Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 736

Reformat results as: short short into frame detailed detailed into frame

_id	8869
authors	Ataman, Osman
year	2002
title	Historical Analysis of Building - (Re)Construction in Olivette Park, USA
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 63-66
summary	From 1959 to 1990, East St. Louis, Illinois deteriorated from an “All-American City” to a national symbol of urban blight. Located on the Mississippi River, the East St. Louis of today faces severe economic, social, and environmental problems. Nearly onequarter of the city’s work force is unemployed and about 40 percent of families are living below the poverty level. But East St. Louis was not always a distressed community. With strong ties to St. Louis and the surrounding region, East St. Louis onceflourished as the country’s second busiest railroad hub. Powerful economic and socio-political forces, as well as unfortunate historical circumstance, propelled the city into a downward spiral that drastically decreased the quality of life in East St. Louis. This paper presents the digital re-construction of the buildings and the analyses of the historical aspects of the housing construction and types in this area. Furthermore, it reports the survey and assessment of the quality of building stocks based on therevitalization plan that will provide some guidelines and suggestions for improvement, stability, and future needs.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	1959
id	1959
authors	Heylighen, Ann; Martin, W Mike; Cavallin, Humberto
year	2004
title	FROM REPOSITORY TO RESOURCE -- EXCHANGING STORIES OF AND FOR ARCHITECTURAL PRACTICE
source	Journal of Design Research, Volume 4, Issue 1, 2004 [ISSN 1569-1551]
summary	Central to Case-Based Reasoning (CBR) is the claim that knowledge in human memory takes the form of cases, i.e. interpreted representations of concrete experiences. The intimate relationship between knowledge and experience in design has inspired CBR researchers to develop various Case-Based Design tools, which try to support architects (and designers in general) in capitalizing on previous design experience. Typically, these tools is built around a case base, an indexed collection of concrete cases labeled by a set of characteristic features. In general, cases document buildings, i.e. design products. By contrast, Building Stories has chosen to complement product data by stories about the process that generated the product. Previous papers have documented and illustrated the ideas underlying Building Stories and situated the methodology with regard to other case study approaches. The present paper focuses on establishing the growing repository of building stories into a valuable resource of and for the profession.
series	other
type	normal paper
email
more	http://jdr.tudelft.nl/articles/issue2004.01/Art3.html
last changed	2005/01/26 22:50

_id	cf2017_682
id	cf2017_682
authors	Rocha, Joao
year	2017
title	Design and Architecture for the Dawn of the Personal Computer: The Pioneer Vision of Adriano Olivetti
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, pp. 682-701.
summary	In 1952 the Italian Olivetti Company opened a study laboratory on electronic calculators in New Canaan, USA; in 1955 it created an electronic research laboratory in Pisa and two years later, co-founded a company to produce electronic conductors. In 1959 it presented ELEA 9003 and in 1965 the P101, respectively the first full transistorized computer and the first desktop computer. This paper aims to investigate how the Olivetti Company accomplished in such a brief period of time a pioneer vision in the field of computing. By one hand it seeks to highlight the forerunner idea of Adriano Olivetti (1901-1960) for an integrated awareness of what computing could become and on the other hand, how that wakefulness fostered an innovative agenda among architects, designers, filmmakers and scientists for the invention of the computer as an artifact expression of an epoch. This successful endeavor anticipated what would become the concept of personal computing. Moreover the paper underlines how the early commercial development of Olivetti and IBM computing flourished in the context of the Universal Exhibitions of Brussels and New York.
keywords	Olivetti, Computing, Architecture, Mario Tchou, Ettore Sottsass, IBM
series	CAAD Futures
email
last changed	2017/12/01 14:38

_id	30c9
authors	Tilley, A. and Henry Dreyfuss Associates
year	1993
title	The Measure of Man and Woman: Human Factors in Design
source	Whitney Library of Design, New York
summary	To work successfully, designers must understand the various body shapes and physical abilities of the population for which they design. The Measure of Man and Woman is an updated and expanded version of the landmark human factors book first published in 1959. It brings together a wealth of crucial information to help designers create products and environments that better accommodate human needs.
series	other
last changed	2003/04/23 15:14

_id	a58d
authors	Cicognani, Anna
year	1997
title	On the linguistic nature of Cyberspace and Virtual Communities
source	CM Special Journal Issue. Edited by Dave Snowdon, Nottingham: Submitted
summary	This paper argues for a linguistic explanation of the nature of Virtual Communities. Virtual Communities develop and grow in electronic space, or 'cyberspace'. Authors such as Benedikt Meyrowitz and Mitchell have theorised about the nature of electronic space whilst Lefebvre, Popper, Hakim Bey (aka Lamborn Wilson) and Kuhn have theorised more generally about the nature of space. Extending this tradition and the works of these authors, this paper presents a language based perspective on the nature of electronic spaces. Behaviour in cyberspace is based on and regulated by hardware, software tools and interfaces. A definition of electronic space cannot be given beyond its linguistic characteristics, which underlie and sustain it. The author believes that the more users and developers understand the relationship between language and cyberspace, the more they will be able to use specific metaphors for dwelling and inhabiting it. In particular, MUDs/MOOs and the Web are interesting places for testing and observing social behaviours and dynamics.
series	journal paper
email
last changed	2003/04/23 15:50

_id	sigradi2020_953
id	sigradi2020_953
authors	Abdallah, Yomna K.; Estevez, Alberto T.
year	2020
title	Methodology of Implementing Transformative Bioactive Hybrids in Built Environment to Achieve Sustainability
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 953-961
summary	Discrete responsive systems lack functional autonomous transformation, in response to environmental conditions and users' demands; due to shortage in direct integration of biological intelligence. Bioactive hybrids are sufficient solutions as they perform independente self-replication, differentiation of cellular structure, active metabolism, spatial propagation, adaptation, transformation, and morphogenesis. In this paper, a methodology is proposed for the design, fabrication and implementation of these hybrids in the built environment; highlighting their sustainability potentials, by merging synthetic biology, bioengineering and bioprinting, to achieve multiscale active responsiveness. The current work is part of research in biosynthesizing fibroblasts as transformative material in architectural sustainability.
keywords	Transformative hybrids, Biodigital, Bioprinting, Robotic materials, Bioengineered systems
series	SIGraDi
email
last changed	2021/07/16 11:53

_id	e322
id	e322
authors	Achten, H.H., Dorst, K., Stappers, P.J. and de Vries, B.
year	2005
title	A DECADE OF DESIGN RESEARCH IN THE NETHERLANDS
source	Achten, H.H., Dorst, K. Stappers, P.J. and de Vries, B. (eds.) Design Research in the Netherlands 2005, i-vii
series	book
type	normal paper
email
more	http://www.designresearch.nl/PDF/DRN2005_AchtenDorstStapperDeVries_Introduction.pdf
last changed	2005/10/12 15:52

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
doi	https://doi.org/10.52842/conf.acadia.2021.530
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ascaad2016_059
id	ascaad2016_059
authors	Admed, Mohammad H.K.
year	2016
title	Towards Developing BIM Curriculum in Higher Education in Egypt
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 589-598
summary	The paper surveys and discusses the current state of teaching BIM in departments of architecture in Egypt. It also connects it to the increasing professional market demand for technologically qualified architects. In specific, the paper explores the reasons behind the fact that the local BIM curriculum is lagging behind its international counterpart. It also explores the need to utilise BIM software capabilities. A further comparative survey is carried out between local case studies and international cases through identifying several stages of BIM implementation in both teaching and design. The advantages and disadvantages of the current method of teaching are explored in an effort to improve performance of BIM curriculum.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	sigradi2004_349
id	sigradi2004_349
authors	Adriana Simeone; Roberto Segre; José Ripper Kós
year	2004
title	O processo de desenvolvimento da ferramenta cidade interativa [The Developmental Process of an Interactive City Tool]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	This paper exposes site .Cidade Interativa. development process, based on: a reflection about importance of users. points of view.s incorporation for space remodelling; a study about theoretical and practical experiences which, in different ways, approached potencialities of participation of a community.s members in a project; and, finally, a investigation of propagation alternatives of individual readings as information source for urban project, trying to enhance points of view that generally remain occult in the form of invisible practices of anonymous users. This site must be understood as concretion of an idea: creating a vehicle from which is possible to become individual readings public, so that these are shared and, also, make them available to people responsible for urban projects as information source.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2022_234
id	ecaade2022_234
authors	Afsar, Secil, Estévez, Alberto T., Abdallah, Yomna K., Turhan, Gozde Damla, Ozel, Berfin and Doyuran, Aslihan
year	2022
title	Activating Co-Creation Methodologies of 3D Printing with Biocomposites Developed from Local Organic Wastes
source	Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 1, Ghent, 13-16 September 2022, pp. 215–224
doi	https://doi.org/10.52842/conf.ecaade.2022.1.215
summary	Compared to the take-make-waste-oriented linear economy model, the circular model has been studied since the 1980s. Due to consumption-oriented lifestyles along with having a tendency of considering waste materials as trash, studies on sustainable materials management (SMM) have remained at a theoretical level or created temporary and limited impacts. To ensure SMM supports The European Green Deal, there is a necessity of developing top-down and bottom-up strategies simultaneously, which can be metaphorized as digging a tunnel from two different directions to meet in the middle of a mountain. In parallel with the New European Bauhaus concept, this research aims to create a case study for boosting bottom-up and data-driven methodologies to produce short-loop products made of bio-based biocomposite materials from local food & organic wastes. The Architecture departments of two universities from different countries collaborated to practice these design democratization methodologies using data transfer paths. The 3D printable models, firmware code, and detailed explanation of working with a customized 3D printer paste extruder were shared using online tools. Accordingly, the bio-based biocomposite recipe from eggshell, xanthan gum, and citric acid, which can be provided from local shops, food & organic wastes, was investigated concurrently to enhance its printability feature for generating interior design elements such as a vase or vertical gardening unit. While sharing each step from open-source platforms with adding snapshots and videos allows further development between two universities, it also makes room for other researchers/makers/designers to replicate the process/product. By combining modern manufacturing and traditional crafting methods with materials produced with DIY techniques from local resources, and using global data transfer platforms to transfer data instead of products themselves, this research seeks to unlock the value of co-creative design practices for SMM.
keywords	Sustainable Materials Management, Co-Creation, Food Waste, 3D Printing, New European Bauhaus
series	eCAADe
email
last changed	2024/04/22 07:10

_id	9c41
authors	Ahmad Rafi, M.E., Chee W.K., Mai, N., Ken, T.-K. N. and Sharifah Nur, A.S.A. (Eds.)
year	2002
title	CAADRIA 2002 [Conference Proceedings]
source	Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X / Cyberjaya (Malaysia) 18–20 April 2002, 370 p.
doi	https://doi.org/10.52842/conf.caadria.2002.
summary	Evolution of trends in the realm of computer aided architectural design (CAAD) has seen the convergence of technologies – complementing traditional tools with emerging sciences like Information Technology (IT) and multimedia applications. This appliqué of technologies has not just expanded the scope and enhanced the realm of CAAD research and practice, but is also breaking new frontiers. This creative nexus will be realised at the 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA 2002) to be held at the Faculty of Creative Multimedia, Multimedia University, Malaysia, between 18th-20th April, 2002. CAADRIA 2002’s theme, "Redefining Content", seeks to recognise and infuse these emerging components in the field of architecture and design with a holistic approach towards online, digital and interactive systems. The 41 papers compiled were selected through a blind review process conducted by an international review panel. To reflect the multi-disciplinary nature of this year's conference, the chapters are arranged topically to facilitate the in-depth study of key components. The component sessions include: // Web Design, Database and Networks // CAD, Modelling and Tools // Collaborative Design, Creative Design and Case Reasoning // Simulation and Prototyping // Virtual Environment and Knowledge Management // Design Education, Teaching and Learning /// We believe that this specialised approach will provide a deeper and more illuminating feel of the various components and their critical convergence in the field of architecture and design.
series	CAADRIA
email
more	www.caadria.org
last changed	2022/06/07 07:54

_id	acadia21_328
id	acadia21_328
authors	Akbari, Mostafa; Lu, Yao; Akbarzadeh, Masoud
year	2021
title	From Design to the Fabrication of Shellular Funicular Structures
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 328-339.
doi	https://doi.org/10.52842/conf.acadia.2021.328
summary	Shellular Funicular Structures (SFSs) are single-layer, two-manifold structures with anticlastic curvature, designed in the context of graphic statics. They are considered as efficient structures applicable to many functions on different scales. Due to their complex geometry, design and fabrication of SFSs are quite challenging, limiting their application in large scales. Furthermore, designing these structures for a predefined boundary condition, control, and manipulation of their geometry are not easy tasks. Moreover, fabricating these geometries is mostly possible using additive manufacturing techniques, requiring a lot of supports in the printing process. Cellular funicular structures (CFSs) as strut-based spatial structures can be easily designed and manipulated in the context of graphic statics. This paper introduces a computational algorithm for translating a Cellular Funicular Structure (CFS) to a Shellular Funicular Structure (SFS). Furthermore, it explains a fabrication method to build the structure out of a flat sheet of material using the origami/ kirigami technique as an ideal choice because of its accessibility, processibility, low cost, and applicability to large scales. The paper concludes by displaying a structure that is designed and fabricated using this technique.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ac12
id	ac12
authors	Akin, Ö.; R. Krishnamurti, K.P. Lam (eds)
year	2005
title	Generative CAD Systems
source	Singapore: Carnegie Mellon University, 2005
summary	In the new millennium, Computer Aided Design has emerged as the most potent technological innovation in design. As BIM promises to integrate design tasks vertically and horizontally through graceful data exchange, new frontiers appear to researchers and practitioners as potential watershed events of the next decade. Generative approaches, a venerable engagement of computational design, is emerging as one of these. The proceedings of the Generative CAD Symposium held at Carnegie Mellon University, both summarizes the three decades of work in this area and reveals the beginnings of research and application expected in this domain. After all, will designers be able to effortlessly and intelligently generate potential design solutions that respond to appropriate design requirements and designers’ intentions?
series	book
type	normal paper
email
more	http://www.andrew.cmu.edu/user/oa04/publications_books.html
last changed	2008/09/04 07:18

_id	ecaade2013_235
id	ecaade2013_235
authors	Akküçük, Zeynep and Özkar, Mine
year	2013
title	Ruling Im/Material Uncertainties
source	Stouffs, Rudi and Sariyildiz, Sevil (eds.), Computation and Performance – Proceedings of the 31st eCAADe Conference – Volume 2, Faculty of Architecture, Delft University of Technology, Delft, The Netherlands, 18-20 September 2013, pp. 305-314
doi	https://doi.org/10.52842/conf.ecaade.2013.2.305
wos	WOS:000340643600031
summary	Visual rules are powerful in loosely capturing the impact of material behavior on form in designer’s hands-on experimentation. They present a first step to translate the causal relations between material and form to computation without sacrificing the uncertainties in the designer’s interaction with the materials. This study investigates how to model the relation between material and form with visual rules so that the model embodies some of the phenomenological aspects of reality, rather than merely reproducing it.
keywords	Digital materiality; physics-based modeling; abstractions; visual schemas; shape studies.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2003_c2-4
id	caadria2003_c2-4
authors	Al-Sallal, Khaled A.
year	2003
title	Integrating Energy Design Into Caad Tools: Theoretical Limits and Potentials
source	CAADRIA 2003 [Proceedings of the 8th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 974-9584-13-9] Bangkok Thailand 18-20 October 2003, pp. 323-340
doi	https://doi.org/10.52842/conf.caadria.2003.323
summary	The study is part of a research aims to establish theoretical grounds essential for the development of user efficient design tools for energy-conscious architectural design, based on theories in human factors of intelligent interfaces, problem solving, and architectural design. It starts by reviewing the shortcomings of the current energy design tools, from both architectural design and human factor points of view. It discusses the issues of energy integration with design from three different points of view: architectural, problem-solving, and human factors. It evaluates theoretically the potentials and limitations of the current approaches and technologies in artificial intelligence toward achieving the notion "integrating energy design knowledge into the design process" in practice and education based on research in the area of problem solving and human factors and usability concerns. The study considers the user interface model that is based on the cognitive approach and can be implemented by the hierarchical structure and the object-oriented model, as a promising direction for future development. That is because this model regards the user as the center of the design tool. However, there are still limitations that require extensive research in both theoretical and implementation directions. At the end, the study concludes by discussing the important points for future research.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2007_017
id	ascaad2007_017
authors	Alamgir, S.; A. Khan and K. Alamgir
year	2007
title	Computer Aided Environmental Solutions: Evaluation of Optimum Building Orientation in Lahore, Pakistan
source	Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 213-214
summary	One of the primary features of solar passive design is the orientation of a building on a particular latitude. The client of Information Technology demands testing, validity, practicality and sustainability of a building project before execution. The computer based simulations are the only practical way to predict the complex energy performance and analysis for a large number of passive design solutions. This paper investigates the optimum residential building orientation having various zones, located in Lahore, Pakistan, with the help of Energy Simulation program. It is concluded that with the help of software, it is possible to orient the residential plan with the minimum solar gain of the required living zones.
series	ASCAAD
email
last changed	2008/01/21 22:00

_id	ddssup0201
id	ddssup0201
authors	Alexiou, K. and Zamenopoulos, T.
year	2002
title	Artificial Design and Planning Support: Interactive Plan Generation andCoordination in Distributed Decision-Making
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings Avegoor, the Netherlands), 2002
summary	In this paper we discuss some basic issues pertaining to artificial plan design as a paradigm for architectural design and urban planning support. We present a model for artificial design generation based on learning control methodologies. Plan design is seen as a search for "coordinated" solutions (changes) that satisfy distributed domain requirements and views expressed by human or artificial agents. Learning control is used as a method to search for solutions that direct partial descriptionsproduced by agents, to follow their dynamically defined targets -despite conflicting requirements. The model is simulated for land use and layout plan design, involving decisions for the location and physical configuration of a hypothetical housing and retail development.
series	DDSS
last changed	2003/11/21 15:15

_id	1f37
authors	Alpha, Lee W.K. and Iki, Kazuhisa
year	2001
title	Moving Architecture and Transiting Landscape. Interactive Rendering System for Animated Assessment
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 739-752
summary	In this paper, an Interactive Rendering System for Animated Assessment (IRSA2) is proposed. Using IRSA2, different to the usual process that the respondents are allowed only to select alternatives designed by planners, they are allowed to participate in the design process and create alternatives as proposals in a web-based collaborative environment. This gives roads to an autonomous process in landscape planning and design. The system efficiency was verified by a case study of its use in a wind farm project in Japan.
keywords	Collaborative Design, Utilization Of Internet, Overall Design Strategy,
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	ecaade2020_193
id	ecaade2020_193
authors	Alymani, Abdulrahman, Jabi, Wassim and Corcoran, Padraig
year	2020
title	Machine Learning Methods for Clustering Architectural Precedents - Classifying the relationship between building and ground
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 643-652
doi	https://doi.org/10.52842/conf.ecaade.2020.1.643
summary	Every time an object is built, it creates a relationship with the ground. Architects have a full responsibility to design the building by taking the ground into consideration. In the field of architecture, using data mining to identify any unusual patterns or emergent architectural trends is a nascent area that has yet to be fully explored. Clustering techniques are an essential tool in this process for organising large datasets. In this paper, we propose a novel proof-of-concept workflow that enables a machine learning computer system to cluster aspects of an architect's building design style with respect to how the buildings in question relate to the ground. The experimental workflow in this paper consists of two stages. In the first stage, we use a database system to collect, organise and store several significant architectural precedents. The second stage examines the most well-known unsupervised learning algorithm clustering techniques which are: K-Means, K-Modes and Gaussian Mixture Models. Our experiments demonstrated that the K-means clustering algorithm method achieves a level of accuracy that is higher than other clustering methods. This research points to the potential of AI in helping designers identify the typological and topological characteristics of architectural solutions and place them within the most relevant architectural canons
keywords	Machine Learning; Building and Ground Relationship; Clustering Algorithms; K-means cluster Algorithms
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: