Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 3181

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2007_af13
id	sigradi2007_af13
authors	Granero, Adriana Edith; Alicia Barrón; María Teresa Urruti
year	2007
title	Transformations in the educational system, Influence of the Digital Graph [Transformaciones en el sistema educacional, influencia de la Gráfica Digital]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 182-186
summary	The educative proposal was based on the summary attained through experiences piled up during the 2 last semester courses, 2/2006-1/2007. This proposal corresponds to a mix of methodology (by personal attendance / by internet). Founding on the Theory of the Game (Eric Berne 1960) and on different theories such as: Multiple intelligences (Haward Gardner 1983), Emotional Intelligence (Peter Salowey and John Mayer 1990, Goleman 1998), Social Intelligence (Goleman 2006), the Triarchy of Intelligence (Stemberg, R.J. 1985, 1997), “the hand of the human power”, it´s established that the power of the voice, that of the imagination, the reward, the commitment and association produce a significant increase of the productivity (Rosabeth Moss Kanter 2000), aside from the constructive processes of the knowledge (new pedagogical concepts constructivista of Ormrod J.E. 2003 and Tim O´Reilly 2004).
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	e10e
authors	Billon, R. and Rocca, R.
year	1983
title	Comprendre KEOPS: Logiciel de conception assistee par ordinateur en architecture
doi	https://doi.org/10.52842/conf.ecaade.1983.x.s9f
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.19-III.35
summary	En informatique graphique, la méthode la plus courante pour saisir un bâtiment consiste à dêcrire et à stocker en base de données les "pleins": les murs, planchers, composants. Cette procédure est vite fastidieuse, et ne permet pas réellement une véritable conception assistée par ordinateur. KEOPS expérimente une autre méthode qui consiste à décrire l'esquisse par ses "vides", c'est-à-dire les volumes des locaux en trois dimensions. Le logiciel opère automatiquement la transformation "filaire" en composants et ouvrages du bâtiment en exploitant un savoir technologique. Le benéfice? La réduction spectaculaire du temps de saisie et un logiciel de C.A.O. enfin opérationnel en bâtiment.
series	eCAADe
more	http://www.marseille.archi.fr
last changed	2022/06/07 07:50

_id	6259
authors	Kalay, Yehuda E. and Majkowski, Bruce R.
year	1990
title	CAD Technology Transfer: A Case Study
doi	https://doi.org/10.52842/conf.acadia.1990.133
source	From Research to Practice [ACADIA Conference Proceedings] Big Sky (Montana - USA) 4-6 October 1990, pp. 133-143
summary	Transferring innovative university-based research results to the industry or practice that will ultimately use them is an arduous, time-consuming effort. One way to effect this technology transfer is to develop a demonstrable prototype product and then find or form a corporation that can expand the prototype into a full product and market it to the profession. Another way, which can shorten the transfer process, is to "sell" the idea, rather than the product, to a corporation that has the vision, the resources and the technical competency to support its development, with the intent to eventually market it. In this paper, we describe a case study of this latter approach, based on our seven year experience of researching, developing and transferring innovative architectural CAD technology. We describe the birth, growth, and maturity of Worldview, a computer-aided design and modeling system for use by architects. The project was initiated in 1983, and went through five software versions, numerous grants and grant extensions, two granting corporations, and extensive field testing. The software has developed into a mature system, with sufficient functionality appropriate for commercial distribution. The paper describes not only the factual chronology of the project, but also highlights the advantages and drawbacks of market-oriented university research. We conclude with suggestions as to how the process may be improved, and how problems and obstacles can be minimized.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	49a8
authors	McCall, R., Fischer, G. and Morch, A.
year	1990
title	Supporting Reflection-in-Action in the Janus Design Environment
source	The Electronic Design Studio: Architectural Knowledge and Media in the Computer Era [CAAD Futures ‘89 Conference Proceedings / ISBN 0-262-13254-0] Cambridge (Massachusetts / USA), 1989, pp. 247-259
summary	We have developed a computer-based design aid called Janus, which is based on a model of computer-supported design that we think has significance for the future of architectural education. Janus utilizes a knowledge-based approach to link a graphic construction system to hypertext. This allows the computer to make useful comments on the solutions that students construct in a CAD-like environment. These comments contain information intended to make students think more carefully about what they are doing while they are doing it. In other words, Janus promotes what Donald Schon has called "reflection-inaction" (Schon, 1983). The Janus design environment is named for the Roman god with a pair of faces looking in opposite directions. In our case the faces correspond to complementary design activities we call construction and argumentation. Construction is the activity of graphically creating the form of the solution e.g., a building. Traditionally this has been done with tracing paper, pencils, and pens. Argumentation is the activity of reasoning about the problem and its solution. This includes such things as considering what to do next, what alternative courses of action are available, and which course of action to choose. Argumentation is mostly verbal but partly graphical.
series	CAAD Futures
last changed	1999/04/03 17:58

