Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 2695

Reformat results as: short short into frame detailed detailed into frame

_id	cf2011_p051
id	cf2011_p051
authors	Cote, Pierre; Mohamed-Ahmed Ashraf, Tremblay Sebastien
year	2011
title	A Quantitative Method to Compare the Impact of Design Mediums on the Architectural Ideation Process.
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 539-556.
summary	If we compare the architectural design process to a black box system, we can assume that we now know quite well both inputs and outputs of the system. Indeed, everything about the early project either feasibility studies, programming, context integration, site analysis (urban, rural or natural), as well as the integration of participants in a collaborative process can all be considered to initiate and sustain the architectural design and ideation process. Similarly, outputs from that process are also, and to some extent, well known and identifiable. We are referring here, among others, to the project representations or even to the concrete building construction and its post-evaluation. But what about the black box itself that produces the ideation. This is the question that attempts to answer the research. Currently, very few research works linger to identify how the human brain accomplishes those tasks; how to identify the cognitive functions that are playing this role; to what extent they operate and complement each other, and among other things, whether there possibly a chain of causality between these functions. Therefore, this study proposes to define a model that reflects the activity of the black box based on the cognitive activity of the human brain. From an extensive literature review, two cognitive functions have been identified and are investigated to account for some of the complex cognitive activity that occurs during a design process, namely the mental workload and mental imagery. These two variables are measured quantitatively in the context of real design task. Essentially, the mental load is measured using a Bakan's test and the mental imagery with eyes tracking. The statistical software G-Power was used to identify the necessary subject number to obtain for significant variance and correlation result analysis. Thus, in the context of an exploratory research, to ensure effective sample of 0.25 and a statistical power of 0.80, 32 participants are needed. All these participants are students from 3rd, 4th or 5th grade in architecture. They are also very familiar with the architectural design process and the design mediums used, i.e., analog model, freehand drawing and CAD software, SketchUp. In three experimental sessions, participants were asked to design three different projects, namely, a bus shelter, a recycling station and a public toilet. These projects were selected and defined for their complexity similarity, taking into account the available time of 22 minutes, using all three mediums of design, and this in a randomly manner to avoid the order effect. To analyze the two cognitive functions (mental load and mental imagery), two instruments are used. Mental imagery is measured using eye movement tracking with monitoring and quantitative analysis of scan paths and the resulting number and duration of participant eye fixations (Johansson et al, 2005). The mental workload is measured using the performance of a modality hearing secondary task inspired by Bakan'sworks (Bakan et al.; 1963). Each of these three experimental sessions, lasting 90 minutes, was composed of two phases: 1. After calibrating the glasses for eye movement, the subject had to exercise freely for 3 minutes while wearing the glasses and headphones (Bakan task) to get use to the wearing hardware. Then, after reading the guidelines and criteria for the design project (¬± 5 minutes), he had 22 minutes to execute the design task on a drawing table allowing an upright posture. Once the task is completed, the subject had to take the NASA TLX Test, on the assessment of mental load (¬± 5 minutes) and a written post-experimental questionnaire on his impressions of the experiment (¬± 10 minutes). 2. After a break of 5-10 minutes, the participant answered a psychometric test, which is different for each session. These tests (¬± 20 minutes) are administered in the same order to each participant. Thus, in the first experimental session, the subject had to take the psychometric test from Ekstrom et al. (1978), on spatial performance (Factor-Referenced Cognitive Tests Kit). During the second session, the cognitive style is evaluated using Oltman's test (1971). Finally, in the third and final session, participant creativity is evaluated using Delis-Kaplan test (D-KEFS), Delis et al. (2001). Thus, this study will present the first results of quantitative measures to establish and validate the proposed model. Furthermore, the paper will also discuss the relevance of the proposed approach, considering that currently teaching of ideation in ours schools of architecture in North America is essentially done in a holistic manner through the architectural project.
keywords	design, ideation process, mental workload, mental imagery, quantitative mesure
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	c844
authors	Friedman, Yona
year	1971
title	The Flatwriter : Choice By Computer
source	Progressive Architecture. 1971. vol. 3: [4] p. : ill
summary	Developing his theories of the flexible city, the author devised the Flatwriter as a way to involve future inhabitants in planning their own apartments
keywords	CAD, architecture, applications, floor plans
series	CADline
last changed	1999/02/12 15:08

_id	1bbf
authors	Miller, W.R.
year	1971
title	Computer-aided space planning
source	introduction, DMG Newsletter 5: 6-18
summary	This paper describes the application of MATRAN-III, a computer program developed by the author, to planning the space for a branch bank in Southern California. MATRAN-III is used to identify clusters of elements within a set of interrelated elements. The program accepts any arbitrary listing of the elements and their proximal relations and creates an adjacency matrix. This matrix is block diagonalized yielding visually recognizable patterns which can be mapped into line-dot diagrams. These diagrams can then be presented to a designer providing him with a memory pattern from which we can begin laying out the geometric configuration of the space.
series	other
last changed	2003/04/23 15:50

_id	cf2011_p163
id	cf2011_p163
authors	Park, Hyoung-June
year	2011
title	Mass-Customization in the Design of 4,000 Bus Stops
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 265-278.
summary	In Hawaii, ‚"TheBus‚" has been a main transportation system since 1971. Considering the high cost of living in Hawaii and the absence of a rail system, the use of ‚"TheBus‚" has been an instrumental vein of the city life in Honolulu with rhythmical pauses at about 4,000 bus stops in Honolulu. However, existing undifferentiated bus stops are developed from a cost effective mass production system so that they have been problematic for satisfying specific needs from various site conditions. In this research, an integrated computational method of mass-customization for designing 4,000 bus stops is introduced. According to various site conditions, the design of each bus stop is customized. Unlike the mass‚Äêproduced bus stops commonly seen in cities today, the proposed computational method in this paper produces bus stop design outcomes that fit into the physical characteristics of the location in which they are installed. Mass-customization allows for the creation and production of unique or similar buildings and building components, differentiated through digitally‚Äêcontrolled variation (Kolarevic, 2003). The employment of a computational mass‚Äêcustomization in architectural design extends the boundary of design solutions to the satisfaction of multi-objective requirements and unlimited freedom to search alternative solutions (Duarte, 2001; Caldas, 2006). The computational method developed in this paper consists of 1) definition of a prototype, 2) parametric variation, 3) manual deformation, and 4) simulation based deformation. The definition of a prototype is the development of a basic design to be transformed for satisfying various conditions given from a site. In this paper, the bus stop prototype is developed from the analysis of more than 300 bus stops and the categorization of the existing bus stops according to their physical conditions, contextual conditions, climatic conditions, and existing amenities. Based upon the outcome of the analysis, the design variables of a bus stop prototype are defined. Those design variables then guide the basic physical parameters for changing the physical configuration of the prototype according to a given site. From this, many possible design outcomes are generated as instances for further developments. The process of manual deformation is where the designer employs its intuition to develop the selected parametric variation. The designer is compelled to think about the possible implication derived from formal variation. This optional process allows every design decision to have a creative solution from an individual designer with an incidental quality in aesthetics, but substantiated functional quality. Finally the deformation of the selection is guided and controlled by the influence of sun direction/ exposure to the selection. The simulation based deformation starts with the movement of the sun as the trigger for generating the variations of the bus stop prototype. The implementation of the computational method was made within the combination of MEL (Maya Enbedded Language), autodesk MAYA and Ecotect environment.
keywords	mass-customization, parametric variation, simulation based deformation
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	31f5
authors	Alfares, M. and Seireg, A.
year	1996
title	An integrated system for computer-aided design and construction of reinforced concrete buildings using modular forms
source	Automation in Construction 5 (4) (1996) pp. 323-341
summary	The study reported in this paper investigates the feasibility of automating the on-site construction of reinforced concrete residential buildings. The basic construction tasks are identified, analyzed and modified with a view towards potential for automation. Emphasis is placed on developing modular forms that facilitate automation. The majority of work in the field of construction robotics has focused on the adaptation of existing industrial robots to automate traditional construction processes. This paper outlines a computer-aided construction system approach specially suited for integrating design and implementation by on-site robots. A Computer-Integrated Construction (CIC) system, similar to CIM, is developed that includes a CIC data-base, a construction design system, a construction production/process planning system, and a robotics execution system. This approach is intended to minimize the redesign effort as well as the need for on-site manual work.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	sigradi2015_8.81
id	sigradi2015_8.81
authors	Alvarado, Rodrigo García; Lobos, Danny; Nope, Alberto; Tinapp, Frank
year	2015
title	BIM + UAV Assessment of Roofs’ Solar Potential
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 336-340.
summary	This paper describes a novel method for determining the capacity to generate solar energy integrated into the roofs of buildings by aerial survey using UAVs and BIM models for sizing the covering surfaces and integration of solar panels. Various digital procedures are enchained like planning of trajectories, image processing, geometric reconstitution, simulation of solar radiation and calculation of energy generation to promote on-site installation of clean energy sources in existing buildings, to ensure a more sustainable habitat.
keywords	BIM, UAV, Solar Energy, Sustainable Building
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2008_49_session5a_399
id	caadria2008_49_session5a_399
authors	Anuradha, V.; Minal Sabnis, Vennila Thirumavalavn
year	2008
title	Voronoi diagram Voro [Schemata]: Application of interactive weighted voronoi diagrams as an alternate master-planning framework for business parks.
source	CAADRIA 2008 [Proceedings of the 13th International Conference on Computer Aided Architectural Design Research in Asia] Chiang Mai (Thailand) 9-12 April 2008, pp. 399-408
doi	https://doi.org/10.52842/conf.caadria.2008.399
summary	This paper explores the application of Interactive Weighted Voronoi diagrams in business park master plans through site specific testing, derivation of zoning parameters and creation of an applet.
keywords	Weighted Voronoi diagrams, 3D Voronoi grids, Alternative Planning frameworks for architectural design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2016_023
id	ascaad2016_023
authors	Ayoub, Mohammed
year	2016
title	Associative Parametric Urbanism - A computational approach to parameterization of conceptual design phase
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 207-216
summary	Urban planning projects usually comprise a complex set of objectives that needs to be addressed by developing a number of proposals. This requires a lot of repetitive steps resulting in fewer and slowly-developed design alternatives. To address the limitations of the existing system, this research introduces the merge of associative parametric design tools with the conceptual design phase of urban planning process to propose a Parameterized Conceptual Design Phase. The developed Associative Algorithm within the proposed phase represents a computational approach that translates a site’s settings into local attractors to define urban fabric, and provide the designer with variations for optimal solutions. The Informal Settlement of Ezbet El Matar, Alexandria, is selected as the case study of this approach.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ecaade2018_219
id	ecaade2018_219
authors	Bai, Nan, Ye, Wenqia, Li, Jianan, Ding, Huichao, Pienaru, Meram-Irina and Bunschoten, Raoul
year	2018
title	Customised Collaborative Urban Design - A Collective User-based Urban Information System through Gaming
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 419-428
doi	https://doi.org/10.52842/conf.ecaade.2018.1.419
summary	As we step into a new data-based information age, it is important to get citizens involved in the whole design process. Our research tries to build up a user-based urban information system by collecting the data of neighborhood land use preference from all the residents through gaming. The result of each individual decision will be displayed in real time using Augmented Reality technology, while the collective decision dataset will be stored, analyzed and learnt by computer, forming an optimal layout that meets the highest demand of the community. A pre-experiment has been conducted in a. an abstract virtual site and b. an existing site by collecting opinions from 122 participants, which shows that the system works well as a new method for collaborative design. This system has the potential to be applied both in realistic planning processes, as a negotiation toolkit, and in virtual urban forming, in the case of computer games or space colonization.
keywords	Collaborative Design; Customization; Urban Design; Gaming; Information System
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2009_mustapha_ben_hamouche
id	ascaad2009_mustapha_ben_hamouche
authors	Ben-Hamouche, Mustapha
year	2009
title	Gis in Architectural Education: Design as a place-making process
source	Digitizing Architecture: Formalization and Content [4th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2009) / ISBN 978-99901-06-77-0], Manama (Kingdom of Bahrain), 11-12 May 2009, pp. 393-407
summary	Responsiveness to site conditions and environment is one of the axioms of architectural design. However, most students’ design is made in a non-geo-coordinated cyberspace through CAAD design and thus leading to “flying” proposals” that are not attached to the context. GIS teaches students in architecture to initially refer to real locations as the space in which they design is geo-coordinated and provides the wider context of the project. Along the design process, the project surroundings from macro scale; that is the globe, to the micro-scale that is reflected in the existing buildings, the road network and the topography are constantly present. At the end stage, the project is seen not as a free standing building but rather as an integral part in a real place on Earth. The 3-D urban visualization gives the possibility of evaluating the degree of success of place-making and the fitness of the project to its context. The aim of the paper is to present how a GIS course can support CAAD and improve the architectural design process as well as the quality of the design output towards a contextual architecture. The paper is based on the experience of the author who is architects and urban planner, in teaching design studios and Urban Planning based on GIS as an elective course to graduating students in architecture at the University of Bahrain. It presents an alternative method that is called Permanent Presence of the Real World PPRW.
series	ASCAAD
email
last changed	2009/06/30 08:12

_id	2ccf
authors	Brown, A., Gavin, L., Berridge, Ph., Achten, H. and Knight, M.
year	2000
title	Virtual eCAADe Galleries and Meeting Places
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 157-163
doi	https://doi.org/10.52842/conf.ecaade.2000.157
summary	This paper describes the first steps taken to establish a virtual gallery as a device to enable the display and sharing of information, both within the eCAADe organisation and for other interested or related parties. Initially an important role of the gallery would be to display student work from all of the member states of eCAADe. With this feature established we might then want to move on to providing additional elements within the world which could allow exchange of views; discussion; points of contact; and the provision of educational and research information relating to CAAD. The paper will describe the potential of the different kinds of gallery that might be appropriate. The worlds reviewed will deal with sites which offer a collaborative environment represented in a three dimensional form. We will comment on some specific relevant examples, and review their appropriateness against a set of relevant criteria. The proposals that we make will be open to review and comment by eCAADe members before a fully working site is constructed.
keywords	eCAADe, Virtual Meeting Places, Internet
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:54

_id	caadria2020_118
id	caadria2020_118
authors	Chow, Ka Lok and van Ameijde, Jeroen
year	2020
title	Generative Housing Communities - Design of Participatory Spaces in Public Housing Using Network Configurational Theories
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 283-292
doi	https://doi.org/10.52842/conf.caadria.2020.2.283
summary	This research-by-design project explores how public housing estates can accommodate social diversity and the appropriation of shared spaces, using qualitative and quantitative analysis of circulation networks. A case study housing estate in Hong Kong was analysed through field observations of movements and activities and as a site for the speculative re-design of shared spaces. Generative design processes were developed based on several parameters, including shortest paths, visibility integration and connectivity integration (Hillier & Hanson, 1984). Additional tools were developed to combine these techniques with optimisation of sunlight access, maximisation of views for residential towers and the provision of permeability of ground level building volumes. The project demonstrates how flexibility of use and social engagement can constitute a platform for self-organisation, similar to Jane Jacobs' notion of vibrant streets leading to active and progressive communities. It shows how computational design and configurational theories can promote a bottom-up approach for generating new types of residential environments that support participatory and diverse communities, rather than a conventional top-down approach that is perceived to embody mechanisms of social regimentation.
keywords	Urban Planning and Design; Network Configuration; Community Space and Social Interaction; Hong Kong Public Housing
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ddss9420
id	ddss9420
authors	Christie, Colin Ian
year	1994
title	User Interfaces and Systems for Remote Design Working on ISDN Systems
source	Second Design and Decision Support Systems in Architecture & Urban Planning (Vaals, the Netherlands), August 15-19, 1994
summary	This paper will discuss the requirements and possible configurations of user interfaces suitable for remote working multi-disciplinary design practices. Telecom companies throughout Europe are making heavy investments in digital communication technology (ISDN). The networks being created will form a standard method of high speed data transfer which can be readily accessed by any computer hardware platform. There are great opportunities for remote working by design groups, not simply sharing data but also interactive working and video communications. Digital communications provide the electronic arterial system to the new field of remote computing,whilst cheap and effective hardware and software support systems provide readily usable platforms on which to build remote multi-disciplinary design practices where the exploitation of specialistknowledge and skills is not limited by traditional methods of communication. ISDN networks allow real time video, voice and design software interaction - indeed, everything except the designer's physical presence. However as with all computer technology and indeed communications technology the user interface which gives access and control is vitally important. The user interface should provide the following features: be transparent to the user and simple and reliable to operate; allow an interactive window/s into the remote site's design information whatever the type of application being dealt with; carry out data compression, file transfer and file management procedures with minimum input from the user; cause no conflicts with design software or secondary applications;be able to access different platforms.
series	DDSS
last changed	2003/08/07 16:36

_id	caadria2023_234
id	caadria2023_234
authors	Chundeli, Faiz Ahmed and Berger, Tania
year	2023
title	Thermal Performance Evaluation of Low-Income Housing Units Using Numerical Simulation
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 645–654
doi	https://doi.org/10.52842/conf.caadria.2023.1.645
summary	The thermal performance of buildings is measured as heat energy transfer between the buildings and the surrounding environment, and there are several heat exchange possibilities. This paper presents the thermal performance of 12 non-air-conditioned low-income single dwellings in warm-humid climates. The Building and material characteristics of the dwellings, including field measurements of the 12 cases, were meticulously documented through a primary survey. The critical indicator for assessing and evaluating the performance of the dwelling unit was hourly simulated indoor temperature data for an entire year. Further, potential planning and design components, viz. building orientation, roof and wall insulation, window size, property & locations, clerestory window, increased floor-to-ceiling height, site setback, and roof profile, were iterated to improve the thermal performance of low-income dwellings. Indoor temperatures as high as 45.9 C were recorded, the mean indoor temperature for the summer months (March-July) was over 34.64 C, and it was always higher than 30 C for the rest of the month. The findings show that the inhabitants are subjected to temperatures exceeding 34 degrees Celsius for more than half of the year. The paper concludes with some suggested design measures to improve the thermal performance of low-income houses. The study also emphasizes the importance of refined early design phase assessment and decision-making to improve the indoor thermal environment.
keywords	Thermal performance, low-income housing, building simulation, heatwaves, natural ventilation
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	ijac202220307
id	ijac202220307
authors	Cicek, Selen; Gozde Damla Turhan
year	2022
title	Computational generation of a spatial layout through syntactical evaluation and multi-objective evolutionary optimization
source	International Journal of Architectural Computing 2022, Vol. 20 - no. 3, pp. 610–629
summary	The space layout problem encompasses challenges that rely on a diverse range of contexts regarding urban planning and architectural design, during the traditional design phases which require immense effort and time for the evaluation of the spatial elements’ characteristic needs. In order to eliminate the burden of considering all multidimensional design aspects at the same time, this research presents a three-bodied computational method for locating the spaces of the given architectural design program in a project site, according to the defined list of design objectives and criteria. Besides the determination of the layout according to the requirements of the spatial elements, this research proposes an integration of the space syntax theory’s analytical compounds in terms of Justified Graph Analysis and Integration Values as the fitness criteria for the multi-objective evolutionary optimization in the computational model. To satisfy the integrity levels of each various characterized element within site organization, that are implied inherently by the architectural design program and generate a sustainable space network layout for the project site
keywords	computational space layout, space syntax, spatial organization, spatial network, evolutionary algorithms
series	journal
last changed	2024/04/17 14:30

_id	caadria2017_042
id	caadria2017_042
authors	Coorey, Ben and Coorey, Anycie
year	2017
title	Generating Urban Form
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 261-269
doi	https://doi.org/10.52842/conf.caadria.2017.261
summary	Modern design of urban forms is venturing towards performative, site-specific architecture that are formed according to the attributes of its urban context. Parametric modelling techniques offer designers the ability to embed generative mechanisms into the design process to allow performance based design. This paper focuses on the development of a synthesis model that generates an Urban Form schema using computational design principles. The design system illustrates a rule-based systematic approach to urban form generation and is a precursor to the automatic exploration of urban forms based on design analytics and evaluation of urban metrics. The role of the architect begins to shift from the designer of objects to the designer of processes with urban planning following a trajectory of data-generated and contextual specific design.
keywords	Parametric Modelling; Urban Modelling; Scripting; Urban Analysis
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2018_403
id	ecaade2018_403
authors	Coraglia, Ugo Maria, Wurzer, Gabriel and Fioravanti, Antonio
year	2018
title	ORe – A simulation model for Organising Refurbishments
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 605-610
doi	https://doi.org/10.52842/conf.ecaade.2018.2.605
summary	The problem of interferences due to the refurbishing activities of a complex building, carried out in parallel with the daily activities that characterize it, is not to be underestimated, especially when talking about a hospital structure. Consequently, the benefits that would be obtained by reducing the presence of construction activities result important in terms of safety and health of users, above all hospital patients. Setting the best solution of Gantt in the early stages of planning can be a winning strategy, as well as being able to recognize the safest and fastest path (e.g. predicting which is the fastest way to reach the rooms taken into consideration by the refurbishment). At the same time, being able to check which activities are most penalized by the presence of the construction site and to set which are essential for the survival of the activities that characterize the environment to be refurbished, e.g. the hospital ward, is a valid support tool for the healthcare staff. The proposed tool aims, on the one hand, to help designers by proposing the best possible Gantt solutions in relation to the management of daily activities that can not be suspended and on the other hand to support healthcare staff in the organization of these latter.
keywords	Refurbishment; Complex building; Construction site; Space syntax; Bubble diagram; Gantt
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac202321109
id	ijac202321109
authors	Correa, Sara Dotta; Carlos Eduardo Verzola Vaz
year	2023
title	A shape grammar for the spontaneous occupation settled in fishing villages: The case of Garopaba, Brazil
source	International Journal of Architectural Computing 2023, Vol. 21 - no. 1, pp. 158–187
summary	This work presents the second stage of a larger study which conducted the elaboration of a shape grammar based on the analysis of the remaining fishing villages in the Santa Catarina State, Southern Brazil. The architectural and formal structure of the villages provide a perspective of the constructive methods and features embedded in the spatial arrangements and represent a local cultural heritage site. The aim of the present work relies on unraveling its spatial resources using a shape grammar approach, in order to contribute to the preservation of a distinct culture, and is intended to be used to safeguard its formal language planning. Also, through the analytical grammar, it would be possible to contribute in framing design guidelines regarding the remaining villages, to keep it steady on the traditional context, safeguarding its peculiar character. As such, the method in this body of work considered the analysis resulting from the first stage, in order to develop an analytical shape grammar using Garopaba village as a case of study. This stage involved the establishment of a formal language for the analytical grammar, consisting of initial form, vocabulary, families, and spatial relations, and thus, a series of rules emerged, decoding the composition arrangements. The results involved the verification of the considered parameters, confirming the existence of spatial patterns. Thus, it was possible to conclude that the grammar contributes to identifying the occupation process occupation and the spatial patterns which underlies an artisanal fishing village. Also, the grammar allowed the creation of urban compositions similar to the structure of traditional fishing communities in Santa Catarina, generating different discussions regarding the analytical approach towards fishing villages arrangements, compared to the examples studied, specifically, in Garopaba city
keywords	shape grammar, urban form, fishing villages, Santa Catarina
series	journal
last changed	2024/04/17 14:30

_id	78f0
authors	Cotton, J.F.
year	1996
title	Solid modeling as a tool for constructing solar envelopes
source	Automation in Construction 5 (3) (1996) pp. 185-192
summary	This paper presents a method for constructing solar envelopes in site planning using a 3D solid-modeling program. The solar envelope for a site is a mechanism for ensuring that planning regulations on the solar access rights of others are observed. In this application, solid modeling offers the advantage of being a general-purpose tool having the capability to handle sets of site conditions that are complex. The paper reviews the concept of solar envelopes and demonstrates the method of application of solar envelope construction to a site. Techniques for displaying the constraints on building sections imposed by a solar envelope are presented.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c3d0
authors	Cotton, John
year	1995
title	Solid Modeling as a Tool for Constructing Solar Envelopes
source	Computing in Design - Enabling, Capturing and Sharing Ideas [ACADIA Conference Proceedings / ISBN 1-880250-04-7] University of Washington (Seattle, Washington / USA) October 19-22, 1995, pp. 253-260
doi	https://doi.org/10.52842/conf.acadia.1995.253
summary	This paper presents a method for constructing solar envelopes in site planning using a 3D solid-modeling program as the tool. The solar envelope for a building site is a mechanism for ensuring that planning regulations on the solar access rights of other sites are observed. In this application, solid modeling offers the practical advantage of being a general-purpose tool having the capability to handle sets of site conditions that are quite complex. The paper reviews the concept of solar envelopes and demonstrates the method of application of solar-envelope construction to a site defined to avoid overly simplifying conditions. Techniques for displaying the constraints on building sections imposed by a solar envelope are presented as well.
series	ACADIA
email
last changed	2022/06/07 07:56

For more results click below: