Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 54

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2021_262
id	caadria2021_262
authors	Olthof, Owen, Globa, Anastasia and Stracchi, Paolo
year	2021
title	SISTEMA NERVI - Sustainable Production of Optimised Floor Slabs Through Digital Fabrication
source	A. Globa, J. van Ameijde, A. Fingrut, N. Kim, T.T.S. Lo (eds.), PROJECTIONS - Proceedings of the 26th CAADRIA Conference - Volume 1, The Chinese University of Hong Kong and Online, Hong Kong, 29 March - 1 April 2021, pp. 723-732
doi	https://doi.org/10.52842/conf.caadria.2021.1.723
summary	'Sistema Nervi' (the Nervi System) invented by Pier Luigi Nervi greatly economised the production of complex concrete forms optimised in both material usage and structurally. However it did not translate well into other contexts due to labour and material considerations (Leslie, 2018). This paper explores novel methodologies of producing optimised floor slabs and concrete structures, using digital fabrication techniques, focusing on both labour economisation and sustainability principles. A module from the Australia Square lobby slab has been used as the set geometry and was reproduced using differing techniques of fabrication for a comparative study. The study was conducted at scale (1:20). The viability for production at full scale (1:1) for manufacturing is discussed. The assessment criteria for the tests are divided into four categories: Cost, Time, Performance, and Sustainability. 3D printing of PLA plastic and ceramic clay extrusion printing has been used to produce removable or degradable formworks. These technologies have been selected due to their current market availability and associated costs. This study hopes to introduce improved methodologies for producing optimized concrete forms, as well as the sustainability potentials of a degradable formwork such as ceramic clay. Both systems were ultimately able to produce workable formworks for optimised shapes and showed promise for reducing labour involved as well as presenting with material sustainability for discussion.
keywords	Concrete formwork; Sustainability; Degradable formwork; Optimised concrete; Advanced fabrication
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaadesigradi2019_675
id	ecaadesigradi2019_675
authors	Taha, Nizar, Walzer, Alexander Nikolas, Ruangjun, Jetana, Bürgin, Theophil, Dörfler, Kathrin, Lloret-Fritschi, Ena, Gramazio, Fabio and Kohler, Matthias
year	2019
title	Robotic AeroCrete - A novel robotic spraying and surface treatment technology for the production of slender reinforced concrete elements
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 3, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 245-254
doi	https://doi.org/10.52842/conf.ecaade.2019.3.245
summary	This research paper presents a novel method for robotic spraying of glass-fibre reinforced concrete (GFRC) on a permeable reinforcement mesh. In this process, the mesh acts as a functional formwork during the concrete spraying process and as reinforcement once the concrete is cured, with the goal of producing slender reinforced concrete elements efficiently. The proof of concept presented in this paper takes inspiration from "Ferrocement" technique, developed in the 1940s by Pier Luigi Nervi (Greco, 1994) and shows how robotic spraying has the potential of producing such slender and bespoke reinforced concrete elements while also having the potential of reducing manual labour, waste and excess material. The system is coined with the name "Robotic AeroCrete" (or RAC) in reference to the use of an industrial robotic setup and the pneumatic projection of concrete.
keywords	Shotcrete; Digital Fabrication; Robotic Fabrication; Ferrocement
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	d414
authors	Zalewski, Waclaw and Allen, Edward
year	1998
title	Shaping Structures
source	New York: John Wiley and Sons
summary	In Shaping Structures, an engineer and an architect, both longtime teachers of structures at major American universities, collaborate to present an inspired synthesis of the creative and the technical, explicating both the principles of statics and their application to the fascinating task of finding good form for structures. This richly visual volume features: * An easily understood development of the fundamentals of statics * Step-by-step demonstrations, using both numerical and graphical techniques, of simple yet powerful methods for finding form and forces for arched structures, suspended structures, cable-stayed structures, and highly efficient trusses * 120 photographs and more than 300 crisp drawings that illustrate and explain the magnificent structural triumphs of master architects and engineers -including Gustave Eiffel's famous tower, Robert Maillart's soaring bridges, Pier Luigi Nervi's landmark Turin Exhibition Hall, and many others * Calculations in both SI metric and conventional units throughout the book Requiring only the most rudimentary mathematical background yet accurate and fully functional, Shaping Structures provides an inviting point of entry to the study of structural design for engineering and architecture students -proving that the science of statics doesn't have to be lifeless, simplistic, or dull.
series	other
last changed	2003/04/23 15:14

_id	avocaad_2001_18
id	avocaad_2001_18
authors	Aleksander Asanowicz
year	2001
title	The End of Methodology - Towards New Integration
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	The present paper is devoted to the deliberation on the genesis and development of designing from the point of view of the potential use of computers in the process. Moreover, it also presents the great hopes which were connected with the use of the systematic designing methods in the 1960’s, as well as the great disappointment resulting from the lack of concrete results. At this time a great deal of attention was paid to the process of design as a branch of a wider process of problem-solving. Many people believed that the intuitive methods of design traditionally used by architects were incapable of dealing with the complexity of the problems to be solved. Therefore, the basic problem was the definition of a vertical structure of the designing process, which would make it possible to optimise each process of architectural design. The studies of design methodology directed at the codification of the norms of actions have not brought about any solutions which could be commonly accepted, as the efforts to present the designing process as a formally logical one and one that is not internally “uncontrary” from the mathematical point of view, were doomed to fail. Moreover, the difficulties connected with the use of the computer in designing were caused by the lack of a graphic interface, which is so very characteristic of an architect’s workshop. In result, the methodology ceased to be the main area of the architect’s interest and efforts were focused on facilitating the method of the designer’s communication with the computer. New tools were created, which enabled both the automatic generation of diversity and the creation of forms on the basis of genetic algorithms, as well as the presentation of the obtained results in the form of rendering, animation and VRML. This was the end of the general methodology of designing and the beginning of a number of methods solving the partial problems of computer-supported design. The present situation can be described with the words of Ian Stewart as a “chaotic run in all directions”. An immediate need for new integration is felt. Cyber-real space could be a solution to the problem. C-R-S is not a virtual reality understood as an unreal world. Whilst VR could be indeed treated as a sort of an illusion, C-R-S is a much more realistic being, defining the area in which the creative activities are taking place. The architect gains the possibility of having a direct contact with the form he or she is creating. Direct design enables one to creatively use the computer technology in the designing process. The intelligent system of recognising speech, integrated with the system of virtual reality, will allow to create an environment for the designer – computer communication which will be most natural to the person. The elimination of this obstacle will facilitate the integration of the new methods into one designing environment. The theoretical assumptions of such an environment are described in the present paper.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	sigradi2013_117
id	sigradi2013_117
authors	Alves Veloso, Pedro L.; Anja Pratschke
year	2013
title	Uma Arqueologia de Diagramas Cibernéticos [An Archaeology of Cybernetic Diagrams]
source	SIGraDi 2013 [Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Chile - Valparaíso 20 - 22 November 2013, pp. 353 - 356
summary	This paper investigates the use of explicit structures of information in architectural design. Particularly, it approaches the use of diagrams related to cybernetics and information theory in experimental practices in the 1960’s and 1970’s. It analyses the diagram of cybernetic control proposed by the cybernetician Gordon Pask for the Fun Palace, the diagrams produced by the utopian architect Yona Friedman in the conceptual description of the Flatwriter program and Christopher Alexander’s diagrams and his theories of Synthesis of Form and Pattern Language. Finally it establishes a brief parallel between current domestication and use of dataflow programming with the cybernetic diagrams, highlighting differences in their complexity approach.
keywords	Dataflow diagrams; Cybernetics; Complexity
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	d5c8
authors	Angelo, C.V., Bueno, A.P., Ludvig, C., Reis, A.F. and Trezub, D.
year	1999
title	Image and Shape: Two Distinct Approaches
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 410-415
summary	This paper is the result of two researches done at the district of Campeche, Florianópolis, by the Grupo PET/ARQ/UFSC/CAPES. Different aspects and conceptual approaches were used to study the spatial attributes of this district located in the Southern part of Santa Catarina Island. The readings and analysis of two researches were based on graphic pistures builded with the use of Corel 7.0 e AutoCadR14. The first research – "Urban Development in the Island of Santa Catarina: Public Space Study"- examined the urban structures of Campeche based on the Spatial Syntax Theory developed by Hillier and Hanson (1984) that relates form and social appropriation of public spaces. The second research – "Topoceptive Characterisation of Campeche: The Image of a Locality in Expansion in the Island of Santa Catarina" -, based on the methodology developed by Kohlsdorf (1996) and also on the visual analysis proposed by Lynch (1960), identified characteristics of this locality with the specific goal of selecting attributes that contributed to the ideas of the place its population held. The paper consists of an initial exercise of linking these two methods in order to test the complementarity of their analytical tools. Exemplifying the analytical procedures undertaken in the two approaches, the readings done - global (of the locality as a whole) and partial (from parts of the settlement) - are presented and compared.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2017_038
id	ecaade2017_038
authors	Asanowicz, Aleksander
year	2017
title	Parametric design - Tool, medium or new paradigm?
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 379-386
doi	https://doi.org/10.52842/conf.ecaade.2017.2.379
summary	Parametric design is an emerging research issue in the design domain. However, discussions about the creative process in parametric design are limited. What is more, despite the passing of 57 years of parametric design's existence we still do not know what parametric design is. Is it a simple tool, which is useful in some kind of optimization of the architectural form, or it is a medium, which helps architects develop unexpected solutions, and perhaps this is already a new design paradigm? The presented paper will contain general considerations relating to the nature of parametric design, the history of which starts in 1960, when D.T. Ross has formulated the thesis that our main objective is to formulate constrains and all needed parameters of the solved problem.Please write your abstract here by clicking this paragraph.
keywords	optimisation; parametric design; design tool; design media
series	eCAADe
email
last changed	2022/06/07 07:54

_id	be17
authors	Chen, Yen-Jen and Chen, Ching-Yu
year	2000
title	The Representation of Information Structure in the Cyber World. A Space Cognition Approach
source	CAADRIA 2000 [Proceedings of the Fifth Conference on Computer Aided Architectural Design Research in Asia / ISBN 981-04-2491-4] Singapore 18-19 May 2000, pp. 351-356
doi	https://doi.org/10.52842/conf.caadria.2000.351
summary	The Internet, the place that people called "cyberspace", is a new place that people can explore in now. But we usually fell "astray" in there because there are no signs like roads, bridges, like it is in the physical world. This paper tries to cite the Lynch's (1960) urban design theory, then to develop a new Internet search mechanism's graphic user interface, and tries to help people explore in Internet more effectively.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ecaade2023_363
id	ecaade2023_363
authors	Fleckenstein, Julia, Bertagna, Federico, Piccioni, Valeria, Fechner, Mareen, Düpree, Mia, DAcunto, Pierluigi and Dörfler, Kathrin
year	2023
title	Revisiting Breuer through Additive Manufacturing: Passive solar-control design strategies for bespoke concrete building envelope elements
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 527–538
doi	https://doi.org/10.52842/conf.ecaade.2023.1.527
summary	With the IBM Research Center in La Gaude, France (1960-1962), the architect Marcel Breuer pioneered a novel industrial approach towards modular construction using precast façade elements for on-site assembly, combining load-bearing and solar control functions in their configuration. This industrial production method involved a high level of standardization, which was a practical response to the need for rapid and cost-effective construction systems. However, this standardization limited the ability to create custom elements to meet specific local requirements, such as variations in solar exposure. To overcome this limitation, new methods of Additive Manufacturing in Construction (AMC) could enhance design flexibility, allowing for bespoke designs while still maintaining industrialisable production processes. This paper draws inspiration from Breuer's building design with the aim to expand the concept of element prefabrication by incorporating performance-based and locally customized design approaches supported by AMC technology. As such, the authors present the method and results of an experimental case study for multi-scale-differentiation of building envelope elements, which design was informed by solar radiation simulations and AMC-related boundary conditions. The research describes an algorithmic based design-to-production workflow combining computational design and simulation methods using geometry-based graphical methods for solar control and solar radiation simulations for form-based changes, leveraging the potential of Selective Cement Activation (SCA) as an AMC technology. The workflow was tested and evaluated on behalf of the design and additive manufacturing of a building envelope element at full building scale.
keywords	additive manufacturing in construction, performance-oriented computational design, passive solar control, climate-aware design, functional hybridization
series	eCAADe
email
last changed	2023/12/10 10:49

_id	sigradi2021_151
id	sigradi2021_151
authors	Gameiro, Raquel and Paio, Alexandra
year	2021
title	IDEAS: Interactive Database for Experimental Architecture and Spatial Practices
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 643–655
summary	The interface of science and technology has become a fruitful transdisciplinary research field for spatial practices. To address this hybridization of space-related research, it is fundamental to ask what kind of practices are emerging within this context. To promote easy access and the dissemination of methodologies applied in innovative experimental spatial practices, the present study proposes the creation of a web-based Interactive Database for Experimental Architecture and Spatial Practices, IDEAS. Therefore, we will scope, observe, examine, and classify the digital cultural landscape in the 1960-2020 period. This paper describes the methodology applied to develop IDEAS.
keywords	Spatial practices, Data gathering, Taxonomy, Architecture Wiki, Interactive Repository
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	ecaade03_427_177_gibson
id	ecaade03_427_177_gibson
authors	Gibson, Kathleen
year	2003
title	Spatial Mapping: Connections between Virtual and Physical Navigation
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 427-432
doi	https://doi.org/10.52842/conf.ecaade.2003.427
summary	Using Lynch’s (1960) treatise The Image of the City as a model, user navigation of e-retailing web sites was analyzed using defined categories: paths, districts, edges, nodes, and landmarks. Results from this study suggest that elements in the urban landscape and their use by individuals for way finding and legibility may be similar to those necessary for navigating the World Wide Web.
keywords	Spatial mapping; way finding; e-retailing; built environment; world wideweb
series	eCAADe
email
more	http://www.humec.cornell.edu/faculty/facultybio.cfm?netid=kjg4&facs=1
last changed	2022/06/07 07:51

_id	ecaade2020_131
id	ecaade2020_131
authors	Gortazar-Balerdi, Ander and Markusiewicz, Jacek
year	2020
title	Legible Bilbao - Computational method for urban legibility
source	Werner, L and Koering, D (eds.), Anthropologic: Architecture and Fabrication in the cognitive age - Proceedings of the 38th eCAADe Conference - Volume 1, TU Berlin, Berlin, Germany, 16-18 September 2020, pp. 209-218
doi	https://doi.org/10.52842/conf.ecaade.2020.1.209
summary	Legibility is a core concept in spatial cognition theories since Kevin Lynch published The Image of the City in 1960. It is the ability of a city to be interpreted and easily used, travelled and enjoyed, from the pedestrian's perspective. Following a proposal in the participatory budget process of the city of Bilbao, we wrote a technical report to improve the urban legibility of the city and facilitate wayfinding through innovations in signage. This paper aims to present this project, which is an application of computational methods to measure urban legibility that resulted in a proposal for a new wayfinding strategy for Bilbao. The method is based on GIS data, and it simulates urban processes using dedicated algorithms, allowing us to perform two analyses that resulted in two overlapping maps: a heat map of decision points and a map of visual openings. It allowed us to perceive common urban elements that can help to decide both the location of the wayfinding signage and how it should provide the relevant information. In addition, the research introduces the concept of anticipation points, as a complement to the existing idea of decision points.
keywords	Wayfinding; Urban legibility; Spatial cognition
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2007_af13
id	sigradi2007_af13
authors	Granero, Adriana Edith; Alicia Barrón; María Teresa Urruti
year	2007
title	Transformations in the educational system, Influence of the Digital Graph [Transformaciones en el sistema educacional, influencia de la Gráfica Digital]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 182-186
summary	The educative proposal was based on the summary attained through experiences piled up during the 2 last semester courses, 2/2006-1/2007. This proposal corresponds to a mix of methodology (by personal attendance / by internet). Founding on the Theory of the Game (Eric Berne 1960) and on different theories such as: Multiple intelligences (Haward Gardner 1983), Emotional Intelligence (Peter Salowey and John Mayer 1990, Goleman 1998), Social Intelligence (Goleman 2006), the Triarchy of Intelligence (Stemberg, R.J. 1985, 1997), “the hand of the human power”, it´s established that the power of the voice, that of the imagination, the reward, the commitment and association produce a significant increase of the productivity (Rosabeth Moss Kanter 2000), aside from the constructive processes of the knowledge (new pedagogical concepts constructivista of Ormrod J.E. 2003 and Tim O´Reilly 2004).
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	70c4
authors	Gross, M.D., Do, E.Y.-L. and Johnson, B.R.
year	2000
title	Beyond the low-hanging fruit: Information technology in architectural design past, present and future
source	W. Mitchell and J. Fernandez (eds), ACSA Technology Conference, MIT Press, Cambridge MA
summary	Today's commercial CAD software is the product of years of research that began in the 1960's and 1970's. These applications have found widespread use in the architectural marketplace; nevertheless they represent only the first fruits of research in computer aided design. New developments based on research in human-computer interaction (HCI), computer-supported collaborative work (CSCW), and virtual reality (VR) will result in a next generation of tools for architectural design. Although preliminary applications to design have been demonstrated in each of these areas, excellent opportunities remain to exploit new technologies and insights in service of better design software. In this paper we briefly examine each of these areas using examples from our own work to discuss the prospects for future research. We envision that future design technologies will develop from current and traditional conventions of practice combined with forward looking application of emerging technologies. In HCI, pen based interaction will allow architects to use the pencil again, without sacrificing the added power of computer aided design tools, and speech recognition will begin to play a role in capturing and retrieving design critique and discussion. In CSCW, a new generation of applications will address the needs of designers more closely than current general purpose meeting tools. In VR, applications are possible that use the technology not simply to provide a sense of three-dimensional presence, but that organize design information spatially, integrating it into the representation of artifacts and places.
series	other
email
last changed	2003/04/23 15:50

_id	ecaaderis2023_41
id	ecaaderis2023_41
authors	Hadighi, Mahyar and Hadighi, Mehrdad
year	2023
title	Between System and Improvisation: Aesthetic performance in Donald Judd’s 100 untitled works in mill aluminum
source	De Luca, F, Lykouras, I and Wurzer, G (eds.), Proceedings of the 9th eCAADe Regional International Symposium, TalTech, 15 - 16 June 2023, pp. 79–88
summary	In this paper, we intend to analyze Donald Judd’s “100 untiled works in mill aluminum” to see whether they belong to a system, and, if so, what that system is and what delimits it. Our hypothesis is that there is a system driven by shape data, but the system is tempered by improvisational moments at multiple junctures in the project. We are interested in deciphering the systematic, but also the moments of artistic improvisation. To that end, we will look at the roots of data-driven design in the “serial” artworks of the early 1960’s documented in two Artforum essays by Bochner and Coplans, both citing Donald Judd. This period of artistic production is critical in the context of the development of shape grammars in computation which followed in the early 70’s with Stiny and Gips’s Shape Grammar essay. In 1983, Knight used shape grammar to describe the transformation of design languages. In the same period, Donald Judd, without the aid of computation or knowledge of shape grammar, developed a grammar towards the design of “100 untiled works in mill aluminum.” We intend to explore Judd’s 100 works as an example of the utilization of information and its analysis towards design and innovation, and to highlight the role of artistic improvisation in a systemic design process.
keywords	Donald Judd, Design System, Shape Grammar, Serial Art.
series	eCAADe
email
last changed	2024/02/05 14:28

_id	ecaade2018_169
id	ecaade2018_169
authors	Kasahara, Maki, Matsushita, Kiwa and Mizutani, Akihiro
year	2018
title	Learning from Generative Design System in the 60's - Case Study of Agricultural City Project by Kisho Kurokawa
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 95-102
doi	https://doi.org/10.52842/conf.ecaade.2018.2.095
summary	The concept of generative design in Architecture and Urbanism can be found in the 60's before the wide availability of computer technology. This paper decodes one of the urban projects by Metabolist in 1960, which was intended to be a generative system applicable to other sites and evolves over time. Through our analysis, we de-code the formulation process, and verified our hypothesis by re-coding into the program using the software, Rhinoceros and Grasshopper. We found that the determinate factors rule more at the macro level of the project, but the parameters are set by taking the local conditions into account. At the micro level, the system leaves more freedom to accommodate various needs, reflecting the philosophy of the Metabolists. The investigation on this historical predecessor can provide useful insights for parameter settings in future generative system design.
keywords	Generative Design; Grasshopper; Kisho Kurokawa
series	eCAADe
email
last changed	2022/06/07 07:52

_id	f59d
authors	Koelbl, R., Bruntsch, St. and Knoflacher, H.
year	2003
title	Perspective Vienna – A Comparison of Planning Scenarios and Real Development
source	CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary	With the suspension of national boarders in unions of nations, cities and their regions gain in significance for the economic, social and cultural development. This is particularly valid for Vienna, which lies close to the eastern boarder of the European Union, which should fall with the enlargement of EU in the near future. Of prominent importance is therefore to obtain a comprehensive understanding between proposed and defined aims for an urban development, the related measures and their extent ofimplementations and their actual or real effects. This paper attempts to give a strategic analysis of the Viennese urban and traffic development programs, from 1962, 1972, 1984 and 1994, on the one hand, and the data analysis of the statistical year books beginning from 1960 until 2000, on the other. The results show that adjustments have been made not only in response to certain trends, but also to a change of philosophy of urban development. It can be seen that certain assumptions of, for example, economic and transport measures can have the opposite outcome in relation to the intended objectives. Hence, one main question remains to beanswered: How should Vienna deal with the challenges ahead, to secure and foster a sustainable development under such circumstances on a long-term basis. In this respect, some measures are given, which should make it possible to overcome successfully these challenges.
series	other
email
last changed	2003/03/11 20:39

_id	acadia06_555
id	acadia06_555
authors	Kudless, A., Vukcevich, I.
year	2006
title	Flexible Formwork Research (FPR)
source	Synthetic Landscapes [Proceedings of the 25th Annual Conference of the Association for Computer-Aided Design in Architecture] p. 555
doi	https://doi.org/10.52842/conf.acadia.2006.x.r8t
summary	FFR investigates the self-organization of plaster and elastic fabric to produce evocative visual and acoustic effects. Inspired by the work of the Spanish architect Miguel Fisac and his experiments with flexible concrete formwork in the 1960-70s, FFR continues this line of research by exploring aspects of pattern generation and recognition in relation to self-organized form. In line with the theme of the current exhibition, Digital Exchange, the work can be understood as a dialog between physical and digital computation. The form is a result of a negotiation between the digital manipulation of images and the physical deformations of materials under stress. Both digital and physical processes play an equal role in the final form of the plaster tiles.Reflecting on Miguel Fisac’s flexible concrete formwork, there was a desire to investigate the potential for more differentiated patterns while still using the same basic fabrication technique. This was accomplished through the use of a custom-designed script in Rhino that analyzes a given image and translates it into a field of points. These points establish areas of constraint in the elastic membrane of the mould. Through numerous physical tests, the minimum and maximum distances between constraint points was determined and these were entered into the script as limits for the point creation. If the points are too close, large wholes with very thin and weak plaster form whereas if the points are too far apart the amount of elastic deformation is so great that the weight of the plaster can cause failures to occur in the fabric mould. One of the most important aspects of the project is its resonance with the body and our natural attraction and repulsion for certain forms. Through exploring the natural self-organization of material under stress, FFR unintentionally reminds us of our own flesh. The plaster tiles resonate with our own body’s material as it sags, expands, and wrinkles in relationship with gravity, structure, and time.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	4cb3
authors	Kwartler, Michael
year	1995
title	Beyond the Adversial: Conflict Resolution, Simulation and Community Design
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4]
summary	Fundamentally, the design of communities in the United States is grounded in the Constitution’s evolving definition of property and the rights and obligations attendant to the ownership and use of real property. The rearticulation of Jefferson’s dictum in the Declaration of Independence; “that individuals have certain inalienable rights, among these are life, liberty, and the pursuit of happiness” to the Constitution’s “life, liberty and property” represents a pragmatic understanding of the relationship between property and the actualization of the individual in society. In terms of community design, this means extensive public involvement and participation in not only the formulation of rules and regulations but of individual projects as well. Since the 1960’s as planning and community design decision making has become increasingly contentious, the American legal system’s adversial approach to conflict resolution has become the dominant model for public decision making. The legal system’s adversial approach to adjudication is essentially a zero-sum game of winners and losers, and as most land-use lawyers will agree, is not a good model for the design of cities. While the adversial approach does not resolve disputes it rarely creates a positive and constructive consensus for change. Because physical planning and community design issues are not only value based, community design through consensus building has emerged as a new paradigm for physical planning and design. The Environmental Simulation Center employs a broad range of complementary simulation and visualization techniques including 3-D vector based computer models, endoscopy, and verifiable digital photomontages to provide objective and verifiable information for projects and regulations under study. In this context, a number of recent projects will be discussed which have explored the use of various simulation and visualization techniques in community design. Among them are projects involved with changes in the City’s Zoning Regulations, the community design of a major public open space in one of the region’s mid-size cities, and the design of a new village center for a suburban community, with the last project employing the Center’s userfriendly and interactive 3-D computer kit of parts. The kit - a kind of computer “pattern book” is comprised of site planning, urban and landscape design and architectural conventions - is part of the Center’s continuing effort to support a consensus based, rather than adversial based, public planning and design process.
keywords	Architectural Simulation, Real Environments
series	EAEA
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

For more results click below: