Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 1931

Reformat results as: short short into frame detailed detailed into frame

_id	7f71
authors	De Landa, Manuel
year	1998
title	Meshworks, Hierarchies and Interfaces
source	Virtual Dimension Ed. Beckmann, J., Princeton Architectural Press, NewYork
summary	The world of interface design is today undergoing dramatic changes which in their impact promise to rival those brought about by the use of the point-and-click graphical interfaces popularized by the Macintosh in the early 1980's. The new concepts and metaphors which are aiming to replace the familiar desk-top metaphor all revolve around the notion of semi-autonomous, semi-intelligent software agents. To be sure, different researchers and commercial companies have divergent conceptions of what these agents should be capable of, and how they should interact with computer users. But whether one aims to give these software creatures the ability to learn about the users habits, as in the non-commercial research performed at MIT autonomous agents group, or to endow them with the ability to perform transactions in the users name, as in the commercial products pioneered by General Magic, the basic thrust seems to be in the direction of giving software programs more autonomy in their decision-making capabilities.
series	other
last changed	2003/04/23 15:50

_id	ddss2004_ra-33
id	ddss2004_ra-33
authors	Diappi, L., P. Bolchim, and M. Buscema
year	2004
title	Improved Understanding of Urban Sprawl Using Neural Networks
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) Recent Advances in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Kluwer Academic Publishers, ISBN: 14020-2408-8, p. 33-49
summary	It is widely accepted that the spatial pattern of settlements is a crucial factor affecting quality of life and environmental sustainability, but few recent studies have attempted to examine the phenomenon of sprawl by modelling the process rather than adopting a descriptive approach. The issue was partly addressed by models of land use and transportation which were mainly developed in the UK and US in the 1970s and 1980s, but the major advances were made in the area of modelling transportation, while very little was achieved in the area of spatial and temporal land use. Models of land use and transportation are well-established tools, based on explicit, exogenouslyformulated rules within a theoretical framework. The new approaches of artificial intelligence, and in particular, systems involving parallel processing, (Neural Networks, Cellular Automata and Multi-Agent Systems) defined by the expression “Neurocomputing”, allow problems to be approached in the reverse, bottom-up, direction by discovering rules, relationships and scenarios from a database. In this article we examine the hypothesis that territorial micro-transformations occur according to a local logic, i.e. according to use, accessibility, the presence of services and conditions of centrality, periphericity or isolation of each territorial “cell” relative to its surroundings. The prediction capabilities of different architectures of supervised Neural networks are implemented to the south Metropolitan area of Milan at two different temporal thresholds and discussed. Starting from data on land use in 1980 and 1994 and by subdividing the area into square cells on an orthogonal grid, the model produces a spatial and functional map of urbanisation in 2008. An implementation of the SOM (Self Organizing Map) processing to the Data Base allows the typologies of transformation to be identified, i.e. the classes of area which are transformed in the same way and which give rise to territorial morphologies; this is an interesting by-product of the approach.
keywords	Neural Networks, Self-Organizing Maps, Land-Use Dynamics, Supervised Networks
series	DDSS
last changed	2004/07/03 22:13

_id	4990
authors	Gips, J. and Stiny, G.
year	1980
title	Production System and Grammars: a Uniform Characterization
source	Environment and Planning B. 1980. vol. 7: pp. 399-408 : tables. includes bibliography
summary	The common structure underlying production system formalisms is developed. A variety of production system formalisms are summarized in terms of this structure. The structure is useful both for understanding existing systems and for developing new ones
keywords	systems, shape grammars, theory
series	CADline
last changed	2003/06/02 13:58

_id	b04c
authors	Goerger, S., Darken, R., Boyd, M., Gagnon, T., Liles, S., Sullivan, J. and Lawson, J.
year	1996
title	Spatial Knowledge Acquisition from Maps and Virtual Environments in Complex Architectural Space
source	Proc. 16 th Applied Behavioral Sciences Symposium, 22-23 April, U.S. Airforce Academy, Colorado Springs, CO., 1996, 6-10
summary	It has often been suggested that due to its inherent spatial nature, a virtual environment (VE) might be a powerful tool for spatial knowledge acquisition of a real environment, as opposed to the use of maps or some other two-dimensional, symbolic medium. While interesting from a psychological point of view, a study of the use of a VE in lieu of a map seems nonsensical from a practical point of view. Why would the use of a VE preclude the use of a map? The more interesting investigation would be of the value added of the VE when used with a map. If the VE could be shown to substantially improve navigation performance, then there might be a case for its use as a training tool. If not, then we have to assume that maps continue to be the best spatial knowledge acquisition tool available. An experiment was conducted at the Naval Postgraduate School to determine if the use of an interactive, three-dimensional virtual environment would enhance spatial knowledge acquisition of a complex architectural space when used in conjunction with floor plan diagrams. There has been significant interest in this research area of late. Witmer, Bailey, and Knerr (1995) showed that a VE was useful in acquiring route knowledge of a complex building. Route knowledge is defined as the procedural knowledge required to successfully traverse paths between distant locations (Golledge, 1991). Configurational (or survey) knowledge is the highest level of spatial knowledge and represents a map-like internal encoding of the environment (Thorndyke, 1980). The Witmer study could not confirm if configurational knowledge was being acquired. Also, no comparison was made to a map-only condition, which we felt is the most obvious alternative. Comparisons were made only to a real world condition and a symbolic condition where the route is presented verbally.
series	other
last changed	2003/04/23 15:50

_id	0a4c
authors	Holt, R.C. and Hume, J.N.P.
year	1980
title	Programming Standard PASCAL
source	x, 381 p. Reston, Verginia: Reston Publishing Company, Inc., 1980. includes index
summary	A comprehensive look at data structures, records, files, pointers and more, for effective programming using PASCAL. A practical guide book from an introduction level through advanced coverage of numerical methods, assembly language programming and compiler construction
keywords	PASCAL, programming, languages, education
series	CADline
last changed	2003/06/02 13:58

_id	ddss2006-hb-187
id	DDSS2006-HB-187
authors	Lidia Diappi and Paola Bolchi
year	2006
title	Gentrification Waves in the Inner-City of Milan - A multi agent / cellular automata model based on Smith's Rent Gap theory
source	Van Leeuwen, J.P. and H.J.P. Timmermans (eds.) 2006, Innovations in Design & Decision Support Systems in Architecture and Urban Planning, Dordrecht: Springer, ISBN-10: 1-4020-5059-3, ISBN-13: 978-1-4020-5059-6, p. 187-201
summary	The aim of this paper is to investigate the gentrification process by applying an urban spatial model of gentrification, based on Smith's (1979; 1987; 1996) Rent Gap theory. The rich sociological literature on the topic mainly assumes gentrification to be a cultural phenomenon, namely the result of a demand pressure of the suburban middle and upper class, willing to return to the city (Ley, 1980; Lipton, 1977, May, 1996). Little attempt has been made to investigate and build a sound economic explanation on the causes of the process. The Rent Gap theory (RGT) of Neil Smith still represents an important contribution in this direction. At the heart of Smith's argument there is the assumption that gentrification takes place because capitals return to the inner city, creating opportunities for residential relocation and profit. This paper illustrates a dynamic model of Smith's theory through a multi-agent/ cellular automata system approach (Batty, 2005) developed on a Netlogo platform. A set of behavioural rules for each agent involved (homeowner, landlord, tenant and developer, and the passive 'dwelling' agent with their rent and level of decay) are formalised. The simulations show the surge of neighbouring degradation or renovation and population turn over, starting with different initial states of decay and estate rent values. Consistent with a Self Organized Criticality approach, the model shows that non linear interactions at local level may produce different configurations of the system at macro level. This paper represents a further development of a previous version of the model (Diappi, Bolchi, 2005). The model proposed here includes some more realistic factors inspired by the features of housing market dynamics in the city of Milan. It includes the shape of the potential rent according to city form and functions, the subdivision in areal submarkets according to the current rents, and their maintenance levels. The model has a more realistic visualisation of the city and its form, and is able to show the different dynamics of the emergent neighbourhoods in the last ten years in Milan.
keywords	Multi agent systems, Housing market, Gentrification, Emergent systems
series	DDSS
last changed	2006/08/29 12:55

_id	244d
authors	Monedero, J., Casaus, A. and Coll, J.
year	1992
title	From Barcelona. Chronicle and Provisional Evaluation of a New Course on Architectural Solid Modelling by Computerized Means
doi	https://doi.org/10.52842/conf.ecaade.1992.351
source	CAAD Instruction: The New Teaching of an Architect? [eCAADe Conference Proceedings] Barcelona (Spain) 12-14 November 1992, pp. 351-362
summary	The first step made at the ETSAB in the computer field goes back to 1965, when professors Margarit and Buxade acquired an IBM computer, an electromechanical machine which used perforated cards and which was used to produce an innovative method of structural calculation. This method was incorporated in the academic courses and, at that time, this repeated question "should students learn programming?" was readily answered: the exercises required some knowledge of Fortran and every student needed this knowledge to do the exercises. This method, well known in Europe at that time, also provided a service for professional practice and marked the beginning of what is now the CC (Centro de Calculo) of our school. In 1980 the School bought a PDP1134, a computer which had 256 Kb of RAM, two disks of 5 Mb and one of lO Mb, and a multiplexor of 8 lines. Some time later the general politics of the UPC changed their course and this was related to the purchase of a VAX which is still the base of the CC and carries most of the administrative burden of the school. 1985 has probably been the first year in which we can talk of a general policy of the school directed towards computers. A report has been made that year, which includes an inquest adressed to the six Departments of the School (Graphic Expression, Projects, Structures, Construction, Composition and Urbanism) and that contains interesting data. According to the report, there were four departments which used computers in their current courses, while the two others (Projects and Composition) did not use them at all. The main user was the Department of Structures while the incidence of the remaining three was rather sporadic. The kind of problems detected in this report are very typical: lack of resources for hardware and software and for maintenance of the few computers that the school had at that moment; a demand (posed by the students) greatly exceeding the supply (computers and teachers). The main problem appeared to be the lack of computer graphic devices and proper software.
series	eCAADe
email
last changed	2022/06/07 07:58

_id	4b32
authors	Nilsson, Nils J.
year	1980
title	Principles of Artificial Intelligence
source	xv, 476 p. : ill. Palo Alto, California: Tioga Pub. Co., 1980. includes bibliography: p. 429-465 and index
summary	Describes AI ideas based on general computational concepts involving the kind of data structures used, the types of operations performed on these data structures, and the properties of control strategies used by AI systems. The book is designed as a text
keywords	AI, education
series	CADline
last changed	2003/06/02 10:24

_id	e3c1
authors	Rasdorf, William J. and Fenves, Stephen J.
year	1980
title	Design Specification Representation and Analysis
source	Computing in Civil Engineering Conference Proceedings (2nd : 1980 : Baltimore, MD.). American Society of Civil Engineers, pp. 102- 111. CADLINE has abstract only
summary	The conventional structures of decision tables, information networks, and outlines define the current methodology for the representation and use of design specifications. This paper explores the relationships at the interfaces between these three representational tools. New analysis strategies are presented that provide flexibility at the lower boundary of the information network by converting decision tables to subnetworks within the information network and by compressing multiple subtables into larger tables representing higher- level nodes in the network. Both generation and compression of the information network provide flexibility in organizing a specification. The ability to both generate and compress nodes and subnodes establishes a mean of representing all the relations among the data items of a specification and gives one more direct control over the level of detail of the information network. As a direct consequence of the ability to generate new nodes, new classifiers can be progressively attached to the nodes of the subnetwork, as well as to the nodes in the information network. As a result, specification requirements are more logically identified by the outline and requirements and data items which were previously hidden within decision table conditions and actions are now directly accessible from the outline. Conversely, items inconsequential to the outline can be compressed into nodes and removed from the outline. A computer program is presented that implements these network transformations. The program accurately represents the interface between the network and the decision table
keywords	civil engineering, decision making, representation, analysis
series	CADline
last changed	2003/06/02 13:58

_id	acadia21_76
id	acadia21_76
authors	Smith, Rebecca
year	2021
title	Passive Listening and Evidence Collection
doi	https://doi.org/10.52842/conf.acadia.2021.076
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 76-81.
summary	In this paper, I present the commercial, urban-scale gunshot detection system ShotSpotter in contrast with a range of ecological sensing examples which monitor animal vocalizations. Gunshot detection sensors are used to alert law enforcement that a gunshot has occurred and to collect evidence. They are intertwined with processes of criminalization, in which the individual, rather than the collective, is targeted for punishment. Ecological sensors are used as a “passive” practice of information gathering which seeks to understand the health of a given ecosystem through monitoring population demographics, and to document the collective harms of anthropogenic change (Stowell and Sueur 2020). In both examples, the ability of sensing infrastructures to “join up and speed up” (Gabrys 2019, 1) is increasing with the use of machine learning to identify patterns and objects: a new form of expertise through which the differential agendas of these systems are implemented and made visible. I trace the differential agendas of these systems as they manifest through varied components: the spatial distribution of hardware in the existing urban environment and / or landscape; the software and other informational processes that organize and translate the data; the visualization of acoustical sensing data; the commercial factors surrounding the production of material components; and the apps, platforms, and other forms of media through which information is made available to different stakeholders. I take an interpretive and qualitative approach to the analysis of these systems as cultural artifacts (Winner 1980), to demonstrate how the political and social stakes of the technology are embedded throughout them.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	a2d4
authors	Timmer, H.G. and Stern, J.M.
year	1980
title	Computation of Global Geometric Properties of Solid Objects
source	Computer Aided Design November, 1980. vol. 12: pp. 301-304 : ill. includes bibliography.
summary	A computational scheme for determining global geometric properties of solid object models is presented. The method operates directly on the boundary representation of the model. The scheme is tested on a number of models produced by an experimental modeling system. Primitive objects combined for the tests are all represented in terms of parametric bicubic patches
keywords	objects, solid modeling, computation, B-rep, curved surfaces
series	CADline
last changed	2003/06/02 13:58

_id	452c
authors	Vanier, D. J. and Worling, Jamie
year	1986
title	Three-dimensional Visualization: A Case Study
source	Computer-Aided Architectural Design Futures [CAAD Futures Conference Proceedings / ISBN 0-408-05300-3] Delft (The Netherlands), 18-19 September 1985, pp. 92-102
summary	Three-dimensional computer visualization has intrigued both building designers and computer scientists for decades. Research and conference papers present an extensive list of existing and potential uses for threedimensional geometric data for the building industry (Baer et al., 1979). Early studies on visualization include urban planning (Rogers, 1980), treeshading simulation (Schiler and Greenberg, 1980), sun studies (Anon, 1984), finite element analysis (Proulx, 1983), and facade texture rendering (Nizzolese, 1980). With the advent of better interfaces, faster computer processing speeds and better application packages, there had been interest on the part of both researchers and practitioners in three-dimensional -models for energy analysis (Pittman and Greenberg, 1980), modelling with transparencies (Hebert, 1982), super-realistic rendering (Greenberg, 1984), visual impact (Bridges, 1983), interference clash checking (Trickett, 1980), and complex object visualization (Haward, 1984). The Division of Building Research is currently investigating the application of geometric modelling in the building delivery process using sophisticated software (Evans, 1985). The first stage of the project (Vanier, 1985), a feasibility study, deals with the aesthetics of the mode. It identifies two significant requirements for geometric modelling systems: the need for a comprehensive data structure and the requirement for realistic accuracies and tolerances. This chapter presents the results of the second phase of this geometric modelling project, which is the construction of 'working' and 'presentation' models for a building.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	3c96
authors	Kang, H., Anderson, S.D. and Clayton, M.J.
year	2001
title	Web4D: Challenges and Practices for Construction Scheduling
doi	https://doi.org/10.52842/conf.acadia.2001.132
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 132-141
summary	Research has demonstrated that four-dimensional computer aided design (4D CAD), in which a three-dimensional (3D) CAD model is animated through time, is useful in helping professionals understand the construction schedule. However, cumbersome processes to update a 4D CAD model, which involve changing geometry representations, changing schedules and bar charts, linking the geometry to the scheduling information, and generating animations, may discourage professionals from using 4D CAD in actual construction projects. A software prototype implementing 4D CAD in a Web environment overcomes limitations of current 4D CAD tools. This software permits editing of the construction schedule over the Internet and shows the revised construction sequence visually on a Web browser using 3D computer graphics. This software is composed of a database on a server, Active Server Pages (ASP) scripts, and a Java applet that was developed using Java 3D Application Programming Interface (API) and Java JDBC. The Java applet retrieves the 4D model at the appropriate level of completion over the Internet and allows users to navigate around the model on the Web browser. Web4D visualization software can help professionals to expedite the schedule updating process by involving designers and constructors in collaborative decision- making.
keywords	Web4D, 4D CAD, 4D Visualization, Construction Schedule, Internet
series	ACADIA
email
last changed	2022/06/07 07:52

_id	7d26
authors	Pearson, D.G., Alexander, C. and Webster, Robin
year	2001
title	Working Memory and Expertise Differences in Design.
source	J. S. Gero, B. Tversky and T. Purcell (eds), 2001, Visual and Spatial Reasoning in Design, II - Key Centre of Design Computing and Cognition, University of Sydney, Australia
summary	The Creative Synthesis task devised by Finke and Slayton(1988) has been widely used as an experimental measure of mentalsynthesis, but previous studies have often failed to demonstrate anysignificant benefits of external support on participants’ performance.This paper discusses a study that examined novice and expert drawers’performance of synthesis using a modified stimuli set that was designedto increase the load on visuo-spatial working memory. The resultsshowed a significant increase in Transformational Complexity(Anderson & Hesltrup, 1993) of patterns produced by the expert groupwhile using sketching. It is argued that experts are more effective atusing sketching interactively to increase complexity, while novices relymore on using it as a simple memory aid.
series	other
email
more	http://www.arch.usyd.edu.au/kcdc/conferences/vr01/
last changed	2003/05/02 11:14

_id	acadia23_v2_270
id	acadia23_v2_270
authors	Wu, Renhu; Moriuchi, Shunta; Li, Sihan; Chen, Yinglei; S. Anderson, Jeffrey; King, Nathan; Stuart-Smith, Robert
year	2023
title	Dynamic Slip Casting: An Efficient Robotic Approach to Geometrically Variable Ceramic Part Production
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 2: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-0-3]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 270-280.
summary	Clay slip is renowned for its versatility, enabling seamless molding, casting, and firing processes that facilitate the production of precisely-shaped and diverse products with varied sizes. However, its limitation in producing variable components without new molds presents challenges for integration into architectural practices where variability is often advantageous. This paper introduces an innovative slip casting approach that allows for the production of diverse clay forms using a single mold by employing a 6-axis articulated robot to rotate the mold during the solidification process. A simulation program predicts the solidified slip's shape in realtime, and a customized end effector attaches the mold to a robotic arm and periodically injects additional slip for precise edge control. The proposed method combines traditional slip casting with industrial robotics, offering greater control over geometric qualities without increasing mold demands. This study offers a potential solution for advancing ceramic manufacturing by overcoming conventional limitations, which could offer opportunities for increased innovation and creativity in architecture and beyond.
series	ACADIA
type	paper
email
last changed	2024/12/20 09:12

_id	0830
authors	Ball, A. A.
year	1980
title	How to Make the Bicubic Patch Work Using Reparametrisation
source	1980 ? 11 p. includes bibliography
summary	This paper comprises a series of examples in numerical surface definition, loosely strung together, to show the practical limitations of the bicubic patch and how they can be overcome by reparametrisation. The concept of reparametrisation is more general than that used in computer- aided geometric design insofar as the reparametrisation is modeled in addition to the basic parametric equation
keywords	CAD, computational geometry, curved surfaces, parametrization
series	CADline
last changed	2003/06/02 13:58

_id	cf2011_p170
id	cf2011_p170
authors	Barros, Mário; Duarte José, Chaparro Bruno
year	2011
title	Thonet Chairs Design Grammar: a Step Towards the Mass Customization of Furniture
source	Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 181-200.
summary	The paper presents the first phase of research currently under development that is focused on encoding Thonet design style into a generative design system using a shape grammar. The ultimate goal of the work is the design and production of customizable chairs using computer assisted tools, establishing a feasible practical model of the paradigm of mass customization (Davis, 1987). The current research step encompasses the following three steps: (1) codification of the rules describing Thonet design style into a shape grammar; (2) implementing the grammar into a computer tool as parametric design; and (3) rapid prototyping of customized chair designs within the style. Future phases will address the transformation of the Thonet’s grammar to create a new style and the production of real chair designs in this style using computer aided manufacturing. Beginning in the 1830’s, Austrian furniture designer Michael Thonet began experimenting with forming steam beech, in order to produce lighter furniture using fewer components, when compared with the standards of the time. Using the same construction principles and standardized elements, Thonet produced different chairs designs with a strong formal resemblance, creating his own design language. The kit assembly principle, the reduced number of elements, industrial efficiency, and the modular approach to furniture design as a system of interchangeable elements that may be used to assemble different objects enable him to become a pioneer of mass production (Noblet, 1993). The most paradigmatic example of the described vision of furniture design is the chair No. 14 produced in 1858, composed of six structural elements. Due to its simplicity, lightness, ability to be stored in flat and cubic packaging for individual of collective transportation, respectively, No. 14 became one of the most sold chairs worldwide, and it is still in production nowadays. Iconic examples of mass production are formally studied to provide insights to mass customization studies. The study of the shape grammar for the generation of Thonet chairs aimed to ensure rules that would make possible the reproduction of the selected corpus, as well as allow for the generation of new chairs within the developed grammar. Due to the wide variety of Thonet chairs, six chairs were randomly chosen to infer the grammar and then this was fine tuned by checking whether it could account for the generation of other designs not in the original corpus. Shape grammars (Stiny and Gips, 1972) have been used with sucesss both in the analysis as in the synthesis of designs at different scales, from product design to building and urban design. In particular, the use of shape grammars has been efficient in the characterization of objects’ styles and in the generation of new designs within the analyzed style, and it makes design rules amenable to computers implementation (Duarte, 2005). The literature includes one other example of a grammar for chair design by Knight (1980). In the second step of the current research phase, the outlined shape grammar was implemented into a computer program, to assist the designer in conceiving and producing customized chairs using a digital design process. This implementation was developed in Catia by converting the grammar into an equivalent parametric design model. In the third phase, physical models of existing and new chair designs were produced using rapid prototyping. The paper describes the grammar, its computer implementation as a parametric model, and the rapid prototyping of physical models. The generative potential of the proposed digital process is discussed in the context of enabling the mass customization of furniture. The role of the furniture designer in the new paradigm and ideas for further work also are discussed.
keywords	Thonet; furniture design; chair; digital design process; parametric design; shape grammar
series	CAAD Futures
email
last changed	2012/02/11 19:21

_id	2fdd
authors	Barsky, Brian A. and Thomas, Spencer W.
year	1980
title	Transpline Curve Representation System
source	April, 1980. 19 p. : ill. includes bibliography
summary	An interactive curve representation system has been developed based on the concept of transforming among several parametric spline curve formulations. The available formulations are the interpolatory spline, uniform B-spline, spline under tension, and NU-spline. The system implementation is described in the context of a sample design session
keywords	computational geometry, curves, representation, splines
series	CADline
last changed	2003/06/02 13:58

_id	a24e
authors	Barstow, David R.
year	1980
title	Knowledge Based Program Construction
source	The Computer Science Library, 34 p.
summary	Some aspects of the implementation of the reachability algorithm are presented.
keywords	Knowledge Base, Programming, Graphs, LISP
series	CADline
last changed	1999/02/15 14:58

_id	8629
authors	Barzilay, Amos
year	1980
title	Human Problem Solving on Master Mind
source	Carnegie Mellon University
summary	The purpose of this work is to analyze the task of playing Master Mind and to examine subjects behaviors on solving that task. The methods and the ideas that are used in the work are the same found in the references for other tasks. The author wants to show that those ideas and methods can be used for that specific task as well. In other words, subjects behave in such a domain as an information processing system. [includes bibliography]
keywords	Psychology, Problem Solving
series	CADline
last changed	1999/02/15 15:10

For more results click below: