality, Augmented Fabrication, Customized Production, New European Bauhuas
series	eCAADe
email
last changed	2024/04/22 07:10

_id	caadria2022_391
id	caadria2022_391
authors	Burden, Alan, Donovan, Jared, Caldwell, Glenda and Belek Fialho Teixeira, Muge
year	2022
title	Hybrid Digital Crafts With Collaborative Robotics
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 21-30
doi	https://doi.org/10.52842/conf.caadria.2022.2.021
summary	Bespoke manufacturers that fabricate for architecture and design rely on skill artisans such as patternmakers to remain profitable. Collaborative robotics and augmented reality (AR) offer new technological options and approaches that integrate with existing artisan techniques. Can these technologies provide productive and practical assistance to skilled handcraft artisans? This research presents an original approach to robotic fabrication using AR robot control, and artisan techniques to fabricate an original design. The method includes documenting artisan ethnography, designing a custom cutting end effector and an AR control interface, utilising the capabilities of the robot fabricating system. The research outcome is a hybrid digital craft approach to collaborative robotic patternmaking and handcrafting. The fabrication system reduced the amount of time and physical exertion of designing and cutting out patterns from various materials. This demonstrates that robotic tools can expand rather than replace the capability of existing artisan occupations, helping to strengthen resilience in local industries and promote new innovations.
keywords	Collaborative robotic fabrication, hybrid digital craft, artisan manufacturing, augmented reality, SDG9.
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	caadria2022_258
id	caadria2022_258
authors	Chen, Hao, Fukuda, Tomohiro and Yabuki, Nobuyoshi
year	2022
title	Developing an Augmented Reality System with Real-Time Reflection for Landscape Design Visualization, Using Real-Time Ray Tracing Technique
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 89-98
doi	https://doi.org/10.52842/conf.caadria.2022.1.089
summary	In landscape design, visualization of a new design on the site with clients can greatly improve communication efficiency and reduce communication costs. The use of augmented reality (AR) allows the projection of design models into the real environment, but the relationship between the models and the physical environment, such as reflections, which are often thoughtfully considered in waterfront landscape design, is difficult to express in existing AR systems. The aim of this study is to accurately render and express the reflections of virtual models in the physical environment in an AR system. Different from traditional rasterized rendering, this study used physically correct ray-tracing algorithms for reflection rendering calculations. Using a smartphone and a computer, we first constructed a basic AR system using a game engine and then performed ray-tracing computations using a shader kernel in the game engine. Finally, we combined the rendering results of reflections with the video stream from a smartphone camera to achieve the reflection effect of a virtual model in a physical environment. Both designers and clients could review the design with a realistic reflection on an actual water surface and discuss design decisions through this system.
keywords	Augmented reality (AR), reflection, landscape design, interactive visualization, real-time rendering, planar reflection, real-time ray tracing, SDG 11
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	ecaade2022_368
id	ecaade2022_368
authors	Das, Avishek, Brunsgaard, Camilla and Madsen, Claus Brondgaard
year	2022
title	Understanding the AR-VR Based Architectural Design Workflow among Selected Danish Architecture Practices
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 381–388
doi	https://doi.org/10.52842/conf.ecaade.2022.1.381
summary	Virtual reality (VR) and augmented reality (AR) have been proposed to be additional architectural design mediums for at least 25 years (Dagit, 1993). Despite rapid technical and technological development, it has not been adopted into architectural design practices as compared to academia and research. Surveys from the American Institute of Architects (AIA) and Royal Institutes of British Architects (RIBA) demonstrate the state of architectural practices; 72% of architects and 65% of architects respectively are not using any kind of virtual, augmented, or mixed reality in their practices(RIBA and Microsoft, 2018; Hampson, 2020). In this paper, the authors investigate the state of practices, issues, challenges, and opportunities of the utilization of virtual, augmented, and mixed realities in six architectural practices in the Danish context. Three of the practices are large architectural practices, one medium-sized practice specializing in institutional, healthcare and cultural architecture, and one firm designing private family houses, kindergartens, daycares and places for people with disability and, one experimental design studio. All these practices have used VR/AR in their projects to various degrees. In recent years Danish architectural practices have been involved in various VR/AR-based exhibitions, demonstrations, and tool developments to promote the usage of the same in design practice. Through a set of qualitative interviews with personnel from key architectural practices, the authors would like to demonstrate the present state of practices. The investigation explores the usage of VR and AR in Danish architecture practices by identifying challenges and opportunities regarding skill levels, architectural typology, use cases, toolchains, and workflow and shows similarities and differences between traditional and VR-based design processes. The main findings show how VR/AR-based visualization helps architects to perceive spatiality and also ushers creativity through immersion and overlays.
keywords	Virtual Reality, Augmented Reality, Architectural Design Practice, Denmark
series	eCAADe
email
last changed	2024/04/22 07:10

_id	caadria2022_175
id	caadria2022_175
authors	Farr, Marcus
year	2022
title	Bio-Synthetic Assemblages: Computational Assembly of Synthetic Bio-Sand Units Made From Dune Sand
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 293-302
doi	https://doi.org/10.52842/conf.caadria.2022.2.293
summary	Biomineralization is the process by which living organisms produce minerals to harden or stiffen exoskeletons and existing tissues. Mineralization is a widespread phenomenon among all taxonomic animal kingdoms. The material used in this project attempts to replicate the process of hardening and mineralizing dune sand found in the Sahara and Arabian deserts. This material is found in vast quantities but thought to be of little use in modern construction. The new bio-synthetic material used in this study is paired with the process of augmented construction and computational placement of tectonic units. The paper overlays a broad question of how organizational systems might integrate architecturally with regionally appropriate bio-material composed of dune sand and, more specifically, how this material process creates a consistent, viable architectural outcome with dune sand as a primary ingredient for architectural material. As the material agenda reaches maturity, we ask how the production of this bio-material can be combined with computation to articulate consistent architectural outcomes within a desert-specific environment. The role of this computational and material process adds to the current dialogue of designing in extreme environments and aligns with the UN Sustainable Development Goals for sustainable communities, responsible consumption and production, climate action, and life living on land.
keywords	Performance-based design, Bio-material, Computational design, Innovative material use, Augmented Construction, SDG 11, SDG 12, SDG 13, SDG 15
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	acadia23_v2_340
id	acadia23_v2_340
authors	Huang, Lee-Su; Spaw, Gregory
year	2023
title	Augmented Reality Assisted Robotic: Tube Bending
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 2: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-9-8]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 340-349.
summary	The intent of this research is to study potential improvements and optimizations in the context of robotic fabrication paired with Augmented Reality (AR), leveraging the technology in the fabrication of the individual part, as well as guiding the larger assembly process. AR applications within the Architecture, Engineering, and Construction (AEC) industry have seen constant research and development as designers, fabricators, and contractors seek methods to reduce errors, minimize waste, and optimize efficiency to lower costs (Chi, Kang, and Wang 2013). Recent advancements have made the technology very accessible and feasible for use in the field, as demonstrated by seminal projects such as the Steampunk Pavilion in Tallinn, Estonia (Jahn, Newnham, and Berg 2022). These types of projects typically improve manual craft processes. They often provide projective guidelines, and make possible complex geometries that would otherwise be painstakingly slow to complete and require decades of artisanal experience (Jahn et al. 2019). Building upon a previously developed robotic tube bending workflow, our research implements a custom AR interface to streamline the bending process for multiple, large, complex parts with many bends, providing a pre-visualization of the expected fabrication process for safety and part-verification purposes. We demonstrate the utility of this AR overlay in the part fabrication setting and in an inadvertent, human-robot, collaborative process when parts push the fabrication method past its limits. The AR technology is also used to facilitate the assembly process of a spatial installation exploring a unique aesthetic with subtle bends, loops, knots, bundles, and weaves utilizing a rigid tube material.
series	ACADIA
type	paper
email
last changed	2024/04/17 13:59

_id	acadia22_684
id	acadia22_684
authors	Jahn, Gwyllim; Newnham, Cameron; van den Berg, Nick
year	2022
title	Depth Camera Feedback for Guided Fabrication in Augmented Reality
source	ACADIA 2022: Hybrids and Haecceities [Proceedings of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 684-693.
summary	To address this issue, we propose a method for guided fabrication in augmented reality using real time comparisons between depth scans of as built conditions and target conditions defined by design models. Through the design and fabrication of a small proof of concept prototype from paper strips, we demonstrate that guided fabrication is adequate for high speed, approximate and ad-hoc fabrication of complex surface geometries without the need for extensive rationalization for fabrication constraints or explicit documentation of parts.
series	ACADIA
type	paper
email
last changed	2024/02/06 14:04

_id	caadria2022_179
id	caadria2022_179
authors	Kikuchi, Naoki, Fukuda, Tomohiro and Yabuki, Nobuyoshi
year	2022
title	How a Flooded City Can Be Visualized from Both the Air and the Ground with the City Digital Twin Approach, System Integration of Flood Simulation and Augmented Reality with Drones
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 607-616
doi	https://doi.org/10.52842/conf.caadria.2022.2.607
summary	City digital twins are becoming increasingly important for the sustainable development of cities, and augmented reality (AR) has been attracting attention as a tool for visualizing city digital twins. In addition, from the perspective of SDG 11, it is essential to manage flood risk in urban spaces. However, there are no case studies that present a bird‚s-eye view of a simulated city. Visualizing the state of a flooded city during a disaster is one potential use case. From the perspective of information graphics, people want to understand urban data at the micro and macro levels. This study proposes a city-digital-twin approach for visualizing a simulated city using a large-scale AR and drone integration method that does not require a specific software development kit (SDK). This system can visualize the state of a city flooded by a disaster from both a bird‚s-eye view of the city at several tens of metres above it and from a first-person perspective of the user‚s area of activity. The applicability of the system is demonstrated through verification and case studies.
keywords	virtual and augmented realities, city digital twin, occlusion handling, flood visualization, web-based augmented reality (web AR), SDG 11
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	sigradi2023_369
id	sigradi2023_369
authors	Lima, Micaele, Aguiar, Beatriz Natália, Romcy, Neliza, Lima, Mariana and Cardoso, Daniel
year	2023
title	Systematization of Scientific Production of Extended Reality in Teaching and Design Process in Architecture and Urbanism
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1397–1408
summary	Extended Reality (XR) technologies have the potential to help and improve the teaching and design process in Architecture and Urbanism, as they offer different ways of perceiving and representing space and various functionalities. Therefore, it is important to systematize scientific production in this area. This research aims to identify and analyze the main applications of XR in teaching and in the design process in Architecture and Urbanism, as well as its benefits and limitations. A systematic literature review of publications on CumInCAD and SBTIC, from 2015 to 2022, was carried out. The results show the growing emphasis of XR as a medium that offers benefits both for teaching and design practice. However, there are still limitations to be overcome to make XR more inclusive. As a contribution, a greater understanding of how XR has been applied in teaching is provided along with a reflection on its impact on the means of representation in the design process.
keywords	Virtual reality, Augmented reality, Extended reality, Project Teaching, Architectural Project.
series	SIGraDi
email
last changed	2024/03/08 14:08

_id	caadria2022_349
id	caadria2022_349
authors	Lopez Rodriguez, Alvaro, Jaramillo Pazmino, Pablo Isaac and Pantic, Igor
year	2022
title	Augmented Active-Bending Formwork for Concrete, A Manufacturing Technique for Accessible Local Construction of Structural Systems
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 181-190
doi	https://doi.org/10.52842/conf.caadria.2022.2.181
summary	This research introduces Augmented Reality (AR) for manufacturing concrete structures through an open platform for autonomous construction. The study was developed under the following scopes: computational algorithms for bending simulations, materiality tests, system implementation, and a set of Augmented Reality (AR) tools. AR devices offer a technological tool that allows for a self-built environment through holographic guidance, allowing the untrained workforce to participate in the process. This technology can help users select the system to construct through an Open-Source platform, reducing the gap between complex computational geometries and construction processes. The research aims to investigate a building system that could benefit the UN Objectives SDG 10 by increasing the access to technology in undeveloped communities, SDG 11 and SDG 12 by promoting a self-sustainable method of construction based on local resources and material efficiency. In conjunction with the development of the AR Platform and augmented manufacturing, a 1:1 prototype was built in Quito, Ecuador, with the help of seven people with no previous knowledge of digital tools or construction. Presenting a novel, fast, and affordable concrete formwork connected with AR assisted assembly methods that facilitate access to more efficient and advanced building technology.
keywords	Mixed Reality, Distributed Manufacturing, Online Platforms, Affordability, Local Communities, SDG 10, SDG 11, SDG 12
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	ecaade2022_302
id	ecaade2022_302
authors	Lu, Xin, Meng, Zeyuan, Rodriguez, Alvaro Lopez and Pantic, Igor
year	2022
title	Reusable Augmented Concrete Casting System - Accessible method for formwork manufacturing through holographic guidance
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 371–380
doi	https://doi.org/10.52842/conf.ecaade.2022.1.371
summary	Reinforced concrete has been one of the essential materials for modern architecture for the last hundred years. Its use is entirely global, having been adopted by all cultures and styles since its invention in the late 19th century. Although its value is excellent due to its low cost, durability and adaptability, its environmental impact is significant, being, in fact, one of the most polluting industries in the world (Babor et al. 2009). This experimental project will research a more sustainable use of concrete, exploring a new form of reusable concrete formwork that will ideally reduce the CO2 footprint by removing wood waste in the casting process and replacing it with adaptable metal components. The modular part-based system for the concrete casting also attempts to simplify one of the current complexities for concrete construction, the Skilled-Labour shortage. (Yusoff et al. 2021). To mitigate this problem, the project also proposes using an Augmented Assembly logic for the casting parts to guide the ensemble and dismantle the formwork through an optimised algorithmic logic. The use of Augmented Reality as a replacement for traditional paper instructions will facilitate access to more workers to this construction art and potentially improve access to optimised use of concrete in developing communities with restricted building technological resources.
keywords	Mixed Reality, Distributed Manufacturing, Augmented Manufacturing, Sustainability, Computational Design, Concrete Casting
series	eCAADe
email
last changed	2024/04/22 07:10

For more results click below: