Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 17610

Reformat results as: short short into frame detailed detailed into frame

_id	b111
authors	De Vries, B., Achten, H.H., Coomans, M.K.D., Dijkstra, J., Fridqvist, S., Jessurun, A.J., Van Leeuwen, J.P., Orzechowski, M.A., Saarloos, D.J.M., Segers, N.M. and Tan, A.A.W.
year	2001
title	VR-DIS Research Programme Design Systems group
source	Proceedings of the Ninth International Conference on Computer Aided Architectural Design Futures [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, pp. 795-808
summary	This paper presents a summary of all on-going projects within the VR-DIS research programme at Eindhoven University of Technology.
keywords	Interactive Design System, Distributed Multi Disciplinary Design, Interactive Measurement Of User Reactions
series	CAAD Futures
email
last changed	2006/11/07 07:22

_id	158e
authors	De Vries, B., Van Leeuwen, J. and Achten, H. (Eds.)
year	2001
title	Computer Aided Architectural Design Futures 2001
source	Proceedings of the Ninth International Conference [ISBN 0-7923-7023-6] Eindhoven, 8-11 July 2001, 814 p.
summary	CAAD Futures is a bi-annual conference that aims to promote the advancement of computer-aided architectural design in the service of those concerned with the quality of the built environment. The conferences are organized under the auspices of the CAAD Futures Foundation, which has its secretariat at the Eindhoven University of Technology in the Netherlands. This volume provides state-of-the-art articles in the following areas: capturing design, information modelling, CBR techniques, Virtual Reality, CAAD education, (hyper) media, design evaluation, design systems development, collaboration, generation, design representation, knowledge management, form programming, simulation, architectural analysis, and urban design.
series	CAAD Futures
email
more	http://www.caadfutures.arch.tue.nl/2001
last changed	2003/04/02 10:52

_id	2c12
authors	De Vries, Bauke
year	1991
title	The Minimal Approach
source	Computer Integrated Future, CIB W78 Seminar. September, 1991
summary	Unnumbered. A distinction is made between data-exchange within a system and between systems. For the latter a datamodel is defined with a clear limited domain called: the minimal model. Moreover a procedure is shown for exchanging data using the minimal model
keywords	communication, standards, modeling, construction
series	CADline
last changed	1999/02/12 15:08

_id	5b63
authors	De Vries, Bauke
year	1996
title	Communication in the building industry: a strategy for implementing electronic information
source	Eindhoven University of Technology
summary	Information Technology in general and electronic communication in particular influence organizational structures. New communication media will change communication processes and business processes. To be able to analyze the influences of the new communication media, a clear view is required of the information flow and the information contents during a building project. Given this view, the question can be answered whether the business process and business organization fit the actual information needs. From the information flow frequency and the information contents, the most appropriate storage structure and transfer medium can be determined. The goal of this thesis is to create a formal description of the information exchange process during a building project, to provide the clear view as stated above.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	74ac
authors	De Vries, Bauke
year	2000
title	Sketching in 3D
doi	https://doi.org/10.52842/conf.ecaade.2000.277
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 277-280
summary	Sketching in 3D is a design activity that requires a new approach to user interaction and geometric modeling in an architectural context. DDDoolz is an example of such a system used for mass study and spatial design. This paper describes the basic principles and the students’ experiences in a CAAD course.
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	ijac20031204
id	ijac20031204
authors	de Vries, Bauke; Achten, Henri; Orzechowski, Maciej; Tan, Amy; Segers, Nicole; Tabak, Vincent; Jessurun, Joran; Coomans, Marc
year	2003
title	The Tangible Interface: Experiments as an Integral Part of a Research Strategy
source	International Journal of Architectural Computing vol. 1 - no. 2
summary	The Human-Computer interface is crucial to good design support tools. It has to be non-interruptive and non-distracting, yet allow the architect to interact with the computer software. The physical reality of the interface, such as the shape and manipulability of devices like the mouse, keyboard, joystick, or data-glove, has to be mapped on actions and commands in the software. Already the current user interfaces are felt to be inadequate for a good support of design, and the functionality of design tools is growing, requiring even more and new physical interface devices. In this paper, we present research on new tangible interfaces for architectural design support. In particular, we focus on the research methodological question how to investigate such devices.The research strategy is introduced and discussed, after which concrete implementations of this strategy are shown. Based on this work, we conclude that the combination of interface and the context of its use in terms of design method and user needs form crucial aspects for such research and cannot be considered separately.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	ijac20064202
id	ijac20064202
authors	de Vries, Bauke; Buma, Sjoerd; Jessurun, Joran
year	2006
title	An Intuitive Interface for Building Management and Planning
source	International Journal of Architectural Computing vol. 4 - no. 2, 17-26
summary	Building management and planning professionals utilize database systems for administrative support, but these systems are inadequate for conveying architectural plans. In this article we describe the so-called Virtual Maquette that was developed at the Eindhoven University of Technology for the board of the University. The Virtual Maquette consists of a vertical display for 3D view and information of building stock, and an interactive horizontal display for manipulation of view and information. Interaction is implemented using infrared tracking of devices that are positioned on the desktop with the projected plan view. Through this interface the states of the buildings can be inspected at different periods in history and in the future. The support of multiple devices in a single environment is a technical challenge, but it provides a new interaction method for non-technical persons.
series	journal
last changed	2007/03/04 07:08

_id	caadria2009_320
id	caadria2009_320
authors	Schoch, Odilo
year	2009
title	Ubicomp-Kaizen
doi	https://doi.org/10.52842/conf.caadria.2009.215
source	Proceedings of the 14th International Conference on Computer Aided Architectural Design Research in Asia / Yunlin (Taiwan) 22-25 April 2009, pp. 215-224
summary	This paper describes the successful development of a design supporting method called ‘Ubicomp-Kaizen’ for the design of computerintegrated ‘smart’ buildings. The tool uses known methods of qualitymanagement of the car-manufacturing industry and integrates them into the architectural design process. By this, the CAAD-topics ‘design methodology’, ‘ubicomp/smart buildings’, ‘interactive architecture’ and ‘Building Information Model (BIM)’ are involved. In result it proves the successful integration and application of tools known from the product development industry such as ‘Quality-Function-Deployment (QFD)’ and ‘Failure Mode and Effects Analyze (FMEA)’ within the iterative building design. The outlook formulates a side-result which is the setup of a digital decision supporting tool and the extension of the IFC-definitions in order to integrate aspects of user-interaction and ubicomp."
keywords	design processing, building information modelling (BIM), methodology, sustainability, ubicomp, interdisciplinary
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2008_8_session1b_068
id	caadria2008_8_session1b_068
authors	Schoch, Odilo and Peter Russell
year	2008
title	Kanban as a Supporting Tool for the SUSTAINABLE Design and Operation of Smart Buildings The potential of the Toyota Production System in Architecture
doi	https://doi.org/10.52842/conf.caadria.2008.068
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 68-74
summary	This paper describes the translation of the process management tool ‘Kanban’ and its adjacent Toyota Production System into an architectural design supporting tool in the context of computer integrated buildings. The triggering question is: ‘How can architects handle requirements and services of ubiquitous computing in relation to their cursory knowledge about networked services and its unpredictable future development?’. The paper develops a system called ‘Ubicomp-Kanban’ based on the characteristics Toyota Production System. It is suitable for both design and operation of binary networked services in built environment in selected architectural scales and selected functions. The application of the system allows more precise planning and resource optimized operation of academic buildings. The paper does not intend to set up a new approach for building information models (BIM).
keywords	pervasive computing, smart buildings, resource optimization, simulation, sustainability, Toyota Production System, kaizen, kanban
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	e717
authors	De Vries, Mark and Wagter, Harry
year	1991
title	The First CAAD Package (sketch based cad)
source	Computer Aided Architectural Design Futures: Education, Research, Applications [CAAD Futures ‘91 Conference Proceedings / ISBN 3-528-08821-4] Zürich (Switzerland), July 1991, pp. 497-510
summary	In this paper a theory will be presented that can be used to develop a new type of CAD program. It supports architectural design and can be applied to the earliest stages of the design process. The theory is based on architectural knowledge and describes how sketched input can be used for CAAD programs. The theoretical backgrounds will be explained briefly.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	c2ed
authors	De Vries, Mark and Wagter, Harry
year	1990
title	A CAAD Model for Use in Early Design Phases
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 215-228
summary	In this paper we present a model for handling design information in the early design phases. This model can be used for representing both vague and exact defined information. The first part describes the difficulties involved in using CAD in the architectural design process and the characteristics of that process. Then we give a description of the design information and its representation during the design process. Next an overview of the architectural design process describes how design information is added and manipulated during the design process in order to achieve an effective result. Finally, we include a brief description of a simple prototype program to illustrate how this theory acts in practice.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	ecaade2007_197
id	ecaade2007_197
authors	Schoch, Odilo
year	2007
title	Challenges of Media Integrated Architecture
doi	https://doi.org/10.52842/conf.ecaade.2007.575
source	Predicting the Future [25th eCAADe Conference Proceedings / ISBN 978-0-9541183-6-5] Frankfurt am Main (Germany) 26-29 September 2007, pp. 575-580
summary	This paper presents an approach towards a categorization of existing multidimensional graphical output devices within the built environment as framework for future studies. As the near future will witness that every single part of a building be get digitally connected, the buildings themselves can be novel media for communication. The novel kind of spatial typology is seen as the main quality of this architectural element. This is because the architectural element is going beyond pure graphical content. Buildings and cities are about to become gigantic ‘displays’ without frames. Architects should be able to deal with this novel ‘material’. The discipline of CAAD can fill gaps as CAAD is merging technical and conceptual knowledge from traditional architecture and contemporary media technology.
keywords	Media architecture, pervasive computing, design education
series	eCAADe
email
last changed	2022/06/07 07:57

_id	6319
authors	De Waard, M.
year	1991
title	Computer Aided Conformance Checking
source	Computer Integrated Future, CIB W78 Seminar. September, 1991
summary	Unnumbered : ill. includes bibliography. In the building process a number of problems exist with regard to building regulations, causing the conformance checking process to be an island in the building process. This paper discusses an approach that enables us to perform computer aided conformance checking and to integrate the conformance checking process in the building process. The approach is based on the use of product models. This paper discusses theoretical as well as implementation aspects
keywords	CAD, performance, building, construction, codes, evaluation, integration
series	CADline
last changed	2003/06/02 13:58

_id	4b04
authors	De Wilde, W.P., Mollaert, M. and Buelinckx, H. (Ed.)
year	1983
title	Proceedings of the International Conference eCAADe 1983
doi	https://doi.org/10.52842/conf.ecaade.1983
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983
summary	In the beginning of the eighties, a few enthusiastic researchers, under the impulsion of Tom MAVER (director of the ABACUS group) and Rik SCHIJF (TH Delft) initiated a regular, if not formal, convention of people involved in the teaching of computer aided architectural design ECAADE in Europe. In 1982 a first meeting took place in Delft and, taking into consideration the member of attendants and the enthusiasm during this convention, it was decided that CAAD was definitely an important topic and that a more formal symposium was to be organised in the fall of 1983, in the University of Brussels. The positive evolution of CAAD, not only in educational institutions, but also in professional practice is not surprising: it is to be considered in the global frame of technological and organisational revolution actually taking place. As will be read in the outstanding contribution of the participants it is not a mere choice of increased productivity which attracts the architects; the CAAD techniques also release then from a serious burden : the production of technical drawings and administrative paperwork!
series	eCAADe
email
more	http://wwwtw.vub.ac.be/ond/memc/Staff/Patrick.htm
last changed	2022/06/07 07:49

_id	caadria2005_b_5a_b
id	caadria2005_b_5a_b
authors	De-Lun Huang, Shen-Guan Shih
year	2005
title	A Case-Based Decision Support System for Housing Refurbishment
doi	https://doi.org/10.52842/conf.caadria.2005.288x.r0c
source	CAADRIA 2005 [Proceedings of the 10th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 89-7141-648-3] New Delhi (India) 28-30 April 2005, vol. 2, pp. 288-299
summary	Effective communication is a key for ensuring quality of housing refurbishment. This paper provides a framework of decision support system for housing refurbishment that helps designers better communicate with tenants who generally lack expert knowledge and can not express their needs clearly. The framework is constructed using Case-Based Reasoning (CBR) for retrieving past similar cases to meet the challenges and demands of the present refurbishment project at hand. With the help of the system, users can retrieve past cases that match the users’ requirements and revise them to meet current needs. It can also be used as design criteria for evaluating the final product to ensure its conformance with the initial planning. A test case is used to demonstrate the system’s suitability. The effectiveness of this system is supported by a post-experiment evaluation and interview with the tenant concerning his satisfaction on the refurbishment.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	e5a2
authors	Debevec, P.
year	1998
title	Rendering synthetic objects into real scenes: Bridging traditional and image-based graphics with global illumination and high dynamic range photography
source	Proc. ACM SIGGRAPH 98, M. Cohen, Ed., 189–198
summary	We present a method that uses measured scene radiance and global illumination in order to add new objects to light-based models with correct lighting. The method uses a high dynamic range imagebased model of the scene, rather than synthetic light sources, to illuminate the newobjects. To compute the illumination, the scene is considered as three components: the distant scene, the local scene, and the synthetic objects. The distant scene is assumed to be photometrically unaffected by the objects, obviating the need for re- flectance model information. The local scene is endowed with estimated reflectance model information so that it can catch shadows and receive reflected light from the new objects. Renderings are created with a standard global illumination method by simulating the interaction of light amongst the three components. A differential rendering technique allows for good results to be obtained when only an estimate of the local scene reflectance properties is known. We apply the general method to the problem of rendering synthetic objects into real scenes. The light-based model is constructed from an approximate geometric model of the scene and by using a light probe to measure the incident illumination at the location of the synthetic objects. The global illumination solution is then composited into a photograph of the scene using the differential rendering technique. We conclude by discussing the relevance of the technique to recovering surface reflectance properties in uncontrolled lighting situations. Applications of the method include visual effects, interior design, and architectural visualization.
series	other
last changed	2003/04/23 15:50

_id	sigradi2003_112
id	sigradi2003_112
authors	Debona, Silvia
year	2003
title	La representación dentro de la representación (The Representation within the Representation)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	A reflection about of the concepts Reality and Virtuality from the analysis of mirror's use in selected works of Van Eyck, Velázquez, Magritte and Pistoletto, taking like central idea the relation model-representation and its projection on the artistic expressions arisen from the technology.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	acadia20_48
id	acadia20_48
authors	Schofield, Alex
year	2020
title	Coral Carbonate
doi	https://doi.org/10.52842/conf.acadia.2020.1.048
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 48-57.
summary	This work-in-progress paper describes a body of research that utilizes the invention and application of a novel method to 3D-print calcium carbonate (CaCO3). The resultant 3D-printed objects can be computationally optimized and used as a scaffold for the growth of various aquatic life that exists at the interface of soft edges and the built, specifically (but not limited to) coral polyps. Rather than utilizing materials designed for anthropocentric terrestrial environments, we can harness materials and forms native to aquatic ecosystems in combination with advanced computation and fabrication techniques to help foster applied research in service to healthier ecosystems and cohabitation. This paper introduces the novel application of a 3D-printed calcium carbonate, mimicking a similar material composition to that of coral, and describes the additive manufactured medium with regard to 3D powder-printing methodologies. Hypothesis and proposal of morphogenesis in surface and volume are identified as key factors for interface with aquatic organisms. Current and future applications are additionally exhibited through a combination of material composition, surface, and form as targeted intervention and artificial restoration for aquatic ecosystems. While our planet requires anthropocentric mitigation strategies for reduction of greenhouse gases that contribute to aquatic life’s greatest threats, we must simultaneously develop strategies for adaptation that immediately respond to the current realities of a changing climate.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	acadia22pr_160
id	acadia22pr_160
authors	Schofield, Alex; Considine, Megan; Rumrill, Dr. Steven
year	2022
title	Oyster Tiling: Augmented Ecological Topology
source	ACADIA 2022: Hybrids and Haecceities [Projects Catalog of the 42nd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-7-4]. University of Pennsylvania Stuart Weitzman School of Design. 27-29 October 2022. edited by M. Akbarzadeh, D. Aviv, H. Jamelle, and R. Stuart-Smith. 160-165.
summary	Oyster Tiling is a study that blends material science, computational design, advanced fabrication, and restoration ecology to produce a tiling substrate for recruitment of functionally extinct Olympia oysters at Coquille Point on Yaquina Bay in Oregon. We utilized a design methodology with careful consideration of the intervention at the scale of Micro (material), Meso (topological), and Macro (tiling/ deployment).
series	ACADIA
type	project
email
last changed	2024/02/06 14:06

_id	e20d
authors	Decker, J.
year	1993
title	Simulation methodologies for observing large-scale urban structures
source	Landscape and Urban Planning 26, pp. 231-250
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

For more results click below: