CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 8923

_id ascaad2014_025
id ascaad2014_025
authors Elias-Ozkan, Soofia T. and Hatem Hadia
year 2014
title Teaching and Learning Building Performance Virtualisation
source Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 323-330
summary Building performance simulation tools have indeed eased the task of evaluating a building’s performance from the point of view of lighting design, heating and cooling loads, total energy loads, acoustic properties, natural lighting, ventilation, smoke and fire containment etc. However, to use these tools correctly, not only is theoretical knowledge required but also insight that can only be attained after substantial experience. For example, in order to evaluate the thermal performance alone, one needs to understand climatology, material properties, building physics, HVAC systems, internal and external gain factors, solar impacts, etc. to name a few. Hence, teaching students of Architecture how to use these tools, and also to interpret the results properly, is a tall order. This paper reports on insights gained through teaching courses on building performance simulations to graduate students in the Department of Architecture. The course content was varied each term and a different simulation software was used; namely: ECOTECT, Energy Plus and Design Builder. Data presented here will also contain feedback from the course students regarding the modelling process of the buildings, inputting the data, simulating their performance, and evaluating the results. Also, the difficulties faced during the various steps as well as the drawbacks of the tools will be discussed in depth.
series ASCAAD
type normal paper
email
last changed 2021/07/16 10:36

_id 8d59
authors Andersen, J.M.
year 1983
title CAD in Architectural Practice
source Mechanical Engineering. July, 1983. pp. 48-54 : ill. includes a short bibliography
summary A leading architecture/engineering firm has made use of in- house computer system since 1963. This paper discusses some special topics in using computers for the design of HVAC systems, and the process of implementing CAD in the HVAC engineering practice
keywords computer graphics, HVAC, applications, practice, architecture
series CADline
last changed 2003/06/02 13:58

_id cf2011_p051
id cf2011_p051
authors Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year 2011
title A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords design, ideation process, mental workload, mental imagery, quantitative mesure
series CAAD Futures
email
last changed 2012/02/11 19:21

_id 2
authors Montagu, Arturo
year 1998
title Desde La Computacion Grafica a los Sistemas CAD Actuales. Una Vision Historica de la Revolucion Producida en los Sistemas de Representacion Grafica (1966-1998) (From Graphical Computation to Present CAD Systems. An Historical Vision of the Revolution Produced in the Systems of Graphical Representation (1966-1998))
source II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 14-21
summary Throughout these pages are made known the persons, the projects and the books that have influenced my actions and that they will be mentioned in form underlined in this paper. I have to emphasize that since 1965 to 1970, and in the continuous search that I was accomplishing to find data and bibliography adapted to the topic of computer graphics, only two series of publications contained topics related to this matter at that time: one was the IBM Journal and the other series was the communications of the ACM. The purpose of this work is to make known an experience accomplished throughout 30 years of intense activity in finding new methods of drawing and design, based on the use of digital computers, mainly in Argentina, and during certain periods of time in Great Britain and since 1971 during short visits to the United States and also in France. The first idea emerged in the year 1965 when I was assistant teacher at the School of Architecture of the University of Buenos Aires, as a combination of ideas between the concepts of spatial geometry and the current morphological studies that we taught in the Course of professor Gaston Breyer. However the idea of automatic drawing emerged observing the operation of the first scientific digital computer installed in the Computing Institute of the Faculty of Sciences of the University of Buenos Aires in 1963 (Sadosky 1963). At the beginning, the approach to the computer were not accomplished from a strictly scientific point of view, but it was implying a kind of "sincresis" (Koheler 1940) it is more than a synthesis, because I was tried to combine ideas that have had its origin in different worlds of thinking, the analogous world and the digital world, and this situation was very difficult to accept at that time.The designing procedures in the decade 1960's was deeply rooted (and still continues) in the architectural design field as a result of a drawing process based in heuristic techniques.
series SIGRADI
email
last changed 2016/03/10 09:55

_id acadia08_390
id acadia08_390
authors Vrana, Andrew; Joe Meppelink; Ben Nicholson
year 2008
title New Harmony Grotto
source Silicon + Skin: Biological Processes and Computation, [Proceedings of the 28th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) / ISBN 978-0-9789463-4-0] Minneapolis 16-19 October 2008, 390-399
doi https://doi.org/10.52842/conf.acadia.2008.390
summary With the expanding wave of contemporary architecture inspired and informed by biomorphic design and biomimetic processes, the re-evaluation of work of Frederick Kiesler has become immanent. Throughout the mid 20th century he became increasingly interested in the relationship of natural form and structure to architectural space and organization. The Grotto for Meditation proposed in 1963 for New Harmony, Indiana commissioned by Mrs. Jane Blaffer-Owen was the culmination of his life’s work. Though the project was not realized, it embodies all of the influences of his time from surrealism to biology and cybernetic theory. Through our university and the Blaffer Foundation, we engaged in formal research and tectonic resolution of the project employing digital modeling and fabrication technologies at our College and in Houston where Mrs. Owen lives when she is not in New Harmony. We based this project on the full catalog of archival material made available to us with support from the Blaffer and Kielser Foundations. Our exploration also was influenced by discussions with Mrs. Blaffer-Owen who is still very interested in realizing this profoundly interesting and enigmatic project. Our university has opened the door to the opportunity that our reinterpreted Grotto become a permanent fixture on the campus next to a wetland landscape that it is currently under construction. Our research into Kiesler has engaged his esoteric concepts of “co-realism” and “continuous tension” as well as his early use of recursive geometry and biomorphic form in design. From reverse engineering and digital fabrication via 3D scanning to generative structural articulation, we are experimenting with a structural/spatial system that closely aligns with Kiesler’s originally proposed tile patterning dilated into a minimal structure. Our prototypes and the final version will be fabricated by one of the largest commercially for-hire water jet cutter in country and assembled on the site.
keywords Biomorphic; Digital Fabrication; Prototype; Structure
series ACADIA
last changed 2022/06/07 07:58

_id caadria2006_633
id caadria2006_633
authors WAN-YU LIU
year 2006
title THE EMERGING DIGITAL STYLE: Attention shift in architectural style recognition
source CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 633-635
doi https://doi.org/10.52842/conf.caadria.2006.x.g4f
summary “Style” has long been an important index to observe the design thinking of designers in architecture. Gombrich (1968) defined style as a particular selection from the alternatives when doing things; Ackerman (1963) considered that a distiguishable ensemble of certain characteristics we call a style; Schapiro (1961) pointed out that style is constant forms, and sometimes the constant elements, qualities and expression; Kirsch (1998), Cha and Gero (1999) thought of style as a form element and shape pattern. As Simon and others referred to, style emerged from the process of problem solving, Chan (1994, 2001) ever devised a serious of experiments to set up the operational definitions of style, further five factors that relate to generating styles. Owing to that the greater part of sketches and drawings in the design process couldn’t be replaced by computer-aided design systems (Eisentraut, 1997), designers must shift between different problem-solving methods while facing different design problems. The purpose in this research is to discuss the influences of computer usage on style generation and style recognition: The employment of certain procedural factors that occurred in the design processes that using conventional media is different from the ones that using computer media? Do personal styles emerge while designers shifting between different media in the design processes? Does any unusual phenomenon emerge while accustomed CAD-systems designers recognizing a style?
series CAADRIA
email
last changed 2022/06/07 07:49

_id 1a3d
authors Willey, David
year 1999
title Sketchpad to 2000: From Computer Systems to Digital Environments
source Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 526-532
doi https://doi.org/10.52842/conf.ecaade.1999.526
summary It can be argued that over the last thirty five years computer aided architectural design (CAAD) has made little impact in terms of aiding design. The paper provides a broadbrush review of the last 35 years of CAAD research and suggests that the SKETCHPAD notion that has dominated CAAD since 1963 is now a flawed concept. Then the discipline was replete with Modernist concepts of optimal solutions, objective design criteria and universal design standards. Now CAD needs to proceed on the basis of the Post Modern ways of thinking and designing opened up by digital techniques - the Internet, multimedia, virtual reality, electronic games, distance learning. Computers facilitate information flow and storage. In the late seventies and eighties the CAAD research community's response to the difficulties it had identified with the construction of integrated digital building models was to attempt to improve the intelligence of the computer systems to better match the understanding of designers. Now it is clear that the future could easily lie with CAAD systems that have almost no intelligence and make no attempt to aid the designer. Communication is much more central to designing than computing.
keywords History, Intelligence, Interface, Sketchpad, Web
series eCAADe
email
last changed 2022/06/07 07:56

_id acadia11_82
id acadia11_82
authors Ahlquist, Sean; Menges, Achim
year 2011
title Behavior-based Computational Design Methodologies: Integrative processes for force defined material structures
source ACADIA 11: Integration through Computation [Proceedings of the 31st Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)] [ISBN 978-1-6136-4595-6] Banff (Alberta) 13-16 October, 2011, pp. 82-89
doi https://doi.org/10.52842/conf.acadia.2011.082
summary With the introduction of physics-based algorithms and modeling environments, design processes have been shifting from the representation of materiality to the simulation of approximate material descriptions. Such computational processes are based upon enacting physical and material behavior, such as gravity, drag, tension, bending, and inflation, within a generative modeling environment. What is often lacking from this strategy is an overall understanding of computational design; that information of increasing value and precision is generated through the development and iterative execution of specific principles and integrative mechanisms. The value of a physics-based modeling method as an information engine is often overlooked, though, as they are primarily utilized for developing representational diagrams or static geometry – inevitably translated to function outside of the physical bounds and parameters defined with the modeling process. The definition of computational design provides a link between process and a larger approach towards architecture – an integrative behavior-based process which develops dynamic specific architectural systems interrelated in their material, spatial, and environmental nature. This paper, focusing on material integration, describes the relation of a computational design approach and the technical framework for a behavior-based integrative process. The application is in the development of complex tension-active architectural systems. The material behavior of tensile meshes and surfaces is integrated and algorithmically calibrated to allow for complex geometries to be materialized as physical systems. Ultimately, this research proposes a computational structure by which material and other sorts of spatial or structural behaviors can be activated within a generative design environment.
series ACADIA
type normal paper
email
last changed 2022/06/07 07:54

_id ecaade2014_086
id ecaade2014_086
authors Ahmed Sarhan and Peter Rutherford
year 2014
title Integrating Sustainability in the Architectural Design Education Process - Taxonomy of Challenges and Guidelines
source Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 323-332
doi https://doi.org/10.52842/conf.ecaade.2014.1.323
wos WOS:000361384700032
summary The last decade have seen substantial calls and increasing pressure for developing an integrated design teaching framework, where sustainability is an imperative priority. This paper focuses on presenting a taxonomy of the main challenges encountered within the educational domain, in the attempt to reach an effective integration. The paper also presents a set guidelines to address and try to resolve the noted challenges. As the use of Building Performance Simulation (BPS) applications is a central approach in this process aiming to reach energy efficient buildings, the paper focuses on the shortcomings noted as a result of the use of these applications in the design studios, with particular emphasis on the thermal and lighting aspects of the simulation. The taxonomy presented is a summary of the findings from literature review, as well as the surveys results which were part of the author's research project discussed in the paper.
keywords Environmental design; building performance simulation; architectural design education
series eCAADe
email
last changed 2022/06/07 07:54

_id acadia18_216
id acadia18_216
authors Ahrens, Chandler; Chamberlain, Roger; Mitchell, Scott; Barnstorff, Adam
year 2018
title Catoptric Surface
source ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 216-225
doi https://doi.org/10.52842/conf.acadia.2018.216
summary The Catoptric Surface research project explores methods of reflecting daylight through a building envelope to form an image-based pattern of light on the interior environment. This research investigates the generation of atmospheric effects from daylighting projected onto architectural surfaces within a built environment in an attempt to amplify or reduce spatial perception. The mapping of variable organizations of light onto existing or new surfaces creates a condition where the perception of space does not rely on form alone. This condition creates a visual effect of a formless atmosphere and affects the way people use the space. Often the desired quantity and quality of daylight varies due to factors such as physiological differences due to age or the types of tasks people perform (Lechner 2009). Yet the dominant mode of thought toward the use of daylighting tends to promote a homogeneous environment, in that the resulting lighting level is the same throughout a space. This research project questions the desire for uniform lighting levels in favor of variegated and heterogeneous conditions. The main objective of this research is the production of a unique facade system that is capable of dynamically redirecting daylight to key locations deep within a building. Mirrors in a vertical array are individually adjusted via stepper motors in order to reflect more or less intense daylight into the interior space according to sun position and an image-based map. The image-based approach provides a way to specifically target lighting conditions, atmospheric effects, and the perception of space.
keywords full paper, non-production robotics, representation + perception, performance + simulation, building technologies
series ACADIA
type paper
email
last changed 2022/06/07 07:54

_id ecaade2023_51
id ecaade2023_51
authors Aman, Jayedi, Kim, Jong Bum and Verniz, Debora
year 2023
title AI-Integrated Urban Building Energy Simulation: A framework to forecast the morphological impact on daylight availability
source Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, pp. 369–378
doi https://doi.org/10.52842/conf.ecaade.2023.2.369
summary The research presents a computational framework to investigate the relationship between urban morphology and environmental performance metrics of buildings. Understanding how buildings interact with their surroundings is crucial in optimizing environmental performance. Current urban building energy simulation methods (UBES) often overlook the complex interaction between urban morphology and environmental performance across a diverse set of attributes, resulting in inaccuracies. The proposed framework integrates machine learning (ML) with physics-based simulations and includes Parametric Building Information Modeling, iterative physics-based simulations, Multi-Objective Optimization, and a graph neural network. The framework leverages the detailed analysis capabilities of physics-based simulations and the data processing strengths of ML to analyze urban morphological attributes. Evaluations indicate that the framework enhances prediction accuracy while considering the influence of urban morphology on environmental performance.
keywords Urban Morphology, Urban Building Energy Modeling, Graph Neural Networks, Sustainable Urban Development, Environmental Performance, Multi-objective Optimization
series eCAADe
email
last changed 2023/12/10 10:49

_id ecaaderis2023_37
id ecaaderis2023_37
authors Amini Behbahani, Peiman
year 2023
title Visualizing Dynamic and Highly Interactive Lighting
source De Luca, F, Lykouras, I and Wurzer, G (eds.), Proceedings of the 9th eCAADe Regional International Symposium, TalTech, 15 - 16 June 2023, pp. 119–128
summary As a defining factor in shaping people’s experience in architectural spaces, lighting is realistically visualized via a plethora of rendering options in CAD and BIM solutions. However, their outputs are usually static or limited to basic changes. Thus, they may not satisfactorily visualize many dynamic and interactive lighting scenarios, such as energy-saving smart windows and lights, engaging street illumination, and entertainment setups. With the increasing automation of human-building interaction (HBI), visualizing such interactions empowers researchers and students who are interested in experimenting with customized lighting setups. Moving in this direction, this paper presents the lighting features of Tames, an open-source Unity toolkit developed by the author that visualizes dynamic and interactive elements in virtual environments without a need for programming. With Tames, the designers can navigate and interact with the design from the perspective of an occupant with the lighting and other elements in real-time manually or automatically. The workflow and capabilities of Tames are demonstrated by its application in the context of concert hall project designed by a student. This author argues that the availability and user-friendliness of this tool will contribute to architectural pedagogy and research. It allows students and researchers to visualize a wider variety of interactive designs and cases easier and, as an enabling tool, it may encourage them to explore and experiment with dynamic and interactive lighting.
keywords : Lighting, Interactive architecture, Unity, Human Building Interaction, 3D Visualization
series eCAADe
email
last changed 2024/02/05 14:28

_id sigradi2004_257
id sigradi2004_257
authors Antonio Serrato-Combe
year 2004
title Something 's gotta give' architectural animations
source SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary Architectural animations are like Harry Langer, a fifty-something entertainment mogul played by best actor nominee Jack Nicholson in the film Something.s Gotta Give. They.ve been surrounded by plenty of pathetic spiritless gimmicks. And, like Harry in the film, they have suffered a heart attack. Harry did not die. Architectural animations are still around, barely. Something.s wrong with them. When Harry begins to recover, he.s surprised to find himself growing fond of a woman his own age (played by best actress nominee Dianne Keaton). This is precisely what should happen to architectural animations. They need to come to terms with more mature attitudes and approaches. This paper presents a new and different approach to architectural animations. In ninety nine percent of the cases, architectural animations have been produced at the end of the design process, just when architects or architecture students are ready to present their schemes to an audience or client group. All design decisions have been made. All aspects of the architectural solutions have been set. Tectonic qualities, lighting schemes, construction approaches, everything has been cast in stone. The animation is simply shown as a public relations gesture to broadcast to the audience that the design team is digitally savvy and uses the latest technologies. The proposition contained herein is that animations be used throughout the design process, that is, from beginning to end.
series SIGRADI
last changed 2016/03/10 09:47

_id bcf7
authors Arvin, Scott A. and House, Donald H.
year 2002
title Modeling architectural design objectives in physically based space planning
source Automation in Construction 11 (2) (2002) pp. 213-225
summary Physically based space planning is a means for automating the conceptual design process by applying the physics of motion to space plan elements. This methodology provides for a responsive design process, which allows a designer to easily make decisions whose consequences immediately propagate throughout the design. It combines the speed of automated design methods with the flexibility of manual design methods, while adding a highly interactive quality and a sense of collaboration with the design itself. In our approach, the designer creates a space plan by specifying and modifying graphic design objectives rather than by directly manipulating primitive geometry. The plan adapts to the changing state of objectives by applying the physics of motion to its elements. For design objectives to affect a physically based space plan, they need to apply appropriate forces to space plan elements. Space planning can be separated into two problems, determining topological properties and determining geometric properties. Design objectives can then be categorized as topological or geometric objectives. Topological objectives influence the location of individual spaces, affecting how one space relates to another. Geometric objectives influence the size and shape of space boundaries, affecting the dimensions of individual walls. This paper focuses on how to model a variety of design objectives for use in a physically based space planning system. We describe how topological objectives, such as adjacency and orientation can be modeled to apply forces to space locations, and how geometric objectives, such as area, proportion, and alignment, can be modeled to apply forces to boundary edges.
series journal paper
email
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22

_id f317
authors Arvin, Scott A. and House, Donald H.
year 1999
title Modeling Architectural Design Objectives in Physically Based Space Planning
source Media and Design Process [ACADIA ‘99 / ISBN 1-880250-08-X] Salt Lake City 29-31 October 1999, pp. 212-225
doi https://doi.org/10.52842/conf.acadia.1999.212
summary Physically based space planning is a means for automating the conceptual design process by applying the physics of motion to space plan elements. This methodology provides for a responsive design process, which allows a designer to easily make decisions whose consequences immediately propagate throughout the design. It combines the speed of automated design methods with the flexibility of manual design methods, while adding a highly interactive quality and a sense of collaboration with the design itself. In our approach, the designer creates a space plan by specifying and modifying graphic design objectives rather than by directly manipulating primitive geometry. The plan adapts to the changing state of objectives by applying the physics of motion to its elements. For design objectives to have an effect on a physically based space plan, they need to be able to apply appropriate forces to space plan elements. Space planning can be separated into two problems, determining topological properties and determining geometric properties. Design objectives can then be categorized as topological or geometric objectives. Topological objectives influence the location of individual spaces, affecting how one space relates to another. Geometric objectives influence the size and shape of space boundaries, affecting the dimensions of individual walls. This paper focuses on how to model a variety of design objectives for use in a physically based space planning system. We describe how topological objectives, such as adjacency and orientation, can be modeled to apply forces to space locations, and how geometric objectives, such as area, proportion, and alignment, can be modeled to apply forces to boundary edges.
series ACADIA
email
last changed 2022/06/07 07:54

_id 89bb
authors Ataman, Osman and Richey, Thomas
year 1999
title ArchiDATA: A Hypermedia Tool for Architecture
source III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 496-500
summary Design is a cooperative activity at several levels. At one level, clients, architects, financiers, and construction engineers and contractors, all play important roles in creating the design for the building. At another level, the design team may contain architects, interior and landscape designers, lighting experts, heating, ventilation, and air-conditioning experts, etc. At a third level, individual architects cooperate with computer-based design tools in creating portions of a complex design. This paper describes an ongoing project called ArchiDATA, in which we are developing a computational Case-Based Design Aid (CBDA) for architectural design. This project, which is collaboration between cognitive scientists and architectural researchers, builds on an artificial intelligence paradigm called case-based reasoning and work in post-occupancy evaluation and other case study research in architecture.
series SIGRADI
email
last changed 2016/03/10 09:47

_id ijac20108401
id ijac20108401
authors Attar, Ramtin; Robert Aish, Jos Stam, et al.
year 2010
title Embedded Rationality: A Unified Simulation Framework for Interactive Form Finding
source International Journal of Architectural Computing vol. 8 - no. 4, p. 39
summary This paper describes embedded rationality as a method for implicitly combining fabrication constraints into an interactive framework for conceptual design. While the concept of ‘embedded rationality’ has been previously discussed in the context of a parametric design environment, we employ this concept to present a novel framework for dynamic simulation as a method for interactive form-finding. By identifying categories of computational characteristics, we present a unified physics-solver that generalizes existing simulations through a constraint-based approach. Through several examples we explore conceptual approaches to a fixed form where the resulting effects of interacting forces are produced in real-time. Finally, we provide an example of embedded rationality by examining a constraint-based model of fabrication rationale for a Planar Offset Quad (POQ) panelization system.
series journal
last changed 2019/05/24 09:55

_id lasg_whitepapers_2019_051
id lasg_whitepapers_2019_051
authors Awad, Michael
year 2019
title In Theoretical Physics; PB, IvH, and the LASG
source Living Architecture Systems Group White Papers 2019 [ISBN 978-1-988366-18-0] Riverside Architectural Press: Toronto, Canada 2019. pp.051 - 062
summary Text in center of two horizontal images
keywords living architecture systems group, organicism, intelligent systems, design methods, engineering and art, new media art, interactive art, dissipative systems, technology, cognition, responsiveness, biomaterials, artificial natures, 4DSOUND, materials, virtual projections,
email
last changed 2019/07/29 14:02

_id ascaad2007_039
id ascaad2007_039
authors Bakr, A.F.; I. Diab and D. Saadallah
year 2007
title Detecting Inefficient Lighting Solutions: Step-by-Step Geographic information system (GIS) Technique
source Em‘body’ing Virtual Architecture: The Third International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2007), 28-30 November 2007, Alexandria, Egypt, pp. 491-504
summary Outdoor lighting is used to illuminate roadways, parking lots, yards, sidewalks, public meeting areas, signs, work sites, and buildings. It provides us with better visibility and a sense of security. When well designed and properly installed, outdoor lighting can be and is very useful in improving visibility and safety and a sense of security, while at the same time minimizing energy use and operating costs. But, because nobody thought at this, most street lights shine light not only on the nearby ground, where is needed, but also miles away and skywards. Thus a large fraction of the light is lost, at consumer expense and without his/her consent. In the other hand, shortage in street light may cause more crimes as well as accidents. Most of the wasted or short light comes from the poorly designed street lights. Billboards, decorative lights, poorly shielded security lights are part of the problem too, but the main culprit for the waste and ugly glow one sees above one's head at nights is from the streetlights. Thus, recent computer technology gives us tools to be employed for testing the quality of light. Geographic Information System (GIS) software could be utilized to achieve that mission through applying mapping technique. This technique could analyze digital photographs and define light polluted areas as well as bad lighted. This paper reveals that step by step technique, which employs hybrid technologies to solve such problem for better planning decisions.
series ASCAAD
last changed 2008/01/21 22:00

_id ecaade2022_299
id ecaade2022_299
authors Bauscher, Erik, Philipp, Klaus Jan, Reisinger, Stefanie and Wortmann, Thomas
year 2022
title Reimagining Gego: Geometrical Reconstruction of Nubes, an Undocumented and Lost Sculpture from 1974
source Pak, B, Wurzer, G and Stouffs, R (eds.), Co-creating the Future: Inclusion in and through Design - Proceedings of the 40th Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2022) - Volume 2, Ghent, 13-16 September 2022, pp. 217–226
doi https://doi.org/10.52842/conf.ecaade.2022.2.217
summary This paper describes a method to understand and digitally reconstruct two sculptures by Gertrud Goldschmidt, a German-born, Venezuelan artist also called Gego. Gego is best known for her series of works called “Reticuláres”. These three-dimensional and open installations, mostly hanging freely in space, are playing with the concept and perception of space as well as challenging the definition of the traditional sculpture. The paper aims to generate information about two specific structures called “Nubes” (Clouds for Spanish) to assist in a physical reconstruction for a larger exhibition about Gego and to contribute to understanding Gego’s work process. Originally, the structures were suspended from a building's ceiling as an art installation in Caracas, 1974. There are three main challenges for this reconstruction: (1) The installations exhibit a complex three-dimensional geometry. (2) Scant drawings and photographs exist. (3) Gego might not have followed her initial drawings completely when building Nubes physically, because of the mentioned complexity and due to the light and bendable material properties of the employed material. The paper describes a computational process that recreates the object’s geometry in four steps: (1) Analyse all existing media of the structure. (2) Translate found information to the digital environment of Grasshopper. (3) Use a physical simulation to derive the end state of the hanging structure. (4) Optimize and tune the simulation with an optimization algorithm for better results. This paper demonstrates the usefulness of computational tools for reconstructing lost sculptures with little documentation. In this case, these tools allow a more accurate reconstruction and contribute to a fuller understanding of the design and realization process of Gego's Nubes.
keywords Geometry Reconstruction, Lost Art, Computational Design, Physics Simulation
series eCAADe
email
last changed 2024/04/22 07:10

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 446HOMELOGIN (you are user _anon_757638 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002