_id	2387
authors	Akin, Omer, Baykan, Can D. and Rao, Radha D.
year	1983
title	Searching in the UNIX Directory
source	December, 1983. 19 p. : ill., tables. includes bibliography
summary	The structure of the directory space and subjects search behaviors in the UNIX operating system environment are examined. Protocol analysis with two subjects and survey of the contents of the directory space of all users of E-VAX and X-VAX systems in the Architecture and Computer Science Systems at Carnegie Mellon University were conducted. Depth first search characterized both the organization of the directories and the behavior of the subjects. Single step as opposed to multiple step traversal of the directory tree was also prevalent in the subject`s behaviors. Recommendations for system friendliness, in term of reusability, orientation, robustness, and consistency are developed
keywords	UNIX, user interface, protocol analysis
series	CADline
email
last changed	2003/06/02 13:58

_id	41af
authors	Barnhill, Robert E.
year	1983
title	A Survey of the Representation and Design of Surfaces
source	IEEE Computer Graphics and Applications. October, 1983. vol. 3: pp. 9-16 : ill. includes bibliography
summary	The approach of devising robust surface methods applicable to arbitrarily located data was taken by the CAGD Group at the University of Utah. Adopting two broad classes of methods suitable for solving the problems (i.e., problems for which simplifying geometric assumptions cannot be made): (1) surface interpolants defined over triangles or tetrahedra and (2) distance-weighted interpolants. Interactive computer graphics was used to display surfaces for adequate visualization. Although some figures were given, it must be kept in mind that some 3-D medium, or at least motion, is necessary to understand surfaces
keywords	computational geometry, computer graphics, representation, curved surfaces, mathematics
series	CADline
last changed	2003/06/02 10:24

_id	0105
authors	Bossan, Mario and Ronchi, Alfredo M.
year	1989
title	Presentazione Esperienza Didattica del Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali - Politecnico di Milano
doi	https://doi.org/10.52842/conf.ecaade.1989.x.x4i
source	CAAD: Education - Research and Practice [eCAADe Conference Proceedings / ISBN 87-982875-2-4] Aarhus (Denmark) 21-23 September 1989, pp. 9.8.1-9.8.19
summary	Didactic and research experience developed at the "Dipartimento di Ingegneria dei Sistemi Edilizi e Territoriali del Politecnico di Milano" in the environment of Computer Aided Architectural Design (CAAD). From the early part of the 1980's, using initially at an experimental level the resources available at the departmental centre of calculation various applications of CAD techniques in the building sector have been effected at DISET (Dipartimento di Ingegneria del Politecnico di Milano). During 1983, after a three year period of experimenting with these systems, it was decided to organise and activate a small computer aided design centre, within the department, the use of which was reserved for dissertation and research students.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	8c67
authors	Brachman, Ronald J., Levesque, Hector J. and Fikes, Richard E.
year	1983
title	Krypton : A Functional Approach to Knowledge Representation
source	IEEE Computer. IEEE Computer Society, October, 1983. vol. 16: pp. 67-73 : ill. includes bibliography
summary	While the basic ideas of frame systems are straight forward, complication arise in their design. A design strategy was developed and have been implemented in a representation system called Krypton. Krypton distinguishes between definitional and factual information by using both frame- based and logic-based languages. The result is a system defined in functional not structural terms
keywords	AI, frames, knowledge, representation, systems
series	CADline
last changed	2003/06/02 10:24

_id	6647
authors	Buxton, W., M.R. Lamb and Sherman, D. (et al)
year	1983
title	Towards a Comprehensive User Interface Management System
source	computer Graphics. July, 1983. vol. 17: pp. 35-42 : ill. includes bibliography
summary	A UIMS developed at the University of Toronto is presented. The system has two main components. The first is a set of tools to support the design and implementation of interactive graphics programs. The second is a run-time support package which handles interactions between the system and the user (things such as hit detection, event detection, screen updates, and procedure invocation), and provides facilities for logging user interactions for later protocol analysis. The design / implementation tool is a preprocessor, called MENULAY, which permits the applications programmer to use interactive graphics techniques to design graphics menus and their functionality. The output of this preprocessor is high- level code which can be compiled with application-specific routines. User interactions with the resulting executable module are then handled by the run-time support package. The presentation works through an example from design to execution in a step-by-step manner
keywords	software, user interface, management, computer graphics
series	CADline
last changed	2003/06/02 13:58

_id	e7b8
authors	Dahl, Veronica
year	1983
title	Logic Programming as a Representation of Knowledge
source	IEEE Computer. IEEE Computer Society, October, 1983. vol. 16: pp. 106-110 : ill. includes bibliography
summary	Logic has traditionally provided a firm conceptual framework for representing knowledge. As it can formally deal with the notion of logical consequence, the introduction of Prolog has made it possible to represent knowledge in terms of logic and also to expect appropriate inferences to be drawn from it automatically. This article illustrates and explores these ideas with respect to two central representational issues: problem solving knowledge and database knowledge. The technical aspects of both subjects have been covered elsewhere (Kowalski, R. Logic for problem solving, North- Holland pub. 1979 ; Dahl, V. on database system development through logic ACM Trans.vol.7/no.3/Mar.1982 pp.102). This explanation uses simple, nontechnical terms
keywords	PROLOG, knowledge, representation, logic, programming, problem solving, database
series	CADline
last changed	1999/02/12 15:08

_id	ab23
authors	Dromey, Geoff R.
year	1983
title	Before Programming : On Teaching Introductory Computing
source	1983? 10 p. includes bibliography
summary	In comparison with most other human intellectual activities, computing is in its infancy despite the progress we seem to have made in such a short time. Consequently, there has been insufficient time for the evolution of 'best ways' to transmit computing concepts and skills. It is therefore prudent to look to more mature disciplines for some guidelines on effective ways to introduce computing to beginners. In this respect the discipline of teaching people to read and write in a natural language is highly relevant. A fundamental characteristic of this latter discipline is that a substantial amount of time is devoted to teaching people to read long before they are asked to write stories, essays, etc. In teaching computing people seem to have overlooked or neglected what corresponds to the reading stage in the process of learning to read and write. In the discussion which follows the author looks at ways of economically giving students the 'computer-reading experience' and preparing them for the more difficult tasks of algorithm design and computer problem-solving
keywords	programming, education,
series	CADline
last changed	2003/06/02 13:58

_id	273f
authors	Elcock, E.W.
year	1983
title	How Complete are Knowledge Representation Systems?
source	IEEE Computer. IEEE computer society, October, 1983. vol. 16: pp. 114-118. includes bibliography
summary	Prolog, the most feasible of the first-order logic systems, has intriguing analogies with Absys, short for Aberdeen System, an assertative programming system developed in 1968. In this article, the issue of incompleteness is explored by comparing aspects of the two systems, and the incompleteness resulting from any serious use of Prolog as a vehicle for a knowledge-based system is addressed
keywords	PROLOG, algorithms, knowledge, systems, languages
series	CADline
last changed	2003/06/02 13:58

_id	8e9b
authors	Foque, R. and Hashimshony, R.
year	1983
title	Experience of a Design Exercise, Making Use of the Programs: Goal, Bible & Gloss (Developed by Abacus)
doi	https://doi.org/10.52842/conf.ecaade.1983.x.m4v
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. II.1-II.9
summary	A 6 weeks (2 days a week) design exercise, making use of the above programs, was held the last bimester in the Faculty of Architecture in TH Delft. This exercise was an experimental one for the students, as well as for the teachers. As the exercise had an experimental character, it is clear that a lot should be learned from that experience, both from its positive and negative outcomes. The paper will try to evaluate on this point for the benefit of those intending to set up similar projects.
keywords	Experimental Exercise
series	eCAADe
last changed	2022/06/07 07:50

_id	sigradi2006_e028c
id	sigradi2006_e028c
authors	Griffith, Kenfield; Sass, Larry and Michaud, Dennis
year	2006
title	A strategy for complex-curved building design:Design structure with Bi-lateral contouring as integrally connected ribs
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 465-469
summary	Shapes in designs created by architects such as Gehry Partners (Shelden, 2002), Foster and Partners, and Kohn Peterson and Fox rely on computational processes for rationalizing complex geometry for building construction. Rationalization is the reduction of a complete geometric shape into discrete components. Unfortunately, for many architects the rationalization is limited reducing solid models to surfaces or data on spread sheets for contractors to follow. Rationalized models produced by the firms listed above do not offer strategies for construction or digital fabrication. For the physical production of CAD description an alternative to the rationalized description is needed. This paper examines the coupling of digital rationalization and digital fabrication with physical mockups (Rich, 1989). Our aim is to explore complex relationships found in early and mid stage design phases when digital fabrication is used to produce design outcomes. Results of our investigation will aid architects and engineers in addressing the complications found in the translation of design models embedded with precision to constructible geometries. We present an algorithmically based approach to design rationalization that supports physical production as well as surface production of desktop models. Our approach is an alternative to conventional rapid prototyping that builds objects by assembly of laterally sliced contours from a solid model. We explored an improved product description for rapid manufacture as bilateral contouring for structure and panelling for strength (Kolarevic, 2003). Infrastructure typically found within aerospace, automotive, and shipbuilding industries, bilateral contouring is an organized matrix of horizontal and vertical interlocking ribs evenly distributed along a surface. These structures are monocoque and semi-monocoque assemblies composed of structural ribs and skinning attached by rivets and adhesives. Alternative, bi-lateral contouring discussed is an interlocking matrix of plywood strips having integral joinery for assembly. Unlike traditional methods of building representations through malleable materials for creating tangible objects (Friedman, 2002), this approach constructs with the implication for building life-size solutions. Three algorithms are presented as examples of rationalized design production with physical results. The first algorithm [Figure 1] deconstructs an initial 2D curved form into ribbed slices to be assembled through integral connections constructed as part of the rib solution. The second algorithm [Figure 2] deconstructs curved forms of greater complexity. The algorithm walks along the surface extracting surface information along horizontal and vertical axes saving surface information resulting in a ribbed structure of slight double curvature. The final algorithm [Figure 3] is expressed as plug-in software for Rhino that deconstructs a design to components for assembly as rib structures. The plug-in also translates geometries to a flatten position for 2D fabrication. The software demonstrates the full scope of the research exploration. Studies published by Dodgson argued that innovation technology (IvT) (Dodgson, Gann, Salter, 2004) helped in solving projects like the Guggenheim in Bilbao, the leaning Tower of Pisa in Italy, and the Millennium Bridge in London. Similarly, the method discussed in this paper will aid in solving physical production problems with complex building forms. References Bentley, P.J. (Ed.). Evolutionary Design by Computers. Morgan Kaufman Publishers Inc. San Francisco, CA, 1-73 Celani, G, (2004) “From simple to complex: using AutoCAD to build generative design systems” in: L. Caldas and J. Duarte (org.) Implementations issues in generative design systems. First Intl. Conference on Design Computing and Cognition, July 2004 Dodgson M, Gann D.M., Salter A, (2004), “Impact of Innovation Technology on Engineering Problem Solving: Lessons from High Profile Public Projects,” Industrial Dynamics, Innovation and Development, 2004 Dristas, (2004) “Design Operators.” Thesis. Massachusetts Institute of Technology, Cambridge, MA, 2004 Friedman, M, (2002), Gehry Talks: Architecture + Practice, Universe Publishing, New York, NY, 2002 Kolarevic, B, (2003), Architecture in the Digital Age: Design and Manufacturing, Spon Press, London, UK, 2003 Opas J, Bochnick H, Tuomi J, (1994), “Manufacturability Analysis as a Part of CAD/CAM Integration”, Intelligent Systems in Design and Manufacturing, 261-292 Rudolph S, Alber R, (2002), “An Evolutionary Approach to the Inverse Problem in Rule-Based Design Representations”, Artificial Intelligence in Design ’02, 329-350 Rich M, (1989), Digital Mockup, American Institute of Aeronautics and Astronautics, Reston, VA, 1989 Schön, D., The Reflective Practitioner: How Professional Think in Action. Basic Books. 1983 Shelden, D, (2003), “Digital Surface Representation and the Constructability of Gehry’s Architecture.” Diss. Massachusetts Institute of Technology, Cambridge, MA, 2003 Smithers T, Conkie A, Doheny J, Logan B, Millington K, (1989), “Design as Intelligent Behaviour: An AI in Design Thesis Programme”, Artificial Intelligence in Design, 293-334 Smithers T, (2002), “Synthesis in Designing”, Artificial Intelligence in Design ’02, 3-24 Stiny, G, (1977), “Ice-ray: a note on the generation of Chinese lattice designs” Environmental and Planning B, volume 4, pp. 89-98
keywords	Digital fabrication; bilateral contouring; integral connection; complex-curve
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	610b
authors	Hall, R.N.
year	1983
title	The Use of Gable OMS (Object Modelling System) in the Building Design ProcessThe Use of Gable OMS (Object Modelling System) in the Building Design Process
doi	https://doi.org/10.52842/conf.ecaade.1983.x.b6t
source	Proceedings of the International Conference eCAADe [European Computer Aided Architectural Design Education] Brussels (Belgium) 1983, pp. III.1-III.18
summary	GABLE CAD SYSTEMS comprise a suite of integrated sub-systems, one of which is OMS. The use of OMS in the development of a building design enables three dimensional graphical modelling of objects associated with buildings. Thus furniture, fittings and fixtures may be located within any room in a building or outside a building or in relation to other groups of objects unrelated to a building. Once located, objects and building may be seen in 2D plan and elevation/section projection or 3D projection (perspectives, axonometrics, isometrics, etc.). In this way furniture, people, cars, trees,landscape objects may all be modelled and graphically represented in addition to the modelling capabilities enabled using GABLE BMS (Building Modelling System). These graphically represented 2D and 3D views of objects can then be passed into GABLE IDS for further embellishment, annotation or dimensioning to produce detailed working drawings.
keywords	Three Dimensional Graphical Modelling
series	eCAADe
last changed	2022/06/07 07:50

_id	4b8e
authors	Kalay, Yehuda E. and Eastman, Charles M.
year	1983
title	Shape Operation : An Algorithm For Binary Combining Boundary Model Solids
source	November, 1983. 30 p. : ill. includes bibliography
summary	The attractiveness of shape operators to end-users of geometric modeling systems stems from their intuitive clarity. Their implementation, however, is one of the most difficult algorithms in computational geometry. This complexity is further increased by the special properties of surfaces, such as orientation, that places the algorithm in the domain of manifold theory more than of set theory. A theoretical base for applying the set-theoretic operators of union, intersection and difference to spatial domains is presented, along with an algorithm that is successful in negotiating these complexities and all their special cases (in particular the presence of coincidental surfaces). The general principles of representing solids through their bounding surfaces and topics in manifold theory and boolean algebra relevant to understanding the algorithm are also discussed. The algorithm has been successfully implemented in three different geometric modeling systems over a period of four years. Some example of its application are included
keywords	algorithms, boolean operations, solid modeling, B-rep, geometric modeling, topology
series	CADline
email
last changed	2003/05/17 10:18

_id	4d66
authors	Kalay, Yehuda E.
year	1983
title	A Relational Database for Non-Manipulative Representation of Solid Objects
source	Computer Aided Design September, 1983. vol. 15: pp. 271-276 : ill. includes bibliography.
summary	Being the heart of any solid modeling system, much effort has been spent on formulating the data models which represent the shape of a polyhedral solid object within the computer in an accurate, unique and complete manner. This paper presents an example relational model as a complementary logical schema for viewing the shape database. It facilitates compact storage and supports non-manipulative query operations through the projection, selection and join operators defined for the relational model, without requiring expert knowledge of the manipulative structure. The flexibility of the relational model, compared with that of the hierarchical, manipulative one, allows easy extensibility and the association of non- geometric attributes with each data item
keywords	solid modeling, polyhedra, relational database, representation
series	CADline
email
last changed	2003/06/02 13:58

_id	e26b
authors	Kalay, Yehuda E.
year	1983
title	Modeling Polyhedral Solids Bounded by Multi-Curved Parametric Surfaces
source	Computer Aided Design May, 1983. Vol. 15: pp. 141-146 : ill. includes bibliography.
summary	An integrated solids modelling system for representing and manipulating objects bounded by bicubic parametric surfaces is presented. Its basic capabilities include the representation of solids through a surface based model, such that the surface underlying any face can be replaced by another surface that has been modelled independently. Other functionalities include scaling, rotation and translation of shapes and their pairwise combination into more complex shapes by means of spatial set operators. This approach integrates within a single system the representation and manipulation of polyhedral solids bounded by multi-curved parametric surfaces, thereby combining solid modelling with surface modelling techniques
keywords	solid modeling, curves, curved surfaces, integration, systems, B-rep, intersection, boolean operations
series	CADline
email
last changed	2003/06/02 10:24

_id	0f6e
authors	Kalay, Yehuda E.
year	1983
title	Modular Menu Mapping and Hit-Testing
source	1983? 17 p. : ill. includes bibliography
summary	This paper introduces a method called MODULAR MENU MAPPING, which rationalizes menu layout and trades menu hit-test time with a look up table, thereby reducing the cost of determining the menu box inclusion of the cursor to a single unit of time. To overcome the problem of space required to store the look-up table, a hybrid method called RUN-LENGTH ENCODING is introduced. It reduces the storage space requirements by substituting the two-dimensional look-up table with a linear vector. It does however, require some search, which is nevertheless still much cheaper then the full search of a non-mapped menu
keywords	user interface, computer graphics
series	CADline
email
last changed	2003/06/02 13:58

_id	8892
authors	Maver, T.W.
year	1983
title	CAAD in Onderwijs en Onderzoek [CAAD in Teaching and Design]
source	Proceedings of THE-CAAD3 Symposium, Eindhoven
summary	Students currently in schools of architecture will be at the peak of their careers around the year 2000. The pressure on the schools to provide an education and training which will stand the student in good stead between now and then is considerable. In an increasing number of departments of architecture and building science, importance is being placed on the concept of modelling: i.e. the development and use of models of the operational behaviour and aesthetic character of design proposals which will allow appraisal of how real buildings will performing the real world.
series	other
email
last changed	2003/06/08 23:01

For more results click below: